Merge tag 'mips_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Paul Burton:

 - kexec support for the generic MIPS platform when running on a CPU
   including the MIPS Coherence Manager & related hardware.

 - Improvements to the definition of memory barriers used around MMIO
   accesses, and fixes in their use.

 - Switch to CONFIG_NO_BOOTMEM from Mike Rapoport, finally dropping
   reliance on the old bootmem code.

 - A number of fixes & improvements for Loongson 3 systems.

 - DT & config updates for the Microsemi Ocelot platform.

 - Workaround to enable USB power on the Netgear WNDR3400v3.

 - Various cleanups & fixes.

* tag 'mips_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (51 commits)
  MIPS: Cleanup DSP ASE detection
  MIPS: dts: Change upper case to lower case
  MIPS: generic: Add Network, SPI and I2C to ocelot_defconfig
  MIPS: Loongson-3: Fix BRIDGE irq delivery problem
  MIPS: Loongson-3: Fix CPU UART irq delivery problem
  MIPS: Remove unused PREF, PREFE & PREFX macros
  MIPS: lib: Use kernel_pref & user_pref in memcpy()
  MIPS: Remove unused CAT macro
  MIPS: Add kernel_pref & user_pref helpers
  MIPS: Remove unused TTABLE macro
  MIPS: Remove unused PIC macros
  MIPS: Remove unused MOVN & MOVZ macros
  MIPS: Provide actually relaxed MMIO accessors
  MIPS: Enforce strong ordering for MMIO accessors
  MIPS: Correct `mmiowb' barrier for `wbflush' platforms
  MIPS: Define MMIO ordering barriers
  MIPS: mscc: add PCB120 to the ocelot fitImage
  MIPS: mscc: add DT for Ocelot PCB120
  MIPS: memset: Limit excessive `noreorder' assembly mode use
  MIPS: memset: Fix CPU_DADDI_WORKAROUNDS `small_fixup' regression
  ...

6 files changed, 161 insertions, 29 deletions

diff --git a/arch/mips/boot/dts/lantiq/danube.dtsi b/arch/mips/boot/dts/lantiq/danube.dtsi
index 2dd950181f8a6..510be63c8bdf1 100644
--- a/arch/mips/boot/dts/lantiq/danube.dtsi
+++ b/arch/mips/boot/dts/lantiq/danube.dtsi
@@ -10,12 +10,12 @@
 		};
 	};
 
-	biu@1F800000 {
+	biu@1f800000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "lantiq,biu", "simple-bus";
-		reg = <0x1F800000 0x800000>;
-		ranges = <0x0 0x1F800000 0x7FFFFF>;
+		reg = <0x1f800000 0x800000>;
+		ranges = <0x0 0x1f800000 0x7fffff>;
 
 		icu0: icu@80200 {
 			#interrupt-cells = <1>;
@@ -24,18 +24,18 @@
 			reg = <0x80200 0x120>;
 		};
 
-		watchdog@803F0 {
+		watchdog@803f0 {
 			compatible = "lantiq,wdt";
-			reg = <0x803F0 0x10>;
+			reg = <0x803f0 0x10>;
 		};
 	};
 
-	sram@1F000000 {
+	sram@1f000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "lantiq,sram";
-		reg = <0x1F000000 0x800000>;
-		ranges = <0x0 0x1F000000 0x7FFFFF>;
+		reg = <0x1f000000 0x800000>;
+		ranges = <0x0 0x1f000000 0x7fffff>;
 
 		eiu0: eiu@101000 {
 			#interrupt-cells = <1>;
@@ -66,41 +66,41 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "lantiq,fpi", "simple-bus";
-		ranges = <0x0 0x10000000 0xEEFFFFF>;
-		reg = <0x10000000 0xEF00000>;
+		ranges = <0x0 0x10000000 0xeefffff>;
+		reg = <0x10000000 0xef00000>;
 
-		gptu@E100A00 {
+		gptu@e100a00 {
 			compatible = "lantiq,gptu-xway";
-			reg = <0xE100A00 0x100>;
+			reg = <0xe100a00 0x100>;
 		};
 
-		serial@E100C00 {
+		serial@e100c00 {
 			compatible = "lantiq,asc";
-			reg = <0xE100C00 0x400>;
+			reg = <0xe100c00 0x400>;
 			interrupt-parent = <&icu0>;
 			interrupts = <112 113 114>;
 		};
 
-		dma0: dma@E104100 {
+		dma0: dma@e104100 {
 			compatible = "lantiq,dma-xway";
-			reg = <0xE104100 0x800>;
+			reg = <0xe104100 0x800>;
 		};
 
-		ebu0: ebu@E105300 {
+		ebu0: ebu@e105300 {
 			compatible = "lantiq,ebu-xway";
-			reg = <0xE105300 0x100>;
+			reg = <0xe105300 0x100>;
 		};
 
-		pci0: pci@E105400 {
+		pci0: pci@e105400 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			compatible = "lantiq,pci-xway";
 			bus-range = <0x0 0x0>;
 			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000	/* pci memory */
-				  0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
+				  0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
 			reg = <0x7000000 0x8000		/* config space */
-				0xE105400 0x400>;	/* pci bridge */
+				0xe105400 0x400>;	/* pci bridge */
 		};
 	};
 };
diff --git a/arch/mips/boot/dts/lantiq/easy50712.dts b/arch/mips/boot/dts/lantiq/easy50712.dts
index c37a33962f282..1ce20b7d05cb8 100644
--- a/arch/mips/boot/dts/lantiq/easy50712.dts
+++ b/arch/mips/boot/dts/lantiq/easy50712.dts
@@ -52,14 +52,14 @@
 			};
 		};
 
-		gpio: pinmux@E100B10 {
+		gpio: pinmux@e100b10 {
 			compatible = "lantiq,danube-pinctrl";
 			pinctrl-names = "default";
 			pinctrl-0 = <&state_default>;
 
 			#gpio-cells = <2>;
 			gpio-controller;
-			reg = <0xE100B10 0xA0>;
+			reg = <0xe100b10 0xa0>;
 
 			state_default: pinmux {
 				stp {
@@ -82,26 +82,26 @@
 			};
 		};
 
-		etop@E180000 {
+		etop@e180000 {
 			compatible = "lantiq,etop-xway";
-			reg = <0xE180000 0x40000>;
+			reg = <0xe180000 0x40000>;
 			interrupt-parent = <&icu0>;
 			interrupts = <73 78>;
 			phy-mode = "rmii";
 			mac-address = [ 00 11 22 33 44 55 ];
 		};
 
-		stp0: stp@E100BB0 {
+		stp0: stp@e100bb0 {
 			#gpio-cells = <2>;
 			compatible = "lantiq,gpio-stp-xway";
 			gpio-controller;
-			reg = <0xE100BB0 0x40>;
+			reg = <0xe100bb0 0x40>;
 
 			lantiq,shadow = <0xfff>;
 			lantiq,groups = <0x3>;
 		};
 
-		pci@E105400 {
+		pci@e105400 {
 			lantiq,bus-clock = <33333333>;
 			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
diff --git a/arch/mips/boot/dts/mscc/Makefile b/arch/mips/boot/dts/mscc/Makefile
index 9a9bb7ea05034..ec6f5b2bf0932 100644
--- a/arch/mips/boot/dts/mscc/Makefile
+++ b/arch/mips/boot/dts/mscc/Makefile
@@ -1,3 +1,3 @@
-dtb-$(CONFIG_MSCC_OCELOT)	+= ocelot_pcb123.dtb
+dtb-$(CONFIG_MSCC_OCELOT)	+= ocelot_pcb123.dtb ocelot_pcb120.dtb
 
 obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
index 8ce317c5b9edc..90c60d42f571a 100644
--- a/arch/mips/boot/dts/mscc/ocelot.dtsi
+++ b/arch/mips/boot/dts/mscc/ocelot.dtsi
@@ -78,6 +78,19 @@
 			status = "disabled";
 		};
 
+		i2c: i2c@100400 {
+			compatible = "mscc,ocelot-i2c", "snps,designware-i2c";
+			pinctrl-0 = <&i2c_pins>;
+			pinctrl-names = "default";
+			reg = <0x100400 0x100>, <0x198 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <8>;
+			clocks = <&ahb_clk>;
+
+			status = "disabled";
+		};
+
 		uart2: serial@100800 {
 			pinctrl-0 = <&uart2_pins>;
 			pinctrl-names = "default";
@@ -182,6 +195,11 @@
 			interrupts = <13>;
 			#interrupt-cells = <2>;
 
+			i2c_pins: i2c-pins {
+				pins = "GPIO_16", "GPIO_17";
+				function = "twi";
+			};
+
 			uart_pins: uart-pins {
 				pins = "GPIO_6", "GPIO_7";
 				function = "uart";
@@ -196,6 +214,7 @@
 				pins = "GPIO_14", "GPIO_15";
 				function = "miim1";
 			};
+
 		};
 
 		mdio0: mdio@107009c {
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
new file mode 100644
index 0000000000000..33991fd209f53
--- /dev/null
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2017 Microsemi Corporation */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy-ocelot-serdes.h>
+#include "ocelot.dtsi"
+
+/ {
+	compatible = "mscc,ocelot-pcb120", "mscc,ocelot";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0e000000>;
+	};
+};
+
+&gpio {
+	phy_int_pins: phy_int_pins {
+		pins = "GPIO_4";
+		function = "gpio";
+	};
+};
+
+&mdio0 {
+	status = "okay";
+};
+
+&mdio1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&miim1>, <&phy_int_pins>;
+
+	phy7: ethernet-phy@0 {
+		reg = <0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gpio>;
+	};
+	phy6: ethernet-phy@1 {
+		reg = <1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gpio>;
+	};
+	phy5: ethernet-phy@2 {
+		reg = <2>;
+		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gpio>;
+	};
+	phy4: ethernet-phy@3 {
+		reg = <3>;
+		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gpio>;
+	};
+};
+
+&port0 {
+	phy-handle = <&phy0>;
+};
+
+&port1 {
+	phy-handle = <&phy1>;
+};
+
+&port2 {
+	phy-handle = <&phy2>;
+};
+
+&port3 {
+	phy-handle = <&phy3>;
+};
+
+&port4 {
+	phy-handle = <&phy7>;
+	phy-mode = "sgmii";
+	phys = <&serdes 4 SERDES1G(2)>;
+};
+
+&port5 {
+	phy-handle = <&phy4>;
+	phy-mode = "sgmii";
+	phys = <&serdes 5 SERDES1G(5)>;
+};
+
+&port6 {
+	phy-handle = <&phy6>;
+	phy-mode = "sgmii";
+	phys = <&serdes 6 SERDES1G(3)>;
+};
+
+&port9 {
+	phy-handle = <&phy5>;
+	phy-mode = "sgmii";
+	phys = <&serdes 9 SERDES1G(4)>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
index 2266027759f98..ef852f382da8d 100644
--- a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
@@ -36,6 +36,12 @@
 	};
 };
 
+&i2c {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	status = "okay";
+};
+
 &mdio0 {
 	status = "okay";
 };