summaryrefslogtreecommitdiffstats
path: root/arch/arm/boards/phycard-a-l1/pca-a-l1.c
blob: 907198d7835ff0a15947b461638f2894949a9848 (plain) (blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
/**
 * @file
 * @brief Board Initialization routines for the phyCARD-A-L1
 *
 * FileName: arch/arm/boards/phycard-a-l1/pca-a-l1.c
 *
 * This board is based on OMAP3530.
 * More on OMAP3530 (including documentation can be found here):
 * http://focus.ti.com/docs/prod/folders/print/omap3530.html
 *
 * This file provides initialization in two stages:
 * @li Boot time initialization - just get SDRAM working.
 * This is run from SRAM - so no case constructs and global vars can be used.
 * @li Run time initialization - this is for the rest of the initializations
 * such as flash, uart etc.
 *
 * Boot time initialization includes:
 * @li SDRAM initialization.
 * @li Pin Muxing relevant for the EVM.
 *
 * Run time initialization includes
 * @li serial @ref serial_ns16550.c driver device definition
 *
 * Originally from arch/arm/boards/omap/board-beagle.c
 */

/*
 * Copyright (C) 2011 Phytec Messtechnik GmbH - http://www.phytec.de/
 * Juergen Kilb <j.kilb@phytec.de>
 *
 * based on code from Texas Instruments / board-beagle.c
 * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
 * Sanjeev Premi <premi@ti.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <common.h>
#include <console.h>
#include <driver.h>
#include <errno.h>
#include <init.h>
#include <nand.h>
#include <ns16550.h>
#include <partition.h>
#include <sizes.h>
#include <asm/armlinux.h>
#include <asm/io.h>
#include <generated/mach-types.h>
#include <linux/err.h>
#include <mach/control.h>
#include <mach/gpmc.h>
#include <mach/gpmc_nand.h>
#include <mach/omap_hsmmc.h>
#include <mach/xload.h>
#include <mach/omap3-mux.h>
#include <mach/sdrc.h>
#include <mach/silicon.h>
#include <mach/sys_info.h>
#include <mach/syslib.h>

#define SMC911X_BASE 0x2c000000

/* Slower full frequency range default timings for x32 operation */
#define SDP_SDRC_SHARING	0x00000100
/* Diabling power down mode using CKE pin */
#define SDP_SDRC_POWER_POP	0x00000081
/* rkw - need to find of 90/72 degree recommendation for speed like before. */
#define SDP_SDRC_DLLAB_CTRL ((DLL_ENADLL << 3) | \
	(DLL_LOCKDLL << 2) | (DLL_DLLPHASE_90 << 1))

/* used to create an array of memory configuartions. */
struct sdrc_config {
	u32	cs_cfg;
	u32	mcfg;
	u32	mr;
	u32	actim_ctrla;
	u32	actim_ctrlb;
	u32	rfr_ctrl;
} const sdrc_config[] = {
/* max cs_size for autodetection, common timing */
/* 2x256MByte, 14 Rows, 10 Columns , RBC (BAL=2) */
{ 0x00000004, 0x03590099, 0x00000032, 0x9A9DB4C6, 0x00011216, 0x0004e201},
/* MT46H32M32LF 2x128MByte, 13 Rows, 10 Columns */
{ 0x00000001, 0x02584099, 0x00000032, 0x9A9DB4C6, 0x00011216, 0x0004e201},
/* MT46H64M32LF 1x256MByte, 14 Rows, 10 Columns */
{ 0x00000002, 0x03588099, 0x00000032, 0x629DB4C6, 0x00011113, 0x0004e201},
/* MT64H128M32L2 2x256MByte, 14 Rows, 10 Columns */
{ 0x00000002, 0x03588099, 0x00000032, 0x629DB4C6, 0x00011113, 0x0004e201},
};

/*
 * Boot-time initialization(s)
 */

/*********************************************************************
 * init_sdram_ddr() - Init DDR controller.
 *********************************************************************/
void init_sdram_ddr(void)
{
	/* reset sdrc controller */
	writel(SOFTRESET, SDRC_REG(SYSCONFIG));
	wait_on_value(1<<0, 1<<0, SDRC_REG(STATUS), 12000000);
	writel(0, SDRC_REG(SYSCONFIG));

	/* setup sdrc to ball mux */
	writel(SDP_SDRC_SHARING, SDRC_REG(SHARING));
	writel(SDP_SDRC_POWER_POP, SDRC_REG(POWER));

	/* set up dll */
	writel(SDP_SDRC_DLLAB_CTRL, SDRC_REG(DLLA_CTRL));
	sdelay(0x2000);	/* give time to lock */

}
/*********************************************************************
 * config_sdram_ddr() - Init DDR on dev board.
 *********************************************************************/
void config_sdram_ddr(u8 cs, u8 cfg)
{

	writel(sdrc_config[cfg].mcfg, SDRC_REG(MCFG_0) + (0x30 * cs));
	writel(sdrc_config[cfg].actim_ctrla, SDRC_REG(ACTIM_CTRLA_0) + (0x28 * cs));
	writel(sdrc_config[cfg].actim_ctrlb, SDRC_REG(ACTIM_CTRLB_0) + (0x28 * cs));
	writel(sdrc_config[cfg].rfr_ctrl, SDRC_REG(RFR_CTRL_0) + (0x30 * cs));

	writel(CMD_NOP, SDRC_REG(MANUAL_0) + (0x30 * cs));

	sdelay(5000);

	writel(CMD_PRECHARGE, SDRC_REG(MANUAL_0) + (0x30 * cs));
	writel(CMD_AUTOREFRESH, SDRC_REG(MANUAL_0) + (0x30 * cs));
	writel(CMD_AUTOREFRESH, SDRC_REG(MANUAL_0) + (0x30 * cs));

	/* set mr0 */
	writel(sdrc_config[cfg].mr, SDRC_REG(MR_0) + (0x30 * cs));

	sdelay(2000);
}

/**
 * @brief Initialize the SDRC module
 * Initialisation for 1x256MByte but normally
 * done by x-loader.
 * @return void
 */
static void pcaal1_sdrc_init(void)
{
	u32 test0, test1;
	char cfg;

	init_sdram_ddr();

	config_sdram_ddr(0, 0); /* 256MByte at CS0 */
	config_sdram_ddr(1, 0); /* 256MByte at CS1 */

	test0 = get_ram_size((long *) 0x80000000, SZ_256M);
	test1 = get_ram_size((long *) 0xA0000000, SZ_256M);

	/* mask out lower nible, its not tested with
	in common/memsize.c */
	test1 &= 0xfffffff0;

	if ((test1 > 0) && (test1 != test0))
		hang();

	cfg = -1; /* illegal configuration found */

	if (test1 == 0) {
		init_sdram_ddr();
		writel((sdrc_config[(uchar) cfg].mcfg & 0xfffc00ff), SDRC_REG(MCFG_1));

		/* 1 x 256MByte */
		if (test0 == SZ_256M)
			cfg = 2;

		if (cfg != -1) {
			config_sdram_ddr(0, cfg);
			writel(sdrc_config[(uchar) cfg].cs_cfg, SDRC_REG(CS_CFG));
		}
		return;
	}

	/* reinit both cs with correct size */
	/* 2 x 128MByte */
	if (test0 == SZ_128M)
		cfg = 1;
	/* 2 x 256MByte */
	if (test0 == SZ_256M)
		cfg = 3;

	if (cfg != -1) {
		init_sdram_ddr();
		writel(sdrc_config[(uchar) cfg].cs_cfg, SDRC_REG(CS_CFG));
		config_sdram_ddr(0, cfg);
		config_sdram_ddr(1, cfg);
	}
}

/**
 * @brief Do the necessary pin muxing required for phyCARD-A-L1.
 * Some pins in OMAP3 do not have alternate modes.
 * We don't program these pins.
 *
 * See @ref MUX_VAL for description of the muxing mode.
 *
 * @return void
 */
static void pcaal1_mux_config(void)
{
	/*
	 * Serial Interface
	 */
	MUX_VAL(CP(UART3_CTS_RCTX),	(IEN  | PTD | EN  | M0));
	MUX_VAL(CP(UART3_RTS_SD),	(IDIS | PTD | DIS | M0));
	MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTD | EN  | M0));
	MUX_VAL(CP(UART3_TX_IRTX),	(IDIS | PTD | DIS | M0));

	/* GPMC */
	MUX_VAL(CP(GPMC_A1),		(IDIS | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_A2),		(IDIS | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_A3),		(IDIS | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_A4),		(IDIS | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_A5),		(IDIS | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_A6),		(IDIS | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_A7),		(IDIS | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_A8),		(IDIS | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_A9),		(IDIS | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_A10),		(IDIS | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_D0),		(IEN  | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_D1),		(IEN  | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_D2),		(IEN  | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_D3),		(IEN  | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_D4),		(IEN  | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_D5),		(IEN  | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_D6),		(IEN  | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_D7),		(IEN  | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_D8),		(IEN  | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_D9),		(IEN  | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_D10),		(IEN  | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_D11),		(IEN  | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_D12),		(IEN  | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_D13),		(IEN  | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_D14),		(IEN  | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_D15),		(IEN  | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0));
	MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0));
	MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0));
	MUX_VAL(CP(GPMC_NWE),		(IDIS | PTD | DIS | M0));
	MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTD | DIS | M0));
	MUX_VAL(CP(GPMC_NWP),		(IEN  | PTD | DIS | M0));
	MUX_VAL(CP(GPMC_WAIT0),		(IEN  | PTU | EN  | M0));

	/* ETH_PME (GPIO_55) */
	MUX_VAL(CP(GPMC_NCS4),		(IDIS | PTU | EN  | M4));
	/* #CS5 (Ethernet) */
	MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTU | EN  | M0));
	/* ETH_FIFO_SEL (GPIO_57) */
	MUX_VAL(CP(GPMC_NCS6),		(IDIS | PTD | EN  | M4));
	/* ETH_AMDIX_EN (GPIO_58) */
	MUX_VAL(CP(GPMC_NCS7),		(IDIS | PTU | EN  | M4));
	/* ETH_nRST (GPIO_64) */
	MUX_VAL(CP(GPMC_WAIT2),		(IDIS | PTU | EN  | M4));

	/* HSMMC1 */
	MUX_VAL(CP(MMC1_CLK),		(IDIS | PTU | EN  | M0));
	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | EN  | M0));
	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | EN  | M0));
	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | EN  | M0));
	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | EN  | M0));
	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | EN  | M0));

	/* USBOTG_nRST (GPIO_63) */
	MUX_VAL(CP(GPMC_WAIT1),		(IDIS | PTU | EN  | M4));

	/* USBH_nRST (GPIO_65) */
	MUX_VAL(CP(GPMC_WAIT3),		(IDIS | PTU | EN  | M4));
}

/**
 * @brief The basic entry point for board initialization.
 *
 * This is called as part of machine init (after arch init).
 * This is again called with stack in SRAM, so not too many
 * constructs possible here.
 *
 * @return void
 */
static int pcaal1_board_init(void)
{
	int in_sdram = running_in_sdram();

	omap3_core_init();

	pcaal1_mux_config();
	/* Dont reconfigure SDRAM while running in SDRAM! */
	if (!in_sdram)
		pcaal1_sdrc_init();

	return 0;
}
pure_initcall(pcaal1_board_init);

/*
 * Run-time initialization(s)
 */
static struct NS16550_plat serial_plat = {
	.clock	= 48000000,      /* 48MHz (APLL96/2) */
	.shift	= 2,
};

/**
 * @brief Initialize the serial port to be used as console.
 *
 * @return result of device registration
 */
static int pcaal1_init_console(void)
{
	add_ns16550_device(DEVICE_ID_DYNAMIC, OMAP_UART3_BASE, 1024, IORESOURCE_MEM_8BIT,
			   &serial_plat);

	return 0;
}
console_initcall(pcaal1_init_console);

#ifdef CONFIG_DRIVER_NET_SMC911X
/** GPMC timing for our SMSC9221 device */
static struct gpmc_config smsc_cfg = {
	.cfg = {
		0x41001000,	/*CONF1 */
		0x00040500,	/*CONF2 */
		0x00000000,	/*CONF3 */
		0x04000500,	/*CONF4 */
		0x05050505,	/*CONF5 */
		0x000002c1,	/*CONF6 */
	},
	.base = SMC911X_BASE,
	/* GPMC address map as small as possible */
	.size = GPMC_SIZE_16M,
};

/*
 * Routine: setup_net_chip
 * Description: Setting up the configuration GPMC registers specific to the
 *            Ethernet hardware.
 */
static void pcaal1_setup_net_chip(void)
{
	gpmc_cs_config(5, &smsc_cfg);
}
#endif

static int pcaal1_mem_init(void)
{

#ifdef CONFIG_OMAP_GPMC
	/*
	 * WP is made high and WAIT1 active Low
	 */
	gpmc_generic_init(0x10);
#endif
	add_mem_device("sram0", OMAP_SRAM_BASE, 60 * SZ_1K,
				   IORESOURCE_MEM_WRITEABLE);

	arm_add_mem_device("ram0", OMAP_SDRC_CS0, get_sdr_cs_size(SDRC_CS0_OSET));
	printf("found %s at SDCS0\n", size_human_readable(get_sdr_cs_size(SDRC_CS0_OSET)));

	if ((get_sdr_cs_size(SDRC_CS1_OSET) != 0) && (get_sdr_cs1_base() != OMAP_SDRC_CS0)) {
		arm_add_mem_device("ram1", get_sdr_cs1_base(), get_sdr_cs_size(SDRC_CS1_OSET));
		printf("found %s at SDCS1\n", size_human_readable(get_sdr_cs_size(SDRC_CS1_OSET)));
	}

	return 0;
}
mem_initcall(pcaal1_mem_init);

#ifdef CONFIG_MCI_OMAP_HSMMC
struct omap_hsmmc_platform_data pcaal1_hsmmc_plat = {
	.f_max = 26000000,
};
#endif

static struct gpmc_nand_platform_data nand_plat = {
	.device_width = 16,
	.ecc_mode = OMAP_ECC_BCH8_CODE_HW,
	.nand_cfg = &omap3_nand_cfg,
};

static int pcaal1_init_devices(void)
{
	omap_add_gpmc_nand_device(&nand_plat);

#ifdef CONFIG_MCI_OMAP_HSMMC
	add_generic_device("omap-hsmmc", DEVICE_ID_DYNAMIC, NULL, OMAP_MMC1_BASE, SZ_4K,
			   IORESOURCE_MEM, &pcaal1_hsmmc_plat);
#endif

#ifdef CONFIG_DRIVER_NET_SMC911X
	pcaal1_setup_net_chip();
	add_generic_device("smc911x", DEVICE_ID_DYNAMIC, NULL, SMC911X_BASE, SZ_4K,
			   IORESOURCE_MEM, NULL);
#endif

	armlinux_set_bootparams((void *)0x80000100);
	armlinux_set_architecture(MACH_TYPE_PCAAL1);

	return 0;
}
device_initcall(pcaal1_init_devices);

static int pcaal1_late_init(void)
{
#ifdef CONFIG_PARTITION
	devfs_add_partition("nand0", 0x00000, 0x80000, DEVFS_PARTITION_FIXED, "x-loader");
	dev_add_bb_dev("self_raw", "x_loader0");

	devfs_add_partition("nand0", 0x80000, 0x1e0000, DEVFS_PARTITION_FIXED, "self_raw");
	dev_add_bb_dev("self_raw", "self0");

	devfs_add_partition("nand0", 0x260000, 0x20000, DEVFS_PARTITION_FIXED, "env_raw");
	dev_add_bb_dev("env_raw", "env0");
#endif
	return 0;
}
late_initcall(pcaal1_late_init);