/* * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x500000 ] * * Copyright 2012 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * Neither the name of Freescale Semiconductor nor the * names of its contributors may be used to endorse or promote products * derived from this software without specific prior written permission. * * * ALTERNATIVELY, this software may be distributed under the terms of the * GNU General Public License ("GPL") as published by the Free Software * Foundation, either version 2 of that License or (at your option) any * later version. * * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ fman@500000 { fman1_rx_0x08: port@88000 { cell-index = <0x8>; compatible = "fsl,fman-v3-port-rx"; reg = <0x88000 0x1000>; }; fman1_tx_0x28: port@a8000 { cell-index = <0x28>; compatible = "fsl,fman-v3-port-tx"; reg = <0xa8000 0x1000>; }; ethernet@e0000 { cell-index = <0>; compatible = "fsl,fman-memac"; reg = <0xe0000 0x1000>; fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>; ptp-timer = <&ptp_timer1>; pcsphy-handle = <&pcsphy8>, <&pcsphy8>; pcs-handle-names = "sgmii", "qsgmii"; }; mdio@e1000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xe1000 0x1000>; fsl,erratum-a011043; /* must ignore read errors */ pcsphy8: ethernet-phy@0 { reg = <0x0>; }; }; };