1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
|
/*
*
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
* (c) 2010 Eukrea Electromatique, Eric Bénard <eric@eukrea.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <common.h>
#include <init.h>
#include <mach/imx25-regs.h>
#include <mach/imx-pll.h>
#include <mach/esdctl.h>
#include <io.h>
#include <mach/imx-nand.h>
#include <asm/barebox-arm.h>
#include <asm/barebox-arm-head.h>
#include <asm/sections.h>
#include <asm-generic/memory_layout.h>
#include <asm/system.h>
void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
{
uint32_t r;
register uint32_t loops = 0x20000;
arm_cpu_lowlevel_init();
arm_setup_stack(MX25_IRAM_BASE_ADDR + MX25_IRAM_SIZE);
/* restart the MPLL and wait until it's stable */
writel(readl(MX25_CCM_BASE_ADDR + MX25_CCM_CCTL) | (1 << 27),
MX25_CCM_BASE_ADDR + MX25_CCM_CCTL);
while (readl(MX25_CCM_BASE_ADDR + MX25_CCM_CCTL) & (1 << 27)) {};
/* Configure dividers and ARM clock source
* ARM @ 400 MHz
* AHB @ 133 MHz
*/
writel(0x20034000, MX25_CCM_BASE_ADDR + MX25_CCM_CCTL);
/* Enable UART1 / FEC / */
/* writel(0x1FFFFFFF, MX25_CCM_BASE_ADDR + CCM_CGCR0);
writel(0xFFFFFFFF, MX25_CCM_BASE_ADDR + CCM_CGCR1);
writel(0x000FDFFF, MX25_CCM_BASE_ADDR + CCM_CGCR2);*/
/* AIPS setup - Only setup MPROTx registers. The PACR default values are good.
* Set all MPROTx to be non-bufferable, trusted for R/W,
* not forced to user-mode.
*/
writel(0x77777777, 0x43f00000);
writel(0x77777777, 0x43f00004);
writel(0x77777777, 0x53f00000);
writel(0x77777777, 0x53f00004);
/* MAX (Multi-Layer AHB Crossbar Switch) setup
* MPR - priority for MX25 is (SDHC2/SDMA)>USBOTG>RTIC>IAHB>DAHB
*/
writel(0x00002143, 0x43f04000);
writel(0x00002143, 0x43f04100);
writel(0x00002143, 0x43f04200);
writel(0x00002143, 0x43f04300);
writel(0x00002143, 0x43f04400);
/* SGPCR - always park on last master */
writel(0x10, 0x43f04010);
writel(0x10, 0x43f04110);
writel(0x10, 0x43f04210);
writel(0x10, 0x43f04310);
writel(0x10, 0x43f04410);
/* MGPCR - restore default values */
writel(0x0, 0x43f04800);
writel(0x0, 0x43f04900);
writel(0x0, 0x43f04a00);
writel(0x0, 0x43f04b00);
writel(0x0, 0x43f04c00);
/* Configure M3IF registers
* M3IF Control Register (M3IFCTL) for MX25
* MRRP[0] = LCDC on priority list (1 << 0) = 0x00000001
* MRRP[1] = MAX1 not on priority list (0 << 1) = 0x00000000
* MRRP[2] = MAX0 not on priority list (0 << 2) = 0x00000000
* MRRP[3] = USB HOST not on priority list (0 << 3) = 0x00000000
* MRRP[4] = SDMA not on priority list (0 << 4) = 0x00000000
* MRRP[5] = SD/ATA/FEC not on priority list (0 << 5) = 0x00000000
* MRRP[6] = SCMFBC not on priority list (0 << 6) = 0x00000000
* MRRP[7] = CSI not on priority list (0 << 7) = 0x00000000
* ----------
* 0x00000001
*/
writel(0x1, 0xb8003000);
/* Speed up NAND controller by adjusting the NFC divider */
r = readl(MX25_CCM_BASE_ADDR + MX25_CCM_PCDR2);
r &= ~0xf;
r |= 0x1;
writel(r, MX25_CCM_BASE_ADDR + MX25_CCM_PCDR2);
/* Skip SDRAM initialization if we run from RAM */
r = get_pc();
if (r > 0x80000000 && r < 0x90000000)
goto out;
/* Init Mobile DDR */
writel(0x0000000E, MX25_ESDCTL_BASE_ADDR + IMX_ESDMISC);
writel(0x00000004, MX25_ESDCTL_BASE_ADDR + IMX_ESDMISC);
__asm__ volatile ("1:\n"
"subs %0, %1, #1\n"
"bne 1b":"=r" (loops):"0" (loops));
writel(0x0029572B, MX25_ESDCTL_BASE_ADDR + IMX_ESDCFG0);
writel(0x92210000, MX25_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
writeb(0xda, MX25_CSD0_BASE_ADDR + 0x400);
writel(0xA2210000, MX25_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
writeb(0xda, MX25_CSD0_BASE_ADDR);
writeb(0xda, MX25_CSD0_BASE_ADDR);
writel(0xB2210000, MX25_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
writeb(0xda, MX25_CSD0_BASE_ADDR + 0x33);
writeb(0xda, MX25_CSD0_BASE_ADDR + 0x1000000);
writel(0x82216080, MX25_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
if (IS_ENABLED(CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND))
imx25_barebox_boot_nand_external();
out:
imx25_barebox_entry(NULL);
}
|
