1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
|
Rockchip specific extensions to the Synopsys Designware MIPI DSI
================================
Required properties:
- #address-cells: Should be <1>.
- #size-cells: Should be <0>.
- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
- reg: Represent the physical address range of the controller.
- interrupts: Represent the controller's interrupt to the CPU(s).
- clocks, clock-names: Phandles to the controller's pll reference
clock(ref) and APB clock(pclk), as described in [1].
- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
- ports: contain a port node with endpoint definitions as defined in [2].
For vopb,set the reg = <0> and set the reg = <1> for vopl.
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/media/video-interfaces.txt
Example:
mipi_dsi: mipi@ff960000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
reg = <0xff960000 0x4000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
clock-names = "ref", "pclk";
rockchip,grf = <&grf>;
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
mipi_in: port {
#address-cells = <1>;
#size-cells = <0>;
mipi_in_vopb: endpoint@0 {
reg = <0>;
remote-endpoint = <&vopb_out_mipi>;
};
mipi_in_vopl: endpoint@1 {
reg = <1>;
remote-endpoint = <&vopl_out_mipi>;
};
};
};
panel {
compatible ="boe,tv080wum-nl0";
reg = <0>;
enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_en>;
backlight = <&backlight>;
status = "okay";
};
};
|
