crypto: x86/crct10dif-pcl - cleanup and optimizations

The x86, arm, and arm64 asm implementations of crct10dif are very
difficult to understand partly because many of the comments, labels, and
macros are named incorrectly: the lengths mentioned are usually off by a
factor of two from the actual code.  Many other things are unnecessarily
convoluted as well, e.g. there are many more fold constants than
actually needed and some aren't fully reduced.

This series therefore cleans up all these implementations to be much
more maintainable.  I also made some small optimizations where I saw
opportunities, resulting in slightly better performance.

This patch cleans up the x86 version.

As part of this, I removed support for len < 16 from the x86 assembly;
now the glue code falls back to the generic table-based implementation
in this case.  Due to the overhead of kernel_fpu_begin(), this actually
significantly improves performance on these lengths.  (And even if
kernel_fpu_begin() were free, the generic code is still faster for about
len < 11.)  This removal also eliminates error-prone special cases and
makes the x86, arm32, and arm64 ports of the code match more closely.

Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

2 files changed, 235 insertions, 559 deletions

diff --git a/arch/x86/crypto/crct10dif-pcl-asm_64.S b/arch/x86/crypto/crct10dif-pcl-asm_64.S
index de04d3e98d8d3..3d873e67749d7 100644
--- a/arch/x86/crypto/crct10dif-pcl-asm_64.S
+++ b/arch/x86/crypto/crct10dif-pcl-asm_64.S
@@ -43,609 +43,291 @@
 # LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-########################################################################
-#       Function API:
-#       UINT16 crc_t10dif_pcl(
-#               UINT16 init_crc, //initial CRC value, 16 bits
-#               const unsigned char *buf, //buffer pointer to calculate CRC on
-#               UINT64 len //buffer length in bytes (64-bit data)
-#       );
 #
 #       Reference paper titled "Fast CRC Computation for Generic
 #	Polynomials Using PCLMULQDQ Instruction"
 #       URL: http://www.intel.com/content/dam/www/public/us/en/documents
 #  /white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf
 #
-#
 
 #include <linux/linkage.h>
 
 .text
 
-#define        arg1 %rdi
-#define        arg2 %rsi
-#define        arg3 %rdx
-
-#define        arg1_low32 %edi
+#define		init_crc	%edi
+#define		buf		%rsi
+#define		len		%rdx
+
+#define		FOLD_CONSTS	%xmm10
+#define		BSWAP_MASK	%xmm11
+
+# Fold reg1, reg2 into the next 32 data bytes, storing the result back into
+# reg1, reg2.
+.macro	fold_32_bytes	offset, reg1, reg2
+	movdqu	\offset(buf), %xmm9
+	movdqu	\offset+16(buf), %xmm12
+	pshufb	BSWAP_MASK, %xmm9
+	pshufb	BSWAP_MASK, %xmm12
+	movdqa	\reg1, %xmm8
+	movdqa	\reg2, %xmm13
+	pclmulqdq	$0x00, FOLD_CONSTS, \reg1
+	pclmulqdq	$0x11, FOLD_CONSTS, %xmm8
+	pclmulqdq	$0x00, FOLD_CONSTS, \reg2
+	pclmulqdq	$0x11, FOLD_CONSTS, %xmm13
+	pxor	%xmm9 , \reg1
+	xorps	%xmm8 , \reg1
+	pxor	%xmm12, \reg2
+	xorps	%xmm13, \reg2
+.endm
+
+# Fold src_reg into dst_reg.
+.macro	fold_16_bytes	src_reg, dst_reg
+	movdqa	\src_reg, %xmm8
+	pclmulqdq	$0x11, FOLD_CONSTS, \src_reg
+	pclmulqdq	$0x00, FOLD_CONSTS, %xmm8
+	pxor	%xmm8, \dst_reg
+	xorps	\src_reg, \dst_reg
+.endm
 
-ENTRY(crc_t10dif_pcl)
+#
+# u16 crc_t10dif_pcl(u16 init_crc, const *u8 buf, size_t len);
+#
+# Assumes len >= 16.
+#
 .align 16
+ENTRY(crc_t10dif_pcl)
 
-	# adjust the 16-bit initial_crc value, scale it to 32 bits
-	shl	$16, arg1_low32
-
-	# Allocate Stack Space
-	mov     %rsp, %rcx
-	sub	$16*2, %rsp
-	# align stack to 16 byte boundary
-	and     $~(0x10 - 1), %rsp
-
-	# check if smaller than 256
-	cmp	$256, arg3
-
-	# for sizes less than 128, we can't fold 64B at a time...
-	jl	_less_than_128
-
-
-	# load the initial crc value
-	movd	arg1_low32, %xmm10	# initial crc
-
-	# crc value does not need to be byte-reflected, but it needs
-	# to be moved to the high part of the register.
-	# because data will be byte-reflected and will align with
-	# initial crc at correct place.
-	pslldq	$12, %xmm10
-
-	movdqa  SHUF_MASK(%rip), %xmm11
-	# receive the initial 64B data, xor the initial crc value
-	movdqu	16*0(arg2), %xmm0
-	movdqu	16*1(arg2), %xmm1
-	movdqu	16*2(arg2), %xmm2
-	movdqu	16*3(arg2), %xmm3
-	movdqu	16*4(arg2), %xmm4
-	movdqu	16*5(arg2), %xmm5
-	movdqu	16*6(arg2), %xmm6
-	movdqu	16*7(arg2), %xmm7
-
-	pshufb	%xmm11, %xmm0
-	# XOR the initial_crc value
-	pxor	%xmm10, %xmm0
-	pshufb	%xmm11, %xmm1
-	pshufb	%xmm11, %xmm2
-	pshufb	%xmm11, %xmm3
-	pshufb	%xmm11, %xmm4
-	pshufb	%xmm11, %xmm5
-	pshufb	%xmm11, %xmm6
-	pshufb	%xmm11, %xmm7
-
-	movdqa	rk3(%rip), %xmm10	#xmm10 has rk3 and rk4
-					#imm value of pclmulqdq instruction
-					#will determine which constant to use
-
-	#################################################################
-	# we subtract 256 instead of 128 to save one instruction from the loop
-	sub	$256, arg3
-
-	# at this section of the code, there is 64*x+y (0<=y<64) bytes of
-	# buffer. The _fold_64_B_loop will fold 64B at a time
-	# until we have 64+y Bytes of buffer
-
-
-	# fold 64B at a time. This section of the code folds 4 xmm
-	# registers in parallel
-_fold_64_B_loop:
-
-	# update the buffer pointer
-	add	$128, arg2		#    buf += 64#
-
-	movdqu	16*0(arg2), %xmm9
-	movdqu	16*1(arg2), %xmm12
-	pshufb	%xmm11, %xmm9
-	pshufb	%xmm11, %xmm12
-	movdqa	%xmm0, %xmm8
-	movdqa	%xmm1, %xmm13
-	pclmulqdq	$0x0 , %xmm10, %xmm0
-	pclmulqdq	$0x11, %xmm10, %xmm8
-	pclmulqdq	$0x0 , %xmm10, %xmm1
-	pclmulqdq	$0x11, %xmm10, %xmm13
-	pxor	%xmm9 , %xmm0
-	xorps	%xmm8 , %xmm0
-	pxor	%xmm12, %xmm1
-	xorps	%xmm13, %xmm1
-
-	movdqu	16*2(arg2), %xmm9
-	movdqu	16*3(arg2), %xmm12
-	pshufb	%xmm11, %xmm9
-	pshufb	%xmm11, %xmm12
-	movdqa	%xmm2, %xmm8
-	movdqa	%xmm3, %xmm13
-	pclmulqdq	$0x0, %xmm10, %xmm2
-	pclmulqdq	$0x11, %xmm10, %xmm8
-	pclmulqdq	$0x0, %xmm10, %xmm3
-	pclmulqdq	$0x11, %xmm10, %xmm13
-	pxor	%xmm9 , %xmm2
-	xorps	%xmm8 , %xmm2
-	pxor	%xmm12, %xmm3
-	xorps	%xmm13, %xmm3
-
-	movdqu	16*4(arg2), %xmm9
-	movdqu	16*5(arg2), %xmm12
-	pshufb	%xmm11, %xmm9
-	pshufb	%xmm11, %xmm12
-	movdqa	%xmm4, %xmm8
-	movdqa	%xmm5, %xmm13
-	pclmulqdq	$0x0,  %xmm10, %xmm4
-	pclmulqdq	$0x11, %xmm10, %xmm8
-	pclmulqdq	$0x0,  %xmm10, %xmm5
-	pclmulqdq	$0x11, %xmm10, %xmm13
-	pxor	%xmm9 ,  %xmm4
-	xorps	%xmm8 ,  %xmm4
-	pxor	%xmm12,  %xmm5
-	xorps	%xmm13,  %xmm5
-
-	movdqu	16*6(arg2), %xmm9
-	movdqu	16*7(arg2), %xmm12
-	pshufb	%xmm11, %xmm9
-	pshufb	%xmm11, %xmm12
-	movdqa	%xmm6 , %xmm8
-	movdqa	%xmm7 , %xmm13
-	pclmulqdq	$0x0 , %xmm10, %xmm6
-	pclmulqdq	$0x11, %xmm10, %xmm8
-	pclmulqdq	$0x0 , %xmm10, %xmm7
-	pclmulqdq	$0x11, %xmm10, %xmm13
-	pxor	%xmm9 , %xmm6
-	xorps	%xmm8 , %xmm6
-	pxor	%xmm12, %xmm7
-	xorps	%xmm13, %xmm7
-
-	sub	$128, arg3
-
-	# check if there is another 64B in the buffer to be able to fold
-	jge	_fold_64_B_loop
-	##################################################################
-
-
-	add	$128, arg2
-	# at this point, the buffer pointer is pointing at the last y Bytes
-	# of the buffer the 64B of folded data is in 4 of the xmm
-	# registers: xmm0, xmm1, xmm2, xmm3
-
-
-	# fold the 8 xmm registers to 1 xmm register with different constants
-
-	movdqa	rk9(%rip), %xmm10
-	movdqa	%xmm0, %xmm8
-	pclmulqdq	$0x11, %xmm10, %xmm0
-	pclmulqdq	$0x0 , %xmm10, %xmm8
-	pxor	%xmm8, %xmm7
-	xorps	%xmm0, %xmm7
-
-	movdqa	rk11(%rip), %xmm10
-	movdqa	%xmm1, %xmm8
-	pclmulqdq	 $0x11, %xmm10, %xmm1
-	pclmulqdq	 $0x0 , %xmm10, %xmm8
-	pxor	%xmm8, %xmm7
-	xorps	%xmm1, %xmm7
-
-	movdqa	rk13(%rip), %xmm10
-	movdqa	%xmm2, %xmm8
-	pclmulqdq	 $0x11, %xmm10, %xmm2
-	pclmulqdq	 $0x0 , %xmm10, %xmm8
-	pxor	%xmm8, %xmm7
-	pxor	%xmm2, %xmm7
-
-	movdqa	rk15(%rip), %xmm10
-	movdqa	%xmm3, %xmm8
-	pclmulqdq	$0x11, %xmm10, %xmm3
-	pclmulqdq	$0x0 , %xmm10, %xmm8
-	pxor	%xmm8, %xmm7
-	xorps	%xmm3, %xmm7
-
-	movdqa	rk17(%rip), %xmm10
-	movdqa	%xmm4, %xmm8
-	pclmulqdq	$0x11, %xmm10, %xmm4
-	pclmulqdq	$0x0 , %xmm10, %xmm8
-	pxor	%xmm8, %xmm7
-	pxor	%xmm4, %xmm7
-
-	movdqa	rk19(%rip), %xmm10
-	movdqa	%xmm5, %xmm8
-	pclmulqdq	$0x11, %xmm10, %xmm5
-	pclmulqdq	$0x0 , %xmm10, %xmm8
-	pxor	%xmm8, %xmm7
-	xorps	%xmm5, %xmm7
-
-	movdqa	rk1(%rip), %xmm10	#xmm10 has rk1 and rk2
-					#imm value of pclmulqdq instruction
-					#will determine which constant to use
-	movdqa	%xmm6, %xmm8
-	pclmulqdq	$0x11, %xmm10, %xmm6
-	pclmulqdq	$0x0 , %xmm10, %xmm8
-	pxor	%xmm8, %xmm7
-	pxor	%xmm6, %xmm7
-
-
-	# instead of 64, we add 48 to the loop counter to save 1 instruction
-	# from the loop instead of a cmp instruction, we use the negative
-	# flag with the jl instruction
-	add	$128-16, arg3
-	jl	_final_reduction_for_128
-
-	# now we have 16+y bytes left to reduce. 16 Bytes is in register xmm7
-	# and the rest is in memory. We can fold 16 bytes at a time if y>=16
-	# continue folding 16B at a time
-
-_16B_reduction_loop:
+	movdqa	.Lbswap_mask(%rip), BSWAP_MASK
+
+	# For sizes less than 256 bytes, we can't fold 128 bytes at a time.
+	cmp	$256, len
+	jl	.Lless_than_256_bytes
+
+	# Load the first 128 data bytes.  Byte swapping is necessary to make the
+	# bit order match the polynomial coefficient order.
+	movdqu	16*0(buf), %xmm0
+	movdqu	16*1(buf), %xmm1
+	movdqu	16*2(buf), %xmm2
+	movdqu	16*3(buf), %xmm3
+	movdqu	16*4(buf), %xmm4
+	movdqu	16*5(buf), %xmm5
+	movdqu	16*6(buf), %xmm6
+	movdqu	16*7(buf), %xmm7
+	add	$128, buf
+	pshufb	BSWAP_MASK, %xmm0
+	pshufb	BSWAP_MASK, %xmm1
+	pshufb	BSWAP_MASK, %xmm2
+	pshufb	BSWAP_MASK, %xmm3
+	pshufb	BSWAP_MASK, %xmm4
+	pshufb	BSWAP_MASK, %xmm5
+	pshufb	BSWAP_MASK, %xmm6
+	pshufb	BSWAP_MASK, %xmm7
+
+	# XOR the first 16 data *bits* with the initial CRC value.
+	pxor	%xmm8, %xmm8
+	pinsrw	$7, init_crc, %xmm8
+	pxor	%xmm8, %xmm0
+
+	movdqa	.Lfold_across_128_bytes_consts(%rip), FOLD_CONSTS
+
+	# Subtract 128 for the 128 data bytes just consumed.  Subtract another
+	# 128 to simplify the termination condition of the following loop.
+	sub	$256, len
+
+	# While >= 128 data bytes remain (not counting xmm0-7), fold the 128
+	# bytes xmm0-7 into them, storing the result back into xmm0-7.
+.Lfold_128_bytes_loop:
+	fold_32_bytes	0, %xmm0, %xmm1
+	fold_32_bytes	32, %xmm2, %xmm3
+	fold_32_bytes	64, %xmm4, %xmm5
+	fold_32_bytes	96, %xmm6, %xmm7
+	add	$128, buf
+	sub	$128, len
+	jge	.Lfold_128_bytes_loop
+
+	# Now fold the 112 bytes in xmm0-xmm6 into the 16 bytes in xmm7.
+
+	# Fold across 64 bytes.
+	movdqa	.Lfold_across_64_bytes_consts(%rip), FOLD_CONSTS
+	fold_16_bytes	%xmm0, %xmm4
+	fold_16_bytes	%xmm1, %xmm5
+	fold_16_bytes	%xmm2, %xmm6
+	fold_16_bytes	%xmm3, %xmm7
+	# Fold across 32 bytes.
+	movdqa	.Lfold_across_32_bytes_consts(%rip), FOLD_CONSTS
+	fold_16_bytes	%xmm4, %xmm6
+	fold_16_bytes	%xmm5, %xmm7
+	# Fold across 16 bytes.
+	movdqa	.Lfold_across_16_bytes_consts(%rip), FOLD_CONSTS
+	fold_16_bytes	%xmm6, %xmm7
+
+	# Add 128 to get the correct number of data bytes remaining in 0...127
+	# (not counting xmm7), following the previous extra subtraction by 128.
+	# Then subtract 16 to simplify the termination condition of the
+	# following loop.
+	add	$128-16, len
+
+	# While >= 16 data bytes remain (not counting xmm7), fold the 16 bytes
+	# xmm7 into them, storing the result back into xmm7.
+	jl	.Lfold_16_bytes_loop_done
+.Lfold_16_bytes_loop:
 	movdqa	%xmm7, %xmm8
-	pclmulqdq	$0x11, %xmm10, %xmm7
-	pclmulqdq	$0x0 , %xmm10, %xmm8
+	pclmulqdq	$0x11, FOLD_CONSTS, %xmm7
+	pclmulqdq	$0x00, FOLD_CONSTS, %xmm8
 	pxor	%xmm8, %xmm7
-	movdqu	(arg2), %xmm0
-	pshufb	%xmm11, %xmm0
+	movdqu	(buf), %xmm0
+	pshufb	BSWAP_MASK, %xmm0
 	pxor	%xmm0 , %xmm7
-	add	$16, arg2
-	sub	$16, arg3
-	# instead of a cmp instruction, we utilize the flags with the
-	# jge instruction equivalent of: cmp arg3, 16-16
-	# check if there is any more 16B in the buffer to be able to fold
-	jge	_16B_reduction_loop
-
-	#now we have 16+z bytes left to reduce, where 0<= z < 16.
-	#first, we reduce the data in the xmm7 register
-
-
-_final_reduction_for_128:
-	# check if any more data to fold. If not, compute the CRC of
-	# the final 128 bits
-	add	$16, arg3
-	je	_128_done
-
-	# here we are getting data that is less than 16 bytes.
-	# since we know that there was data before the pointer, we can
-	# offset the input pointer before the actual point, to receive
-	# exactly 16 bytes. after that the registers need to be adjusted.
-_get_last_two_xmms:
+	add	$16, buf
+	sub	$16, len
+	jge	.Lfold_16_bytes_loop
+
+.Lfold_16_bytes_loop_done:
+	# Add 16 to get the correct number of data bytes remaining in 0...15
+	# (not counting xmm7), following the previous extra subtraction by 16.
+	add	$16, len
+	je	.Lreduce_final_16_bytes
+
+.Lhandle_partial_segment:
+	# Reduce the last '16 + len' bytes where 1 <= len <= 15 and the first 16
+	# bytes are in xmm7 and the rest are the remaining data in 'buf'.  To do
+	# this without needing a fold constant for each possible 'len', redivide
+	# the bytes into a first chunk of 'len' bytes and a second chunk of 16
+	# bytes, then fold the first chunk into the second.
+
 	movdqa	%xmm7, %xmm2
 
-	movdqu	-16(arg2, arg3), %xmm1
-	pshufb	%xmm11, %xmm1
+	# xmm1 = last 16 original data bytes
+	movdqu	-16(buf, len), %xmm1
+	pshufb	BSWAP_MASK, %xmm1
 
-	# get rid of the extra data that was loaded before
-	# load the shift constant
-	lea	pshufb_shf_table+16(%rip), %rax
-	sub	arg3, %rax
+	# xmm2 = high order part of second chunk: xmm7 left-shifted by 'len' bytes.
+	lea	.Lbyteshift_table+16(%rip), %rax
+	sub	len, %rax
 	movdqu	(%rax), %xmm0
-
-	# shift xmm2 to the left by arg3 bytes
 	pshufb	%xmm0, %xmm2
 
-	# shift xmm7 to the right by 16-arg3 bytes
-	pxor	mask1(%rip), %xmm0
+	# xmm7 = first chunk: xmm7 right-shifted by '16-len' bytes.
+	pxor	.Lmask1(%rip), %xmm0
 	pshufb	%xmm0, %xmm7
+
+	# xmm1 = second chunk: 'len' bytes from xmm1 (low-order bytes),
+	# then '16-len' bytes from xmm2 (high-order bytes).
 	pblendvb	%xmm2, %xmm1	#xmm0 is implicit
 
-	# fold 16 Bytes
-	movdqa	%xmm1, %xmm2
+	# Fold the first chunk into the second chunk, storing the result in xmm7.
 	movdqa	%xmm7, %xmm8
-	pclmulqdq	$0x11, %xmm10, %xmm7
-	pclmulqdq	$0x0 , %xmm10, %xmm8
+	pclmulqdq	$0x11, FOLD_CONSTS, %xmm7
+	pclmulqdq	$0x00, FOLD_CONSTS, %xmm8
 	pxor	%xmm8, %xmm7
-	pxor	%xmm2, %xmm7
+	pxor	%xmm1, %xmm7
 
-_128_done:
-	# compute crc of a 128-bit value
-	movdqa	rk5(%rip), %xmm10	# rk5 and rk6 in xmm10
-	movdqa	%xmm7, %xmm0
+.Lreduce_final_16_bytes:
+	# Reduce the 128-bit value M(x), stored in xmm7, to the final 16-bit CRC
 
-	#64b fold
-	pclmulqdq	$0x1, %xmm10, %xmm7
-	pslldq	$8   ,  %xmm0
-	pxor	%xmm0,  %xmm7
+	# Load 'x^48 * (x^48 mod G(x))' and 'x^48 * (x^80 mod G(x))'.
+	movdqa	.Lfinal_fold_consts(%rip), FOLD_CONSTS
 
-	#32b fold
+	# Fold the high 64 bits into the low 64 bits, while also multiplying by
+	# x^64.  This produces a 128-bit value congruent to x^64 * M(x) and
+	# whose low 48 bits are 0.
 	movdqa	%xmm7, %xmm0
+	pclmulqdq	$0x11, FOLD_CONSTS, %xmm7 # high bits * x^48 * (x^80 mod G(x))
+	pslldq	$8, %xmm0
+	pxor	%xmm0, %xmm7			  # + low bits * x^64
 
-	pand	mask2(%rip), %xmm0
-
-	psrldq	$12, %xmm7
-	pclmulqdq	$0x10, %xmm10, %xmm7
-	pxor	%xmm0, %xmm7
-
-	#barrett reduction
-_barrett:
-	movdqa	rk7(%rip), %xmm10	# rk7 and rk8 in xmm10
+	# Fold the high 32 bits into the low 96 bits.  This produces a 96-bit
+	# value congruent to x^64 * M(x) and whose low 48 bits are 0.
 	movdqa	%xmm7, %xmm0
-	pclmulqdq	$0x01, %xmm10, %xmm7
-	pslldq	$4, %xmm7
-	pclmulqdq	$0x11, %xmm10, %xmm7
+	pand	.Lmask2(%rip), %xmm0		  # zero high 32 bits
+	psrldq	$12, %xmm7			  # extract high 32 bits
+	pclmulqdq	$0x00, FOLD_CONSTS, %xmm7 # high 32 bits * x^48 * (x^48 mod G(x))
+	pxor	%xmm0, %xmm7			  # + low bits
 
-	pslldq	$4, %xmm7
-	pxor	%xmm0, %xmm7
-	pextrd	$1, %xmm7, %eax
+	# Load G(x) and floor(x^48 / G(x)).
+	movdqa	.Lbarrett_reduction_consts(%rip), FOLD_CONSTS
 
-_cleanup:
-	# scale the result back to 16 bits
-	shr	$16, %eax
-	mov     %rcx, %rsp
+	# Use Barrett reduction to compute the final CRC value.
+	movdqa	%xmm7, %xmm0
+	pclmulqdq	$0x11, FOLD_CONSTS, %xmm7 # high 32 bits * floor(x^48 / G(x))
+	psrlq	$32, %xmm7			  # /= x^32
+	pclmulqdq	$0x00, FOLD_CONSTS, %xmm7 # *= G(x)
+	psrlq	$48, %xmm0
+	pxor	%xmm7, %xmm0		     # + low 16 nonzero bits
+	# Final CRC value (x^16 * M(x)) mod G(x) is in low 16 bits of xmm0.
+
+	pextrw	$0, %xmm0, %eax
 	ret
 
-########################################################################
-
 .align 16
-_less_than_128:
-
-	# check if there is enough buffer to be able to fold 16B at a time
-	cmp	$32, arg3
-	jl	_less_than_32
-	movdqa  SHUF_MASK(%rip), %xmm11
+.Lless_than_256_bytes:
+	# Checksumming a buffer of length 16...255 bytes
 
-	# now if there is, load the constants
-	movdqa	rk1(%rip), %xmm10	# rk1 and rk2 in xmm10
+	# Load the first 16 data bytes.
+	movdqu	(buf), %xmm7
+	pshufb	BSWAP_MASK, %xmm7
+	add	$16, buf
 
-	movd	arg1_low32, %xmm0	# get the initial crc value
-	pslldq	$12, %xmm0	# align it to its correct place
-	movdqu	(arg2), %xmm7	# load the plaintext
-	pshufb	%xmm11, %xmm7	# byte-reflect the plaintext
+	# XOR the first 16 data *bits* with the initial CRC value.
+	pxor	%xmm0, %xmm0
+	pinsrw	$7, init_crc, %xmm0
 	pxor	%xmm0, %xmm7
 
-
-	# update the buffer pointer
-	add	$16, arg2
-
-	# update the counter. subtract 32 instead of 16 to save one
-	# instruction from the loop
-	sub	$32, arg3
-
-	jmp	_16B_reduction_loop
-
-
-.align 16
-_less_than_32:
-	# mov initial crc to the return value. this is necessary for
-	# zero-length buffers.
-	mov	arg1_low32, %eax
-	test	arg3, arg3
-	je	_cleanup
-
-	movdqa  SHUF_MASK(%rip), %xmm11
-
-	movd	arg1_low32, %xmm0	# get the initial crc value
-	pslldq	$12, %xmm0	# align it to its correct place
-
-	cmp	$16, arg3
-	je	_exact_16_left
-	jl	_less_than_16_left
-
-	movdqu	(arg2), %xmm7	# load the plaintext
-	pshufb	%xmm11, %xmm7	# byte-reflect the plaintext
-	pxor	%xmm0 , %xmm7	# xor the initial crc value
-	add	$16, arg2
-	sub	$16, arg3
-	movdqa	rk1(%rip), %xmm10	# rk1 and rk2 in xmm10
-	jmp	_get_last_two_xmms
-
-
-.align 16
-_less_than_16_left:
-	# use stack space to load data less than 16 bytes, zero-out
-	# the 16B in memory first.
-
-	pxor	%xmm1, %xmm1
-	mov	%rsp, %r11
-	movdqa	%xmm1, (%r11)
-
-	cmp	$4, arg3
-	jl	_only_less_than_4
-
-	# backup the counter value
-	mov	arg3, %r9
-	cmp	$8, arg3
-	jl	_less_than_8_left
-
-	# load 8 Bytes
-	mov	(arg2), %rax
-	mov	%rax, (%r11)
-	add	$8, %r11
-	sub	$8, arg3
-	add	$8, arg2
-_less_than_8_left:
-
-	cmp	$4, arg3
-	jl	_less_than_4_left
-
-	# load 4 Bytes
-	mov	(arg2), %eax
-	mov	%eax, (%r11)
-	add	$4, %r11
-	sub	$4, arg3
-	add	$4, arg2
-_less_than_4_left:
-
-	cmp	$2, arg3
-	jl	_less_than_2_left
-
-	# load 2 Bytes
-	mov	(arg2), %ax
-	mov	%ax, (%r11)
-	add	$2, %r11
-	sub	$2, arg3
-	add	$2, arg2
-_less_than_2_left:
-	cmp     $1, arg3
-        jl      _zero_left
-
-	# load 1 Byte
-	mov	(arg2), %al
-	mov	%al, (%r11)
-_zero_left:
-	movdqa	(%rsp), %xmm7
-	pshufb	%xmm11, %xmm7
-	pxor	%xmm0 , %xmm7	# xor the initial crc value
-
-	# shl r9, 4
-	lea	pshufb_shf_table+16(%rip), %rax
-	sub	%r9, %rax
-	movdqu	(%rax), %xmm0
-	pxor	mask1(%rip), %xmm0
-
-	pshufb	%xmm0, %xmm7
-	jmp	_128_done
-
-.align 16
-_exact_16_left:
-	movdqu	(arg2), %xmm7
-	pshufb	%xmm11, %xmm7
-	pxor	%xmm0 , %xmm7   # xor the initial crc value
-
-	jmp	_128_done
-
-_only_less_than_4:
-	cmp	$3, arg3
-	jl	_only_less_than_3
-
-	# load 3 Bytes
-	mov	(arg2), %al
-	mov	%al, (%r11)
-
-	mov	1(arg2), %al
-	mov	%al, 1(%r11)
-
-	mov	2(arg2), %al
-	mov	%al, 2(%r11)
-
-	movdqa	 (%rsp), %xmm7
-	pshufb	 %xmm11, %xmm7
-	pxor	 %xmm0 , %xmm7  # xor the initial crc value
-
-	psrldq	$5, %xmm7
-
-	jmp	_barrett
-_only_less_than_3:
-	cmp	$2, arg3
-	jl	_only_less_than_2
-
-	# load 2 Bytes
-	mov	(arg2), %al
-	mov	%al, (%r11)
-
-	mov	1(arg2), %al
-	mov	%al, 1(%r11)
-
-	movdqa	(%rsp), %xmm7
-	pshufb	%xmm11, %xmm7
-	pxor	%xmm0 , %xmm7   # xor the initial crc value
-
-	psrldq	$6, %xmm7
-
-	jmp	_barrett
-_only_less_than_2:
-
-	# load 1 Byte
-	mov	(arg2), %al
-	mov	%al, (%r11)
-
-	movdqa	(%rsp), %xmm7
-	pshufb	%xmm11, %xmm7
-	pxor	%xmm0 , %xmm7   # xor the initial crc value
-
-	psrldq	$7, %xmm7
-
-	jmp	_barrett
-
+	movdqa	.Lfold_across_16_bytes_consts(%rip), FOLD_CONSTS
+	cmp	$16, len
+	je	.Lreduce_final_16_bytes		# len == 16
+	sub	$32, len
+	jge	.Lfold_16_bytes_loop		# 32 <= len <= 255
+	add	$16, len
+	jmp	.Lhandle_partial_segment	# 17 <= len <= 31
 ENDPROC(crc_t10dif_pcl)
 
 .section	.rodata, "a", @progbits
 .align 16
-# precomputed constants
-# these constants are precomputed from the poly:
-# 0x8bb70000 (0x8bb7 scaled to 32 bits)
-# Q = 0x18BB70000
-# rk1 = 2^(32*3) mod Q << 32
-# rk2 = 2^(32*5) mod Q << 32
-# rk3 = 2^(32*15) mod Q << 32
-# rk4 = 2^(32*17) mod Q << 32
-# rk5 = 2^(32*3) mod Q << 32
-# rk6 = 2^(32*2) mod Q << 32
-# rk7 = floor(2^64/Q)
-# rk8 = Q
-rk1:
-.quad 0x2d56000000000000
-rk2:
-.quad 0x06df000000000000
-rk3:
-.quad 0x9d9d000000000000
-rk4:
-.quad 0x7cf5000000000000
-rk5:
-.quad 0x2d56000000000000
-rk6:
-.quad 0x1368000000000000
-rk7:
-.quad 0x00000001f65a57f8
-rk8:
-.quad 0x000000018bb70000
-
-rk9:
-.quad 0xceae000000000000
-rk10:
-.quad 0xbfd6000000000000
-rk11:
-.quad 0x1e16000000000000
-rk12:
-.quad 0x713c000000000000
-rk13:
-.quad 0xf7f9000000000000
-rk14:
-.quad 0x80a6000000000000
-rk15:
-.quad 0x044c000000000000
-rk16:
-.quad 0xe658000000000000
-rk17:
-.quad 0xad18000000000000
-rk18:
-.quad 0xa497000000000000
-rk19:
-.quad 0x6ee3000000000000
-rk20:
-.quad 0xe7b5000000000000
-
 
+# Fold constants precomputed from the polynomial 0x18bb7
+# G(x) = x^16 + x^15 + x^11 + x^9 + x^8 + x^7 + x^5 + x^4 + x^2 + x^1 + x^0
+.Lfold_across_128_bytes_consts:
+	.quad		0x0000000000006123	# x^(8*128)	mod G(x)
+	.quad		0x0000000000002295	# x^(8*128+64)	mod G(x)
+.Lfold_across_64_bytes_consts:
+	.quad		0x0000000000001069	# x^(4*128)	mod G(x)
+	.quad		0x000000000000dd31	# x^(4*128+64)	mod G(x)
+.Lfold_across_32_bytes_consts:
+	.quad		0x000000000000857d	# x^(2*128)	mod G(x)
+	.quad		0x0000000000007acc	# x^(2*128+64)	mod G(x)
+.Lfold_across_16_bytes_consts:
+	.quad		0x000000000000a010	# x^(1*128)	mod G(x)
+	.quad		0x0000000000001faa	# x^(1*128+64)	mod G(x)
+.Lfinal_fold_consts:
+	.quad		0x1368000000000000	# x^48 * (x^48 mod G(x))
+	.quad		0x2d56000000000000	# x^48 * (x^80 mod G(x))
+.Lbarrett_reduction_consts:
+	.quad		0x0000000000018bb7	# G(x)
+	.quad		0x00000001f65a57f8	# floor(x^48 / G(x))
 
 .section	.rodata.cst16.mask1, "aM", @progbits, 16
 .align 16
-mask1:
-.octa 0x80808080808080808080808080808080
+.Lmask1:
+	.octa	0x80808080808080808080808080808080
 
 .section	.rodata.cst16.mask2, "aM", @progbits, 16
 .align 16
-mask2:
-.octa 0x00000000FFFFFFFFFFFFFFFFFFFFFFFF
+.Lmask2:
+	.octa	0x00000000FFFFFFFFFFFFFFFFFFFFFFFF
+
+.section	.rodata.cst16.bswap_mask, "aM", @progbits, 16
+.align 16
+.Lbswap_mask:
+	.octa	0x000102030405060708090A0B0C0D0E0F
 
-.section	.rodata.cst16.SHUF_MASK, "aM", @progbits, 16
+.section	.rodata.cst32.byteshift_table, "aM", @progbits, 32
 .align 16
-SHUF_MASK:
-.octa 0x000102030405060708090A0B0C0D0E0F
-
-.section	.rodata.cst32.pshufb_shf_table, "aM", @progbits, 32
-.align 32
-pshufb_shf_table:
-# use these values for shift constants for the pshufb instruction
-# different alignments result in values as shown:
-#	DDQ 0x008f8e8d8c8b8a898887868584838281 # shl 15 (16-1) / shr1
-#	DDQ 0x01008f8e8d8c8b8a8988878685848382 # shl 14 (16-3) / shr2
-#	DDQ 0x0201008f8e8d8c8b8a89888786858483 # shl 13 (16-4) / shr3
-#	DDQ 0x030201008f8e8d8c8b8a898887868584 # shl 12 (16-4) / shr4
-#	DDQ 0x04030201008f8e8d8c8b8a8988878685 # shl 11 (16-5) / shr5
-#	DDQ 0x0504030201008f8e8d8c8b8a89888786 # shl 10 (16-6) / shr6
-#	DDQ 0x060504030201008f8e8d8c8b8a898887 # shl 9  (16-7) / shr7
-#	DDQ 0x07060504030201008f8e8d8c8b8a8988 # shl 8  (16-8) / shr8
-#	DDQ 0x0807060504030201008f8e8d8c8b8a89 # shl 7  (16-9) / shr9
-#	DDQ 0x090807060504030201008f8e8d8c8b8a # shl 6  (16-10) / shr10
-#	DDQ 0x0a090807060504030201008f8e8d8c8b # shl 5  (16-11) / shr11
-#	DDQ 0x0b0a090807060504030201008f8e8d8c # shl 4  (16-12) / shr12
-#	DDQ 0x0c0b0a090807060504030201008f8e8d # shl 3  (16-13) / shr13
-#	DDQ 0x0d0c0b0a090807060504030201008f8e # shl 2  (16-14) / shr14
-#	DDQ 0x0e0d0c0b0a090807060504030201008f # shl 1  (16-15) / shr15
-.octa 0x8f8e8d8c8b8a89888786858483828100
-.octa 0x000e0d0c0b0a09080706050403020100
+# For 1 <= len <= 15, the 16-byte vector beginning at &byteshift_table[16 - len]
+# is the index vector to shift left by 'len' bytes, and is also {0x80, ...,
+# 0x80} XOR the index vector to shift right by '16 - len' bytes.
+.Lbyteshift_table:
+	.byte		 0x0, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87
+	.byte		0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f
+	.byte		 0x0,  0x1,  0x2,  0x3,  0x4,  0x5,  0x6,  0x7
+	.byte		 0x8,  0x9,  0xa,  0xb,  0xc,  0xd,  0xe , 0x0
diff --git a/arch/x86/crypto/crct10dif-pclmul_glue.c b/arch/x86/crypto/crct10dif-pclmul_glue.c
index cd4df93225014..0e785c0b23542 100644
--- a/arch/x86/crypto/crct10dif-pclmul_glue.c
+++ b/arch/x86/crypto/crct10dif-pclmul_glue.c
@@ -33,18 +33,12 @@
 #include <asm/cpufeatures.h>
 #include <asm/cpu_device_id.h>
 
-asmlinkage __u16 crc_t10dif_pcl(__u16 crc, const unsigned char *buf,
-				size_t len);
+asmlinkage u16 crc_t10dif_pcl(u16 init_crc, const u8 *buf, size_t len);
 
 struct chksum_desc_ctx {
 	__u16 crc;
 };
 
-/*
- * Steps through buffer one byte at at time, calculates reflected
- * crc using table.
- */
-
 static int chksum_init(struct shash_desc *desc)
 {
 	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
@@ -59,7 +53,7 @@ static int chksum_update(struct shash_desc *desc, const u8 *data,
 {
 	struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
 
-	if (irq_fpu_usable()) {
+	if (length >= 16 && irq_fpu_usable()) {
 		kernel_fpu_begin();
 		ctx->crc = crc_t10dif_pcl(ctx->crc, data, length);
 		kernel_fpu_end();
@@ -79,7 +73,7 @@ static int chksum_final(struct shash_desc *desc, u8 *out)
 static int __chksum_finup(__u16 *crcp, const u8 *data, unsigned int len,
 			u8 *out)
 {
-	if (irq_fpu_usable()) {
+	if (len >= 16 && irq_fpu_usable()) {
 		kernel_fpu_begin();
 		*(__u16 *)out = crc_t10dif_pcl(*crcp, data, len);
 		kernel_fpu_end();