1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
|
/*
* Copyright (C) 2007 Sascha Hauer, Pengutronix
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
*/
#define pr_fmt(fmt) "babbage: " fmt
#include <common.h>
#include <init.h>
#include <environment.h>
#include <mach/imx51-regs.h>
#include <gpio.h>
#include <asm/armlinux.h>
#include <generated/mach-types.h>
#include <partition.h>
#include <fs.h>
#include <of.h>
#include <fcntl.h>
#include <mach/bbu.h>
#include <nand.h>
#include <notifier.h>
#include <spi/spi.h>
#include <mfd/mc13xxx.h>
#include <io.h>
#include <asm/mmu.h>
#include <mach/imx5.h>
#include <mach/imx-nand.h>
#include <mach/spi.h>
#include <mach/generic.h>
#include <mach/iomux-mx51.h>
#include <mach/devices-imx51.h>
#include <mach/revision.h>
#define MX51_CCM_CACRR 0x10
static void babbage_power_init(struct mc13xxx *mc13xxx)
{
u32 val;
/* Write needed to Power Gate 2 register */
mc13xxx_reg_read(mc13xxx, MC13892_REG_POWER_MISC, &val);
val &= ~0x10000;
mc13xxx_reg_write(mc13xxx, MC13892_REG_POWER_MISC, val);
/* Write needed to update Charger 0 */
mc13xxx_reg_write(mc13xxx, MC13892_REG_CHARGE, 0x0023807F);
/* power up the system first */
mc13xxx_reg_write(mc13xxx, MC13892_REG_POWER_MISC, 0x00200000);
if (imx_silicon_revision() < IMX_CHIP_REV_3_0) {
/* Set core voltage to 1.1V */
mc13xxx_reg_read(mc13xxx, MC13892_REG_SW_0, &val);
val &= ~0x1f;
val |= 0x14;
mc13xxx_reg_write(mc13xxx, MC13892_REG_SW_0, val);
/* Setup VCC (SW2) to 1.25 */
mc13xxx_reg_read(mc13xxx, MC13892_REG_SW_1, &val);
val &= ~0x1f;
val |= 0x1a;
mc13xxx_reg_write(mc13xxx, MC13892_REG_SW_1, val);
/* Setup 1V2_DIG1 (SW3) to 1.25 */
mc13xxx_reg_read(mc13xxx, MC13892_REG_SW_2, &val);
val &= ~0x1f;
val |= 0x1a;
mc13xxx_reg_write(mc13xxx, MC13892_REG_SW_2, val);
} else {
/* Setup VCC (SW2) to 1.225 */
mc13xxx_reg_read(mc13xxx, MC13892_REG_SW_1, &val);
val &= ~0x1f;
val |= 0x19;
mc13xxx_reg_write(mc13xxx, MC13892_REG_SW_1, val);
/* Setup 1V2_DIG1 (SW3) to 1.2 */
mc13xxx_reg_read(mc13xxx, MC13892_REG_SW_2, &val);
val &= ~0x1f;
val |= 0x18;
mc13xxx_reg_write(mc13xxx, MC13892_REG_SW_2, val);
}
if (mc13xxx_revision(mc13xxx) < MC13892_REVISION_2_0) {
/* Set switchers in PWM mode for Atlas 2.0 and lower */
/* Setup the switcher mode for SW1 & SW2*/
mc13xxx_reg_read(mc13xxx, MC13892_REG_SW_4, &val);
val &= ~0x3c0f;
val |= 0x1405;
mc13xxx_reg_write(mc13xxx, MC13892_REG_SW_4, val);
/* Setup the switcher mode for SW3 & SW4 */
mc13xxx_reg_read(mc13xxx, MC13892_REG_SW_5, &val);
val &= ~0xf0f;
val |= 0x505;
mc13xxx_reg_write(mc13xxx, MC13892_REG_SW_5, val);
} else {
/* Set switchers in Auto in NORMAL mode & STANDBY mode for Atlas 2.0a */
/* Setup the switcher mode for SW1 & SW2*/
mc13xxx_reg_read(mc13xxx, MC13892_REG_SW_4, &val);
val &= ~0x3c0f;
val |= 0x2008;
mc13xxx_reg_write(mc13xxx, MC13892_REG_SW_4, val);
/* Setup the switcher mode for SW3 & SW4 */
mc13xxx_reg_read(mc13xxx, MC13892_REG_SW_5, &val);
val &= ~0xf0f;
val |= 0x808;
mc13xxx_reg_write(mc13xxx, MC13892_REG_SW_5, val);
}
/* Set VDIG to 1.65V, VGEN3 to 1.8V, VCAM to 2.5V */
mc13xxx_reg_read(mc13xxx, MC13892_REG_SETTING_0, &val);
val &= ~0x34030;
val |= 0x10020;
mc13xxx_reg_write(mc13xxx, MC13892_REG_SETTING_0, val);
/* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */
mc13xxx_reg_read(mc13xxx, MC13892_REG_SETTING_1, &val);
val &= ~0x1FC;
val |= 0x1F4;
mc13xxx_reg_write(mc13xxx, MC13892_REG_SETTING_1, val);
/* Configure VGEN3 and VCAM regulators to use external PNP */
val = 0x208;
mc13xxx_reg_write(mc13xxx, MC13892_REG_MODE_1, val);
udelay(200);
/* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
val = 0x49249;
mc13xxx_reg_write(mc13xxx, MC13892_REG_MODE_1, val);
udelay(200);
pr_info("initialized PMIC\n");
console_flush();
imx51_init_lowlevel(800);
clock_notifier_call_chain();
}
static int imx51_babbage_init(void)
{
if (!of_machine_is_compatible("fsl,imx51-babbage"))
return 0;
barebox_set_hostname("babbage");
mc13xxx_register_init_callback(babbage_power_init);
armlinux_set_architecture(MACH_TYPE_MX51_BABBAGE);
imx51_bbu_internal_mmc_register_handler("mmc", "/dev/mmc0",
BBU_HANDLER_FLAG_DEFAULT);
return 0;
}
coredevice_initcall(imx51_babbage_init);
#ifdef CONFIG_ARCH_IMX_XLOAD
static int imx51_babbage_xload_init_pinmux(void)
{
static const iomux_v3_cfg_t pinmux[] = {
/* (e)CSPI */
MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
/* (e)CSPI chip select lines */
MX51_PAD_CSPI1_SS1__GPIO4_25,
/* eSDHC 1 */
MX51_PAD_SD1_CMD__SD1_CMD,
MX51_PAD_SD1_CLK__SD1_CLK,
MX51_PAD_SD1_DATA0__SD1_DATA0,
MX51_PAD_SD1_DATA1__SD1_DATA1,
MX51_PAD_SD1_DATA2__SD1_DATA2,
MX51_PAD_SD1_DATA3__SD1_DATA3,
};
mxc_iomux_v3_setup_multiple_pads(ARRAY_AND_SIZE(pinmux));
return 0;
}
coredevice_initcall(imx51_babbage_xload_init_pinmux);
static int imx51_babbage_xload_init_devices(void)
{
static int spi0_chipselects[] = {
IMX_GPIO_NR(4, 25),
};
static struct spi_imx_master spi0_pdata = {
.chipselect = spi0_chipselects,
.num_chipselect = ARRAY_SIZE(spi0_chipselects),
};
static const struct spi_board_info spi0_devices[] = {
{
.name = "mtd_dataflash",
.chip_select = 0,
.max_speed_hz = 25 * 1000 * 1000,
.bus_num = 0,
},
};
imx51_add_mmc0(NULL);
spi_register_board_info(ARRAY_AND_SIZE(spi0_devices));
imx51_add_spi0(&spi0_pdata);
return 0;
}
device_initcall(imx51_babbage_xload_init_devices);
#endif
|
