summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-imx/imx51.c
blob: cef302b3509fe8db81e0bbd448d380192dd29019 (plain) (blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
/*
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 */

#include <init.h>
#include <common.h>
#include <sizes.h>
#include <environment.h>
#include <io.h>
#include <mach/imx5.h>
#include <mach/imx51-regs.h>
#include <mach/revision.h>
#include <mach/clock-imx51_53.h>
#include <mach/generic.h>

#define IIM_SREV 0x24

static int imx51_silicon_revision(void)
{
	void __iomem *iim_base = IOMEM(MX51_IIM_BASE_ADDR);
	u32 rev = readl(iim_base + IIM_SREV) & 0xff;

	switch (rev) {
	case 0x0:
		return IMX_CHIP_REV_2_0;
	case 0x10:
		return IMX_CHIP_REV_3_0;
	default:
		return IMX_CHIP_REV_UNKNOWN;
	}

	return 0;
}

static void imx51_ipu_mipi_setup(void)
{
	void __iomem *hsc_addr = (void __iomem *)MX51_MIPI_HSC_BASE_ADDR;
	u32 val;

	/* setup MIPI module to legacy mode */
	writel(0xf00, hsc_addr);

	/* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */
	val = readl(hsc_addr + 0x800);
	val |= 0x30ff;
	writel(val, hsc_addr + 0x800);
}

int imx51_init(void)
{
	imx_set_silicon_revision("i.MX51", imx51_silicon_revision());
	imx51_boot_save_loc((void *)MX51_SRC_BASE_ADDR);
	add_generic_device("imx51-esdctl", 0, NULL, MX51_ESDCTL_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
	imx51_ipu_mipi_setup();

	return 0;
}

int imx51_devices_init(void)
{
	add_generic_device("imx_iim", 0, NULL, MX51_IIM_BASE_ADDR, SZ_4K,
			IORESOURCE_MEM, NULL);

	add_generic_device("imx-iomuxv3", 0, NULL, MX51_IOMUXC_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
	add_generic_device("imx51-ccm", 0, NULL, MX51_CCM_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
	add_generic_device("imx31-gpt", 0, NULL, MX51_GPT1_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
	add_generic_device("imx31-gpio", 0, NULL, MX51_GPIO1_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
	add_generic_device("imx31-gpio", 1, NULL, MX51_GPIO2_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
	add_generic_device("imx31-gpio", 2, NULL, MX51_GPIO3_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
	add_generic_device("imx31-gpio", 3, NULL, MX51_GPIO4_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
	add_generic_device("imx21-wdt", 0, NULL, MX51_WDOG_BASE_ADDR, 0x1000, IORESOURCE_MEM, NULL);
	add_generic_device("imx51-usb-misc", 0, NULL, MX51_OTG_BASE_ADDR + 0x800, 0x100, IORESOURCE_MEM, NULL);

	return 0;
}

/*
 * Saves the boot source media into the $bootsource environment variable
 *
 * This information is useful for barebox init scripts as we can then easily
 * use a kernel image stored on the same media that we launch barebox with
 * (for example).
 *
 * imx25 and imx35 can boot into barebox from several media such as
 * nand, nor, mmc/sd cards, serial roms. "mmc" is used to represent several
 * sources as its impossible to distinguish between them.
 *
 * Some sources such as serial roms can themselves have 3 different boot
 * possibilities (i2c1, i2c2 etc). It is assumed that any board will
 * only be using one of these at any one time.
 *
 * Note also that I suspect that the boot source pins are only sampled at
 * power up.
 */

#define DP_MFN_800_DIT 60 /* PL Dither mode */

/*
 * Workaround for i.MX51 PLL errata. This is needed by all boards using the
 * i.MX51 silicon version up until (including) 3.0 running at 800MHz.
 * The PLL's in the i.MX51 processor can go out of lock due to a metastable
 * condition in an analog flip-flop when used at high frequencies.
 * This workaround implements an undocumented feature in the PLL (dither
 * mode), which causes the effect of this failure to be much lower (in terms
 * of frequency deviation), avoiding system failure, or at least decreasing
 * the likelihood of system failure.
 */
static void imx51_setup_pll800_bug(void)
{
	void __iomem *base = (void *)MX51_PLL1_BASE_ADDR;
	u32 dp_config;
	volatile int i;

	imx5_setup_pll_864(base);

	dp_config = readl(base + MX5_PLL_DP_CONFIG);
	dp_config &= ~MX5_PLL_DP_CONFIG_AREN;
	writel(dp_config, base + MX5_PLL_DP_CONFIG);

	/* Restart PLL with PLM = 1 */
	writel(0x00001236, base + MX5_PLL_DP_CTL);

	/* Wait for lock */
	while (!(readl(base + MX5_PLL_DP_CTL) & 1));

	/* Modify MFN value */
	writel(DP_MFN_800_DIT, base + MX5_PLL_DP_MFN);
	writel(DP_MFN_800_DIT, base + MX5_PLL_DP_HFS_MFN);

	/* Reload MFN value */
	writel(0x1, base + MX5_PLL_DP_CONFIG);

	while (readl(base + MX5_PLL_DP_CONFIG) & 1);

	/* Wait at least 4 us */
	for (i = 0; i < 100; i++);

	/* Enable auto-restart AREN bit */
	dp_config |= MX5_PLL_DP_CONFIG_AREN;
	writel(dp_config, base + MX5_PLL_DP_CONFIG);
}

void imx51_init_lowlevel(unsigned int cpufreq_mhz)
{
	void __iomem *ccm = (void __iomem *)MX51_CCM_BASE_ADDR;
	u32 r;
	int rev = imx51_silicon_revision();

	imx5_init_lowlevel();

	/* disable write combine for TO 2 and lower revs */
	if (rev < IMX_CHIP_REV_3_0) {
		__asm__ __volatile__("mrc 15, 1, %0, c9, c0, 1":"=r"(r));
		r |= (1 << 25);
		__asm__ __volatile__("mcr 15, 1, %0, c9, c0, 1" : : "r"(r));
	}

	/* Gate of clocks to the peripherals first */
	writel(0x3fffffff, ccm + MX5_CCM_CCGR0);
	writel(0x00000000, ccm + MX5_CCM_CCGR1);
	writel(0x00000000, ccm + MX5_CCM_CCGR2);
	writel(0x00000000, ccm + MX5_CCM_CCGR3);
	writel(0x00030000, ccm + MX5_CCM_CCGR4);
	writel(0x00fff030, ccm + MX5_CCM_CCGR5);
	writel(0x00000300, ccm + MX5_CCM_CCGR6);

	/* Disable IPU and HSC dividers */
	writel(0x00060000, ccm + MX5_CCM_CCDR);

	/* Make sure to switch the DDR away from PLL 1 */
	writel(0x19239145, ccm + MX5_CCM_CBCDR);
	/* make sure divider effective */
	while (readl(ccm + MX5_CCM_CDHIPR));

	/* Switch ARM to step clock */
	writel(0x4, ccm + MX5_CCM_CCSR);

	switch (cpufreq_mhz) {
	case 600:
		imx5_setup_pll_600((void __iomem *)MX51_PLL1_BASE_ADDR);
		break;
	default:
		/* Default maximum 800MHz */
		if (rev <= IMX_CHIP_REV_3_0)
			imx51_setup_pll800_bug();
		else
			imx5_setup_pll_800((void __iomem *)MX51_PLL1_BASE_ADDR);
		break;
	}

	imx5_setup_pll_665((void __iomem *)MX51_PLL3_BASE_ADDR);

	/* Switch peripheral to PLL 3 */
	writel(0x000010C0, ccm + MX5_CCM_CBCMR);
	writel(0x13239145, ccm + MX5_CCM_CBCDR);

	imx5_setup_pll_665((void __iomem *)MX51_PLL2_BASE_ADDR);

	/* Switch peripheral to PLL2 */
	writel(0x19239145, ccm + MX5_CCM_CBCDR);
	writel(0x000020C0, ccm + MX5_CCM_CBCMR);

	imx5_setup_pll_216((void __iomem *)MX51_PLL3_BASE_ADDR);

	/* Set the platform clock dividers */
	writel(0x00000125, MX51_ARM_BASE_ADDR + 0x14);

	/* Run at Full speed */
	writel(0x0, ccm + MX5_CCM_CACRR);

	/* Switch ARM back to PLL 1 */
	writel(0x0, ccm + MX5_CCM_CCSR);

	/* setup the rest */
	/* Use lp_apm (24MHz) source for perclk */
	writel(0x000020C2, ccm + MX5_CCM_CBCMR);
	/* ddr clock from PLL 1, all perclk dividers are 1 since using 24MHz */
	writel(0x59239100, ccm + MX5_CCM_CBCDR);

	/* Restore the default values in the Gate registers */
	writel(0xffffffff, ccm + MX5_CCM_CCGR0);
	writel(0xffffffff, ccm + MX5_CCM_CCGR1);
	writel(0xffffffff, ccm + MX5_CCM_CCGR2);
	writel(0xffffffff, ccm + MX5_CCM_CCGR3);
	writel(0xffffffff, ccm + MX5_CCM_CCGR4);
	writel(0xffffffff, ccm + MX5_CCM_CCGR5);
	writel(0xffffffff, ccm + MX5_CCM_CCGR6);

	/* Use PLL 2 for UART's, get 66.5MHz from it */
	writel(0xA591A020, ccm + MX5_CCM_CSCMR1);
	writel(0x00C30321, ccm + MX5_CCM_CSCDR1);

	/* make sure divider effective */
	while (readl(ccm + MX5_CCM_CDHIPR));

	writel(0x0, ccm + MX5_CCM_CCDR);
}