path: root/arch/arm/mach-imx/Kconfig

# SPDX-License-Identifier: GPL-2.0-only

if ARCH_IMX

config ARCH_IMX_IMXIMAGE
	bool
	default y
	help
	  if enabled the imx-image tool is compiled

config ARCH_IMX_IMXIMAGE_SSL_SUPPORT
	bool
	help
	  This enables SSL support for the imx-image tool. This is required
	  for created images for HABv3. This adds openssl to the build dependencies

config ARCH_IMX_EXTERNAL_BOOT_NAND
	bool
	depends on ARCH_IMX25 || ARCH_IMX27 || ARCH_IMX31 || ARCH_IMX35
	prompt "Support Starting barebox from NAND in external bootmode"

config BAREBOX_UPDATE_IMX_EXTERNAL_NAND
	bool
	depends on ARCH_IMX_EXTERNAL_BOOT_NAND
	depends on BAREBOX_UPDATE
	depends on MTD
	depends on MTD_WRITE
	default y

config USB_GADGET_DRIVER_ARC_PBL
	bool

config RESET_IMX_SRC
	def_bool y
	depends on ARCH_IMX6 || ARCH_IMX50 || ARCH_IMX51 || ARCH_IMX53

config ARCH_IMX_ATF
	def_bool y
	depends on ARCH_IMX8M || ARCH_IMX9

config ARCH_IMX_ROMAPI
	def_bool y
	depends on ARCH_IMX8M || ARCH_IMX9

config ARCH_IMX_SCRATCHMEM
	def_bool y
	depends on ARCH_IMX8M || ARCH_IMX9

#
# PMIC configuration found on i.MX51 Babbadge board
#
config MACH_FREESCALE_MX51_PDK_POWER
        bool
	select SPI
	select DRIVER_SPI_IMX
	select MFD_MC13XXX

menu "i.MX boards"

config ARCH_IMX1
	bool
	select CPU_ARM920T
	select ARCH_HAS_IMX_GPT
	select PINCTRL_IMX_IOMUX_V1

config ARCH_IMX21
	bool
	select CPU_ARM926T
	select ARCH_HAS_IMX_GPT
	select PINCTRL_IMX_IOMUX_V1

config ARCH_IMX25
	bool
	select CPU_ARM926T
	select ARCH_HAS_FEC_IMX
	select ARCH_HAS_IMX_GPT
	select PINCTRL_IMX_IOMUX_V3

config ARCH_IMX27
	bool
	select CPU_ARM926T
	select ARCH_HAS_FEC_IMX
	select ARCH_HAS_IMX_GPT
	select PINCTRL_IMX_IOMUX_V1

config ARCH_IMX31
	select CPU_V6
	bool
	select ARCH_HAS_IMX_GPT
	select PINCTRL_IMX_IOMUX_V2

config ARCH_IMX35
	bool
	select CPU_V6
	select ARCH_HAS_FEC_IMX
	select ARCH_HAS_IMX_GPT
	select PINCTRL_IMX_IOMUX_V3

config ARCH_IMX50
	bool
	select CPU_V7
	select ARCH_HAS_FEC_IMX
	select ARCH_HAS_IMX_GPT
	select PINCTRL_IMX_IOMUX_V3

config ARCH_IMX51
	bool
	select CPU_V7
	select ARCH_HAS_FEC_IMX
	select ARCH_HAS_IMX_GPT
	select PINCTRL_IMX_IOMUX_V3

config ARCH_IMX53
	bool
	select CPU_V7
	select ARCH_HAS_FEC_IMX
	select ARCH_HAS_IMX_GPT
	select PINCTRL_IMX_IOMUX_V3

config ARCH_IMX6
	bool
	select ARCH_HAS_L2X0
	select ARCH_HAS_FEC_IMX
	select ARCH_HAS_IMX_GPT
	select CPU_V7
	select PINCTRL_IMX_IOMUX_V3
	select OFDEVICE
	select COMMON_CLK_OF_PROVIDER
	select HW_HAS_PCI

config ARCH_IMX6SL
	bool
	select ARCH_IMX6

config ARCH_IMX6SX
	bool
	select ARCH_IMX6

config ARCH_IMX6UL
	bool
	select ARCH_IMX6

config ARCH_IMX7
	bool
	select CPU_V7
	select PINCTRL_IMX_IOMUX_V3
	select OFTREE
	select COMMON_CLK_OF_PROVIDER
	select ARCH_HAS_FEC_IMX
	select ARCH_HAS_IMX_GPT
	select HW_HAS_PCI

config ARCH_IMX8M
	bool
	select CPU_V8
	select PINCTRL_IMX_IOMUX_V3
	select OFTREE
	select COMMON_CLK_OF_PROVIDER
	select ARCH_HAS_FEC_IMX
	select HW_HAS_PCI
	select IMX8M_DRAM
	select PBL_VERIFY_PIGGY if HABV4
	select ARM_USE_COMPRESSED_DTB
	select SOC_BUS
	imply FSL_CAAM_RNG_PBL_INIT if HAVE_OPTEE

config ARCH_IMX8MM
	select ARCH_IMX8M
	bool

config ARCH_IMX8MN
	select ARCH_IMX8M
	bool

config ARCH_IMX8MP
	select ARCH_IMX8M
	bool

config ARCH_IMX8MQ
	select ARCH_IMX8M
	bool

config ARCH_IMX9
	select AHAB
	bool

config ARCH_IMX93
	bool
	select ARCH_IMX9
	select CPU_V8
	select PINCTRL_IMX_IOMUX_V3
	select OFTREE
	select COMMON_CLK_OF_PROVIDER
	select ARM_USE_COMPRESSED_DTB
	select ARCH_HAS_FEC_IMX

config ARCH_VF610
	bool
	select ARCH_HAS_L2X0
	select ARCH_HAS_FEC_IMX
	select CPU_V7
	select PINCTRL
	select OFDEVICE
	select OFTREE
	select COMMON_CLK
	select COMMON_CLK_OF_PROVIDER
	select NVMEM
	select IMX_OCOTP	# Needed for clock adjustement
	select CLOCKSOURCE_ARM_GLOBAL_TIMER

config MACH_ZII_COMMON
	bool

if 32BIT

comment "i.MX1 boards"

config MACH_SCB9328
	bool "Synertronixx scb9328"
	select ARCH_IMX1
	select HAS_DM9000
	help
	  Say Y here if you are using the Synertronixx scb9328 board

comment "i.MX25 boards"

config MACH_TX25
	bool "Ka-Ro TX25"
	select ARCH_IMX25
	select ARCH_IMX_EXTERNAL_BOOT_NAND
	help
	  Say Y here if you are using the Ka-Ro tx25 board

comment "i.MX27 boards"

config MACH_PCA100
	bool "phyCard-i.MX27"
	select ARCH_IMX27
	select ARCH_IMX_EXTERNAL_BOOT_NAND
	help
	  Say Y here if you are using Phytec's phyCard-i.MX27 (pca100) equipped
	  with a Freescale i.MX27 Processor

config MACH_PCM038
	bool "phyCORE-i.MX27"
	select ARCH_IMX27
	select SPI
	select DRIVER_SPI_IMX
	select MFD_MC13XXX
	select ARCH_IMX_EXTERNAL_BOOT_NAND
	help
	  Say Y here if you are using Phytec's phyCORE-i.MX27 (pcm038) equipped
	  with a Freescale i.MX27 Processor

comment "i.MX50 boards"

config MACH_KINDLE_MX50
	bool "i.MX50 based Amazon Kindle 4 and 5"
	select ARCH_IMX50
	select SPI
	select DRIVER_SPI_IMX
	select I2C
	select I2C_IMX
	select MFD_MC13XXX
	select ARM_BOARD_APPEND_ATAG
	select ARM_LINUX
	select OFTREE
	help
	  Say Y here if you are using the fourth or fifth generation Amazon
	  Kindle Model No. D01100 (Kindle Wi-Fi), D01200 (Kindle Touch) or
	  EY21 (Kindle Paperwhite).

comment "i.MX51 boards"

config MACH_CCMX51
	bool "ConnectCore i.MX51"
	select ARCH_IMX51
	select IMX_IIM
	select SPI
	select DRIVER_SPI_IMX
	select MFD_MC13XXX
	help
	  Say Y here if you are using Digi ConnectCore (W)i-i.MX51
	  equipped with a Freescale i.MX51 Processor

config MACH_EFIKA_MX_SMARTBOOK
	bool "Efika MX smartbook"
	select ARCH_IMX51
	select SPI
	select DRIVER_SPI_IMX
	select MFD_MC13XXX
	help
	  Choose this to compile barebox for the Efika MX Smartbook

config MACH_FREESCALE_MX51_PDK
	bool "Freescale i.MX51 PDK"
	select ARCH_IMX51
	select MACH_FREESCALE_MX51_PDK_POWER

comment "i.MX53 boards"

config MACH_CCMX53
	bool "Digi ConnectCore i.MX53"
	select ARCH_IMX53
	select I2C
	help
	  Say Y here if you are using the Digi ConnectCore ccxmx53
	  series SoM

config MACH_FREESCALE_MX53_LOCO
	bool "Freescale i.MX53 LOCO"
	select ARCH_IMX53
	select I2C
	select I2C_IMX
	select MFD_MC13XXX

config MACH_GUF_VINCELL
	bool "Garz-Fricke Vincell"
	select ARCH_IMX53

config MACH_TX53
	bool "Ka-Ro TX53"
	select ARCH_IMX53
	help
	  Say Y here if you are using the Ka-Ro tx53 board

config MACH_TQMA53
	bool "TQ i.MX53 TQMa53"
	select ARCH_IMX53

config MACH_FREESCALE_MX53_VMX53
	bool "Voipac i.MX53"
	select ARCH_IMX53
	help
	  Say Y here if you are using the Voipac Technologies X53-DMM-668
	  module equipped with a Freescale i.MX53 Processor

config MACH_ZII_RDU1
	bool "ZII i.MX51 RDU1"
	select ARCH_IMX51
	select MACH_FREESCALE_MX51_PDK_POWER
	select CRC8
	select MACH_ZII_COMMON
	select ARM_USE_COMPRESSED_DTB

comment "i.MX6 boards"

config MACH_ADVANTECH_ROM_742X
	bool "Advantech ROM 742X"
	select ARCH_IMX6
	select ARM_USE_COMPRESSED_DTB

config MACH_NITROGEN6
	bool "BoundaryDevices Nitrogen6 boards"
	select ARCH_IMX6

config MACH_CM_FX6
	bool "CM FX6"
	select ARCH_IMX6
	select MCI_IMX_ESDHC_PBL

config MACH_REALQ7
	bool "DataModul i.MX6Q Real Qseven Board"
	select ARCH_IMX6

config MACH_DFI_FS700_M60
	bool "DFI i.MX6 FS700 M60 Q7 Board"
	select ARCH_IMX6

config MACH_DIGI_CCIMX6ULSBCPRO
	bool "Digi Internal CC-IMX6UL SBC Pro"
	select ARCH_IMX6
	select ARCH_IMX6UL
	select ARM_USE_COMPRESSED_DTB

config MACH_ELTEC_HIPERCAM
	bool "ELTEC HiPerCam"
	select ARCH_IMX6

config MACH_EMBEDSKY_E9
	bool "Embedsky E9 Mini-PC"
	select ARCH_IMX6
	help
	  Choose this to compile barebox for the Embedsky E9 Mini PC

config MACH_EMBEST_MARSBOARD
	bool "Embest MarSboard"
	select ARCH_IMX6
	select ARM_USE_COMPRESSED_DTB

config MACH_EMBEST_RIOTBOARD
	bool "Embest RIoTboard"
	select ARCH_IMX6
	imply AT803X_PHY

config MACH_SABRELITE
	bool "Freescale i.MX6 Sabre Lite"
	select ARCH_IMX6

config MACH_SABRESD
	bool "Freescale i.MX6 SabreSD"
	select ARCH_IMX6

config MACH_FREESCALE_IMX6SX_SABRESDB
	bool "Freescale i.MX6sx SabreSDB"
	select ARCH_IMX6SX
	select I2C
	select I2C_IMX

config MACH_UDOO
	bool "Freescale i.MX6 UDOO Board"
	select ARCH_IMX6

config MACH_UDOO_NEO
	bool "Freescale i.MX6 UDOO Neo Board (full variant)"
	select ARCH_IMX6SX

config MACH_GUF_SANTARO
	bool "Garz+Fricke Santaro Board"
	select ARCH_IMX6
	select I2C
	select I2C_IMX

config MACH_GW_VENTANA
	bool "Gateworks Ventana SBC"
	select ARCH_IMX6
	select I2C
	select I2C_IMX

config MACH_GRINN_LITEBOARD
	bool "Grinn liteboard"
	select ARCH_IMX6UL

config MACH_TX6X
	bool "Karo TX6x"
	select ARCH_IMX6
	select I2C
	select I2C_IMX

config MACH_KONTRON_SAMX6I
        bool "Kontron sAMX6i"
        select ARCH_IMX6

config MACH_NOVENA
	bool "Kosagi Novena board"
	select ARCH_IMX6
	select ARM_USE_COMPRESSED_DTB
	select DDR_SPD
	select I2C_IMX_EARLY
	select MCI_IMX_ESDHC_PBL
	select USB_GADGET_DRIVER_ARC_PBL

config MACH_NXP_IMX6ULL_EVK
	bool "NXP i.MX6ull EVK Board"
	select ARCH_IMX6UL

config MACH_PHYTEC_SOM_IMX6
        bool "Phytec phyCARD-i.MX6 and phyFLEX-i.MX6"
        select ARCH_IMX6
	select ARCH_IMX6UL
	select I2C
	select I2C_IMX

config MACH_PROTONIC_IMX6
	bool "Protonic-Holland i.MX6 based boards"
	select ARCH_IMX6
	select ARCH_IMX6UL
	select ARM_USE_COMPRESSED_DTB
	select IMX_OCOTP

config MACH_SKOV_IMX6
	bool "Skov IMX6"
	select ARCH_IMX6
	select ARM_USE_COMPRESSED_DTB
	select MCI_IMX_ESDHC_PBL
	select DSA
	select DRIVER_NET_KSZ8873

config MACH_SOLIDRUN_MICROSOM
	bool "SolidRun MicroSOM based devices"
	select ARCH_IMX6

config MACH_TECHNEXION_PICO_HOBBIT
	bool "Technexion Pico Hobbit"
	select ARCH_IMX6
	select ARCH_IMX6UL
	select ARM_USE_COMPRESSED_DTB

config MACH_TECHNEXION_WANDBOARD
	bool "Technexion Wandboard"
	select ARCH_IMX6
	select ARM_USE_COMPRESSED_DTB
	select MCI_IMX_ESDHC_PBL

config MACH_TQMA6X
	bool "TQ tqma6x on mba6x"
	select ARCH_IMX6

config MACH_TQMA6UL
	bool "TQ tqma6ul on mba6ulx"
	select ARCH_IMX6UL
	select ARM_USE_COMPRESSED_DTB
	select BOARD_TQ
	select I2C_IMX_EARLY

config MACH_VARISCITE_MX6
	bool "Variscite i.MX6 Quad SOM"
	select ARCH_IMX6
	select I2C
	select I2C_IMX

config MACH_WEBASTO_CCBV2
	bool "Webasto Common Communication Board V2"
	select ARCH_IMX6UL
	select ARM_USE_COMPRESSED_DTB

config MACH_GK802
	bool "Zealz GK802 Mini PC"
	select ARCH_IMX6

config MACH_ZII_RDU2
	bool "ZII i.MX6Q(+) RDU2"
	select ARCH_IMX6
	select MCI_IMX_ESDHC_PBL
	select MACH_ZII_COMMON
	select ARM_USE_COMPRESSED_DTB

comment "i.MX7 boards"

config MACH_MEERKAT96
	bool "96Boards: i.MX7 Meerkat96"
	select ARCH_IMX7
	select ARM_USE_COMPRESSED_DTB

config MACH_AC_SXB
	bool "Atlas Copco: SXB board"
	select ARCH_IMX7
	select MCI_IMX_ESDHC_PBL
	select ARM_USE_COMPRESSED_DTB

config MACH_WARP7
	bool "NXP i.MX7: element 14 WaRP7 Board"
	select ARCH_IMX7

config MACH_FREESCALE_MX7_SABRESD
	bool "NXP i.MX7 SabreSD Board"
	select ARCH_IMX7
	# Nedded to de-assert reset on Ethernet PHY
	select DRIVER_SPI_GPIO if DRIVER_NET_FEC_IMX
	select GPIO_74164 if DRIVER_NET_FEC_IMX
	help
	  Support for NXP i.MX7 SabreSD board - one of the official
	  i.MX7 evaluation boards from NXP.

	  https://goo.gl/6EKGdk

config MACH_PHYTEC_PHYCORE_IMX7
	bool "Phytec phyCORE i.MX7"
	select ARCH_IMX7

config MACH_VARISCITE_SOM_MX7
	bool "Variscite VAR-SOM-MX7"
	select ARCH_IMX7
	select ARM_USE_COMPRESSED_DTB
	help
	  Support for boards that use a Variscite SOM-MX7, like:
	  - Gossen Metrawatt e143_01

config MACH_ZII_IMX7D_DEV
	bool "ZII i.MX7D based devices"
	select ARCH_IMX7
	select ARM_USE_COMPRESSED_DTB

config MACH_KAMSTRUP_MX7_CONCENTRATOR
	bool "Kamstrup i.MX7 Concentrator"
	select ARCH_IMX7
	select ARM_USE_COMPRESSED_DTB

comment "VF610 boards"

config MACH_VF610_TWR
	bool "Freescale VF610 Tower Board"
	select ARCH_VF610

config MACH_ZII_VF610_DEV
	bool "ZII VF610 Dev Family"
	select ARCH_VF610
	select MACH_ZII_COMMON
	select ARM_USE_COMPRESSED_DTB

endif

if 64BIT

comment "i.MX8M boards"

config MACH_CONGATEC_QMX8P_SOM
	bool
	select ARCH_IMX8MP
	select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
	select FIRMWARE_IMX8MP_ATF
	select ARM_SMCCC
	select MCI_IMX_ESDHC_PBL
	select IMX8M_DRAM
	select I2C_IMX_EARLY

config MACH_KOENIGBAUER_ALPHAJET
	bool "Koenig+Bauer AlphaJet"
	select MACH_CONGATEC_QMX8P_SOM

config MACH_INNOCOMM_WB15
	bool "InnoComm WB15 (i.MX8MM) EVK"
	select ARCH_IMX8MM
	select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
	select FIRMWARE_IMX8MM_ATF
	select ARM_SMCCC
	select MCI_IMX_ESDHC_PBL
	select IMX8M_DRAM
	select I2C_IMX_EARLY
	select USB_GADGET_DRIVER_ARC_PBL
	imply AT803X_PHY

config MACH_KARO_QSXP_ML81
	bool "Karo QSXP ML81 (i.MX8MP) SOM on QSBASE4 Board"
	select ARCH_IMX8MP
	select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
	select FIRMWARE_IMX8MP_ATF
	select ARM_SMCCC
	select MCI_IMX_ESDHC_PBL
	select IMX8M_DRAM
	select I2C_IMX_EARLY

config MACH_MNT_REFORM
	bool "MNT Reform"
	select ARCH_IMX8MQ
	select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
	select FIRMWARE_IMX8MQ_ATF
	select ARM_SMCCC
	select MCI_IMX_ESDHC_PBL
	select I2C_IMX_EARLY

config MACH_NXP_IMX8MM_EVK
	bool "NXP i.MX8MM EVK Board"
	select ARCH_IMX8MM
	select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
	select FIRMWARE_IMX8MM_ATF
	select ARM_SMCCC
	select MCI_IMX_ESDHC_PBL
	select IMX8M_DRAM
	select I2C_IMX_EARLY
	select USB_GADGET_DRIVER_ARC_PBL

config MACH_NXP_IMX8MN_EVK
	bool "NXP i.MX8MN EVK Board"
	select ARCH_IMX8MN
	select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
	select FIRMWARE_IMX_DDR4_PMU_TRAIN
	select FIRMWARE_IMX8MN_ATF
	select ARM_SMCCC
	select MCI_IMX_ESDHC_PBL
	select IMX8M_DRAM
	select I2C_IMX_EARLY

config MACH_NXP_IMX8MP_EVK
	bool "NXP i.MX8MP EVK Board"
	select ARCH_IMX8MP
	select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
	select FIRMWARE_IMX8MP_ATF
	select ARM_SMCCC
	select MCI_IMX_ESDHC_PBL
	select IMX8M_DRAM
	select I2C_IMX_EARLY

config MACH_NXP_IMX8MQ_EVK
	bool "NXP i.MX8MQ EVK Board"
	select ARCH_IMX8MQ
	select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
	select FIRMWARE_IMX8MQ_ATF
	select ARM_SMCCC
	select MCI_IMX_ESDHC_PBL

config MACH_PHYTEC_SOM_IMX8MM
	bool "Phytec i.MX8MM SOM"
	select ARCH_IMX8MM
	select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
	select FIRMWARE_IMX8MM_ATF
	select ARM_SMCCC
	select MCI_IMX_ESDHC_PBL
	select IMX8M_DRAM
	select I2C_IMX_EARLY
	select USB_GADGET_DRIVER_ARC_PBL
	select BOARD_PHYTEC_SOM_IMX8M_DETECTION
	imply AT803X_PHY

config MACH_PHYTEC_SOM_IMX8MQ
	bool "Phytec i.MX8M SOM"
	select ARCH_IMX8MQ
	select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
	select FIRMWARE_IMX8MQ_ATF
	select ARM_SMCCC
	select MCI_IMX_ESDHC_PBL

config MACH_POLYHEX_DEBIX
	bool "Polyhex DEBIX i.MX8MP Boards"
	select ARCH_IMX8MP
	select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
	select FIRMWARE_IMX8MP_ATF
	select ARM_SMCCC
	select MCI_IMX_ESDHC_PBL
	select IMX8M_DRAM
	select I2C_IMX_EARLY
	help
	  Support for DEBIX Model-A/B and SOM A + SOM A I/O board

config MACH_PROTONIC_IMX8M
	bool "Protonic-Holland i.MX8Mx based boards"
	select ARCH_IMX8MM
	select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
	select FIRMWARE_IMX8MM_ATF
	select ARM_SMCCC
	select MCI_IMX_ESDHC_PBL
	select IMX8M_DRAM
	select USB_GADGET_DRIVER_ARC_PBL

config MACH_SKOV_IMX8MP
	bool "Skov i.MX8MP based boards"
	select ARCH_IMX8MP
	select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
	select FIRMWARE_IMX8MP_ATF
	select ARM_SMCCC
	select MCI_IMX_ESDHC_PBL
	select IMX8M_DRAM
	select I2C_IMX_EARLY

config MACH_TQ_MBA8MPXL
	bool "TQ i.MX8MP Dual/Quad on MBa8MPxL Board"
	select ARCH_IMX8MP
	select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
	select FIRMWARE_IMX8MP_ATF
	select ARM_SMCCC
	select MCI_IMX_ESDHC_PBL
	select IMX8M_DRAM
	select I2C_IMX_EARLY

config MACH_VARISCITE_DT8MCUSTOMBOARD_IMX8MP
	bool "Variscite DT8MCustomBoard with DART-MX8M-PLUS"
	select ARCH_IMX8MP
	select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
	select FIRMWARE_IMX8MP_ATF
	select ARM_SMCCC
	select MCI_IMX_ESDHC_PBL
	select IMX8M_DRAM
	select I2C_IMX_EARLY

config MACH_ZII_IMX8MQ_DEV
	bool "ZII i.MX8MQ based devices"
	select ARCH_IMX8MQ
	select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
	select FIRMWARE_IMX8MQ_ATF
	select ARM_SMCCC
	select MCI_IMX_ESDHC_PBL
	select MACH_ZII_COMMON

comment "i.MX93 boards"

config MACH_TQMA93XX
	bool "TQ i.MX93 on TQMA93XX Board"
	select ARCH_IMX93
	select IMX9_DRAM
	select BOARD_TQ
	select I2C
	select I2C_IMX_LPI2C
	select FIRMWARE_IMX93_ATF
	select FIRMWARE_IMX_LPDDR4_PMU_TRAIN

endif

endmenu

# ----------------------------------------------------------

menu "i.MX specific settings"

config IMX_IIM
	tristate "IIM fusebox device"
	depends on !ARCH_IMX21
	help
	  Device driver for the IC Identification Module (IIM) fusebox. Use the
	  regular md/mw commands to program and read the fusebox.

	  Fuses are grouped in "rows", 8 bits per row. When using md/mw commands,
	  employ the -b switch and consider the region to be specifying the "Fuse
	  Row Index" rather than "Fuse Row Offset" (which is FRI * 4). You should
	  consult the documentation for your chip for more elaborate description,
	  including the eFuse map, e.g. see AN3682 for i.MX25.

config IMX_IIM_FUSE_BLOW
	bool "IIM fuses blow support"
	depends on IMX_IIM
	help
	  Enable this option to add permanent programming of the fusebox, using
	  fuses blowing.

	  Warning: blown fuses can not be unblown. Using this option may damage
	  your CPU, or make it unbootalbe. Use with care.

	  Before being actually able to blow the fuses, you need to explicitely
	  enable it:
	    imx_iim0.permanent_write_enable=1

config IMX_SAVE_BOOTROM_LOG
	bool
	default CMD_BOOTROM

config HAB
	bool

config AHAB
	bool
	select HAB

config HABV4
	tristate "HABv4 support"
	select HAB
	select NVMEM
	select IMX_OCOTP
	depends on ARCH_IMX6 || ARCH_IMX8M
	depends on OFDEVICE
	help
	  High Assurance Boot, as found on i.MX28/i.MX6/i.MX8M.

config HABV4_QSPI
	depends on HABV4
	bool "HABv4 QPSI support"
	help
	  Enable this option to build signed QSPI/FlexSPI images.

config HAB_CERTS_ENV
	depends on HAB
	bool "Specify certificates in environment"
	help
	  If this option is enabled the pathes to the HAB certificates are
	  taken from environment variables which allows for better integration
	  with build systems. With this option disabled the pathes can be
	  specified below.

	  The environment variables have the same name as the corresponding
	  Kconfig variables. For HABv3 these are:

	  CONFIG_HABV3_SRK_PEM
	  CONFIG_HABV3_CSF_CRT_DER
	  CONFIG_HABV3_IMG_CRT_DER

	  For HABv4:

	  CONFIG_HABV4_TABLE_BIN
	  CONFIG_HABV4_CSF_CRT_PEM
	  CONFIG_HABV4_IMG_CRT_PEM

config HABV4_SRK_INDEX
	depends on HABV4
	int "SRK index"
	default 0
	help
	  Select the Super Root Key used in the Command Sequence File to sign
	  the CSF binary. This should only be changed if a previous key was
	  revoked and another key needs to be used. For HABV4 the Index is in
	  the range from 0 to 3.

if HABV4 && !HAB_CERTS_ENV

config HABV4_TABLE_BIN
	string "Path to SRK table"
	default "../crts/SRK_1_2_3_4_table.bin"
	help
	  Path to the Super Root Key (SRK) table, produced by the
	  Freescale Code Signing Tool (cst).

	  This file will be inserted into the Command Sequence File
	  (CSF) when using the CSF template that comes with barebox.

config HABV4_CSF_CRT_PEM
	string "Path to CSF certificate"
	default "../crts/CSF1_1_sha256_4096_65537_v3_usr_crt.pem"
	help
	  Path to the Command Sequence File (CSF) certificate, produced by the
	  Freescale Public Key Infrastructure (PKI) script.

	  This file will be inserted into the Command Sequence File
	  (CSF) when using the CSF template that comes with barebox.

config HABV4_IMG_CRT_PEM
	string "Path to IMG certificate"
	default "../crts/IMG1_1_sha256_4096_65537_v3_usr_crt.pem"
	help
	  Path to the Image certificate, produced by the Freescale
	  Public Key Infrastructure (PKI) script.

	  This file will be inserted into the Command Sequence File
	  (CSF) when using the CSF template that comes with barebox.

endif

if HABV4

config HABV4_IMAGE_SIGNED
	bool "build signed images"
	help
	  enable the creation of a signed image, if the habv4-imx*-gencsf.h
	  file appropriate for the SoC is included in the flash-header and
	  the NXP cst Tool is available

config HABV4_IMAGE_SIGNED_USB
	bool "build signed USB images"
	depends on ARCH_IMX6
	help
	  enable the creation of a usb signed image, if the habv4-imx6-gencsf.h
	  included in the flash-header and the NXP cst Tool is available

config HABV4_IMAGE_SIGNED_ENCRYPTED
	bool "build signed encrypted images"
	help
	  enable the creation of the encrypted image, if the habv4-imx*-gencsf.h
	  file appropriate for the SoC is included in the flash-header and
	  the NXP cst Tool is available

endif

config HABV3
	tristate "HABv3 support"
	select HAB
	select IMX_IIM
	select ARCH_IMX_IMXIMAGE_SSL_SUPPORT
	depends on ARCH_IMX25
	help
	  High Assurance Boot, as found on i.MX25.

if HABV3 && !HAB_CERTS_ENV

config HABV3_SRK_PEM
	string "Path to SRK Certificate (PEM)"
	default "../crts/SRK1_sha256_2048_65537_v3_ca_x509_crt.pem"

config HABV3_CSF_CRT_DER
	string "Path to CSF certificate"
	default "../crts/CSF1_1_sha256_2048_65537_v3_ca_crt.der"

config HABV3_IMG_CRT_DER
	string "Path to IMG certificate"
	default "../crts/IMG1_1_sha256_2048_65537_v3_usr_crt.der"

endif

endmenu

endif