blob: c3cd35ae38a246d8f639d70573e2c0874a490d74 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
|
NXP i.MX8MM EVK Evaluation Board
================================
Board comes with:
* 2GiB of LPDDR4 RAM
* 16GiB eMMC
Not including booting via serial, the device can boot from either SD or eMMC.
Downloading DDR PHY Firmware
----------------------------
As a part of DDR intialization routine NXP i.MX8MM EVK requires and
uses several binary firmware blobs that are distributed under a
separate EULA and cannot be included in Barebox. In order to obtain
them do the following::
wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
chmod +x firmware-imx-8.0.bin
./firmware-imx-8.0.bin
Executing that file should produce a EULA acceptance dialog as well as
result in the following files:
- lpddr4_pmu_train_1d_dmem.bin
- lpddr4_pmu_train_1d_imem.bin
- lpddr4_pmu_train_2d_dmem.bin
- lpddr4_pmu_train_2d_imem.bin
As a last step of this process those files need to be placed in
"firmware/"::
for f in lpddr4_pmu_train_1d_dmem.bin \
lpddr4_pmu_train_1d_imem.bin \
lpddr4_pmu_train_2d_dmem.bin \
lpddr4_pmu_train_2d_imem.bin; \
do \
cp firmware-imx-8.0/firmware/ddr/synopsys/${f} \
firmware/${f}; \
done
DDR Configuration Code
======================
The following two files:
- arch/arm/boards/nxp-imx8mq-evk/ddr_init.c
- arch/arm/boards/nxp-imx8mq-evk/ddrphy_train.c
were obtained by running i.MX 8M DDR Tool that can be found here:
https://community.nxp.com/docs/DOC-340179
Only minimal amount of necessary changes were made to those files.
All of the "impedance matching" code is located in "ddr.h".
Build barebox
=============
make imx_v8_defconfig
make
Start barebox
=============
The resulting image file is images/barebox-nxp-imx8mm-evk.img. Configure the
board for serial download mode as printed on the PCB. You can start barebox with
the imx-usb-loader tool that comes with barebox like this:
./scripts/imx/imx-usb-loader images/barebox-nxp-imx8mm-evk.img
|