1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
|
/*
* Copyright (C) 2010 Juergen Beisert, Pengutronix <kernel@pengutronix.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <common.h>
#include <init.h>
#include <gpio.h>
#include <environment.h>
#include <errno.h>
#include <asm/armlinux.h>
#include <asm/barebox-arm.h>
#include <io.h>
#include <generated/mach-types.h>
#include <mach/imx-regs.h>
#include <mach/devices.h>
#include <mach/iomux.h>
#include <asm/mmu.h>
/* setup the CPU card internal signals */
static const uint32_t tx28_pad_setup[] = {
/* NAND interface */
GPMI_D0 | VE_3_3V | PULLUP(1),
GPMI_D1 | VE_3_3V | PULLUP(1),
GPMI_D2 | VE_3_3V | PULLUP(1),
GPMI_D3 | VE_3_3V | PULLUP(1),
GPMI_D4 | VE_3_3V | PULLUP(1),
GPMI_D5 | VE_3_3V | PULLUP(1),
GPMI_D6 | VE_3_3V | PULLUP(1),
GPMI_D7 | VE_3_3V | PULLUP(1),
GPMI_READY0 | VE_3_3V | PULLUP(0), /* external PU */
GPMI_CE0N | VE_3_3V | PULLUP(1),
GPMI_RDN | VE_3_3V | PULLUP(1),
GPMI_WRN | VE_3_3V | BITKEEPER(1),
GPMI_ALE | VE_3_3V | PULLUP(1),
GPMI_CLE | VE_3_3V | PULLUP(1),
GPMI_RESETN | VE_3_3V | PULLUP(0), /* external PU */
/* Network interface */
/*
* Note: To setup the external phy in a manner the baseboard
* supports, its configuration is divided into a small part here in
* the CPU card setup and the remaining configuration in the baseboard
* file.
* Here: Switch on the power supply to the external phy, but keep its
* reset line low.
*/
/* send a "good morning" to the ext. phy 0 = reset */
ENET0_RX_CLK_GPIO | VE_3_3V | PULLUP(0) | GPIO_OUT | GPIO_VALUE(0),
/* phy power control 1 = on */
PWM4_GPIO | VE_3_3V | GPIO_OUT | PULLUP(0) | GPIO_VALUE(1),
ENET_CLK | VE_3_3V | BITKEEPER(0),
ENET0_MDC | VE_3_3V | PULLUP(0),
ENET0_MDIO | VE_3_3V | PULLUP(0),
ENET0_TXD0 | VE_3_3V | PULLUP(0),
ENET0_TXD1 | VE_3_3V | PULLUP(0),
ENET0_TX_EN | VE_3_3V | PULLUP(0),
ENET0_TX_CLK | VE_3_3V | BITKEEPER(0),
};
extern void base_board_init(void);
static int tx28_devices_init(void)
{
int i;
if (barebox_arm_machine() != MACH_TYPE_TX28)
return 0;
/* initizalize gpios */
for (i = 0; i < ARRAY_SIZE(tx28_pad_setup); i++)
imx_gpio_mode(tx28_pad_setup[i]);
armlinux_set_architecture(MACH_TYPE_TX28);
base_board_init();
imx28_add_nand();
return 0;
}
device_initcall(tx28_devices_init);
|
