[media] doc-rst: improve display of notes and warnings

There are several notes and warning mesages in the middle of
the media docbook. Use the ReST tags for that, as it makes
them visually better and hightlights them.

While here, modify a few ones to make them clearer.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

1 files changed, 35 insertions, 28 deletions

diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst
index 26eb6ee851c3d..11d15d3190e95 100644
--- a/Documentation/media/uapi/v4l/extended-controls.rst
+++ b/Documentation/media/uapi/v4l/extended-controls.rst
@@ -84,17 +84,20 @@ themselves than is possible with
 particular, this ioctl gives the dimensions of the N-dimensional array
 if this control consists of more than one element.
 
-It is important to realize that due to the flexibility of controls it is
-necessary to check whether the control you want to set actually is
-supported in the driver and what the valid range of values is. So use
-the :ref:`VIDIOC_QUERYCTRL` (or
-:ref:`VIDIOC_QUERY_EXT_CTRL <VIDIOC_QUERYCTRL>`) and
-:ref:`VIDIOC_QUERYMENU <VIDIOC_QUERYCTRL>` ioctls to check this. Also
-note that it is possible that some of the menu indices in a control of
-type ``V4L2_CTRL_TYPE_MENU`` may not be supported (``VIDIOC_QUERYMENU``
-will return an error). A good example is the list of supported MPEG
-audio bitrates. Some drivers only support one or two bitrates, others
-support a wider range.
+.. note::
+
+   #. It is important to realize that due to the flexibility of controls it is
+      necessary to check whether the control you want to set actually is
+      supported in the driver and what the valid range of values is. So use
+      the :ref:`VIDIOC_QUERYCTRL` (or :ref:`VIDIOC_QUERY_EXT_CTRL
+      <VIDIOC_QUERYCTRL>`) and :ref:`VIDIOC_QUERYMENU <VIDIOC_QUERYCTRL>`
+      ioctls to check this.
+
+   #. It is possible that some of the menu indices in a control of
+      type ``V4L2_CTRL_TYPE_MENU`` may not be supported (``VIDIOC_QUERYMENU``
+      will return an error). A good example is the list of supported MPEG
+      audio bitrates. Some drivers only support one or two bitrates, others
+      support a wider range.
 
 All controls use machine endianness.
 
@@ -181,10 +184,10 @@ Codec Control Reference
 Below all controls within the Codec control class are described. First
 the generic controls, then controls specific for certain hardware.
 
-Note: These controls are applicable to all codecs and not just MPEG. The
-defines are prefixed with V4L2_CID_MPEG/V4L2_MPEG as the controls
-were originally made for MPEG codecs and later extended to cover all
-encoding formats.
+.. note:: These controls are applicable to all codecs and not just MPEG. The
+   defines are prefixed with V4L2_CID_MPEG/V4L2_MPEG as the controls
+   were originally made for MPEG codecs and later extended to cover all
+   encoding formats.
 
 
 Generic Codec Controls
@@ -2282,13 +2285,15 @@ MFC 5.1 Control IDs
 ``V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF (integer)``
     Reaction coefficient for MFC rate control. Applicable to encoders.
 
-    Note 1: Valid only when the frame level RC is enabled.
+    .. note::
 
-    Note 2: For tight CBR, this field must be small (ex. 2 ~ 10). For
-    VBR, this field must be large (ex. 100 ~ 1000).
+       #. Valid only when the frame level RC is enabled.
 
-    Note 3: It is not recommended to use the greater number than
-    FRAME_RATE * (10^9 / BIT_RATE).
+       #. For tight CBR, this field must be small (ex. 2 ~ 10). For
+	  VBR, this field must be large (ex. 100 ~ 1000).
+
+       #. It is not recommended to use the greater number than
+	  FRAME_RATE * (10^9 / BIT_RATE).
 
 ``V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK (boolean)``
     Adaptive rate control for dark region. Valid only when H.264 and
@@ -4107,14 +4112,16 @@ transmitters for `VGA <http://en.wikipedia.org/wiki/Vga>`__,
 the receiver or transmitter subdevice that implements them, so they are
 only exposed on the ``/dev/v4l-subdev*`` device node.
 
-Note that these devices can have multiple input or output pads which are
-hooked up to e.g. HDMI connectors. Even though the subdevice will
-receive or transmit video from/to only one of those pads, the other pads
-can still be active when it comes to EDID (Extended Display
-Identification Data, :ref:`vesaedid`) and HDCP (High-bandwidth Digital
-Content Protection System, :ref:`hdcp`) processing, allowing the
-device to do the fairly slow EDID/HDCP handling in advance. This allows
-for quick switching between connectors.
+.. note::
+
+   Note that these devices can have multiple input or output pads which are
+   hooked up to e.g. HDMI connectors. Even though the subdevice will
+   receive or transmit video from/to only one of those pads, the other pads
+   can still be active when it comes to EDID (Extended Display
+   Identification Data, :ref:`vesaedid`) and HDCP (High-bandwidth Digital
+   Content Protection System, :ref:`hdcp`) processing, allowing the
+   device to do the fairly slow EDID/HDCP handling in advance. This allows
+   for quick switching between connectors.
 
 These pads appear in several of the controls in this section as
 bitmasks, one bit for each pad. Bit 0 corresponds to pad 0, bit 1 to pad