/* * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) * * Copyright 2011 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * Neither the name of Freescale Semiconductor nor the * names of its contributors may be used to endorse or promote products * derived from this software without specific prior written permission. * * * ALTERNATIVELY, this software may be distributed under the terms of the * GNU General Public License ("GPL") as published by the Free Software * Foundation, either version 2 of that License or (at your option) any * later version. * * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ &board_ifc { nor@0,0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; reg = <0x0 0x0 0x2000000>; bank-width = <2>; device-width = <1>; partition@40000 { /* 256KB for DTB Image */ reg = <0x00040000 0x00040000>; label = "NOR DTB Image"; }; partition@80000 { /* 7 MB for Linux Kernel Image */ reg = <0x00080000 0x00700000>; label = "NOR Linux Kernel Image"; }; partition@800000 { /* 20MB for JFFS2 based Root file System */ reg = <0x00800000 0x01400000>; label = "NOR JFFS2 Root File System"; }; partition@1f00000 { /* This location must not be altered */ /* 512KB for u-boot Bootloader Image */ /* 512KB for u-boot Environment Variables */ reg = <0x01f00000 0x00100000>; label = "NOR U-Boot Image"; read-only; }; }; ifc_nand: nand@1,0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,ifc-nand"; reg = <0x1 0x0 0x10000>; }; cpld@3,0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,p1010rdb-cpld"; reg = <0x3 0x0 0x0000020>; bank-width = <1>; device-width = <1>; }; }; &board_soc { i2c@3000 { eeprom@50 { compatible = "st,24c256"; reg = <0x50>; }; rtc@68 { compatible = "pericom,pt7c4338"; reg = <0x68>; }; }; i2c@3100 { eeprom@52 { compatible = "atmel,24c01"; reg = <0x52>; }; }; spi@7000 { flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spansion,s25sl12801"; reg = <0>; spi-max-frequency = <40000000>; partition@0 { /* 1MB for u-boot Bootloader Image */ /* 1MB for Environment */ reg = <0x0 0x00100000>; label = "SPI Flash U-Boot Image"; read-only; }; partition@100000 { /* 512KB for DTB Image */ reg = <0x00100000 0x00080000>; label = "SPI Flash DTB Image"; }; partition@180000 { /* 4MB for Linux Kernel Image */ reg = <0x00180000 0x00400000>; label = "SPI Flash Linux Kernel Image"; }; partition@580000 { /* 4MB for Compressed RFS Image */ reg = <0x00580000 0x00400000>; label = "SPI Flash Compressed RFSImage"; }; partition@980000 { /* 6.5MB for JFFS2 based RFS */ reg = <0x00980000 0x00680000>; label = "SPI Flash JFFS2 RFS"; }; }; }; usb@22000 { phy_type = "utmi"; dr_mode = "host"; }; mdio@24000 { phy0: ethernet-phy@0 { reg = <0x1>; }; phy1: ethernet-phy@1 { reg = <0x0>; }; phy2: ethernet-phy@2 { reg = <0x2>; }; tbi-phy@3 { device_type = "tbi-phy"; reg = <0x3>; }; }; mdio@25000 { tbi0: tbi-phy@11 { reg = <0x11>; device_type = "tbi-phy"; }; }; mdio@26000 { tbi1: tbi-phy@11 { reg = <0x11>; device_type = "tbi-phy"; }; }; enet0: ethernet@b0000 { phy-handle = <&phy0>; phy-connection-type = "rgmii-id"; }; enet1: ethernet@b1000 { phy-handle = <&phy1>; tbi-handle = <&tbi0>; phy-connection-type = "sgmii"; }; enet2: ethernet@b2000 { phy-handle = <&phy2>; tbi-handle = <&tbi1>; phy-connection-type = "sgmii"; }; };