1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
|
* ROCKCHIP type-c PHY
---------------------
Required properties:
- compatible : must be "rockchip,rk3399-typec-phy"
- reg: Address and length of the usb phy control register set
- rockchip,grf : phandle to the syscon managing the "general
register files"
- clocks : phandle + clock specifier for the phy clocks
- clock-names : string, clock name, must be "tcpdcore", "tcpdphy-ref";
- assigned-clocks: main clock, should be <&cru SCLK_UPHY0_TCPDCORE> or
<&cru SCLK_UPHY1_TCPDCORE>;
- assigned-clock-rates : the phy core clk frequency, shall be: 50000000
- resets : a list of phandle + reset specifier pairs
- reset-names : string reset name, must be:
"uphy", "uphy-pipe", "uphy-tcphy"
- extcon : extcon specifier for the Power Delivery
Note, there are 2 type-c phys for RK3399, and they are almost identical, except
these registers(description below), every register node contains 3 sections:
offset, enable bit, write mask bit.
- rockchip,typec-conn-dir : the register of type-c connector direction,
for type-c phy0, it must be <0xe580 0 16>;
for type-c phy1, it must be <0xe58c 0 16>;
- rockchip,usb3tousb2-en : the register of type-c force usb3 to usb2 enable
control.
for type-c phy0, it must be <0xe580 3 19>;
for type-c phy1, it must be <0xe58c 3 19>;
- rockchip,external-psm : the register of type-c phy external psm clock
selection.
for type-c phy0, it must be <0xe588 14 30>;
for type-c phy1, it must be <0xe594 14 30>;
- rockchip,pipe-status : the register of type-c phy pipe status.
for type-c phy0, it must be <0xe5c0 0 0>;
for type-c phy1, it must be <0xe5c0 16 16>;
Required nodes : a sub-node is required for each port the phy provides.
The sub-node name is used to identify dp or usb3 port,
and shall be the following entries:
* "dp-port" : the name of DP port.
* "usb3-port" : the name of USB3 port.
Required properties (port (child) node):
- #phy-cells : must be 0, See ./phy-bindings.txt for details.
Example:
tcphy0: phy@ff7c0000 {
compatible = "rockchip,rk3399-typec-phy";
reg = <0x0 0xff7c0000 0x0 0x40000>;
rockchip,grf = <&grf>;
extcon = <&fusb0>;
clocks = <&cru SCLK_UPHY0_TCPDCORE>,
<&cru SCLK_UPHY0_TCPDPHY_REF>;
clock-names = "tcpdcore", "tcpdphy-ref";
assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>;
assigned-clock-rates = <50000000>;
resets = <&cru SRST_UPHY0>,
<&cru SRST_UPHY0_PIPE_L00>,
<&cru SRST_P_UPHY0_TCPHY>;
reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
rockchip,typec-conn-dir = <0xe580 0 16>;
rockchip,usb3tousb2-en = <0xe580 3 19>;
rockchip,external-psm = <0xe588 14 30>;
rockchip,pipe-status = <0xe5c0 0 0>;
tcphy0_dp: dp-port {
#phy-cells = <0>;
};
tcphy0_usb3: usb3-port {
#phy-cells = <0>;
};
};
tcphy1: phy@ff800000 {
compatible = "rockchip,rk3399-typec-phy";
reg = <0x0 0xff800000 0x0 0x40000>;
rockchip,grf = <&grf>;
extcon = <&fusb1>;
clocks = <&cru SCLK_UPHY1_TCPDCORE>,
<&cru SCLK_UPHY1_TCPDPHY_REF>;
clock-names = "tcpdcore", "tcpdphy-ref";
assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>;
assigned-clock-rates = <50000000>;
resets = <&cru SRST_UPHY1>,
<&cru SRST_UPHY1_PIPE_L00>,
<&cru SRST_P_UPHY1_TCPHY>;
reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
rockchip,typec-conn-dir = <0xe58c 0 16>;
rockchip,usb3tousb2-en = <0xe58c 3 19>;
rockchip,external-psm = <0xe594 14 30>;
rockchip,pipe-status = <0xe5c0 16 16>;
tcphy1_dp: dp-port {
#phy-cells = <0>;
};
tcphy1_usb3: usb3-port {
#phy-cells = <0>;
};
};
|
