1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
|
# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/connector/usb-connector.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: USB Connector
maintainers:
- Rob Herring <robh@kernel.org>
description:
A USB connector node represents a physical USB connector. It should be a child
of a USB interface controller.
properties:
compatible:
enum:
- usb-a-connector
- usb-b-connector
- usb-c-connector
label:
description: Symbolic name for the connector.
type:
description: Size of the connector, should be specified in case of
non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible
connectors.
allOf:
- $ref: /schemas/types.yaml#definitions/string
enum:
- mini
- micro
self-powered:
description: Set this property if the USB device has its own power source.
type: boolean
# The following are optional properties for "usb-b-connector".
id-gpios:
description: An input gpio for USB ID pin.
maxItems: 1
vbus-gpios:
description: An input gpio for USB VBus pin, used to detect presence of
VBUS 5V.
maxItems: 1
vbus-supply:
description: A phandle to the regulator for USB VBUS if needed when host
mode or dual role mode is supported.
Particularly, if use an output GPIO to control a VBUS regulator, should
model it as a regulator. See bindings/regulator/fixed-regulator.yaml
# The following are optional properties for "usb-c-connector".
power-role:
description: Determines the power role that the Type C connector will
support. "dual" refers to Dual Role Port (DRP).
allOf:
- $ref: /schemas/types.yaml#definitions/string
enum:
- source
- sink
- dual
try-power-role:
description: Preferred power role.
allOf:
- $ref: /schemas/types.yaml#definitions/string
enum:
- source
- sink
- dual
data-role:
description: Data role if Type C connector supports USB data. "dual" refers
Dual Role Device (DRD).
allOf:
- $ref: /schemas/types.yaml#definitions/string
enum:
- host
- device
- dual
# The following are optional properties for "usb-c-connector" with power
# delivery support.
source-pdos:
description: An array of u32 with each entry providing supported power
source data object(PDO), the detailed bit definitions of PDO can be found
in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
Source_Capabilities Message, the order of each entry(PDO) should follow
the PD spec chapter 6.4.1. Required for power source and power dual role.
User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
defined in dt-bindings/usb/pd.h.
minItems: 1
maxItems: 7
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
sink-pdos:
description: An array of u32 with each entry providing supported power sink
data object(PDO), the detailed bit definitions of PDO can be found in
"Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
Sink Capabilities Message, the order of each entry(PDO) should follow the
PD spec chapter 6.4.1. Required for power sink and power dual role. User
can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
in dt-bindings/usb/pd.h.
minItems: 1
maxItems: 7
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
op-sink-microwatt:
description: Sink required operating power in microwatt, if source can't
offer the power, Capability Mismatch is set. Required for power sink and
power dual role.
ports:
description: OF graph bindings (specified in bindings/graph.txt) that model
any data bus to the connector unless the bus is between parent node and
the connector. Since a single connector can have multiple data buses every
bus has an assigned OF graph port number as described below.
type: object
properties:
port@0:
type: object
description: High Speed (HS), present in all connectors.
port@1:
type: object
description: Super Speed (SS), present in SS capable connectors.
port@2:
type: object
description: Sideband Use (SBU), present in USB-C. This describes the
alternate mode connection of which SBU is a part.
required:
- port@0
required:
- compatible
examples:
# Micro-USB connector with HS lines routed via controller (MUIC).
- |+
muic-max77843 {
usb_con1: connector {
compatible = "usb-b-connector";
label = "micro-USB";
type = "micro";
};
};
# USB-C connector attached to CC controller (s2mm005), HS lines routed
# to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
# DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
- |+
ccic: s2mm005 {
usb_con2: connector {
compatible = "usb-c-connector";
label = "USB-C";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
usb_con_hs: endpoint {
remote-endpoint = <&max77865_usbc_hs>;
};
};
port@1 {
reg = <1>;
usb_con_ss: endpoint {
remote-endpoint = <&usbdrd_phy_ss>;
};
};
port@2 {
reg = <2>;
usb_con_sbu: endpoint {
remote-endpoint = <&dp_aux>;
};
};
};
};
};
# USB-C connector attached to a typec port controller(ptn5110), which has
# power delivery support and enables drp.
- |+
#include <dt-bindings/usb/pd.h>
typec: ptn5110 {
usb_con3: connector {
compatible = "usb-c-connector";
label = "USB-C";
power-role = "dual";
try-power-role = "sink";
source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
PDO_VAR(5000, 12000, 2000)>;
op-sink-microwatt = <10000000>;
};
};
|
