blob: daa2869377c5552e4ba66499453927755d57109d (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: "http://devicetree.org/schemas/media/i2c/chrontel,ch7322.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Chrontel HDMI-CEC Controller
maintainers:
- Jeff Chase <jnchase@google.com>
description:
The Chrontel CH7322 is a discrete HDMI-CEC controller. It is
programmable through I2C and drives a single CEC line.
properties:
compatible:
const: chrontel,ch7322
reg:
description: I2C device address
maxItems: 1
clocks:
maxItems: 1
interrupts:
maxItems: 1
reset-gpios:
description:
Reference to the GPIO connected to the RESET pin, if any. This
pin is active-low.
maxItems: 1
standby-gpios:
description:
Reference to the GPIO connected to the OE pin, if any. When low
the device will respond to power status requests with "standby"
if in auto mode.
maxItems: 1
# see ../cec.txt
hdmi-phandle:
description: phandle to the HDMI controller
required:
- compatible
- reg
- interrupts
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
ch7322@75 {
compatible = "chrontel,ch7322";
reg = <0x75>;
interrupts = <47 IRQ_TYPE_EDGE_RISING>;
standby-gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
hdmi-phandle = <&hdmi>;
};
};
|
