summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/nand_s3c24xx.c
blob: e20517ab4a8e2c129f8088ecf7cc921f5eb396a1 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
/* linux/drivers/mtd/nand/s3c2410.c
 *
 * Copyright (C) 2009 Juergen Beisert, Pengutronix
 *
 * Copyright © 2004-2008 Simtec Electronics
 *	http://armlinux.simtec.co.uk/
 *	Ben Dooks <ben@simtec.co.uk>
 *
 * Samsung S3C2410 NAND driver
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
*/

#include <config.h>
#include <common.h>
#include <driver.h>
#include <malloc.h>
#include <init.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <mach/s3c-generic.h>
#include <mach/s3c-iomap.h>
#include <mach/s3c24xx-nand.h>
#include <io.h>
#include <asm-generic/errno.h>
#include <asm/sections.h>

#ifdef CONFIG_S3C_NAND_BOOT
# define __nand_boot_init __bare_init
# ifndef BOARD_DEFAULT_NAND_TIMING
#  define BOARD_DEFAULT_NAND_TIMING 0x0737
# endif
#else
# define __nand_boot_init
#endif

/**
 * Define this symbol for testing purpose. It will add a command to read an
 * image from the NAND like it the boot strap code will do.
 */
#define CONFIG_NAND_S3C_BOOT_DEBUG

/* NAND controller's register */

#define NFCONF 0x00

#ifdef CONFIG_CPU_S3C2410

#define NFCMD 0x04
#define NFADDR 0x08
#define NFDATA 0x0c
#define NFSTAT 0x10
#define NFECC 0x14

/* S3C2410 specific bits */
#define NFSTAT_BUSY (1)
#define NFCONF_nFCE (1 << 11)
#define NFCONF_INITECC (1 << 12)
#define NFCONF_EN (1 << 15)

#endif	/* CONFIG_CPU_S3C2410 */

#ifdef CONFIG_CPU_S3C2440

#define NFCONT 0x04
#define NFCMD 0x08
#define NFADDR 0x0C
#define NFDATA 0x10
#define NFSTAT 0x20
#define NFECC 0x2C

/* S3C2440 specific bits */
#define NFSTAT_BUSY (1)
#define NFCONT_nFCE (1 << 1)
#define NFCONT_INITECC (1 << 4)
#define NFCONT_EN (1)

#endif	/* CONFIG_CPU_S3C2440 */


struct s3c24x0_nand_host {
	struct nand_chip	nand;
	struct mtd_partition	*parts;
	struct device_d		*dev;

	void __iomem		*base;
};

/**
 * oob placement block for use with hardware ecc generation on small page
 */
static struct nand_ecclayout nand_hw_eccoob = {
	.eccbytes = 3,
	.eccpos = { 0, 1, 2},
	.oobfree = {
		{
			.offset = 8,
			.length = 8
		}
	}
};

/* - Functions shared between the boot strap code and the regular driver - */

/**
 * Issue the specified command to the NAND device
 * @param[in] host Base address of the NAND controller
 * @param[in] cmd Command for NAND flash
 */
static void __nand_boot_init send_cmd(void __iomem *host, uint8_t cmd)
{
	writeb(cmd, host + NFCMD);
}

/**
 * Issue the specified address to the NAND device
 * @param[in] host Base address of the NAND controller
 * @param[in] addr Address for the NAND flash
 */
static void __nand_boot_init send_addr(void __iomem *host, uint8_t addr)
{
	writeb(addr, host + NFADDR);
}

/**
 * Enable the NAND flash access
 * @param[in] host Base address of the NAND controller
 */
static void __nand_boot_init enable_cs(void __iomem *host)
{
#ifdef CONFIG_CPU_S3C2410
	writew(readw(host + NFCONF) & ~NFCONF_nFCE, host + NFCONF);
#endif
#ifdef CONFIG_CPU_S3C2440
	writew(readw(host + NFCONT) & ~NFCONT_nFCE, host + NFCONT);
#endif
}

/**
 * Disable the NAND flash access
 * @param[in] host Base address of the NAND controller
 */
static void __nand_boot_init disable_cs(void __iomem *host)
{
#ifdef CONFIG_CPU_S3C2410
	writew(readw(host + NFCONF) | NFCONF_nFCE, host + NFCONF);
#endif
#ifdef CONFIG_CPU_S3C2440
	writew(readw(host + NFCONT) | NFCONT_nFCE, host + NFCONT);
#endif
}

/**
 * Enable the NAND flash controller
 * @param[in] host Base address of the NAND controller
 * @param[in] timing Timing to access the NAND memory
 */
static void __nand_boot_init enable_nand_controller(void __iomem *host, uint32_t timing)
{
#ifdef CONFIG_CPU_S3C2410
	writew(timing + NFCONF_EN + NFCONF_nFCE, host + NFCONF);
#endif
#ifdef CONFIG_CPU_S3C2440
	writew(NFCONT_EN + NFCONT_nFCE, host + NFCONT);
	writew(timing, host + NFCONF);
#endif
}

/**
 * Diable the NAND flash controller
 * @param[in] host Base address of the NAND controller
 */
static void __nand_boot_init disable_nand_controller(void __iomem *host)
{
#ifdef CONFIG_CPU_S3C2410
	writew(NFCONF_nFCE, host + NFCONF);
#endif
#ifdef CONFIG_CPU_S3C2440
	writew(NFCONT_nFCE, host + NFCONT);
#endif
}

/* ----------------------------------------------------------------------- */

#ifdef CONFIG_CPU_S3C2440
/**
 * Read one block of data from the NAND port
 * @param[in] mtd Instance data
 * @param[out] buf buffer to write data to
 * @param[in] len byte count
 *
 * This is a special block read variant for the S3C2440 CPU.
 */
static void s3c2440_nand_read_buf(struct nand_chip *chip, uint8_t *buf, int len)
{
	struct s3c24x0_nand_host *host = chip->priv;

	readsl(host->base + NFDATA, buf, len >> 2);

	/* cleanup any fractional read */
	if (len & 3) {
		buf += len & ~3;

		for (; len & 3; len--)
			*buf++ = readb(host->base + NFDATA);
	}
}

/**
 * Write one block of data to the NAND port
 * @param[in] mtd Instance data
 * @param[out] buf buffer to read data from
 * @param[in] len byte count
 *
 * This is a special block write variant for the S3C2440 CPU.
 */
static void s3c2440_nand_write_buf(struct nand_chip *chip, const uint8_t *buf,
					int len)
{
	struct s3c24x0_nand_host *host = chip->priv;

	writesl(host->base + NFDATA, buf, len >> 2);

	/* cleanup any fractional write */
	if (len & 3) {
		buf += len & ~3;

		for (; len & 3; len--, buf++)
			writeb(*buf, host->base + NFDATA);
	}
}
#endif

/**
 * Check the ECC and try to repair the data if possible
 * @param[in] mtd_info Not used
 * @param[inout] dat Pointer to the data buffer that might contain a bit error
 * @param[in] read_ecc ECC data from the OOB space
 * @param[in] calc_ecc ECC data calculated from the data
 * @return 0 no error, 1 repaired error, -1 no way...
 *
 * @note: This routine works always on a 24 bit ECC
 */
static int s3c2410_nand_correct_data(struct nand_chip *chip, uint8_t *dat,
				uint8_t *read_ecc, uint8_t *calc_ecc)
{
	unsigned int diff0, diff1, diff2;
	unsigned int bit, byte;

	diff0 = read_ecc[0] ^ calc_ecc[0];
	diff1 = read_ecc[1] ^ calc_ecc[1];
	diff2 = read_ecc[2] ^ calc_ecc[2];

	if (diff0 == 0 && diff1 == 0 && diff2 == 0)
		return 0;		/* ECC is ok */

	/* sometimes people do not think about using the ECC, so check
	 * to see if we have an 0xff,0xff,0xff read ECC and then ignore
	 * the error, on the assumption that this is an un-eccd page.
	 */
	if (read_ecc[0] == 0xff && read_ecc[1] == 0xff && read_ecc[2] == 0xff)
		return 0;

	/* Can we correct this ECC (ie, one row and column change).
	 * Note, this is similar to the 256 error code on smartmedia */

	if (((diff0 ^ (diff0 >> 1)) & 0x55) == 0x55 &&
	    ((diff1 ^ (diff1 >> 1)) & 0x55) == 0x55 &&
	    ((diff2 ^ (diff2 >> 1)) & 0x55) == 0x55) {
		/* calculate the bit position of the error */

		bit  = ((diff2 >> 3) & 1) |
		       ((diff2 >> 4) & 2) |
		       ((diff2 >> 5) & 4);

		/* calculate the byte position of the error */

		byte = ((diff2 << 7) & 0x100) |
		       ((diff1 << 0) & 0x80)  |
		       ((diff1 << 1) & 0x40)  |
		       ((diff1 << 2) & 0x20)  |
		       ((diff1 << 3) & 0x10)  |
		       ((diff0 >> 4) & 0x08)  |
		       ((diff0 >> 3) & 0x04)  |
		       ((diff0 >> 2) & 0x02)  |
		       ((diff0 >> 1) & 0x01);

		dat[byte] ^= (1 << bit);
		return 1;
	}

	/* if there is only one bit difference in the ECC, then
	 * one of only a row or column parity has changed, which
	 * means the error is most probably in the ECC itself */

	diff0 |= (diff1 << 8);
	diff0 |= (diff2 << 16);

	if ((diff0 & ~(1<<fls(diff0))) == 0)
		return 1;

	return -1;
}

static void s3c2410_nand_enable_hwecc(struct nand_chip *chip, int mode)
{
	struct s3c24x0_nand_host *host = chip->priv;

#ifdef CONFIG_CPU_S3C2410
	writel(readl(host->base + NFCONF) | NFCONF_INITECC , host->base + NFCONF);
#endif
#ifdef CONFIG_CPU_S3C2440
	writel(readl(host->base + NFCONT) | NFCONT_INITECC , host->base + NFCONT);
#endif
}

static int s3c2410_nand_calculate_ecc(struct nand_chip *chip, const uint8_t *dat, uint8_t *ecc_code)
{
	struct s3c24x0_nand_host *host = chip->priv;

#ifdef CONFIG_CPU_S3C2410
	ecc_code[0] = readb(host->base + NFECC);
	ecc_code[1] = readb(host->base + NFECC + 1);
	ecc_code[2] = readb(host->base + NFECC + 2);
#endif
#ifdef CONFIG_CPU_S3C2440
	unsigned long ecc = readl(host->base + NFECC);

	ecc_code[0] = ecc;
	ecc_code[1] = ecc >> 8;
	ecc_code[2] = ecc >> 16;
#endif
	return 0;
}

static void s3c24x0_nand_select_chip(struct nand_chip *chip, int num)
{
	struct s3c24x0_nand_host *host = chip->priv;

	if (num == -1)
		disable_cs(host->base);
	else
		enable_cs(host->base);
}

static int s3c24x0_nand_devready(struct nand_chip *chip)
{
	struct s3c24x0_nand_host *host = chip->priv;

	return readw(host->base + NFSTAT) & NFSTAT_BUSY;
}

static void s3c24x0_nand_hwcontrol(struct nand_chip *chip, int cmd,
					unsigned int ctrl)
{
	struct s3c24x0_nand_host *host = chip->priv;

	if (cmd == NAND_CMD_NONE)
		return;
	/*
	* If the CLE should be active, this call is a NAND command
	*/
	if (ctrl & NAND_CLE)
		send_cmd(host->base, cmd);
	/*
	* If the ALE should be active, this call is a NAND address
	*/
	if (ctrl & NAND_ALE)
		send_addr(host->base, cmd);
}

static int s3c24x0_nand_inithw(struct s3c24x0_nand_host *host)
{
	struct s3c24x0_nand_platform_data *pdata = host->dev->platform_data;
	uint32_t tmp;

	/* reset the NAND controller */
	disable_nand_controller(host->base);

	if (pdata != NULL)
		tmp = pdata->nand_timing;
	else
		/* else slowest possible timing */
		tmp = CALC_NFCONF_TIMING(4, 8, 8);

	/* reenable the NAND controller */
	enable_nand_controller(host->base, tmp);

	return 0;
}

static int s3c24x0_nand_probe(struct device_d *dev)
{
	struct resource *iores;
	struct nand_chip *chip;
	struct s3c24x0_nand_platform_data *pdata = dev->platform_data;
	struct mtd_info *mtd;
	struct s3c24x0_nand_host *host;
	int ret;

	/* Allocate memory for MTD device structure and private data */
	host = kzalloc(sizeof(struct s3c24x0_nand_host), GFP_KERNEL);
	if (!host)
		return -ENOMEM;

	host->dev = dev;
	iores = dev_request_mem_resource(dev, 0);
	if (IS_ERR(iores))
		return PTR_ERR(iores);
	host->base = IOMEM(iores->start);

	/* structures must be linked */
	chip = &host->nand;
	mtd = &chip->mtd;
	mtd->dev.parent = dev;

	/* init the default settings */

	/* 50 us command delay time */
	chip->legacy.chip_delay = 50;
	chip->priv = host;

	chip->legacy.IO_ADDR_R = chip->legacy.IO_ADDR_W = host->base + NFDATA;

#ifdef CONFIG_CPU_S3C2440
	chip->legacy.read_buf = s3c2440_nand_read_buf;
	chip->legacy.write_buf = s3c2440_nand_write_buf;
#endif
	chip->legacy.cmd_ctrl = s3c24x0_nand_hwcontrol;
	chip->legacy.dev_ready = s3c24x0_nand_devready;
	chip->legacy.select_chip = s3c24x0_nand_select_chip;

	/* we are using the hardware ECC feature of this device */
	chip->ecc.calculate = s3c2410_nand_calculate_ecc;
	chip->ecc.correct = s3c2410_nand_correct_data;
	chip->ecc.hwctl = s3c2410_nand_enable_hwecc;

	/*
	 * Setup ECC handling in accordance to the kernel
	 * - 1 times 512 bytes with 24 bit ECC for small page
	 * - 8 times 256 bytes with 24 bit ECC each for large page
	 */
	chip->ecc.mode = NAND_ECC_HW;
	chip->ecc.bytes = 3;	/* always 24 bit ECC per turn */
	chip->ecc.strength  = 1;

#ifdef CONFIG_CPU_S3C2440
	if (readl(host->base) & 0x8) {
		/* large page (2048 bytes per page) */
		chip->ecc.size = 256;
	} else
#endif
	{
		/* small page (512 bytes per page) */
		chip->ecc.size = 512;
		chip->ecc.layout = &nand_hw_eccoob;
	}

	if (pdata->flash_bbt) {
		/* use a flash based bbt */
		chip->bbt_options |= NAND_BBT_USE_FLASH;
	}

	ret = s3c24x0_nand_inithw(host);
	if (ret != 0)
		goto on_error;

	/* Scan to find existence of the device */
	ret = nand_scan(chip, 1);
	if (ret != 0) {
		ret = -ENXIO;
		goto on_error;
	}

	return add_mtd_nand_device(chip, "nand");

on_error:
	free(host);
	return ret;
}

static struct driver_d s3c24x0_nand_driver = {
	.name  = "s3c24x0_nand",
	.probe = s3c24x0_nand_probe,
};
device_platform_driver(s3c24x0_nand_driver);

#ifdef CONFIG_S3C_NAND_BOOT

static void __nand_boot_init wait_for_completion(void __iomem *host)
{
	while (!(readw(host + NFSTAT) & NFSTAT_BUSY))
		;
}

/**
 * Convert a page offset into a page address for the NAND
 * @param host Where to write the address to
 * @param offs Page's offset in the NAND
 * @param ps Page size (512 or 2048)
 * @param c Address cycle count (3, 4 or 5)
 *
 * Uses the offset of the page to generate an page address into the NAND. This
 * differs when using a 512 byte or 2048 bytes per page NAND.
 * The column part of the page address to be generated is always forced to '0'.
 */
static void __nand_boot_init nfc_addr(void __iomem *host, uint32_t offs,
					int ps, int c)
{
	send_addr(host, 0); /* column part 1 */

	if (ps == 512) {
		send_addr(host, offs >> 9);
		send_addr(host, offs >> 17);
		if (c > 3)
			send_addr(host, offs >> 25);
	} else {
		send_addr(host, 0); /* column part 2 */
		send_addr(host, offs >> 11);
		send_addr(host, offs >> 19);
		if (c > 4)
			send_addr(host, offs >> 27);
		send_cmd(host, NAND_CMD_READSTART);
	}
}

/**
 * Load a sequential count of pages from the NAND into memory
 * @param[out] dest Pointer to target area (in SDRAM)
 * @param[in] size Bytes to read from NAND device
 * @param[in] page Start page to read from
 *
 * This function must be located in the first 4kiB of the barebox image
 * (guess why).
 */
void __nand_boot_init s3c24x0_nand_load_image(void *dest, int size, int page)
{
	void __iomem *host = (void __iomem *)S3C24X0_NAND_BASE;
	unsigned pagesize;
	int i, cycle;

	/*
	 * Reenable the NFC and use the default (but slow) access
	 * timing or the board specific setting if provided.
	 */
	enable_nand_controller(host, BOARD_DEFAULT_NAND_TIMING);

	/* use the current NAND hardware configuration */
	switch (readl(S3C24X0_NAND_BASE) & 0xf) {
	case 0x6:	/* 8 bit, 4 addr cycles, 512 bpp, normal NAND */
		pagesize = 512;
		cycle = 4;
		break;
	case 0xc:	/* 8 bit, 4 addr cycles, 2048 bpp, advanced NAND */
		pagesize = 2048;
		cycle = 4;
		break;
	case 0xe:	/* 8 bit, 5 addr cycles, 2048 bpp, advanced NAND */
		pagesize = 2048;
		cycle = 5;
		break;
	default:
		/* we cannot output an error message here :-( */
		disable_nand_controller(host);
		return;
	}

	enable_cs(host);

	/* Reset the NAND device */
	send_cmd(host, NAND_CMD_RESET);
	wait_for_completion(host);
	disable_cs(host);

	do {
		enable_cs(host);
		send_cmd(host, NAND_CMD_READ0);
		nfc_addr(host, page * pagesize, pagesize, cycle);
		wait_for_completion(host);
		/* copy one page (do *not* use readsb() here!)*/
		for (i = 0; i < pagesize; i++)
			writeb(readb(host + NFDATA), (void __iomem *)(dest + i));
		disable_cs(host);

		page++;
		dest += pagesize;
		size -= pagesize;
	} while (size >= 0);

	/* disable the controller again */
	disable_nand_controller(host);
}

#include <asm/sections.h>

void __nand_boot_init nand_boot(void)
{
	void *dest = _text;
	int size = barebox_image_size;
	int page = 0;

	s3c24x0_nand_load_image(dest, size, page);
}
#ifdef CONFIG_NAND_S3C_BOOT_DEBUG
#include <command.h>

static int do_nand_boot_test(int argc, char *argv[])
{
	void *dest;
	int size;

	if (argc < 3)
		return COMMAND_ERROR_USAGE;

	dest = (void *)strtoul_suffix(argv[1], NULL, 0);
	size = strtoul_suffix(argv[2], NULL, 0);

	s3c24x0_nand_load_image(dest, size, 0);

	/* re-enable the controller again, as this was a test only */
	enable_nand_controller((void *)S3C24X0_NAND_BASE,
				BOARD_DEFAULT_NAND_TIMING);

	return 0;
}

BAREBOX_CMD_START(nand_boot_test)
	.cmd		= do_nand_boot_test,
	BAREBOX_CMD_DESC("load an image from NAND")
	BAREBOX_CMD_OPTS("DEST SIZE")
	BAREBOX_CMD_GROUP(CMD_GRP_BOOT)
BAREBOX_CMD_END
#endif

#endif /* CONFIG_S3C_NAND_BOOT */

/**
 * @file
 * @brief Support for various kinds of NAND devices
 *
 * ECC handling in this driver (in accordance to the current 2.6.38 kernel):
 * - for small page NANDs it generates 3 ECC bytes out of 512 data bytes
 * - for large page NANDs it generates 24 ECC bytes out of 2048 data bytes
 *
 * As small page NANDs are using 48 bits ECC per default, this driver uses a
 * local OOB layout description, to shrink it down to 24 bits. This is a bad
 * idea, but we cannot change it here, as the kernel is using this layout.
 *
 * For large page NANDs this driver uses the default layout, as the kernel does.
 */