1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
|
# SPDX-License-Identifier: GPL-2.0+
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/qca,ar803x.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Atheros AR803x PHY
maintainers:
- Andrew Lunn <andrew@lunn.ch>
- Florian Fainelli <f.fainelli@gmail.com>
- Heiner Kallweit <hkallweit1@gmail.com>
description: |
Bindings for Qualcomm Atheros AR803x PHYs
allOf:
- $ref: ethernet-phy.yaml#
properties:
qca,clk-out-frequency:
description: Clock output frequency in Hertz.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [25000000, 50000000, 62500000, 125000000]
qca,clk-out-strength:
description: Clock output driver strength.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
qca,disable-smarteee:
description: Disable Atheros SmartEEE feature.
type: boolean
qca,keep-pll-enabled:
description: |
If set, keep the PLL enabled even if there is no link. Useful if you
want to use the clock output without an ethernet link.
Only supported on the AR8031.
type: boolean
qca,disable-hibernation-mode:
description: |
Disable Atheros AR803X PHYs hibernation mode. If present, indicates
that the hardware of PHY will not enter power saving mode when the
cable is disconnected. And the RX_CLK always keeps outputting a
valid clock.
type: boolean
qca,smarteee-tw-us-100m:
description: EEE Tw parameter for 100M links.
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 255
qca,smarteee-tw-us-1g:
description: EEE Tw parameter for gigabit links.
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 255
vddio-supply:
description: |
RGMII I/O voltage regulator (see regulator/regulator.yaml).
The PHY supports RGMII I/O voltages of 1.5V, 1.8V and 2.5V. You can
either connect this to the vddio-regulator (1.5V / 1.8V) or the
vddh-regulator (2.5V).
Only supported on the AR8031.
vddio-regulator:
type: object
description:
Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V.
$ref: /schemas/regulator/regulator.yaml
unevaluatedProperties: false
vddh-regulator:
type: object
description:
Dummy subnode to model the external connection of the PHY VDDH
regulator to VDDIO.
$ref: /schemas/regulator/regulator.yaml
unevaluatedProperties: false
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/net/qca-ar803x.h>
ethernet {
#address-cells = <1>;
#size-cells = <0>;
phy-mode = "rgmii-id";
ethernet-phy@0 {
reg = <0>;
qca,clk-out-frequency = <125000000>;
qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
vddio-supply = <&vddio>;
vddio: vddio-regulator {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
};
- |
#include <dt-bindings/net/qca-ar803x.h>
ethernet {
#address-cells = <1>;
#size-cells = <0>;
phy-mode = "rgmii-id";
ethernet-phy@0 {
reg = <0>;
qca,clk-out-frequency = <50000000>;
qca,keep-pll-enabled;
vddio-supply = <&vddh>;
vddh: vddh-regulator {
};
};
};
|
