Merge tag 'qcom-dts-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt

Qualcomm Device Tree Changes for v4.11

* Add Coresight components for APQ8064
* Fixup PM8058 nodes
* Add APQ8060 gyro and accel support
* Enable SD600 HDMI support
* Add RIVA supprort for Sony Yuga and SD600
* Add PM8821 support
* Add MSM8974 ADSP, USB gadget, SMD, and SMP2P support
* Fix IPQ8064 clock frequencies

* tag 'qcom-dts-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  ARM: dts: qcom: Add apq8064 CoreSight components
  ARM: dts: Add gyro and accel to APQ8060 Dragonboard
  ARM: dts: reference PM8058 as IRQ parent
  ARM: dts: rename MSM8660/APQ8060 pmicintc to pm8058
  ARM: dts: sd-600eval: enable 1.8v regulator on LS expansion
  ARM: dts: sd-600eval: add hdmi support
  ARM: dts: move hdmi pinctrl out of board file.
  ARM: dts: qcom: sd600eval: Enable riva-pil
  ARM: dts: qcom: sd600-eval: pm8921_s2 regulator properties
  ARM: dts: qcom: apq8064-sony-yuga: Enable riva-pil
  ARM: dts: qcom: apq8064: Add riva-pil node
  ARM: dts: apq8064: add support to pm8821
  arm: dts: qcom: Fix ipq board clock rates
  ARM: dts: msm8974: Remove "unused" reserved region
  ARM: dts: msm8974: Add ADSP PIL node
  ARM: dts: msm8974: Add ADSP smp2p and smd nodes
  ARM: dts: qcom: msm8974: Add USB gadget nodes

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 282 insertions, 5 deletions

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 407a4610f4a7e..14a6f5ed02de6 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -22,13 +22,18 @@
 			reg = <0x80000000 0x200000>;
 			no-map;
 		};
+
+		wcnss_mem: wcnss@8f000000 {
+			reg = <0x8f000000 0x700000>;
+			no-map;
+		};
 	};
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		CPU0: cpu@0 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
@@ -39,7 +44,7 @@
 			cpu-idle-states = <&CPU_SPC>;
 		};
 
-		cpu@1 {
+		CPU1: cpu@1 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
@@ -50,7 +55,7 @@
 			cpu-idle-states = <&CPU_SPC>;
 		};
 
-		cpu@2 {
+		CPU2: cpu@2 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
@@ -61,7 +66,7 @@
 			cpu-idle-states = <&CPU_SPC>;
 		};
 
-		cpu@3 {
+		CPU3: cpu@3 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
@@ -180,7 +185,7 @@
 	};
 
 	clocks {
-		cxo_board {
+		cxo_board: cxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <19200000>;
@@ -631,6 +636,33 @@
 			clock-names = "core";
 		};
 
+		ssbi@c00000 {
+			compatible = "qcom,ssbi";
+			reg = <0x00c00000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+
+			pm8821: pmic@1 {
+				compatible = "qcom,pm8821";
+				interrupt-parent = <&tlmm_pinmux>;
+				interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pm8821_mpps: mpps@50 {
+					compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
+					reg = <0x50>;
+					interrupts = <24 IRQ_TYPE_NONE>,
+						     <25 IRQ_TYPE_NONE>,
+						     <26 IRQ_TYPE_NONE>,
+						     <27 IRQ_TYPE_NONE>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+		};
+
 		qcom,ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00500000 0x1000>;
@@ -1327,6 +1359,8 @@
 
 		hdmi: hdmi-tx@4a00000 {
 			compatible = "qcom,hdmi-tx-8960";
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_pinctrl>;
 			reg = <0x04a00000 0x2f0>;
 			reg-names = "core_physical";
 			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
@@ -1420,6 +1454,249 @@
 				};
 			};
 		};
+
+		riva: riva-pil@3204000 {
+			compatible = "qcom,riva-pil";
+
+			reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			interrupts-extended = <&intc GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smsm 6 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal";
+
+			memory-region = <&wcnss_mem>;
+
+			vddcx-supply = <&pm8921_s3>;
+			vddmx-supply = <&pm8921_l24>;
+			vddpx-supply = <&pm8921_s4>;
+
+			status = "disabled";
+
+			iris {
+				compatible = "qcom,wcn3660";
+
+				clocks = <&cxo_board>;
+				clock-names = "xo";
+
+				vddxo-supply = <&pm8921_l4>;
+				vddrfa-supply = <&pm8921_s2>;
+				vddpa-supply = <&pm8921_l10>;
+				vdddig-supply = <&pm8921_lvs2>;
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&l2cc 8 25>;
+				qcom,smd-edge = <6>;
+
+				label = "riva";
+
+				wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&riva>;
+
+					bt {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		etb@1a01000 {
+			compatible = "coresight-etb10", "arm,primecell";
+			reg = <0x1a01000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			port {
+				etb_in: endpoint {
+					slave-mode;
+					remote-endpoint = <&replicator_out0>;
+				};
+			};
+		};
+
+		tpiu@1a03000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x1a03000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			port {
+				tpiu_in: endpoint {
+					slave-mode;
+					remote-endpoint = <&replicator_out1>;
+				};
+			};
+		};
+
+		replicator {
+			compatible = "arm,coresight-replicator";
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint = <&etb_in>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint = <&tpiu_in>;
+					};
+				};
+				port@2 {
+					reg = <0>;
+					replicator_in: endpoint {
+						slave-mode;
+						remote-endpoint = <&funnel_out>;
+					};
+				};
+			};
+		};
+
+		funnel@1a04000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x1a04000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * Not described input ports:
+				 * 2 - connected to STM component
+				 * 3 - not-connected
+				 * 6 - not-connected
+				 * 7 - not-connected
+				 */
+				port@0 {
+					reg = <0>;
+					funnel_in0: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					funnel_in1: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+				port@4 {
+					reg = <4>;
+					funnel_in4: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+				port@5 {
+					reg = <5>;
+					funnel_in5: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+				port@8 {
+					reg = <0>;
+					funnel_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+		};
+
+		etm@1a1c000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x1a1c000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU0>;
+
+			port {
+				etm0_out: endpoint {
+					remote-endpoint = <&funnel_in0>;
+				};
+			};
+		};
+
+		etm@1a1d000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x1a1d000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU1>;
+
+			port {
+				etm1_out: endpoint {
+					remote-endpoint = <&funnel_in1>;
+				};
+			};
+		};
+
+		etm@1a1e000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x1a1e000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU2>;
+
+			port {
+				etm2_out: endpoint {
+					remote-endpoint = <&funnel_in4>;
+				};
+			};
+		};
+
+		etm@1a1f000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x1a1f000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU3>;
+
+			port {
+				etm3_out: endpoint {
+					remote-endpoint = <&funnel_in5>;
+				};
+			};
+		};
 	};
 };
 #include "qcom-apq8064-pins.dtsi"