1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2020 Analog Devices Inc.
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/dac/adi,ad3552r.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices AD2552R DAC device driver
maintainers:
- Mihail Chindris <mihail.chindris@analog.com>
description: |
Bindings for the Analog Devices AD3552R DAC device and similar.
Datasheet can be found here:
https://www.analog.com/media/en/technical-documentation/data-sheets/ad3542r.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/ad3552r.pdf
properties:
compatible:
enum:
- adi,ad3542r
- adi,ad3552r
reg:
maxItems: 1
spi-max-frequency:
maximum: 30000000
reset-gpios:
maxItems: 1
ldac-gpios:
description: |
LDAC pin to be used as a hardware trigger to update the DAC channels.
maxItems: 1
vref-supply:
description:
The regulator to use as an external reference. If it does not exists the
internal reference will be used. External reference must be 2.5V
adi,vref-out-en:
description: Vref I/O driven by internal vref to 2.5V. If not set, Vref pin
will be floating.
type: boolean
adi,sdo-drive-strength:
description: |
Configure SDIO0 and SDIO1 strength levels:
- 0: low SDO drive strength.
- 1: medium low SDO drive strength.
- 2: medium high SDO drive strength.
- 3: high SDO drive strength
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
'#address-cells':
const: 1
'#size-cells':
const: 0
patternProperties:
"^channel@([0-1])$":
type: object
description: Configurations of the DAC Channels
additionalProperties: false
properties:
reg:
description: Channel number
enum: [0, 1]
adi,output-range-microvolt: true
custom-output-range-config:
type: object
description: Configuration of custom range when
adi,output-range-microvolt is not present.
The formulas for calculation the output voltages are
Vout_fs = 2.5 + [(GainN + Offset/1024) * 2.5 * Rfbx * 1.03]
Vout_zs = 2.5 - [(GainP + Offset/1024) * 2.5 * Rfbx * 1.03]
properties:
adi,gain-offset:
description: Gain offset used in the above formula
$ref: /schemas/types.yaml#/definitions/int32
maximum: 511
minimum: -511
adi,gain-scaling-p-inv-log2:
description: GainP = 1 / ( 2 ^ adi,gain-scaling-p-inv-log2)
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
adi,gain-scaling-n-inv-log2:
description: GainN = 1 / ( 2 ^ adi,gain-scaling-n-inv-log2)
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
adi,rfb-ohms:
description: Feedback Resistor
required:
- adi,gain-offset
- adi,gain-scaling-p-inv-log2
- adi,gain-scaling-n-inv-log2
- adi,rfb-ohms
required:
- reg
oneOf:
# If adi,output-range-microvolt is missing,
# custom-output-range-config must be used
- required:
- adi,output-range-microvolt
- required:
- custom-output-range-config
allOf:
- if:
properties:
compatible:
contains:
const: adi,ad3542r
then:
patternProperties:
"^channel@([0-1])$":
type: object
properties:
adi,output-range-microvolt:
description: |
Voltage output range of the channel as <minimum, maximum>
Required connections:
Rfb1x for: 0 to 2.5 V; 0 to 3V; 0 to 5 V;
Rfb2x for: 0 to 10 V; 2.5 to 7.5V; -5 to 5 V;
oneOf:
- items:
- const: 0
- enum: [2500000, 3000000, 5000000, 10000000]
- items:
- const: -2500000
- const: 7500000
- items:
- const: -5000000
- const: 5000000
required:
- adi,output-range-microvolt
- if:
properties:
compatible:
contains:
const: adi,ad3552r
then:
patternProperties:
"^channel@([0-1])$":
type: object
properties:
adi,output-range-microvolt:
description: |
Voltage output range of the channel as <minimum, maximum>
Required connections:
Rfb1x for: 0 to 2.5 V; 0 to 5 V;
Rfb2x for: 0 to 10 V; -5 to 5 V;
Rfb4x for: -10 to 10V
oneOf:
- items:
- const: 0
- enum: [2500000, 5000000, 10000000]
- items:
- const: -5000000
- const: 5000000
- items:
- const: -10000000
- const: 10000000
required:
- compatible
- reg
- spi-max-frequency
additionalProperties: false
examples:
- |
spi {
#address-cells = <1>;
#size-cells = <0>;
ad3552r@0 {
compatible = "adi,ad3552r";
reg = <0>;
spi-max-frequency = <20000000>;
#address-cells = <1>;
#size-cells = <0>;
channel@0 {
reg = <0>;
adi,output-range-microvolt = <0 10000000>;
};
channel@1 {
reg = <1>;
custom-output-range-config {
adi,gain-offset = <5>;
adi,gain-scaling-p-inv-log2 = <1>;
adi,gain-scaling-n-inv-log2 = <2>;
adi,rfb-ohms = <1>;
};
};
};
};
...
|
