1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
|
/*
* Copyright (C) 2007 Sascha Hauer, Pengutronix
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#include <common.h>
#include <net.h>
#include <cfi_flash.h>
#include <init.h>
#include <environment.h>
#include <fec.h>
#include <asm/armlinux.h>
#include <asm/mach-types.h>
#include <partition.h>
#include <fs.h>
#include <fcntl.h>
#include <asm/io.h>
#include <asm/hardware.h>
#include <nand.h>
#include <linux/mtd/nand.h>
#include <asm/arch/ether.h>
#include <asm/arch/atmel_nand.h>
#include <gpio.h>
#define NAND_READY_GPIO (32 * 2 + 13) /* Port C pin 13 */
#define NAND_ENABLE_GPIO (32 * 2 + 14) /* Port C pin 14 */
static struct atmel_nand_data nand_pdata = {
.ale = 21,
.cle = 22,
/* .det_pin = ... not connected */
.ecc_base = (void __iomem *)AT91C_BASE_HECC,
.ecc_mode = NAND_ECC_HW,
.rdy_pin = NAND_READY_GPIO,
.enable_pin = NAND_ENABLE_GPIO,
#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
.bus_width_16 = 1,
#else
.bus_width_16 = 0,
#endif
};
static struct device_d nand_dev = {
.name = "atmel_nand",
.map_base = 0x40000000,
.size = 0x10,
.platform_data = &nand_pdata,
};
static struct device_d sdram_dev = {
.name = "ram",
.id = "ram0",
.map_base = 0x20000000,
.size = 64 * 1024 * 1024,
.type = DEVICE_TYPE_DRAM,
};
static struct at91sam_ether_platform_data macb_pdata = {
.flags = AT91SAM_ETHER_RMII,
.phy_addr = 0,
};
static struct device_d macb_dev = {
.name = "macb",
.id = "eth0",
.map_base = AT91C_BASE_EMACB,
.size = 0x1000,
.type = DEVICE_TYPE_ETHER,
.platform_data = &macb_pdata,
};
static int at91sam9260ek_devices_init(void)
{
struct device_d *nand, *dev;
register_device(&sdram_dev);
gpio_direction_input(NAND_READY_GPIO);
gpio_direction_output(NAND_ENABLE_GPIO, 1);
register_device(&nand_dev);
register_device(&macb_dev);
armlinux_set_bootparams((void *)0x20000100);
armlinux_set_architecture(MACH_TYPE_AT91SAM9260EK);
nand = get_device_by_path("/dev/nand0");
dev = dev_add_partition(nand, 0x00000, 0x80000, PARTITION_FIXED, "self_raw");
dev_add_bb_dev(dev, "self0");
dev = dev_add_partition(nand, 0x40000, 0x40000, PARTITION_FIXED, "env_raw");
dev_add_bb_dev(dev, "env0");
dev_add_partition(nand, 0x00000, 0x80000, PARTITION_FIXED, "self");
dev_add_partition(nand, 0x40000, 0x40000, PARTITION_FIXED, "env");
return 0;
}
device_initcall(at91sam9260ek_devices_init);
static struct device_d at91sam9260ek_serial_device = {
.name = "atmel_serial",
.id = "cs0",
.map_base = AT91C_BASE_DBGU,
.size = 4096,
.type = DEVICE_TYPE_CONSOLE,
};
static int at91sam9260ek_console_init(void)
{
register_device(&at91sam9260ek_serial_device);
return 0;
}
console_initcall(at91sam9260ek_console_init);
|
