1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
|
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/extcon/wlf,arizona.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
maintainers:
- patches@opensource.cirrus.com
description: |
These devices are audio SoCs with extensive digital capabilities and a
range of analogue I/O.
This document lists Extcon specific bindings, see the primary binding
document ../mfd/arizona.yaml
properties:
wlf,hpdet-channel:
description:
Headphone detection channel. ARIZONA_ACCDET_MODE_HPL/1 sets the
headphone detect mode to HPDETL, ARIZONA_ACCDET_MODE_HPR/2 sets it
to HPDETR. If this node is not included or if the value is unknown,
then headphone detection mode is set to HPDETL.
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 1
maximum: 2
wlf,use-jd2:
description:
Use the additional JD input along with JD1 for dual pin jack detection.
type: boolean
wlf,use-jd2-nopull:
description:
Internal pull on JD2 is disabled when used for jack detection.
type: boolean
wlf,jd-invert:
description:
Invert the polarity of the jack detection switch.
type: boolean
wlf,micd-software-compare:
description:
Use a software comparison to determine mic presence.
type: boolean
wlf,micd-detect-debounce:
description:
Additional software microphone detection debounce specified in
milliseconds.
$ref: "/schemas/types.yaml#/definitions/uint32"
wlf,micd-pol-gpio:
description:
GPIO specifier for the GPIO controlling the headset polarity if one
exists.
maxItems: 1
wlf,micd-bias-start-time:
description:
Time allowed for MICBIAS to startup prior to performing microphone
detection, specified as per the ARIZONA_MICD_TIME_XXX defines.
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 12
wlf,micd-rate:
description:
Delay between successive microphone detection measurements, specified
as per the ARIZONA_MICD_TIME_XXX defines.
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 12
wlf,micd-dbtime:
description:
Microphone detection hardware debounces specified as the number of
measurements to take.
$ref: "/schemas/types.yaml#/definitions/uint32"
enum: [2, 4]
wlf,micd-timeout-ms:
description:
Timeout for microphone detection, specified in milliseconds.
$ref: "/schemas/types.yaml#/definitions/uint32"
wlf,micd-force-micbias:
description:
Force MICBIAS continuously on during microphone detection.
type: boolean
wlf,micd-configs:
description:
Headset polarity configurations (generally used for detection of
CTIA / OMTP headsets), the field can be of variable length but
should always be a multiple of 3 cells long, each three cell group
represents one polarity configuration.
$ref: "/schemas/types.yaml#/definitions/uint32-matrix"
items:
items:
- description:
The first cell defines the accessory detection pin, zero
will use MICDET1 and 0x2000 will use MICDET2.
enum: [ 0, 0x2000 ]
- description:
The second cell represents the MICBIAS to be used. Zero
will use MICVDD, 1-3 will use MICBIASx.
minimum: 0
maximum: 3
- description:
The third cell represents the value of the micd-pol-gpio
pin.
minimum: 0
maximum: 1
wlf,gpsw:
description:
Settings for the general purpose switch, set as one of the
ARIZONA_GPSW_XXX defines.
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 3
additionalProperties: true
|
