1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
|
/*
* Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
*
* Copyright (C) 2007 Sascha Hauer, Pengutronix
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
*/
#include <common.h>
#include <net.h>
#include <init.h>
#include <envfs.h>
#include <environment.h>
#include <asm/armlinux.h>
#include <generated/mach-types.h>
#include <partition.h>
#include <fs.h>
#include <fcntl.h>
#include <io.h>
#include <mach/hardware.h>
#include <nand.h>
#include <linux/sizes.h>
#include <linux/mtd/nand.h>
#include <mach/at91_pmc.h>
#include <mach/board.h>
#include <mach/iomux.h>
#include <gpio.h>
#include <mach/io.h>
#include <mach/at91sam9_smc.h>
static struct atmel_nand_data nand_pdata = {
.ale = 21,
.cle = 22,
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PA22,
.enable_pin = AT91_PIN_PD15,
.ecc_mode = NAND_ECC_SOFT,
#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
.bus_width_16 = 1,
#else
.bus_width_16 = 0,
#endif
.on_flash_bbt = 1,
};
static struct sam9_smc_config ek_nand_smc_config = {
.ncs_read_setup = 0,
.nrd_setup = 1,
.ncs_write_setup = 0,
.nwe_setup = 1,
.ncs_read_pulse = 3,
.nrd_pulse = 3,
.ncs_write_pulse = 3,
.nwe_pulse = 3,
.read_cycle = 5,
.write_cycle = 5,
.mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
.tdf_cycles = 2,
};
static void ek_add_device_nand(void)
{
/* setup bus-width (8 or 16) */
if (nand_pdata.bus_width_16)
ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
else
ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&nand_pdata);
}
static struct macb_platform_data macb_pdata = {
.phy_interface = PHY_INTERFACE_MODE_RMII,
.phy_addr = 0,
};
#if defined(CONFIG_MCI_ATMEL)
static struct atmel_mci_platform_data __initdata ek_mci_data = {
.bus_width = 4,
.detect_pin = AT91_PIN_PE18,
.wp_pin = AT91_PIN_PE19,
};
static void ek_add_device_mci(void)
{
at91_add_device_mci(1, &ek_mci_data);
}
#else
static void ek_add_device_mci(void) {}
#endif
#ifdef CONFIG_LED_GPIO
struct gpio_led ek_leds[] = {
{
.gpio = AT91_PIN_PC29,
.active_low = 1,
.led = {
.name = "ds2",
},
}, {
.gpio = AT91_PIN_PB7,
.led = {
.name = "ds3",
},
},
};
static void ek_device_add_leds(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(ek_leds); i++) {
at91_set_gpio_output(ek_leds[i].gpio, ek_leds[i].active_low);
led_gpio_register(&ek_leds[i]);
}
led_set_trigger(LED_TRIGGER_HEARTBEAT, &ek_leds[1].led);
}
#else
static void ek_device_add_leds(void) {}
#endif
#if defined(CONFIG_USB_GADGET_DRIVER_AT91)
/*
* USB Device port
*/
static struct at91_udc_data __initdata ek_udc_data = {
.vbus_pin = AT91_PIN_PA25,
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
static void ek_add_device_udc(void)
{
at91_add_device_udc(&ek_udc_data);
}
#else
static void ek_add_device_udc(void) {}
#endif
/*
* LCD Controller
*/
#if defined(CONFIG_DRIVER_VIDEO_ATMEL)
static struct fb_videomode at91_tft_vga_modes[] = {
{
.name = "TX09D50VM1CCA @ 60",
.refresh = 60,
.xres = 240, .yres = 320,
.pixclock = KHZ2PICOS(4965),
.left_margin = 1, .right_margin = 33,
.upper_margin = 1, .lower_margin = 0,
.hsync_len = 5, .vsync_len = 1,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED,
},
};
#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
| ATMEL_LCDC_DISTYPE_TFT \
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
/* Driver datas */
static struct atmel_lcdfb_platform_data ek_lcdc_data = {
.lcdcon_is_backlight = true,
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN,
.default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2,
.guard_time = 1,
.gpio_power_control = AT91_PIN_PA30,
.mode_list = at91_tft_vga_modes,
.num_modes = ARRAY_SIZE(at91_tft_vga_modes),
};
static void ek_add_device_lcdc(void)
{
at91_add_device_lcdc(&ek_lcdc_data);
}
#else
static void ek_add_device_lcdc(void) {}
#endif
static void __init ek_add_device_buttons(void)
{
at91_set_gpio_input(AT91_PIN_PC5, 1);
at91_set_deglitch(AT91_PIN_PC5, 1);
export_env_ull("dfu_button", AT91_PIN_PC5);
at91_set_gpio_input(AT91_PIN_PC4, 1);
at91_set_deglitch(AT91_PIN_PC4, 1);
export_env_ull("right_click", AT91_PIN_PC4);
}
static int at91sam9263ek_mem_init(void)
{
at91_add_device_sdram(0);
return 0;
}
mem_initcall(at91sam9263ek_mem_init);
static int at91sam9263ek_devices_init(void)
{
/*
* PB27 enables the 50MHz oscillator for Ethernet PHY
* 1 - enable
* 0 - disable
*/
at91_set_gpio_output(AT91_PIN_PB27, 1);
gpio_set_value(AT91_PIN_PB27, 1); /* 1- enable, 0 - disable */
ek_add_device_nand();
at91_add_device_eth(0, &macb_pdata);
add_cfi_flash_device(0, AT91_CHIPSELECT_0, 8 * 1024 * 1024, 0);
ek_add_device_mci();
ek_device_add_leds();
ek_add_device_udc();
ek_add_device_buttons();
ek_add_device_lcdc();
if (IS_ENABLED(CONFIG_DRIVER_CFI) && cdev_by_name("nor0")) {
devfs_add_partition("nor0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self");
devfs_add_partition("nor0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env0");
} else if (IS_ENABLED(CONFIG_NAND_ATMEL)) {
devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "at91bootstrap_raw");
dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
devfs_add_partition("nand0", SZ_128K, SZ_256K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
devfs_add_partition("nand0", SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw1");
dev_add_bb_dev("env_raw1", "env1");
}
armlinux_set_architecture(MACH_TYPE_AT91SAM9263EK);
if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT_GENERIC))
defaultenv_append_directory(defaultenv_at91sam9263ek);
return 0;
}
device_initcall(at91sam9263ek_devices_init);
static int at91sam9263ek_console_init(void)
{
barebox_set_model("Atmel at91sam9263-ek");
barebox_set_hostname("at91sam9263-ek");
at91_register_uart(0, 0);
return 0;
}
console_initcall(at91sam9263ek_console_init);
static int at91sam9263ek_main_clock(void)
{
at91_set_main_clock(16367660);
return 0;
}
pure_initcall(at91sam9263ek_main_clock);
|
