1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/intel,pinctrl-keembay.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Intel Keem Bay pin controller
maintainers:
- Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
description: |
Intel Keem Bay SoC integrates a pin controller which enables control
of pin directions, input/output values and configuration
for a total of 80 pins.
properties:
compatible:
const: intel,keembay-pinctrl
reg:
maxItems: 2
gpio-controller: true
'#gpio-cells':
const: 2
ngpios:
description: The number of GPIOs exposed.
const: 80
interrupts:
description:
Specifies the interrupt lines to be used by the controller.
Each interrupt line is shared by upto 4 GPIO lines.
maxItems: 8
interrupt-controller: true
'#interrupt-cells':
const: 2
patternProperties:
'^gpio@[0-9a-f]*$':
type: object
additionalProperties: false
description:
Child nodes can be specified to contain pin configuration information,
which can then be utilized by pinctrl client devices.
The following properties are supported.
properties:
pins:
description: |
The name(s) of the pins to be configured in the child node.
Supported pin names are "GPIO0" up to "GPIO79".
bias-disable: true
bias-pull-down: true
bias-pull-up: true
drive-strength:
description: IO pads drive strength in milli Ampere.
enum: [2, 4, 8, 12]
bias-bus-hold:
type: boolean
input-schmitt-enable:
type: boolean
slew-rate:
description: GPIO slew rate control.
0 - Fast(~100MHz)
1 - Slow(~50MHz)
enum: [0, 1]
additionalProperties: false
required:
- compatible
- reg
- gpio-controller
- ngpios
- '#gpio-cells'
- interrupts
- interrupt-controller
- '#interrupt-cells'
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
// Example 1
gpio@0 {
compatible = "intel,keembay-pinctrl";
reg = <0x600b0000 0x88>,
<0x600b0190 0x1ac>;
gpio-controller;
ngpios = <0x50>;
#gpio-cells = <0x2>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
};
// Example 2
gpio@1 {
compatible = "intel,keembay-pinctrl";
reg = <0x600c0000 0x88>,
<0x600c0190 0x1ac>;
gpio-controller;
ngpios = <0x50>;
#gpio-cells = <0x2>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
};
|
