summaryrefslogtreecommitdiffstats
path: root/arch/arm/boards/karo-tx53/board.c
blob: e5c27aac93175571c4c339cd0b68973b04951037 (plain) (blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
/*
 * Copyright (C) 2012 Sascha Hauer, Pengutronix
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 */
#include <common.h>
#include <bootsource.h>
#include <environment.h>
#include <fcntl.h>
#include <fec.h>
#include <fs.h>
#include <init.h>
#include <nand.h>
#include <net.h>
#include <partition.h>
#include <sizes.h>
#include <gpio.h>

#include <generated/mach-types.h>

#include <mach/imx53-regs.h>
#include <mach/iomux-mx53.h>
#include <mach/devices-imx53.h>
#include <mach/generic.h>
#include <mach/imx-nand.h>
#include <mach/iim.h>
#include <mach/imx5.h>
#include <mach/imx-flash-header.h>
#include <mach/bbu.h>

#include <asm/armlinux.h>
#include <io.h>
#include <asm/mmu.h>

static struct fec_platform_data fec_info = {
	.xcv_type = PHY_INTERFACE_MODE_RMII,
};

static iomux_v3_cfg_t tx53_pads[] = {
	/* UART1 */
	MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
	MX53_PAD_PATA_DMACK__UART1_RXD_MUX,

	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,

	MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
	MX53_PAD_PATA_CS_1__UART3_RXD_MUX,

	/* setup FEC PHY pins for GPIO function */
	MX53_PAD_FEC_REF_CLK__GPIO1_23,
	MX53_PAD_FEC_MDC__GPIO1_31,
	MX53_PAD_FEC_MDIO__GPIO1_22,
	MX53_PAD_FEC_RXD0__GPIO1_27,
	MX53_PAD_FEC_RXD1__GPIO1_26,
	MX53_PAD_FEC_RX_ER__GPIO1_24,
	MX53_PAD_FEC_TX_EN__GPIO1_28,
	MX53_PAD_FEC_TXD0__GPIO1_30,
	MX53_PAD_FEC_TXD1__GPIO1_29,
	MX53_PAD_FEC_CRS_DV__GPIO1_25,

	/* FEC PHY reset */
	MX53_PAD_PATA_DA_0__GPIO7_6,
	/* FEC PHY power */
	MX53_PAD_EIM_D20__GPIO3_20,

	/* SD1 */
	MX53_PAD_SD1_CMD__ESDHC1_CMD,
	MX53_PAD_SD1_CLK__ESDHC1_CLK,
	MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,

	/* SD1_CD */
	MX53_PAD_EIM_D24__GPIO3_24,

	MX53_PAD_GPIO_3__I2C3_SCL,
	MX53_PAD_GPIO_6__I2C3_SDA,

	MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12,
	MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13,
	MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14,
	MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15,
	MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16,
	MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17,
	MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18,
	MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19,
	MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC,
	MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC,
	MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK,
};

#define TX53_SD1_CD			IMX_GPIO_NR(3, 24)

static struct esdhc_platform_data tx53_sd1_data = {
	.cd_gpio = TX53_SD1_CD,
	.cd_type = ESDHC_CD_GPIO,
	.wp_type = ESDHC_WP_NONE,
};

struct imx_nand_platform_data nand_info = {
	.width		= 1,
	.hw_ecc		= 1,
	.flash_bbt	= 1,
};

#define FEC_POWER_GPIO		IMX_GPIO_NR(3, 20)
#define FEC_RESET_GPIO		IMX_GPIO_NR(7, 6)

static struct tx53_fec_gpio_setup {
	iomux_v3_cfg_t pad;
	unsigned gpio:9,
		dir:1,
		level:1;
} tx53_fec_gpios[] = {
	{ MX53_PAD_PATA_DA_0__GPIO7_6, FEC_RESET_GPIO,	   1, 0, }, /* PHY reset */
	{ MX53_PAD_EIM_D20__GPIO3_20, FEC_POWER_GPIO,	   1, 1, }, /* PHY power enable */
	{ MX53_PAD_FEC_REF_CLK__GPIO1_23, IMX_GPIO_NR(1, 23), 0, }, /* ENET_CLK */
	{ MX53_PAD_FEC_MDC__GPIO1_31, IMX_GPIO_NR(1, 31), 1, 0, }, /* MDC */
	{ MX53_PAD_FEC_MDIO__GPIO1_22, IMX_GPIO_NR(1, 22), 1, 0, }, /* MDIO */
	{ MX53_PAD_FEC_RXD0__GPIO1_27, IMX_GPIO_NR(1, 27), 1, 1, }, /* Mode0/RXD0 */
	{ MX53_PAD_FEC_RXD1__GPIO1_26, IMX_GPIO_NR(1, 26), 1, 1, }, /* Mode1/RXD1 */
	{ MX53_PAD_FEC_RX_ER__GPIO1_24, IMX_GPIO_NR(1, 24), 0, }, /* RX_ER */
	{ MX53_PAD_FEC_TX_EN__GPIO1_28, IMX_GPIO_NR(1, 28), 1, 0, }, /* TX_EN */
	{ MX53_PAD_FEC_TXD0__GPIO1_30, IMX_GPIO_NR(1, 30), 1, 0, }, /* TXD0 */
	{ MX53_PAD_FEC_TXD1__GPIO1_29, IMX_GPIO_NR(1, 29), 1, 0, }, /* TXD1 */
	{ MX53_PAD_FEC_CRS_DV__GPIO1_25, IMX_GPIO_NR(1, 25), 1, 1, }, /* Mode2/CRS_DV */
};

static iomux_v3_cfg_t tx53_fec_pads[] = {
	MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
	MX53_PAD_FEC_MDC__FEC_MDC,
	MX53_PAD_FEC_MDIO__FEC_MDIO,
	MX53_PAD_FEC_RXD0__FEC_RDATA_0,
	MX53_PAD_FEC_RXD1__FEC_RDATA_1,
	MX53_PAD_FEC_RX_ER__FEC_RX_ER,
	MX53_PAD_FEC_TX_EN__FEC_TX_EN,
	MX53_PAD_FEC_TXD0__FEC_TDATA_0,
	MX53_PAD_FEC_TXD1__FEC_TDATA_1,
	MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
};

static inline void tx53_fec_init(void)
{
	int i;

	/* Configure LAN8700 pads as GPIO and set up
	 * necessary strap options for PHY
	 */
	for (i = 0; i < ARRAY_SIZE(tx53_fec_gpios); i++) {
		struct tx53_fec_gpio_setup *gs = &tx53_fec_gpios[i];

		if (gs->dir)
			gpio_direction_output(gs->gpio, gs->level);
		else
			gpio_direction_input(gs->gpio);

		mxc_iomux_v3_setup_pad(gs->pad);
	}

	/*
	 *Turn on phy power, leave in reset state
	 */
	gpio_set_value(FEC_POWER_GPIO, 1);

	/*
	 * Wait some time to let the phy activate the internal regulator
	 */
	mdelay(10);

	/*
	 * Deassert reset, phy latches the rest of bootstrap pins
	 */
	gpio_set_value(FEC_RESET_GPIO, 1);

	/* LAN7800 has an internal Power On Reset (POR) signal (OR'ed with
	 * the external RESET signal) which is deactivated 21ms after
	 * power on and latches the strap options.
	 * Delay for 22ms to ensure, that the internal POR is inactive
	 * before reconfiguring the strap pins.
	 */
	mdelay(22);

	/*
	 * The phy is ready, now configure imx51 pads for fec operation
	 */
	mxc_iomux_v3_setup_multiple_pads(tx53_fec_pads,
			ARRAY_SIZE(tx53_fec_pads));
}

static int tx53_devices_init(void)
{
	imx53_iim_register_fec_ethaddr();
	tx53_fec_init();
	imx53_add_fec(&fec_info);
	imx53_add_mmc0(&tx53_sd1_data);
	imx53_add_nand(&nand_info);

	armlinux_set_architecture(MACH_TYPE_TX53);

	/* rev xx30 can boot from nand or USB */
	imx53_bbu_internal_nand_register_handler("nand-xx30",
		BBU_HANDLER_FLAG_DEFAULT, SZ_512K);

	/* rev 1011 can boot from MMC/SD, other bootsource currently unknown */
	imx53_bbu_internal_mmc_register_handler("mmc-1011", "/dev/disk0", 0);

	return 0;
}

device_initcall(tx53_devices_init);

static int tx53_part_init(void)
{
	const char *envdev;

	switch (bootsource_get()) {
	case BOOTSOURCE_MMC:
		devfs_add_partition("disk0", 0x00000, SZ_512K, DEVFS_PARTITION_FIXED, "self0");
		devfs_add_partition("disk0", SZ_512K, SZ_1M, DEVFS_PARTITION_FIXED, "env0");
		envdev = "MMC";
		break;
	case BOOTSOURCE_NAND:
	default:
		devfs_add_partition("nand0", 0x00000, 0x80000, DEVFS_PARTITION_FIXED, "self_raw");
		dev_add_bb_dev("self_raw", "self0");
		devfs_add_partition("nand0", 0x80000, 0x100000, DEVFS_PARTITION_FIXED, "env_raw");
		dev_add_bb_dev("env_raw", "env0");
		envdev = "NAND";
		break;
	}

	printf("Using environment in %s\n", envdev);

	return 0;
}
late_initcall(tx53_part_init);

static int tx53_console_init(void)
{
	mxc_iomux_v3_setup_multiple_pads(tx53_pads, ARRAY_SIZE(tx53_pads));

	if (!IS_ENABLED(CONFIG_TX53_REV_XX30))
		imx53_init_lowlevel(1000);

	barebox_set_model("Ka-Ro TX53");
	barebox_set_hostname("tx53");

	imx53_add_uart0();
	return 0;
}
console_initcall(tx53_console_init);