1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
|
/*
*
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <asm/arch/imx-regs.h>
#include <asm/arch/imx-pll.h>
#include <asm/arch/esdctl.h>
#include <asm/cache-l2x0.h>
#define writel(val, reg) \
ldr r0, =reg; \
ldr r1, =val; \
str r1, [r0];
#define writeb(val, reg) \
ldr r0, =reg; \
ldr r1, =val; \
strb r1, [r0];
/* Assuming 24MHz input clock */
#define MPCTL_PARAM_399 (IMX_PLL_PD(0) | IMX_PLL_MFD(15) | IMX_PLL_MFI(8) | IMX_PLL_MFN(5))
#define MPCTL_PARAM_532 ((1 << 31) | IMX_PLL_PD(0) | IMX_PLL_MFD(11) | IMX_PLL_MFI(11) | IMX_PLL_MFN(1))
#define PPCTL_PARAM_300 (IMX_PLL_PD(0) | IMX_PLL_MFD(3) | IMX_PLL_MFI(6) | IMX_PLL_MFN(1))
ARM_PPMRR: .word 0x40000015
L2CACHE_PARAM: .word 0x00030024
CCM_CCMR_W: .word 0x003F4208
CCM_PDR0_W: .word 0x00001000
MPCTL_PARAM_399_W: .word MPCTL_PARAM_399
MPCTL_PARAM_532_W: .word MPCTL_PARAM_532
PPCTL_PARAM_W: .word PPCTL_PARAM_300
CCM_BASE_ADDR_W: .word IMX_CCM_BASE
.globl board_init_lowlevel
board_init_lowlevel:
mov r10, lr
mrc 15, 0, r1, c1, c0, 0
mrc 15, 0, r0, c1, c0, 1
orr r0, r0, #7
mcr 15, 0, r0, c1, c0, 1
orr r1, r1, #(1<<11) /* Flow prediction (Z) */
orr r1, r1, #(1<<22) /* unaligned accesses */
orr r1, r1, #(1<<21) /* Low Int Latency */
mcr 15, 0, r1, c1, c0, 0
mov r0, #0
mcr 15, 0, r0, c15, c2, 4
/*
* Branch predicition is now enabled. Flush the BTAC to ensure a valid
* starting point. Don't flush BTAC while it is disabled to avoid
* ARM1136 erratum 408023.
*/
mov r0, #0
mcr p15, 0, r0, c7, c5, 6 /* flush entire BTAC */
mov r0, #0
mcr 15, 0, r0, c7, c7, 0 /* invalidate I cache and D cache */
mcr 15, 0, r0, c8, c7, 0 /* invalidate TLBs */
mcr 15, 0, r0, c7, c10, 4 /* Drain the write buffer */
/* Also setup the Peripheral Port Remap register inside the core */
ldr r0, ARM_PPMRR /* start from AIPS 2GB region */
mcr p15, 0, r0, c15, c2, 4
/*
* End of ARM1136 init
*/
ldr r0, CCM_BASE_ADDR_W
ldr r2, CCM_CCMR_W
str r2, [r0, #CCM_CCMR]
ldr r3, MPCTL_PARAM_399_W /* consumer path*/
/*Set MPLL , arm clock and ahb clock*/
str r3, [r0, #CCM_MPCTL]
ldr r1, PPCTL_PARAM_W
str r1, [r0, #CCM_PPCTL]
ldr r1, CCM_PDR0_W
str r1, [r0, #CCM_PDR0]
ldr r1, [r0, #CCM_CGR0]
orr r1, r1, #0x00300000
str r1, [r0, #CCM_CGR0]
ldr r1, [r0, #CCM_CGR1]
orr r1, r1, #0x00000C00
orr r1, r1, #0x00000003
str r1, [r0, #CCM_CGR1]
/* Skip SDRAM initialization if we run from RAM */
cmp pc, #0x80000000
bls 1f
cmp pc, #0x90000000
bhi 1f
mov pc, r10
1:
/* MDDR init, enable mDDR*/
writel(0x00000304, ESDMISC) /* was 0x00000004 */
/* set timing paramters */
writel(0x007ffc2f, ESDCFG0) /* was 0x007ffc3f */
/* select Prechare-All mode */
writel(0x92220000, ESDCTL0)
/* Prechare-All */
writel(0x12345678, IMX_SDRAM_CS0 + 0x400)
/* select Load-Mode-Register mode */
writel(0xB8001000, ESDCTL0)
/* Load reg EMR2 */
writeb(0xda, 0x84000000)
/* Load reg EMR3 */
writeb(0xda, 0x86000000)
/* Load reg EMR1 -- enable DLL */
writeb(0xda, 0x82000400)
/* Load reg MR -- reset DLL */
writeb(0xda, 0x80000333)
/* select Prechare-All mode */
writel(0x92220000, ESDCTL0)
/* Prechare-All */
writel(0x12345678, IMX_SDRAM_CS0 + 0x400)
/* select Manual-Refresh mode */
writel(0xA2220000, ESDCTL0)
/* Manual-Refresh 2 times */
writel(0x87654321, IMX_SDRAM_CS0)
writel(0x87654321, IMX_SDRAM_CS0)
/* select Load-Mode-Register mode */
writel(0xB2220000, ESDCTL0)
/* Load reg MR -- CL3, BL8, end DLL reset */
writeb(0xda, 0x80000233)
/* Load reg EMR1 -- OCD default */
writeb(0xda, 0x82000780)
/* Load reg EMR1 -- OCD exit */
writeb(0xda, 0x82000400)
/* select normal-operation mode
* DSIZ32-bit, BL8, COL10-bit, ROW13-bit
* disable PWT & PRCT
* disable Auto-Refresh */
writel(0x82220080, ESDCTL0)
/* enable Auto-Refresh */
writel(0x82228080, ESDCTL0)
/* enable Auto-Refresh */
writel(0x00002000, ESDCTL1)
mov r0, #IMX_L2CC_BASE
ldr r1, [r0, #L2X0_AUX_CTRL]
orr r1, r1, #0x1000
str r1, [r0, #L2X0_AUX_CTRL]
mov pc, lr
|