1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/regulator/dlg,da9121.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Dialog Semiconductor DA9121 voltage regulator
maintainers:
- Adam Ward <Adam.Ward.opensource@diasemi.com>
description: |
Dialog Semiconductor DA9121 Single-channel 10A double-phase buck converter
Dialog Semiconductor DA9122 Double-channel 5A single-phase buck converter
Dialog Semiconductor DA9220 Double-channel 3A single-phase buck converter
Dialog Semiconductor DA9217 Single-channel 6A double-phase buck converter
Dialog Semiconductor DA9130 Single-channel 10A double-phase buck converter
Dialog Semiconductor DA9131 Double-channel 5A single-phase buck converter
Dialog Semiconductor DA9132 Double-channel 3A single-phase buck converter
Current limits
This is PER PHASE, and the current limit setting in the devices reflect
that with a maximum 10A limit. Allowing for transients at/near double
the rated current, this translates across the device range to per
channel figures as so...
| DA9121 DA9122 DA9220 DA9217 DA9140
| /DA9130 /DA9131 /DA9132
-----------------------------------------------------------------------------
Output current / channel | 10000000 5000000 3000000 6000000 40000000
Output current / phase | 5000000 5000000 3000000 3000000 9500000
-----------------------------------------------------------------------------
Min regulator-min-microvolt| 300000 300000 300000 300000 500000
Max regulator-max-microvolt| 1900000 1900000 1900000 1900000 1000000
Device hardware default | 1000000 1000000 1000000 1000000 1000000
-----------------------------------------------------------------------------
Min regulator-min-microamp | 7000000 3500000 3500000 7000000 26000000
Max regulator-max-microamp | 20000000 10000000 6000000 12000000 78000000
Device hardware default | 15000000 7500000 5500000 11000000 58000000
properties:
$nodename:
pattern: "pmic@[0-9a-f]{1,2}"
compatible:
enum:
- dlg,da9121
- dlg,da9122
- dlg,da9220
- dlg,da9217
- dlg,da9130
- dlg,da9131
- dlg,da9132
- dlg,da9140
reg:
maxItems: 1
description: Specifies the I2C slave address.
interrupts:
maxItems: 1
description: IRQ line information.
dlg,irq-polling-delay-passive-ms:
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 1000
maximum: 10000
description: |
Specify the polling period, measured in milliseconds, between interrupt status
update checks. Range 1000-10000 ms.
regulators:
type: object
$ref: regulator.yaml#
description: |
This node defines the settings for the BUCK. The content of the
sub-node is defined by the standard binding for regulators; see regulator.yaml.
The DA9121 regulator is bound using their names listed below
buck1 - BUCK1
buck2 - BUCK2 //DA9122, DA9220, DA9131, DA9132 only
patternProperties:
"^buck([1-2])$":
type: object
$ref: regulator.yaml#
properties:
regulator-mode:
maxItems: 1
description: Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h
regulator-initial-mode:
maxItems: 1
description: Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h
enable-gpios:
maxItems: 1
description: Specify a valid GPIO for platform control of the regulator
dlg,ripple-cancel:
$ref: "/schemas/types.yaml#/definitions/uint32"
description: |
Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h
Only present on multi-channel devices (DA9122, DA9220, DA9131, DA9132)
unevaluatedProperties: false
required:
- compatible
- reg
- regulators
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/regulator/dlg,da9121-regulator.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
pmic@68 {
compatible = "dlg,da9121";
reg = <0x68>;
interrupt-parent = <&gpio6>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
dlg,irq-polling-delay-passive-ms = <2000>;
regulators {
DA9121_BUCK1: buck1 {
regulator-name = "BUCK1";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1900000>;
regulator-min-microamp = <7000000>;
regulator-max-microamp = <20000000>;
regulator-boot-on;
regulator-initial-mode = <DA9121_BUCK_MODE_AUTO>;
enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
};
};
};
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/regulator/dlg,da9121-regulator.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
pmic@68 {
compatible = "dlg,da9122";
reg = <0x68>;
interrupt-parent = <&gpio6>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
dlg,irq-polling-delay-passive-ms = <2000>;
regulators {
DA9122_BUCK1: buck1 {
regulator-name = "BUCK1";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1900000>;
regulator-min-microamp = <3500000>;
regulator-max-microamp = <10000000>;
regulator-boot-on;
regulator-initial-mode = <DA9121_BUCK_MODE_AUTO>;
enable-gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
dlg,ripple-cancel = <DA9121_BUCK_RIPPLE_CANCEL_NONE>;
};
DA9122_BUCK2: buck2 {
regulator-name = "BUCK2";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1900000>;
regulator-min-microamp = <3500000>;
regulator-max-microamp = <10000000>;
regulator-boot-on;
regulator-initial-mode = <DA9121_BUCK_MODE_AUTO>;
enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
dlg,ripple-cancel = <DA9121_BUCK_RIPPLE_CANCEL_NONE>;
};
};
};
};
...
|
