blob: 0feb22257ae403504d16f68770c97524a643a7d9 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
|
Phytec phyCORE-i.MX31 CPU module PCM-037
========================================
The CPU module
--------------
http://www.phytec.eu/europe/products/modules-overview/phycore/produktdetails/p/phycore-imx31-2.html
This CPU card is based on a Freescale i.MX31 CPU. The card in
configuration -0000REU is shipped with:
* 128 MiB synchronous dynamic RAM (DDR type)
* 64 MiB NAND flash
* 32 MiB NOR flash
* 512 kiB SRAM
* 4kiB EEPROM
* MMU, FPU
* Serial, Ethernet, USB (OTG), I2C, SPI, MMC/SD/SDIO, PCMCIA/CF, RTC
Supported baseboards
--------------------
Supported baseboards are:
* Silica / Phytec PCM-970 via phyMAP-i.MX31, PMA-001
How to get barebox for Phytec's phyCORE-i.MX31
----------------------------------------------
Using the default configuration:
.. code-block:: sh
make ARCH=arm pcm037_defconfig
Build the binary image:
.. code-block:: sh
make ARCH=arm CROSS_COMPILE=armv5compiler
.. note:: replace ``armv5compiler`` with your ARM v5 cross compiler prefix,
e.g.: ``arm-1136jfs-linux-gnueabi-``
The resulting binary image to be flashed will be ``barebox.bin``, whereas
the file named just ``barebox`` is an ELF executable for ARM.
|