summaryrefslogtreecommitdiffstats
path: root/arch/arm/boards/karo-tx25/lowlevel.c
blob: b7ff2d44c6a36ad6641425a45022c0145c95f5cb (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
/*
 *
 * (c) 2011 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 */
#include <common.h>
#include <init.h>
#include <mach/imx25-regs.h>
#include <mach/esdctl.h>
#include <io.h>
#include <linux/sizes.h>
#include <mach/imx-nand.h>
#include <mach/esdctl.h>
#include <asm/barebox-arm.h>
#include <asm/barebox-arm-head.h>
#include <asm/system.h>
#include <asm/sections.h>
#include <asm-generic/memory_layout.h>
#include <debug_ll.h>

static inline void setup_uart(void)
{
	void __iomem *uartbase = (void *)MX25_UART1_BASE_ADDR;
	void __iomem *iomuxbase = (void *)MX25_IOMUXC_BASE_ADDR;

	writel(0x0, iomuxbase + 0x174);

	writel(0x00000000, uartbase + 0x80);
	writel(0x00004027, uartbase + 0x84);
	writel(0x00000704, uartbase + 0x88);
	writel(0x00000a81, uartbase + 0x90);
	writel(0x0000002b, uartbase + 0x9c);
	writel(0x00013880, uartbase + 0xb0);
	writel(0x0000047f, uartbase + 0xa4);
	writel(0x0000a259, uartbase + 0xa8);
	writel(0x00000001, uartbase + 0x80);

	putc_ll('>');
}

static inline void __bare_init  setup_sdram(uint32_t base, uint32_t esdctl,
		uint32_t esdcfg)
{
	uint32_t esdctlreg = MX25_ESDCTL_BASE_ADDR + IMX_ESDCTL0;
	uint32_t esdcfgreg = MX25_ESDCTL_BASE_ADDR + IMX_ESDCFG0;

	if (base == 0x90000000) {
		esdctlreg += 8;
		esdcfgreg += 8;
	}

	esdctl |= ESDCTL0_SDE;

	writel(esdcfg, esdcfgreg);
	writel(esdctl | ESDCTL0_SMODE_PRECHARGE, esdctlreg);
	writel(0, base + 1024);
	writel(esdctl | ESDCTL0_SMODE_AUTO_REFRESH, esdctlreg);
	readb(base);
	readb(base);
	writel(esdctl | ESDCTL0_SMODE_LOAD_MODE, esdctlreg);
	writeb(0, base + 0x33);
	writel(esdctl, esdctlreg);
}

static void __bare_init karo_tx25_common_init(void *fdt)
{
	uint32_t r;

	arm_cpu_lowlevel_init();

	/* AIPS setup - Only setup MPROTx registers. The PACR default values are good.
	 * Set all MPROTx to be non-bufferable, trusted for R/W,
	 * not forced to user-mode.
	 */
	writel(0x77777777, 0x43f00000);
	writel(0x77777777, 0x43f00004);
	writel(0x77777777, 0x53f00000);
	writel(0x77777777, 0x53f00004);

	/* MAX (Multi-Layer AHB Crossbar Switch) setup
	 * MPR - priority for MX25 is (SDHC2/SDMA)>USBOTG>RTIC>IAHB>DAHB
	 */
	writel(0x00043210, 0x43f04000);
	writel(0x00043210, 0x43f04100);
	writel(0x00043210, 0x43f04200);
	writel(0x00043210, 0x43f04300);
	writel(0x00043210, 0x43f04400);
	/* SGPCR - always park on last master */
	writel(0x10, 0x43f04010);
	writel(0x10, 0x43f04110);
	writel(0x10, 0x43f04210);
	writel(0x10, 0x43f04310);
	writel(0x10, 0x43f04410);
	/* MGPCR - restore default values */
	writel(0x0, 0x43f04800);
	writel(0x0, 0x43f04900);
	writel(0x0, 0x43f04a00);
	writel(0x0, 0x43f04b00);
	writel(0x0, 0x43f04c00);

	/* Configure M3IF registers
	 * M3IF Control Register (M3IFCTL) for MX25
	 * MRRP[0] = LCDC           on priority list (1 << 0)  = 0x00000001
	 * MRRP[1] = MAX1       not on priority list (0 << 1)  = 0x00000000
	 * MRRP[2] = MAX0       not on priority list (0 << 2)  = 0x00000000
	 * MRRP[3] = USB HOST   not on priority list (0 << 3)  = 0x00000000
	 * MRRP[4] = SDMA       not on priority list (0 << 4)  = 0x00000000
	 * MRRP[5] = SD/ATA/FEC not on priority list (0 << 5)  = 0x00000000
	 * MRRP[6] = SCMFBC     not on priority list (0 << 6)  = 0x00000000
	 * MRRP[7] = CSI        not on priority list (0 << 7)  = 0x00000000
	 *                                                       ----------
	 *                                                       0x00000001
	 */
	writel(0x1, 0xb8003000);

	/* configure ARM clk */
	writel(0x20034000, MX25_CCM_BASE_ADDR + MX25_CCM_CCTL);

	/* enable all the clocks */
	writel(0x1fffffff, MX25_CCM_BASE_ADDR + MX25_CCM_CGCR0);
	writel(0xffffffff, MX25_CCM_BASE_ADDR + MX25_CCM_CGCR1);
	writel(0x000fdfff, MX25_CCM_BASE_ADDR + MX25_CCM_CGCR2);

	setup_uart();

	/* Skip SDRAM initialization if we run from RAM */
	r = get_pc();
	if (r > 0x80000000 && r < 0xa0000000)
		goto out;

	/* set to 3.3v SDRAM */
	writel(0x800, MX25_IOMUXC_BASE_ADDR + 0x454);

	writel(ESDMISC_RST, MX25_ESDCTL_BASE_ADDR + IMX_ESDMISC);

	while (!(readl(MX25_ESDCTL_BASE_ADDR + IMX_ESDMISC) & (1 << 31)));

#define ESDCTLVAL	(ESDCTL0_ROW13 | ESDCTL0_COL9 |	ESDCTL0_DSIZ_15_0 | \
			 ESDCTL0_REF4 | ESDCTL0_PWDT_PRECHARGE_PWDN | ESDCTL0_BL)
#define ESDCFGVAL	(ESDCFGx_tRP_3 | ESDCFGx_tMRD_2 | ESDCFGx_tRAS_6 | \
			 ESDCFGx_tRRD_2 | ESDCFGx_tCAS_3 | ESDCFGx_tRCD_3 | \
			 ESDCFGx_tRC_9)

	setup_sdram(0x80000000, ESDCTLVAL, ESDCFGVAL);
	setup_sdram(0x90000000, ESDCTLVAL, ESDCFGVAL);

	imx25_barebox_boot_nand_external(fdt);

out:
	imx25_barebox_entry(fdt);
}

extern char __dtb_imx25_karo_tx25_start[];

ENTRY_FUNCTION(start_imx25_karo_tx25, r0, r1, r2)
{
	void *fdt;

	arm_setup_stack(MX25_IRAM_BASE_ADDR + MX25_IRAM_SIZE - 8);

	fdt = __dtb_imx25_karo_tx25_start - get_runtime_offset();

	karo_tx25_common_init(fdt);
}