summaryrefslogtreecommitdiffstats
path: root/arch/mips/boot
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-03-05 11:28:25 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2019-03-05 11:28:25 -0800
commitd9862cfbe2099deb83f0e9c1932c91f2d9c50464 (patch)
tree7092ef41113269f30b5429868a9d161e171c746d /arch/mips/boot
parent8feed3efa8022107bcb3432ac3ec9917e078ae70 (diff)
parentaeb669d41ffabb91b1542f1f802cb12a989fced0 (diff)
downloadlinux-0-day-d9862cfbe2099deb83f0e9c1932c91f2d9c50464.tar.gz
linux-0-day-d9862cfbe2099deb83f0e9c1932c91f2d9c50464.tar.xz
Merge tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Paul Burton: - Support for the MIPSr6 MemoryMapID register & Global INValidate TLB (GINVT) instructions, allowing for more efficient TLB maintenance when running on a CPU such as the I6500 that supports these. - Enable huge page support for MIPS64r6. - Optimize post-DMA cache sync by removing that code entirely for kernel configurations in which we know it won't be needed. - The number of pages allocated for interrupt stacks is now calculated correctly, where before we would wastefully allocate too much memory in some configurations. - The ath79 platform migrates to devicetree. - The bcm47xx platform sees fixes for the Buffalo WHR-G54S board. - The ingenic/jz4740 platform gains support for appended devicetrees. - The cavium_octeon, lantiq, loongson32 & sgi-ip27 platforms all see cleanups as do various pieces of core architecture code. * tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (66 commits) MIPS: lantiq: Remove separate GPHY Firmware loader MIPS: ingenic: Add support for appended devicetree MIPS: SGI-IP27: rework HUB interrupts MIPS: SGI-IP27: do boot CPU init later MIPS: SGI-IP27: do xtalk scanning later MIPS: SGI-IP27: use pr_info/pr_emerg and pr_cont to fix output MIPS: SGI-IP27: clean up bridge access and header files MIPS: SGI-IP27: get rid of volatile and hubreg_t MIPS: irq: Allocate accurate order pages for irq stack MIPS: dma-noncoherent: Remove bogus condition in dma_sync_phys() MIPS: eBPF: Remove REG_32BIT_ZERO_EX MIPS: eBPF: Always return sign extended 32b values MIPS: CM: Fix indentation MIPS: BCM47XX: Fix/improve Buffalo WHR-G54S support MIPS: OCTEON: program rx/tx-delay always from DT MIPS: OCTEON: delete board-specific link status MIPS: OCTEON: don't lie about interface type of CN3005 board MIPS: OCTEON: warn if deprecated link status is being used MIPS: OCTEON: add fixed-link nodes to in-kernel device tree MIPS: Delete unused flush_cache_sigtramp() ...
Diffstat (limited to 'arch/mips/boot')
-rw-r--r--arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts14
-rw-r--r--arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts6
2 files changed, 20 insertions, 0 deletions
diff --git a/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts
index 0fa3dd1819ff6..dda0559cef50e 100644
--- a/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts
+++ b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts
@@ -180,14 +180,28 @@
ethernet@0 {
phy-handle = <&phy2>;
cavium,alt-phy-handle = <&phy100>;
+ rx-delay = <0>;
+ tx-delay = <0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
};
ethernet@1 {
phy-handle = <&phy3>;
cavium,alt-phy-handle = <&phy101>;
+ rx-delay = <0>;
+ tx-delay = <0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
};
ethernet@2 {
phy-handle = <&phy4>;
cavium,alt-phy-handle = <&phy102>;
+ rx-delay = <0>;
+ tx-delay = <0>;
};
ethernet@3 {
compatible = "cavium,octeon-3860-pip-port";
diff --git a/arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts b/arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts
index 243e5dc444fb1..962f37fbc7db8 100644
--- a/arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts
+++ b/arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts
@@ -33,12 +33,18 @@
interface@0 {
ethernet@0 {
phy-handle = <&phy7>;
+ rx-delay = <0>;
+ tx-delay = <0x10>;
};
ethernet@1 {
phy-handle = <&phy6>;
+ rx-delay = <0>;
+ tx-delay = <0x10>;
};
ethernet@2 {
phy-handle = <&phy5>;
+ rx-delay = <0>;
+ tx-delay = <0x10>;
};
};
};