summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/leds/leds-gpio.txt
blob: d21281b63d3800709551179f5fe807b22c67c69c (plain) (blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
LEDs connected to GPIO lines

Required properties:
- compatible : should be "gpio-leds".

Each LED is represented as a sub-node of the gpio-leds device.  Each
node's name represents the name of the corresponding LED.

LED sub-node properties:
- gpios :  Should specify the LED's GPIO, see "gpios property" in
  Documentation/devicetree/bindings/gpio/gpio.txt.  Active low LEDs should be
  indicated using flags in the GPIO specifier.
- function :  (optional)
  see Documentation/devicetree/bindings/leds/common.txt
- color :  (optional)
  see Documentation/devicetree/bindings/leds/common.txt
- label :  (optional)
  see Documentation/devicetree/bindings/leds/common.txt (deprecated)
- linux,default-trigger :  (optional)
  see Documentation/devicetree/bindings/leds/common.txt
- default-state:  (optional) The initial state of the LED.
  see Documentation/devicetree/bindings/leds/common.txt
- retain-state-suspended: (optional) The suspend state can be retained.Such
  as charge-led gpio.
- retain-state-shutdown: (optional) Retain the state of the LED on shutdown.
  Useful in BMC systems, for example when the BMC is rebooted while the host
  remains up.
- panic-indicator : (optional)
  see Documentation/devicetree/bindings/leds/common.txt

Examples:

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>

leds {
	compatible = "gpio-leds";
	led0 {
		gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
		linux,default-trigger = "disk-activity";
		function = LED_FUNCTION_DISK;
	};

	led1 {
		gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>;
		/* Keep LED on if BIOS detected hardware fault */
		default-state = "keep";
		function = LED_FUNCTION_FAULT;
	};
};

run-control {
	compatible = "gpio-leds";
	led0 {
		gpios = <&mpc8572 6 GPIO_ACTIVE_HIGH>;
		color = <LED_COLOR_ID_RED>;
		default-state = "off";
	};
	led1 {
		gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>;
		color = <LED_COLOR_ID_GREEN>;
		default-state = "on";
	};
};

leds {
	compatible = "gpio-leds";

	led0 {
		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
		linux,default-trigger = "max8903-charger-charging";
		retain-state-suspended;
		function = LED_FUNCTION_CHARGE;
	};
};