/* * T1024 QDS Device Tree Source * * Copyright 2014 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * Neither the name of Freescale Semiconductor nor the * names of its contributors may be used to endorse or promote products * derived from this software without specific prior written permission. * * * ALTERNATIVELY, this software may be distributed under the terms of the * GNU General Public License ("GPL") as published by the Free Software * Foundation, either version 2 of that License or (at your option) any * later version. * * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /include/ "t102xsi-pre.dtsi" / { model = "fsl,T1024QDS"; compatible = "fsl,T1024QDS"; #address-cells = <2>; #size-cells = <2>; interrupt-parent = <&mpic>; reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; bman_fbpr: bman-fbpr { size = <0 0x1000000>; alignment = <0 0x1000000>; }; qman_fqd: qman-fqd { size = <0 0x400000>; alignment = <0 0x400000>; }; qman_pfdr: qman-pfdr { size = <0 0x2000000>; alignment = <0 0x2000000>; }; }; ifc: localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x2000>; ranges = <0 0 0xf 0xe8000000 0x08000000 2 0 0xf 0xff800000 0x00010000 3 0 0xf 0xffdf0000 0x00008000>; nor@0,0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; reg = <0x0 0x0 0x8000000>; bank-width = <2>; device-width = <1>; }; nand@2,0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,ifc-nand"; reg = <0x2 0x0 0x10000>; }; board-control@3,0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,tetra-fpga", "fsl,fpga-qixis"; reg = <3 0 0x300>; ranges = <0 3 0 0x300>; }; }; memory { device_type = "memory"; }; dcsr: dcsr@f00000000 { ranges = <0x00000000 0xf 0x00000000 0x01072000>; }; bportals: bman-portals@ff4000000 { ranges = <0x0 0xf 0xf4000000 0x2000000>; }; qportals: qman-portals@ff6000000 { ranges = <0x0 0xf 0xf6000000 0x2000000>; }; soc: soc@ffe000000 { ranges = <0x00000000 0xf 0xfe000000 0x1000000>; reg = <0xf 0xfe000000 0 0x00001000>; spi@110000 { flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q128a11", "jedec,spi-nor"; /* 16MB */ reg = <0>; spi-max-frequency = <10000000>; }; flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "sst,sst25wf040", "jedec,spi-nor"; /* 512KB */ reg = <1>; spi-max-frequency = <10000000>; }; flash@2 { #address-cells = <1>; #size-cells = <1>; compatible = "eon,en25s64", "jedec,spi-nor"; /* 8MB */ reg = <2>; spi-max-frequency = <10000000>; }; slic@2 { compatible = "maxim,ds26522"; reg = <2>; spi-max-frequency = <2000000>; }; slic@3 { compatible = "maxim,ds26522"; reg = <3>; spi-max-frequency = <2000000>; }; }; i2c@118000 { pca9547@77 { compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; #size-cells = <0>; i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0x0>; eeprom@50 { compatible = "atmel,24c512"; reg = <0x50>; }; eeprom@51 { compatible = "atmel,24c02"; reg = <0x51>; }; eeprom@57 { compatible = "atmel,24c02"; reg = <0x57>; }; }; i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <0x2>; ina220@40 { compatible = "ti,ina220"; reg = <0x40>; shunt-resistor = <1000>; }; ina220@41 { compatible = "ti,ina220"; reg = <0x41>; shunt-resistor = <1000>; }; }; i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <0x3>; adt7461@4c { /* Thermal Monitor */ compatible = "adi,adt7461"; reg = <0x4c>; }; eeprom@55 { compatible = "atmel,24c02"; reg = <0x55>; }; eeprom@56 { compatible = "atmel,24c512"; reg = <0x56>; }; eeprom@57 { compatible = "atmel,24c512"; reg = <0x57>; }; }; }; rtc@68 { compatible = "dallas,ds3232"; reg = <0x68>; interrupts = <0x5 0x1 0 0>; }; }; }; pci0: pcie@ffe240000 { reg = <0xf 0xfe240000 0 0x10000>; ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000 0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x10000000 0x01000000 0 0x00000000 0x01000000 0 0x00000000 0 0x00010000>; }; }; pci1: pcie@ffe250000 { reg = <0xf 0xfe250000 0 0x10000>; ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000 0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x10000000 0x01000000 0 0x00000000 0x01000000 0 0x00000000 0 0x00010000>; }; }; pci2: pcie@ffe260000 { reg = <0xf 0xfe260000 0 0x10000>; ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; pcie@0 { ranges = <0x02000000 0 0xe0000000 0x02000000 0 0xe0000000 0 0x10000000 0x01000000 0 0x00000000 0x01000000 0 0x00000000 0 0x00010000>; }; }; }; #include "t1024si-post.dtsi"