diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2018-04-05 21:18:09 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2018-04-05 21:18:09 -0700 |
| commit | b240b419db5d624ce7a5a397d6f62a1a686009ec (patch) | |
| tree | 82062f2df3ba3dcd07c759658c36548d5481b516 /arch | |
| parent | 9c2dd8405c0cc2288d6098df40c19569d17553e4 (diff) | |
| parent | 518d2f43c358da2072948f64df99b1bd417288dc (diff) | |
| download | linux-0-day-b240b419db5d624ce7a5a397d6f62a1a686009ec.tar.gz linux-0-day-b240b419db5d624ce7a5a397d6f62a1a686009ec.tar.xz | |
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree updates from Arnd Bergmann:
"This is the usual set of changes for device trees, with over 700
non-merged changesets. There is an ongoing set of dtc warning fixes
and the usual bugfixes, cleanups and added device support.
The most interesting bit as usual is support for new machines listed
below:
- The Allwinner H6 makes its debut with the Pine-H64 board, and we
get two new machines based on its older siblings: the H5 based
OrangePi Zero+ and the A64 based Teres-I Laptop from Olimex. On the
32-bit side, we add The Olimex som204 based on Allwinner A20, and
the Banana Pi M2 Zero development board (based on H2).
- NVIDIA adds support for Tegra194 aka "Xavier", plus their p2972
development board and p2888 CPU module.
- The Nuvoton npcm750 is a BMC that was newly added, for now we only
support running on the evaluation board.
- STmicroelectronics stm32 gains support for the stm32mp157c and two
evaluation boards.
- The Toradex Colibri board family grows a few members based on the
i.MX6ULL variant.
- The Advantec DMS-BA16 is a Qseven module using the NXP i.MX6 family
of chips.
- The Phytec phyBOARD Mira is a family of industrial boards based on
i.MX6. For now, four models get added.
- TI am335x based PDU-001 is an industrial embedded machine used for
traffic monitoring
- The Aspeed platform now supports running on the BMC on the Qualcomm
Centriq 2400 server
- Samsung Exynos4 based Galaxy S3 is a family of mobile phones
Qualcomm msm8974 based Galaxy S5 is a rather different phone made
by the same company.
- The Xilinx Zynq and ZynqMP platforms now gained a lot of dts file
for the various boards made by Xilinx themselves, as well as the
Digilent Zybo Z7.
- The ARM Versatile family now supports the "IB2" interface board.
- The Renesas H2 based "Stout" and the H3 based Salvator-X are more
evaluation boards named after a kind of beer, as most of them are.
The r8a77980 (V3H) based "Condor" apparently doesn't follow that
tradition. ;-)
- ROC-RK3328-CC is a simple developement board from the Libre
Computer Project, based on the Rockchips RK3328 SoC
- Haiku is another development board plus Qseven module based on
Rockchips RK3368 and made by Theobroma Systems"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (701 commits)
arm: dts: modify Nuvoton NPCM7xx device tree structure
arm: dts: modify Makefile NPCM750 configuration name
arm: dts: modify clock binding in NPCM750 device tree
arm: dts: modify timer register size in NPCM750 device tree
arm: dts: modify UART compatible name in NPCM750 device tree
arm: dts: add watchdog device to NPCM750 device tree
arm64: dts: uniphier: add ethernet node for PXs3
ARM: dts: uniphier: add pinctrl groups of ethernet for second instance
arm: dts: kirkwood*.dts: use SPDX-License-Identifier for board using GPL-2.0+
arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0+/MIT
arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0
arm: dts: armada-385-turris-omnia: use SPDX-License-Identifier
arm: dts: armada-385-db-ap: use SPDX-License-Identifier
arm: dts: armada-388-rd: use SPDX-License-Identifier
arm: dts: armada-xp-db-xc3-24g4xg: use SPDX-License-Identifier
arm: dts: armada-xp-db-dxbc2: use SPDX-License-Identifier
arm: dts: armada-370-db: use SPDX-License-Identifier
arm: dts: armada-*.dts: use SPDX-License-Identifier for most of the Armada based board
arm: dts: armada-xp-98dx: use SPDX-License-Identifier for prestara 98d SoCs
arm: dts: armada-*.dtsi: use SPDX-License-Identifier for most of the Armada SoCs
...
Diffstat (limited to 'arch')
845 files changed, 38582 insertions, 20074 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index ade7a38543dc9..7e24249578091 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -163,7 +163,10 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ exynos4210-universal_c210.dtb \ + exynos4412-i9300.dtb \ + exynos4412-i9305.dtb \ exynos4412-itop-elite.dtb \ + exynos4412-n710x.dtb \ exynos4412-odroidu3.dtb \ exynos4412-odroidx.dtb \ exynos4412-odroidx2.dtb \ @@ -304,6 +307,8 @@ dtb-$(CONFIG_ARCH_LPC18XX) += \ dtb-$(CONFIG_ARCH_LPC32XX) += \ lpc3250-ea3250.dtb \ lpc3250-phy3250.dtb +dtb-$(CONFIG_ARCH_NPCM7XX) += \ + nuvoton-npcm750-evb.dtb dtb-$(CONFIG_MACH_MESON6) += \ meson6-atv1200.dtb dtb-$(CONFIG_MACH_MESON8) += \ @@ -396,6 +401,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-icore-rqs.dtb \ imx6dl-nit6xlite.dtb \ imx6dl-nitrogen6x.dtb \ + imx6dl-phytec-mira-rdk-nand.dtb \ imx6dl-phytec-pbab01.dtb \ imx6dl-rex-basic.dtb \ imx6dl-riotboard.dtb \ @@ -435,6 +441,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-dfi-fs700-m60.dtb \ imx6q-display5-tianma-tm070-1280x768.dtb \ imx6q-dmo-edmqmx6.dtb \ + imx6q-dms-ba16.dtb \ imx6q-evi.dtb \ imx6q-gk802.dtb \ imx6q-gw51xx.dtb \ @@ -465,6 +472,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-nitrogen6_max.dtb \ imx6q-nitrogen6_som2.dtb \ imx6q-novena.dtb \ + imx6q-phytec-mira-rdk-emmc.dtb \ + imx6q-phytec-mira-rdk-nand.dtb \ imx6q-phytec-pbab01.dtb \ imx6q-pistachio.dtb \ imx6q-rex-pro.dtb \ @@ -494,6 +503,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-zii-rdu2.dtb \ imx6qp-nitrogen6_max.dtb \ imx6qp-nitrogen6_som2.dtb \ + imx6qp-phytec-mira-rdk-nand.dtb \ imx6qp-sabreauto.dtb \ imx6qp-sabresd.dtb \ imx6qp-tx6qp-8037.dtb \ @@ -526,7 +536,9 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-tx6ul-0010.dtb \ imx6ul-tx6ul-0011.dtb \ imx6ul-tx6ul-mainboard.dtb \ - imx6ull-14x14-evk.dtb + imx6ull-14x14-evk.dtb \ + imx6ull-colibri-eval-v3.dtb \ + imx6ull-colibri-wifi-eval-v3.dtb dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ imx7d-colibri-emmc-eval-v3.dtb \ @@ -673,6 +685,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-lxm.dtb \ am335x-moxa-uc-8100-me-t.dtb \ am335x-nano.dtb \ + am335x-pdu001.dtb \ am335x-pepper.dtb \ am335x-phycore-rdk.dtb \ am335x-shc.dtb \ @@ -752,6 +765,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8960-cdp.dtb \ qcom-msm8974-fairphone-fp2.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ + qcom-msm8974-samsung-klte.dtb \ qcom-msm8974-sony-xperia-castor.dtb \ qcom-msm8974-sony-xperia-honami.dtb \ qcom-mdm9615-wp8548-mangoh-green.dtb @@ -784,6 +798,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ r8a7778-bockw.dtb \ r8a7779-marzen.dtb \ r8a7790-lager.dtb \ + r8a7790-stout.dtb \ r8a7791-koelsch.dtb \ r8a7791-porter.dtb \ r8a7792-blanche.dtb \ @@ -863,7 +878,7 @@ dtb-$(CONFIG_ARCH_STI) += \ stih410-b2120.dtb \ stih410-b2260.dtb \ stih418-b2199.dtb -dtb-$(CONFIG_ARCH_STM32)+= \ +dtb-$(CONFIG_ARCH_STM32) += \ stm32f429-disco.dtb \ stm32f469-disco.dtb \ stm32f746-disco.dtb \ @@ -871,7 +886,9 @@ dtb-$(CONFIG_ARCH_STM32)+= \ stm32429i-eval.dtb \ stm32746g-eval.dtb \ stm32h743i-eval.dtb \ - stm32h743i-disco.dtb + stm32h743i-disco.dtb \ + stm32mp157c-ed1.dtb \ + stm32mp157c-ev1.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \ @@ -942,6 +959,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-m3.dtb \ sun7i-a20-mk808c.dtb \ sun7i-a20-olimex-som-evb.dtb \ + sun7i-a20-olimex-som204-evb.dtb \ + sun7i-a20-olimex-som204-evb-emmc.dtb \ sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-lime2.dtb \ sun7i-a20-olinuxino-lime2-emmc.dtb \ @@ -974,6 +993,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a83t-cubietruck-plus.dtb \ sun8i-a83t-tbs-a711.dtb \ sun8i-h2-plus-orangepi-r1.dtb \ + sun8i-h2-plus-bananapi-m2-zero.dtb \ sun8i-h2-plus-orangepi-zero.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ sun8i-h3-beelink-x2.dtb \ @@ -1022,6 +1042,7 @@ dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \ tegra114-tn7.dtb dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \ tegra124-apalis-eval.dtb \ + tegra124-apalis-v1.2-eval.dtb \ tegra124-jetson-tk1.dtb \ tegra124-nyan-big.dtb \ tegra124-nyan-blaze.dtb \ @@ -1047,6 +1068,7 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-sld8-ref.dtb dtb-$(CONFIG_ARCH_VERSATILE) += \ versatile-ab.dtb \ + versatile-ab-ib2.dtb \ versatile-pb.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += \ vexpress-v2p-ca5s.dtb \ @@ -1062,12 +1084,18 @@ dtb-$(CONFIG_ARCH_VT8500) += \ wm8750-apc8750.dtb \ wm8850-w70v2.dtb dtb-$(CONFIG_ARCH_ZYNQ) += \ + zynq-cc108.dtb \ zynq-microzed.dtb \ zynq-parallella.dtb \ zynq-zc702.dtb \ zynq-zc706.dtb \ + zynq-zc770-xm010.dtb \ + zynq-zc770-xm011.dtb \ + zynq-zc770-xm012.dtb \ + zynq-zc770-xm013.dtb \ zynq-zed.dtb \ - zynq-zybo.dtb + zynq-zybo.dtb \ + zynq-zybo-z7.dtb dtb-$(CONFIG_MACH_ARMADA_370) += \ armada-370-db.dtb \ armada-370-dlink-dns327l.dtb \ @@ -1129,6 +1157,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ + aspeed-bmc-arm-centriq2400-rep.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ aspeed-bmc-opp-witherspoon.dtb \ diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts index 3f2480d05a3ba..58baee158e64d 100644 --- a/arch/arm/boot/dts/am335x-boneblue.dts +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -342,7 +342,7 @@ }; baseboard_eeprom: baseboard_eeprom@50 { - compatible = "at,24c256"; + compatible = "atmel,24c256"; reg = <0x50>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts new file mode 100644 index 0000000000000..1ad530a39a957 --- /dev/null +++ b/arch/arm/boot/dts/am335x-pdu001.dts @@ -0,0 +1,595 @@ +/* + * pdu001.dts + * + * EETS GmbH PDU001 board device tree file + * + * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/ + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +#include "am33xx.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/leds-pca9532.h> + +/ { + model = "EETS,PDU001"; + compatible = "ti,am33xx"; + + chosen { + stdout-path = &uart3; + }; + + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + regulator-boot-on; + }; + + lis3_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "lis3_reg"; + regulator-boot-on; + }; + + panel { + compatible = "ti,tilcdc,panel"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins_s0>; + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <16>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + + display-timings { + 240x320p16 { + clock-frequency = <6500000>; + hactive = <240>; + vactive = <320>; + hfront-porch = <6>; + hback-porch = <6>; + hsync-len = <1>; + vback-porch = <6>; + vfront-porch = <6>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <1>; + de-active = <0>; + }; + }; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */ + AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_clk.i2c2_sda */ + AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d0.i2c2_scl */ + >; + }; + + spi1_pins: pinmux_spi1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_sclk */ + AM33XX_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */ + AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */ + AM33XX_IOPAD(0x99C, PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x96C, PIN_OUTPUT | MUX_MODE7) /* uart0_rtsn.gpio1_9 */ + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE1) /* spi0_cs1.uart3_rxd */ + AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */ + >; + }; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Port 1 (emac0) */ + AM33XX_IOPAD(0x908, PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */ + AM33XX_IOPAD(0x90C, PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */ + AM33XX_IOPAD(0x910, PIN_INPUT | MUX_MODE0) /* mii1_rxer.mii1_rxer */ + AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE0) /* mii1_txen.mii1_txen */ + AM33XX_IOPAD(0x918, PIN_INPUT | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + AM33XX_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + AM33XX_IOPAD(0x920, PIN_OUTPUT | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + AM33XX_IOPAD(0x92c, PIN_INPUT | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + AM33XX_IOPAD(0x930, PIN_INPUT | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + AM33XX_IOPAD(0x934, PIN_INPUT | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + AM33XX_IOPAD(0x938, PIN_INPUT | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + AM33XX_IOPAD(0x93c, PIN_INPUT | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + + /* Port 2 (emac1) */ + AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1) /* mii2_txen.gpmc_a0 */ + AM33XX_IOPAD(0x844, PIN_INPUT | MUX_MODE1) /* mii2_rxdv.gpmc_a1 */ + AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1) /* mii2_txd3.gpmc_a2 */ + AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1) /* mii2_txd2.gpmc_a3 */ + AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1) /* mii2_txd1.gpmc_a4 */ + AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1) /* mii2_txd0.gpmc_a5 */ + AM33XX_IOPAD(0x858, PIN_INPUT | MUX_MODE1) /* mii2_txclk.gpmc_a6 */ + AM33XX_IOPAD(0x85c, PIN_INPUT | MUX_MODE1) /* mii2_rxclk.gpmc_a7 */ + AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE1) /* mii2_rxd3.gpmc_a8 */ + AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE1) /* mii2_rxd2.gpmc_a9 */ + AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE1) /* mii2_rxd1.gpmc_a10 */ + AM33XX_IOPAD(0x86C, PIN_INPUT | MUX_MODE1) /* mii2_rxd0.gpmc_a11 */ + AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE1) /* mii2_crs.gpmc_wait0 */ + AM33XX_IOPAD(0x874, PIN_INPUT | MUX_MODE1) /* mii2_rxer.gpmc_wpn */ + AM33XX_IOPAD(0x878, PIN_INPUT | MUX_MODE1) /* mii2_col.gpmc_ben1 */ + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + /* eMMC */ + pinctrl-single,pins = < + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + /* SD cardcage */ + pinctrl-single,pins = < + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + /* card change signal for frontpanel SD cardcage */ + AM33XX_IOPAD(0x890, PIN_INPUT | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */ + >; + }; + + lcd_pins_s0: lcd_pins_s0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + + dcan0_pins: pinmux_dcan0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */ + AM33XX_IOPAD(0x97c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart1_rtsn.d_can0_rx */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + rts-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + rs485-rts-active-high; + rs485-rts-delay = <0 0>; + linux,rs485-enabled-at-boot-time; + + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + }; + + m2_eeprom: m2_eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + status = "okay"; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + status = "okay"; + clock-frequency = <100000>; + + board_24aa025e48: board_24aa025e48@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + + backplane_24aa025e48: backplane_24aa025e48@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + }; + + pca9532: pca9532@60 { + compatible = "nxp,pca9532"; + reg = <0x60>; + psc0 = <0x97>; + pwm0 = <0x80>; + psc1 = <0x97>; + pwm1 = <0x10>; + + run.red@0 { + type = <PCA9532_TYPE_LED>; + }; + run.green@1 { + type = <PCA9532_TYPE_LED>; + default-state = "on"; + }; + s2.red@2 { + type = <PCA9532_TYPE_LED>; + }; + s2.green@3 { + type = <PCA9532_TYPE_LED>; + }; + s1.yellow@4 { + type = <PCA9532_TYPE_LED>; + }; + s1.green@5 { + type = <PCA9532_TYPE_LED>; + }; + }; + + pca9530: pca9530@61 { + compatible = "nxp,pca9530"; + reg = <0x61>; + + tft-panel@0 { + type = <PCA9532_TYPE_LED>; + linux,default-trigger = "backlight"; + default-state = "on"; + }; + }; + + mcp79400: mcp79400@6f { + compatible = "microchip,mcp7940x"; + reg = <0x6f>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <100000>; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + ti,pindir-d0-out-d1-in; + status = "okay"; + + cfaf240320a032t { + compatible = "orisetech,otm3225a"; + reg = <0>; + spi-max-frequency = <1000000>; + // SPI mode 3 + spi-cpol; + spi-cpha; + status = "okay"; + }; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&cppi41dma { + status = "okay"; +}; + +/* + * Disable soc's rtc as we have no VBAT for it. This makes the board + * rtc (Microchip MCP79400) the default rtc device 'rtc0'. + */ +&rtc { + status = "disabled"; +}; + +&lcdc { + status = "okay"; +}; + +&elm { + status = "okay"; +}; + +#include "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-name = "ldo_vrtc"; + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-name = "buck_vdd_ddr"; + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits */ + regulator-name = "buck_vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1312500>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits */ + regulator-name = "buck_vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-name = "boost_res"; + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-name = "ldo_vdig1"; + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-name = "ldo_vdig2"; + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-name = "ldo_vpll"; + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-name = "ldo_vdac"; + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-name = "ldo_vaux1"; + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-name = "ldo_vaux2"; + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-name = "ldo_vaux33"; + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-name = "ldo_vmmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vbb_reg: regulator@13 { + regulator-name = "bat_vbb"; + }; + }; +}; + +&mac { + pinctrl-names = "default"; + pinctrl-0 = <&cpsw_default>; + dual_emac; /* no switch, two distinct MACs */ + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&davinci_mdio_default>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "mii"; + dual_emac_res_vlan = <2>; +}; + +&tscadc { + status = "okay"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordinate-readouts = <5>; + ti,wire-config = <0x01 0x10 0x22 0x33>; + ti,charge-delay = <0x400>; + }; + + adc { + ti,adc-channels = <4 5 6 7>; + }; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + non-removable; +}; + +&mmc2 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; + +&dcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dcan0_pins>; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 628c77b0b3865..9cd62bc2ca352 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -147,6 +147,8 @@ mpu { compatible = "ti,omap3-mpu"; ti,hwmods = "mpu"; + pm-sram = <&pm_sram_code + &pm_sram_data>; }; }; @@ -905,6 +907,21 @@ ocmcram: ocmcram@40300000 { compatible = "mmio-sram"; reg = <0x40300000 0x10000>; /* 64k */ + ranges = <0x0 0x40300000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + + pm_sram_code: pm-sram-code@0 { + compatible = "ti,sram"; + reg = <0x0 0x1000>; + protect-exec; + }; + + pm_sram_data: pm-sram-data@1000 { + compatible = "ti,sram"; + reg = <0x1000 0x1000>; + pool; + }; }; elm: elm@48080000 { @@ -945,6 +962,10 @@ compatible = "ti,emif-am3352"; reg = <0x4c000000 0x1000000>; ti,hwmods = "emif"; + interrupts = <101>; + sram = <&pm_sram_code + &pm_sram_data>; + ti,no-idle; }; gpmc: gpmc@50000000 { diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 964f3ef797289..f0cbd86312dce 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -92,6 +92,16 @@ }; }; + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap4-mpu"; + ti,hwmods = "mpu"; + pm-sram = <&pm_sram_code + &pm_sram_data>; + }; + }; + gic: interrupt-controller@48241000 { compatible = "arm,cortex-a9-gic"; interrupt-controller; @@ -143,6 +153,7 @@ #size-cells = <1>; ranges; ti,hwmods = "l3_main"; + ti,no-idle; reg = <0x44000000 0x400000 0x44800000 0x400000>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, @@ -237,6 +248,10 @@ compatible = "ti,emif-am4372"; reg = <0x4c000000 0x1000000>; ti,hwmods = "emif"; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + ti,no-idle; + sram = <&pm_sram_code + &pm_sram_data>; }; edma: edma@49000000 { @@ -1141,6 +1156,21 @@ ocmcram: ocmcram@40300000 { compatible = "mmio-sram"; reg = <0x40300000 0x40000>; /* 256k */ + ranges = <0x0 0x40300000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + + pm_sram_code: pm-sram-code@0 { + compatible = "ti,sram"; + reg = <0x0 0x1000>; + protect-exec; + }; + + pm_sram_data: pm-sram-data@1000 { + compatible = "ti,sram"; + reg = <0x1000 0x1000>; + pool; + }; }; dcan0: can@481cc000 { diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index c3b1a3fb5a2ee..8fe95cd7232ae 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -805,7 +805,7 @@ }; &usb1 { - dr_mode = "peripheral"; + dr_mode = "otg"; status = "okay"; }; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 3fa3b226995d3..4118802b7fea0 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -600,7 +600,7 @@ }; &usb1 { - dr_mode = "peripheral"; + dr_mode = "otg"; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&usb1_pins>; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 00c3d1de384f9..a66941885c119 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -856,7 +856,7 @@ }; &usb1 { - dr_mode = "peripheral"; + dr_mode = "otg"; status = "okay"; }; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index 6d3c83743156c..a2555140babc4 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -10,8 +10,8 @@ #include "dra72x.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> -#include "am57xx-idk-common.dtsi" #include "dra72x-mmc-iodelay.dtsi" +#include "am57xx-idk-common.dtsi" / { model = "TI AM5718 IDK"; diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index 9ab0af5017df3..3a02ed720957b 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -9,9 +9,8 @@ /dts-v1/; #include "dra74x.dtsi" -#include "am572x-idk-common.dtsi" -#include "am57xx-idk-common.dtsi" #include "dra74x-mmc-iodelay.dtsi" +#include "am572x-idk-common.dtsi" / { model = "TI AM5728 IDK"; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index ab60035bc50c8..6204a266212a2 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -442,6 +442,7 @@ pinctrl-0 = <&mmc2_pins_default>; vmmc-supply = <&vdd_3v3>; + vqmmc-supply = <&vdd_3v3>; bus-width = <8>; ti,non-removable; cap-mmc-dual-data-rate; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 97aa8e6a56da8..43cdf523a8a02 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -115,6 +115,17 @@ DRA7XX_CORE_IOPAD(0x37d4, MUX_MODE15 | PULL_UP) /* dcan1_rx.off */ >; }; + + mmc1_pins_default: mmc1_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; }; &i2c1 { @@ -410,6 +421,7 @@ &mmc2 { status = "okay"; vmmc-supply = <&v3_3d>; + vqmmc-supply = <&v3_3d>; bus-width = <8>; ti,non-removable; max-frequency = <96000000>; diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index b67a751797844..d7c8419327012 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -24,7 +24,7 @@ }; chosen { - linux,stdout-path = &usart2; + stdout-path = &usart2; }; memory { diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi index e2e9599596e25..a917cf8825ca8 100644 --- a/arch/arm/boot/dts/arm-realview-eb.dtsi +++ b/arch/arm/boot/dts/arm-realview-eb.dtsi @@ -143,6 +143,43 @@ port1-otg; }; + bridge { + compatible = "ti,ths8134a", "ti,ths8134"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_bridge_out>; + }; + }; + }; + /* These peripherals are inside the FPGA */ fpga { #address-cells = <1>; @@ -409,36 +446,15 @@ interrupt-names = "combined"; clocks = <&oscclk0>, <&pclk>; clock-names = "clcdclk", "apb_pclk"; + /* 1024x768 16bpp @65MHz works fine */ + max-memory-bandwidth = <95000000>; port { clcd_pads: endpoint { - remote-endpoint = <&clcd_panel>; + remote-endpoint = <&vga_bridge_in>; arm,pl11x,tft-r0g0b0-pads = <0 8 16>; }; }; - - panel { - compatible = "panel-dpi"; - - port { - clcd_panel: endpoint { - remote-endpoint = <&clcd_pads>; - }; - }; - - /* Standard 640x480 VGA timings */ - panel-timing { - clock-frequency = <25175000>; - hactive = <640>; - hback-porch = <48>; - hfront-porch = <16>; - hsync-len = <96>; - vactive = <480>; - vback-porch = <33>; - vfront-porch = <10>; - vsync-len = <2>; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index c789564f28033..f935b72d3d964 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -161,6 +161,43 @@ port1-otg; }; + bridge { + compatible = "ti,ths8134a", "ti,ths8134"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_bridge_out>; + }; + }; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -403,36 +440,15 @@ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; clocks = <&oscclk0>, <&pclk>; clock-names = "clcdclk", "apb_pclk"; + /* 1024x768 16bpp @65MHz works fine */ + max-memory-bandwidth = <95000000>; port { clcd_pads: endpoint { - remote-endpoint = <&clcd_panel>; + remote-endpoint = <&vga_bridge_in>; arm,pl11x,tft-r0g0b0-pads = <0 8 16>; }; }; - - panel { - compatible = "panel-dpi"; - - port { - clcd_panel: endpoint { - remote-endpoint = <&clcd_pads>; - }; - }; - - /* Standard 640x480 VGA timings */ - panel-timing { - clock-frequency = <25175000>; - hactive = <640>; - hback-porch = <48>; - hfront-porch = <16>; - hsync-len = <96>; - vactive = <480>; - vback-porch = <33>; - vfront-porch = <10>; - vsync-len = <2>; - }; - }; }; }; @@ -564,7 +580,5 @@ clocks = <&pclk>; clock-names = "apb_pclk"; }; - - }; }; diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts index 3944765ac4b06..36203288de426 100644 --- a/arch/arm/boot/dts/arm-realview-pb11mp.dts +++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts @@ -242,6 +242,49 @@ bank-width = <4>; }; + bridge { + compatible = "ti,ths8134a", "ti,ths8134"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + vga { + /* + * This DDC I2C is connected directly to the DVI portions + * of the connector, so it's not really working when the + * monitor is connected to the VGA connector. + */ + compatible = "vga-connector"; + ddc-i2c-bus = <&i2c1>; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_bridge_out>; + }; + }; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -575,6 +618,13 @@ clock-names = "apb_pclk"; }; + i2c1: i2c@10016000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,versatile-i2c"; + reg = <0x10016000 0x1000>; + }; + rtc: rtc@10017000 { compatible = "arm,pl031", "arm,primecell"; reg = <0x10017000 0x1000>; @@ -609,37 +659,15 @@ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&oscclk4>, <&pclk>; clock-names = "clcdclk", "apb_pclk"; - max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */ + /* 1024x768 16bpp @65MHz works fine */ + max-memory-bandwidth = <95000000>; port { clcd_pads: endpoint { - remote-endpoint = <&clcd_panel>; + remote-endpoint = <&vga_bridge_in>; arm,pl11x,tft-r0g0b0-pads = <0 8 16>; }; }; - - panel { - compatible = "panel-dpi"; - - port { - clcd_panel: endpoint { - remote-endpoint = <&clcd_pads>; - }; - }; - - /* Standard 640x480 VGA timings */ - panel-timing { - clock-frequency = <25175000>; - hactive = <640>; - hback-porch = <48>; - hfront-porch = <16>; - hsync-len = <96>; - vactive = <480>; - vback-porch = <33>; - vfront-porch = <10>; - vsync-len = <2>; - }; - }; }; /* diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi index aeb49c4bd773f..10868ba3277f5 100644 --- a/arch/arm/boot/dts/arm-realview-pbx.dtsi +++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi @@ -34,7 +34,8 @@ serial1 = &serial1; serial2 = &serial2; serial3 = &serial3; - i2c0 = &i2c; + i2c0 = &i2c0; + i2c1 = &i2c1; }; memory { @@ -158,6 +159,49 @@ port1-otg; }; + bridge { + compatible = "ti,ths8134a", "ti,ths8134"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + vga { + /* + * This DDC I2C is connected directly to the DVI portions + * of the connector, so it's not really working when the + * monitor is connected to the VGA connector. + */ + compatible = "vga-connector"; + ddc-i2c-bus = <&i2c1>; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_bridge_out>; + }; + }; + }; + soc: soc@0 { compatible = "arm,realview-pbx-soc", "simple-bus"; #address-cells = <1>; @@ -285,7 +329,7 @@ <&timclk>; }; - i2c: i2c@10002000 { + i2c0: i2c@10002000 { #address-cells = <1>; #size-cells = <0>; compatible = "arm,versatile-i2c"; @@ -396,7 +440,12 @@ clock-names = "apb_pclk"; }; - /* DVI serial bus control is at 10016000 */ + i2c1: i2c@10016000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,versatile-i2c"; + reg = <0x10016000 0x1000>; + }; rtc: rtc@10017000 { compatible = "arm,pl031", "arm,primecell"; @@ -506,36 +555,15 @@ interrupt-names = "combined"; clocks = <&oscclk4>, <&pclk>; clock-names = "clcdclk", "apb_pclk"; + /* 1024x768 16bpp @65MHz works fine */ + max-memory-bandwidth = <95000000>; port { clcd_pads: endpoint { - remote-endpoint = <&clcd_panel>; + remote-endpoint = <&vga_bridge_in>; arm,pl11x,tft-r0g0b0-pads = <0 8 16>; }; }; - - panel { - compatible = "panel-dpi"; - - port { - clcd_panel: endpoint { - remote-endpoint = <&clcd_pads>; - }; - }; - - /* Standard 640x480 VGA timings */ - panel-timing { - clock-frequency = <25175000>; - hactive = <640>; - hback-porch = <48>; - hfront-porch = <16>; - hsync-len = <96>; - vactive = <480>; - vback-porch = <33>; - vfront-porch = <10>; - vsync-len = <2>; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index c4eef7323367a..afe46097a4036 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Marvell Armada 370 evaluation board * (DB-88F6710-BP-DDR3) @@ -8,44 +9,6 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * * Note: this Device Tree assumes that the bootloader has remapped the * internal registers to 0xf1000000 (instead of the default * 0xd0000000). The 0xf1000000 is the default used by the recent, diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts index db7f3aa386702..8e46f63cbaa1b 100644 --- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts +++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for D-Link DNS-327L * * Copyright (C) 2015, Andrew Andrianov <andrew@ncrmnt.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /* Remaining unsolved: diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 702f58c9642d7..996f31b007294 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Globalscale Mirabox * * Gregory CLEMENT <gregory.clement@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index b1a96e95e9213..56634803e16b8 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for NETGEAR ReadyNAS 102 * * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -103,7 +66,7 @@ status = "okay"; - isl12057: isl12057@68 { + isl12057: rtc@68 { compatible = "isil,isl12057"; reg = <0x68>; wakeup-source; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index d67e7aa42b54f..16d0307f786a0 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for NETGEAR ReadyNAS 104 * * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -105,7 +68,7 @@ status = "okay"; - isl12057: isl12057@68 { + isl12057: rtc@68 { compatible = "isil,isl12057"; reg = <0x68>; wakeup-source; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index c28afb2423938..cc2f774eb2671 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Marvell Armada 370 Reference Design board * (RD-88F6710-A1) @@ -6,44 +7,6 @@ * * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * * Note: this Device Tree assumes that the bootloader has remapped the * internal registers to 0xf1000000 (instead of the default * 0xd0000000). The 0xf1000000 is the default used by the recent, diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts index fef0110a8d8a3..8dd242e668e65 100644 --- a/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts +++ b/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree file for Seagate NAS 2-Bay (Armada 370 SoC). * * Copyright (C) 2015 Seagate * * Author: Vincent Donnefort <vdonnefort@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts index eb6af53b49541..3cf70c72c5ca3 100644 --- a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts +++ b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree file for Seagate NAS 4-Bay (Armada 370 SoC). * * Copyright (C) 2015 Seagate * * Author: Vincent Donnefort <vdonnefort@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi index e9a5b952afc08..a5206db0ebbda 100644 --- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi +++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree common file for the Seagate NAS 2 and 4-bay (Armada 370 SoC). * * Copyright (C) 2015 Seagate * * Author: Vincent Donnefort <vdonnefort@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts index 3c91f9821c89f..5ee572dc92423 100644 --- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree file for Seagate Personal Cloud NAS 2-Bay (Armada 370 SoC). * * Copyright (C) 2015 Seagate * * Author: Simon Guinot <simon.guinot@sequanux.org> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts index aad39e97af43a..578b54b39c8f0 100644 --- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree file for Seagate Personal Cloud NAS (Armada 370 SoC). * * Copyright (C) 2015 Seagate * * Author: Simon Guinot <simon.guinot@sequanux.org> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi index d079a89ee5a29..a624b2371fb6a 100644 --- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree common file for the Seagate Personal Cloud NAS 1 and 2-Bay * (Armada 370 SoC). @@ -5,10 +6,6 @@ * Copyright (C) 2015 Seagate * * Author: Simon Guinot <simon.guinot@sequanux.org> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /* diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index 95040810c0949..64f2ce254fb6c 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Synology DS213j * * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * * Note: this Device Tree assumes that the bootloader has remapped the * internal registers to 0xf1000000 (instead of the old 0xd0000000). * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 09495e87b038b..11fc3271dad48 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 370 and Armada XP SoC * @@ -8,44 +9,6 @@ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Ben Dooks <ben.dooks@codethink.co.uk> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * * This file contains the definitions that are common to the Armada * 370 and Armada XP SoC. */ diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index b1cf5a26f3c2a..46e6d3ed8f35a 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 370 family SoC * @@ -7,44 +8,6 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * * Contains definitions specific to the Armada 370 SoC that are not * common to all Armada SoCs. */ diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index bcdbb8ba1d65f..e4ecd7e756446 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Marvell Armada 375 evaluation board * (DB-88F6720) @@ -6,44 +7,6 @@ * * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 2cb1bcd309760..53ead6f26a0e6 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 375 family SoC * @@ -5,44 +6,6 @@ * * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index 132596fd08603..cff1269f3fbfd 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 380 SoC. * @@ -6,44 +7,6 @@ * Lior Amsalem <alior@marvell.com> * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "armada-38x.dtsi" diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index 678aa023335d8..d294f24281a51 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Device Tree file for Marvell Armada 385 Access Point Development board * (DB-88F6820-AP) @@ -5,38 +6,6 @@ * Copyright (C) 2014 Marvell * * Nadav Haklai <nadavh@marvell.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts index ee669ae61011f..1f30993af405e 100644 --- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts +++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts @@ -1,40 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Device Tree include for the Linksys WRT1200AC (Caiman) * * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org> - * - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts index 5169ca89c55ac..bc34802ce6bc4 100644 --- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts +++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts @@ -1,40 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Device Tree file for the Linksys WRT1900ACv2 (Cobra) * * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org> - * - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-385-linksys-rango.dts b/arch/arm/boot/dts/armada-385-linksys-rango.dts index da8a0f3d432be..5b745a0ccce51 100644 --- a/arch/arm/boot/dts/armada-385-linksys-rango.dts +++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts @@ -1,40 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Device Tree file for the Linksys WRT3200ACM (Rango) * * Copyright (C) 2016 Imre Kaloz <kaloz@openwrt.org> - * - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts index 94aa35bc0bffd..44f5aeb5fc33e 100644 --- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts +++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts @@ -1,40 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Device Tree file for the Linksys WRT1900ACS (Shelby) * * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org> - * - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 434dc9aaa5e4e..4a0d7360110b1 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -1,40 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Device Tree include file for Armada 385 based Linksys boards * * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org> - * - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -282,3 +250,8 @@ status = "okay"; usb-phy = <&usb3_1_phy>; }; + +&rtc { + /* No crystal connected to the internal RTC */ + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts index 0a3552ebda3b8..6782ce481ac96 100644 --- a/arch/arm/boot/dts/armada-385-synology-ds116.dts +++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts @@ -1,39 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Device Tree file for Synology DS116 NAS * * Copyright (C) 2017 Willy Tarreau <w@1wt.eu> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index 06831e1e3f808..768b6c5d2129a 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -1,43 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Device Tree file for the Turris Omnia * * Copyright (C) 2016 Uwe Kleine-König <uwe@kleine-koenig.org> * Copyright (C) 2016 Tomas Hlavacek <tmshlvkc@gmail.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf */ diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index 74863aff01c6e..f0022d10c7159 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 385 SoC. * @@ -6,44 +7,6 @@ * Lior Amsalem <alior@marvell.com> * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "armada-38x.dtsi" diff --git a/arch/arm/boot/dts/armada-388-clearfog-base.dts b/arch/arm/boot/dts/armada-388-clearfog-base.dts index 22ed07fc29796..50ed4ae5c621a 100644 --- a/arch/arm/boot/dts/armada-388-clearfog-base.dts +++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Device Tree file for SolidRun Clearfog Base revision A1 rev 2.0 (88F6828) * @@ -7,43 +8,6 @@ * the A1 rev 2.0 of the board, which does not represent final * production board. Things will change, don't expect this file to * remain compatible info the future. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-388-clearfog-pro.dts b/arch/arm/boot/dts/armada-388-clearfog-pro.dts index bd85870bbdbb6..24e4b5a509be9 100644 --- a/arch/arm/boot/dts/armada-388-clearfog-pro.dts +++ b/arch/arm/boot/dts/armada-388-clearfog-pro.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828) * @@ -7,43 +8,6 @@ * the A1 rev 2.0 of the board, which does not represent final * production board. Things will change, don't expect this file to * remain compatible info the future. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "armada-388-clearfog.dts" diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index ee7b0089eff03..5fd0f6f61e776 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828) * @@ -7,43 +8,6 @@ * the A1 rev 2.0 of the board, which does not represent final * production board. Things will change, don't expect this file to * remain compatible info the future. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi index 68acfc9687069..0d9dfdfe977e2 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dtsi +++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Device Tree include file for SolidRun Clearfog 88F6828 based boards * @@ -7,43 +8,6 @@ * the A1 rev 2.0 of the board, which does not represent final * production board. Things will change, don't expect this file to * remain compatible info the future. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "armada-388.dtsi" @@ -117,6 +81,16 @@ }; }; }; + + sfp: sfp { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <2000>; + }; }; ð1 { @@ -133,18 +107,14 @@ bm,pool-long = <3>; bm,pool-short = <1>; buffer-manager = <&bm>; + managed = "in-band-status"; phy-mode = "sgmii"; + sfp = <&sfp>; status = "okay"; - - fixed-link { - speed = <1000>; - full-duplex; - }; }; &i2c0 { - /* Is there anything on this? */ - clock-frequency = <100000>; + clock-frequency = <400000>; pinctrl-0 = <&i2c0_pins>; pinctrl-names = "default"; status = "okay"; @@ -209,43 +179,13 @@ output-low; line-name = "m.2 devslp"; }; - sfp_los { - /* SFP loss of signal */ - gpio-hog; - gpios = <12 GPIO_ACTIVE_HIGH>; - input; - line-name = "sfp-los"; - }; - sfp_tx_fault { - /* SFP laser fault */ - gpio-hog; - gpios = <13 GPIO_ACTIVE_HIGH>; - input; - line-name = "sfp-tx-fault"; - }; - sfp_tx_disable { - /* SFP transmit disable */ - gpio-hog; - gpios = <14 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "sfp-tx-disable"; - }; - sfp_mod_def0 { - /* SFP module present */ - gpio-hog; - gpios = <15 GPIO_ACTIVE_LOW>; - input; - line-name = "sfp-mod-def0"; - }; }; - /* The MCP3021 is 100kHz clock only */ + /* The MCP3021 supports standard and fast modes */ mikrobus_adc: mcp3021@4c { compatible = "microchip,mcp3021"; reg = <0x4c>; }; - - /* Also something at 0x64 */ }; &i2c1 { diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index a4ec1fa375297..05250d426dc40 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Marvell Armada 388 evaluation board * (DB-88F6820) @@ -5,44 +6,6 @@ * Copyright (C) 2014 Marvell * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index 51b4ee6df1301..9d873257ac458 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Device Tree file for Marvell Armada 385 development board * (RD-88F6820-GP) @@ -5,38 +6,6 @@ * Copyright (C) 2014 Marvell * * Gregory CLEMENT <gregory.clement@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts index 9cc3ca0376b93..328a4d6afd2cd 100644 --- a/arch/arm/boot/dts/armada-388-rd.dts +++ b/arch/arm/boot/dts/armada-388-rd.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Marvell Armada 388 Reference Design board * (RD-88F6820-AP) @@ -6,44 +7,6 @@ * * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-388.dtsi b/arch/arm/boot/dts/armada-388.dtsi index 1c0d151b2aaa6..f3a020ff577e3 100644 --- a/arch/arm/boot/dts/armada-388.dtsi +++ b/arch/arm/boot/dts/armada-388.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 388 SoC. * @@ -5,39 +6,6 @@ * * Gregory CLEMENT <gregory.clement@free-electrons.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * - * * The main difference with the Armada 385 is that the 388 can handle two more * SATA ports. So we can reuse the dtsi of the Armada 385, override the pinctrl * property and the name of the SoC, and add the second SATA host which control diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi index 9b508a8161f53..2d1cea131e71c 100644 --- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi +++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Device Tree file for SolidRun Armada 38x Microsom * @@ -7,43 +8,6 @@ * the A1 rev 2.0 of the board, which does not represent final * production board. Things will change, don't expect this file to * remain compatible info the future. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index a6cc568f74f7b..4cc09e43eea22 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 38x family of SoCs. * @@ -6,44 +7,6 @@ * Lior Amsalem <alior@marvell.com> * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts index c718a5242595f..1b2362e4c8311 100644 --- a/arch/arm/boot/dts/armada-390-db.dts +++ b/arch/arm/boot/dts/armada-390-db.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Marvell Armada 390 Development Board * (DB-88F6920) @@ -5,44 +6,6 @@ * Copyright (C) 2016 Marvell * * Grzegorz Jaszczyk <jaz@semihalf.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-390.dtsi b/arch/arm/boot/dts/armada-390.dtsi index 0d8a54ad007cc..aa2057d4d6f81 100644 --- a/arch/arm/boot/dts/armada-390.dtsi +++ b/arch/arm/boot/dts/armada-390.dtsi @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 390 SoC. * * Copyright (C) 2015 Marvell * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "armada-39x.dtsi" diff --git a/arch/arm/boot/dts/armada-395-gp.dts b/arch/arm/boot/dts/armada-395-gp.dts index ef491b524fd6c..2a9de192b423b 100644 --- a/arch/arm/boot/dts/armada-395-gp.dts +++ b/arch/arm/boot/dts/armada-395-gp.dts @@ -1,41 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Device Tree file for Marvell Armada 395 GP board * * Copyright (C) 2016 Marvell * * Grzegorz Jaszczyk <jaz@semihalf.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-395.dtsi b/arch/arm/boot/dts/armada-395.dtsi index bf7e4335e36a6..e18a7d9cd7d43 100644 --- a/arch/arm/boot/dts/armada-395.dtsi +++ b/arch/arm/boot/dts/armada-395.dtsi @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 395 SoC. * * Copyright (C) 2016 Marvell * * Grzegorz Jaszczyk <jaz@semihalf.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "armada-39x.dtsi" diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts index f0e0379f76192..2337f24784f73 100644 --- a/arch/arm/boot/dts/armada-398-db.dts +++ b/arch/arm/boot/dts/armada-398-db.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 398 Development Board * * Copyright (C) 2015 Marvell * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-398.dtsi b/arch/arm/boot/dts/armada-398.dtsi index 1f4e113fc8212..c5ac89399ce14 100644 --- a/arch/arm/boot/dts/armada-398.dtsi +++ b/arch/arm/boot/dts/armada-398.dtsi @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 398 SoC. * * Copyright (C) 2015 Marvell * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "armada-395.dtsi" diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index 5218bd2a248d0..c1737c0a83253 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 39x family of SoCs. * * Copyright (C) 2015 Marvell * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi index bdd4c7a45fbf4..a5da44fb35ed0 100644 --- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell 98dx3236 family SoC * * Copyright (C) 2016 Allied Telesis Labs * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * * Contains definitions specific to the 98dx3236 SoC that are not * common to all Armada XP SoCs. */ diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi index a0d81bd7312be..2f5fc67dd6dcc 100644 --- a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell 98dx3336 family SoC * * Copyright (C) 2016 Allied Telesis Labs * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * * Contains definitions specific to the 98dx3236 SoC that are not * common to all Armada XP SoCs. */ diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi index bc9f824020ebe..7a9e8839880b0 100644 --- a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi +++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell 98dx4521 family SoC * * Copyright (C) 2016 Allied Telesis Labs * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * * Contains definitions specific to the 98dx4521 SoC that are not * common to all Armada XP SoCs. */ diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index d0c6a01f48a6a..606fd3476a59c 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Marvell RD-AXPWiFiAP. * @@ -9,44 +10,6 @@ * Copyright (C) 2013 Marvell * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts index 1b1ff17fdd9cf..4c64923f1c524 100644 --- a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts +++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for DB-DXBC2 board * @@ -5,44 +6,6 @@ * * Based on armada-xp-db.dts * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * * Note: this Device Tree assumes that the bootloader has remapped the * internal registers to 0xf1000000 (instead of the default * 0xd0000000). The 0xf1000000 is the default used by the recent, diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts index 06fce35d7491c..a0ebb52683f17 100644 --- a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts +++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for DB-XC3-24G4XG board * @@ -5,44 +6,6 @@ * * Based on armada-xp-db.dts * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * * Note: this Device Tree assumes that the bootloader has remapped the * internal registers to 0xf1000000 (instead of the default * 0xd0000000). The 0xf1000000 is the default used by the recent, diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 065282c217897..73d3f5cb9828b 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Marvell Armada XP evaluation board * (DB-78460-BP) @@ -8,43 +9,6 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. * * Note: this Device Tree assumes that the bootloader has remapped the * internal registers to 0xf1000000 (instead of the default diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index ac9eab8ac186c..c143556bbb7b0 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Marvell Armada XP development board * (DB-MV784MP-GP) @@ -8,44 +9,6 @@ * Gregory CLEMENT <gregory.clement@free-electrons.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * * Note: this Device Tree assumes that the bootloader has remapped the * internal registers to 0xf1000000 (instead of the default * 0xd0000000). The 0xf1000000 is the default used by the recent, diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index ce0afba1ce580..def62e9e835b7 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Lenovo Iomega ix4-300d * * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index 6d705f5182548..f8b60d9378184 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Device Tree file for the Linksys WRT1900AC (Mamba). * @@ -13,38 +14,6 @@ * Copyright (C) 2013 Marvell * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts index 977f6b3fc1f80..1395cea12759a 100644 --- a/arch/arm/boot/dts/armada-xp-matrix.dts +++ b/arch/arm/boot/dts/armada-xp-matrix.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Marvell Armada XP Matrix board * * Copyright (C) 2013 Marvell * * Lior Amsalem <alior@marvell.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 129738f7973d4..8558bf6bb54c6 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada XP family SoC * @@ -5,44 +6,6 @@ * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * * Contains definitions specific to the Armada XP MV78230 SoC that are not * common to all Armada XP SoCs. */ diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index e58d597e37b98..2d85fe8ac3272 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada XP family SoC * @@ -5,44 +6,6 @@ * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * * Contains definitions specific to the Armada XP MV78260 SoC that are not * common to all Armada XP SoCs. */ diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index a5c961cee7de3..230a3fd36b304 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada XP family SoC * @@ -5,44 +6,6 @@ * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * * Contains definitions specific to the Armada XP MV78460 SoC that are not * common to all Armada XP SoCs. */ diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index 40c6fe21e720c..c350b1cf5201f 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for NETGEAR ReadyNAS 2120 * * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -115,7 +78,7 @@ reg = <0x4c>; }; - isl12057: isl12057@68 { + isl12057: rtc@68 { compatible = "isil,isl12057"; reg = <0x68>; wakeup-source; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 66b78131a038b..0efcc166dabf6 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for OpenBlocks AX3-4 board * * Copyright (C) 2012 Marvell * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index d7228a5461c82..809e821d7399d 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Synology DS414 * * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * * Note: this Device Tree assumes that the bootloader has remapped the * internal registers to 0xf1000000 (instead of the old 0xd0000000). * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index fa1e881266ac7..ee15c77d36899 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada XP family SoC * @@ -8,44 +9,6 @@ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Ben Dooks <ben.dooks@codethink.co.uk> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * * Contains definitions specific to the Armada XP SoC that are not * common to all Armada SoCs. */ diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/artpec6-devboard.dts index 9dfe845694cff..d20d95359b284 100644 --- a/arch/arm/boot/dts/artpec6-devboard.dts +++ b/arch/arm/boot/dts/artpec6-devboard.dts @@ -26,7 +26,7 @@ memory { device_type = "memory"; - reg = <0x0 0x10000000>; + reg = <0x0 0x40000000>; }; }; @@ -59,6 +59,7 @@ mdio { #address-cells = <0x1>; #size-cells = <0x0>; + compatible = "snps,dwmac-mdio"; phy1: phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; device_type = "ethernet-phy"; diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi index 2ed11773048d2..3e4115c2cd757 100644 --- a/arch/arm/boot/dts/artpec6.dtsi +++ b/arch/arm/boot/dts/artpec6.dtsi @@ -41,6 +41,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/dma/nbpfaxi.h> #include <dt-bindings/clock/axis,artpec6-clkctrl.h> #include "skeleton.dtsi" @@ -98,7 +99,7 @@ clock-frequency = <125000000>; }; - clkctrl: clkctrl@0xf8000000 { + clkctrl: clkctrl@f8000000 { #clock-cells = <1>; compatible = "axis,artpec6-clkctrl"; reg = <0xf8000000 0x48>; @@ -153,6 +154,10 @@ interrupt-affinity = <&cpu0>, <&cpu1>; }; + /* + * Both pci nodes cannot be enabled at the same time, + * leave the unwanted node as disabled. + */ pcie: pcie@f8050000 { compatible = "axis,artpec6-pcie", "snps,dw-pcie"; reg = <0xf8050000 0x2000 @@ -180,28 +185,146 @@ status = "disabled"; }; + pcie_ep: pcie_ep@f8050000 { + compatible = "axis,artpec6-pcie-ep", "snps,dw-pcie"; + reg = <0xf8050000 0x2000 + 0xf8051000 0x2000 + 0xf8040000 0x1000 + 0xc0000000 0x20000000>; + reg-names = "dbi", "dbi2", "phy", "addr_space"; + num-ib-windows = <6>; + num-ob-windows = <2>; + num-lanes = <2>; + axis,syscon-pcie = <&syscon>; + status = "disabled"; + }; + + pinctrl: pinctrl@f801d000 { + compatible = "axis,artpec6-pinctrl"; + reg = <0xf801d000 0x400>; + + pinctrl_uart0: uart0grp { + function = "uart0"; + groups = "uart0grp2"; + bias-pull-up; + }; + pinctrl_uart1: uart1grp { + function = "uart1"; + groups = "uart1grp0"; + bias-pull-up; + }; + pinctrl_uart2: uart2grp { + function = "uart2"; + groups = "uart2grp1"; + bias-pull-up; + }; + pinctrl_uart3: uart3grp { + function = "uart3"; + groups = "uart3grp0"; + bias-pull-up; + }; + }; + amba@0 { compatible = "simple-bus"; #address-cells = <0x1>; #size-cells = <0x1>; ranges; - dma-ranges = <0x80000000 0x00000000 0x40000000>; - dma-coherent; + dma-ranges; + + crypto@f4264000 { + compatible = "axis,artpec6-crypto"; + reg = <0xf4264000 0x4000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + }; + + dma0: dma@f8019000 { + compatible = "renesas,nbpfaxi64dmac8b16"; + reg = <0xf8019000 0x400>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* error */ + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch12", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&clkctrl ARTPEC6_CLK_DMA_ACLK>; + #dma-cells = <2>; + dma-channels = <8>; + dma-requests = <8>; + }; + dma1: dma@f8019400 { + compatible = "renesas,nbpfaxi64dmac8b16"; + reg = <0xf8019400 0x400>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* error */ + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch12", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&clkctrl ARTPEC6_CLK_DMA_ACLK>; + #dma-cells = <2>; + dma-channels = <8>; + dma-requests = <8>; + }; ethernet: ethernet@f8010000 { - clock-names = "phy_ref_clk", "apb_pclk"; - clocks = <ð_phy_ref_clk>, - <&clkctrl ARTPEC6_CLK_ETH_ACLK>; - compatible = "snps,dwc-qos-ethernet-4.10"; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "stmmaceth", "ptp_ref"; + clocks = <&clkctrl ARTPEC6_CLK_ETH_ACLK>, + <&clkctrl ARTPEC6_CLK_PTP_REF>; + compatible = "snps,dwmac-4.10a", "snps,dwmac"; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi"; reg = <0xf8010000 0x4000>; - snps,write-requests = <2>; - snps,read-requests = <16>; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + snps,txpbl = <8>; snps,rxpbl = <2>; + snps,aal; + snps,tso; status = "disabled"; + + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <1>; + snps,rd_osr_lmt = <15>; + /* If FB is disabled, the AXI master chooses + * a burst length of any value less than the + * maximum enabled burst length + * (all lesser burst length enables are redundant). + */ + snps,blen = <0 0 0 0 16 0 0>; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + queue0 {}; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <2>; + queue0 {}; + queue1 {}; + }; }; uart0: serial@f8036000 { @@ -211,6 +334,11 @@ clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>, <&clkctrl ARTPEC6_CLK_UART_PCLK>; clock-names = "uart_clk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + dmas = <&dma0 4 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>, + <&dma0 5 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>; + dma-names = "rx", "tx"; status = "disabled"; }; uart1: serial@f8037000 { @@ -220,6 +348,11 @@ clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>, <&clkctrl ARTPEC6_CLK_UART_PCLK>; clock-names = "uart_clk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + dmas = <&dma0 6 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>, + <&dma0 7 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>; + dma-names = "rx", "tx"; status = "disabled"; }; uart2: serial@f8038000 { @@ -229,6 +362,11 @@ clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>, <&clkctrl ARTPEC6_CLK_UART_PCLK>; clock-names = "uart_clk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + dmas = <&dma1 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>, + <&dma1 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>; + dma-names = "rx", "tx"; status = "disabled"; }; uart3: serial@f8039000 { @@ -238,6 +376,11 @@ clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>, <&clkctrl ARTPEC6_CLK_UART_PCLK>; clock-names = "uart_clk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + dmas = <&dma1 2 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>, + <&dma1 3 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>; + dma-names = "rx", "tx"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts b/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts new file mode 100644 index 0000000000000..df1227613d48e --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Qualcomm Centriq 2400 REP AST2520"; + compatible = "qualcomm,centriq2400-rep-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory { + reg = <0x80000000 0x40000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 7>; + }; + + leds { + compatible = "gpio-leds"; + + uid_led { + label = "UID_LED"; + gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>; + }; + + ras_error_led { + label = "RAS_ERROR_LED"; + gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>; + }; + + system_fault { + label = "System_fault"; + gpios = <&gpio ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>; + }; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + flash@0 { + status = "okay"; + }; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2ck_default + &pinctrl_spi2miso_default + &pinctrl_spi2mosi_default + &pinctrl_spi2cs0_default>; +}; + +&uart3 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>; + current-speed = <115200>; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + tmp421@1e { + compatible = "ti,tmp421"; + reg = <0x1e>; + }; + tmp421@2a { + compatible = "ti,tmp421"; + reg = <0x2a>; + }; + tmp421@4e { + compatible = "ti,tmp421"; + reg = <0x4e>; + }; + tmp421@1c { + compatible = "ti,tmp421"; + reg = <0x1c>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + + tmp421@1d { + compatible = "ti,tmp421"; + reg = <0x1d>; + }; + tmp421@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + tmp421@4d { + compatible = "ti,tmp421"; + reg = <0x4d>; + }; + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + nvt210@4c { + compatible = "nvt210"; + reg = <0x4c>; + }; + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + pagesize = <128>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; + + pca9641@70 { + compatible = "nxp,pca9641"; + reg = <0x70>; + i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + tmp421@1d { + compatible = "tmp421"; + reg = <0x1d>; + }; + adm1278@12 { + compatible = "adi,adm1278"; + reg = <0x12>; + Rsense = <500>; + }; + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + ds1100@58 { + compatible = "ds1100"; + reg = <0x58>; + }; + }; + }; +}; + +&i2c9 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&gpio { + pin_gpio_c7 { + gpio-hog; + gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>; + output; + line-name = "BIOS_SPI_MUX_S"; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts index 4379d09a261f7..c7084a819dc69 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts @@ -2,6 +2,7 @@ /dts-v1/; #include "aspeed-g4.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> / { model = "Palmetto BMC"; @@ -26,6 +27,32 @@ reg = <0x5f000000 0x01000000>; /* 16M */ }; }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>; + }; + + power { + gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>; + }; + + identify { + gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(P, 5)>; + }; + }; }; &fmc { @@ -40,6 +67,9 @@ &spi { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1debug_default>; + flash@0 { status = "okay"; m25p,fast-read; @@ -47,6 +77,29 @@ }; }; +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flbusy_default &pinctrl_flwp_default + + &pinctrl_vgahs_default &pinctrl_vgavs_default + &pinctrl_ddcclk_default &pinctrl_ddcdat_default>; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + &uart5 { status = "okay"; }; @@ -111,3 +164,156 @@ &vuart { status = "okay"; }; + +&ibt { + status = "okay"; +}; + +&gpio { + pin_func_mode0 { + gpio-hog; + gpios = <ASPEED_GPIO(C, 4) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "func_mode0"; + }; + + pin_func_mode1 { + gpio-hog; + gpios = <ASPEED_GPIO(C, 5) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "func_mode1"; + }; + + pin_func_mode2 { + gpio-hog; + gpios = <ASPEED_GPIO(C, 6) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "func_mode2"; + }; + + pin_gpio_a0 { + gpio-hog; + gpios = <ASPEED_GPIO(A, 0) GPIO_ACTIVE_HIGH>; + input; + line-name = "BMC_FAN_RESERVED_N"; + }; + + pin_gpio_a1 { + gpio-hog; + gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "APSS_WDT_N"; + }; + + pin_gpio_b1 { + gpio-hog; + gpios = <ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "APSS_BOOT_MODE"; + }; + + pin_gpio_b2 { + gpio-hog; + gpios = <ASPEED_GPIO(B, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "APSS_RESET_N"; + }; + + pin_gpio_b7 { + gpio-hog; + gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "SPIVID_STBY_RESET_N"; + }; + + pin_gpio_d1 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_POWER_UP"; + }; + + pin_gpio_f1 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>; + input; + line-name = "BMC_BATTERY_TEST"; + }; + + pin_gpio_f4 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>; + input; + line-name = "AST_HW_FAULT_N"; + }; + + pin_gpio_f5 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>; + input; + line-name = "AST_SYS_FAULT_N"; + }; + + pin_gpio_f7 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 7) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_FULL_SPEED_N"; + }; + + pin_gpio_g3 { + gpio-hog; + gpios = <ASPEED_GPIO(G, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_FAN_ERROR_N"; + }; + + pin_gpio_g4 { + gpio-hog; + gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>; + input; + line-name = "BMC_WDT_RST1_P"; + }; + + pin_gpio_g5 { + gpio-hog; + gpios = <ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>; + input; + line-name = "BMC_WDT_RST2_P"; + }; + + pin_gpio_h0 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>; + input; + line-name = "PE_SLOT_TEST_EN_N"; + }; + + pin_gpio_h1 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>; + input; + line-name = "BMC_RTCRST_N"; + }; + + pin_gpio_h2 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "SYS_PWROK_BMC"; + }; + + pin_gpio_h6 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "SCM1_FSI0_DATA_EN"; + }; + + pin_gpio_h7 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_TPM_INT_N"; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 623b6ab420212..51bc6a2e9dd57 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -184,9 +184,9 @@ &i2c12 { status = "okay"; - max31785@52 { - compatible = "maxim,max31785"; - reg = <0x52>; + w83773g@4c { + compatible = "nuvoton,w83773g"; + reg = <0x4c>; }; }; @@ -203,6 +203,12 @@ output-low; line-name = "nic_func_mode1"; }; + seq_cont { + gpio-hog; + gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "seq_cont"; + }; }; &vuart { @@ -257,3 +263,7 @@ aspeed,fan-tach-ch = /bits/ 8 <0x0e>; }; }; + +&ibt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts index 5f9049d2c4c36..7056231cbee65 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts @@ -546,3 +546,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdtrst1_default>; }; + +&ibt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts index c881484a85cf4..ebe726a0d3116 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts @@ -424,3 +424,7 @@ aspeed,fan-tach-ch = /bits/ 8 <0x03>; }; }; + +&ibt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index ae2b8c952e80d..518d2bc7c7fca 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -167,6 +167,7 @@ reg-shift = <2>; interrupts = <9>; clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>; + resets = <&lpc_reset 4>; no-loopback-test; status = "disabled"; }; @@ -238,6 +239,7 @@ lpc_ctrl: lpc-ctrl@0 { compatible = "aspeed,ast2400-lpc-ctrl"; reg = <0x0 0x80>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; status = "disabled"; }; @@ -252,6 +254,19 @@ compatible = "aspeed,ast2400-lhc"; reg = <0x20 0x24 0x48 0x8>; }; + + lpc_reset: reset-controller@18 { + compatible = "aspeed,ast2400-lpc-reset"; + reg = <0x18 0x4>; + #reset-cells = <1>; + }; + + ibt: ibt@c0 { + compatible = "aspeed,ast2400-ibt-bmc"; + reg = <0xc0 0x18>; + interrupts = <8>; + status = "disabled"; + }; }; }; @@ -261,6 +276,7 @@ reg-shift = <2>; interrupts = <32>; clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>; + resets = <&lpc_reset 5>; no-loopback-test; status = "disabled"; }; @@ -271,6 +287,7 @@ reg-shift = <2>; interrupts = <33>; clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>; + resets = <&lpc_reset 6>; no-loopback-test; status = "disabled"; }; @@ -281,6 +298,7 @@ reg-shift = <2>; interrupts = <34>; clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>; + resets = <&lpc_reset 7>; no-loopback-test; status = "disabled"; }; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 2477ebc11d9db..f9917717dd088 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -210,6 +210,7 @@ reg-shift = <2>; interrupts = <9>; clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>; + resets = <&lpc_reset 4>; no-loopback-test; status = "disabled"; }; @@ -269,7 +270,7 @@ #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x1e789000 0x1000>; + ranges = <0x0 0x1e789000 0x1000>; lpc_bmc: lpc-bmc@0 { compatible = "aspeed,ast2500-lpc-bmc"; @@ -279,16 +280,16 @@ lpc_host: lpc-host@80 { compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; reg = <0x80 0x1e0>; + reg-io-width = <4>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x80 0x1e0>; - - reg-io-width = <4>; + ranges = <0x0 0x80 0x1e0>; lpc_ctrl: lpc-ctrl@0 { compatible = "aspeed,ast2500-lpc-ctrl"; reg = <0x0 0x80>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; status = "disabled"; }; @@ -303,6 +304,19 @@ compatible = "aspeed,ast2500-lhc"; reg = <0x20 0x24 0x48 0x8>; }; + + lpc_reset: reset-controller@18 { + compatible = "aspeed,ast2500-lpc-reset"; + reg = <0x18 0x4>; + #reset-cells = <1>; + }; + + ibt: ibt@c0 { + compatible = "aspeed,ast2500-ibt-bmc"; + reg = <0xc0 0x18>; + interrupts = <8>; + status = "disabled"; + }; }; }; @@ -312,6 +326,7 @@ reg-shift = <2>; interrupts = <32>; clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>; + resets = <&lpc_reset 5>; no-loopback-test; status = "disabled"; }; @@ -322,6 +337,7 @@ reg-shift = <2>; interrupts = <33>; clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>; + resets = <&lpc_reset 6>; no-loopback-test; status = "disabled"; }; @@ -332,6 +348,7 @@ reg-shift = <2>; interrupts = <34>; clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>; + resets = <&lpc_reset 7>; no-loopback-test; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts index 3ea1d26e1c684..af9f38456d04e 100644 --- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts +++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts @@ -109,7 +109,32 @@ port { panel_input: endpoint { - remote-endpoint = <&hlcdc_panel_output>; + remote-endpoint = <&lvds_encoder_output>; + }; + }; + }; + + lvds-encoder { + compatible = "lvds-encoder"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_encoder_input: endpoint { + remote-endpoint = <&hlcdc_output>; + }; + }; + + port@1 { + reg = <1>; + + lvds_encoder_output: endpoint { + remote-endpoint = <&panel_input>; + }; }; }; }; @@ -146,7 +171,7 @@ }; eeprom@50 { - compatible = "nxp,24c02"; + compatible = "nxp,se97b", "atmel,24c02"; reg = <0x50>; pagesize = <16>; }; @@ -176,8 +201,8 @@ &pinctrl_lcd_hipow0>; port@0 { - hlcdc_panel_output: endpoint { - remote-endpoint = <&panel_input>; + hlcdc_output: endpoint { + remote-endpoint = <&lvds_encoder_input>; }; }; }; @@ -216,29 +241,34 @@ reg = <0x0 0x40000>; }; - bootloader@40000 { - label = "bootloader"; - reg = <0x40000 0x80000>; + barebox@40000 { + label = "barebox"; + reg = <0x40000 0x60000>; + }; + + bareboxenv@c0000 { + label = "bareboxenv"; + reg = <0xc0000 0x40000>; }; - bootloaderenv@c0000 { - label = "bootloader env"; - reg = <0xc0000 0xc0000>; + bareboxenv2@100000 { + label = "bareboxenv2"; + reg = <0x100000 0x40000>; }; - dtb@180000 { - label = "device tree"; - reg = <0x180000 0x80000>; + oftree@180000 { + label = "oftree"; + reg = <0x180000 0x20000>; }; kernel@200000 { label = "kernel"; - reg = <0x200000 0x600000>; + reg = <0x200000 0x500000>; }; rootfs@800000 { label = "rootfs"; - reg = <0x800000 0x0f800000>; + reg = <0x800000 0x1f800000>; }; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts index e603a267bdf1d..b10dccd0958f3 100644 --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts @@ -230,7 +230,7 @@ status = "okay"; at24@50 { - compatible = "24c02"; + compatible = "atmel,24c02"; reg = <0x50>; pagesize = <8>; }; diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts index 9b82cc8843e1a..2fbec69d9cd68 100644 --- a/arch/arm/boot/dts/at91-tse850-3.dts +++ b/arch/arm/boot/dts/at91-tse850-3.dts @@ -234,6 +234,7 @@ compatible = "ti,pcm5142"; reg = <0x4c>; + #sound-dai-cells = <0>; AVDD-supply = <®_3v3>; DVDD-supply = <®_3v3>; @@ -246,7 +247,7 @@ }; eeprom@50 { - compatible = "nxp,24c02", "atmel,24c02"; + compatible = "nxp,se97b", "atmel,24c02"; reg = <0x50>; pagesize = <16>; }; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index ba61893a02a0c..2ad69a7fbc007 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -493,8 +493,8 @@ uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ - AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA18 periph A */ + <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_uart0_cts: uart0_cts-0 { @@ -511,8 +511,8 @@ uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB20 periph A with pullup */ - AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB21 periph A */ + <AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_uart1_rts: uart1_rts-0 { @@ -545,8 +545,8 @@ uart2 { pinctrl_uart2: uart2-0 { atmel,pins = - <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA22 periph A */ - AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA23 periph A with pullup */ + <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; pinctrl_uart2_rts: uart2_rts-0 { @@ -563,8 +563,8 @@ uart3 { pinctrl_uart3: uart3-0 { atmel,pins = - <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA5 periph B with pullup */ - AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA6 periph B */ + <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE + AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; }; pinctrl_uart3_rts: uart3_rts-0 { diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 655f06cd716a6..9118e29b6d6ad 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -434,8 +434,8 @@ usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */ - AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */ + <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_usart0_rts: usart0_rts-0 { @@ -468,8 +468,8 @@ usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB6 periph A with pullup */ - AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_usart1_rts: usart1_rts-0 { @@ -486,8 +486,8 @@ usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB8 periph A with pullup */ - AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB9 periph A */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_usart2_rts: usart2_rts-0 { @@ -504,8 +504,8 @@ usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB10 periph A with pullup */ - AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */ + <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_usart3_rts: usart3_rts-0 { @@ -522,16 +522,16 @@ uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA31 periph B with pullup */ - AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */ + <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE + AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB12 periph A with pullup */ - AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB13 periph A */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; }; diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts index e16c706d91ef4..d2b865f602932 100644 --- a/arch/arm/boot/dts/at91sam9260ek.dts +++ b/arch/arm/boot/dts/at91sam9260ek.dts @@ -201,7 +201,7 @@ status = "okay"; 24c512@50 { - compatible = "24c512"; + compatible = "atmel,24c512"; reg = <0x50>; }; }; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index ddfc63b8fd4e1..53c63d0a418a4 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -328,8 +328,8 @@ usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, - <AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; + <AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_usart0_rts: usart0_rts-0 { @@ -346,8 +346,8 @@ usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, - <AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; + <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_usart1_rts: usart1_rts-0 { @@ -364,8 +364,8 @@ usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, - <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; + <AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_usart2_rts: usart2_rts-0 { diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index f2405671e3bdc..87fb0660ab5d6 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -437,8 +437,8 @@ usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA26 periph A with pullup */ - AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA27 periph A */ + <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_usart0_rts: usart0_rts-0 { @@ -455,8 +455,8 @@ usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD0 periph A with pullup */ - AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD1 periph A */ + <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_usart1_rts: usart1_rts-0 { @@ -473,8 +473,8 @@ usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD2 periph A with pullup */ - AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD3 periph A */ + <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_usart2_rts: usart2_rts-0 { diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index e9a7c70830a86..727096f24f7c4 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -250,7 +250,7 @@ status = "okay"; 24c512@50 { - compatible = "24c512"; + compatible = "atmel,24c512"; reg = <0x50>; pagesize = <128>; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 50561b7b7939b..71df3adfc7ca1 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -211,7 +211,7 @@ status = "okay"; 24c512@50 { - compatible = "24c512"; + compatible = "atmel,24c512"; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi index a7da0dd0c98fa..0898213f3bb22 100644 --- a/arch/arm/boot/dts/at91sam9g25.dtsi +++ b/arch/arm/boot/dts/at91sam9g25.dtsi @@ -21,7 +21,7 @@ atmel,mux-mask = < /* A B C */ 0xffffffff 0xffe0399f 0xc000001c /* pioA */ - 0x0007ffff 0x8000fe3f 0x00000000 /* pioB */ + 0x0007ffff 0x00047e3f 0x00000000 /* pioB */ 0x80000000 0x07c0ffff 0xb83fffff /* pioC */ 0x003fffff 0x003f8000 0x00000000 /* pioD */ >; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 3a30eec7f508f..1ee25a475be87 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -555,8 +555,8 @@ usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB19 periph A with pullup */ - AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */ + <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_usart0_rts: usart0_rts-0 { @@ -573,8 +573,8 @@ uart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB4 periph A with pullup */ - AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB5 periph A */ + <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_usart1_rts: usart1_rts-0 { @@ -591,8 +591,8 @@ usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB6 periph A with pullup */ - AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB7 periph A */ + <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_usart2_rts: usart2_rts-0 { @@ -609,8 +609,8 @@ usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB9 periph A with pullup */ - AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB8 periph A */ + <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_usart3_rts: usart3_rts-0 { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 4b62f4f963f6b..37cb81f457b56 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -641,8 +641,8 @@ uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* PC17 periph C with pullup */ - AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC16 periph C */ + <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE + AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; }; }; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 3cae687dccbd2..bd001cca25a46 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -1,7 +1,8 @@ /* * at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC * - * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com> + * Copyright (C) 2014 Microchip + * Alexandre Belloni <alexandre.belloni@free-electrons.com> * * Licensed under GPLv2 or later. */ @@ -719,8 +720,8 @@ usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, - <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; + <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_usart1_rts: usart1_rts-0 { @@ -742,8 +743,8 @@ usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, - <AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; + <AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_usart2_rts: usart2_rts-0 { @@ -765,8 +766,8 @@ usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, - <AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; + <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_usart3_rts: usart3_rts-0 { diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index 4bde9f245e61f..27d8a1f442335 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -1,7 +1,8 @@ /* * at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board * - * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com> + * Copyright (C) 2014 Microchip + * Alexandre Belloni <alexandre.belloni@free-electrons.com> * * Licensed under GPLv2 only */ diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index fee4fe51a97e5..a3c3c3128148b 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -520,8 +520,8 @@ usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA0 periph A with pullup */ - AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA1 periph A */ + <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_usart0_rts: usart0_rts-0 { @@ -543,8 +543,8 @@ usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA5 periph A with pullup */ - AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA6 periph A */ + <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_usart1_rts: usart1_rts-0 { @@ -566,8 +566,8 @@ usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */ - AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA8 periph A */ + <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE + AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; }; pinctrl_usart2_rts: usart2_rts-0 { diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi index 43bb5b51caa66..a32d12b406a30 100644 --- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi @@ -21,8 +21,8 @@ usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */ - AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */ + <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE + AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; }; pinctrl_usart3_rts: usart3_rts-0 { diff --git a/arch/arm/boot/dts/atlas7-evb.dts b/arch/arm/boot/dts/atlas7-evb.dts index 1e9cd1a8508e1..900e03b7a7b21 100644 --- a/arch/arm/boot/dts/atlas7-evb.dts +++ b/arch/arm/boot/dts/atlas7-evb.dts @@ -73,7 +73,7 @@ btm { uart6: uart@11000000 { status = "okay"; - sirf,uart-has-rtscts; + uart-has-rtscts; }; }; diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi index 897103e0a79bf..0d9ff12bdf28c 100644 --- a/arch/arm/boot/dts/axp209.dtsi +++ b/arch/arm/boot/dts/axp209.dtsi @@ -58,6 +58,11 @@ status = "disabled"; }; + axp_adc: adc { + compatible = "x-powers,axp209-adc"; + #io-channel-cells = <1>; + }; + axp_gpio: gpio { compatible = "x-powers,axp209-gpio"; gpio-controller; diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi index 87fb08e812ecc..65a07a67aca93 100644 --- a/arch/arm/boot/dts/axp22x.dtsi +++ b/arch/arm/boot/dts/axp22x.dtsi @@ -57,6 +57,11 @@ status = "disabled"; }; + axp_adc: adc { + compatible = "x-powers,axp221-adc"; + #io-channel-cells = <1>; + }; + battery_power_supply: battery-power-supply { compatible = "x-powers,axp221-battery-power-supply"; status = "disabled"; diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi index fd55b896afa19..043c717dcef1a 100644 --- a/arch/arm/boot/dts/axp81x.dtsi +++ b/arch/arm/boot/dts/axp81x.dtsi @@ -48,7 +48,12 @@ interrupt-controller; #interrupt-cells = <1>; - axp_gpio: axp-gpio { + axp_adc: adc { + compatible = "x-powers,axp813-adc"; + #io-channel-cells = <1>; + }; + + axp_gpio: gpio { compatible = "x-powers,axp813-gpio"; gpio-controller; #gpio-cells = <2>; @@ -64,6 +69,11 @@ }; }; + battery_power_supply: battery-power-supply { + compatible = "x-powers,axp813-battery-power-supply"; + status = "disabled"; + }; + regulators { /* Default work frequency for buck regulators */ x-powers,dcdc-freq = <3000>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index b8565fc33eea6..b7f79f1c431ae 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -12,7 +12,7 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" -#include "bcm283x-rpi-usb-host.dtsi" +#include "bcm283x-rpi-usb-otg.dtsi" / { compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; @@ -131,6 +131,18 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_gpio14>; + pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <2000000>; + shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index 593f58d4ac0f3..6c3cfaa77f3dd 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -18,7 +18,9 @@ soc { firmware: firmware { - compatible = "raspberrypi,bcm2835-firmware"; + compatible = "raspberrypi,bcm2835-firmware", "simple-bus"; + #address-cells = <0>; + #size-cells = <0>; mboxes = <&mailbox>; }; diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts index 3e4ed7c5b0b3b..0b31d995a066c 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -25,6 +25,23 @@ }; }; +&firmware { + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "BT_ON", + "WL_ON", + "STATUS_LED", + "LAN_RUN", + "HPD_N", + "CAM_GPIO0", + "CAM_GPIO1", + "PWR_LOW_N"; + status = "okay"; + }; +}; + /* uart0 communicates with the BT module */ &uart0 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 9d293decf8d35..ac00e730f8983 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -223,6 +223,7 @@ gpclk2_gpio43: gpclk2_gpio43 { brcm,pins = <43>; brcm,function = <BCM2835_FSEL_ALT0>; + brcm,pull = <BCM2835_PUD_OFF>; }; i2c0_gpio0: i2c0_gpio0 { @@ -252,7 +253,7 @@ jtag_gpio4: jtag_gpio4 { brcm,pins = <4 5 6 12 13>; - brcm,function = <BCM2835_FSEL_ALT4>; + brcm,function = <BCM2835_FSEL_ALT5>; }; jtag_gpio22: jtag_gpio22 { brcm,pins = <22 23 24 25 26 27>; @@ -335,10 +336,12 @@ uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 { brcm,pins = <30 31>; brcm,function = <BCM2835_FSEL_ALT3>; + brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>; }; uart0_gpio32: uart0_gpio32 { brcm,pins = <32 33>; brcm,function = <BCM2835_FSEL_ALT3>; + brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>; }; uart0_gpio36: uart0_gpio36 { brcm,pins = <36 37>; @@ -397,8 +400,8 @@ i2s: i2s@7e203000 { compatible = "brcm,bcm2835-i2s"; - reg = <0x7e203000 0x20>, - <0x7e101098 0x02>; + reg = <0x7e203000 0x24>; + clocks = <&clocks BCM2835_CLOCK_PCM>; dmas = <&dma 2>, <&dma 3>; @@ -438,6 +441,17 @@ interrupts = <2 14>; /* pwa1 */ }; + dpi: dpi@7e208000 { + compatible = "brcm,bcm2835-dpi"; + reg = <0x7e208000 0x8c>; + clocks = <&clocks BCM2835_CLOCK_VPU>, + <&clocks BCM2835_CLOCK_DPI>; + clock-names = "core", "pixel"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + dsi0: dsi@7e209000 { compatible = "brcm,bcm2835-dsi0"; reg = <0x7e209000 0x78>; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts index 8bef6429feeeb..87ea6ba664f5c 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts @@ -35,6 +35,74 @@ 0x88000000 0x08000000>; }; + spi { + compatible = "spi-gpio"; + num-chipselects = <1>; + gpio-sck = <&chipcommon 7 0>; + gpio-mosi = <&chipcommon 4 0>; + cs-gpios = <&chipcommon 6 0>; + #address-cells = <1>; + #size-cells = <0>; + + hc595: gpio_spi@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + registers-number = <1>; + spi-max-frequency = <100000>; + + gpio-controller; + #gpio-cells = <2>; + + }; + }; + + leds { + compatible = "gpio-leds"; + + usb { + label = "bcm53xx:green:usb"; + gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; + }; + + power0 { + label = "bcm53xx:green:power"; + gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + power1 { + label = "bcm53xx:red:power"; + gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; + }; + + router0 { + label = "bcm53xx:green:router"; + gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + router1 { + label = "bcm53xx:amber:router"; + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + }; + + wan { + label = "bcm53xx:green:wan"; + gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + wireless0 { + label = "bcm53xx:green:wireless"; + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; + }; + + wireless1 { + label = "bcm53xx:amber:wireless"; + gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; + }; + }; + gpio-keys { compatible = "gpio-keys"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index fd8b8c689ffe9..ecd05e26c2629 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -204,10 +204,10 @@ reg = <4>; }; - port@5 { - ethernet = <&amac0>; + port@8 { + ethernet = <&amac2>; label = "cpu"; - reg = <5>; + reg = <8>; fixed-link { speed = <1000>; full-duplex; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index b8bde13de90a5..f5e85b301497c 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -208,10 +208,10 @@ reg = <4>; }; - port@5 { - ethernet = <&amac0>; + port@8 { + ethernet = <&amac2>; label = "cpu"; - reg = <5>; + reg = <8>; fixed-link { speed = <1000>; full-duplex; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index f0e2008f74901..ea3fc194f8f37 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -210,10 +210,10 @@ reg = <4>; }; - port@5 { - ethernet = <&amac0>; + port@8 { + ethernet = <&amac2>; label = "cpu"; - reg = <5>; + reg = <8>; fixed-link { speed = <1000>; full-duplex; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 2cf2392483b2a..3ea5f739e90be 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -245,10 +245,10 @@ reg = <4>; }; - port@5 { - ethernet = <&amac0>; + port@8 { + ethernet = <&amac2>; label = "cpu"; - reg = <5>; + reg = <8>; fixed-link { speed = <1000>; full-duplex; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index bce251a685916..ea9a0806b4460 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -216,10 +216,10 @@ reg = <4>; }; - port@5 { - ethernet = <&amac0>; + port@8 { + ethernet = <&amac2>; label = "cpu"; - reg = <5>; + reg = <8>; fixed-link { speed = <1000>; full-duplex; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index c75507922f7d7..3962fa4b07f5b 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -15,11 +15,16 @@ compatible = "ti,da850-evm", "ti,da850"; model = "DA850/AM1808/OMAP-L138 EVM"; + chosen { + stdout-path = &serial2; + }; + aliases { serial0 = &serial0; serial1 = &serial1; serial2 = &serial2; ethernet0 = ð0; + spi0 = &spi1; }; soc@1c00000 { diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts index 81942ae83e1f9..1ffd87796cac5 100644 --- a/arch/arm/boot/dts/da850-lego-ev3.dts +++ b/arch/arm/boot/dts/da850-lego-ev3.dts @@ -184,6 +184,23 @@ io-channel-names = "voltage", "current"; rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>; }; + + /* ARM local RAM */ + memory@ffff0000 { + compatible = "syscon", "simple-mfd"; + reg = <0xffff0000 0x2000>; /* 8k */ + + /* + * The I2C bootloader looks for this magic value to either + * boot normally or boot into a firmware update mode. + */ + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x1ffc>; + mode-normal = <0x00000000>; + mode-loader = <0x5555aaaa>; + }; + }; }; &pmx_core { @@ -293,7 +310,7 @@ * EEPROM contains the first stage bootloader, HW ID and Bluetooth MAC. */ eeprom@50 { - compatible = "microchip,24c128"; + compatible = "microchip,24c128", "atmel,24c128"; pagesize = <64>; read-only; reg = <0x50>; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index a7385c338ee9d..f1425b0f3a54a 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -87,33 +87,6 @@ DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */ >; }; - - mmc1_pins_default: mmc1_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ - DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ - DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ - DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ - DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ - DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ - DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ - >; - }; - - mmc2_pins_default: mmc2_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ - DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ - DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ - DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ - DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ - DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ - DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ - DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ - DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ - DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ - >; - }; }; &i2c1 { @@ -350,6 +323,7 @@ &mmc2 { status = "okay"; vmmc-supply = <&evm_1v8_sw>; + vqmmc-supply = <&evm_1v8_sw>; bus-width = <8>; pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v"; pinctrl-0 = <&mmc2_pins_default>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index e4a420f168009..f4ddd86f2c774 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -92,8 +92,6 @@ clock-latency = <300000>; /* From omap-cpufreq driver */ /* cooling options */ - cooling-min-level = <0>; - cooling-max-level = <2>; #cooling-cells = <2>; /* min followed by max */ vbb-supply = <&abb_mpu>; diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index 41c9132eb550d..ebc4bbae981e2 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -24,13 +24,13 @@ regulator-name = "vddshv8"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; regulator-boot-on; vin-supply = <&evm_5v0>; gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; states = <1800000 0x0 - 3000000 0x1>; + 3300000 0x1>; }; evm_1v8_sw: fixedregulator-evm_1v8 { @@ -50,6 +50,19 @@ }; }; +&dra7_pmx_core { + mmc1_pins_default: mmc1_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index c4fe7f8ef72ab..2deb96405d066 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -9,6 +9,7 @@ #include "dra76x.dtsi" #include "dra7-evm-common.dtsi" +#include "dra76x-mmc-iodelay.dtsi" #include <dt-bindings/net/ti-dp83867.h> / { @@ -100,46 +101,6 @@ }; }; -&dra7_pmx_core { - mmc1_pins_default: mmc1_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ - DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ - DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ - DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ - DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ - DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ - DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ - >; - }; - - mmc1_pins_sdr12: pinmux_mmc1_sdr12_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ - DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ - DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ - DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ - DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ - DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ - >; - }; - - mmc2_pins_default: mmc2_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ - DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ - DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ - DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ - DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ - DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ - DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ - DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ - DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ - DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ - >; - }; -}; - &i2c1 { status = "okay"; clock-frequency = <400000>; @@ -353,16 +314,21 @@ * is always hardwired. */ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; + pinctrl-names = "default", "hs"; pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; }; &mmc2 { status = "okay"; vmmc-supply = <&vio_1v8>; + vqmmc-supply = <&vio_1v8>; bus-width = <8>; - pinctrl-names = "default"; + pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v"; pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_default>; + pinctrl-2 = <&mmc2_pins_default>; + pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_conf>; }; /* No RTC on this device */ diff --git a/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi new file mode 100644 index 0000000000000..baba7b00eca79 --- /dev/null +++ b/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi @@ -0,0 +1,285 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018 Texas Instruments +// MMC IOdelay values for TI's DRA76x and AM576x SoCs. +// Author: Sekhar Nori <nsekhar@ti.com> + +/* + * Rules for modifying this file: + * a) Update of this file should typically correspond to a datamanual revision. + * Datamanual revision that was used should be updated in comment below. + * If there is no update to datamanual, do not update the values. If you + * need to use values different from that recommended by the datamanual + * for your design, then you should consider adding values to the device- + * -tree file for your board directly. + * b) We keep the mode names as close to the datamanual as possible. So + * if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v, + * we follow that in code too. + * c) If the values change between multiple revisions of silicon, we add + * a revision tag to both the new and old entry. Use 'rev11' for PG 1.1, + * 'rev20' for PG 2.0 and so on. + * d) The node name and node label should be the exact same string. This is + * to curb naming creativity and achieve consistency. + * + * Datamanual Revisions: + * + * DRA76x Silicon Revision 1.0: SPRS993A, Revised July 2017 + * + */ + +&dra7_pmx_core { + mmc1_pins_default: mmc1_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_hs: mmc1_pins_hs { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_sdr50: mmc1_pins_sdr50 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_ddr50: mmc1_pins_ddr50 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc2_pins_default: mmc2_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc2_pins_hs200: mmc2_pins_hs200 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc3_pins_default: mmc3_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ + DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ + DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ + DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ + DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ + DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ + >; + }; + + mmc4_pins_hs: mmc4_pins_hs { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */ + DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */ + DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */ + DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */ + DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */ + DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */ + >; + }; +}; + +&dra7_iodelay_core { + + /* Corresponds to MMC1_DDR_MANUAL1 in datamanual */ + mmc1_iodelay_ddr_conf: mmc1_iodelay_ddr_conf { + pinctrl-pin-array = < + 0x618 A_DELAY_PS(489) G_DELAY_PS(0) /* CFG_MMC1_CLK_IN */ + 0x624 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_IN */ + 0x630 A_DELAY_PS(374) G_DELAY_PS(0) /* CFG_MMC1_DAT0_IN */ + 0x63c A_DELAY_PS(31) G_DELAY_PS(0) /* CFG_MMC1_DAT1_IN */ + 0x648 A_DELAY_PS(56) G_DELAY_PS(0) /* CFG_MMC1_DAT2_IN */ + 0x654 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */ + 0x620 A_DELAY_PS(1355) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */ + 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */ + 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */ + 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */ + 0x638 A_DELAY_PS(0) G_DELAY_PS(4) /* CFG_MMC1_DAT0_OUT */ + 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */ + 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */ + 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */ + 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */ + 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */ + 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */ + >; + }; + + /* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */ + mmc1_iodelay_sdr104_conf: mmc1_iodelay_sdr104_conf { + pinctrl-pin-array = < + 0x620 A_DELAY_PS(892) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */ + 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */ + 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */ + 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */ + 0x638 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */ + 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */ + 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */ + 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */ + 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */ + 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */ + 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */ + >; + }; + + /* Corresponds to MMC2_HS200_MANUAL1 in datamanual */ + mmc2_iodelay_hs200_conf: mmc2_iodelay_hs200_conf { + pinctrl-pin-array = < + 0x190 A_DELAY_PS(384) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */ + 0x194 A_DELAY_PS(0) G_DELAY_PS(174) /* CFG_GPMC_A19_OUT */ + 0x1a8 A_DELAY_PS(410) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */ + 0x1ac A_DELAY_PS(85) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ + 0x1b4 A_DELAY_PS(468) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */ + 0x1b8 A_DELAY_PS(139) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */ + 0x1c0 A_DELAY_PS(676) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */ + 0x1c4 A_DELAY_PS(69) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */ + 0x1d0 A_DELAY_PS(1062) G_DELAY_PS(154) /* CFG_GPMC_A23_OUT */ + 0x1d8 A_DELAY_PS(640) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */ + 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ + 0x1e4 A_DELAY_PS(356) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */ + 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ + 0x1f0 A_DELAY_PS(579) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */ + 0x1f4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ + 0x1fc A_DELAY_PS(435) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */ + 0x200 A_DELAY_PS(36) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ + 0x364 A_DELAY_PS(759) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */ + 0x368 A_DELAY_PS(72) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */ + >; + }; + + /* Corresponds to MMC3_MANUAL1 in datamanual */ + mmc3_iodelay_manual1_conf: mmc3_iodelay_manual1_conf { + pinctrl-pin-array = < + 0x678 A_DELAY_PS(0) G_DELAY_PS(386) /* CFG_MMC3_CLK_IN */ + 0x680 A_DELAY_PS(605) G_DELAY_PS(0) /* CFG_MMC3_CLK_OUT */ + 0x684 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_IN */ + 0x688 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OEN */ + 0x68c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OUT */ + 0x690 A_DELAY_PS(171) G_DELAY_PS(0) /* CFG_MMC3_DAT0_IN */ + 0x694 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OEN */ + 0x698 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OUT */ + 0x69c A_DELAY_PS(221) G_DELAY_PS(0) /* CFG_MMC3_DAT1_IN */ + 0x6a0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OEN */ + 0x6a4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OUT */ + 0x6a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_IN */ + 0x6ac A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OEN */ + 0x6b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OUT */ + 0x6b4 A_DELAY_PS(474) G_DELAY_PS(0) /* CFG_MMC3_DAT3_IN */ + 0x6b8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OEN */ + 0x6bc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OUT */ + >; + }; + + /* Corresponds to MMC3_MANUAL2 in datamanual */ + mmc3_iodelay_sdr50_conf: mmc3_iodelay_sdr50_conf { + pinctrl-pin-array = < + 0x678 A_DELAY_PS(852) G_DELAY_PS(0) /* CFG_MMC3_CLK_IN */ + 0x680 A_DELAY_PS(94) G_DELAY_PS(0) /* CFG_MMC3_CLK_OUT */ + 0x684 A_DELAY_PS(122) G_DELAY_PS(0) /* CFG_MMC3_CMD_IN */ + 0x688 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OEN */ + 0x68c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OUT */ + 0x690 A_DELAY_PS(91) G_DELAY_PS(0) /* CFG_MMC3_DAT0_IN */ + 0x694 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OEN */ + 0x698 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OUT */ + 0x69c A_DELAY_PS(57) G_DELAY_PS(0) /* CFG_MMC3_DAT1_IN */ + 0x6a0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OEN */ + 0x6a4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OUT */ + 0x6a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_IN */ + 0x6ac A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OEN */ + 0x6b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OUT */ + 0x6b4 A_DELAY_PS(375) G_DELAY_PS(0) /* CFG_MMC3_DAT3_IN */ + 0x6b8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OEN */ + 0x6bc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OUT */ + >; + }; + + /* Corresponds to MMC4_MANUAL1 in datamanual */ + mmc4_iodelay_manual1_conf: mmc4_iodelay_manual1_conf { + pinctrl-pin-array = < + 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */ + 0x848 A_DELAY_PS(1147) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */ + 0x84c A_DELAY_PS(1834) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */ + 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */ + 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */ + 0x870 A_DELAY_PS(2165) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */ + 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */ + 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */ + 0x87c A_DELAY_PS(1929) G_DELAY_PS(64) /* CFG_UART2_RTSN_IN */ + 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */ + 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */ + 0x888 A_DELAY_PS(1935) G_DELAY_PS(128) /* CFG_UART2_RXD_IN */ + 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */ + 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */ + 0x894 A_DELAY_PS(2172) G_DELAY_PS(44) /* CFG_UART2_TXD_IN */ + 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */ + 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */ + >; + }; + + /* Corresponds to MMC4_DS_MANUAL1 in datamanual */ + mmc4_iodelay_default_conf: mmc4_iodelay_default_conf { + pinctrl-pin-array = < + 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */ + 0x848 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */ + 0x84c A_DELAY_PS(307) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */ + 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */ + 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */ + 0x870 A_DELAY_PS(785) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */ + 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */ + 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */ + 0x87c A_DELAY_PS(613) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */ + 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */ + 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */ + 0x888 A_DELAY_PS(683) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */ + 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */ + 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */ + 0x894 A_DELAY_PS(835) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */ + 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */ + 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */ + >; + }; +}; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 60d0a732833aa..c238407133bfe 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -38,28 +38,28 @@ #size-cells = <0>; one { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; label = "DSW2-1"; linux,code = <KEY_1>; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; two { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; label = "DSW2-2"; linux,code = <KEY_2>; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; three { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; label = "DSW2-3"; linux,code = <KEY_3>; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; }; four { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; label = "DSW2-4"; linux,code = <KEY_4>; diff --git a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi index 25186ac4188df..1dbf3bbff8d30 100644 --- a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi +++ b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos SoC MFC (Video Codec) reserved memory common definition. * * Copyright (c) 2016 Samsung Electronics Co., Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ / { diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi index 09a2040054edc..4b3dd0549a540 100644 --- a/arch/arm/boot/dts/exynos-syscon-restart.dtsi +++ b/arch/arm/boot/dts/exynos-syscon-restart.dtsi @@ -1,9 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos SoC syscon reboot/poweroff nodes common definition. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ / { diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index 0aa577fe9f950..620b50c19ead9 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -245,6 +245,7 @@ regulator-name = "VLDO23_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; ldo24_reg: LDO24 { @@ -316,6 +317,41 @@ status = "okay"; }; +&mshc_1 { + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + non-removable; + keep-power-in-suspend; + fifo-depth = <0x40>; + vqmmc-supply = <&ldo11_reg>; + /* + * Voltage negotiation is broken for the SDIO periph so we + * can't actually set the voltage here. + * vmmc-supply = <&ldo23_reg>; + */ + card-detect-delay = <500>; + clock-frequency = <100000000>; + max-frequency = <100000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 1>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd1_cmd &sd1_clk &sd1_bus1 &sd1_bus4 &wlanen>; + bus-width = <4>; + status = "okay"; +}; + +&pinctrl_1 { + wlanen: wlanen { + samsung,pins = "gpx2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>; + samsung,pin-val = <1>; + }; +}; + &rtc { clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>; clock-names = "rtc", "rtc_src"; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index b8fb94f5daa8a..0a5f989d963b6 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -161,34 +161,39 @@ syscon = <&pmu_system_controller>; }; - pd_cam: cam-power-domain@10023c00 { + pd_cam: power-domain@10023c00 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C00 0x20>; #power-domain-cells = <0>; + label = "CAM"; }; - pd_mfc: mfc-power-domain@10023c40 { + pd_mfc: power-domain@10023c40 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C40 0x20>; #power-domain-cells = <0>; + label = "MFC"; }; - pd_g3d: g3d-power-domain@10023c60 { + pd_g3d: power-domain@10023c60 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C60 0x20>; #power-domain-cells = <0>; + label = "G3D"; }; - pd_lcd0: lcd0-power-domain@10023c80 { + pd_lcd0: power-domain@10023c80 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C80 0x20>; #power-domain-cells = <0>; + label = "LCD0"; }; - pd_isp: isp-power-domain@10023ca0 { + pd_isp: power-domain@10023ca0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; #power-domain-cells = <0>; + label = "ISP"; }; cmu: clock-controller@10030000 { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 6d59cc8276490..909a9f2bf5be6 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -52,961 +52,976 @@ serial3 = &serial_3; }; - clock_audss: clock-controller@3810000 { - compatible = "samsung,exynos4210-audss-clock"; - reg = <0x03810000 0x0C>; - #clock-cells = <1>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>, - <&clock CLK_SCLK_AUDIO0>, <&clock CLK_SCLK_AUDIO0>; - clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; - }; - - i2s0: i2s@3830000 { - compatible = "samsung,s5pv210-i2s"; - reg = <0x03830000 0x100>; - clocks = <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>, - <&clock_audss EXYNOS_SCLK_I2S>; - clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; - #clock-cells = <1>; - clock-output-names = "i2s_cdclk0"; - dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>; - dma-names = "tx", "rx", "tx-sec"; - samsung,idma-addr = <0x03000000>; - #sound-dai-cells = <1>; - status = "disabled"; - }; + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; - chipid@10000000 { - compatible = "samsung,exynos4210-chipid"; - reg = <0x10000000 0x100>; - }; + clock_audss: clock-controller@3810000 { + compatible = "samsung,exynos4210-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>, + <&clock CLK_SCLK_AUDIO0>, + <&clock CLK_SCLK_AUDIO0>; + clock-names = "pll_ref", "pll_in", "sclk_audio", + "sclk_pcm_in"; + }; - scu: snoop-control-unit@10500000 { - compatible = "arm,cortex-a9-scu"; - reg = <0x10500000 0x2000>; - }; + i2s0: i2s@3830000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0x03830000 0x100>; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + #clock-cells = <1>; + clock-output-names = "i2s_cdclk0"; + dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>; + dma-names = "tx", "rx", "tx-sec"; + samsung,idma-addr = <0x03000000>; + #sound-dai-cells = <1>; + status = "disabled"; + }; - memory-controller@12570000 { - compatible = "samsung,exynos4210-srom"; - reg = <0x12570000 0x14>; - }; + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; - mipi_phy: video-phy { - compatible = "samsung,s5pv210-mipi-video-phy"; - #phy-cells = <1>; - syscon = <&pmu_system_controller>; - }; + scu: snoop-control-unit@10500000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x10500000 0x2000>; + }; - pd_mfc: mfc-power-domain@10023c40 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10023C40 0x20>; - #power-domain-cells = <0>; - label = "MFC"; - }; + memory-controller@12570000 { + compatible = "samsung,exynos4210-srom"; + reg = <0x12570000 0x14>; + }; - pd_g3d: g3d-power-domain@10023c60 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10023C60 0x20>; - #power-domain-cells = <0>; - label = "G3D"; - }; + mipi_phy: video-phy { + compatible = "samsung,s5pv210-mipi-video-phy"; + #phy-cells = <1>; + syscon = <&pmu_system_controller>; + }; - pd_lcd0: lcd0-power-domain@10023c80 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10023C80 0x20>; - #power-domain-cells = <0>; - label = "LCD0"; - }; + pd_mfc: mfc-power-domain@10023c40 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C40 0x20>; + #power-domain-cells = <0>; + label = "MFC"; + }; - pd_tv: tv-power-domain@10023c20 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10023C20 0x20>; - #power-domain-cells = <0>; - power-domains = <&pd_lcd0>; - label = "TV"; - }; + pd_g3d: g3d-power-domain@10023c60 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C60 0x20>; + #power-domain-cells = <0>; + label = "G3D"; + }; - pd_cam: cam-power-domain@10023c00 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10023C00 0x20>; - #power-domain-cells = <0>; - label = "CAM"; - }; + pd_lcd0: lcd0-power-domain@10023c80 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C80 0x20>; + #power-domain-cells = <0>; + label = "LCD0"; + }; - pd_gps: gps-power-domain@10023ce0 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10023CE0 0x20>; - #power-domain-cells = <0>; - label = "GPS"; - }; + pd_tv: tv-power-domain@10023c20 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C20 0x20>; + #power-domain-cells = <0>; + power-domains = <&pd_lcd0>; + label = "TV"; + }; - pd_gps_alive: gps-alive-power-domain@10023d00 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10023D00 0x20>; - #power-domain-cells = <0>; - label = "GPS alive"; - }; + pd_cam: cam-power-domain@10023c00 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C00 0x20>; + #power-domain-cells = <0>; + label = "CAM"; + }; - gic: interrupt-controller@10490000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x10490000 0x10000>, <0x10480000 0x10000>; - }; + pd_gps: gps-power-domain@10023ce0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CE0 0x20>; + #power-domain-cells = <0>; + label = "GPS"; + }; - combiner: interrupt-controller@10440000 { - compatible = "samsung,exynos4210-combiner"; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0x10440000 0x1000>; - }; + pd_gps_alive: gps-alive-power-domain@10023d00 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023D00 0x20>; + #power-domain-cells = <0>; + label = "GPS alive"; + }; - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupt-parent = <&combiner>; - interrupts = <2 2>, <3 2>; - }; + gic: interrupt-controller@10490000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10490000 0x10000>, <0x10480000 0x10000>; + }; - sys_reg: syscon@10010000 { - compatible = "samsung,exynos4-sysreg", "syscon"; - reg = <0x10010000 0x400>; - }; + combiner: interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x10440000 0x1000>; + }; - pmu_system_controller: system-controller@10020000 { - compatible = "samsung,exynos4210-pmu", "syscon"; - reg = <0x10020000 0x4000>; - interrupt-controller; - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - }; + pmu: pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&combiner>; + interrupts = <2 2>, <3 2>; + }; - dsi_0: dsi@11c80000 { - compatible = "samsung,exynos4210-mipi-dsi"; - reg = <0x11C80000 0x10000>; - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&pd_lcd0>; - phys = <&mipi_phy 1>; - phy-names = "dsim"; - clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>; - clock-names = "bus_clk", "sclk_mipi"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; + sys_reg: syscon@10010000 { + compatible = "samsung,exynos4-sysreg", "syscon"; + reg = <0x10010000 0x400>; + }; - camera { - compatible = "samsung,fimc", "simple-bus"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <1>; - #clock-cells = <1>; - clock-output-names = "cam_a_clkout", "cam_b_clkout"; - ranges; + pmu_system_controller: system-controller@10020000 { + compatible = "samsung,exynos4210-pmu", "syscon"; + reg = <0x10020000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + }; - fimc_0: fimc@11800000 { - compatible = "samsung,exynos4210-fimc"; - reg = <0x11800000 0x1000>; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>; - clock-names = "fimc", "sclk_fimc"; - power-domains = <&pd_cam>; - samsung,sysreg = <&sys_reg>; - iommus = <&sysmmu_fimc0>; + dsi_0: dsi@11c80000 { + compatible = "samsung,exynos4210-mipi-dsi"; + reg = <0x11C80000 0x10000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_lcd0>; + phys = <&mipi_phy 1>; + phy-names = "dsim"; + clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>; + clock-names = "bus_clk", "sclk_mipi"; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; - fimc_1: fimc@11810000 { - compatible = "samsung,exynos4210-fimc"; - reg = <0x11810000 0x1000>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>; - clock-names = "fimc", "sclk_fimc"; - power-domains = <&pd_cam>; - samsung,sysreg = <&sys_reg>; - iommus = <&sysmmu_fimc1>; + camera: camera { + compatible = "samsung,fimc", "simple-bus"; status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + #clock-cells = <1>; + clock-output-names = "cam_a_clkout", "cam_b_clkout"; + ranges; + + fimc_0: fimc@11800000 { + compatible = "samsung,exynos4210-fimc"; + reg = <0x11800000 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_FIMC0>, + <&clock CLK_SCLK_FIMC0>; + clock-names = "fimc", "sclk_fimc"; + power-domains = <&pd_cam>; + samsung,sysreg = <&sys_reg>; + iommus = <&sysmmu_fimc0>; + status = "disabled"; + }; + + fimc_1: fimc@11810000 { + compatible = "samsung,exynos4210-fimc"; + reg = <0x11810000 0x1000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_FIMC1>, + <&clock CLK_SCLK_FIMC1>; + clock-names = "fimc", "sclk_fimc"; + power-domains = <&pd_cam>; + samsung,sysreg = <&sys_reg>; + iommus = <&sysmmu_fimc1>; + status = "disabled"; + }; + + fimc_2: fimc@11820000 { + compatible = "samsung,exynos4210-fimc"; + reg = <0x11820000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_FIMC2>, + <&clock CLK_SCLK_FIMC2>; + clock-names = "fimc", "sclk_fimc"; + power-domains = <&pd_cam>; + samsung,sysreg = <&sys_reg>; + iommus = <&sysmmu_fimc2>; + status = "disabled"; + }; + + fimc_3: fimc@11830000 { + compatible = "samsung,exynos4210-fimc"; + reg = <0x11830000 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_FIMC3>, + <&clock CLK_SCLK_FIMC3>; + clock-names = "fimc", "sclk_fimc"; + power-domains = <&pd_cam>; + samsung,sysreg = <&sys_reg>; + iommus = <&sysmmu_fimc3>; + status = "disabled"; + }; + + csis_0: csis@11880000 { + compatible = "samsung,exynos4210-csis"; + reg = <0x11880000 0x4000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_CSIS0>, + <&clock CLK_SCLK_CSIS0>; + clock-names = "csis", "sclk_csis"; + bus-width = <4>; + power-domains = <&pd_cam>; + phys = <&mipi_phy 0>; + phy-names = "csis"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + csis_1: csis@11890000 { + compatible = "samsung,exynos4210-csis"; + reg = <0x11890000 0x4000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_CSIS1>, + <&clock CLK_SCLK_CSIS1>; + clock-names = "csis", "sclk_csis"; + bus-width = <2>; + power-domains = <&pd_cam>; + phys = <&mipi_phy 2>; + phy-names = "csis"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; }; - fimc_2: fimc@11820000 { - compatible = "samsung,exynos4210-fimc"; - reg = <0x11820000 0x1000>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>; - clock-names = "fimc", "sclk_fimc"; - power-domains = <&pd_cam>; - samsung,sysreg = <&sys_reg>; - iommus = <&sysmmu_fimc2>; + rtc: rtc@10070000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x10070000 0x100>; + interrupt-parent = <&pmu_system_controller>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_RTC>; + clock-names = "rtc"; status = "disabled"; }; - fimc_3: fimc@11830000 { - compatible = "samsung,exynos4210-fimc"; - reg = <0x11830000 0x1000>; - interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>; - clock-names = "fimc", "sclk_fimc"; - power-domains = <&pd_cam>; - samsung,sysreg = <&sys_reg>; - iommus = <&sysmmu_fimc3>; + keypad: keypad@100a0000 { + compatible = "samsung,s5pv210-keypad"; + reg = <0x100A0000 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_KEYIF>; + clock-names = "keypad"; status = "disabled"; }; - csis_0: csis@11880000 { - compatible = "samsung,exynos4210-csis"; - reg = <0x11880000 0x4000>; - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>; - clock-names = "csis", "sclk_csis"; - bus-width = <4>; - power-domains = <&pd_cam>; - phys = <&mipi_phy 0>; - phy-names = "csis"; + sdhci_0: sdhci@12510000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12510000 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>; + clock-names = "hsmmc", "mmc_busclk.2"; status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; }; - csis_1: csis@11890000 { - compatible = "samsung,exynos4210-csis"; - reg = <0x11890000 0x4000>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>; - clock-names = "csis", "sclk_csis"; - bus-width = <2>; - power-domains = <&pd_cam>; - phys = <&mipi_phy 2>; - phy-names = "csis"; + sdhci_1: sdhci@12520000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12520000 0x100>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>; + clock-names = "hsmmc", "mmc_busclk.2"; status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; }; - }; - - rtc: rtc@10070000 { - compatible = "samsung,s3c6410-rtc"; - reg = <0x10070000 0x100>; - interrupt-parent = <&pmu_system_controller>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_RTC>; - clock-names = "rtc"; - status = "disabled"; - }; - - keypad: keypad@100a0000 { - compatible = "samsung,s5pv210-keypad"; - reg = <0x100A0000 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_KEYIF>; - clock-names = "keypad"; - status = "disabled"; - }; - - sdhci_0: sdhci@12510000 { - compatible = "samsung,exynos4210-sdhci"; - reg = <0x12510000 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>; - clock-names = "hsmmc", "mmc_busclk.2"; - status = "disabled"; - }; - sdhci_1: sdhci@12520000 { - compatible = "samsung,exynos4210-sdhci"; - reg = <0x12520000 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>; - clock-names = "hsmmc", "mmc_busclk.2"; - status = "disabled"; - }; - - sdhci_2: sdhci@12530000 { - compatible = "samsung,exynos4210-sdhci"; - reg = <0x12530000 0x100>; - interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>; - clock-names = "hsmmc", "mmc_busclk.2"; - status = "disabled"; - }; - - sdhci_3: sdhci@12540000 { - compatible = "samsung,exynos4210-sdhci"; - reg = <0x12540000 0x100>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>; - clock-names = "hsmmc", "mmc_busclk.2"; - status = "disabled"; - }; - - exynos_usbphy: exynos-usbphy@125b0000 { - compatible = "samsung,exynos4210-usb2-phy"; - reg = <0x125B0000 0x100>; - samsung,pmureg-phandle = <&pmu_system_controller>; - clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>; - clock-names = "phy", "ref"; - #phy-cells = <1>; - status = "disabled"; - }; - - hsotg: hsotg@12480000 { - compatible = "samsung,s3c6400-hsotg"; - reg = <0x12480000 0x20000>; - interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_USB_DEVICE>; - clock-names = "otg"; - phys = <&exynos_usbphy 0>; - phy-names = "usb2-phy"; - status = "disabled"; - }; + sdhci_2: sdhci@12530000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12530000 0x100>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>; + clock-names = "hsmmc", "mmc_busclk.2"; + status = "disabled"; + }; - ehci: ehci@12580000 { - compatible = "samsung,exynos4210-ehci"; - reg = <0x12580000 0x100>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_USB_HOST>; - clock-names = "usbhost"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - phys = <&exynos_usbphy 1>; + sdhci_3: sdhci@12540000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12540000 0x100>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>; + clock-names = "hsmmc", "mmc_busclk.2"; status = "disabled"; }; - port@1 { - reg = <1>; - phys = <&exynos_usbphy 2>; + + exynos_usbphy: exynos-usbphy@125b0000 { + compatible = "samsung,exynos4210-usb2-phy"; + reg = <0x125B0000 0x100>; + samsung,pmureg-phandle = <&pmu_system_controller>; + clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>; + clock-names = "phy", "ref"; + #phy-cells = <1>; status = "disabled"; }; - port@2 { - reg = <2>; - phys = <&exynos_usbphy 3>; + + hsotg: hsotg@12480000 { + compatible = "samsung,s3c6400-hsotg"; + reg = <0x12480000 0x20000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_USB_DEVICE>; + clock-names = "otg"; + phys = <&exynos_usbphy 0>; + phy-names = "usb2-phy"; status = "disabled"; }; - }; - ohci: ohci@12590000 { - compatible = "samsung,exynos4210-ohci"; - reg = <0x12590000 0x100>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_USB_HOST>; - clock-names = "usbhost"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - phys = <&exynos_usbphy 1>; + ehci: ehci@12580000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0x12580000 0x100>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_USB_HOST>; + clock-names = "usbhost"; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&exynos_usbphy 1>; + status = "disabled"; + }; + port@1 { + reg = <1>; + phys = <&exynos_usbphy 2>; + status = "disabled"; + }; + port@2 { + reg = <2>; + phys = <&exynos_usbphy 3>; + status = "disabled"; + }; }; - }; - i2s1: i2s@13960000 { - compatible = "samsung,s3c6410-i2s"; - reg = <0x13960000 0x100>; - clocks = <&clock CLK_I2S1>; - clock-names = "iis"; - #clock-cells = <1>; - clock-output-names = "i2s_cdclk1"; - dmas = <&pdma1 12>, <&pdma1 11>; - dma-names = "tx", "rx"; - #sound-dai-cells = <1>; - status = "disabled"; - }; + ohci: ohci@12590000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0x12590000 0x100>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_USB_HOST>; + clock-names = "usbhost"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&exynos_usbphy 1>; + status = "disabled"; + }; + }; - i2s2: i2s@13970000 { - compatible = "samsung,s3c6410-i2s"; - reg = <0x13970000 0x100>; - clocks = <&clock CLK_I2S2>; - clock-names = "iis"; - #clock-cells = <1>; - clock-output-names = "i2s_cdclk2"; - dmas = <&pdma0 14>, <&pdma0 13>; - dma-names = "tx", "rx"; - #sound-dai-cells = <1>; - status = "disabled"; - }; + i2s1: i2s@13960000 { + compatible = "samsung,s3c6410-i2s"; + reg = <0x13960000 0x100>; + clocks = <&clock CLK_I2S1>; + clock-names = "iis"; + #clock-cells = <1>; + clock-output-names = "i2s_cdclk1"; + dmas = <&pdma1 12>, <&pdma1 11>; + dma-names = "tx", "rx"; + #sound-dai-cells = <1>; + status = "disabled"; + }; - mfc: codec@13400000 { - compatible = "samsung,mfc-v5"; - reg = <0x13400000 0x10000>; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&pd_mfc>; - clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>; - clock-names = "mfc", "sclk_mfc"; - iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; - iommu-names = "left", "right"; - }; + i2s2: i2s@13970000 { + compatible = "samsung,s3c6410-i2s"; + reg = <0x13970000 0x100>; + clocks = <&clock CLK_I2S2>; + clock-names = "iis"; + #clock-cells = <1>; + clock-output-names = "i2s_cdclk2"; + dmas = <&pdma0 14>, <&pdma0 13>; + dma-names = "tx", "rx"; + #sound-dai-cells = <1>; + status = "disabled"; + }; - serial_0: serial@13800000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13800000 0x100>; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; - clock-names = "uart", "clk_uart_baud0"; - dmas = <&pdma0 15>, <&pdma0 16>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + mfc: codec@13400000 { + compatible = "samsung,mfc-v5"; + reg = <0x13400000 0x10000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_mfc>; + clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>; + clock-names = "mfc", "sclk_mfc"; + iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; + iommu-names = "left", "right"; + }; - serial_1: serial@13810000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13810000 0x100>; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; - clock-names = "uart", "clk_uart_baud0"; - dmas = <&pdma1 15>, <&pdma1 16>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + serial_0: serial@13800000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13800000 0x100>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 15>, <&pdma0 16>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - serial_2: serial@13820000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13820000 0x100>; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; - clock-names = "uart", "clk_uart_baud0"; - dmas = <&pdma0 17>, <&pdma0 18>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + serial_1: serial@13810000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13810000 0x100>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 15>, <&pdma1 16>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - serial_3: serial@13830000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13830000 0x100>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; - clock-names = "uart", "clk_uart_baud0"; - dmas = <&pdma1 17>, <&pdma1 18>; - dma-names = "rx", "tx"; - status = "disabled"; - }; + serial_2: serial@13820000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13820000 0x100>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 17>, <&pdma0 18>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - i2c_0: i2c@13860000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x13860000 0x100>; - interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_I2C0>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_bus>; - status = "disabled"; - }; + serial_3: serial@13830000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13830000 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; + clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 17>, <&pdma1 18>; + dma-names = "rx", "tx"; + status = "disabled"; + }; - i2c_1: i2c@13870000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x13870000 0x100>; - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_I2C1>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_bus>; - status = "disabled"; - }; + i2c_0: i2c@13860000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13860000 0x100>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_I2C0>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; + status = "disabled"; + }; - i2c_2: i2c@13880000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x13880000 0x100>; - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_I2C2>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_bus>; - status = "disabled"; - }; + i2c_1: i2c@13870000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13870000 0x100>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_I2C1>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; + status = "disabled"; + }; - i2c_3: i2c@13890000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x13890000 0x100>; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_I2C3>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_bus>; - status = "disabled"; - }; + i2c_2: i2c@13880000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13880000 0x100>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_I2C2>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; + status = "disabled"; + }; - i2c_4: i2c@138a0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x138A0000 0x100>; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_I2C4>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_bus>; - status = "disabled"; - }; + i2c_3: i2c@13890000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13890000 0x100>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_I2C3>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; + status = "disabled"; + }; - i2c_5: i2c@138b0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x138B0000 0x100>; - interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_I2C5>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_bus>; - status = "disabled"; - }; + i2c_4: i2c@138a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138A0000 0x100>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_I2C4>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_bus>; + status = "disabled"; + }; - i2c_6: i2c@138c0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x138C0000 0x100>; - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_I2C6>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_bus>; - status = "disabled"; - }; + i2c_5: i2c@138b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138B0000 0x100>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_I2C5>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_bus>; + status = "disabled"; + }; - i2c_7: i2c@138d0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x138D0000 0x100>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_I2C7>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c7_bus>; - status = "disabled"; - }; + i2c_6: i2c@138c0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138C0000 0x100>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_I2C6>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_bus>; + status = "disabled"; + }; - i2c_8: i2c@138e0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-hdmiphy-i2c"; - reg = <0x138E0000 0x100>; - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_I2C_HDMI>; - clock-names = "i2c"; - status = "disabled"; - - hdmi_i2c_phy: hdmiphy@38 { - compatible = "exynos4210-hdmiphy"; - reg = <0x38>; + i2c_7: i2c@138d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138D0000 0x100>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_I2C7>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_bus>; + status = "disabled"; }; - }; - spi_0: spi@13920000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x13920000 0x100>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&pdma0 7>, <&pdma0 6>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>; - clock-names = "spi", "spi_busclk0"; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_bus>; - status = "disabled"; - }; + i2c_8: i2c@138e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-hdmiphy-i2c"; + reg = <0x138E0000 0x100>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_I2C_HDMI>; + clock-names = "i2c"; + status = "disabled"; - spi_1: spi@13930000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x13930000 0x100>; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&pdma1 7>, <&pdma1 6>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>; - clock-names = "spi", "spi_busclk0"; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_bus>; - status = "disabled"; - }; + hdmi_i2c_phy: hdmiphy@38 { + compatible = "exynos4210-hdmiphy"; + reg = <0x38>; + }; + }; - spi_2: spi@13940000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x13940000 0x100>; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&pdma0 9>, <&pdma0 8>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>; - clock-names = "spi", "spi_busclk0"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_bus>; - status = "disabled"; - }; + spi_0: spi@13920000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13920000 0x100>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&pdma0 7>, <&pdma0 6>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + status = "disabled"; + }; - pwm: pwm@139d0000 { - compatible = "samsung,exynos4210-pwm"; - reg = <0x139D0000 0x1000>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PWM>; - clock-names = "timers"; - #pwm-cells = <3>; - status = "disabled"; - }; + spi_1: spi@13930000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13930000 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&pdma1 7>, <&pdma1 6>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + status = "disabled"; + }; - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; + spi_2: spi@13940000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13940000 0x100>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&pdma0 9>, <&pdma0 8>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_bus>; + status = "disabled"; + }; - pdma0: pdma@12680000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12680000 0x1000>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@12690000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12690000 0x1000>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - mdma1: mdma@12850000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12850000 0x1000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_MDMA>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; + pwm: pwm@139d0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x139D0000 0x1000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PWM>; + clock-names = "timers"; + #pwm-cells = <3>; + status = "disabled"; }; - }; - fimd: fimd@11c00000 { - compatible = "samsung,exynos4210-fimd"; - interrupt-parent = <&combiner>; - reg = <0x11c00000 0x20000>; - interrupt-names = "fifo", "vsync", "lcd_sys"; - interrupts = <11 0>, <11 1>, <11 2>; - clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>; - clock-names = "sclk_fimd", "fimd"; - power-domains = <&pd_lcd0>; - iommus = <&sysmmu_fimd0>; - samsung,sysreg = <&sys_reg>; - status = "disabled"; - }; + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12680000 0x1000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@12690000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12690000 0x1000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + mdma1: mdma@12850000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12850000 0x1000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_MDMA>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + }; - tmu: tmu@100c0000 { - #include "exynos4412-tmu-sensor-conf.dtsi" - }; + fimd: fimd@11c00000 { + compatible = "samsung,exynos4210-fimd"; + interrupt-parent = <&combiner>; + reg = <0x11c00000 0x20000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <11 0>, <11 1>, <11 2>; + clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>; + clock-names = "sclk_fimd", "fimd"; + power-domains = <&pd_lcd0>; + iommus = <&sysmmu_fimd0>; + samsung,sysreg = <&sys_reg>; + status = "disabled"; + }; - jpeg_codec: jpeg-codec@11840000 { - compatible = "samsung,exynos4210-jpeg"; - reg = <0x11840000 0x1000>; - interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_JPEG>; - clock-names = "jpeg"; - power-domains = <&pd_cam>; - iommus = <&sysmmu_jpeg>; - }; + tmu: tmu@100c0000 { + interrupt-parent = <&combiner>; + reg = <0x100C0000 0x100>; + interrupts = <2 4>; + status = "disabled"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; - rotator: rotator@12810000 { - compatible = "samsung,exynos4210-rotator"; - reg = <0x12810000 0x64>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_ROTATOR>; - clock-names = "rotator"; - iommus = <&sysmmu_rotator>; - }; + jpeg_codec: jpeg-codec@11840000 { + compatible = "samsung,exynos4210-jpeg"; + reg = <0x11840000 0x1000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_JPEG>; + clock-names = "jpeg"; + power-domains = <&pd_cam>; + iommus = <&sysmmu_jpeg>; + }; - hdmi: hdmi@12d00000 { - compatible = "samsung,exynos4210-hdmi"; - reg = <0x12D00000 0x70000>; - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", - "mout_hdmi"; - clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, - <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, - <&clock CLK_MOUT_HDMI>; - phy = <&hdmi_i2c_phy>; - power-domains = <&pd_tv>; - samsung,syscon-phandle = <&pmu_system_controller>; - #sound-dai-cells = <0>; - status = "disabled"; - }; + rotator: rotator@12810000 { + compatible = "samsung,exynos4210-rotator"; + reg = <0x12810000 0x64>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_ROTATOR>; + clock-names = "rotator"; + iommus = <&sysmmu_rotator>; + }; - hdmicec: cec@100b0000 { - compatible = "samsung,s5p-cec"; - reg = <0x100B0000 0x200>; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_HDMI_CEC>; - clock-names = "hdmicec"; - samsung,syscon-phandle = <&pmu_system_controller>; - hdmi-phandle = <&hdmi>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; - status = "disabled"; - }; + hdmi: hdmi@12d00000 { + compatible = "samsung,exynos4210-hdmi"; + reg = <0x12D00000 0x70000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", + "sclk_hdmiphy", "mout_hdmi"; + clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, + <&clock CLK_SCLK_PIXEL>, + <&clock CLK_SCLK_HDMIPHY>, + <&clock CLK_MOUT_HDMI>; + phy = <&hdmi_i2c_phy>; + power-domains = <&pd_tv>; + samsung,syscon-phandle = <&pmu_system_controller>; + #sound-dai-cells = <0>; + status = "disabled"; + }; - mixer: mixer@12c10000 { - compatible = "samsung,exynos4210-mixer"; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x12C10000 0x2100>, <0x12c00000 0x300>; - power-domains = <&pd_tv>; - iommus = <&sysmmu_tv>; - status = "disabled"; - }; + hdmicec: cec@100b0000 { + compatible = "samsung,s5p-cec"; + reg = <0x100B0000 0x200>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_HDMI_CEC>; + clock-names = "hdmicec"; + samsung,syscon-phandle = <&pmu_system_controller>; + hdmi-phandle = <&hdmi>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "disabled"; + }; - ppmu_dmc0: ppmu_dmc0@106a0000 { - compatible = "samsung,exynos-ppmu"; - reg = <0x106a0000 0x2000>; - clocks = <&clock CLK_PPMUDMC0>; - clock-names = "ppmu"; - status = "disabled"; - }; + mixer: mixer@12c10000 { + compatible = "samsung,exynos4210-mixer"; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x12C10000 0x2100>, <0x12c00000 0x300>; + power-domains = <&pd_tv>; + iommus = <&sysmmu_tv>; + status = "disabled"; + }; - ppmu_dmc1: ppmu_dmc1@106b0000 { - compatible = "samsung,exynos-ppmu"; - reg = <0x106b0000 0x2000>; - clocks = <&clock CLK_PPMUDMC1>; - clock-names = "ppmu"; - status = "disabled"; - }; + ppmu_dmc0: ppmu_dmc0@106a0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x106a0000 0x2000>; + clocks = <&clock CLK_PPMUDMC0>; + clock-names = "ppmu"; + status = "disabled"; + }; - ppmu_cpu: ppmu_cpu@106c0000 { - compatible = "samsung,exynos-ppmu"; - reg = <0x106c0000 0x2000>; - clocks = <&clock CLK_PPMUCPU>; - clock-names = "ppmu"; - status = "disabled"; - }; + ppmu_dmc1: ppmu_dmc1@106b0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x106b0000 0x2000>; + clocks = <&clock CLK_PPMUDMC1>; + clock-names = "ppmu"; + status = "disabled"; + }; - ppmu_acp: ppmu_acp@10ae0000 { - compatible = "samsung,exynos-ppmu"; - reg = <0x106e0000 0x2000>; - status = "disabled"; - }; + ppmu_cpu: ppmu_cpu@106c0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x106c0000 0x2000>; + clocks = <&clock CLK_PPMUCPU>; + clock-names = "ppmu"; + status = "disabled"; + }; - ppmu_rightbus: ppmu_rightbus@112a0000 { - compatible = "samsung,exynos-ppmu"; - reg = <0x112a0000 0x2000>; - clocks = <&clock CLK_PPMURIGHT>; - clock-names = "ppmu"; - status = "disabled"; - }; + ppmu_rightbus: ppmu_rightbus@112a0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x112a0000 0x2000>; + clocks = <&clock CLK_PPMURIGHT>; + clock-names = "ppmu"; + status = "disabled"; + }; - ppmu_leftbus: ppmu_leftbus0@116a0000 { - compatible = "samsung,exynos-ppmu"; - reg = <0x116a0000 0x2000>; - clocks = <&clock CLK_PPMULEFT>; - clock-names = "ppmu"; - status = "disabled"; - }; + ppmu_leftbus: ppmu_leftbus0@116a0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x116a0000 0x2000>; + clocks = <&clock CLK_PPMULEFT>; + clock-names = "ppmu"; + status = "disabled"; + }; - ppmu_camif: ppmu_camif@11ac0000 { - compatible = "samsung,exynos-ppmu"; - reg = <0x11ac0000 0x2000>; - clocks = <&clock CLK_PPMUCAMIF>; - clock-names = "ppmu"; - status = "disabled"; - }; + ppmu_camif: ppmu_camif@11ac0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x11ac0000 0x2000>; + clocks = <&clock CLK_PPMUCAMIF>; + clock-names = "ppmu"; + status = "disabled"; + }; - ppmu_lcd0: ppmu_lcd0@11e40000 { - compatible = "samsung,exynos-ppmu"; - reg = <0x11e40000 0x2000>; - clocks = <&clock CLK_PPMULCD0>; - clock-names = "ppmu"; - status = "disabled"; - }; + ppmu_lcd0: ppmu_lcd0@11e40000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x11e40000 0x2000>; + clocks = <&clock CLK_PPMULCD0>; + clock-names = "ppmu"; + status = "disabled"; + }; - ppmu_fsys: ppmu_g3d@12630000 { - compatible = "samsung,exynos-ppmu"; - reg = <0x12630000 0x2000>; - status = "disabled"; - }; + ppmu_fsys: ppmu_g3d@12630000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x12630000 0x2000>; + status = "disabled"; + }; - ppmu_image: ppmu_image@12aa0000 { - compatible = "samsung,exynos-ppmu"; - reg = <0x12aa0000 0x2000>; - clocks = <&clock CLK_PPMUIMAGE>; - clock-names = "ppmu"; - status = "disabled"; - }; + ppmu_image: ppmu_image@12aa0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x12aa0000 0x2000>; + clocks = <&clock CLK_PPMUIMAGE>; + clock-names = "ppmu"; + status = "disabled"; + }; - ppmu_tv: ppmu_tv@12e40000 { - compatible = "samsung,exynos-ppmu"; - reg = <0x12e40000 0x2000>; - clocks = <&clock CLK_PPMUTV>; - clock-names = "ppmu"; - status = "disabled"; - }; + ppmu_tv: ppmu_tv@12e40000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x12e40000 0x2000>; + clocks = <&clock CLK_PPMUTV>; + clock-names = "ppmu"; + status = "disabled"; + }; - ppmu_g3d: ppmu_g3d@13220000 { - compatible = "samsung,exynos-ppmu"; - reg = <0x13220000 0x2000>; - clocks = <&clock CLK_PPMUG3D>; - clock-names = "ppmu"; - status = "disabled"; - }; + ppmu_g3d: ppmu_g3d@13220000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x13220000 0x2000>; + clocks = <&clock CLK_PPMUG3D>; + clock-names = "ppmu"; + status = "disabled"; + }; - ppmu_mfc_left: ppmu_mfc_left@13660000 { - compatible = "samsung,exynos-ppmu"; - reg = <0x13660000 0x2000>; - clocks = <&clock CLK_PPMUMFC_L>; - clock-names = "ppmu"; - status = "disabled"; - }; + ppmu_mfc_left: ppmu_mfc_left@13660000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x13660000 0x2000>; + clocks = <&clock CLK_PPMUMFC_L>; + clock-names = "ppmu"; + status = "disabled"; + }; - ppmu_mfc_right: ppmu_mfc_right@13670000 { - compatible = "samsung,exynos-ppmu"; - reg = <0x13670000 0x2000>; - clocks = <&clock CLK_PPMUMFC_R>; - clock-names = "ppmu"; - status = "disabled"; - }; + ppmu_mfc_right: ppmu_mfc_right@13670000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x13670000 0x2000>; + clocks = <&clock CLK_PPMUMFC_R>; + clock-names = "ppmu"; + status = "disabled"; + }; - sysmmu_mfc_l: sysmmu@13620000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13620000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <5 5>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>; - power-domains = <&pd_mfc>; - #iommu-cells = <0>; - }; + sysmmu_mfc_l: sysmmu@13620000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13620000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 5>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>; + power-domains = <&pd_mfc>; + #iommu-cells = <0>; + }; - sysmmu_mfc_r: sysmmu@13630000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13630000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <5 6>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>; - power-domains = <&pd_mfc>; - #iommu-cells = <0>; - }; + sysmmu_mfc_r: sysmmu@13630000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13630000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 6>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>; + power-domains = <&pd_mfc>; + #iommu-cells = <0>; + }; - sysmmu_tv: sysmmu@12e20000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x12E20000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <5 4>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>; - power-domains = <&pd_tv>; - #iommu-cells = <0>; - }; + sysmmu_tv: sysmmu@12e20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12E20000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 4>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>; + power-domains = <&pd_tv>; + #iommu-cells = <0>; + }; - sysmmu_fimc0: sysmmu@11a20000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11A20000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <4 2>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_FIMC0>, <&clock CLK_FIMC0>; - power-domains = <&pd_cam>; - #iommu-cells = <0>; - }; + sysmmu_fimc0: sysmmu@11a20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11A20000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMC0>, <&clock CLK_FIMC0>; + power-domains = <&pd_cam>; + #iommu-cells = <0>; + }; - sysmmu_fimc1: sysmmu@11a30000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11A30000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <4 3>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_FIMC1>, <&clock CLK_FIMC1>; - power-domains = <&pd_cam>; - #iommu-cells = <0>; - }; + sysmmu_fimc1: sysmmu@11a30000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11A30000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 3>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMC1>, <&clock CLK_FIMC1>; + power-domains = <&pd_cam>; + #iommu-cells = <0>; + }; - sysmmu_fimc2: sysmmu@11a40000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11A40000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <4 4>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_FIMC2>, <&clock CLK_FIMC2>; - power-domains = <&pd_cam>; - #iommu-cells = <0>; - }; + sysmmu_fimc2: sysmmu@11a40000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11A40000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 4>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMC2>, <&clock CLK_FIMC2>; + power-domains = <&pd_cam>; + #iommu-cells = <0>; + }; - sysmmu_fimc3: sysmmu@11a50000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11A50000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <4 5>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_FIMC3>, <&clock CLK_FIMC3>; - power-domains = <&pd_cam>; - #iommu-cells = <0>; - }; + sysmmu_fimc3: sysmmu@11a50000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11A50000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 5>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMC3>, <&clock CLK_FIMC3>; + power-domains = <&pd_cam>; + #iommu-cells = <0>; + }; - sysmmu_jpeg: sysmmu@11a60000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11A60000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <4 6>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>; - power-domains = <&pd_cam>; - #iommu-cells = <0>; - }; + sysmmu_jpeg: sysmmu@11a60000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11A60000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 6>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>; + power-domains = <&pd_cam>; + #iommu-cells = <0>; + }; - sysmmu_rotator: sysmmu@12a30000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x12A30000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <5 0>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>; - #iommu-cells = <0>; - }; + sysmmu_rotator: sysmmu@12a30000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12A30000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_ROTATOR>, + <&clock CLK_ROTATOR>; + #iommu-cells = <0>; + }; - sysmmu_fimd0: sysmmu@11e20000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11E20000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <5 2>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_FIMD0>, <&clock CLK_FIMD0>; - power-domains = <&pd_lcd0>; - #iommu-cells = <0>; - }; + sysmmu_fimd0: sysmmu@11e20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11E20000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMD0>, <&clock CLK_FIMD0>; + power-domains = <&pd_lcd0>; + #iommu-cells = <0>; + }; - sss: sss@10830000 { - compatible = "samsung,exynos4210-secss"; - reg = <0x10830000 0x300>; - interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_SSS>; - clock-names = "secss"; - }; + sss: sss@10830000 { + compatible = "samsung,exynos4210-secss"; + reg = <0x10830000 0x300>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_SSS>; + clock-names = "secss"; + }; - prng: rng@10830400 { - compatible = "samsung,exynos4-rng"; - reg = <0x10830400 0x200>; - clocks = <&clock CLK_SSS>; - clock-names = "secss"; + prng: rng@10830400 { + compatible = "samsung,exynos4-rng"; + reg = <0x10830400 0x200>; + clocks = <&clock CLK_SSS>; + clock-names = "secss"; + }; }; }; diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index dbe6c052d8c16..520c5934a8d43 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -13,853 +13,851 @@ #include <dt-bindings/pinctrl/samsung.h> -/ { - pinctrl@11400000 { - gpa0: gpa0 { - gpio-controller; - #gpio-cells = <2>; +&pinctrl_0 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe2: gpe2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe3: gpe3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe4: gpe4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + uart_audio_a: uart-audio-a { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + uart_audio_b: uart-audio-b { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpb-0", "gpb-2", "gpb-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpb-2", "gpb-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpb-4", "gpb-6", "gpb-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + i2c5_bus: i2c5-bus { + samsung,pins = "gpb-6", "gpb-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + ac97_bus: ac97-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + spdif_bus: spdif-bus { + samsung,pins = "gpc1-0", "gpc1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + i2c6_bus: i2c6-bus { + samsung,pins = "gpc1-3", "gpc1-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_5>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + i2c7_bus: i2c7-bus { + samsung,pins = "gpd0-2", "gpd0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + lcd_ctrl: lcd-ctrl { + samsung,pins = "gpd0-0", "gpd0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + lcd_sync: lcd-sync { + samsung,pins = "gpf0-0", "gpf0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + lcd_en: lcd-en { + samsung,pins = "gpe3-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + lcd_clk: lcd-clk { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + lcd_data16: lcd-data-width16 { + samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2", + "gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0", + "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + lcd_data18: lcd-data-width18 { + samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1", + "gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1", + "gpf3-2", "gpf3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + lcd_data24: lcd-data-width24 { + samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3", + "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; +}; + +&pinctrl_1 { + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk3: gpk3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl1: gpl1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl2: gpl2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; - gpa1: gpa1 { - gpio-controller; - #gpio-cells = <2>; + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; - gpb: gpb { - gpio-controller; - #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; - interrupt-controller; - #interrupt-cells = <2>; - }; + sd0_clk: sd0-clk { + samsung,pins = "gpk0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; - gpc0: gpc0 { - gpio-controller; - #gpio-cells = <2>; + sd0_cmd: sd0-cmd { + samsung,pins = "gpk0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpk0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpk0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd4_clk: sd4-clk { + samsung,pins = "gpk0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd4_cmd: sd4-cmd { + samsung,pins = "gpk0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd4_cd: sd4-cd { + samsung,pins = "gpk0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd4_bus1: sd4-bus-width1 { + samsung,pins = "gpk0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd4_bus4: sd4-bus-width4 { + samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd4_bus8: sd4-bus-width8 { + samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpk1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpk1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpk1-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpk1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpk2-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpk2-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpk2-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpk2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd2_bus8: sd2-bus-width8 { + samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd3_clk: sd3-clk { + samsung,pins = "gpk3-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd3_cmd: sd3-cmd { + samsung,pins = "gpk3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd3_cd: sd3-cd { + samsung,pins = "gpk3-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd3_bus1: sd3-bus-width1 { + samsung,pins = "gpk3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd3_bus4: sd3-bus-width4 { + samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + eint0: ext-int0 { + samsung,pins = "gpx0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + eint8: ext-int8 { + samsung,pins = "gpx1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + eint15: ext-int15 { + samsung,pins = "gpx1-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + eint16: ext-int16 { + samsung,pins = "gpx2-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + eint31: ext-int31 { + samsung,pins = "gpx3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + cam_port_a_io: cam-port-a-io { + samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3", + "gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7", + "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + cam_port_a_clk_active: cam-port-a-clk-active { + samsung,pins = "gpj1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + cam_port_a_clk_idle: cam-port-a-clk-idle { + samsung,pins = "gpj1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + hdmi_cec: hdmi-cec { + samsung,pins = "gpx3-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; +}; + +&pinctrl_2 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + }; + + i2s0_bus: i2s0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4", "gpz-5", "gpz-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpc1: gpc1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpd0: gpd0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpd1: gpd1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpe0: gpe0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpe1: gpe1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpe2: gpe2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpe3: gpe3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpe4: gpe4 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpf0: gpf0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpf1: gpf1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpf2: gpf2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpf3: gpf3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - uart0_data: uart0-data { - samsung,pins = "gpa0-0", "gpa0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart0_fctl: uart0-fctl { - samsung,pins = "gpa0-2", "gpa0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart1_data: uart1-data { - samsung,pins = "gpa0-4", "gpa0-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart1_fctl: uart1-fctl { - samsung,pins = "gpa0-6", "gpa0-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c2_bus: i2c2-bus { - samsung,pins = "gpa0-6", "gpa0-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart2_data: uart2-data { - samsung,pins = "gpa1-0", "gpa1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart2_fctl: uart2-fctl { - samsung,pins = "gpa1-2", "gpa1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart_audio_a: uart-audio-a { - samsung,pins = "gpa1-0", "gpa1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c3_bus: i2c3-bus { - samsung,pins = "gpa1-2", "gpa1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart3_data: uart3-data { - samsung,pins = "gpa1-4", "gpa1-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart_audio_b: uart-audio-b { - samsung,pins = "gpa1-4", "gpa1-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - spi0_bus: spi0-bus { - samsung,pins = "gpb-0", "gpb-2", "gpb-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c4_bus: i2c4-bus { - samsung,pins = "gpb-2", "gpb-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - spi1_bus: spi1-bus { - samsung,pins = "gpb-4", "gpb-6", "gpb-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c5_bus: i2c5-bus { - samsung,pins = "gpb-6", "gpb-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2s1_bus: i2s1-bus { - samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", - "gpc0-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pcm1_bus: pcm1-bus { - samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", - "gpc0-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - ac97_bus: ac97-bus { - samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", - "gpc0-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2s2_bus: i2s2-bus { - samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", - "gpc1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pcm2_bus: pcm2-bus { - samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", - "gpc1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - spdif_bus: spdif-bus { - samsung,pins = "gpc1-0", "gpc1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c6_bus: i2c6-bus { - samsung,pins = "gpc1-3", "gpc1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - spi2_bus: spi2-bus { - samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_5>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c7_bus: i2c7-bus { - samsung,pins = "gpd0-2", "gpd0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c0_bus: i2c0-bus { - samsung,pins = "gpd1-0", "gpd1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c1_bus: i2c1-bus { - samsung,pins = "gpd1-2", "gpd1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pwm0_out: pwm0-out { - samsung,pins = "gpd0-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pwm1_out: pwm1-out { - samsung,pins = "gpd0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pwm2_out: pwm2-out { - samsung,pins = "gpd0-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pwm3_out: pwm3-out { - samsung,pins = "gpd0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - lcd_ctrl: lcd-ctrl { - samsung,pins = "gpd0-0", "gpd0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - lcd_sync: lcd-sync { - samsung,pins = "gpf0-0", "gpf0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - lcd_en: lcd-en { - samsung,pins = "gpe3-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - lcd_clk: lcd-clk { - samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - lcd_data16: lcd-data-width16 { - samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2", - "gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0", - "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7", - "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - lcd_data18: lcd-data-width18 { - samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1", - "gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7", - "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", - "gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1", - "gpf3-2", "gpf3-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - lcd_data24: lcd-data-width24 { - samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7", - "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3", - "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7", - "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", - "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7", - "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - }; - - pinctrl@11000000 { - gpj0: gpj0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpj1: gpj1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpk0: gpk0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpk1: gpk1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpk2: gpk2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpk3: gpk3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpl0: gpl0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpl1: gpl1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpl2: gpl2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpy0: gpy0 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy1: gpy1 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy2: gpy2 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy3: gpy3 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy4: gpy4 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy5: gpy5 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy6: gpy6 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpx0: gpx0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <2>; - }; - - gpx1: gpx1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <2>; - }; - - gpx2: gpx2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpx3: gpx3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - sd0_clk: sd0-clk { - samsung,pins = "gpk0-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_cmd: sd0-cmd { - samsung,pins = "gpk0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_cd: sd0-cd { - samsung,pins = "gpk0-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_bus1: sd0-bus-width1 { - samsung,pins = "gpk0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_bus4: sd0-bus-width4 { - samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_bus8: sd0-bus-width8 { - samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd4_clk: sd4-clk { - samsung,pins = "gpk0-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd4_cmd: sd4-cmd { - samsung,pins = "gpk0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd4_cd: sd4-cd { - samsung,pins = "gpk0-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd4_bus1: sd4-bus-width1 { - samsung,pins = "gpk0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd4_bus4: sd4-bus-width4 { - samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd4_bus8: sd4-bus-width8 { - samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd1_clk: sd1-clk { - samsung,pins = "gpk1-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd1_cmd: sd1-cmd { - samsung,pins = "gpk1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd1_cd: sd1-cd { - samsung,pins = "gpk1-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd1_bus1: sd1-bus-width1 { - samsung,pins = "gpk1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd1_bus4: sd1-bus-width4 { - samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_clk: sd2-clk { - samsung,pins = "gpk2-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_cmd: sd2-cmd { - samsung,pins = "gpk2-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_cd: sd2-cd { - samsung,pins = "gpk2-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_bus1: sd2-bus-width1 { - samsung,pins = "gpk2-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_bus4: sd2-bus-width4 { - samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_bus8: sd2-bus-width8 { - samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd3_clk: sd3-clk { - samsung,pins = "gpk3-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd3_cmd: sd3-cmd { - samsung,pins = "gpk3-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd3_cd: sd3-cd { - samsung,pins = "gpk3-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd3_bus1: sd3-bus-width1 { - samsung,pins = "gpk3-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd3_bus4: sd3-bus-width4 { - samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - eint0: ext-int0 { - samsung,pins = "gpx0-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - eint8: ext-int8 { - samsung,pins = "gpx1-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - eint15: ext-int15 { - samsung,pins = "gpx1-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - eint16: ext-int16 { - samsung,pins = "gpx2-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - eint31: ext-int31 { - samsung,pins = "gpx3-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - cam_port_a_io: cam-port-a-io { - samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3", - "gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7", - "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - cam_port_a_clk_active: cam-port-a-clk-active { - samsung,pins = "gpj1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - cam_port_a_clk_idle: cam-port-a-clk-idle { - samsung,pins = "gpj1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - hdmi_cec: hdmi-cec { - samsung,pins = "gpx3-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - }; - - pinctrl@3860000 { - gpz: gpz { - gpio-controller; - #gpio-cells = <2>; - }; - - i2s0_bus: i2s0-bus { - samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", - "gpz-4", "gpz-5", "gpz-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pcm0_bus: pcm0-bus { - samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", - "gpz-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; + pcm0_bus: pcm0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; }; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index aaade17b140e9..eaeeb4f6b84ab 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -148,43 +148,12 @@ }; }; - camera { - pinctrl-names = "default"; - pinctrl-0 = <>; - status = "okay"; - - fimc_0: fimc@11800000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC0>, - <&clock CLK_SCLK_FIMC0>; - assigned-clock-parents = <&clock CLK_SCLK_MPLL>; - assigned-clock-rates = <0>, <160000000>; - }; - - fimc_1: fimc@11810000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC1>, - <&clock CLK_SCLK_FIMC1>; - assigned-clock-parents = <&clock CLK_SCLK_MPLL>; - assigned-clock-rates = <0>, <160000000>; - }; - - fimc_2: fimc@11820000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC2>, - <&clock CLK_SCLK_FIMC2>; - assigned-clock-parents = <&clock CLK_SCLK_MPLL>; - assigned-clock-rates = <0>, <160000000>; - }; +}; - fimc_3: fimc@11830000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC3>, - <&clock CLK_SCLK_FIMC3>; - assigned-clock-parents = <&clock CLK_SCLK_MPLL>; - assigned-clock-rates = <0>, <160000000>; - }; - }; +&camera { + pinctrl-names = "default"; + pinctrl-0 = <>; + status = "okay"; }; &cpu0 { @@ -234,6 +203,38 @@ vbus-supply = <&safe1_sreg>; }; +&fimc_0 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC0>, + <&clock CLK_SCLK_FIMC0>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimc_1 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC1>, + <&clock CLK_SCLK_FIMC1>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimc_2 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC2>, + <&clock CLK_SCLK_FIMC2>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimc_3 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC3>, + <&clock CLK_SCLK_FIMC3>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + &fimd { status = "okay"; }; @@ -275,6 +276,7 @@ max8997_pmic@66 { compatible = "maxim,max8997-pmic"; + interrupts-extended = <&gpx0 7 0>, <&gpx2 3 0>; reg = <0x66>; interrupt-parent = <&gpx0>; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 21fff7cd3aa49..4e6ff97e1ec41 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -28,24 +28,6 @@ stdout-path = &serial_2; }; - sysram@2020000 { - smp-sysram@0 { - status = "disabled"; - }; - - smp-sysram@5000 { - compatible = "samsung,exynos4210-sysram"; - reg = <0x5000 0x1000>; - }; - - smp-sysram@1f000 { - status = "disabled"; - }; - }; - - mct@10050000 { - compatible = "none"; - }; fixed-rate-clocks { xxti { @@ -173,45 +155,6 @@ }; }; - camera { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <>; - - fimc_0: fimc@11800000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC0>, - <&clock CLK_SCLK_FIMC0>; - assigned-clock-parents = <&clock CLK_SCLK_MPLL>; - assigned-clock-rates = <0>, <160000000>; - }; - - fimc_1: fimc@11810000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC1>, - <&clock CLK_SCLK_FIMC1>; - assigned-clock-parents = <&clock CLK_SCLK_MPLL>; - assigned-clock-rates = <0>, <160000000>; - }; - - fimc_2: fimc@11820000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC2>, - <&clock CLK_SCLK_FIMC2>; - assigned-clock-parents = <&clock CLK_SCLK_MPLL>; - assigned-clock-rates = <0>, <160000000>; - }; - - fimc_3: fimc@11830000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC3>, - <&clock CLK_SCLK_FIMC3>; - assigned-clock-parents = <&clock CLK_SCLK_MPLL>; - assigned-clock-rates = <0>, <160000000>; - }; - }; - hdmi_en: voltage-regulator-hdmi-5v { compatible = "regulator-fixed"; regulator-name = "HDMI_5V"; @@ -234,6 +177,13 @@ }; }; +&camera { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + &cpu0 { cpu0-supply = <&vdd_arm_reg>; }; @@ -250,6 +200,38 @@ vbus-supply = <&safeout1_reg>; }; +&fimc_0 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC0>, + <&clock CLK_SCLK_FIMC0>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimc_1 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC1>, + <&clock CLK_SCLK_FIMC1>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimc_2 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC2>, + <&clock CLK_SCLK_FIMC2>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimc_3 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC3>, + <&clock CLK_SCLK_FIMC3>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + &fimd { pinctrl-0 = <&lcd_clk>, <&lcd_data24>; pinctrl-names = "default"; @@ -501,6 +483,10 @@ status = "okay"; }; +&mct { + compatible = "none"; +}; + &mdma1 { reg = <0x12840000 0x1000>; }; @@ -579,3 +565,18 @@ /delete-property/dmas; /delete-property/dma-names; }; + +&sysram { + smp-sysram@0 { + status = "disabled"; + }; + + smp-sysram@5000 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x5000 0x1000>; + }; + + smp-sysram@1f000 { + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index cc978cf282675..88fb47cef9a8f 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -17,7 +17,6 @@ */ #include "exynos4.dtsi" -#include "exynos4210-pinctrl.dtsi" #include "exynos4-cpu-thermal.dtsi" / { @@ -49,8 +48,6 @@ 400000 975000 200000 950000 >; - cooling-min-level = <4>; - cooling-max-level = <2>; #cooling-cells = <2>; /* min followed by max */ }; @@ -61,365 +58,323 @@ }; }; - sysram: sysram@2020000 { - compatible = "mmio-sram"; - reg = <0x02020000 0x20000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x02020000 0x20000>; + soc: soc { + sysram: sysram@2020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x20000>; - smp-sysram@0 { - compatible = "samsung,exynos4210-sysram"; - reg = <0x0 0x1000>; - }; + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; - smp-sysram@1f000 { - compatible = "samsung,exynos4210-sysram-ns"; - reg = <0x1f000 0x1000>; + smp-sysram@1f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x1f000 0x1000>; + }; }; - }; - pd_lcd1: lcd1-power-domain@10023ca0 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10023CA0 0x20>; - #power-domain-cells = <0>; - label = "LCD1"; - }; + pd_lcd1: lcd1-power-domain@10023ca0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CA0 0x20>; + #power-domain-cells = <0>; + label = "LCD1"; + }; - l2c: l2-cache-controller@10502000 { - compatible = "arm,pl310-cache"; - reg = <0x10502000 0x1000>; - cache-unified; - cache-level = <2>; - arm,tag-latency = <2 2 1>; - arm,data-latency = <2 2 1>; - }; + l2c: l2-cache-controller@10502000 { + compatible = "arm,pl310-cache"; + reg = <0x10502000 0x1000>; + cache-unified; + cache-level = <2>; + arm,tag-latency = <2 2 1>; + arm,data-latency = <2 2 1>; + }; - mct: mct@10050000 { - compatible = "samsung,exynos4210-mct"; - reg = <0x10050000 0x800>; - interrupt-parent = <&mct_map>; - interrupts = <0>, <1>, <2>, <3>, <4>, <5>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; - clock-names = "fin_pll", "mct"; - - mct_map: mct-map { - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, + mct: mct@10050000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x10050000 0x800>; + interrupt-parent = <&mct_map>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = + <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, <1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>, <2 &combiner 12 6>, <3 &combiner 12 7>, <4 &gic 0 42 IRQ_TYPE_LEVEL_HIGH>, <5 &gic 0 48 IRQ_TYPE_LEVEL_HIGH>; + }; }; - }; - watchdog: watchdog@10060000 { - compatible = "samsung,s3c6410-wdt"; - reg = <0x10060000 0x100>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_WDT>; - clock-names = "watchdog"; - }; - - clock: clock-controller@10030000 { - compatible = "samsung,exynos4210-clock"; - reg = <0x10030000 0x20000>; - #clock-cells = <1>; - }; - - pinctrl_0: pinctrl@11400000 { - compatible = "samsung,exynos4210-pinctrl"; - reg = <0x11400000 0x1000>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; - }; - - pinctrl_1: pinctrl@11000000 { - compatible = "samsung,exynos4210-pinctrl"; - reg = <0x11000000 0x1000>; - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - - wakup_eint: wakeup-interrupt-controller { - compatible = "samsung,exynos4210-wakeup-eint"; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + watchdog: watchdog@10060000 { + compatible = "samsung,s3c6410-wdt"; + reg = <0x10060000 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_WDT>; + clock-names = "watchdog"; }; - }; - pinctrl_2: pinctrl@3860000 { - compatible = "samsung,exynos4210-pinctrl"; - reg = <0x03860000 0x1000>; - }; + clock: clock-controller@10030000 { + compatible = "samsung,exynos4210-clock"; + reg = <0x10030000 0x20000>; + #clock-cells = <1>; + }; - tmu: tmu@100c0000 { - compatible = "samsung,exynos4210-tmu"; - interrupt-parent = <&combiner>; - reg = <0x100C0000 0x100>; - interrupts = <2 4>; - clocks = <&clock CLK_TMU_APBIF>; - clock-names = "tmu_apbif"; - samsung,tmu_gain = <15>; - samsung,tmu_reference_voltage = <7>; - status = "disabled"; - }; + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,exynos4210-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tmu 0>; + pinctrl_1: pinctrl@11000000 { + compatible = "samsung,exynos4210-pinctrl"; + reg = <0x11000000 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - trips { - cpu_alert0: cpu-alert-0 { - temperature = <85000>; /* millicelsius */ - }; - cpu_alert1: cpu-alert-1 { - temperature = <100000>; /* millicelsius */ - }; - cpu_alert2: cpu-alert-2 { - temperature = <110000>; /* millicelsius */ - }; + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; }; - }; - - g2d: g2d@12800000 { - compatible = "samsung,s5pv210-g2d"; - reg = <0x12800000 0x1000>; - interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; - clock-names = "sclk_fimg2d", "fimg2d"; - power-domains = <&pd_lcd0>; - iommus = <&sysmmu_g2d>; - }; - camera { - clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>, - <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>; - clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; + pinctrl_2: pinctrl@3860000 { + compatible = "samsung,exynos4210-pinctrl"; + reg = <0x03860000 0x1000>; + }; - fimc_0: fimc@11800000 { - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,cam-if; + g2d: g2d@12800000 { + compatible = "samsung,s5pv210-g2d"; + reg = <0x12800000 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; + clock-names = "sclk_fimg2d", "fimg2d"; + power-domains = <&pd_lcd0>; + iommus = <&sysmmu_g2d>; }; - fimc_1: fimc@11810000 { - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,cam-if; + ppmu_acp: ppmu_acp@10ae0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x10ae0000 0x2000>; + status = "disabled"; }; - fimc_2: fimc@11820000 { - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,lcd-wb; + ppmu_lcd1: ppmu_lcd1@12240000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x12240000 0x2000>; + clocks = <&clock CLK_PPMULCD1>; + clock-names = "ppmu"; + status = "disabled"; }; - fimc_3: fimc@11830000 { - samsung,pix-limits = <1920 8192 1366 1920>; - samsung,rotators = <0>; - samsung,mainscaler-ext; - samsung,lcd-wb; + sysmmu_g2d: sysmmu@12a20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12A20000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 7>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; + power-domains = <&pd_lcd0>; + #iommu-cells = <0>; }; - }; - mixer: mixer@12c10000 { - clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer", - "sclk_mixer"; - clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, - <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>, - <&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>; - }; + sysmmu_fimd1: sysmmu@12220000 { + compatible = "samsung,exynos-sysmmu"; + interrupt-parent = <&combiner>; + reg = <0x12220000 0x1000>; + interrupts = <5 3>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>; + power-domains = <&pd_lcd1>; + #iommu-cells = <0>; + }; - ppmu_lcd1: ppmu_lcd1@12240000 { - compatible = "samsung,exynos-ppmu"; - reg = <0x12240000 0x2000>; - clocks = <&clock CLK_PPMULCD1>; - clock-names = "ppmu"; - status = "disabled"; - }; + bus_dmc: bus_dmc { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_DMC>; + clock-names = "bus"; + operating-points-v2 = <&bus_dmc_opp_table>; + status = "disabled"; + }; - sysmmu_g2d: sysmmu@12a20000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x12A20000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <4 7>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; - power-domains = <&pd_lcd0>; - #iommu-cells = <0>; - }; + bus_acp: bus_acp { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_ACP>; + clock-names = "bus"; + operating-points-v2 = <&bus_acp_opp_table>; + status = "disabled"; + }; - sysmmu_fimd1: sysmmu@12220000 { - compatible = "samsung,exynos-sysmmu"; - interrupt-parent = <&combiner>; - reg = <0x12220000 0x1000>; - interrupts = <5 3>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>; - power-domains = <&pd_lcd1>; - #iommu-cells = <0>; - }; + bus_peri: bus_peri { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_ACLK100>; + clock-names = "bus"; + operating-points-v2 = <&bus_peri_opp_table>; + status = "disabled"; + }; - bus_dmc: bus_dmc { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_DMC>; - clock-names = "bus"; - operating-points-v2 = <&bus_dmc_opp_table>; - status = "disabled"; - }; + bus_fsys: bus_fsys { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_ACLK133>; + clock-names = "bus"; + operating-points-v2 = <&bus_fsys_opp_table>; + status = "disabled"; + }; - bus_acp: bus_acp { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_ACP>; - clock-names = "bus"; - operating-points-v2 = <&bus_acp_opp_table>; - status = "disabled"; - }; + bus_display: bus_display { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_ACLK160>; + clock-names = "bus"; + operating-points-v2 = <&bus_display_opp_table>; + status = "disabled"; + }; - bus_peri: bus_peri { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_ACLK100>; - clock-names = "bus"; - operating-points-v2 = <&bus_peri_opp_table>; - status = "disabled"; - }; + bus_lcd0: bus_lcd0 { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_ACLK200>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; - bus_fsys: bus_fsys { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_ACLK133>; - clock-names = "bus"; - operating-points-v2 = <&bus_fsys_opp_table>; - status = "disabled"; - }; + bus_leftbus: bus_leftbus { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_GDL>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; - bus_display: bus_display { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_ACLK160>; - clock-names = "bus"; - operating-points-v2 = <&bus_display_opp_table>; - status = "disabled"; - }; + bus_rightbus: bus_rightbus { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_GDR>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; - bus_lcd0: bus_lcd0 { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_ACLK200>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; + bus_mfc: bus_mfc { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_SCLK_MFC>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; - bus_leftbus: bus_leftbus { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_GDL>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; + bus_dmc_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; - bus_rightbus: bus_rightbus { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_GDR>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; - - bus_mfc: bus_mfc { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_SCLK_MFC>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; + opp-134000000 { + opp-hz = /bits/ 64 <134000000>; + opp-microvolt = <1025000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <1050000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1150000>; + }; + }; - bus_dmc_opp_table: opp_table1 { - compatible = "operating-points-v2"; - opp-shared; + bus_acp_opp_table: opp_table2 { + compatible = "operating-points-v2"; + opp-shared; - opp-134000000 { - opp-hz = /bits/ 64 <134000000>; - opp-microvolt = <1025000>; - }; - opp-267000000 { - opp-hz = /bits/ 64 <267000000>; - opp-microvolt = <1050000>; - }; - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <1150000>; + opp-134000000 { + opp-hz = /bits/ 64 <134000000>; + }; + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + }; + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; }; - }; - bus_acp_opp_table: opp_table2 { - compatible = "operating-points-v2"; - opp-shared; + bus_peri_opp_table: opp_table3 { + compatible = "operating-points-v2"; + opp-shared; - opp-134000000 { - opp-hz = /bits/ 64 <134000000>; - }; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; - }; - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; + opp-5000000 { + opp-hz = /bits/ 64 <5000000>; + }; + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + }; }; - }; - bus_peri_opp_table: opp_table3 { - compatible = "operating-points-v2"; - opp-shared; + bus_fsys_opp_table: opp_table4 { + compatible = "operating-points-v2"; + opp-shared; - opp-5000000 { - opp-hz = /bits/ 64 <5000000>; - }; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; + opp-10000000 { + opp-hz = /bits/ 64 <10000000>; + }; + opp-134000000 { + opp-hz = /bits/ 64 <134000000>; + }; }; - }; - bus_fsys_opp_table: opp_table4 { - compatible = "operating-points-v2"; - opp-shared; + bus_display_opp_table: opp_table5 { + compatible = "operating-points-v2"; + opp-shared; - opp-10000000 { - opp-hz = /bits/ 64 <10000000>; - }; - opp-134000000 { - opp-hz = /bits/ 64 <134000000>; + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + opp-134000000 { + opp-hz = /bits/ 64 <134000000>; + }; + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + }; }; - }; - bus_display_opp_table: opp_table5 { - compatible = "operating-points-v2"; - opp-shared; + bus_leftbus_opp_table: opp_table6 { + compatible = "operating-points-v2"; + opp-shared; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - }; - opp-134000000 { - opp-hz = /bits/ 64 <134000000>; - }; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + }; + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; }; }; - bus_leftbus_opp_table: opp_table6 { - compatible = "operating-points-v2"; - opp-shared; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tmu 0>; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - }; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; - }; - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; + trips { + cpu_alert0: cpu-alert-0 { + temperature = <85000>; /* millicelsius */ + }; + cpu_alert1: cpu-alert-1 { + temperature = <100000>; /* millicelsius */ + }; + cpu_alert2: cpu-alert-2 { + temperature = <110000>; /* millicelsius */ + }; + }; }; }; }; @@ -428,6 +383,12 @@ cpu-offset = <0x8000>; }; +&camera { + clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>, + <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>; + clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; +}; + &combiner { samsung,combiner-nr = <16>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, @@ -448,10 +409,43 @@ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; }; +&fimc_0 { + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,cam-if; +}; + +&fimc_1 { + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,cam-if; +}; + +&fimc_2 { + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,lcd-wb; +}; + +&fimc_3 { + samsung,pix-limits = <1920 8192 1366 1920>; + samsung,rotators = <0>; + samsung,mainscaler-ext; + samsung,lcd-wb; +}; + &mdma1 { power-domains = <&pd_lcd0>; }; +&mixer { + clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer", + "sclk_mixer"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>, + <&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>; +}; + &pmu_system_controller { clock-names = "clkout0", "clkout1", "clkout2", "clkout3", "clkout4", "clkout8", "clkout9"; @@ -468,3 +462,13 @@ &sysmmu_rotator { power-domains = <&pd_lcd0>; }; + +&tmu { + compatible = "samsung,exynos4210-tmu"; + clocks = <&clock CLK_TMU_APBIF>; + clock-names = "tmu_apbif"; + samsung,tmu_gain = <15>; + samsung,tmu_reference_voltage = <7>; +}; + +#include "exynos4210-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi new file mode 100644 index 0000000000000..ee8e1f4453700 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos4412 based Galaxy S3 board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + */ + +/dts-v1/; +#include "exynos4412-midas.dtsi" + +/ { + aliases { + i2c9 = &i2c_ak8975; + i2c10 = &i2c_cm36651; + }; + + regulators { + lcd_vdd3_reg: voltage-regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "LCD_VDD_2.2V"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + ps_als_reg: voltage-regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "LED_A_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; + + i2c_ak8975: i2c-gpio-0 { + compatible = "i2c-gpio"; + gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ak8975@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>; + }; + }; + + i2c_cm36651: i2c-gpio-2 { + compatible = "i2c-gpio"; + gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + cm36651@18 { + compatible = "capella,cm36651"; + reg = <0x18>; + interrupt-parent = <&gpx0>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + vled-supply = <&ps_als_reg>; + }; + }; +}; + +&buck9_reg { + maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; +}; + +&cam_af_reg { + gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&cam_io_reg { + gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&dsi_0 { + status = "okay"; + + panel@0 { + compatible = "samsung,s6e8aa0"; + reg = <0>; + vdd3-supply = <&lcd_vdd3_reg>; + vci-supply = <&ldo25_reg>; + reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>; + power-on-delay= <50>; + reset-delay = <100>; + init-delay = <100>; + flip-horizontal; + flip-vertical; + panel-width-mm = <58>; + panel-height-mm = <103>; + + display-timings { + timing-0 { + clock-frequency = <57153600>; + hactive = <720>; + vactive = <1280>; + hfront-porch = <5>; + hback-porch = <5>; + hsync-len = <5>; + vfront-porch = <13>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + }; +}; + +&i2c_3 { + mms114-touchscreen@48 { + compatible = "melfas,mms114"; + reg = <0x48>; + interrupt-parent = <&gpm2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + x-size = <720>; + y-size = <1280>; + avdd-supply = <&ldo23_reg>; + vdd-supply = <&ldo24_reg>; + }; +}; + +&ldo25_reg { + regulator-name = "LCD_VCC_3.3V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +&s5c73m3 { + standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */ + vdda-supply = <&ldo17_reg>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4412-i9300.dts b/arch/arm/boot/dts/exynos4412-i9300.dts new file mode 100644 index 0000000000000..f8125a945f8dd --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-i9300.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos4412 based M0 (GT-I9300) board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + */ + +/dts-v1/; +#include "exynos4412-galaxy-s3.dtsi" + +/ { + model = "Samsung Galaxy S3 (GT-I9300) based on Exynos4412"; + compatible = "samsung,i9300", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; + + /* bootargs are passed in by bootloader */ + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x40000000>; + }; +}; diff --git a/arch/arm/boot/dts/exynos4412-i9305.dts b/arch/arm/boot/dts/exynos4412-i9305.dts new file mode 100644 index 0000000000000..54a2a55dbf70c --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-i9305.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "exynos4412-galaxy-s3.dtsi" + +/ { + model = "Samsung Galaxy S3 (GT-I9305) based on Exynos4412"; + compatible = "samsung,i9305", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; + + /* bootargs are passed in by bootloader */ + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x80000000>; + }; +}; + +&i2c0_bus { + /* SCL and SDA pins are swapped */ + samsung,pins = "gpd1-1", "gpd1-0"; +}; diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts index a4cd4939fe9a1..0dedeba89b5f4 100644 --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts @@ -116,14 +116,6 @@ compatible = "pwm-beeper"; pwms = <&pwm 0 4000000 PWM_POLARITY_INVERTED>; }; - - camera: camera { - pinctrl-0 = <&cam_port_a_clk_active>; - pinctrl-names = "default"; - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_CAM0>; - assigned-clock-parents = <&clock CLK_XUSBXTI>; - }; }; &adc { @@ -131,6 +123,14 @@ status = "okay"; }; +&camera { + pinctrl-0 = <&cam_port_a_clk_active>; + pinctrl-names = "default"; + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_CAM0>; + assigned-clock-parents = <&clock CLK_XUSBXTI>; +}; + &clock_audss { assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, <&clock_audss EXYNOS_MOUT_I2S>, diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi new file mode 100644 index 0000000000000..76f2b30f17318 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -0,0 +1,1308 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos4412 based Trats 2 board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Samsung's Trats 2 board which is based on + * Samsung's Exynos4412 SoC. + */ + +/dts-v1/; +#include "exynos4412.dtsi" +#include "exynos4412-ppmu-common.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/maxim,max77686.h> +#include <dt-bindings/pinctrl/samsung.h> + +/ { + compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; + + aliases { + i2c11 = &i2c_max77693; + i2c12 = &i2c_max77693_fuel; + }; + + chosen { + stdout-path = &serial_2; + }; + + firmware@204f000 { + compatible = "samsung,secure-firmware"; + reg = <0x0204F000 0x1000>; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti", "fixed-clock"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + cam_io_reg: voltage-regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "CAM_SENSOR_A"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + status = "disabled"; + }; + + cam_af_reg: voltage-regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "CAM_AF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + status = "disabled"; + }; + + vsil12: voltage-regulator-6 { + compatible = "regulator-fixed"; + regulator-name = "VSIL_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&buck7_reg>; + }; + + vcc33mhl: voltage-regulator-7 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3.3_MHL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc18mhl: voltage-regulator-8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8_MHL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-down { + gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; + linux,code = <114>; + label = "volume down"; + debounce-interval = <10>; + }; + + key-up { + gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; + linux,code = <115>; + label = "volume up"; + debounce-interval = <10>; + }; + + key-power { + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; + linux,code = <116>; + label = "power"; + debounce-interval = <10>; + wakeup-source; + }; + + key-ok { + gpios = <&gpx0 1 GPIO_ACTIVE_LOW>; + linux,code = <139>; + label = "ok"; + debounce-interval = <10>; + wakeup-source; + }; + }; + + i2c_max77693: i2c-gpio-1 { + compatible = "i2c-gpio"; + gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + max77693@66 { + compatible = "maxim,max77693"; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reg = <0x66>; + + regulators { + esafeout1_reg: ESAFEOUT1 { + regulator-name = "ESAFEOUT1"; + }; + esafeout2_reg: ESAFEOUT2 { + regulator-name = "ESAFEOUT2"; + }; + charger_reg: CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <60000>; + regulator-max-microamp = <2580000>; + }; + }; + + max77693_haptic { + compatible = "maxim,max77693-haptic"; + haptic-supply = <&ldo26_reg>; + pwms = <&pwm 0 38022 0>; + }; + + charger { + compatible = "maxim,max77693-charger"; + + maxim,constant-microvolt = <4350000>; + maxim,min-system-microvolt = <3600000>; + maxim,thermal-regulation-celsius = <100>; + maxim,battery-overcurrent-microamp = <3500000>; + maxim,charge-input-threshold-microvolt = <4300000>; + }; + }; + }; + + i2c_max77693_fuel: i2c-gpio-3 { + compatible = "i2c-gpio"; + gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + max77693-fuel-gauge@36 { + compatible = "maxim,max17047"; + interrupt-parent = <&gpx2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + reg = <0x36>; + + maxim,over-heat-temp = <700>; + maxim,over-volt = <4500>; + }; + }; + + i2c-mhl { + compatible = "i2c-gpio"; + gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <100>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&i2c_mhl_bus>; + pinctrl-names = "default"; + status = "okay"; + + sii9234: hdmi-bridge@39 { + compatible = "sil,sii9234"; + avcc33-supply = <&vcc33mhl>; + iovcc18-supply = <&vcc18mhl>; + avcc12-supply = <&vsil12>; + cvcc12-supply = <&vsil12>; + reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpf3>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x39>; + + port { + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + }; + }; + + wlan_pwrseq: sdhci3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>; + clocks = <&max77686 MAX77686_CLK_PMIC>; + clock-names = "ext_clock"; + }; + + sound { + compatible = "samsung,trats2-audio"; + samsung,i2s-controller = <&i2s0>; + samsung,model = "Trats2"; + samsung,audio-codec = <&wm1811>; + samsung,audio-routing = + "SPK", "SPKOUTLN", + "SPK", "SPKOUTLP", + "SPK", "SPKOUTRN", + "SPK", "SPKOUTRP"; + }; + + thermistor-ap { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; /* VCC_1.8V_AP */ + pullup-ohm = <100000>; /* 100K */ + pulldown-ohm = <100000>; /* 100K */ + io-channels = <&adc 1>; /* AP temperature */ + }; + + thermistor-battery { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; /* VCC_1.8V_AP */ + pullup-ohm = <100000>; /* 100K */ + pulldown-ohm = <100000>; /* 100K */ + io-channels = <&adc 2>; /* Battery temperature */ + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>; + }; + }; + }; + }; +}; + +&adc { + vdd-supply = <&ldo3_reg>; + status = "okay"; +}; + +&bus_dmc { + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; + vdd-supply = <&buck1_reg>; + status = "okay"; +}; + +&bus_acp { + devfreq = <&bus_dmc>; + status = "okay"; +}; + +&bus_c2c { + devfreq = <&bus_dmc>; + status = "okay"; +}; + +&bus_leftbus { + devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; + vdd-supply = <&buck3_reg>; + status = "okay"; +}; + +&bus_rightbus { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_display { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_fsys { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_peri { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_mfc { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&camera { + pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; + pinctrl-names = "default"; + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_CAM0>, + <&clock CLK_MOUT_CAM1>; + assigned-clock-parents = <&clock CLK_XUSBXTI>, + <&clock CLK_XUSBXTI>; +}; + +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + +&csis_0 { + status = "okay"; + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + assigned-clocks = <&clock CLK_MOUT_CSIS0>, + <&clock CLK_SCLK_CSIS0>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; + + /* Camera C (3) MIPI CSI-2 (CSIS0) */ + port@3 { + reg = <3>; + csis0_ep: endpoint { + remote-endpoint = <&s5c73m3_ep>; + data-lanes = <1 2 3 4>; + samsung,csis-hs-settle = <12>; + }; + }; +}; + +&csis_1 { + status = "okay"; + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + assigned-clocks = <&clock CLK_MOUT_CSIS1>, + <&clock CLK_SCLK_CSIS1>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; + + /* Camera D (4) MIPI CSI-2 (CSIS1) */ + port@4 { + reg = <4>; + csis1_ep: endpoint { + remote-endpoint = <&is_s5k6a3_ep>; + data-lanes = <1>; + samsung,csis-hs-settle = <18>; + samsung,csis-wclk; + }; + }; +}; + +&dsi_0 { + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + samsung,burst-clock-frequency = <500000000>; + samsung,esc-clock-frequency = <20000000>; + samsung,pll-clock-frequency = <24000000>; +}; + +&exynos_usbphy { + vbus-supply = <&esafeout1_reg>; + status = "okay"; +}; + +&fimc_0 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC0>, + <&clock CLK_SCLK_FIMC0>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; + +&fimc_1 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC1>, + <&clock CLK_SCLK_FIMC1>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; + +&fimc_2 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC2>, + <&clock CLK_SCLK_FIMC2>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; + +&fimc_3 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC3>, + <&clock CLK_SCLK_FIMC3>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; + +&fimc_is { + pinctrl-0 = <&fimc_is_uart>; + pinctrl-names = "default"; + status = "okay"; + + }; + +&fimc_lite_0 { + status = "okay"; +}; + +&fimc_lite_1 { + status = "okay"; +}; + +&fimd { + status = "okay"; +}; + +&hdmi { + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; + vdd-supply = <&ldo3_reg>; + vdd_osc-supply = <&ldo4_reg>; + vdd_pll-supply = <&ldo3_reg>; + ddc = <&i2c_5>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + hdmi_to_mhl: endpoint { + remote-endpoint = <&mhl_to_hdmi>; + }; + }; + }; +}; + +&hsotg { + vusb_d-supply = <&ldo15_reg>; + vusb_a-supply = <&ldo12_reg>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&i2c_0 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + status = "okay"; + + s5c73m3: s5c73m3@3c { + compatible = "samsung,s5c73m3"; + reg = <0x3c>; + xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */ + vdd-int-supply = <&buck9_reg>; + vddio-cis-supply = <&ldo9_reg>; + vddio-host-supply = <&ldo18_reg>; + vdd-af-supply = <&cam_af_reg>; + vdd-reg-supply = <&cam_io_reg>; + clock-frequency = <24000000>; + /* CAM_A_CLKOUT */ + clocks = <&camera 0>; + clock-names = "cis_extclk"; + status = "disabled"; + port { + s5c73m3_ep: endpoint { + remote-endpoint = <&csis0_ep>; + data-lanes = <1 2 3 4>; + }; + }; + }; +}; + +&i2c1_isp { + pinctrl-0 = <&fimc_is_i2c1>; + pinctrl-names = "default"; + + s5k6a3@10 { + compatible = "samsung,s5k6a3"; + reg = <0x10>; + svdda-supply = <&cam_io_reg>; + svddio-supply = <&ldo19_reg>; + afvdd-supply = <&ldo19_reg>; + clock-frequency = <24000000>; + /* CAM_B_CLKOUT */ + clocks = <&camera 1>; + clock-names = "extclk"; + samsung,camclk-out = <1>; + gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>; + + port { + is_s5k6a3_ep: endpoint { + remote-endpoint = <&csis1_ep>; + data-lanes = <1>; + }; + }; + }; +}; + +&i2c_3 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c_4 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c4_bus>; + pinctrl-names = "default"; + status = "okay"; + + wm1811: wm1811@1a { + compatible = "wlf,wm1811"; + reg = <0x1a>; + clocks = <&pmu_system_controller 0>; + clock-names = "MCLK1"; + DCVDD-supply = <&ldo3_reg>; + DBVDD1-supply = <&ldo3_reg>; + wlf,ldo1ena = <&gpj0 4 0>; + }; +}; + +&i2c_5 { + status = "okay"; +}; + +&i2c_7 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c7_bus>; + pinctrl-names = "default"; + status = "okay"; + + max77686: max77686_pmic@9 { + compatible = "maxim,max77686"; + interrupt-parent = <&gpx0>; + interrupts = <7 IRQ_TYPE_NONE>; + reg = <0x09>; + #clock-cells = <1>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "VALIVE_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "VM1M2_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo3_reg: LDO3 { + regulator-name = "VCC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VCC_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "VCC_1.8V_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VMPLL_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo7_reg: LDO7 { + regulator-name = "VPLL_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo8_reg: LDO8 { + regulator-name = "VMIPI_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo9_reg: LDO9 { + regulator-name = "CAM_ISP_MIPI_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo10_reg: LDO10 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo11_reg: LDO11 { + regulator-name = "VABB1_1.95V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo12_reg: LDO12 { + regulator-name = "VUOTG_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo13_reg: LDO13 { + regulator-name = "NFC_AVDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "VABB2_1.95V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo15_reg: LDO15 { + regulator-name = "VHSIC_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo16_reg: LDO16 { + regulator-name = "VHSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo17_reg: LDO17 { + regulator-name = "CAM_SENSOR_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo18_reg: LDO18 { + regulator-name = "CAM_ISP_SEN_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo20_reg: LDO20 { + regulator-name = "VDDQ_PRE_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo21_reg: LDO21 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; + }; + + ldo22_reg: LDO22 { + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; + }; + + ldo23_reg: LDO23 { + regulator-name = "TSP_AVDD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo24_reg: LDO24 { + regulator-name = "TSP_VDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo25_reg: LDO25 { + regulator-name = "LDO25"; + }; + + ldo26_reg: LDO26 { + regulator-name = "MOTOR_VCC_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck5_reg: BUCK5 { + regulator-name = "VMEM_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "VCC_SUB_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "VCC_SUB_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "VMEM_VDDF_3.0V"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; + }; + + buck9_reg: BUCK9 { + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; +}; + +&i2c_8 { + status = "okay"; +}; + +&i2s0 { + pinctrl-0 = <&i2s0_bus>; + pinctrl-names = "default"; + status = "okay"; +}; + +&mixer { + status = "okay"; +}; + +&mshc_0 { + broken-cd; + non-removable; + card-detect-delay = <200>; + vmmc-supply = <&ldo22_reg>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <0>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; + pinctrl-names = "default"; + status = "okay"; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&pmu_system_controller { + assigned-clocks = <&pmu_system_controller 0>; + assigned-clock-parents = <&clock CLK_XUSBXTI>; +}; + +&pinctrl_0 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep0>; + + mhl_int: mhl-int { + samsung,pins = "gpf3-5"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + i2c_mhl_bus: i2c-mhl-bus { + samsung,pins = "gpf0-4", "gpf0-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + sleep0: sleep-states { + PIN_SLP(gpa0-0, INPUT, NONE); + PIN_SLP(gpa0-1, OUT0, NONE); + PIN_SLP(gpa0-2, INPUT, NONE); + PIN_SLP(gpa0-3, INPUT, UP); + PIN_SLP(gpa0-4, INPUT, NONE); + PIN_SLP(gpa0-5, INPUT, DOWN); + PIN_SLP(gpa0-6, INPUT, DOWN); + PIN_SLP(gpa0-7, INPUT, UP); + + PIN_SLP(gpa1-0, INPUT, DOWN); + PIN_SLP(gpa1-1, INPUT, DOWN); + PIN_SLP(gpa1-2, INPUT, DOWN); + PIN_SLP(gpa1-3, INPUT, DOWN); + PIN_SLP(gpa1-4, INPUT, DOWN); + PIN_SLP(gpa1-5, INPUT, DOWN); + + PIN_SLP(gpb-0, INPUT, NONE); + PIN_SLP(gpb-1, INPUT, NONE); + PIN_SLP(gpb-2, INPUT, NONE); + PIN_SLP(gpb-3, INPUT, NONE); + PIN_SLP(gpb-4, INPUT, DOWN); + PIN_SLP(gpb-5, INPUT, UP); + PIN_SLP(gpb-6, INPUT, DOWN); + PIN_SLP(gpb-7, INPUT, DOWN); + + PIN_SLP(gpc0-0, INPUT, DOWN); + PIN_SLP(gpc0-1, INPUT, DOWN); + PIN_SLP(gpc0-2, INPUT, DOWN); + PIN_SLP(gpc0-3, INPUT, DOWN); + PIN_SLP(gpc0-4, INPUT, DOWN); + + PIN_SLP(gpc1-0, INPUT, NONE); + PIN_SLP(gpc1-1, PREV, NONE); + PIN_SLP(gpc1-2, INPUT, NONE); + PIN_SLP(gpc1-3, INPUT, NONE); + PIN_SLP(gpc1-4, INPUT, NONE); + + PIN_SLP(gpd0-0, INPUT, DOWN); + PIN_SLP(gpd0-1, INPUT, DOWN); + PIN_SLP(gpd0-2, INPUT, NONE); + PIN_SLP(gpd0-3, INPUT, NONE); + + PIN_SLP(gpd1-0, INPUT, DOWN); + PIN_SLP(gpd1-1, INPUT, DOWN); + PIN_SLP(gpd1-2, INPUT, NONE); + PIN_SLP(gpd1-3, INPUT, NONE); + + PIN_SLP(gpf0-0, INPUT, NONE); + PIN_SLP(gpf0-1, INPUT, NONE); + PIN_SLP(gpf0-2, INPUT, DOWN); + PIN_SLP(gpf0-3, INPUT, DOWN); + PIN_SLP(gpf0-4, INPUT, NONE); + PIN_SLP(gpf0-5, INPUT, DOWN); + PIN_SLP(gpf0-6, INPUT, NONE); + PIN_SLP(gpf0-7, INPUT, DOWN); + + PIN_SLP(gpf1-0, INPUT, DOWN); + PIN_SLP(gpf1-1, INPUT, DOWN); + PIN_SLP(gpf1-2, INPUT, DOWN); + PIN_SLP(gpf1-3, INPUT, DOWN); + PIN_SLP(gpf1-4, INPUT, NONE); + PIN_SLP(gpf1-5, INPUT, NONE); + PIN_SLP(gpf1-6, INPUT, DOWN); + PIN_SLP(gpf1-7, PREV, NONE); + + PIN_SLP(gpf2-0, PREV, NONE); + PIN_SLP(gpf2-1, INPUT, DOWN); + PIN_SLP(gpf2-2, INPUT, DOWN); + PIN_SLP(gpf2-3, INPUT, DOWN); + PIN_SLP(gpf2-4, INPUT, DOWN); + PIN_SLP(gpf2-5, INPUT, DOWN); + PIN_SLP(gpf2-6, INPUT, NONE); + PIN_SLP(gpf2-7, INPUT, NONE); + + PIN_SLP(gpf3-0, INPUT, NONE); + PIN_SLP(gpf3-1, PREV, NONE); + PIN_SLP(gpf3-2, PREV, NONE); + PIN_SLP(gpf3-3, PREV, NONE); + PIN_SLP(gpf3-4, OUT1, NONE); + PIN_SLP(gpf3-5, INPUT, DOWN); + + PIN_SLP(gpj0-0, PREV, NONE); + PIN_SLP(gpj0-1, PREV, NONE); + PIN_SLP(gpj0-2, PREV, NONE); + PIN_SLP(gpj0-3, INPUT, DOWN); + PIN_SLP(gpj0-4, PREV, NONE); + PIN_SLP(gpj0-5, PREV, NONE); + PIN_SLP(gpj0-6, INPUT, DOWN); + PIN_SLP(gpj0-7, INPUT, DOWN); + + PIN_SLP(gpj1-0, INPUT, DOWN); + PIN_SLP(gpj1-1, PREV, NONE); + PIN_SLP(gpj1-2, PREV, NONE); + PIN_SLP(gpj1-3, INPUT, DOWN); + PIN_SLP(gpj1-4, INPUT, DOWN); + }; +}; + +&pinctrl_1 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep1>; + + hdmi_hpd: hdmi-hpd { + samsung,pins = "gpx3-7"; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + }; + + sleep1: sleep-states { + PIN_SLP(gpk0-0, PREV, NONE); + PIN_SLP(gpk0-1, PREV, NONE); + PIN_SLP(gpk0-2, OUT0, NONE); + PIN_SLP(gpk0-3, PREV, NONE); + PIN_SLP(gpk0-4, PREV, NONE); + PIN_SLP(gpk0-5, PREV, NONE); + PIN_SLP(gpk0-6, PREV, NONE); + + PIN_SLP(gpk1-0, INPUT, DOWN); + PIN_SLP(gpk1-1, INPUT, DOWN); + PIN_SLP(gpk1-2, INPUT, DOWN); + PIN_SLP(gpk1-3, PREV, NONE); + PIN_SLP(gpk1-4, PREV, NONE); + PIN_SLP(gpk1-5, PREV, NONE); + PIN_SLP(gpk1-6, PREV, NONE); + + PIN_SLP(gpk2-0, INPUT, DOWN); + PIN_SLP(gpk2-1, INPUT, DOWN); + PIN_SLP(gpk2-2, INPUT, DOWN); + PIN_SLP(gpk2-3, INPUT, DOWN); + PIN_SLP(gpk2-4, INPUT, DOWN); + PIN_SLP(gpk2-5, INPUT, DOWN); + PIN_SLP(gpk2-6, INPUT, DOWN); + + PIN_SLP(gpk3-0, OUT0, NONE); + PIN_SLP(gpk3-1, INPUT, NONE); + PIN_SLP(gpk3-2, INPUT, DOWN); + PIN_SLP(gpk3-3, INPUT, NONE); + PIN_SLP(gpk3-4, INPUT, NONE); + PIN_SLP(gpk3-5, INPUT, NONE); + PIN_SLP(gpk3-6, INPUT, NONE); + + PIN_SLP(gpl0-0, INPUT, DOWN); + PIN_SLP(gpl0-1, INPUT, DOWN); + PIN_SLP(gpl0-2, INPUT, DOWN); + PIN_SLP(gpl0-3, INPUT, DOWN); + PIN_SLP(gpl0-4, PREV, NONE); + PIN_SLP(gpl0-6, PREV, NONE); + + PIN_SLP(gpl1-0, INPUT, DOWN); + PIN_SLP(gpl1-1, INPUT, DOWN); + PIN_SLP(gpl2-0, INPUT, DOWN); + PIN_SLP(gpl2-1, INPUT, DOWN); + PIN_SLP(gpl2-2, INPUT, DOWN); + PIN_SLP(gpl2-3, INPUT, DOWN); + PIN_SLP(gpl2-4, INPUT, DOWN); + PIN_SLP(gpl2-5, INPUT, DOWN); + PIN_SLP(gpl2-6, PREV, NONE); + PIN_SLP(gpl2-7, INPUT, DOWN); + + PIN_SLP(gpm0-0, INPUT, DOWN); + PIN_SLP(gpm0-1, INPUT, DOWN); + PIN_SLP(gpm0-2, INPUT, DOWN); + PIN_SLP(gpm0-3, INPUT, DOWN); + PIN_SLP(gpm0-4, INPUT, DOWN); + PIN_SLP(gpm0-5, INPUT, DOWN); + PIN_SLP(gpm0-6, INPUT, DOWN); + PIN_SLP(gpm0-7, INPUT, DOWN); + + PIN_SLP(gpm1-0, INPUT, DOWN); + PIN_SLP(gpm1-1, INPUT, DOWN); + PIN_SLP(gpm1-2, INPUT, NONE); + PIN_SLP(gpm1-3, INPUT, NONE); + PIN_SLP(gpm1-4, INPUT, NONE); + PIN_SLP(gpm1-5, INPUT, NONE); + PIN_SLP(gpm1-6, INPUT, DOWN); + + PIN_SLP(gpm2-0, INPUT, NONE); + PIN_SLP(gpm2-1, INPUT, NONE); + PIN_SLP(gpm2-2, INPUT, DOWN); + PIN_SLP(gpm2-3, INPUT, DOWN); + PIN_SLP(gpm2-4, INPUT, DOWN); + + PIN_SLP(gpm3-0, PREV, NONE); + PIN_SLP(gpm3-1, PREV, NONE); + PIN_SLP(gpm3-2, PREV, NONE); + PIN_SLP(gpm3-3, OUT1, NONE); + PIN_SLP(gpm3-4, INPUT, DOWN); + PIN_SLP(gpm3-5, INPUT, DOWN); + PIN_SLP(gpm3-6, INPUT, DOWN); + PIN_SLP(gpm3-7, INPUT, DOWN); + + PIN_SLP(gpm4-0, INPUT, DOWN); + PIN_SLP(gpm4-1, INPUT, DOWN); + PIN_SLP(gpm4-2, INPUT, DOWN); + PIN_SLP(gpm4-3, INPUT, DOWN); + PIN_SLP(gpm4-4, INPUT, DOWN); + PIN_SLP(gpm4-5, INPUT, DOWN); + PIN_SLP(gpm4-6, INPUT, DOWN); + PIN_SLP(gpm4-7, INPUT, DOWN); + + PIN_SLP(gpy0-0, INPUT, DOWN); + PIN_SLP(gpy0-1, INPUT, DOWN); + PIN_SLP(gpy0-2, INPUT, DOWN); + PIN_SLP(gpy0-3, INPUT, DOWN); + PIN_SLP(gpy0-4, INPUT, DOWN); + PIN_SLP(gpy0-5, INPUT, DOWN); + + PIN_SLP(gpy1-0, INPUT, DOWN); + PIN_SLP(gpy1-1, INPUT, DOWN); + PIN_SLP(gpy1-2, INPUT, DOWN); + PIN_SLP(gpy1-3, INPUT, DOWN); + + PIN_SLP(gpy2-0, PREV, NONE); + PIN_SLP(gpy2-1, INPUT, DOWN); + PIN_SLP(gpy2-2, INPUT, NONE); + PIN_SLP(gpy2-3, INPUT, NONE); + PIN_SLP(gpy2-4, INPUT, NONE); + PIN_SLP(gpy2-5, INPUT, NONE); + + PIN_SLP(gpy3-0, INPUT, DOWN); + PIN_SLP(gpy3-1, INPUT, DOWN); + PIN_SLP(gpy3-2, INPUT, DOWN); + PIN_SLP(gpy3-3, INPUT, DOWN); + PIN_SLP(gpy3-4, INPUT, DOWN); + PIN_SLP(gpy3-5, INPUT, DOWN); + PIN_SLP(gpy3-6, INPUT, DOWN); + PIN_SLP(gpy3-7, INPUT, DOWN); + + PIN_SLP(gpy4-0, INPUT, DOWN); + PIN_SLP(gpy4-1, INPUT, DOWN); + PIN_SLP(gpy4-2, INPUT, DOWN); + PIN_SLP(gpy4-3, INPUT, DOWN); + PIN_SLP(gpy4-4, INPUT, DOWN); + PIN_SLP(gpy4-5, INPUT, DOWN); + PIN_SLP(gpy4-6, INPUT, DOWN); + PIN_SLP(gpy4-7, INPUT, DOWN); + + PIN_SLP(gpy5-0, INPUT, DOWN); + PIN_SLP(gpy5-1, INPUT, DOWN); + PIN_SLP(gpy5-2, INPUT, DOWN); + PIN_SLP(gpy5-3, INPUT, DOWN); + PIN_SLP(gpy5-4, INPUT, DOWN); + PIN_SLP(gpy5-5, INPUT, DOWN); + PIN_SLP(gpy5-6, INPUT, DOWN); + PIN_SLP(gpy5-7, INPUT, DOWN); + + PIN_SLP(gpy6-0, INPUT, DOWN); + PIN_SLP(gpy6-1, INPUT, DOWN); + PIN_SLP(gpy6-2, INPUT, DOWN); + PIN_SLP(gpy6-3, INPUT, DOWN); + PIN_SLP(gpy6-4, INPUT, DOWN); + PIN_SLP(gpy6-5, INPUT, DOWN); + PIN_SLP(gpy6-6, INPUT, DOWN); + PIN_SLP(gpy6-7, INPUT, DOWN); + }; +}; + +&pinctrl_2 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep2>; + + sleep2: sleep-states { + PIN_SLP(gpz-0, INPUT, DOWN); + PIN_SLP(gpz-1, INPUT, DOWN); + PIN_SLP(gpz-2, INPUT, DOWN); + PIN_SLP(gpz-3, INPUT, DOWN); + PIN_SLP(gpz-4, INPUT, DOWN); + PIN_SLP(gpz-5, INPUT, DOWN); + PIN_SLP(gpz-6, INPUT, DOWN); + }; +}; + +&pinctrl_3 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep3>; + + sleep3: sleep-states { + PIN_SLP(gpv0-0, INPUT, DOWN); + PIN_SLP(gpv0-1, INPUT, DOWN); + PIN_SLP(gpv0-2, INPUT, DOWN); + PIN_SLP(gpv0-3, INPUT, DOWN); + PIN_SLP(gpv0-4, INPUT, DOWN); + PIN_SLP(gpv0-5, INPUT, DOWN); + PIN_SLP(gpv0-6, INPUT, DOWN); + PIN_SLP(gpv0-7, INPUT, DOWN); + + PIN_SLP(gpv1-0, INPUT, DOWN); + PIN_SLP(gpv1-1, INPUT, DOWN); + PIN_SLP(gpv1-2, INPUT, DOWN); + PIN_SLP(gpv1-3, INPUT, DOWN); + PIN_SLP(gpv1-4, INPUT, DOWN); + PIN_SLP(gpv1-5, INPUT, DOWN); + PIN_SLP(gpv1-6, INPUT, DOWN); + PIN_SLP(gpv1-7, INPUT, DOWN); + + PIN_SLP(gpv2-0, INPUT, DOWN); + PIN_SLP(gpv2-1, INPUT, DOWN); + PIN_SLP(gpv2-2, INPUT, DOWN); + PIN_SLP(gpv2-3, INPUT, DOWN); + PIN_SLP(gpv2-4, INPUT, DOWN); + PIN_SLP(gpv2-5, INPUT, DOWN); + PIN_SLP(gpv2-6, INPUT, DOWN); + PIN_SLP(gpv2-7, INPUT, DOWN); + + PIN_SLP(gpv3-0, INPUT, DOWN); + PIN_SLP(gpv3-1, INPUT, DOWN); + PIN_SLP(gpv3-2, INPUT, DOWN); + PIN_SLP(gpv3-3, INPUT, DOWN); + PIN_SLP(gpv3-4, INPUT, DOWN); + PIN_SLP(gpv3-5, INPUT, DOWN); + PIN_SLP(gpv3-6, INPUT, DOWN); + PIN_SLP(gpv3-7, INPUT, DOWN); + + PIN_SLP(gpv4-0, INPUT, DOWN); + }; +}; + +&pwm { + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <0>; + status = "okay"; +}; + +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; + +&sdhci_2 { + bus-width = <4>; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; + cd-inverted; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&ldo21_reg>; + status = "okay"; +}; + +&sdhci_3 { + #address-cells = <1>; + #size-cells = <0>; + non-removable; + bus-width = <4>; + + mmc-pwrseq = <&wlan_pwrseq>; + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpx2>; + interrupts = <5 IRQ_TYPE_NONE>; + interrupt-names = "host-wake"; + }; +}; + +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&spi_1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; + status = "okay"; + + s5c73m3_spi: s5c73m3@0 { + compatible = "samsung,s5c73m3"; + spi-max-frequency = <50000000>; + reg = <0>; + controller-data { + samsung,spi-feedback-delay = <2>; + }; + }; +}; + +&tmu { + vtmu-supply = <&ldo10_reg>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts new file mode 100644 index 0000000000000..eb402a0d66518 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-n710x.dts @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "exynos4412-midas.dtsi" + +/ { + compatible = "samsung,n710x", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; + model = "Samsung Galaxy Note 2 (GT-N7100, GT-N7105) based on Exynos4412"; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x80000000>; + }; + + /* bootargs are passed in by bootloader */ + + regulators { + cam_vdda_reg: voltage-regulator-9 { + compatible = "regulator-fixed"; + regulator-name = "CAM_SENSOR_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpm4 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; +}; + +&buck9_reg { + maxim,ena-gpios = <&gpm1 0 GPIO_ACTIVE_HIGH>; +}; + +&cam_af_reg { + gpio = <&gpm1 1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&cam_io_reg { + gpio = <&gpm0 7 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&i2c_3 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + mms152-touchscreen@48 { + compatible = "melfas,mms152"; + reg = <0x48>; + interrupt-parent = <&gpm2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + x-size = <720>; + y-size = <1280>; + avdd-supply = <&ldo23_reg>; + vdd-supply = <&ldo24_reg>; + }; +}; + +&ldo13_reg { + regulator-name = "VCC_1.8V_LCD"; + regulator-always-on; +}; + +&ldo25_reg { + regulator-name = "VCI_3.0V_LCD"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; + +&s5c73m3 { + standby-gpios = <&gpm0 6 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */ + vdda-supply = <&cam_vdda_reg>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 556ea78b8e326..d7ad07fd48f99 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -61,12 +61,6 @@ reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>; }; - camera { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <>; - }; - fixed-rate-clocks { xxti { compatible = "samsung,clock-xxti"; @@ -142,6 +136,12 @@ status = "okay"; }; +&camera { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + &clock_audss { assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, <&clock_audss EXYNOS_MOUT_I2S>, diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi index e8dd5f2d976fa..d7d5fdc230d8a 100644 --- a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi @@ -18,964 +18,962 @@ samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>; \ } -/ { - pinctrl_0: pinctrl@11400000 { - gpa0: gpa0 { - gpio-controller; - #gpio-cells = <2>; +&pinctrl_0 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpa1: gpa1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpb: gpb { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpc0: gpc0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpc1: gpc1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpd0: gpd0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpd1: gpd1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpf0: gpf0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpf1: gpf1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpf2: gpf2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpf3: gpf3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpj0: gpj0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpj1: gpj1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - uart0_data: uart0-data { - samsung,pins = "gpa0-0", "gpa0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart0_fctl: uart0-fctl { - samsung,pins = "gpa0-2", "gpa0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart1_data: uart1-data { - samsung,pins = "gpa0-4", "gpa0-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart1_fctl: uart1-fctl { - samsung,pins = "gpa0-6", "gpa0-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c2_bus: i2c2-bus { - samsung,pins = "gpa0-6", "gpa0-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart2_data: uart2-data { - samsung,pins = "gpa1-0", "gpa1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart2_fctl: uart2-fctl { - samsung,pins = "gpa1-2", "gpa1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart_audio_a: uart-audio-a { - samsung,pins = "gpa1-0", "gpa1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c3_bus: i2c3-bus { - samsung,pins = "gpa1-2", "gpa1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart3_data: uart3-data { - samsung,pins = "gpa1-4", "gpa1-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart_audio_b: uart-audio-b { - samsung,pins = "gpa1-4", "gpa1-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - spi0_bus: spi0-bus { - samsung,pins = "gpb-0", "gpb-2", "gpb-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c4_bus: i2c4-bus { - samsung,pins = "gpb-0", "gpb-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - spi1_bus: spi1-bus { - samsung,pins = "gpb-4", "gpb-6", "gpb-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c5_bus: i2c5-bus { - samsung,pins = "gpb-2", "gpb-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2s1_bus: i2s1-bus { - samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", - "gpc0-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pcm1_bus: pcm1-bus { - samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", - "gpc0-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - ac97_bus: ac97-bus { - samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", - "gpc0-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2s2_bus: i2s2-bus { - samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", - "gpc1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pcm2_bus: pcm2-bus { - samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", - "gpc1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - spdif_bus: spdif-bus { - samsung,pins = "gpc1-0", "gpc1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c6_bus: i2c6-bus { - samsung,pins = "gpc1-3", "gpc1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - spi2_bus: spi2-bus { - samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_5>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pwm0_out: pwm0-out { - samsung,pins = "gpd0-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pwm1_out: pwm1-out { - samsung,pins = "gpd0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - lcd_ctrl: lcd-ctrl { - samsung,pins = "gpd0-0", "gpd0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c7_bus: i2c7-bus { - samsung,pins = "gpd0-2", "gpd0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pwm2_out: pwm2-out { - samsung,pins = "gpd0-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pwm3_out: pwm3-out { - samsung,pins = "gpd0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c0_bus: i2c0-bus { - samsung,pins = "gpd1-0", "gpd1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - mipi0_clk: mipi0-clk { - samsung,pins = "gpd1-0", "gpd1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c1_bus: i2c1-bus { - samsung,pins = "gpd1-2", "gpd1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - mipi1_clk: mipi1-clk { - samsung,pins = "gpd1-2", "gpd1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - lcd_clk: lcd-clk { - samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - lcd_data16: lcd-data-width16 { - samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2", - "gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0", - "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7", - "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - lcd_data18: lcd-data-width18 { - samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1", - "gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7", - "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", - "gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1", - "gpf3-2", "gpf3-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - lcd_data24: lcd-data-width24 { - samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7", - "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3", - "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7", - "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", - "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7", - "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - lcd_ldi: lcd-ldi { - samsung,pins = "gpf3-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - cam_port_a_io: cam-port-a-io { - samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3", - "gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7", - "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - cam_port_a_clk_active: cam-port-a-clk-active { - samsung,pins = "gpj1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - cam_port_a_clk_idle: cam-port-a-clk-idle { - samsung,pins = "gpj1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - }; - - pinctrl_1: pinctrl@11000000 { - gpk0: gpk0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpk1: gpk1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpk2: gpk2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpk3: gpk3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpl0: gpl0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpl1: gpl1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpl2: gpl2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpm0: gpm0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpm1: gpm1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpm2: gpm2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpm3: gpm3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpm4: gpm4 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpy0: gpy0 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy1: gpy1 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy2: gpy2 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy3: gpy3 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy4: gpy4 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy5: gpy5 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy6: gpy6 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpx0: gpx0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <2>; - }; - - gpx1: gpx1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <2>; - }; - - gpx2: gpx2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpx3: gpx3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - sd0_clk: sd0-clk { - samsung,pins = "gpk0-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_cmd: sd0-cmd { - samsung,pins = "gpk0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_cd: sd0-cd { - samsung,pins = "gpk0-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_bus1: sd0-bus-width1 { - samsung,pins = "gpk0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_bus4: sd0-bus-width4 { - samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_bus8: sd0-bus-width8 { - samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd4_clk: sd4-clk { - samsung,pins = "gpk0-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd4_cmd: sd4-cmd { - samsung,pins = "gpk0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd4_cd: sd4-cd { - samsung,pins = "gpk0-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd4_bus1: sd4-bus-width1 { - samsung,pins = "gpk0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd4_bus4: sd4-bus-width4 { - samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd4_bus8: sd4-bus-width8 { - samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd1_clk: sd1-clk { - samsung,pins = "gpk1-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd1_cmd: sd1-cmd { - samsung,pins = "gpk1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd1_cd: sd1-cd { - samsung,pins = "gpk1-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd1_bus1: sd1-bus-width1 { - samsung,pins = "gpk1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd1_bus4: sd1-bus-width4 { - samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_clk: sd2-clk { - samsung,pins = "gpk2-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_cmd: sd2-cmd { - samsung,pins = "gpk2-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_cd: sd2-cd { - samsung,pins = "gpk2-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_bus1: sd2-bus-width1 { - samsung,pins = "gpk2-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_bus4: sd2-bus-width4 { - samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_bus8: sd2-bus-width8 { - samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd3_clk: sd3-clk { - samsung,pins = "gpk3-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd3_cmd: sd3-cmd { - samsung,pins = "gpk3-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd3_cd: sd3-cd { - samsung,pins = "gpk3-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd3_bus1: sd3-bus-width1 { - samsung,pins = "gpk3-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd3_bus4: sd3-bus-width4 { - samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - cam_port_b_io: cam-port-b-io { - samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", - "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", - "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - cam_port_b_clk_active: cam-port-b-clk-active { - samsung,pins = "gpm2-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - cam_port_b_clk_idle: cam-port-b-clk-idle { - samsung,pins = "gpm2-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - eint0: ext-int0 { - samsung,pins = "gpx0-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - eint8: ext-int8 { - samsung,pins = "gpx1-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - eint15: ext-int15 { - samsung,pins = "gpx1-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - eint16: ext-int16 { - samsung,pins = "gpx2-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - eint31: ext-int31 { - samsung,pins = "gpx3-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_F>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - fimc_is_i2c0: fimc-is-i2c0 { - samsung,pins = "gpm4-0", "gpm4-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - fimc_is_i2c1: fimc-is-i2c1 { - samsung,pins = "gpm4-2", "gpm4-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - fimc_is_uart: fimc-is-uart { - samsung,pins = "gpm3-5", "gpm3-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - hdmi_cec: hdmi-cec { - samsung,pins = "gpx3-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - }; - - pinctrl_2: pinctrl@3860000 { - gpz: gpz { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - i2s0_bus: i2s0-bus { - samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", - "gpz-4", "gpz-5", "gpz-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pcm0_bus: pcm0-bus { - samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", - "gpz-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - }; - - pinctrl_3: pinctrl@106e0000 { - gpv0: gpv0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpv1: gpv1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpv2: gpv2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpv3: gpv3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpv4: gpv4 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - c2c_bus: c2c-bus { - samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3", - "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7", - "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3", - "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7", - "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3", - "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7", - "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3", - "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7", - "gpv4-0", "gpv4-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + uart_audio_a: uart-audio-a { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + uart_audio_b: uart-audio-b { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpb-0", "gpb-2", "gpb-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpb-0", "gpb-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpb-4", "gpb-6", "gpb-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + i2c5_bus: i2c5-bus { + samsung,pins = "gpb-2", "gpb-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + ac97_bus: ac97-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + spdif_bus: spdif-bus { + samsung,pins = "gpc1-0", "gpc1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + i2c6_bus: i2c6-bus { + samsung,pins = "gpc1-3", "gpc1-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_5>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + lcd_ctrl: lcd-ctrl { + samsung,pins = "gpd0-0", "gpd0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + i2c7_bus: i2c7-bus { + samsung,pins = "gpd0-2", "gpd0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + mipi0_clk: mipi0-clk { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + mipi1_clk: mipi1-clk { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + lcd_clk: lcd-clk { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + lcd_data16: lcd-data-width16 { + samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2", + "gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0", + "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + lcd_data18: lcd-data-width18 { + samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1", + "gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1", + "gpf3-2", "gpf3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + lcd_data24: lcd-data-width24 { + samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3", + "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + lcd_ldi: lcd-ldi { + samsung,pins = "gpf3-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + cam_port_a_io: cam-port-a-io { + samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3", + "gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7", + "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + cam_port_a_clk_active: cam-port-a-clk-active { + samsung,pins = "gpj1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + cam_port_a_clk_idle: cam-port-a-clk-idle { + samsung,pins = "gpj1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; +}; + +&pinctrl_1 { + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk3: gpk3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl1: gpl1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl2: gpl2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm0: gpm0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm1: gpm1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm2: gpm2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm3: gpm3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm4: gpm4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpk0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpk0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpk0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpk0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd4_clk: sd4-clk { + samsung,pins = "gpk0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd4_cmd: sd4-cmd { + samsung,pins = "gpk0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd4_cd: sd4-cd { + samsung,pins = "gpk0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd4_bus1: sd4-bus-width1 { + samsung,pins = "gpk0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd4_bus4: sd4-bus-width4 { + samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd4_bus8: sd4-bus-width8 { + samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpk1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpk1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpk1-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpk1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpk2-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpk2-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpk2-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpk2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd2_bus8: sd2-bus-width8 { + samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd3_clk: sd3-clk { + samsung,pins = "gpk3-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd3_cmd: sd3-cmd { + samsung,pins = "gpk3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd3_cd: sd3-cd { + samsung,pins = "gpk3-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd3_bus1: sd3-bus-width1 { + samsung,pins = "gpk3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + sd3_bus4: sd3-bus-width4 { + samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + cam_port_b_io: cam-port-b-io { + samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", + "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", + "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + cam_port_b_clk_active: cam-port-b-clk-active { + samsung,pins = "gpm2-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; + + cam_port_b_clk_idle: cam-port-b-clk-idle { + samsung,pins = "gpm2-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + eint0: ext-int0 { + samsung,pins = "gpx0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + eint8: ext-int8 { + samsung,pins = "gpx1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + eint15: ext-int15 { + samsung,pins = "gpx1-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + eint16: ext-int16 { + samsung,pins = "gpx2-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + eint31: ext-int31 { + samsung,pins = "gpx3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + fimc_is_i2c0: fimc-is-i2c0 { + samsung,pins = "gpm4-0", "gpm4-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + fimc_is_i2c1: fimc-is-i2c1 { + samsung,pins = "gpm4-2", "gpm4-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + fimc_is_uart: fimc-is-uart { + samsung,pins = "gpm3-5", "gpm3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + hdmi_cec: hdmi-cec { + samsung,pins = "gpx3-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; +}; + +&pinctrl_2 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + i2s0_bus: i2s0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4", "gpz-5", "gpz-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + pcm0_bus: pcm0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; +}; + +&pinctrl_3 { + gpv0: gpv0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv1: gpv1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv2: gpv2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv3: gpv3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv4: gpv4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + c2c_bus: c2c-bus { + samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3", + "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7", + "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3", + "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7", + "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3", + "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7", + "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3", + "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7", + "gpv4-0", "gpv4-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; }; diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts index 5504398e6e37d..01f37b5ac9c4c 100644 --- a/arch/arm/boot/dts/exynos4412-tiny4412.dts +++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * FriendlyARM's Exynos4412 based TINY4412 board device tree source * @@ -5,11 +6,7 @@ * * Device tree source file for FriendlyARM's TINY4412 board which is based on * Samsung's Exynos4412 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; #include "exynos4412.dtsi" diff --git a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi index e3f7934d19d0a..489b58c619eea 100644 --- a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi +++ b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device tree sources for Exynos4412 TMU sensor configuration * * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #include <dt-bindings/thermal/thermal_exynos.h> diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index f285790e8e047..327ee980d3a57 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos4412 based Trats 2 board device tree source * @@ -6,30 +7,14 @@ * * Device tree source file for Samsung's Trats 2 board which is based on * Samsung's Exynos4412 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ + */ /dts-v1/; -#include "exynos4412.dtsi" -#include "exynos4412-ppmu-common.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/clock/maxim,max77686.h> -#include <dt-bindings/pinctrl/samsung.h> +#include "exynos4412-galaxy-s3.dtsi" / { model = "Samsung Trats 2 based on Exynos4412"; - compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4"; - - aliases { - i2c9 = &i2c_ak8975; - i2c10 = &i2c_cm36651; - i2c11 = &i2c_max77693; - i2c12 = &i2c_max77693_fuel; - }; + compatible = "samsung,trats2", "samsung,midas", "samsung,exynos4412", "samsung,exynos4"; memory@40000000 { device_type = "memory"; @@ -38,1378 +23,5 @@ chosen { bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; - stdout-path = &serial_2; - }; - - firmware@204f000 { - compatible = "samsung,secure-firmware"; - reg = <0x0204F000 0x1000>; - }; - - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti", "fixed-clock"; - clock-frequency = <0>; - }; - - xusbxti { - compatible = "samsung,clock-xusbxti", "fixed-clock"; - clock-frequency = <24000000>; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - cam_io_reg: voltage-regulator-1 { - compatible = "regulator-fixed"; - regulator-name = "CAM_SENSOR_A"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - lcd_vdd3_reg: voltage-regulator-2 { - compatible = "regulator-fixed"; - regulator-name = "LCD_VDD_2.2V"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - cam_af_reg: voltage-regulator-3 { - compatible = "regulator-fixed"; - regulator-name = "CAM_AF"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - ps_als_reg: voltage-regulator-5 { - compatible = "regulator-fixed"; - regulator-name = "LED_A_3.0V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vsil12: voltage-regulator-6 { - compatible = "regulator-fixed"; - regulator-name = "VSIL_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&buck7_reg>; - }; - - vcc33mhl: voltage-regulator-7 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3.3_MHL"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vcc18mhl: voltage-regulator-8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1.8_MHL"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - key-down { - gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; - linux,code = <114>; - label = "volume down"; - debounce-interval = <10>; - }; - - key-up { - gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; - linux,code = <115>; - label = "volume up"; - debounce-interval = <10>; - }; - - key-power { - gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; - linux,code = <116>; - label = "power"; - debounce-interval = <10>; - wakeup-source; - }; - - key-ok { - gpios = <&gpx0 1 GPIO_ACTIVE_LOW>; - linux,code = <139>; - label = "ok"; - debounce-inteval = <10>; - wakeup-source; - }; - }; - - i2c_max77693: i2c-gpio-1 { - compatible = "i2c-gpio"; - gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - max77693@66 { - compatible = "maxim,max77693"; - interrupt-parent = <&gpx1>; - interrupts = <5 IRQ_TYPE_EDGE_FALLING>; - reg = <0x66>; - - regulators { - esafeout1_reg: ESAFEOUT1 { - regulator-name = "ESAFEOUT1"; - }; - esafeout2_reg: ESAFEOUT2 { - regulator-name = "ESAFEOUT2"; - }; - charger_reg: CHARGER { - regulator-name = "CHARGER"; - regulator-min-microamp = <60000>; - regulator-max-microamp = <2580000>; - }; - }; - - max77693_haptic { - compatible = "maxim,max77693-haptic"; - haptic-supply = <&ldo26_reg>; - pwms = <&pwm 0 38022 0>; - }; - - charger { - compatible = "maxim,max77693-charger"; - - maxim,constant-microvolt = <4350000>; - maxim,min-system-microvolt = <3600000>; - maxim,thermal-regulation-celsius = <100>; - maxim,battery-overcurrent-microamp = <3500000>; - maxim,charge-input-threshold-microvolt = <4300000>; - }; - }; - }; - - i2c_max77693_fuel: i2c-gpio-3 { - compatible = "i2c-gpio"; - gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - max77693-fuel-gauge@36 { - compatible = "maxim,max17047"; - interrupt-parent = <&gpx2>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - reg = <0x36>; - - maxim,over-heat-temp = <700>; - maxim,over-volt = <4500>; - }; - }; - - i2c_ak8975: i2c-gpio-0 { - compatible = "i2c-gpio"; - gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - ak8975@c { - compatible = "asahi-kasei,ak8975"; - reg = <0x0c>; - gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>; - }; - }; - - i2c_cm36651: i2c-gpio-2 { - compatible = "i2c-gpio"; - gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - - cm36651@18 { - compatible = "capella,cm36651"; - reg = <0x18>; - interrupt-parent = <&gpx0>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; - vled-supply = <&ps_als_reg>; - }; - }; - - i2c-mhl { - compatible = "i2c-gpio"; - gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>; - i2c-gpio,delay-us = <100>; - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-0 = <&i2c_mhl_bus>; - pinctrl-names = "default"; - status = "okay"; - - sii9234: hdmi-bridge@39 { - compatible = "sil,sii9234"; - avcc33-supply = <&vcc33mhl>; - iovcc18-supply = <&vcc18mhl>; - avcc12-supply = <&vsil12>; - cvcc12-supply = <&vsil12>; - reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpf3>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x39>; - - port { - mhl_to_hdmi: endpoint { - remote-endpoint = <&hdmi_to_mhl>; - }; - }; - }; - }; - - camera: camera { - pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; - pinctrl-names = "default"; - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_CAM0>, - <&clock CLK_MOUT_CAM1>; - assigned-clock-parents = <&clock CLK_XUSBXTI>, - <&clock CLK_XUSBXTI>; - - - }; - - wlan_pwrseq: sdhci3-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>; - clocks = <&max77686 MAX77686_CLK_PMIC>; - clock-names = "ext_clock"; - }; - - sound { - compatible = "samsung,trats2-audio"; - samsung,i2s-controller = <&i2s0>; - samsung,model = "Trats2"; - samsung,audio-codec = <&wm1811>; - samsung,audio-routing = - "SPK", "SPKOUTLN", - "SPK", "SPKOUTLP", - "SPK", "SPKOUTRN", - "SPK", "SPKOUTRP"; - }; - - thermistor-ap { - compatible = "murata,ncp15wb473"; - pullup-uv = <1800000>; /* VCC_1.8V_AP */ - pullup-ohm = <100000>; /* 100K */ - pulldown-ohm = <100000>; /* 100K */ - io-channels = <&adc 1>; /* AP temperature */ - }; - - thermistor-battery { - compatible = "murata,ncp15wb473"; - pullup-uv = <1800000>; /* VCC_1.8V_AP */ - pullup-ohm = <100000>; /* 100K */ - pulldown-ohm = <100000>; /* 100K */ - io-channels = <&adc 2>; /* Battery temperature */ - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - cooling-maps { - map0 { - /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 7 7>; - }; - map1 { - /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 13 13>; - }; - }; - }; - }; -}; - -&adc { - vdd-supply = <&ldo3_reg>; - status = "okay"; -}; - -&bus_dmc { - devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; - vdd-supply = <&buck1_reg>; - status = "okay"; -}; - -&bus_acp { - devfreq = <&bus_dmc>; - status = "okay"; -}; - -&bus_c2c { - devfreq = <&bus_dmc>; - status = "okay"; -}; - -&bus_leftbus { - devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; - vdd-supply = <&buck3_reg>; - status = "okay"; -}; - -&bus_rightbus { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&bus_display { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&bus_fsys { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&bus_peri { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&bus_mfc { - devfreq = <&bus_leftbus>; - status = "okay"; -}; - -&cpu0 { - cpu0-supply = <&buck2_reg>; -}; - -&csis_0 { - status = "okay"; - vddcore-supply = <&ldo8_reg>; - vddio-supply = <&ldo10_reg>; - assigned-clocks = <&clock CLK_MOUT_CSIS0>, - <&clock CLK_SCLK_CSIS0>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; - - /* Camera C (3) MIPI CSI-2 (CSIS0) */ - port@3 { - reg = <3>; - csis0_ep: endpoint { - remote-endpoint = <&s5c73m3_ep>; - data-lanes = <1 2 3 4>; - samsung,csis-hs-settle = <12>; - }; - }; -}; - -&csis_1 { - status = "okay"; - vddcore-supply = <&ldo8_reg>; - vddio-supply = <&ldo10_reg>; - assigned-clocks = <&clock CLK_MOUT_CSIS1>, - <&clock CLK_SCLK_CSIS1>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; - - /* Camera D (4) MIPI CSI-2 (CSIS1) */ - port@4 { - reg = <4>; - csis1_ep: endpoint { - remote-endpoint = <&is_s5k6a3_ep>; - data-lanes = <1>; - samsung,csis-hs-settle = <18>; - samsung,csis-wclk; - }; - }; -}; - -&dsi_0 { - vddcore-supply = <&ldo8_reg>; - vddio-supply = <&ldo10_reg>; - samsung,burst-clock-frequency = <500000000>; - samsung,esc-clock-frequency = <20000000>; - samsung,pll-clock-frequency = <24000000>; - status = "okay"; - - panel@0 { - compatible = "samsung,s6e8aa0"; - reg = <0>; - vdd3-supply = <&lcd_vdd3_reg>; - vci-supply = <&ldo25_reg>; - reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>; - power-on-delay= <50>; - reset-delay = <100>; - init-delay = <100>; - flip-horizontal; - flip-vertical; - panel-width-mm = <58>; - panel-height-mm = <103>; - - display-timings { - timing-0 { - clock-frequency = <57153600>; - hactive = <720>; - vactive = <1280>; - hfront-porch = <5>; - hback-porch = <5>; - hsync-len = <5>; - vfront-porch = <13>; - vback-porch = <1>; - vsync-len = <2>; - }; - }; - }; -}; - -&exynos_usbphy { - vbus-supply = <&esafeout1_reg>; - status = "okay"; -}; - -&fimc_0 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC0>, - <&clock CLK_SCLK_FIMC0>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; -}; - -&fimc_1 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC1>, - <&clock CLK_SCLK_FIMC1>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; -}; - -&fimc_2 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC2>, - <&clock CLK_SCLK_FIMC2>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; -}; - -&fimc_3 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC3>, - <&clock CLK_SCLK_FIMC3>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; -}; - -&fimc_is { - pinctrl-0 = <&fimc_is_uart>; - pinctrl-names = "default"; - status = "okay"; - - i2c1_isp: i2c-isp@12140000 { - pinctrl-0 = <&fimc_is_i2c1>; - pinctrl-names = "default"; - - s5k6a3@10 { - compatible = "samsung,s5k6a3"; - reg = <0x10>; - svdda-supply = <&cam_io_reg>; - svddio-supply = <&ldo19_reg>; - afvdd-supply = <&ldo19_reg>; - clock-frequency = <24000000>; - /* CAM_B_CLKOUT */ - clocks = <&camera 1>; - clock-names = "extclk"; - samsung,camclk-out = <1>; - gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>; - - port { - is_s5k6a3_ep: endpoint { - remote-endpoint = <&csis1_ep>; - data-lanes = <1>; - }; - }; - }; - }; -}; - -&fimc_lite_0 { - status = "okay"; -}; - -&fimc_lite_1 { - status = "okay"; -}; - -&fimd { - status = "okay"; -}; - -&hdmi { - hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd>; - vdd-supply = <&ldo3_reg>; - vdd_osc-supply = <&ldo4_reg>; - vdd_pll-supply = <&ldo3_reg>; - ddc = <&i2c_5>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - hdmi_to_mhl: endpoint { - remote-endpoint = <&mhl_to_hdmi>; - }; - }; - }; -}; - -&hsotg { - vusb_d-supply = <&ldo15_reg>; - vusb_a-supply = <&ldo12_reg>; - dr_mode = "peripheral"; - status = "okay"; -}; - -&i2c_0 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <400000>; - pinctrl-0 = <&i2c0_bus>; - pinctrl-names = "default"; - status = "okay"; - - s5c73m3@3c { - compatible = "samsung,s5c73m3"; - reg = <0x3c>; - standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */ - xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */ - vdd-int-supply = <&buck9_reg>; - vddio-cis-supply = <&ldo9_reg>; - vdda-supply = <&ldo17_reg>; - vddio-host-supply = <&ldo18_reg>; - vdd-af-supply = <&cam_af_reg>; - vdd-reg-supply = <&cam_io_reg>; - clock-frequency = <24000000>; - /* CAM_A_CLKOUT */ - clocks = <&camera 0>; - clock-names = "cis_extclk"; - port { - s5c73m3_ep: endpoint { - remote-endpoint = <&csis0_ep>; - data-lanes = <1 2 3 4>; - }; - }; - }; -}; - -&i2c_3 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <400000>; - pinctrl-0 = <&i2c3_bus>; - pinctrl-names = "default"; - status = "okay"; - - mms114-touchscreen@48 { - compatible = "melfas,mms114"; - reg = <0x48>; - interrupt-parent = <&gpm2>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - x-size = <720>; - y-size = <1280>; - avdd-supply = <&ldo23_reg>; - vdd-supply = <&ldo24_reg>; - }; -}; - -&i2c_4 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <100000>; - pinctrl-0 = <&i2c4_bus>; - pinctrl-names = "default"; - status = "okay"; - - wm1811: wm1811@1a { - compatible = "wlf,wm1811"; - reg = <0x1a>; - clocks = <&pmu_system_controller 0>; - clock-names = "MCLK1"; - DCVDD-supply = <&ldo3_reg>; - DBVDD1-supply = <&ldo3_reg>; - wlf,ldo1ena = <&gpj0 4 0>; }; }; - -&i2c_5 { - status = "okay"; -}; - -&i2c_7 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <100000>; - pinctrl-0 = <&i2c7_bus>; - pinctrl-names = "default"; - status = "okay"; - - max77686: max77686_pmic@9 { - compatible = "maxim,max77686"; - interrupt-parent = <&gpx0>; - interrupts = <7 IRQ_TYPE_NONE>; - reg = <0x09>; - #clock-cells = <1>; - - voltage-regulators { - ldo1_reg: LDO1 { - regulator-name = "VALIVE_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "VM1M2_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo3_reg: LDO3 { - regulator-name = "VCC_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: LDO4 { - regulator-name = "VCC_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo5_reg: LDO5 { - regulator-name = "VCC_1.8V_IO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo6_reg: LDO6 { - regulator-name = "VMPLL_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo7_reg: LDO7 { - regulator-name = "VPLL_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo8_reg: LDO8 { - regulator-name = "VMIPI_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo9_reg: LDO9 { - regulator-name = "CAM_ISP_MIPI_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo10_reg: LDO10 { - regulator-name = "VMIPI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo11_reg: LDO11 { - regulator-name = "VABB1_1.95V"; - regulator-min-microvolt = <1950000>; - regulator-max-microvolt = <1950000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo12_reg: LDO12 { - regulator-name = "VUOTG_3.0V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo13_reg: LDO13 { - regulator-name = "NFC_AVDD_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo14_reg: LDO14 { - regulator-name = "VABB2_1.95V"; - regulator-min-microvolt = <1950000>; - regulator-max-microvolt = <1950000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo15_reg: LDO15 { - regulator-name = "VHSIC_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo16_reg: LDO16 { - regulator-name = "VHSIC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo17_reg: LDO17 { - regulator-name = "CAM_SENSOR_CORE_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo18_reg: LDO18 { - regulator-name = "CAM_ISP_SEN_IO_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo19_reg: LDO19 { - regulator-name = "VT_CAM_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo20_reg: LDO20 { - regulator-name = "VDDQ_PRE_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo21_reg: LDO21 { - regulator-name = "VTF_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; - }; - - ldo22_reg: LDO22 { - regulator-name = "VMEM_VDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; - }; - - ldo23_reg: LDO23 { - regulator-name = "TSP_AVDD_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo24_reg: LDO24 { - regulator-name = "TSP_VDD_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo25_reg: LDO25 { - regulator-name = "LCD_VCC_3.3V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo26_reg: LDO26 { - regulator-name = "MOTOR_VCC_3.0V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1150000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1150000>; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck5_reg: BUCK5 { - regulator-name = "VMEM_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - buck6_reg: BUCK6 { - regulator-name = "VCC_SUB_1.35V"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "VCC_SUB_2.0V"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "VMEM_VDDF_3.0V"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; - }; - - buck9_reg: BUCK9 { - regulator-name = "CAM_ISP_CORE_1.2V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1200000>; - maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; - }; - }; - }; -}; - -&i2c_8 { - status = "okay"; -}; - -&i2s0 { - pinctrl-0 = <&i2s0_bus>; - pinctrl-names = "default"; - status = "okay"; -}; - -&mixer { - status = "okay"; -}; - -&mshc_0 { - broken-cd; - non-removable; - card-detect-delay = <200>; - vmmc-supply = <&ldo22_reg>; - clock-frequency = <400000000>; - samsung,dw-mshc-ciu-div = <0>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; - pinctrl-names = "default"; - status = "okay"; - bus-width = <8>; - cap-mmc-highspeed; -}; - -&pmu_system_controller { - assigned-clocks = <&pmu_system_controller 0>; - assigned-clock-parents = <&clock CLK_XUSBXTI>; -}; - -&pinctrl_0 { - pinctrl-names = "default"; - pinctrl-0 = <&sleep0>; - - mhl_int: mhl-int { - samsung,pins = "gpf3-5"; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - }; - - i2c_mhl_bus: i2c-mhl-bus { - samsung,pins = "gpf0-4", "gpf0-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - sleep0: sleep-states { - PIN_SLP(gpa0-0, INPUT, NONE); - PIN_SLP(gpa0-1, OUT0, NONE); - PIN_SLP(gpa0-2, INPUT, NONE); - PIN_SLP(gpa0-3, INPUT, UP); - PIN_SLP(gpa0-4, INPUT, NONE); - PIN_SLP(gpa0-5, INPUT, DOWN); - PIN_SLP(gpa0-6, INPUT, DOWN); - PIN_SLP(gpa0-7, INPUT, UP); - - PIN_SLP(gpa1-0, INPUT, DOWN); - PIN_SLP(gpa1-1, INPUT, DOWN); - PIN_SLP(gpa1-2, INPUT, DOWN); - PIN_SLP(gpa1-3, INPUT, DOWN); - PIN_SLP(gpa1-4, INPUT, DOWN); - PIN_SLP(gpa1-5, INPUT, DOWN); - - PIN_SLP(gpb-0, INPUT, NONE); - PIN_SLP(gpb-1, INPUT, NONE); - PIN_SLP(gpb-2, INPUT, NONE); - PIN_SLP(gpb-3, INPUT, NONE); - PIN_SLP(gpb-4, INPUT, DOWN); - PIN_SLP(gpb-5, INPUT, UP); - PIN_SLP(gpb-6, INPUT, DOWN); - PIN_SLP(gpb-7, INPUT, DOWN); - - PIN_SLP(gpc0-0, INPUT, DOWN); - PIN_SLP(gpc0-1, INPUT, DOWN); - PIN_SLP(gpc0-2, INPUT, DOWN); - PIN_SLP(gpc0-3, INPUT, DOWN); - PIN_SLP(gpc0-4, INPUT, DOWN); - - PIN_SLP(gpc1-0, INPUT, NONE); - PIN_SLP(gpc1-1, PREV, NONE); - PIN_SLP(gpc1-2, INPUT, NONE); - PIN_SLP(gpc1-3, INPUT, NONE); - PIN_SLP(gpc1-4, INPUT, NONE); - - PIN_SLP(gpd0-0, INPUT, DOWN); - PIN_SLP(gpd0-1, INPUT, DOWN); - PIN_SLP(gpd0-2, INPUT, NONE); - PIN_SLP(gpd0-3, INPUT, NONE); - - PIN_SLP(gpd1-0, INPUT, DOWN); - PIN_SLP(gpd1-1, INPUT, DOWN); - PIN_SLP(gpd1-2, INPUT, NONE); - PIN_SLP(gpd1-3, INPUT, NONE); - - PIN_SLP(gpf0-0, INPUT, NONE); - PIN_SLP(gpf0-1, INPUT, NONE); - PIN_SLP(gpf0-2, INPUT, DOWN); - PIN_SLP(gpf0-3, INPUT, DOWN); - PIN_SLP(gpf0-4, INPUT, NONE); - PIN_SLP(gpf0-5, INPUT, DOWN); - PIN_SLP(gpf0-6, INPUT, NONE); - PIN_SLP(gpf0-7, INPUT, DOWN); - - PIN_SLP(gpf1-0, INPUT, DOWN); - PIN_SLP(gpf1-1, INPUT, DOWN); - PIN_SLP(gpf1-2, INPUT, DOWN); - PIN_SLP(gpf1-3, INPUT, DOWN); - PIN_SLP(gpf1-4, INPUT, NONE); - PIN_SLP(gpf1-5, INPUT, NONE); - PIN_SLP(gpf1-6, INPUT, DOWN); - PIN_SLP(gpf1-7, PREV, NONE); - - PIN_SLP(gpf2-0, PREV, NONE); - PIN_SLP(gpf2-1, INPUT, DOWN); - PIN_SLP(gpf2-2, INPUT, DOWN); - PIN_SLP(gpf2-3, INPUT, DOWN); - PIN_SLP(gpf2-4, INPUT, DOWN); - PIN_SLP(gpf2-5, INPUT, DOWN); - PIN_SLP(gpf2-6, INPUT, NONE); - PIN_SLP(gpf2-7, INPUT, NONE); - - PIN_SLP(gpf3-0, INPUT, NONE); - PIN_SLP(gpf3-1, PREV, NONE); - PIN_SLP(gpf3-2, PREV, NONE); - PIN_SLP(gpf3-3, PREV, NONE); - PIN_SLP(gpf3-4, OUT1, NONE); - PIN_SLP(gpf3-5, INPUT, DOWN); - - PIN_SLP(gpj0-0, PREV, NONE); - PIN_SLP(gpj0-1, PREV, NONE); - PIN_SLP(gpj0-2, PREV, NONE); - PIN_SLP(gpj0-3, INPUT, DOWN); - PIN_SLP(gpj0-4, PREV, NONE); - PIN_SLP(gpj0-5, PREV, NONE); - PIN_SLP(gpj0-6, INPUT, DOWN); - PIN_SLP(gpj0-7, INPUT, DOWN); - - PIN_SLP(gpj1-0, INPUT, DOWN); - PIN_SLP(gpj1-1, PREV, NONE); - PIN_SLP(gpj1-2, PREV, NONE); - PIN_SLP(gpj1-3, INPUT, DOWN); - PIN_SLP(gpj1-4, INPUT, DOWN); - }; -}; - -&pinctrl_1 { - pinctrl-names = "default"; - pinctrl-0 = <&sleep1>; - - hdmi_hpd: hdmi-hpd { - samsung,pins = "gpx3-7"; - samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; - }; - - sleep1: sleep-states { - PIN_SLP(gpk0-0, PREV, NONE); - PIN_SLP(gpk0-1, PREV, NONE); - PIN_SLP(gpk0-2, OUT0, NONE); - PIN_SLP(gpk0-3, PREV, NONE); - PIN_SLP(gpk0-4, PREV, NONE); - PIN_SLP(gpk0-5, PREV, NONE); - PIN_SLP(gpk0-6, PREV, NONE); - - PIN_SLP(gpk1-0, INPUT, DOWN); - PIN_SLP(gpk1-1, INPUT, DOWN); - PIN_SLP(gpk1-2, INPUT, DOWN); - PIN_SLP(gpk1-3, PREV, NONE); - PIN_SLP(gpk1-4, PREV, NONE); - PIN_SLP(gpk1-5, PREV, NONE); - PIN_SLP(gpk1-6, PREV, NONE); - - PIN_SLP(gpk2-0, INPUT, DOWN); - PIN_SLP(gpk2-1, INPUT, DOWN); - PIN_SLP(gpk2-2, INPUT, DOWN); - PIN_SLP(gpk2-3, INPUT, DOWN); - PIN_SLP(gpk2-4, INPUT, DOWN); - PIN_SLP(gpk2-5, INPUT, DOWN); - PIN_SLP(gpk2-6, INPUT, DOWN); - - PIN_SLP(gpk3-0, OUT0, NONE); - PIN_SLP(gpk3-1, INPUT, NONE); - PIN_SLP(gpk3-2, INPUT, DOWN); - PIN_SLP(gpk3-3, INPUT, NONE); - PIN_SLP(gpk3-4, INPUT, NONE); - PIN_SLP(gpk3-5, INPUT, NONE); - PIN_SLP(gpk3-6, INPUT, NONE); - - PIN_SLP(gpl0-0, INPUT, DOWN); - PIN_SLP(gpl0-1, INPUT, DOWN); - PIN_SLP(gpl0-2, INPUT, DOWN); - PIN_SLP(gpl0-3, INPUT, DOWN); - PIN_SLP(gpl0-4, PREV, NONE); - PIN_SLP(gpl0-6, PREV, NONE); - - PIN_SLP(gpl1-0, INPUT, DOWN); - PIN_SLP(gpl1-1, INPUT, DOWN); - PIN_SLP(gpl2-0, INPUT, DOWN); - PIN_SLP(gpl2-1, INPUT, DOWN); - PIN_SLP(gpl2-2, INPUT, DOWN); - PIN_SLP(gpl2-3, INPUT, DOWN); - PIN_SLP(gpl2-4, INPUT, DOWN); - PIN_SLP(gpl2-5, INPUT, DOWN); - PIN_SLP(gpl2-6, PREV, NONE); - PIN_SLP(gpl2-7, INPUT, DOWN); - - PIN_SLP(gpm0-0, INPUT, DOWN); - PIN_SLP(gpm0-1, INPUT, DOWN); - PIN_SLP(gpm0-2, INPUT, DOWN); - PIN_SLP(gpm0-3, INPUT, DOWN); - PIN_SLP(gpm0-4, INPUT, DOWN); - PIN_SLP(gpm0-5, INPUT, DOWN); - PIN_SLP(gpm0-6, INPUT, DOWN); - PIN_SLP(gpm0-7, INPUT, DOWN); - - PIN_SLP(gpm1-0, INPUT, DOWN); - PIN_SLP(gpm1-1, INPUT, DOWN); - PIN_SLP(gpm1-2, INPUT, NONE); - PIN_SLP(gpm1-3, INPUT, NONE); - PIN_SLP(gpm1-4, INPUT, NONE); - PIN_SLP(gpm1-5, INPUT, NONE); - PIN_SLP(gpm1-6, INPUT, DOWN); - - PIN_SLP(gpm2-0, INPUT, NONE); - PIN_SLP(gpm2-1, INPUT, NONE); - PIN_SLP(gpm2-2, INPUT, DOWN); - PIN_SLP(gpm2-3, INPUT, DOWN); - PIN_SLP(gpm2-4, INPUT, DOWN); - - PIN_SLP(gpm3-0, PREV, NONE); - PIN_SLP(gpm3-1, PREV, NONE); - PIN_SLP(gpm3-2, PREV, NONE); - PIN_SLP(gpm3-3, OUT1, NONE); - PIN_SLP(gpm3-4, INPUT, DOWN); - PIN_SLP(gpm3-5, INPUT, DOWN); - PIN_SLP(gpm3-6, INPUT, DOWN); - PIN_SLP(gpm3-7, INPUT, DOWN); - - PIN_SLP(gpm4-0, INPUT, DOWN); - PIN_SLP(gpm4-1, INPUT, DOWN); - PIN_SLP(gpm4-2, INPUT, DOWN); - PIN_SLP(gpm4-3, INPUT, DOWN); - PIN_SLP(gpm4-4, INPUT, DOWN); - PIN_SLP(gpm4-5, INPUT, DOWN); - PIN_SLP(gpm4-6, INPUT, DOWN); - PIN_SLP(gpm4-7, INPUT, DOWN); - - PIN_SLP(gpy0-0, INPUT, DOWN); - PIN_SLP(gpy0-1, INPUT, DOWN); - PIN_SLP(gpy0-2, INPUT, DOWN); - PIN_SLP(gpy0-3, INPUT, DOWN); - PIN_SLP(gpy0-4, INPUT, DOWN); - PIN_SLP(gpy0-5, INPUT, DOWN); - - PIN_SLP(gpy1-0, INPUT, DOWN); - PIN_SLP(gpy1-1, INPUT, DOWN); - PIN_SLP(gpy1-2, INPUT, DOWN); - PIN_SLP(gpy1-3, INPUT, DOWN); - - PIN_SLP(gpy2-0, PREV, NONE); - PIN_SLP(gpy2-1, INPUT, DOWN); - PIN_SLP(gpy2-2, INPUT, NONE); - PIN_SLP(gpy2-3, INPUT, NONE); - PIN_SLP(gpy2-4, INPUT, NONE); - PIN_SLP(gpy2-5, INPUT, NONE); - - PIN_SLP(gpy3-0, INPUT, DOWN); - PIN_SLP(gpy3-1, INPUT, DOWN); - PIN_SLP(gpy3-2, INPUT, DOWN); - PIN_SLP(gpy3-3, INPUT, DOWN); - PIN_SLP(gpy3-4, INPUT, DOWN); - PIN_SLP(gpy3-5, INPUT, DOWN); - PIN_SLP(gpy3-6, INPUT, DOWN); - PIN_SLP(gpy3-7, INPUT, DOWN); - - PIN_SLP(gpy4-0, INPUT, DOWN); - PIN_SLP(gpy4-1, INPUT, DOWN); - PIN_SLP(gpy4-2, INPUT, DOWN); - PIN_SLP(gpy4-3, INPUT, DOWN); - PIN_SLP(gpy4-4, INPUT, DOWN); - PIN_SLP(gpy4-5, INPUT, DOWN); - PIN_SLP(gpy4-6, INPUT, DOWN); - PIN_SLP(gpy4-7, INPUT, DOWN); - - PIN_SLP(gpy5-0, INPUT, DOWN); - PIN_SLP(gpy5-1, INPUT, DOWN); - PIN_SLP(gpy5-2, INPUT, DOWN); - PIN_SLP(gpy5-3, INPUT, DOWN); - PIN_SLP(gpy5-4, INPUT, DOWN); - PIN_SLP(gpy5-5, INPUT, DOWN); - PIN_SLP(gpy5-6, INPUT, DOWN); - PIN_SLP(gpy5-7, INPUT, DOWN); - - PIN_SLP(gpy6-0, INPUT, DOWN); - PIN_SLP(gpy6-1, INPUT, DOWN); - PIN_SLP(gpy6-2, INPUT, DOWN); - PIN_SLP(gpy6-3, INPUT, DOWN); - PIN_SLP(gpy6-4, INPUT, DOWN); - PIN_SLP(gpy6-5, INPUT, DOWN); - PIN_SLP(gpy6-6, INPUT, DOWN); - PIN_SLP(gpy6-7, INPUT, DOWN); - }; -}; - -&pinctrl_2 { - pinctrl-names = "default"; - pinctrl-0 = <&sleep2>; - - sleep2: sleep-states { - PIN_SLP(gpz-0, INPUT, DOWN); - PIN_SLP(gpz-1, INPUT, DOWN); - PIN_SLP(gpz-2, INPUT, DOWN); - PIN_SLP(gpz-3, INPUT, DOWN); - PIN_SLP(gpz-4, INPUT, DOWN); - PIN_SLP(gpz-5, INPUT, DOWN); - PIN_SLP(gpz-6, INPUT, DOWN); - }; -}; - -&pinctrl_3 { - pinctrl-names = "default"; - pinctrl-0 = <&sleep3>; - - sleep3: sleep-states { - PIN_SLP(gpv0-0, INPUT, DOWN); - PIN_SLP(gpv0-1, INPUT, DOWN); - PIN_SLP(gpv0-2, INPUT, DOWN); - PIN_SLP(gpv0-3, INPUT, DOWN); - PIN_SLP(gpv0-4, INPUT, DOWN); - PIN_SLP(gpv0-5, INPUT, DOWN); - PIN_SLP(gpv0-6, INPUT, DOWN); - PIN_SLP(gpv0-7, INPUT, DOWN); - - PIN_SLP(gpv1-0, INPUT, DOWN); - PIN_SLP(gpv1-1, INPUT, DOWN); - PIN_SLP(gpv1-2, INPUT, DOWN); - PIN_SLP(gpv1-3, INPUT, DOWN); - PIN_SLP(gpv1-4, INPUT, DOWN); - PIN_SLP(gpv1-5, INPUT, DOWN); - PIN_SLP(gpv1-6, INPUT, DOWN); - PIN_SLP(gpv1-7, INPUT, DOWN); - - PIN_SLP(gpv2-0, INPUT, DOWN); - PIN_SLP(gpv2-1, INPUT, DOWN); - PIN_SLP(gpv2-2, INPUT, DOWN); - PIN_SLP(gpv2-3, INPUT, DOWN); - PIN_SLP(gpv2-4, INPUT, DOWN); - PIN_SLP(gpv2-5, INPUT, DOWN); - PIN_SLP(gpv2-6, INPUT, DOWN); - PIN_SLP(gpv2-7, INPUT, DOWN); - - PIN_SLP(gpv3-0, INPUT, DOWN); - PIN_SLP(gpv3-1, INPUT, DOWN); - PIN_SLP(gpv3-2, INPUT, DOWN); - PIN_SLP(gpv3-3, INPUT, DOWN); - PIN_SLP(gpv3-4, INPUT, DOWN); - PIN_SLP(gpv3-5, INPUT, DOWN); - PIN_SLP(gpv3-6, INPUT, DOWN); - PIN_SLP(gpv3-7, INPUT, DOWN); - - PIN_SLP(gpv4-0, INPUT, DOWN); - }; -}; - -&pwm { - pinctrl-0 = <&pwm0_out>; - pinctrl-names = "default"; - samsung,pwm-outputs = <0>; - status = "okay"; -}; - -&rtc { - status = "okay"; - clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; - clock-names = "rtc", "rtc_src"; -}; - -&sdhci_2 { - bus-width = <4>; - cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; - cd-inverted; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; - pinctrl-names = "default"; - vmmc-supply = <&ldo21_reg>; - status = "okay"; -}; - -&sdhci_3 { - #address-cells = <1>; - #size-cells = <0>; - non-removable; - bus-width = <4>; - - mmc-pwrseq = <&wlan_pwrseq>; - pinctrl-names = "default"; - pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - interrupt-parent = <&gpx2>; - interrupts = <5 IRQ_TYPE_NONE>; - interrupt-names = "host-wake"; - }; -}; - -&serial_0 { - status = "okay"; -}; - -&serial_1 { - status = "okay"; -}; - -&serial_2 { - status = "okay"; -}; - -&serial_3 { - status = "okay"; -}; - -&spi_1 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_bus>; - cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; - status = "okay"; - - s5c73m3_spi: s5c73m3@0 { - compatible = "samsung,s5c73m3"; - spi-max-frequency = <50000000>; - reg = <0>; - controller-data { - samsung,spi-feedback-delay = <2>; - }; - }; -}; - -&tmu { - vtmu-supply = <&ldo10_reg>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index e4ad2fc0329ee..2ae1ab602f4bd 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -15,7 +15,7 @@ */ #include "exynos4.dtsi" -#include "exynos4412-pinctrl.dtsi" + #include "exynos4-cpu-thermal.dtsi" / { @@ -42,8 +42,6 @@ clocks = <&clock CLK_ARM_CLK>; clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; - cooling-min-level = <13>; - cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ }; @@ -147,463 +145,410 @@ }; }; - sysram@2020000 { - compatible = "mmio-sram"; - reg = <0x02020000 0x40000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x02020000 0x40000>; - smp-sysram@0 { - compatible = "samsung,exynos4210-sysram"; - reg = <0x0 0x1000>; - }; + soc: soc { - smp-sysram@2f000 { - compatible = "samsung,exynos4210-sysram-ns"; - reg = <0x2f000 0x1000>; + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; }; - }; - - pd_isp: isp-power-domain@10023ca0 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10023CA0 0x20>; - #power-domain-cells = <0>; - label = "ISP"; - }; - - l2c: l2-cache-controller@10502000 { - compatible = "arm,pl310-cache"; - reg = <0x10502000 0x1000>; - cache-unified; - cache-level = <2>; - arm,tag-latency = <2 2 1>; - arm,data-latency = <3 2 1>; - arm,double-linefill = <1>; - arm,double-linefill-incr = <0>; - arm,double-linefill-wrap = <1>; - arm,prefetch-drop = <1>; - arm,prefetch-offset = <7>; - }; - clock: clock-controller@10030000 { - compatible = "samsung,exynos4412-clock"; - reg = <0x10030000 0x18000>; - #clock-cells = <1>; - }; - - isp_clock: clock-controller@10048000 { - compatible = "samsung,exynos4412-isp-clock"; - reg = <0x10048000 0x1000>; - #clock-cells = <1>; - power-domains = <&pd_isp>; - clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>; - clock-names = "aclk200", "aclk400_mcuisp"; - }; + pinctrl_1: pinctrl@11000000 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x11000000 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - mct@10050000 { - compatible = "samsung,exynos4412-mct"; - reg = <0x10050000 0x800>; - interrupt-parent = <&mct_map>; - interrupts = <0>, <1>, <2>, <3>, <4>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; - clock-names = "fin_pll", "mct"; - - mct_map: mct-map { - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, - <1 &combiner 12 5>, - <2 &combiner 12 6>, - <3 &combiner 12 7>, - <4 &gic 1 12 IRQ_TYPE_LEVEL_HIGH>; + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; }; - }; - - watchdog: watchdog@10060000 { - compatible = "samsung,exynos5250-wdt"; - reg = <0x10060000 0x100>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_WDT>; - clock-names = "watchdog"; - samsung,syscon-phandle = <&pmu_system_controller>; - }; - - adc: adc@126c0000 { - compatible = "samsung,exynos-adc-v1"; - reg = <0x126C0000 0x100>; - interrupt-parent = <&combiner>; - interrupts = <10 3>; - clocks = <&clock CLK_TSADC>; - clock-names = "adc"; - #io-channel-cells = <1>; - io-channel-ranges; - samsung,syscon-phandle = <&pmu_system_controller>; - status = "disabled"; - }; - - g2d: g2d@10800000 { - compatible = "samsung,exynos4212-g2d"; - reg = <0x10800000 0x1000>; - interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; - clock-names = "sclk_fimg2d", "fimg2d"; - iommus = <&sysmmu_g2d>; - }; - - camera { - clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>, - <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>; - clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; - /* fimc_[0-3] are configured outside, under phandles */ - fimc_lite_0: fimc-lite@12390000 { - compatible = "samsung,exynos4212-fimc-lite"; - reg = <0x12390000 0x1000>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&pd_isp>; - clocks = <&isp_clock CLK_ISP_FIMC_LITE0>; - clock-names = "flite"; - iommus = <&sysmmu_fimc_lite0>; - status = "disabled"; + pinctrl_2: pinctrl@3860000 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x03860000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <10 0>; }; - fimc_lite_1: fimc-lite@123a0000 { - compatible = "samsung,exynos4212-fimc-lite"; - reg = <0x123A0000 0x1000>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&pd_isp>; - clocks = <&isp_clock CLK_ISP_FIMC_LITE1>; - clock-names = "flite"; - iommus = <&sysmmu_fimc_lite1>; - status = "disabled"; + pinctrl_3: pinctrl@106e0000 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x106E0000 0x1000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; }; - fimc_is: fimc-is@12000000 { - compatible = "samsung,exynos4212-fimc-is"; - reg = <0x12000000 0x260000>; - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&pd_isp>; - clocks = <&isp_clock CLK_ISP_FIMC_LITE0>, - <&isp_clock CLK_ISP_FIMC_LITE1>, - <&isp_clock CLK_ISP_PPMUISPX>, - <&isp_clock CLK_ISP_PPMUISPMX>, - <&isp_clock CLK_ISP_FIMC_ISP>, - <&isp_clock CLK_ISP_FIMC_DRC>, - <&isp_clock CLK_ISP_FIMC_FD>, - <&isp_clock CLK_ISP_MCUISP>, - <&isp_clock CLK_ISP_GICISP>, - <&isp_clock CLK_ISP_MCUCTL_ISP>, - <&isp_clock CLK_ISP_PWM_ISP>, - <&isp_clock CLK_ISP_DIV_ISP0>, - <&isp_clock CLK_ISP_DIV_ISP1>, - <&isp_clock CLK_ISP_DIV_MCUISP0>, - <&isp_clock CLK_ISP_DIV_MCUISP1>, - <&clock CLK_MOUT_MPLL_USER_T>, - <&clock CLK_ACLK200>, - <&clock CLK_ACLK400_MCUISP>, - <&clock CLK_DIV_ACLK200>, - <&clock CLK_DIV_ACLK400_MCUISP>, - <&clock CLK_UART_ISP_SCLK>; - clock-names = "lite0", "lite1", "ppmuispx", - "ppmuispmx", "isp", - "drc", "fd", "mcuisp", - "gicisp", "mcuctl_isp", "pwm_isp", - "ispdiv0", "ispdiv1", "mcuispdiv0", - "mcuispdiv1", "mpll", "aclk200", - "aclk400mcuisp", "div_aclk200", - "div_aclk400mcuisp", "uart"; - iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>, - <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; - iommu-names = "isp", "drc", "fd", "mcuctl"; + sysram@2020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x40000>; #address-cells = <1>; #size-cells = <1>; - ranges; - status = "disabled"; + ranges = <0 0x02020000 0x40000>; - pmu@10020000 { - reg = <0x10020000 0x3000>; + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; }; - i2c1_isp: i2c-isp@12140000 { - compatible = "samsung,exynos4212-i2c-isp"; - reg = <0x12140000 0x100>; - clocks = <&isp_clock CLK_ISP_I2C1_ISP>; - clock-names = "i2c_isp"; - #address-cells = <1>; - #size-cells = <0>; + smp-sysram@2f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x2f000 0x1000>; }; }; - }; - - mshc_0: mmc@12550000 { - compatible = "samsung,exynos4412-dw-mshc"; - reg = <0x12550000 0x1000>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - fifo-depth = <0x80>; - clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>; - clock-names = "biu", "ciu"; - status = "disabled"; - }; - - sysmmu_g2d: sysmmu@10A40000{ - compatible = "samsung,exynos-sysmmu"; - reg = <0x10A40000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <4 7>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_isp: sysmmu@12260000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x12260000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 2>; - power-domains = <&pd_isp>; - clock-names = "sysmmu"; - clocks = <&isp_clock CLK_ISP_SMMU_ISP>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_drc: sysmmu@12270000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x12270000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 3>; - power-domains = <&pd_isp>; - clock-names = "sysmmu"; - clocks = <&isp_clock CLK_ISP_SMMU_DRC>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_fd: sysmmu@122a0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x122A0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 4>; - power-domains = <&pd_isp>; - clock-names = "sysmmu"; - clocks = <&isp_clock CLK_ISP_SMMU_FD>; - #iommu-cells = <0>; - }; - - sysmmu_fimc_mcuctl: sysmmu@122b0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x122B0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 5>; - power-domains = <&pd_isp>; - clock-names = "sysmmu"; - clocks = <&isp_clock CLK_ISP_SMMU_ISPCX>; - #iommu-cells = <0>; - }; - sysmmu_fimc_lite0: sysmmu@123b0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x123B0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 0>; - power-domains = <&pd_isp>; - clock-names = "sysmmu", "master"; - clocks = <&isp_clock CLK_ISP_SMMU_LITE0>, - <&isp_clock CLK_ISP_FIMC_LITE0>; - #iommu-cells = <0>; - }; + pd_isp: isp-power-domain@10023ca0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CA0 0x20>; + #power-domain-cells = <0>; + label = "ISP"; + }; - sysmmu_fimc_lite1: sysmmu@123c0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x123C0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <16 1>; - power-domains = <&pd_isp>; - clock-names = "sysmmu", "master"; - clocks = <&isp_clock CLK_ISP_SMMU_LITE1>, - <&isp_clock CLK_ISP_FIMC_LITE1>; - #iommu-cells = <0>; - }; + l2c: l2-cache-controller@10502000 { + compatible = "arm,pl310-cache"; + reg = <0x10502000 0x1000>; + cache-unified; + cache-level = <2>; + arm,tag-latency = <2 2 1>; + arm,data-latency = <3 2 1>; + arm,double-linefill = <1>; + arm,double-linefill-incr = <0>; + arm,double-linefill-wrap = <1>; + arm,prefetch-drop = <1>; + arm,prefetch-offset = <7>; + }; - bus_dmc: bus_dmc { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_DMC>; - clock-names = "bus"; - operating-points-v2 = <&bus_dmc_opp_table>; - status = "disabled"; - }; + clock: clock-controller@10030000 { + compatible = "samsung,exynos4412-clock"; + reg = <0x10030000 0x18000>; + #clock-cells = <1>; + }; - bus_acp: bus_acp { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_ACP>; - clock-names = "bus"; - operating-points-v2 = <&bus_acp_opp_table>; - status = "disabled"; - }; + isp_clock: clock-controller@10048000 { + compatible = "samsung,exynos4412-isp-clock"; + reg = <0x10048000 0x1000>; + #clock-cells = <1>; + power-domains = <&pd_isp>; + clocks = <&clock CLK_ACLK200>, + <&clock CLK_ACLK400_MCUISP>; + clock-names = "aclk200", "aclk400_mcuisp"; + }; + + mct@10050000 { + compatible = "samsung,exynos4412-mct"; + reg = <0x10050000 0x800>; + interrupt-parent = <&mct_map>; + interrupts = <0>, <1>, <2>, <3>, <4>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = + <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, + <1 &combiner 12 5>, + <2 &combiner 12 6>, + <3 &combiner 12 7>, + <4 &gic 1 12 IRQ_TYPE_LEVEL_HIGH>; + }; + }; - bus_c2c: bus_c2c { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_C2C>; - clock-names = "bus"; - operating-points-v2 = <&bus_dmc_opp_table>; - status = "disabled"; - }; + watchdog: watchdog@10060000 { + compatible = "samsung,exynos5250-wdt"; + reg = <0x10060000 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_WDT>; + clock-names = "watchdog"; + samsung,syscon-phandle = <&pmu_system_controller>; + }; + + adc: adc@126c0000 { + compatible = "samsung,exynos-adc-v1"; + reg = <0x126C0000 0x100>; + interrupt-parent = <&combiner>; + interrupts = <10 3>; + clocks = <&clock CLK_TSADC>; + clock-names = "adc"; + #io-channel-cells = <1>; + io-channel-ranges; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; + }; - bus_dmc_opp_table: opp_table1 { - compatible = "operating-points-v2"; - opp-shared; + g2d: g2d@10800000 { + compatible = "samsung,exynos4212-g2d"; + reg = <0x10800000 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; + clock-names = "sclk_fimg2d", "fimg2d"; + iommus = <&sysmmu_g2d>; + }; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <900000>; + mshc_0: mmc@12550000 { + compatible = "samsung,exynos4412-dw-mshc"; + reg = <0x12550000 0x1000>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <0x80>; + clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>; + clock-names = "biu", "ciu"; + status = "disabled"; }; - opp-134000000 { - opp-hz = /bits/ 64 <134000000>; - opp-microvolt = <900000>; + + sysmmu_g2d: sysmmu@10A40000{ + compatible = "samsung,exynos-sysmmu"; + reg = <0x10A40000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 7>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; + #iommu-cells = <0>; }; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; - opp-microvolt = <900000>; + + sysmmu_fimc_isp: sysmmu@12260000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12260000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 2>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&isp_clock CLK_ISP_SMMU_ISP>; + #iommu-cells = <0>; }; - opp-267000000 { - opp-hz = /bits/ 64 <267000000>; - opp-microvolt = <950000>; + + sysmmu_fimc_drc: sysmmu@12270000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12270000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 3>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&isp_clock CLK_ISP_SMMU_DRC>; + #iommu-cells = <0>; }; - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <1050000>; + + sysmmu_fimc_fd: sysmmu@122a0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x122A0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 4>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&isp_clock CLK_ISP_SMMU_FD>; + #iommu-cells = <0>; }; - }; - bus_acp_opp_table: opp_table2 { - compatible = "operating-points-v2"; - opp-shared; + sysmmu_fimc_mcuctl: sysmmu@122b0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x122B0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 5>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&isp_clock CLK_ISP_SMMU_ISPCX>; + #iommu-cells = <0>; + }; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; + sysmmu_fimc_lite0: sysmmu@123b0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x123B0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 0>; + power-domains = <&pd_isp>; + clock-names = "sysmmu", "master"; + clocks = <&isp_clock CLK_ISP_SMMU_LITE0>, + <&isp_clock CLK_ISP_FIMC_LITE0>; + #iommu-cells = <0>; }; - opp-134000000 { - opp-hz = /bits/ 64 <134000000>; + + sysmmu_fimc_lite1: sysmmu@123c0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x123C0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 1>; + power-domains = <&pd_isp>; + clock-names = "sysmmu", "master"; + clocks = <&isp_clock CLK_ISP_SMMU_LITE1>, + <&isp_clock CLK_ISP_FIMC_LITE1>; + #iommu-cells = <0>; }; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; + + bus_dmc: bus_dmc { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_DMC>; + clock-names = "bus"; + operating-points-v2 = <&bus_dmc_opp_table>; + status = "disabled"; }; - opp-267000000 { - opp-hz = /bits/ 64 <267000000>; + + bus_acp: bus_acp { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_ACP>; + clock-names = "bus"; + operating-points-v2 = <&bus_acp_opp_table>; + status = "disabled"; }; - }; - bus_leftbus: bus_leftbus { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_GDL>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; + bus_c2c: bus_c2c { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_C2C>; + clock-names = "bus"; + operating-points-v2 = <&bus_dmc_opp_table>; + status = "disabled"; + }; - bus_rightbus: bus_rightbus { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DIV_GDR>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; + bus_dmc_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; - bus_display: bus_display { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_ACLK160>; - clock-names = "bus"; - operating-points-v2 = <&bus_display_opp_table>; - status = "disabled"; - }; + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <900000>; + }; + opp-134000000 { + opp-hz = /bits/ 64 <134000000>; + opp-microvolt = <900000>; + }; + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <900000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <950000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1050000>; + }; + }; - bus_fsys: bus_fsys { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_ACLK133>; - clock-names = "bus"; - operating-points-v2 = <&bus_fsys_opp_table>; - status = "disabled"; - }; + bus_acp_opp_table: opp_table2 { + compatible = "operating-points-v2"; + opp-shared; - bus_peri: bus_peri { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_ACLK100>; - clock-names = "bus"; - operating-points-v2 = <&bus_peri_opp_table>; - status = "disabled"; - }; + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + opp-134000000 { + opp-hz = /bits/ 64 <134000000>; + }; + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + }; + }; - bus_mfc: bus_mfc { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_SCLK_MFC>; - clock-names = "bus"; - operating-points-v2 = <&bus_leftbus_opp_table>; - status = "disabled"; - }; + bus_leftbus: bus_leftbus { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_GDL>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; - bus_leftbus_opp_table: opp_table3 { - compatible = "operating-points-v2"; - opp-shared; + bus_rightbus: bus_rightbus { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_GDR>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; + }; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <900000>; + bus_display: bus_display { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_ACLK160>; + clock-names = "bus"; + operating-points-v2 = <&bus_display_opp_table>; + status = "disabled"; }; - opp-134000000 { - opp-hz = /bits/ 64 <134000000>; - opp-microvolt = <925000>; + + bus_fsys: bus_fsys { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_ACLK133>; + clock-names = "bus"; + operating-points-v2 = <&bus_fsys_opp_table>; + status = "disabled"; }; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; - opp-microvolt = <950000>; + + bus_peri: bus_peri { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_ACLK100>; + clock-names = "bus"; + operating-points-v2 = <&bus_peri_opp_table>; + status = "disabled"; }; - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - opp-microvolt = <1000000>; + + bus_mfc: bus_mfc { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_SCLK_MFC>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + status = "disabled"; }; - }; - bus_display_opp_table: opp_table4 { - compatible = "operating-points-v2"; - opp-shared; + bus_leftbus_opp_table: opp_table3 { + compatible = "operating-points-v2"; + opp-shared; - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; - }; - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <900000>; + }; + opp-134000000 { + opp-hz = /bits/ 64 <134000000>; + opp-microvolt = <925000>; + }; + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <950000>; + }; + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <1000000>; + }; }; - }; - bus_fsys_opp_table: opp_table5 { - compatible = "operating-points-v2"; - opp-shared; + bus_display_opp_table: opp_table4 { + compatible = "operating-points-v2"; + opp-shared; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - }; - opp-134000000 { - opp-hz = /bits/ 64 <134000000>; + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + }; + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; }; - }; - bus_peri_opp_table: opp_table6 { - compatible = "operating-points-v2"; - opp-shared; + bus_fsys_opp_table: opp_table5 { + compatible = "operating-points-v2"; + opp-shared; - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - }; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + opp-134000000 { + opp-hz = /bits/ 64 <134000000>; + }; }; - }; - pmu { - interrupts = <2 2>, <3 2>, <18 2>, <19 2>; + bus_peri_opp_table: opp_table6 { + compatible = "operating-points-v2"; + opp-shared; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + }; + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + }; }; }; @@ -631,6 +576,92 @@ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; }; +&camera { + clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>, + <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>; + clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; + + /* fimc_[0-3] are configured outside, under phandles */ + fimc_lite_0: fimc-lite@12390000 { + compatible = "samsung,exynos4212-fimc-lite"; + reg = <0x12390000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_isp>; + clocks = <&isp_clock CLK_ISP_FIMC_LITE0>; + clock-names = "flite"; + iommus = <&sysmmu_fimc_lite0>; + status = "disabled"; + }; + + fimc_lite_1: fimc-lite@123a0000 { + compatible = "samsung,exynos4212-fimc-lite"; + reg = <0x123A0000 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_isp>; + clocks = <&isp_clock CLK_ISP_FIMC_LITE1>; + clock-names = "flite"; + iommus = <&sysmmu_fimc_lite1>; + status = "disabled"; + }; + + fimc_is: fimc-is@12000000 { + compatible = "samsung,exynos4212-fimc-is"; + reg = <0x12000000 0x260000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd_isp>; + clocks = <&isp_clock CLK_ISP_FIMC_LITE0>, + <&isp_clock CLK_ISP_FIMC_LITE1>, + <&isp_clock CLK_ISP_PPMUISPX>, + <&isp_clock CLK_ISP_PPMUISPMX>, + <&isp_clock CLK_ISP_FIMC_ISP>, + <&isp_clock CLK_ISP_FIMC_DRC>, + <&isp_clock CLK_ISP_FIMC_FD>, + <&isp_clock CLK_ISP_MCUISP>, + <&isp_clock CLK_ISP_GICISP>, + <&isp_clock CLK_ISP_MCUCTL_ISP>, + <&isp_clock CLK_ISP_PWM_ISP>, + <&isp_clock CLK_ISP_DIV_ISP0>, + <&isp_clock CLK_ISP_DIV_ISP1>, + <&isp_clock CLK_ISP_DIV_MCUISP0>, + <&isp_clock CLK_ISP_DIV_MCUISP1>, + <&clock CLK_MOUT_MPLL_USER_T>, + <&clock CLK_ACLK200>, + <&clock CLK_ACLK400_MCUISP>, + <&clock CLK_DIV_ACLK200>, + <&clock CLK_DIV_ACLK400_MCUISP>, + <&clock CLK_UART_ISP_SCLK>; + clock-names = "lite0", "lite1", "ppmuispx", + "ppmuispmx", "isp", + "drc", "fd", "mcuisp", + "gicisp", "mcuctl_isp", "pwm_isp", + "ispdiv0", "ispdiv1", "mcuispdiv0", + "mcuispdiv1", "mpll", "aclk200", + "aclk400mcuisp", "div_aclk200", + "div_aclk400mcuisp", "uart"; + iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>, + <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; + iommu-names = "isp", "drc", "fd", "mcuctl"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + pmu@10020000 { + reg = <0x10020000 0x3000>; + }; + + i2c1_isp: i2c-isp@12140000 { + compatible = "samsung,exynos4212-i2c-isp"; + reg = <0x12140000 0x100>; + clocks = <&isp_clock CLK_ISP_I2C1_ISP>; + clock-names = "i2c_isp"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + &exynos_usbphy { compatible = "samsung,exynos4x12-usb2-phy"; samsung,sysreg-phandle = <&sys_reg>; @@ -693,35 +724,8 @@ <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>; }; -&pinctrl_0 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x11400000 0x1000>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; -}; - -&pinctrl_1 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x11000000 0x1000>; - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - - wakup_eint: wakeup-interrupt-controller { - compatible = "samsung,exynos4210-wakeup-eint"; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - }; -}; - -&pinctrl_2 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x03860000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <10 0>; -}; - -&pinctrl_3 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x106E0000 0x1000>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; +&pmu { + interrupts = <2 2>, <3 2>, <18 2>, <19 2>; }; &pmu_system_controller { @@ -743,3 +747,5 @@ clock-names = "tmu_apbif"; status = "disabled"; }; + +#include "exynos4412-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 59cf1b202849b..fd9226d3b207e 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/clock/maxim,max77686.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/sound/samsung-i2s.h> #include "exynos5250.dtsi" / { @@ -225,6 +226,16 @@ }; }; +&clock { + assigned-clocks = <&clock CLK_FOUT_EPLL>; + assigned-clock-rates = <49152000>; +}; + +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-parents = <&clock CLK_FOUT_EPLL>; +}; + &cpu0 { cpu0-supply = <&buck2_reg>; }; @@ -513,6 +524,8 @@ }; &i2s0 { + assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; + assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>; status = "okay"; }; @@ -649,6 +662,11 @@ }; }; +&pmu_system_controller { + assigned-clocks = <&pmu_system_controller 0>; + assigned-clock-parents = <&clock CLK_FIN_PLL>; +}; + &rtc { status = "okay"; clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 4827cb506fa3a..75fdc5e6d423d 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -18,6 +18,14 @@ samsung,model = "Snow-I2S-MAX98095"; samsung,audio-codec = <&max98095>; + + cpu { + sound-dai = <&i2s0 0>; + }; + + codec { + sound-dai = <&max98095 0>, <&hdmi>; + }; }; }; @@ -27,6 +35,9 @@ reg = <0x11>; pinctrl-names = "default"; pinctrl-0 = <&max98095_en>; + clocks = <&pmu_system_controller 0>; + clock-names = "mclk"; + #sound-dai-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 56626d1a42353..45283a6c5eee7 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -77,8 +77,6 @@ 300000 937500 200000 925000 >; - cooling-min-level = <15>; - cooling-max-level = <9>; #cooling-cells = <2>; /* min followed by max */ }; cpu@1 { @@ -500,6 +498,8 @@ pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; power-domains = <&pd_mau>; + #clock-cells = <1>; + #sound-dai-cells = <1>; }; i2s1: i2s@12d60000 { @@ -514,6 +514,7 @@ pinctrl-names = "default"; pinctrl-0 = <&i2s1_bus>; power-domains = <&pd_mau>; + #sound-dai-cells = <1>; }; i2s2: i2s@12d70000 { @@ -528,6 +529,7 @@ pinctrl-names = "default"; pinctrl-0 = <&i2s2_bus>; power-domains = <&pd_mau>; + #sound-dai-cells = <1>; }; usb_dwc3 { @@ -655,7 +657,7 @@ power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL0>; clock-names = "gscl"; - iommu = <&sysmmu_gsc0>; + iommus = <&sysmmu_gsc0>; }; gsc_1: gsc@13e10000 { @@ -665,7 +667,7 @@ power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL1>; clock-names = "gscl"; - iommu = <&sysmmu_gsc1>; + iommus = <&sysmmu_gsc1>; }; gsc_2: gsc@13e20000 { @@ -675,7 +677,7 @@ power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL2>; clock-names = "gscl"; - iommu = <&sysmmu_gsc2>; + iommus = <&sysmmu_gsc2>; }; gsc_3: gsc@13e30000 { @@ -685,7 +687,7 @@ power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL3>; clock-names = "gscl"; - iommu = <&sysmmu_gsc3>; + iommus = <&sysmmu_gsc3>; }; hdmi: hdmi@14530000 { @@ -700,6 +702,7 @@ "sclk_hdmiphy", "mout_hdmi"; samsung,syscon-phandle = <&pmu_system_controller>; phy = <&hdmiphy>; + #sound-dai-cells = <0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts index 442eb0353f291..fa19c59b2fb6f 100644 --- a/arch/arm/boot/dts/exynos5260-xyref5260.dts +++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts @@ -65,7 +65,6 @@ &mmc_0 { status = "okay"; broken-cd; - bypass-smu; cap-mmc-highspeed; supports-hs200-mode; /* 200 MHz */ card-detect-delay = <200>; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 1886aa00b2dbd..55509c690328f 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -11,7 +11,6 @@ */ #include "exynos54xx.dtsi" -#include "exynos-syscon-restart.dtsi" #include <dt-bindings/clock/exynos5410.h> #include <dt-bindings/clock/exynos-audss-clk.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -197,9 +196,9 @@ interrupt-parent = <&gic>; ranges; - pdma0: pdma@12680000 { + pdma0: pdma@121a0000 { compatible = "arm,pl330", "arm,primecell"; - reg = <0x121A0000 0x1000>; + reg = <0x121a0000 0x1000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; @@ -208,9 +207,9 @@ #dma-requests = <32>; }; - pdma1: pdma@12690000 { + pdma1: pdma@121b0000 { compatible = "arm,pl330", "arm,primecell"; - reg = <0x121B0000 0x1000>; + reg = <0x121b0000 0x1000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi index 123f0cef658d6..a8e4494713048 100644 --- a/arch/arm/boot/dts/exynos5420-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi @@ -30,8 +30,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; @@ -43,8 +41,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; @@ -56,8 +52,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; @@ -69,8 +63,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; @@ -83,8 +75,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; @@ -96,8 +86,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; @@ -109,8 +97,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; @@ -122,8 +108,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <7>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 5a76ed77dda11..244f0091c21f5 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -11,6 +11,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/maxim,max77802.h> #include <dt-bindings/regulator/maxim,max77802.h> +#include <dt-bindings/sound/samsung-i2s.h> #include "exynos5420.dtsi" #include "exynos5420-cpus.dtsi" @@ -86,6 +87,14 @@ samsung,model = "Peach-Pit-I2S-MAX98090"; samsung,i2s-controller = <&i2s0>; samsung,audio-codec = <&max98090>; + + cpu { + sound-dai = <&i2s0 0>; + }; + + codec { + sound-dai = <&max98090>, <&hdmi>; + }; }; usb300_vbus_reg: regulator-usb300 { @@ -142,6 +151,11 @@ vdd-supply = <&ldo9_reg>; }; +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-parents = <&clock CLK_FOUT_EPLL>; +}; + &cpu0 { cpu-supply = <&buck2_reg>; }; @@ -606,6 +620,7 @@ pinctrl-0 = <&max98090_irq>; clocks = <&pmu_system_controller 0>; clock-names = "mclk"; + #sound-dai-cells = <0>; }; light-sensor@44 { @@ -690,6 +705,8 @@ }; &i2s0 { + assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; + assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi index c593809c7f08a..7c130a00d1a8b 100644 --- a/arch/arm/boot/dts/exynos5422-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi @@ -29,8 +29,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; @@ -42,8 +40,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; @@ -55,8 +51,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; @@ -68,8 +62,6 @@ clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; operating-points-v2 = <&cluster_a7_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <11>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; }; @@ -82,8 +74,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; @@ -95,8 +85,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; @@ -108,8 +96,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; @@ -121,8 +107,6 @@ clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; operating-points-v2 = <&cluster_a15_opp_table>; - cooling-min-level = <0>; - cooling-max-level = <15>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index fce9e26b59308..f3abecc446575 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -26,24 +26,6 @@ tmuctrl2 = &tmuctrl_2; }; - clock: clock-controller@160000 { - compatible = "samsung,exynos5440-clock"; - reg = <0x160000 0x1000>; - #clock-cells = <1>; - }; - - gic: interrupt-controller@2e0000 { - compatible = "arm,cortex-a15-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x2E1000 0x1000>, - <0x2E2000 0x2000>, - <0x2E4000 0x2000>, - <0x2E6000 0x2000>; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - }; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -70,182 +52,290 @@ }; }; - arm-pmu { - compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - }; + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; - timer { - compatible = "arm,cortex-a15-timer", - "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - clock-frequency = <50000000>; - }; + clock: clock-controller@160000 { + compatible = "samsung,exynos5440-clock"; + reg = <0x160000 0x1000>; + #clock-cells = <1>; + }; - cpufreq@160000 { - compatible = "samsung,exynos5440-cpufreq"; - reg = <0x160000 0x1000>; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; - operating-points = < - /* KHz uV */ - 1500000 1100000 - 1400000 1075000 - 1300000 1050000 - 1200000 1025000 - 1100000 1000000 - 1000000 975000 - 900000 950000 - 800000 925000 - >; - }; + gic: interrupt-controller@2e0000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x2E1000 0x1000>, + <0x2E2000 0x2000>, + <0x2E4000 0x2000>, + <0x2E6000 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; - serial_0: serial@b0000 { - compatible = "samsung,exynos4210-uart"; - reg = <0xB0000 0x1000>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_B_125>, <&clock CLK_B_125>; - clock-names = "uart", "clk_uart_baud0"; - }; - serial_1: serial@c0000 { - compatible = "samsung,exynos4210-uart"; - reg = <0xC0000 0x1000>; - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_B_125>, <&clock CLK_B_125>; - clock-names = "uart", "clk_uart_baud0"; - }; + arm-pmu { + compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + }; - spi_0: spi@d0000 { - compatible = "samsung,exynos5440-spi"; - reg = <0xD0000 0x100>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - samsung,spi-src-clk = <0>; - num-cs = <1>; - clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>; - clock-names = "spi", "spi_busclk0"; - }; + timer { + compatible = "arm,cortex-a15-timer", + "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <50000000>; + }; - pin_ctrl: pinctrl@e0000 { - compatible = "samsung,exynos5440-pinctrl"; - reg = <0xE0000 0x1000>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - #gpio-cells = <2>; + cpufreq@160000 { + compatible = "samsung,exynos5440-cpufreq"; + reg = <0x160000 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + operating-points = < + /* KHz uV */ + 1500000 1100000 + 1400000 1075000 + 1300000 1050000 + 1200000 1025000 + 1100000 1000000 + 1000000 975000 + 900000 950000 + 800000 925000 + >; + }; - fan: fan { - samsung,exynos5440-pin-function = <1>; + serial_0: serial@b0000 { + compatible = "samsung,exynos4210-uart"; + reg = <0xB0000 0x1000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_B_125>, <&clock CLK_B_125>; + clock-names = "uart", "clk_uart_baud0"; }; - hdd_led0: hdd_led0 { - samsung,exynos5440-pin-function = <2>; + serial_1: serial@c0000 { + compatible = "samsung,exynos4210-uart"; + reg = <0xC0000 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_B_125>, <&clock CLK_B_125>; + clock-names = "uart", "clk_uart_baud0"; }; - hdd_led1: hdd_led1 { - samsung,exynos5440-pin-function = <3>; + spi_0: spi@d0000 { + compatible = "samsung,exynos5440-spi"; + reg = <0xD0000 0x100>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + samsung,spi-src-clk = <0>; + num-cs = <1>; + clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>; + clock-names = "spi", "spi_busclk0"; }; - uart1: uart1 { - samsung,exynos5440-pin-function = <4>; + pin_ctrl: pinctrl@e0000 { + compatible = "samsung,exynos5440-pinctrl"; + reg = <0xE0000 0x1000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + #gpio-cells = <2>; + + fan: fan { + samsung,exynos5440-pin-function = <1>; + }; + + hdd_led0: hdd_led0 { + samsung,exynos5440-pin-function = <2>; + }; + + hdd_led1: hdd_led1 { + samsung,exynos5440-pin-function = <3>; + }; + + uart1: uart1 { + samsung,exynos5440-pin-function = <4>; + }; }; - }; - i2c@f0000 { - compatible = "samsung,exynos5440-i2c"; - reg = <0xF0000 0x1000>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_B_125>; - clock-names = "i2c"; - }; + i2c@f0000 { + compatible = "samsung,exynos5440-i2c"; + reg = <0xF0000 0x1000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_B_125>; + clock-names = "i2c"; + }; - i2c@100000 { - compatible = "samsung,exynos5440-i2c"; - reg = <0x100000 0x1000>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_B_125>; - clock-names = "i2c"; - }; + i2c@100000 { + compatible = "samsung,exynos5440-i2c"; + reg = <0x100000 0x1000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_B_125>; + clock-names = "i2c"; + }; - watchdog@110000 { - compatible = "samsung,s3c6410-wdt"; - reg = <0x110000 0x1000>; - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_B_125>; - clock-names = "watchdog"; - }; + watchdog@110000 { + compatible = "samsung,s3c6410-wdt"; + reg = <0x110000 0x1000>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_B_125>; + clock-names = "watchdog"; + }; - gmac: ethernet@230000 { - compatible = "snps,dwmac-3.70a", "snps,dwmac"; - reg = <0x00230000 0x8000>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - phy-mode = "sgmii"; - clocks = <&clock CLK_GMAC0>; - clock-names = "stmmaceth"; - }; + gmac: ethernet@230000 { + compatible = "snps,dwmac-3.70a", "snps,dwmac"; + reg = <0x00230000 0x8000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + phy-mode = "sgmii"; + clocks = <&clock CLK_GMAC0>; + clock-names = "stmmaceth"; + }; - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - }; + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + }; - rtc@130000 { - compatible = "samsung,s3c6410-rtc"; - reg = <0x130000 0x1000>; - interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_B_125>; - clock-names = "rtc"; - }; + rtc@130000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x130000 0x1000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_B_125>; + clock-names = "rtc"; + }; - tmuctrl_0: tmuctrl@160118 { - compatible = "samsung,exynos5440-tmu"; - reg = <0x160118 0x230>, <0x160368 0x10>; - interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_B_125>; - clock-names = "tmu_apbif"; - #include "exynos5440-tmu-sensor-conf.dtsi" - }; + tmuctrl_0: tmuctrl@160118 { + compatible = "samsung,exynos5440-tmu"; + reg = <0x160118 0x230>, <0x160368 0x10>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_B_125>; + clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" + }; - tmuctrl_1: tmuctrl@16011c { - compatible = "samsung,exynos5440-tmu"; - reg = <0x16011C 0x230>, <0x160368 0x10>; - interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_B_125>; - clock-names = "tmu_apbif"; - #include "exynos5440-tmu-sensor-conf.dtsi" - }; + tmuctrl_1: tmuctrl@16011c { + compatible = "samsung,exynos5440-tmu"; + reg = <0x16011C 0x230>, <0x160368 0x10>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_B_125>; + clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" + }; + + tmuctrl_2: tmuctrl@160120 { + compatible = "samsung,exynos5440-tmu"; + reg = <0x160120 0x230>, <0x160368 0x10>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_B_125>; + clock-names = "tmu_apbif"; + #include "exynos5440-tmu-sensor-conf.dtsi" + }; - tmuctrl_2: tmuctrl@160120 { - compatible = "samsung,exynos5440-tmu"; - reg = <0x160120 0x230>, <0x160368 0x10>; - interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_B_125>; - clock-names = "tmu_apbif"; - #include "exynos5440-tmu-sensor-conf.dtsi" + sata@210000 { + compatible = "snps,exynos5440-ahci"; + reg = <0x210000 0x10000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_SATA>; + clock-names = "sata"; + }; + + ohci@220000 { + compatible = "samsung,exynos5440-ohci"; + reg = <0x220000 0x1000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_USB>; + clock-names = "usbhost"; + }; + + ehci@221000 { + compatible = "samsung,exynos5440-ehci"; + reg = <0x221000 0x1000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_USB>; + clock-names = "usbhost"; + }; + + pcie_phy0: pcie-phy@270000 { + #phy-cells = <0>; + compatible = "samsung,exynos5440-pcie-phy"; + reg = <0x270000 0x1000>, <0x271000 0x40>; + }; + + pcie_phy1: pcie-phy@272000 { + #phy-cells = <0>; + compatible = "samsung,exynos5440-pcie-phy"; + reg = <0x272000 0x1000>, <0x271040 0x40>; + }; + + pcie_0: pcie@290000 { + compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; + reg = <0x290000 0x1000>, <0x40000000 0x1000>; + reg-names = "elbi", "config"; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>; + clock-names = "pcie", "pcie_bus"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + phys = <&pcie_phy0>; + ranges = <0x81000000 0 0 0x40001000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */ + bus-range = <0x00 0xff>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0x0 0 &gic 53>; + num-lanes = <4>; + status = "disabled"; + }; + + pcie_1: pcie@2a0000 { + compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; + reg = <0x2a0000 0x1000>, <0x60000000 0x1000>; + reg-names = "elbi", "config"; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>; + clock-names = "pcie", "pcie_bus"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + phys = <&pcie_phy1>; + ranges = <0x81000000 0 0 0x60001000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */ + bus-range = <0x00 0xff>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0x0 0 &gic 56>; + num-lanes = <4>; + status = "disabled"; + }; }; thermal-zones { @@ -262,86 +352,4 @@ #include "exynos5440-trip-points.dtsi" }; }; - - sata@210000 { - compatible = "snps,exynos5440-ahci"; - reg = <0x210000 0x10000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_SATA>; - clock-names = "sata"; - }; - - ohci@220000 { - compatible = "samsung,exynos5440-ohci"; - reg = <0x220000 0x1000>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_USB>; - clock-names = "usbhost"; - }; - - ehci@221000 { - compatible = "samsung,exynos5440-ehci"; - reg = <0x221000 0x1000>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_USB>; - clock-names = "usbhost"; - }; - - pcie_phy0: pcie-phy@270000 { - #phy-cells = <0>; - compatible = "samsung,exynos5440-pcie-phy"; - reg = <0x270000 0x1000>, <0x271000 0x40>; - }; - - pcie_phy1: pcie-phy@272000 { - #phy-cells = <0>; - compatible = "samsung,exynos5440-pcie-phy"; - reg = <0x272000 0x1000>, <0x271040 0x40>; - }; - - pcie_0: pcie@290000 { - compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; - reg = <0x290000 0x1000>, <0x40000000 0x1000>; - reg-names = "elbi", "config"; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>; - clock-names = "pcie", "pcie_bus"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - phys = <&pcie_phy0>; - ranges = <0x81000000 0 0 0x40001000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */ - bus-range = <0x00 0xff>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0x0 0 &gic 53>; - num-lanes = <4>; - status = "disabled"; - }; - - pcie_1: pcie@2a0000 { - compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; - reg = <0x2a0000 0x1000>, <0x60000000 0x1000>; - reg-names = "elbi", "config"; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>; - clock-names = "pcie", "pcie_bus"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - phys = <&pcie_phy1>; - ranges = <0x81000000 0 0 0x60001000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */ - bus-range = <0x00 0xff>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0x0 0 &gic 56>; - num-lanes = <4>; - status = "disabled"; - }; }; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 0029ec27819ca..2f8df9244f72f 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Google Peach Pi Rev 10+ board device tree source * * Copyright (c) 2014 Google, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; @@ -14,6 +11,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/maxim,max77802.h> #include <dt-bindings/regulator/maxim,max77802.h> +#include <dt-bindings/sound/samsung-i2s.h> #include "exynos5800.dtsi" #include "exynos5420-cpus.dtsi" @@ -89,6 +87,14 @@ samsung,model = "Peach-Pi-I2S-MAX98091"; samsung,i2s-controller = <&i2s0>; samsung,audio-codec = <&max98091>; + + cpu { + sound-dai = <&i2s0 0>; + }; + + codec { + sound-dai = <&max98091>, <&hdmi>; + }; }; usb300_vbus_reg: regulator-usb300 { @@ -145,6 +151,11 @@ vdd-supply = <&ldo9_reg>; }; +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-parents = <&clock CLK_FOUT_EPLL>; +}; + &cpu0 { cpu-supply = <&buck2_reg>; }; @@ -609,6 +620,7 @@ pinctrl-0 = <&max98091_irq>; clocks = <&pmu_system_controller 0>; clock-names = "mclk"; + #sound-dai-cells = <0>; }; light-sensor@44 { @@ -661,6 +673,8 @@ }; &i2s0 { + assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; + assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi index 9ddb6bacac5ac..57d3b319fd653 100644 --- a/arch/arm/boot/dts/exynos5800.dtsi +++ b/arch/arm/boot/dts/exynos5800.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SAMSUNG EXYNOS5800 SoC device tree source * @@ -7,10 +8,6 @@ * SAMSUNG EXYNOS5800 SoC device nodes are listed in this file. * EXYNOS5800 based board files can include this file and provide * values for board specfic bindings. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include "exynos5420.dtsi" diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts index da8bb9d60f99e..403364a7aab98 100644 --- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts +++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts @@ -78,8 +78,6 @@ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>, <&gpio0 12 GPIO_ACTIVE_HIGH>; gpio-fan,speed-map = <0 0>, <3000 1>, <6000 2>; - cooling-min-level = <0>; - cooling-max-level = <2>; #cooling-cells = <2>; }; diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts index 5ea28ee07cf45..6354e4c87313d 100644 --- a/arch/arm/boot/dts/imx1-ads.dts +++ b/arch/arm/boot/dts/imx1-ads.dts @@ -20,7 +20,7 @@ stdout-path = &uart1; }; - memory { + memory@8000000 { reg = <0x08000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/imx1-apf9328.dts b/arch/arm/boot/dts/imx1-apf9328.dts index e8b4b52c2418f..11515c0cb195c 100644 --- a/arch/arm/boot/dts/imx1-apf9328.dts +++ b/arch/arm/boot/dts/imx1-apf9328.dts @@ -20,7 +20,7 @@ stdout-path = &uart1; }; - memory { + memory@8000000 { reg = <0x08000000 0x00800000>; }; }; diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi index 20f6565c337d7..f7b9edf93f5ef 100644 --- a/arch/arm/boot/dts/imx1.dtsi +++ b/arch/arm/boot/dts/imx1.dtsi @@ -25,7 +25,7 @@ * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; reg = <0 0>; }; + memory { device_type = "memory"; }; aliases { gpio0 = &gpio1; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 57e29977ba06c..9d92ece825606 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -16,7 +16,7 @@ model = "Freescale i.MX23 Evaluation Kit"; compatible = "fsl,imx23-evk", "fsl,imx23"; - memory { + memory@40000000 { reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index a8b1c53ebe460..e9351774c6199 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -19,7 +19,7 @@ model = "i.MX23 Olinuxino Low Cost Board"; compatible = "olimex,imx23-olinuxino", "fsl,imx23"; - memory { + memory@40000000 { reg = <0x40000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts index 221fd55e967ef..67de7863ad795 100644 --- a/arch/arm/boot/dts/imx23-sansa.dts +++ b/arch/arm/boot/dts/imx23-sansa.dts @@ -49,7 +49,7 @@ model = "SanDisk Sansa Fuze+"; compatible = "sandisk,sansa_fuze_plus", "fsl,imx23"; - memory { + memory@40000000 { reg = <0x40000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts index 455169e99d49b..95c7b918f6d60 100644 --- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts +++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts @@ -16,7 +16,7 @@ model = "Freescale STMP378x Development Board"; compatible = "fsl,stmp378x-devb", "fsl,imx23"; - memory { + memory@40000000 { reg = <0x40000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/imx23-xfi3.dts b/arch/arm/boot/dts/imx23-xfi3.dts index 025cf949662dc..9616e500b9961 100644 --- a/arch/arm/boot/dts/imx23-xfi3.dts +++ b/arch/arm/boot/dts/imx23-xfi3.dts @@ -48,7 +48,7 @@ model = "Creative ZEN X-Fi3"; compatible = "creative,x-fi3", "fsl,imx23"; - memory { + memory@40000000 { reg = <0x40000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 10d57f9cbb421..cb0a3fe327187 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -23,7 +23,7 @@ * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; reg = <0 0>; }; + memory { device_type = "memory"; }; aliases { gpio0 = &gpio0; @@ -222,7 +222,8 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; - gpmi_pins_fixup: gpmi-pins-fixup { + gpmi_pins_fixup: gpmi-pins-fixup@0 { + reg = <0>; fsl,pinmux-ids = < MX23_PAD_GPMI_WPN__GPMI_WPN MX23_PAD_GPMI_WRN__GPMI_WRN @@ -266,7 +267,8 @@ fsl,pull-up = <MXS_PULL_ENABLE>; }; - mmc0_pins_fixup: mmc0-pins-fixup { + mmc0_pins_fixup: mmc0-pins-fixup@0 { + reg = <0>; fsl,pinmux-ids = < MX23_PAD_SSP1_DETECT__SSP1_DETECT MX23_PAD_SSP1_SCK__SSP1_SCK diff --git a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi index d6f27641c0ef2..e316fe08837a3 100644 --- a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi +++ b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi @@ -17,7 +17,7 @@ model = "Eukrea CPUIMX25"; compatible = "eukrea,cpuimx25", "fsl,imx25"; - memory { + memory@80000000 { reg = <0x80000000 0x4000000>; /* 64M */ }; }; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts index 0f053721d80f2..6273a1f243ed6 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts @@ -88,12 +88,12 @@ pinctrl_esdhc1: esdhc1grp { fsl,pins = < - MX25_PAD_SD1_CMD__SD1_CMD 0x400000c0 - MX25_PAD_SD1_CLK__SD1_CLK 0x400000c0 - MX25_PAD_SD1_DATA0__SD1_DATA0 0x400000c0 - MX25_PAD_SD1_DATA1__SD1_DATA1 0x400000c0 - MX25_PAD_SD1_DATA2__SD1_DATA2 0x400000c0 - MX25_PAD_SD1_DATA3__SD1_DATA3 0x400000c0 + MX25_PAD_SD1_CMD__ESDHC1_CMD 0x400000c0 + MX25_PAD_SD1_CLK__ESDHC1_CLK 0x400000c0 + MX25_PAD_SD1_DATA0__ESDHC1_DAT0 0x400000c0 + MX25_PAD_SD1_DATA1__ESDHC1_DAT1 0x400000c0 + MX25_PAD_SD1_DATA2__ESDHC1_DAT2 0x400000c0 + MX25_PAD_SD1_DATA3__ESDHC1_DAT3 0x400000c0 >; }; diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts index 30a62d4be8d90..5cb6967866c0a 100644 --- a/arch/arm/boot/dts/imx25-karo-tx25.dts +++ b/arch/arm/boot/dts/imx25-karo-tx25.dts @@ -36,7 +36,7 @@ }; }; - memory { + memory@80000000 { reg = <0x80000000 0x02000000 0x90000000 0x02000000>; }; }; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index 2d15ce72d006a..7f9bd052b84ef 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -18,7 +18,7 @@ model = "Freescale i.MX25 Product Development Kit"; compatible = "fsl,imx25-pdk", "fsl,imx25"; - memory { + memory@80000000 { reg = <0x80000000 0x4000000>; }; @@ -165,12 +165,12 @@ pinctrl_esdhc1: esdhc1grp { fsl,pins = < - MX25_PAD_SD1_CMD__SD1_CMD 0x80000000 - MX25_PAD_SD1_CLK__SD1_CLK 0x80000000 - MX25_PAD_SD1_DATA0__SD1_DATA0 0x80000000 - MX25_PAD_SD1_DATA1__SD1_DATA1 0x80000000 - MX25_PAD_SD1_DATA2__SD1_DATA2 0x80000000 - MX25_PAD_SD1_DATA3__SD1_DATA3 0x80000000 + MX25_PAD_SD1_CMD__ESDHC1_CMD 0x80000000 + MX25_PAD_SD1_CLK__ESDHC1_CLK 0x80000000 + MX25_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000 + MX25_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000 + MX25_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000 + MX25_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000 MX25_PAD_A14__GPIO_2_0 0x80000000 MX25_PAD_A15__GPIO_2_1 0x80000000 >; diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h index 6c63dca1b9b8f..a4807062a90f0 100644 --- a/arch/arm/boot/dts/imx25-pinfunc.h +++ b/arch/arm/boot/dts/imx25-pinfunc.h @@ -151,21 +151,21 @@ #define MX25_PAD_D15__D15 0x088 0x280 0x000 0x00 0x000 #define MX25_PAD_D15__LD16 0x088 0x280 0x000 0x01 0x000 #define MX25_PAD_D15__GPIO_4_5 0x088 0x280 0x000 0x05 0x000 -#define MX25_PAD_D15__SDHC1_DAT7 0x088 0x280 0x4d8 0x06 0x000 +#define MX25_PAD_D15__ESDHC1_DAT7 0x088 0x280 0x4d8 0x06 0x000 #define MX25_PAD_D14__D14 0x08c 0x284 0x000 0x00 0x000 #define MX25_PAD_D14__LD17 0x08c 0x284 0x000 0x01 0x000 #define MX25_PAD_D14__GPIO_4_6 0x08c 0x284 0x000 0x05 0x000 -#define MX25_PAD_D14__SDHC1_DAT6 0x08c 0x284 0x4d4 0x06 0x000 +#define MX25_PAD_D14__ESDHC1_DAT6 0x08c 0x284 0x4d4 0x06 0x000 #define MX25_PAD_D13__D13 0x090 0x288 0x000 0x00 0x000 #define MX25_PAD_D13__LD18 0x090 0x288 0x000 0x01 0x000 #define MX25_PAD_D13__GPIO_4_7 0x090 0x288 0x000 0x05 0x000 -#define MX25_PAD_D13__SDHC1_DAT5 0x090 0x288 0x4d0 0x06 0x000 +#define MX25_PAD_D13__ESDHC1_DAT5 0x090 0x288 0x4d0 0x06 0x000 #define MX25_PAD_D12__D12 0x094 0x28c 0x000 0x00 0x000 #define MX25_PAD_D12__GPIO_4_8 0x094 0x28c 0x000 0x05 0x000 -#define MX25_PAD_D12__SDHC1_DAT4 0x094 0x28c 0x4cc 0x06 0x000 +#define MX25_PAD_D12__ESDHC1_DAT4 0x094 0x28c 0x4cc 0x06 0x000 #define MX25_PAD_D11__D11 0x098 0x290 0x000 0x00 0x000 #define MX25_PAD_D11__GPIO_4_9 0x098 0x290 0x000 0x05 0x000 @@ -236,12 +236,13 @@ #define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x00 0x000 #define MX25_PAD_LD8__UART4_RXD 0x0e8 0x2e0 0x570 0x02 0x000 #define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x05 0x000 -#define MX25_PAD_LD8__SDHC2_CMD 0x0e8 0x2e0 0x4e0 0x06 0x000 +/* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */ +#define MX25_PAD_LD8__ESDHC2_CMD 0x0e8 0x2e0 0x4e0 0x16 0x000 #define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x00 0x000 #define MX25_PAD_LD9__UART4_TXD 0x0ec 0x2e4 0x000 0x02 0x000 #define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x05 0x001 -#define MX25_PAD_LD9__SDHC2_CLK 0x0ec 0x2e4 0x4dc 0x06 0x000 +#define MX25_PAD_LD9__ESDHC2_CLK 0x0ec 0x2e4 0x4dc 0x06 0x000 #define MX25_PAD_LD10__LD10 0x0f0 0x2e8 0x000 0x00 0x000 #define MX25_PAD_LD10__UART4_RTS 0x0f0 0x2e8 0x56c 0x02 0x000 @@ -250,7 +251,7 @@ #define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x00 0x000 #define MX25_PAD_LD11__UART4_CTS 0x0f4 0x2ec 0x000 0x02 0x000 #define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x05 0x001 -#define MX25_PAD_LD11__SDHC2_DAT1 0x0f4 0x2ec 0x4e8 0x06 0x000 +#define MX25_PAD_LD11__ESDHC2_DAT1 0x0f4 0x2ec 0x4e8 0x06 0x000 #define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x00 0x000 #define MX25_PAD_LD12__CSPI2_MOSI 0x0f8 0x2f0 0x4a0 0x02 0x000 @@ -316,12 +317,13 @@ #define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x07 0x000 #define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x00 0x000 -#define MX25_PAD_CSI_D6__SDHC2_CMD 0x130 0x328 0x4e0 0x02 0x001 +/* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */ +#define MX25_PAD_CSI_D6__ESDHC2_CMD 0x130 0x328 0x4e0 0x12 0x001 #define MX25_PAD_CSI_D6__SIM1_PD0 0x130 0x328 0x000 0x04 0x000 #define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x05 0x000 #define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x00 0x000 -#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK 0x134 0x32C 0x4dc 0x02 0x001 +#define MX25_PAD_CSI_D7__ESDHC2_CLK 0x134 0x32C 0x4dc 0x02 0x001 #define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x05 0x000 #define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x00 0x000 @@ -336,22 +338,22 @@ #define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x00 0x000 #define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x01 0x000 -#define MX25_PAD_CSI_MCLK__SDHC2_DAT0 0x140 0x338 0x4e4 0x02 0x001 +#define MX25_PAD_CSI_MCLK__ESDHC2_DAT0 0x140 0x338 0x4e4 0x02 0x001 #define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x05 0x000 #define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x00 0x000 #define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x01 0x000 -#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1 0x144 0x33c 0x4e8 0x02 0x001 +#define MX25_PAD_CSI_VSYNC__ESDHC2_DAT1 0x144 0x33c 0x4e8 0x02 0x001 #define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x05 0x000 #define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x00 0x000 #define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x01 0x000 -#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2 0x148 0x340 0x4ec 0x02 0x001 +#define MX25_PAD_CSI_HSYNC__ESDHC2_DAT2 0x148 0x340 0x4ec 0x02 0x001 #define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x05 0x000 #define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x00 0x000 #define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x01 0x000 -#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3 0x14c 0x344 0x4f0 0x02 0x001 +#define MX25_PAD_CSI_PIXCLK__ESDHC2_DAT3 0x14c 0x344 0x4f0 0x02 0x001 #define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x05 0x000 #define MX25_PAD_I2C1_CLK__I2C1_CLK 0x150 0x348 0x000 0x00 0x000 @@ -419,37 +421,37 @@ #define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x05 0x000 /* - * Removing the SION bit from MX25_PAD_SD1_CMD__SD1_CMD breaks detecting an SD + * Removing the SION bit from MX25_PAD_*__ESDHCn_CMD breaks detecting an SD * card. According to the i.MX25 reference manual (e.g. Figure 23-2 in IMX25RM * Rev. 2 from 01/2011) this pin is bidirectional. So it seems to be a silicon - * bug that configuring the SD1_CMD function doesn't enable the input path for - * this pin. + * bug that configuring the ESDHCn_CMD function doesn't enable the input path + * for this pin. * This might have side effects for other hardware units that are connected to * that pin and use the respective function as input. */ -#define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000 +#define MX25_PAD_SD1_CMD__ESDHC1_CMD 0x190 0x388 0x000 0x10 0x000 #define MX25_PAD_SD1_CMD__CSPI2_MOSI 0x190 0x388 0x4a0 0x01 0x001 #define MX25_PAD_SD1_CMD__FEC_RDATA2 0x190 0x388 0x50c 0x02 0x002 #define MX25_PAD_SD1_CMD__GPIO_2_23 0x190 0x388 0x000 0x05 0x000 -#define MX25_PAD_SD1_CLK__SD1_CLK 0x194 0x38c 0x000 0x00 0x000 +#define MX25_PAD_SD1_CLK__ESDHC1_CLK 0x194 0x38c 0x000 0x00 0x000 #define MX25_PAD_SD1_CLK__CSPI2_MISO 0x194 0x38c 0x49c 0x01 0x001 #define MX25_PAD_SD1_CLK__FEC_RDATA3 0x194 0x38c 0x510 0x02 0x002 #define MX25_PAD_SD1_CLK__GPIO_2_24 0x194 0x38c 0x000 0x05 0x000 -#define MX25_PAD_SD1_DATA0__SD1_DATA0 0x198 0x390 0x000 0x00 0x000 +#define MX25_PAD_SD1_DATA0__ESDHC1_DAT0 0x198 0x390 0x000 0x00 0x000 #define MX25_PAD_SD1_DATA0__CSPI2_SCLK 0x198 0x390 0x494 0x01 0x001 #define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x05 0x000 -#define MX25_PAD_SD1_DATA1__SD1_DATA1 0x19c 0x394 0x000 0x00 0x000 +#define MX25_PAD_SD1_DATA1__ESDHC1_DAT1 0x19c 0x394 0x000 0x00 0x000 #define MX25_PAD_SD1_DATA1__AUD7_RXD 0x19c 0x394 0x478 0x03 0x000 #define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x05 0x000 -#define MX25_PAD_SD1_DATA2__SD1_DATA2 0x1a0 0x398 0x000 0x00 0x000 +#define MX25_PAD_SD1_DATA2__ESDHC1_DAT2 0x1a0 0x398 0x000 0x00 0x000 #define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x02 0x002 #define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x05 0x000 -#define MX25_PAD_SD1_DATA3__SD1_DATA3 0x1a4 0x39c 0x000 0x00 0x000 +#define MX25_PAD_SD1_DATA3__ESDHC1_DAT3 0x1a4 0x39c 0x000 0x00 0x000 #define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x02 0x002 #define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x05 0x000 @@ -496,6 +498,8 @@ #define MX25_PAD_KPP_COL3__GPIO_3_4 0x1c4 0x3bc 0x000 0x05 0x000 #define MX25_PAD_FEC_MDC__FEC_MDC 0x1c8 0x3c0 0x000 0x00 0x000 +/* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */ +#define MX25_PAD_FEC_MDC__ESDHC2_CMD 0x1c8 0x3c0 0x4e0 0x11 0x002 #define MX25_PAD_FEC_MDC__AUD4_TXD 0x1c8 0x3c0 0x464 0x02 0x001 #define MX25_PAD_FEC_MDC__GPIO_3_5 0x1c8 0x3c0 0x000 0x05 0x000 @@ -601,4 +605,28 @@ #define MX25_PAD_BOOT_MODE1__BOOT_MODE1 0x228 0x000 0x000 0x00 0x000 #define MX25_PAD_BOOT_MODE1__GPIO_4_31 0x228 0x000 0x000 0x05 0x000 +/* + * Compatibility defines for out-of-tree users. You should update if you make + * use of one of them. + */ +#define MX25_PAD_D15__SDHC1_DAT7 MX25_PAD_D15__ESDHC1_DAT7 +#define MX25_PAD_D14__SDHC1_DAT6 MX25_PAD_D14__ESDHC1_DAT6 +#define MX25_PAD_D13__SDHC1_DAT5 MX25_PAD_D13__ESDHC1_DAT5 +#define MX25_PAD_D12__SDHC1_DAT4 MX25_PAD_D12__ESDHC1_DAT4 +#define MX25_PAD_LD8__SDHC2_CMD MX25_PAD_LD8__ESDHC2_CMD +#define MX25_PAD_LD9__SDHC2_CLK MX25_PAD_LD9__ESDHC2_CLK +#define MX25_PAD_LD11__SDHC2_DAT1 MX25_PAD_LD11__ESDHC2_DAT1 +#define MX25_PAD_CSI_D6__SDHC2_CMD MX25_PAD_CSI_D6__ESDHC2_CMD +#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK MX25_PAD_CSI_D7__ESDHC2_CLK +#define MX25_PAD_CSI_MCLK__SDHC2_DAT0 MX25_PAD_CSI_MCLK__ESDHC2_DAT0 +#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1 MX25_PAD_CSI_VSYNC__ESDHC2_DAT1 +#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2 MX25_PAD_CSI_HSYNC__ESDHC2_DAT2 +#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3 MX25_PAD_CSI_PIXCLK__ESDHC2_DAT3 +#define MX25_PAD_SD1_CMD__SD1_CMD MX25_PAD_SD1_CMD__ESDHC1_CMD +#define MX25_PAD_SD1_CLK__SD1_CLK MX25_PAD_SD1_CLK__ESDHC1_CLK +#define MX25_PAD_SD1_DATA0__SD1_DATA0 MX25_PAD_SD1_DATA0__ESDHC1_DAT0 +#define MX25_PAD_SD1_DATA1__SD1_DATA1 MX25_PAD_SD1_DATA1__ESDHC1_DAT1 +#define MX25_PAD_SD1_DATA2__SD1_DATA2 MX25_PAD_SD1_DATA2__ESDHC1_DAT2 +#define MX25_PAD_SD1_DATA3__SD1_DATA3 MX25_PAD_SD1_DATA3__ESDHC1_DAT3 + #endif /* __DTS_IMX25_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 9445f8e1473cc..cf70df20b19ce 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -22,7 +22,7 @@ * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; reg = <0 0>; }; + memory { device_type = "memory"; }; aliases { ethernet0 = &fec; @@ -269,6 +269,7 @@ dmas = <&sdma 24 1 0>, <&sdma 25 1 0>; dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; status = "disabled"; }; @@ -329,6 +330,7 @@ dmas = <&sdma 28 1 0>, <&sdma 29 1 0>; dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts index 73aae4f5e539d..66941cdbf2444 100644 --- a/arch/arm/boot/dts/imx27-apf27.dts +++ b/arch/arm/boot/dts/imx27-apf27.dts @@ -19,7 +19,7 @@ model = "Armadeus Systems APF27 module"; compatible = "armadeus,imx27-apf27", "fsl,imx27"; - memory { + memory@a0000000 { reg = <0xa0000000 0x04000000>; }; diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi index 2cf896c505f9f..9c455dcbe6ebf 100644 --- a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi +++ b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi @@ -16,21 +16,14 @@ model = "Eukrea CPUIMX27"; compatible = "eukrea,cpuimx27", "fsl,imx27"; - memory { + memory@a0000000 { reg = <0xa0000000 0x04000000>; }; - clocks { - #address-cells = <1>; - #size-cells = <0>; - compatible = "simple-bus"; - - clk14745600: clock@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <14745600>; - reg = <0>; - }; + clk14745600: clk-uart { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <14745600>; }; }; diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts index f56535768ee87..15145e7f9778a 100644 --- a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts +++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts @@ -84,7 +84,7 @@ cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; status = "okay"; - ads7846 { + ads7846@0 { compatible = "ti,ads7846"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_touch>; diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts index 2a140c8ae6d27..924b90c9985d5 100644 --- a/arch/arm/boot/dts/imx27-pdk.dts +++ b/arch/arm/boot/dts/imx27-pdk.dts @@ -16,7 +16,7 @@ model = "Freescale i.MX27 Product Development Kit"; compatible = "fsl,imx27-pdk", "fsl,imx27"; - memory { + memory@a0000000 { reg = <0xa0000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi index 0b8490b21a383..cbad7c88c58cc 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi @@ -17,7 +17,7 @@ model = "Phytec pca100"; compatible = "phytec,imx27-pca100", "fsl,imx27"; - memory { + memory@a0000000 { reg = <0xa0000000 0x08000000>; /* 128MB */ }; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index c9095b7654c60..ec466b4bfd410 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -16,7 +16,7 @@ model = "Phytec pcm038"; compatible = "phytec,imx27-pcm038", "fsl,imx27"; - memory { + memory@a0000000 { reg = <0xa0000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 15d85f1f85fd5..6585b00c3917a 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -26,7 +26,7 @@ * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; reg = <0 0>; }; + memory { device_type = "memory"; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts index 070e59cbdd8b7..bab78346fa9f4 100644 --- a/arch/arm/boot/dts/imx28-apf28.dts +++ b/arch/arm/boot/dts/imx28-apf28.dts @@ -16,7 +16,7 @@ model = "Armadeus Systems APF28 module"; compatible = "armadeus,imx28-apf28", "fsl,imx28"; - memory { + memory@40000000 { reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index ae078341fb603..96faa53ba44c6 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -6,7 +6,7 @@ model = "Bluegiga APX4 Development Kit"; compatible = "bluegiga,apx4devkit", "fsl,imx28"; - memory { + memory@40000000 { reg = <0x40000000 0x04000000>; }; @@ -82,7 +82,8 @@ fsl,pull-up = <MXS_PULL_ENABLE>; }; - mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 { + mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 { + reg = <0>; fsl,pinmux-ids = < MX28_PAD_SSP0_DATA7__SSP2_SCK >; @@ -146,6 +147,7 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; clocks = <&saif0>; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index 570aa339a05ec..e54f5aba70914 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -16,7 +16,7 @@ model = "Crystalfontz CFA-10036 Board"; compatible = "crystalfontz,cfa10036", "fsl,imx28"; - memory { + memory@40000000 { reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 4cd52d53cf004..60e5c7fd50351 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -19,6 +19,71 @@ model = "Crystalfontz CFA-10049 Board"; compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28"; + i2cmux { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2cmux_pins_cfa10049>; + mux-gpios = <&gpio1 22 0 &gpio1 23 0>; + i2c-parent = <&i2c1>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + adc0: nau7802@2a { + compatible = "nuvoton,nau7802"; + reg = <0x2a>; + nuvoton,vldo = <3000>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + adc1: nau7802@2a { + compatible = "nuvoton,nau7802"; + reg = <0x2a>; + nuvoton,vldo = <3000>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + adc2: nau7802@2a { + compatible = "nuvoton,nau7802"; + reg = <0x2a>; + nuvoton,vldo = <3000>; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + pca9555: pca9555@20 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + pinctrl-0 = <&pca_pins_cfa10049>; + interrupt-parent = <&gpio2>; + interrupts = <19 0x2>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x20>; + }; + }; + }; + apb@80000000 { apbh@80000000 { pinctrl@80018000 { @@ -219,71 +284,6 @@ status = "okay"; }; - i2cmux { - compatible = "i2c-mux-gpio"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2cmux_pins_cfa10049>; - mux-gpios = <&gpio1 22 0 &gpio1 23 0>; - i2c-parent = <&i2c1>; - - i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - adc0: nau7802@2a { - compatible = "nuvoton,nau7802"; - reg = <0x2a>; - nuvoton,vldo = <3000>; - }; - }; - - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - adc1: nau7802@2a { - compatible = "nuvoton,nau7802"; - reg = <0x2a>; - nuvoton,vldo = <3000>; - }; - }; - - i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - - adc2: nau7802@2a { - compatible = "nuvoton,nau7802"; - reg = <0x2a>; - nuvoton,vldo = <3000>; - }; - }; - - i2c@3 { - reg = <3>; - #address-cells = <1>; - #size-cells = <0>; - - pca9555: pca9555@20 { - compatible = "nxp,pca9555"; - pinctrl-names = "default"; - pinctrl-0 = <&pca_pins_cfa10049>; - interrupt-parent = <&gpio2>; - interrupts = <19 0x2>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x20>; - }; - }; - }; - usbphy1: usbphy@8007e000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts index bd3fd470f9c31..97084e463d7cd 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-485.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-485.dts @@ -19,7 +19,7 @@ model = "I2SE Duckbill 2 485"; compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28"; - memory { + memory@40000000 { reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts index 4450047885ebb..7f8d40a9c67eb 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts @@ -20,7 +20,7 @@ model = "I2SE Duckbill 2 EnOcean"; compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28"; - memory { + memory@40000000 { reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts index 927732efca981..13e7b134da9ea 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts @@ -23,7 +23,7 @@ ethernet1 = &qca7000; }; - memory { + memory@40000000 { reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts index 7fa3d759505c6..88556c93b00f9 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2.dts @@ -19,7 +19,7 @@ model = "I2SE Duckbill 2"; compatible = "i2se,duckbill-2", "fsl,imx28"; - memory { + memory@40000000 { reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts index 3e4385d4ed78d..f286bfe699bee 100644 --- a/arch/arm/boot/dts/imx28-duckbill.dts +++ b/arch/arm/boot/dts/imx28-duckbill.dts @@ -18,7 +18,7 @@ model = "I2SE Duckbill"; compatible = "i2se,duckbill", "fsl,imx28"; - memory { + memory@40000000 { reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts index 7c1572c5a4fb6..b70f3349c350a 100644 --- a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts @@ -23,7 +23,7 @@ model = "Eukrea Electromatique MBMX283LC"; compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28"; - memory { + memory@40000000 { reg = <0x40000000 0x04000000>; }; }; diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts index b61fd61eb1c70..65efb78ac0409 100644 --- a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts @@ -22,7 +22,7 @@ model = "Eukrea Electromatique MBMX287LC"; compatible = "eukrea,mbmx287lc", "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28"; - memory { + memory@40000000 { reg = <0x40000000 0x08000000>; }; }; diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi index 49ab40838e694..ff1328ce7d37f 100644 --- a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi @@ -151,6 +151,7 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; clocks = <&saif0>; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 7f5b80402c545..b0d39654aeb32 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -16,7 +16,7 @@ model = "Freescale i.MX28 Evaluation Kit"; compatible = "fsl,imx28-evk", "fsl,imx28"; - memory { + memory@40000000 { reg = <0x40000000 0x08000000>; }; @@ -197,6 +197,7 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; clocks = <&saif0>; diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi index a69856e41ba4c..0ec415e1ff58b 100644 --- a/arch/arm/boot/dts/imx28-m28.dtsi +++ b/arch/arm/boot/dts/imx28-m28.dtsi @@ -15,7 +15,7 @@ model = "Aries/DENX M28"; compatible = "aries,m28", "denx,m28", "fsl,imx28"; - memory { + memory@40000000 { reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts index 9d6c8fe28d746..3bb5ffc644d6f 100644 --- a/arch/arm/boot/dts/imx28-m28cu3.dts +++ b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -16,7 +16,7 @@ model = "MSR M28CU3"; compatible = "msr,m28cu3", "fsl,imx28"; - memory { + memory@40000000 { reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 22aa025cab1ec..7d97a0ce74a38 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -140,6 +140,7 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; clocks = <&saif0>; diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts index 0ce3cb8e7914e..2393e83979e0d 100644 --- a/arch/arm/boot/dts/imx28-sps1.dts +++ b/arch/arm/boot/dts/imx28-sps1.dts @@ -16,7 +16,7 @@ model = "SchulerControl GmbH, SC SPS 1"; compatible = "schulercontrol,imx28-sps1", "fsl,imx28"; - memory { + memory@40000000 { reg = <0x40000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts index 1e391c9f1b7a4..f8a09a8c2c36a 100644 --- a/arch/arm/boot/dts/imx28-ts4600.dts +++ b/arch/arm/boot/dts/imx28-ts4600.dts @@ -19,7 +19,7 @@ model = "Technologic Systems i.MX28 TS-4600"; compatible = "technologic,imx28-ts4600", "fsl,imx28"; - memory { + memory@40000000 { reg = <0x40000000 0x10000000>; /* 256MB */ }; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index 152621ea37db8..687186358c18f 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -65,8 +65,8 @@ usbotg = &usb0; }; - memory { - reg = <0 0>; /* will be filled in by U-Boot */ + memory@40000000 { + reg = <0x40000000 0>; /* will be filled in by U-Boot */ }; onewire { @@ -531,7 +531,8 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; - tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins { + tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins@0 { + reg = <0>; fsl,pinmux-ids = < MX28_PAD_SSP0_DATA6__GPIO_2_6 /* RESET */ MX28_PAD_SSP0_DATA5__GPIO_2_5 /* IRQ */ @@ -542,7 +543,8 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; - tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins { + tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins@0 { + reg = <0>; fsl,pinmux-ids = < MX28_PAD_LCD_D00__GPIO_1_0 >; @@ -551,7 +553,8 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; - tx28_lcdif_23bit_pins: tx28-lcdif-23bit { + tx28_lcdif_23bit_pins: tx28-lcdif-23bit@0 { + reg = <0>; fsl,pinmux-ids = < /* LCD_D00 may be used as Flexcan Transceiver Enable on STK5-V5 */ MX28_PAD_LCD_D01__LCD_D1 @@ -583,7 +586,8 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; - tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl { + tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl@0 { + reg = <0>; fsl,pinmux-ids = < MX28_PAD_LCD_ENABLE__GPIO_1_31 /* Enable */ MX28_PAD_LCD_RESET__GPIO_3_30 /* Reset */ @@ -593,7 +597,8 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; - tx28_mac0_pins_gpio: tx28-mac0-gpio-pins { + tx28_mac0_pins_gpio: tx28-mac0-gpio-pins@0 { + reg = <0>; fsl,pinmux-ids = < MX28_PAD_ENET0_MDC__GPIO_4_0 MX28_PAD_ENET0_MDIO__GPIO_4_1 @@ -610,7 +615,8 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; - tx28_pca9554_pins: tx28-pca9554-pins { + tx28_pca9554_pins: tx28-pca9554-pins@0 { + reg = <0>; fsl,pinmux-ids = < MX28_PAD_PWM3__GPIO_3_28 >; @@ -619,7 +625,8 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; - tx28_spi_gpio_pins: spi-gpiogrp { + tx28_spi_gpio_pins: spi-gpiogrp@0 { + reg = <0>; fsl,pinmux-ids = < MX28_PAD_AUART2_RX__GPIO_3_8 MX28_PAD_AUART2_TX__GPIO_3_9 @@ -633,7 +640,8 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; - tx28_tsc2007_pins: tx28-tsc2007-pins { + tx28_tsc2007_pins: tx28-tsc2007-pins@0 { + reg = <0>; fsl,pinmux-ids = < MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */ >; @@ -643,7 +651,8 @@ }; - tx28_usbphy0_pins: tx28-usbphy0-pins { + tx28_usbphy0_pins: tx28-usbphy0-pins@0 { + reg = <0>; fsl,pinmux-ids = < MX28_PAD_GPMI_CE2N__GPIO_0_18 /* USBOTG_VBUSEN */ MX28_PAD_GPMI_CE3N__GPIO_0_19 /* USBOTH_OC */ @@ -653,7 +662,8 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; - tx28_usbphy1_pins: tx28-usbphy1-pins { + tx28_usbphy1_pins: tx28-usbphy1-pins@0 { + reg = <0>; fsl,pinmux-ids = < MX28_PAD_SPDIF__GPIO_3_27 /* USBH_VBUSEN */ MX28_PAD_JTAG_RTCK__GPIO_4_20 /* USBH_OC */ diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index e52e05c0fe56b..9ad8d3556859c 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -24,7 +24,7 @@ * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; reg = <0 0>; }; + memory { device_type = "memory"; }; aliases { ethernet0 = &mac0; @@ -283,7 +283,8 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; - gpmi_status_cfg: gpmi-status-cfg { + gpmi_status_cfg: gpmi-status-cfg@0 { + reg = <0>; fsl,pinmux-ids = < MX28_PAD_GPMI_RDN__GPMI_RDN MX28_PAD_GPMI_WRN__GPMI_WRN @@ -527,14 +528,16 @@ fsl,pull-up = <MXS_PULL_ENABLE>; }; - mmc0_cd_cfg: mmc0-cd-cfg { + mmc0_cd_cfg: mmc0-cd-cfg@0 { + reg = <0>; fsl,pinmux-ids = < MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT >; fsl,pull-up = <MXS_PULL_DISABLE>; }; - mmc0_sck_cfg: mmc0-sck-cfg { + mmc0_sck_cfg: mmc0-sck-cfg@0 { + reg = <0>; fsl,pinmux-ids = < MX28_PAD_SSP0_SCK__SSP0_SCK >; @@ -558,14 +561,16 @@ fsl,pull-up = <MXS_PULL_ENABLE>; }; - mmc1_cd_cfg: mmc1-cd-cfg { + mmc1_cd_cfg: mmc1-cd-cfg@0 { + reg = <0>; fsl,pinmux-ids = < MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT >; fsl,pull-up = <MXS_PULL_DISABLE>; }; - mmc1_sck_cfg: mmc1-sck-cfg { + mmc1_sck_cfg: mmc1-sck-cfg@0 { + reg = <0>; fsl,pinmux-ids = < MX28_PAD_GPMI_WRN__SSP1_SCK >; @@ -606,7 +611,8 @@ fsl,pull-up = <MXS_PULL_ENABLE>; }; - mmc2_cd_cfg: mmc2-cd-cfg { + mmc2_cd_cfg: mmc2-cd-cfg@0 { + reg = <0>; fsl,pinmux-ids = < MX28_PAD_AUART1_RX__SSP2_CARD_DETECT >; diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts index ae6cebbed84b8..6ee4ff8e4e8f0 100644 --- a/arch/arm/boot/dts/imx31-bug.dts +++ b/arch/arm/boot/dts/imx31-bug.dts @@ -16,7 +16,7 @@ model = "Buglabs i.MX31 Bug 1.x"; compatible = "buglabs,imx31-bug", "fsl,imx31"; - memory { + memory@80000000 { reg = <0x80000000 0x8000000>; /* 128M */ }; }; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index a72031407ebdb..ebc3f2dbb6fd0 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -19,7 +19,7 @@ * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; reg = <0 0>; }; + memory { device_type = "memory"; }; aliases { serial0 = &uart1; diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi index 9c2b715ab8bfd..ba39d938f2891 100644 --- a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi +++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi @@ -17,7 +17,7 @@ model = "Eukrea CPUIMX35"; compatible = "eukrea,cpuimx35", "fsl,imx35"; - memory { + memory@80000000 { reg = <0x80000000 0x8000000>; /* 128M */ }; }; diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts index 9bb628f225029..646b1257bba26 100644 --- a/arch/arm/boot/dts/imx35-pdk.dts +++ b/arch/arm/boot/dts/imx35-pdk.dts @@ -17,7 +17,7 @@ model = "Freescale i.MX35 Product Development Kit"; compatible = "fsl,imx35-pdk", "fsl,imx35"; - memory { + memory@80000000 { reg = <0x80000000 0x8000000>, <0x90000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index e08c0c193767b..bf343195697e8 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -20,7 +20,7 @@ * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; reg = <0 0>; }; + memory { device_type = "memory"; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts index 98b5faa06e27e..23f1833e23fab 100644 --- a/arch/arm/boot/dts/imx50-evk.dts +++ b/arch/arm/boot/dts/imx50-evk.dts @@ -18,7 +18,7 @@ model = "Freescale i.MX50 Evaluation Kit"; compatible = "fsl,imx50-evk", "fsl,imx50"; - memory { + memory@70000000 { reg = <0x70000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 35955e63d6c56..7954e79d0a169 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -25,7 +25,7 @@ * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; reg = <0 0>; }; + memory { device_type = "memory"; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts index c83ac16003223..79d80036f74de 100644 --- a/arch/arm/boot/dts/imx51-apf51.dts +++ b/arch/arm/boot/dts/imx51-apf51.dts @@ -21,7 +21,7 @@ model = "Armadeus Systems APF51 module"; compatible = "armadeus,imx51-apf51", "fsl,imx51"; - memory { + memory@90000000 { reg = <0x90000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 4ac5ab614a7f8..cf7a1963df253 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -21,7 +21,7 @@ stdout-path = &uart1; }; - memory { + memory@90000000 { reg = <0x90000000 0x20000000>; }; @@ -369,6 +369,7 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; clocks = <&clk_audio>; VDDA-supply = <&vdig_reg>; VDDIO-supply = <&vvideo_reg>; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts index 1db517d3d497f..2967a748d8598 100644 --- a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts +++ b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts @@ -17,7 +17,7 @@ "digi,connectcore-ccxmx51-som", "fsl,imx51"; chosen { - linux,stdout-path = &uart1; + stdout-path = &uart1; }; }; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi index b821066a0d2aa..5761a66e8a0d3 100644 --- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi +++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi @@ -16,7 +16,7 @@ model = "Digi ConnectCore CC(W)-MX51"; compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51"; - memory { + memory@90000000 { reg = <0x90000000 0x08000000>; }; }; diff --git a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi index 63164266af830..f8902a338e49a 100644 --- a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi +++ b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi @@ -22,7 +22,7 @@ model = "Eukrea CPUIMX51"; compatible = "eukrea,cpuimx51", "fsl,imx51"; - memory { + memory@90000000 { reg = <0x90000000 0x10000000>; /* 256M */ }; }; diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts index f59b02bae68d7..39eb067904c3d 100644 --- a/arch/arm/boot/dts/imx51-ts4800.dts +++ b/arch/arm/boot/dts/imx51-ts4800.dts @@ -17,7 +17,7 @@ stdout-path = &uart1; }; - memory { + memory@90000000 { reg = <0x90000000 0x10000000>; }; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index 5306b78de0caa..0c99ac04ad08b 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -51,6 +51,11 @@ stdout-path = &uart1; }; + /* Will be filled by the bootloader */ + memory@90000000 { + reg = <0x90000000 0>; + }; + aliases { mdio-gpio0 = &mdio_gpio; rtc0 = &ds1341; @@ -568,6 +573,15 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-rdu1"; + current-speed = <38400>; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + }; + }; }; &usbh1 { diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 00d30bd700682..5d390a64e976d 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -26,7 +26,7 @@ * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; reg = <0 0>; }; + memory { device_type = "memory"; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 4486bc47d1400..80fc00705d92b 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -17,7 +17,7 @@ model = "Freescale i.MX53 Automotive Reference Design Board"; compatible = "fsl,imx53-ard", "fsl,imx53"; - memory { + memory@70000000 { reg = <0x70000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx53-cx9020.dts b/arch/arm/boot/dts/imx53-cx9020.dts index 5e67e43004e7e..cf70ebc4399a2 100644 --- a/arch/arm/boot/dts/imx53-cx9020.dts +++ b/arch/arm/boot/dts/imx53-cx9020.dts @@ -21,7 +21,7 @@ stdout-path = &uart2; }; - memory { + memory@70000000 { reg = <0x70000000 0x20000000>, <0xb0000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi index 7ce69c63510ca..3da6dd5edb79c 100644 --- a/arch/arm/boot/dts/imx53-m53.dtsi +++ b/arch/arm/boot/dts/imx53-m53.dtsi @@ -15,7 +15,7 @@ model = "Aries/DENX M53"; compatible = "aries,imx53-m53", "denx,imx53-m53", "fsl,imx53"; - memory { + memory@70000000 { reg = <0x70000000 0x20000000>, <0xb0000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index e48525763b1b9..3935fe6490ed4 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -153,6 +153,7 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; VDDA-supply = <®_3p2v>; VDDIO-supply = <®_3p2v>; clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>; diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts index cce959438a796..d5628af2e301e 100644 --- a/arch/arm/boot/dts/imx53-ppd.dts +++ b/arch/arm/boot/dts/imx53-ppd.dts @@ -132,6 +132,14 @@ enable-active-high; }; + reg_tsiref: regulator-tsiref { + compatible = "regulator-fixed"; + regulator-name = "tsiref"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + pwm_bl: backlight { compatible = "pwm-backlight"; pwms = <&pwm2 0 50000>; @@ -294,6 +302,8 @@ interrupt-parent = <&gpio3>; interrupts = <12 0x8>; spi-max-frequency = <1000000>; + dlg,tsi-as-adc; + tsiref-supply = <®_tsiref>; regulators { buck1_reg: buck1 { @@ -436,6 +446,7 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0xa>; + #sound-dai-cells = <0>; VDDA-supply = <®_sgtl5k>; VDDIO-supply = <®_sgtl5k>; clocks = <&cko2_11M>; @@ -525,6 +536,7 @@ touchscreen@4b { compatible = "atmel,maxtouch"; + reset-gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; reg = <0x4b>; interrupt-parent = <&gpio5>; interrupts = <4 0x8>; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 41a2e2a2b0792..485a69d45e1c9 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -17,7 +17,7 @@ stdout-path = &uart1; }; - memory { + memory@70000000 { reg = <0x70000000 0x20000000>, <0xb0000000 0x20000000>; }; @@ -317,6 +317,7 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; VDDA-supply = <®_3p2v>; VDDIO-supply = <®_3p2v>; clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 51f4a42a55e2d..fd030128666c7 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -17,7 +17,7 @@ model = "Freescale i.MX53 Smart Mobile Reference Design Board"; compatible = "fsl,imx53-smd", "fsl,imx53"; - memory { + memory@70000000 { reg = <0x70000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index eecdc1c55eefc..a72b8981fc3bd 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -16,7 +16,7 @@ model = "TQ TQMa53"; compatible = "tq,tqma53", "fsl,imx53"; - memory { + memory@70000000 { reg = <0x70000000 0x40000000>; /* Up to 1GiB */ }; diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts index fe15c9555d6e9..af8ec5e4417b6 100644 --- a/arch/arm/boot/dts/imx53-tx53-x03x.dts +++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts @@ -230,6 +230,7 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; VDDA-supply = <®_2v5>; VDDIO-supply = <®_3v3>; clocks = <&mclk>; diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts index f2b2ad3ce9e52..6cdf2082c742c 100644 --- a/arch/arm/boot/dts/imx53-tx53-x13x.dts +++ b/arch/arm/boot/dts/imx53-tx53-x13x.dts @@ -131,6 +131,7 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; VDDA-supply = <®_2v5>; VDDIO-supply = <®_3v3>; clocks = <&mclk>; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index a22e461fc1681..69a2af7d6c115 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -49,6 +49,11 @@ model = "Ka-Ro electronics TX53 module"; compatible = "karo,tx53", "fsl,imx53"; + /* Will be filled by the bootloader */ + memory@70000000 { + reg = <0x70000000 0>; + }; + aliases { can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */ can1 = &can1; diff --git a/arch/arm/boot/dts/imx53-usbarmory.dts b/arch/arm/boot/dts/imx53-usbarmory.dts index 6782d7fc5961c..f6268d0ded296 100644 --- a/arch/arm/boot/dts/imx53-usbarmory.dts +++ b/arch/arm/boot/dts/imx53-usbarmory.dts @@ -57,7 +57,7 @@ stdout-path = &uart1; }; - memory { + memory@70000000 { reg = <0x70000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts index 25c78f19826c8..957053755c3ca 100644 --- a/arch/arm/boot/dts/imx53-voipac-bsb.dts +++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts @@ -133,6 +133,7 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; clocks = <&clks 150>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 1040251f29513..7d647d043f528 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -26,7 +26,7 @@ * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; reg = <0 0>; }; + memory { device_type = "memory"; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx6dl-apf6dev.dts b/arch/arm/boot/dts/imx6dl-apf6dev.dts index df26e542ab3ac..4a7f86de6c39b 100644 --- a/arch/arm/boot/dts/imx6dl-apf6dev.dts +++ b/arch/arm/boot/dts/imx6dl-apf6dev.dts @@ -54,7 +54,7 @@ model = "Armadeus APF6 Solo Module on APF6Dev Board"; compatible = "armadeus,imx6dl-apf6dev", "armadeus,imx6dl-apf6", "fsl,imx6dl"; - memory { + memory@10000000 { reg = <0x10000000 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts index 5f0d196495d08..7128c76d5721d 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts @@ -48,7 +48,7 @@ model = "aristainetos2 i.MX6 Dual Lite Board 4"; compatible = "fsl,imx6dl"; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts index 805b1318b7f77..240f3661469fd 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts @@ -48,7 +48,7 @@ model = "aristainetos2 i.MX6 Dual Lite Board 7"; compatible = "fsl,imx6dl"; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts index 3c9f4af9e9ff3..ad7733662fe57 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts @@ -27,7 +27,7 @@ status = "okay"; }; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts index 96cd835ccbf64..64ed84e3c5128 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts @@ -16,7 +16,7 @@ model = "aristainetos i.MX6 Dual Lite Board 7"; compatible = "fsl,imx6dl"; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index dcf9206f3e0d4..ea184d1084911 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -53,6 +53,11 @@ compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl", "fsl,imx6dl"; + /* Will be filled by the bootloader */ + memory@10000000 { + reg = <0x10000000 0>; + }; + aliases { i2c0 = &i2c2; i2c1 = &i2c3; @@ -63,6 +68,10 @@ rtc1 = &snvs_rtc; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + clocks { /* Fixed crystal dedicated to mcp251x */ clk16m: clk@1 { diff --git a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts index 994f96a3fb54b..89384cb618f60 100644 --- a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts +++ b/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts @@ -20,4 +20,9 @@ / { model = "DFI FS700-M60-6DL i.MX6dl Q7 Board"; compatible = "dfi,fs700-m60-6dl", "dfi,fs700e-m60", "fsl,imx6dl"; + + /* Will be filled by the bootloader */ + memory@10000000 { + reg = <0x10000000 0>; + }; }; diff --git a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts new file mode 100644 index 0000000000000..9f7f9f98139dd --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 PHYTEC Messtechnik GmbH + * Author: Christian Hemp <c.hemp@phytec.de> + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-phytec-phycore-som.dtsi" +#include "imx6qdl-phytec-mira.dtsi" + +/ { + model = "PHYTEC phyBOARD-Mira DualLite/Solo Carrier-Board with NAND"; + compatible = "phytec,imx6dl-pbac06-nand", "phytec,imx6dl-pbac06", + "phytec,imx6qdl-pcm058", "fsl,imx6dl"; + + chosen { + stdout-path = &uart2; + }; +}; + +ðphy { + max-speed = <100>; +}; + +&fec { + status = "okay"; +}; + +&gpmi { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi index 964bc2ad3c5d5..7d9888937f12f 100644 --- a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi @@ -16,7 +16,7 @@ model = "Phytec phyFLEX-i.MX6 DualLite/Solo"; compatible = "phytec,imx6dl-pfla02", "fsl,imx6dl"; - memory { + memory@10000000 { reg = <0x10000000 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts index c3a14a4330a27..3fb7f4ee2496f 100644 --- a/arch/arm/boot/dts/imx6dl-rex-basic.dts +++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts @@ -16,7 +16,7 @@ model = "Rex Basic i.MX6 Dual Lite Board"; compatible = "rex,imx6dl-rex-basic", "fsl,imx6dl"; - memory { + memory@10000000 { reg = <0x10000000 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 23e108204e1e7..2e98c92adff74 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -15,7 +15,7 @@ model = "RIoTboard i.MX6S"; compatible = "riot,imx6s-riotboard", "fsl,imx6dl"; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6dl-ts4900.dts b/arch/arm/boot/dts/imx6dl-ts4900.dts index 6ea0b780677d6..cc01a7a22e308 100644 --- a/arch/arm/boot/dts/imx6dl-ts4900.dts +++ b/arch/arm/boot/dts/imx6dl-ts4900.dts @@ -46,4 +46,9 @@ / { model = "Technologic Systems i.MX6 Solo/DualLite TS-4900 (Default Device Tree)"; compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl"; + + /* Will be filled by the bootloader */ + memory@10000000 { + reg = <0x10000000 0>; + }; }; diff --git a/arch/arm/boot/dts/imx6dl-ts7970.dts b/arch/arm/boot/dts/imx6dl-ts7970.dts index d104daf305d9d..82435d5bf33f9 100644 --- a/arch/arm/boot/dts/imx6dl-ts7970.dts +++ b/arch/arm/boot/dts/imx6dl-ts7970.dts @@ -47,4 +47,9 @@ / { model = "Technologic Systems i.MX6 Solo/DualLite TS-7970 (Default Device Tree)"; compatible = "technologic,imx6dl-ts7970", "fsl,imx6dl"; + + /* Will be filled by the bootloader */ + memory@10000000 { + reg = <0x10000000 0>; + }; }; diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts index 8c314eee4fdd7..5727fa48cfd56 100644 --- a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts +++ b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts @@ -16,7 +16,7 @@ model = "Wandboard i.MX6 Dual Lite Board rev B1"; compatible = "wand,imx6dl-wandboard", "fsl,imx6dl"; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts index aa4d4faaaec4e..a72c07db7dda5 100644 --- a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts +++ b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts @@ -16,7 +16,7 @@ model = "Wandboard i.MX6 Dual Lite Board revD1"; compatible = "wand,imx6dl-wandboard", "fsl,imx6dl"; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/imx6dl-wandboard.dts index bbb6167230972..a09f274cd1f49 100644 --- a/arch/arm/boot/dts/imx6dl-wandboard.dts +++ b/arch/arm/boot/dts/imx6dl-wandboard.dts @@ -16,7 +16,7 @@ model = "Wandboard i.MX6 Dual Lite Board"; compatible = "wand,imx6dl-wandboard", "fsl,imx6dl"; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index c01674fa098aa..558bce81209d2 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -80,11 +80,6 @@ reg = <0x020f4000 0x4000>; interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; }; - - lcdif: lcdif@20f8000 { - reg = <0x020f8000 0x4000>; - interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; - }; }; aips2: aips-bus@2100000 { @@ -109,11 +104,6 @@ compatible = "fsl,imx-display-subsystem"; ports = <&ipu1_di0>, <&ipu1_di1>; }; - - gpu-subsystem { - compatible = "fsl,imx-gpu-subsystem"; - cores = <&gpu_2d>, <&gpu_3d>; - }; }; &gpio1 { diff --git a/arch/arm/boot/dts/imx6q-apf6dev.dts b/arch/arm/boot/dts/imx6q-apf6dev.dts index 4e4de821d9e5a..5e72f81cdf8b1 100644 --- a/arch/arm/boot/dts/imx6q-apf6dev.dts +++ b/arch/arm/boot/dts/imx6q-apf6dev.dts @@ -54,7 +54,7 @@ model = "Armadeus APF6 Quad / Dual Module on APF6Dev Board"; compatible = "armadeus,imx6q-apf6dev", "armadeus,imx6q-apf6", "fsl,imx6q"; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index 4989d0bff10f1..953a5b5a8ea41 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -18,7 +18,7 @@ model = "Freescale i.MX6 Quad Armadillo2 Board"; compatible = "fsl,imx6q-arm2", "fsl,imx6q"; - memory { + memory@10000000 { reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index 5fcb0372d58b3..bf4bdb385de9e 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -46,7 +46,7 @@ #include <dt-bindings/gpio/gpio.h> / { - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index 916ea94d75cac..990e411cbca0e 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -353,6 +353,14 @@ }; }; +&pmu { + secure-reg-access; +}; + +&usdhc2 { + status = "disabled"; +}; + &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index bc7587c383f68..65ef4cacbc715 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -50,7 +50,7 @@ model = "CompuLab CM-FX6"; compatible = "compulab,cm-fx6", "fsl,imx6q"; - memory { + memory@10000000 { reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts index fd0ad9a8866c3..ad12d76bbb89a 100644 --- a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts +++ b/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts @@ -20,4 +20,9 @@ / { model = "DFI FS700-M60-6QD i.MX6qd Q7 Board"; compatible = "dfi,fs700-m60-6qd", "dfi,fs700e-m60", "fsl,imx6q"; + + /* Will be filled by the bootloader */ + memory@10000000 { + reg = <0x10000000 0>; + }; }; diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi index 09085fde3341d..85232c7c36a01 100644 --- a/arch/arm/boot/dts/imx6q-display5.dtsi +++ b/arch/arm/boot/dts/imx6q-display5.dtsi @@ -47,7 +47,7 @@ model = "Liebherr (LWN) display5 i.MX6 Quad Board"; compatible = "lwn,display5", "fsl,imx6q"; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index f0316ea96898d..b3c6a4a7897d9 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -29,7 +29,7 @@ stmpe-i2c1 = &stmpe2; }; - memory { + memory@10000000 { reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6q-dms-ba16.dts b/arch/arm/boot/dts/imx6q-dms-ba16.dts new file mode 100644 index 0000000000000..57761f3172fa7 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-dms-ba16.dts @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "imx6q-ba16.dtsi" + +/ { + model = "Advantech DMS-BA16"; + compatible = "advantech,imx6q-dms-ba16", "advantech,imx6q-ba16", "fsl,imx6q"; + + reg_usb_otg_vbus: regulator-usbotgvbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotgvbus>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sys_mclk: clock-sys-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <22000000>; + }; + + sound { + compatible = "fsl,imx6q-ba16-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6q-ba16-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <4>; + }; +}; + +&ecspi5 { + cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi5>; + status = "okay"; + + m25_eeprom: m25p80@0 { + compatible = "atmel,at25256B", "atmel,at25"; + spi-max-frequency = <20000000>; + size = <0x8000>; + pagesize = <64>; + reg = <0>; + address-width = <16>; + }; +}; + +&iomuxc { + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x1b0b0 + MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x1b0b0 + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0 + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x1b0b0 + >; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x1b0b0 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 + >; + }; + + pinctrl_usbotgvbus: usbotgvbusgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0 + >; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&sys_mclk>; + lrclk-strength = <0x3>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&sata { + fsl,no-spread-spectrum; + fsl,transmit-atten-16ths = <12>; + fsl,transmit-boost-mdB = <3330>; + fsl,transmit-level-mV = <1133>; + fsl,receive-dpll-mode = <1>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + dr_mode = "otg"; + disable-over-current; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts index e0aea782c6662..fcd257bc5ac30 100644 --- a/arch/arm/boot/dts/imx6q-evi.dts +++ b/arch/arm/boot/dts/imx6q-evi.dts @@ -50,7 +50,7 @@ model = "Uniwest Evi"; compatible = "uniwest,imx6q-evi", "fsl,imx6q"; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts index b715deb4ea466..0be375611382d 100644 --- a/arch/arm/boot/dts/imx6q-gk802.dts +++ b/arch/arm/boot/dts/imx6q-gk802.dts @@ -18,7 +18,7 @@ stdout-path = &uart4; }; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 29adaa7c72f84..a8f70b4266ef8 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -60,7 +60,7 @@ }; }; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts index 8a2ea6c58902f..714e09e04dcb7 100644 --- a/arch/arm/boot/dts/imx6q-h100.dts +++ b/arch/arm/boot/dts/imx6q-h100.dts @@ -49,6 +49,11 @@ model = "Auvidea H100"; compatible = "auvidea,h100", "fsl,imx6q"; + /* Will be filled by the bootloader */ + memory@10000000 { + reg = <0x10000000 0>; + }; + aliases { rtc0 = &rtc; rtc1 = &snvs_rtc; @@ -161,7 +166,7 @@ status = "okay"; eeprom: 24c02@51 { - compatible = "microchip,24c02", "at24"; + compatible = "microchip,24c02", "atmel,24c02"; reg = <0x51>; }; diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts index 432291bedcf16..dd763f2058190 100644 --- a/arch/arm/boot/dts/imx6q-marsboard.dts +++ b/arch/arm/boot/dts/imx6q-marsboard.dts @@ -47,7 +47,7 @@ model = "Embest MarS Board i.MX6Dual"; compatible = "embest,imx6q-marsboard", "fsl,imx6q"; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts index cab36f48d5f10..b7e9f38cec729 100644 --- a/arch/arm/boot/dts/imx6q-mccmon6.dts +++ b/arch/arm/boot/dts/imx6q-mccmon6.dts @@ -19,7 +19,7 @@ model = "Liebherr (LWN) monitor6 i.MX6 Quad Board"; compatible = "lwn,mccmon6", "fsl,imx6q"; - memory { + memory@10000000 { reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index 7d7dc59507cfd..52f39371188df 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -55,6 +55,11 @@ model = "Kosagi Novena Dual/Quad"; compatible = "kosagi,imx6q-novena", "fsl,imx6q"; + /* Will be filled by the bootloader */ + memory@10000000 { + reg = <0x10000000 0>; + }; + chosen { stdout-path = &uart2; }; diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts new file mode 100644 index 0000000000000..2e70ea5623c66 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 PHYTEC Messtechnik GmbH + * Author: Christian Hemp <c.hemp@phytec.de> + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-phytec-phycore-som.dtsi" +#include "imx6qdl-phytec-mira.dtsi" + +/ { + model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with eMMC"; + compatible = "phytec,imx6q-pbac06-emmc", "phytec,imx6q-pbac06", + "phytec,imx6qdl-pcm058", "fsl,imx6q"; + + chosen { + stdout-path = &uart2; + }; +}; + +&can1 { + status = "okay"; +}; + +&fec { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +&m25p80 { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; + +&usdhc4 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts new file mode 100644 index 0000000000000..65d2e483c1366 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 PHYTEC Messtechnik GmbH + * Author: Christian Hemp <c.hemp@phytec.de> + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-phytec-phycore-som.dtsi" +#include "imx6qdl-phytec-mira.dtsi" + +/ { + model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND"; + compatible = "phytec,imx6q-pbac06-nand", "phytec,imx6q-pbac06", + "phytec,imx6qdl-pcm058", "fsl,imx6q"; + + chosen { + stdout-path = &uart2; + }; +}; + +&can1 { + status = "okay"; +}; + +&fec { + status = "okay"; +}; + +&gpmi { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +&m25p80 { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi index cd20d0a948de4..fad858c30fe9d 100644 --- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi @@ -16,7 +16,7 @@ model = "Phytec phyFLEX-i.MX6 Quad"; compatible = "phytec,imx6q-pfla02", "fsl,imx6q"; - memory { + memory@10000000 { reg = <0x10000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts index 1effb58f304c3..bd57b3b74db75 100644 --- a/arch/arm/boot/dts/imx6q-pistachio.dts +++ b/arch/arm/boot/dts/imx6q-pistachio.dts @@ -56,7 +56,7 @@ stdout-path = &uart4; }; - memory: memory { + memory@10000000 { reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts index 90ea61ae04e94..d6cae73b19272 100644 --- a/arch/arm/boot/dts/imx6q-rex-pro.dts +++ b/arch/arm/boot/dts/imx6q-rex-pro.dts @@ -16,7 +16,7 @@ model = "Rex Pro i.MX6 Quad Board"; compatible = "rex,imx6q-rex-pro", "fsl,imx6q"; - memory { + memory@10000000 { reg = <0x10000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-sbc6x.dts b/arch/arm/boot/dts/imx6q-sbc6x.dts index 255733063ea4b..b7aa2f0b9f535 100644 --- a/arch/arm/boot/dts/imx6q-sbc6x.dts +++ b/arch/arm/boot/dts/imx6q-sbc6x.dts @@ -12,7 +12,7 @@ model = "MicroSys sbc6x board"; compatible = "microsys,sbc6x", "fsl,imx6q"; - memory { + memory@10000000 { reg = <0x10000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index a3cd7afac20a8..505cba776a2df 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -59,7 +59,7 @@ stdout-path = &uart1; }; - memory { + memory@10000000 { reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6q-ts4900.dts b/arch/arm/boot/dts/imx6q-ts4900.dts index fab76f8cd0768..e655107edc564 100644 --- a/arch/arm/boot/dts/imx6q-ts4900.dts +++ b/arch/arm/boot/dts/imx6q-ts4900.dts @@ -46,6 +46,11 @@ / { model = "Technologic Systems i.MX6 Quad TS-4900 (Default Device Tree)"; compatible = "technologic,imx6q-ts4900", "fsl,imx6q"; + + /* Will be filled by the bootloader */ + memory@10000000 { + reg = <0x10000000 0>; + }; }; &sata { diff --git a/arch/arm/boot/dts/imx6q-ts7970.dts b/arch/arm/boot/dts/imx6q-ts7970.dts index f19e18995e681..c615ac4feede1 100644 --- a/arch/arm/boot/dts/imx6q-ts7970.dts +++ b/arch/arm/boot/dts/imx6q-ts7970.dts @@ -47,6 +47,11 @@ / { model = "Technologic Systems i.MX6 Quad TS-7970 (Default Device Tree)"; compatible = "technologic,imx6q-ts7970", "fsl,imx6q"; + + /* Will be filled by the bootloader */ + memory@10000000 { + reg = <0x10000000 0>; + }; }; &sata { diff --git a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts index 9207d80f9cfb6..b763352cddaeb 100644 --- a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts +++ b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts @@ -16,7 +16,7 @@ model = "Wandboard i.MX6 Quad Board rev B1"; compatible = "wand,imx6q-wandboard", "fsl,imx6q"; - memory { + memory@10000000 { reg = <0x10000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts index e87ddb1686692..8691fab210581 100644 --- a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts +++ b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts @@ -16,7 +16,7 @@ model = "Wandboard i.MX6 Quad Board revD1"; compatible = "wand,imx6q-wandboard", "fsl,imx6q"; - memory { + memory@10000000 { reg = <0x10000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-wandboard.dts b/arch/arm/boot/dts/imx6q-wandboard.dts index 4a8a6ee13e9f5..2a3d98c1489a7 100644 --- a/arch/arm/boot/dts/imx6q-wandboard.dts +++ b/arch/arm/boot/dts/imx6q-wandboard.dts @@ -16,7 +16,7 @@ model = "Wandboard i.MX6 Quad Board"; compatible = "wand,imx6q-wandboard", "fsl,imx6q"; - memory { + memory@10000000 { reg = <0x10000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-zii-rdu2.dts b/arch/arm/boot/dts/imx6q-zii-rdu2.dts index 6be8a1eea895c..7da6dde9c8578 100644 --- a/arch/arm/boot/dts/imx6q-zii-rdu2.dts +++ b/arch/arm/boot/dts/imx6q-zii-rdu2.dts @@ -47,4 +47,9 @@ / { model = "ZII RDU2 Board"; compatible = "zii,imx6q-zii-rdu2", "fsl,imx6q"; + + /* Will be filled by the bootloader */ + memory@10000000 { + reg = <0x10000000 0>; + }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index bc581aa5cf178..ae7b3f1078934 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -215,11 +215,6 @@ compatible = "fsl,imx-display-subsystem"; ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>; }; - - gpu-subsystem { - compatible = "fsl,imx-gpu-subsystem"; - cores = <&gpu_2d>, <&gpu_3d>, <&gpu_vg>; - }; }; &gpio1 { diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 4e776e036cbcf..8206683172d20 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -47,6 +47,11 @@ model = "Toradex Apalis iMX6Q/D Module"; compatible = "toradex,apalis_imx6q", "fsl,imx6q"; + /* Will be filled by the bootloader */ + memory@10000000 { + reg = <0x10000000 0>; + }; + backlight: backlight { compatible = "pwm-backlight"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index d1cfdc2641269..9332a31e6c8b9 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -42,6 +42,11 @@ #include <dt-bindings/gpio/gpio.h> / { + /* Will be filled by the bootloader */ + memory@10000000 { + reg = <0x10000000 0>; + }; + ir_recv: ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio3 9 1>; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index dea8fc43c692d..17a7b9c083d06 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -44,7 +44,7 @@ }; }; - memory { + memory@10000000 { reg = <0x10000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 363a44394dad7..b8044681006c6 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -59,7 +59,7 @@ }; }; - memory { + memory@10000000 { reg = <0x10000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index c75385c0cad05..629908fbaa323 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -59,7 +59,7 @@ }; }; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index eab75f3dbaf32..a1a6fb5541e17 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -59,7 +59,7 @@ }; }; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index 30d4662d44801..4e21b38493944 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -74,7 +74,7 @@ }; }; - memory { + memory@10000000 { reg = <0x10000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index c67c106050705..81dae5b5bc874 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -51,7 +51,7 @@ }; }; - memory { + memory@10000000 { reg = <0x10000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi index 1a0faa1a14c8a..c5d95e8d2e099 100644 --- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi @@ -80,7 +80,7 @@ }; }; - memory { + memory@10000000 { reg = <0x10000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi index d894dde6e85d3..b5986efe1090c 100644 --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi @@ -288,6 +288,7 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_1p8v>; VDDIO-supply = <®_3p3v>; diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi index 444425153fc7d..368132274a91d 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi @@ -83,7 +83,7 @@ }; }; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi index fd4b68be9fe93..58124adfd65b5 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi @@ -93,7 +93,7 @@ }; }; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 92583238ca4ad..7e20b47de839b 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -40,6 +40,11 @@ */ / { + /* Will be filled by the bootloader */ + memory@10000000 { + reg = <0x10000000 0>; + }; + chosen { stdout-path = &uart1; }; @@ -239,10 +244,9 @@ pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id { /* - * Similar to pinctrl_usbotg_2, but we want it - * pulled down for a fixed host connection. + * We want it pulled down for a fixed host connection. */ - fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + fsl,pins = <MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059>; }; pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus { diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi index dffbc92e00239..98241acb08a64 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi @@ -40,6 +40,11 @@ */ / { + /* Will be filled by the bootloader */ + memory@10000000 { + reg = <0x10000000 0>; + }; + chosen { stdout-path = &uart1; }; @@ -191,6 +196,7 @@ sgtl5000: codec@a { clocks = <&clks IMX6QDL_CLK_CKO>; compatible = "fsl,sgtl5000"; + #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>; reg = <0x0a>; @@ -409,8 +415,7 @@ pinctrl_hummingboard2_usbotg_id: hummingboard2-usbotg-id { /* - * Similar to pinctrl_usbotg_2, but we want it - * pulled down for a fixed host connection. + * We want it pulled down for a fixed host connection. */ fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; }; diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi index b6220d62f6de0..acc3b11fba2a7 100644 --- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi @@ -44,7 +44,7 @@ #include <dt-bindings/sound/fsl-imx-audmux.h> / { - memory { + memory@10000000 { reg = <0x10000000 0x80000000>; }; @@ -200,7 +200,11 @@ status = "okay"; mdio { - eth_phy: ethernet-phy { + #address-cells = <1>; + #size-cells = <0>; + + eth_phy: ethernet-phy@0 { + reg = <0x0>; rxc-skew-ps = <1140>; txc-skew-ps = <1140>; txen-skew-ps = <600>; diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi index a1b469c142f10..b3a463a5908b5 100644 --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi @@ -45,7 +45,7 @@ #include <dt-bindings/sound/fsl-imx-audmux.h> / { - memory { + memory@10000000 { reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index 4cc4e23cf99c4..aab088f318e8d 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -46,7 +46,7 @@ stdout-path = &uart2; }; - memory { + memory@10000000 { reg = <0x10000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index fd05f7caa4725..87ca6ead40980 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -46,7 +46,7 @@ stdout-path = &uart2; }; - memory { + memory@10000000 { reg = <0x10000000 0xF0000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index 40942d6b94b36..f5b763d392853 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -46,7 +46,7 @@ stdout-path = &uart2; }; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 919b6b7619a45..596866b0a0d2c 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -48,7 +48,7 @@ stdout-path = &uart2; }; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi new file mode 100644 index 0000000000000..9ebd438dce7d8 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi @@ -0,0 +1,390 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 PHYTEC Messtechnik GmbH + * Author: Christian Hemp <c.hemp@phytec.de> + */ + + +/ { + aliases { + rtc0 = &i2c_rtc; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_backlight>; + pwms = <&pwm1 0 5000000>; + status = "okay"; + }; + + gpio_leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpioleds>; + status = "disabled"; + + red { + label = "phyboard-mira:red"; + gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; + }; + + green { + label = "phyboard-mira:green"; + gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; + }; + + blue { + label = "phyboard-mira:blue"; + gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + }; + }; + + reg_backlight: regulator-backlight { + compatible = "regulator-fixed"; + regulator-name = "backlight_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_en_switch: regulator-en-switch { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_en_switch>; + regulator-name = "Enable Switch"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio3 4 GPIO_ACTIVE_HIGH>; + regulator-always-on; + }; + + reg_flexcan1: regulator-flexcan1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1_en>; + regulator-name = "flexcan1-reg"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_panel: regulator-panel { + compatible = "regulator-fixed"; + regulator-name = "panel-power-supply"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + reg_pcie: regulator-pcie { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reg>; + regulator-name = "mPCIe_1V5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&gpio3 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_h1_vbus: usb-h1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbotg_vbus: usbotg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + panel { + compatible = "auo,g104sn02"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel_en>; + power-supply = <®_panel>; + enable-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_flexcan1>; + status = "disabled"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmicec>; + ddc-i2c-bus = <&i2c2>; + status = "disabled"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <400000>; + status = "disabled"; + + stmpe: touchctrl@44 { + compatible = "st,stmpe811"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_stmpe>; + reg = <0x44>; + interrupt-parent = <&gpio7>; + interrupts = <12 IRQ_TYPE_NONE>; + status = "disabled"; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <1>; + st,touch-det-delay = <2>; + st,settling = <2>; + st,fraction-z = <7>; + st,i-drive = <1>; + }; + }; + + i2c_rtc: rtc@68 { + compatible = "microcrystal,rv4162"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_int>; + reg = <0x68>; + interrupt-parent = <&gpio7>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "disabled"; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + status = "disabled"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie>; + status = "disabled"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "disabled"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + disable-over-current; + status = "disabled"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + vbus-supply = <®_usbotg_vbus>; + disable-over-current; + status = "disabled"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>; + no-1-8-v; + status = "disabled"; +}; + +&iomuxc { + pinctrl_panel_en: panelen1grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0xb0b1 + >; + }; + + pinctrl_en_switch: enswitchgrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0xb0b1 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan1_en: flexcan1engrp { + fsl,pins = < + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0xb0b1 + >; + }; + + pinctrl_gpioleds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24 0x1b0b0 + >; + }; + + pinctrl_hdmicec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0xb0b1 + >; + }; + + pinctrl_pcie_reg: pciereggrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0xb0b1 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_rtc_int: rtcintgrp { + fsl,pins = < + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0 + >; + }; + + pinctrl_stmpe: stmpegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB3__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh1_vbus: usbh1vbusgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A20__GPIO2_IO18 0xb0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usbotg_vbus: usbotgvbusgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0xb0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb0b1 /* CD */ + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi index 585b4f6986c1c..7ba317ae899b6 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -13,7 +13,7 @@ / { chosen { - linux,stdout-path = &uart4; + stdout-path = &uart4; }; regulators { diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index d81b0078a100f..c58f3443d55dd 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -15,7 +15,7 @@ model = "Phytec phyFLEX-i.MX6 Quad"; compatible = "phytec,imx6q-pfla02", "fsl,imx6q"; - memory { + memory@10000000 { reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi new file mode 100644 index 0000000000000..6486df3e2942d --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi @@ -0,0 +1,279 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 PHYTEC Messtechnik GmbH + * Author: Christian Hemp <c.hemp@phytec.de> + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + rtc1 = &da9062_rtc; + rtc2 = &snvs_rtc; + }; + + /* + * Set the minimum memory size here and + * let the bootloader set the real size. + */ + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x8000000>; + }; + + gpio_leds_som: somleds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpioleds_som>; + + som-led-green { + label = "phycore:green"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + status = "okay"; + + m25p80: flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <20000000>; + reg = <0>; + status = "disabled"; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-handle = <ðphy>; + phy-mode = "rgmii"; + phy-supply = <&vdd_eth_io>; + phy-reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@3 { + reg = <3>; + txc-skew-ps = <1680>; + rxc-skew-ps = <1860>; + }; + }; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "disabled"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <400000>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + + pmic@58 { + compatible = "dlg,da9062"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + reg = <0x58>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + da9062_rtc: rtc { + compatible = "dlg,da9062-rtc"; + }; + + watchdog { + compatible = "dlg,da9062-watchdog"; + }; + + regulators { + vdd_arm: buck1 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1380000>; + regulator-always-on; + }; + + vdd_soc: buck2 { + regulator-name = "vdd_soc"; + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1380000>; + regulator-always-on; + }; + + vdd_ddr3_1p5: buck3 { + regulator-name = "vdd_ddr3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + vdd_eth_1p2: buck4 { + regulator-name = "vdd_eth"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd_snvs: ldo1 { + regulator-name = "vdd_snvs"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vdd_high: ldo2 { + regulator-name = "vdd_high"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vdd_eth_io: ldo3 { + regulator-name = "vdd_eth_io"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + vdd_emmc_1p8: ldo4 { + regulator-name = "vdd_emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; +}; + +®_arm { + vin-supply = <&vdd_arm>; +}; + +®_pu { + vin-supply = <&vdd_soc>; +}; + +®_soc { + vin-supply = <&vdd_soc>; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + vmmc-supply = <&vdd_emmc_1p8>; + status = "disabled"; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0 + >; + }; + + pinctrl_gpioleds_som: gpioledssomgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1 + MX6QDL_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi index 6e9549ff11da9..039e3b8306c47 100644 --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi @@ -137,7 +137,7 @@ status = "okay"; eeprom@57 { - compatible = "at,24c02"; + compatible = "atmel,24c02"; reg = <0x57>; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 82d6ccb46982d..54b0139e978d3 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -13,7 +13,7 @@ #include <dt-bindings/gpio/gpio.h> / { - memory { + memory@10000000 { reg = <0x10000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 35de7adc997bf..18b65052553dd 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -49,7 +49,7 @@ stdout-path = &uart2; }; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 0a50705b9c189..f019f99003690 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -19,7 +19,7 @@ stdout-path = &uart1; }; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index 6abb66cd7d4ac..f015e2d1cf353 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -61,8 +61,8 @@ sdhc1 = &usdhc2; }; - memory { - reg = <0 0>; /* will be filled by U-Boot */ + memory@10000000 { + reg = <0x10000000 0>; /* will be filled by U-Boot */ }; clocks { diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index 4161b7d4323a3..906387915dc5e 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -35,7 +35,7 @@ pinctrl-names = "default"; }; - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi index 421d6f527609e..38080c1dfaecb 100644 --- a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi +++ b/arch/arm/boot/dts/imx6qdl-var-dart.dtsi @@ -10,7 +10,7 @@ #include <dt-bindings/sound/fsl-imx-audmux.h> / { - memory { + memory@10000000 { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 72f52fcecee18..911f7f0e3ceab 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -305,6 +305,15 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-rdu2"; + current-speed = <1000000>; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + }; + }; }; &ecspi1 { @@ -498,7 +507,7 @@ }; eeprom@54 { - compatible = "at,24c128"; + compatible = "atmel,24c128"; reg = <0x54>; }; @@ -602,6 +611,8 @@ wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v_sd>; vqmmc-supply = <®_3p3v>; + no-1-8-v; + no-sdio; status = "okay"; }; @@ -613,6 +624,8 @@ wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v_sd>; vqmmc-supply = <®_3p3v>; + no-1-8-v; + no-sdio; status = "okay"; }; @@ -622,7 +635,10 @@ bus-width = <8>; vmmc-supply = <®_3p3v>; vqmmc-supply = <®_3p3v>; + no-1-8-v; non-removable; + no-sdio; + no-sd; status = "okay"; }; @@ -805,6 +821,10 @@ }; }; +&wdog1 { + status = "disabled"; +}; + &iomuxc { pinctrl_accel: accelgrp { fsl,pins = < diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 59ff86695a14c..c003e62bf2902 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -23,7 +23,7 @@ * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; reg = <0 0>; }; + memory { device_type = "memory"; }; aliases { ethernet0 = &fec; @@ -143,7 +143,7 @@ }; }; - pmu { + pmu: pmu { compatible = "arm,cortex-a9-pmu"; interrupt-parent = <&gpc>; interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts new file mode 100644 index 0000000000000..f27d7ab42626a --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 PHYTEC Messtechnik GmbH + * Author: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> + */ + +/dts-v1/; +#include "imx6qp.dtsi" +#include "imx6qdl-phytec-phycore-som.dtsi" +#include "imx6qdl-phytec-mira.dtsi" + +/ { + model = "PHYTEC phyBOARD-Mira QuadPlus Carrier-Board with NAND"; + compatible = "phytec,imx6qp-pbac06-nand", "phytec,imx6qp-pbac06", + "phytec,imx6qdl-pcm058", "fsl,imx6qp"; + + chosen { + stdout-path = &uart2; + }; +}; + +&can1 { + status = "okay"; +}; + +&fec { + status = "okay"; +}; + +&gpmi { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +&m25p80 { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts b/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts index f7badd82ce8a9..907ba0c74ba64 100644 --- a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts +++ b/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts @@ -16,7 +16,7 @@ model = "Wandboard i.MX6 QuadPlus Board revD1"; compatible = "wand,imx6qp-wandboard", "fsl,imx6qp"; - memory { + memory@10000000 { reg = <0x10000000 0x80000000>; }; }; diff --git a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts index 547a76677ab3a..de5b50df833cd 100644 --- a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts +++ b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts @@ -47,4 +47,9 @@ / { model = "ZII RDU2+ Board"; compatible = "zii,imx6qp-zii-rdu2", "fsl,imx6qp"; + + /* Will be filled by the bootloader */ + memory@10000000 { + reg = <0x10000000 0>; + }; }; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 2844ab5417599..37e792fdc1602 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -16,7 +16,7 @@ model = "Freescale i.MX6 SoloLite EVK Board"; compatible = "fsl,imx6sl-evk", "fsl,imx6sl"; - memory { + memory@80000000 { reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts index 72c7745f51d33..404e602e67813 100644 --- a/arch/arm/boot/dts/imx6sl-warp.dts +++ b/arch/arm/boot/dts/imx6sl-warp.dts @@ -54,7 +54,7 @@ model = "WaRP Board"; compatible = "warp,imx6sl-warp", "fsl,imx6sl"; - memory { + memory@80000000 { reg = <0x80000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index ae8df3cf687e8..ab6a7e2e7e8f6 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -21,7 +21,7 @@ * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; reg = <0 0>; }; + memory { device_type = "memory"; }; aliases { ethernet0 = &fec; diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index f9d40ee149824..b58f770c40d96 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -52,7 +52,7 @@ t_lcd = &t_lcd; }; - memory { + memory@80000000 { reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index 240a2864d044f..72da5acf35a2b 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -14,7 +14,7 @@ model = "Freescale i.MX6 SoloX Sabre Auto Board"; compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx"; - memory { + memory@80000000 { reg = <0x80000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index d35aa858f9dbd..f8f31872fa144 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -20,7 +20,7 @@ stdout-path = &uart1; }; - memory { + memory@80000000 { reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts index 4d8c6521845fd..252175b592475 100644 --- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts +++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts @@ -20,7 +20,7 @@ stdout-path = &uart1; }; - memory { + memory@80000000 { reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts index 0c1fc1a8f913a..40ccdf43dffc5 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts +++ b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts @@ -48,7 +48,7 @@ model = "UDOO Neo Basic"; compatible = "udoo,neobasic", "fsl,imx6sx"; - memory { + memory@80000000 { reg = <0x80000000 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts index 5d6c2274ee2bb..42bfc8f8f7f6b 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts +++ b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts @@ -48,7 +48,7 @@ model = "UDOO Neo Extended"; compatible = "udoo,neoextended", "fsl,imx6sx"; - memory { + memory@80000000 { reg = <0x80000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts index 653ceb29e28b5..c84c877f09d49 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts +++ b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts @@ -48,7 +48,7 @@ model = "UDOO Neo Full"; compatible = "udoo,neofull", "fsl,imx6sx"; - memory { + memory@80000000 { reg = <0x80000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index fd7879342d0d5..49c7205b8db81 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -22,7 +22,7 @@ * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; reg = <0 0>; }; + memory { device_type = "memory"; }; aliases { can0 = &flexcan1; @@ -188,6 +188,7 @@ <&clks IMX6SX_CLK_GPU>, <&clks IMX6SX_CLK_GPU>; clock-names = "bus", "core", "shader"; + power-domains = <&pd_pu>; }; dma_apbh: dma-apbh@1804000 { @@ -767,6 +768,18 @@ #address-cells = <1>; #size-cells = <0>; + power-domain@0 { + reg = <0>; + #power-domain-cells = <0>; + }; + + pd_pu: power-domain@1 { + reg = <1>; + #power-domain-cells = <0>; + power-supply = <®_soc>; + clocks = <&clks IMX6SX_CLK_GPU>; + }; + pd_pci: power-domain@3 { reg = <3>; #power-domain-cells = <0>; @@ -1355,9 +1368,4 @@ status = "disabled"; }; }; - - gpu-subsystem { - compatible = "fsl,imx-gpu-subsystem"; - cores = <&gpu>; - }; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts index 18fdb088ba1e9..6d720b20e7ed7 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts @@ -9,487 +9,9 @@ /dts-v1/; #include "imx6ul.dtsi" +#include "imx6ul-14x14-evk.dtsi" / { model = "Freescale i.MX6 UltraLite 14x14 EVK Board"; compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul"; - - chosen { - stdout-path = &uart1; - }; - - memory { - reg = <0x80000000 0x20000000>; - }; - - backlight_display: backlight-display { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - status = "okay"; - }; - - - reg_sd1_vmmc: regulator-sd1-vmmc { - compatible = "regulator-fixed"; - regulator-name = "VSD_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "mx6ul-wm8960"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&dailink_master>; - simple-audio-card,frame-master = <&dailink_master>; - simple-audio-card,widgets = - "Microphone", "Mic Jack", - "Line", "Line In", - "Line", "Line Out", - "Speaker", "Speaker", - "Headphone", "Headphone Jack"; - simple-audio-card,routing = - "Headphone Jack", "HP_L", - "Headphone Jack", "HP_R", - "Speaker", "SPK_LP", - "Speaker", "SPK_LN", - "Speaker", "SPK_RP", - "Speaker", "SPK_RN", - "LINPUT1", "Mic Jack", - "LINPUT3", "Mic Jack", - "RINPUT1", "Mic Jack", - "RINPUT2", "Mic Jack"; - - simple-audio-card,cpu { - sound-dai = <&sai2>; - }; - - dailink_master: simple-audio-card,codec { - sound-dai = <&codec>; - clocks = <&clks IMX6UL_CLK_SAI2>; - }; - }; - - panel { - compatible = "innolux,at043tn24"; - backlight = <&backlight_display>; - - port { - panel_in: endpoint { - remote-endpoint = <&display_out>; - }; - }; - }; -}; - -&clks { - assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; - assigned-clock-rates = <786432000>; -}; - -&i2c2 { - clock_frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; - - codec: wm8960@1a { - #sound-dai-cells = <0>; - compatible = "wlf,wm8960"; - reg = <0x1a>; - wlf,shared-lrclk; - }; -}; - -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet1>; - phy-mode = "rmii"; - phy-handle = <ðphy0>; - status = "okay"; -}; - -&fec2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet2>; - phy-mode = "rmii"; - phy-handle = <ðphy1>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@2 { - reg = <2>; - micrel,led-mode = <1>; - clocks = <&clks IMX6UL_CLK_ENET_REF>; - clock-names = "rmii-ref"; - }; - - ethphy1: ethernet-phy@1 { - reg = <1>; - micrel,led-mode = <1>; - clocks = <&clks IMX6UL_CLK_ENET2_REF>; - clock-names = "rmii-ref"; - }; - }; -}; - - -&lcdif { - assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>; - assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcdif_dat - &pinctrl_lcdif_ctrl>; - status = "okay"; - - port { - display_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; -}; - -&pwm1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm1>; - status = "okay"; -}; - -&qspi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_qspi>; - status = "okay"; - - flash0: n25q256a@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "micron,n25q256a"; - spi-max-frequency = <29000000>; - reg = <0>; - }; -}; - -&sai2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai2>; - assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>, - <&clks IMX6UL_CLK_SAI2>; - assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; - assigned-clock-rates = <0>, <12288000>; - fsl,sai-mclk-direction-output; - status = "okay"; -}; - -&snvs_poweroff { - status = "okay"; -}; - -&tsc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_tsc>; - xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; - measure-delay-time = <0xffff>; - pre-charge-time = <0xfff>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - uart-has-rtscts; - status = "okay"; -}; - -&usbotg1 { - dr_mode = "otg"; - status = "okay"; -}; - -&usbotg2 { - dr_mode = "host"; - disable-over-current; - status = "okay"; -}; - -&usbphy1 { - fsl,tx-d-cal = <106>; -}; - -&usbphy2 { - fsl,tx-d-cal = <106>; -}; - -&usdhc1 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc1>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz>; - cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; - keep-power-in-suspend; - wakeup-source; - vmmc-supply = <®_sd1_vmmc>; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - no-1-8-v; - keep-power-in-suspend; - wakeup-source; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; -}; - -&iomuxc { - pinctrl-names = "default"; - - pinctrl_csi1: csi1grp { - fsl,pins = < - MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088 - MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088 - MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088 - MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088 - MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x1b088 - MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x1b088 - MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x1b088 - MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x1b088 - MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x1b088 - MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x1b088 - MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x1b088 - MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x1b088 - >; - }; - - pinctrl_enet1: enet1grp { - fsl,pins = < - MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 - MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 - MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 - MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 - >; - }; - - pinctrl_enet2: enet2grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 - MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 - MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 - MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 - MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 - MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 - >; - }; - - pinctrl_flexcan1: flexcan1grp{ - fsl,pins = < - MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 - MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 - >; - }; - - pinctrl_flexcan2: flexcan2grp{ - fsl,pins = < - MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 - MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 - MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 - MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 - >; - }; - - pinctrl_lcdif_dat: lcdifdatgrp { - fsl,pins = < - MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 - MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 - MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 - MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 - MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 - MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 - MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 - MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 - MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 - MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 - MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 - MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 - MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 - MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 - MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 - MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 - MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 - MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 - MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79 - MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79 - MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79 - MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79 - MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79 - MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79 - >; - }; - - pinctrl_lcdif_ctrl: lcdifctrlgrp { - fsl,pins = < - MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 - MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 - MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 - MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 - /* used for lcd reset */ - MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79 - >; - }; - - pinctrl_qspi: qspigrp { - fsl,pins = < - MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1 - MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1 - MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1 - MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1 - MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1 - MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 - >; - }; - - pinctrl_sai2: sai2grp { - fsl,pins = < - MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 - MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 - MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 - MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 - MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 - MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x17059 - >; - }; - - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0 - >; - }; - - pinctrl_sim2: sim2grp { - fsl,pins = < - MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD 0xb808 - MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK 0x31 - MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B 0xb808 - MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN 0xb808 - MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD 0xb809 - MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x3008 - >; - }; - - pinctrl_tsc: tscgrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 - MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 - MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 - MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 - MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 - MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 - MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1 - MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 - MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */ - MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */ - MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */ - >; - }; - - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { - fsl,pins = < - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 - - >; - }; - - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { - fsl,pins = < - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17059 - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 - >; - }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 - >; - }; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi new file mode 100644 index 0000000000000..32a07232c0345 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -0,0 +1,499 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + chosen { + stdout-path = &uart1; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + backlight_display: backlight-display { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "mx6ul-wm8960"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Speaker", "SPK_LP", + "Speaker", "SPK_LN", + "Speaker", "SPK_RP", + "Speaker", "SPK_RN", + "LINPUT1", "Mic Jack", + "LINPUT3", "Mic Jack", + "RINPUT1", "Mic Jack", + "RINPUT2", "Mic Jack"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&clks IMX6UL_CLK_SAI2>; + }; + }; + + panel { + compatible = "innolux,at043tn24"; + backlight = <&backlight_display>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <786432000>; +}; + +&i2c2 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + codec: wm8960@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8960"; + reg = <0x1a>; + wlf,shared-lrclk; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@2 { + reg = <2>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + mag3110@e { + compatible = "fsl,mag3110"; + reg = <0x0e>; + }; +}; + +&lcdif { + assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; + status = "okay"; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + flash0: n25q256a@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q256a"; + spi-max-frequency = <29000000>; + reg = <0>; + }; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>, + <&clks IMX6UL_CLK_SAI2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&tsc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + measure-delay-time = <0xffff>; + pre-charge-time = <0xfff>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbphy1 { + fsl,tx-d-cal = <106>; +}; + +&usbphy2 { + fsl,tx-d-cal = <106>; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_sd1_vmmc>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_csi1: csi1grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088 + MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088 + MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088 + MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088 + MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x1b088 + MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x1b088 + MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x1b088 + MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x1b088 + MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x1b088 + MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x1b088 + MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x1b088 + MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x1b088 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + >; + }; + + pinctrl_flexcan1: flexcan1grp{ + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp{ + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79 + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79 + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79 + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79 + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79 + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79 + >; + }; + + pinctrl_lcdif_ctrl: lcdifctrlgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + /* used for lcd reset */ + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79 + >; + }; + + pinctrl_qspi: qspigrp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1 + MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1 + MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1 + MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1 + MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1 + MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 + MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x17059 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0 + >; + }; + + pinctrl_sim2: sim2grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD 0xb808 + MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK 0x31 + MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B 0xb808 + MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN 0xb808 + MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD 0xb809 + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x3008 + >; + }; + + pinctrl_tsc: tscgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1 + MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */ + MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */ + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */ + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17059 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-geam.dts b/arch/arm/boot/dts/imx6ul-geam.dts index 571eea7f1c6b4..d81d20f8fc8dd 100644 --- a/arch/arm/boot/dts/imx6ul-geam.dts +++ b/arch/arm/boot/dts/imx6ul-geam.dts @@ -50,7 +50,7 @@ model = "Engicam GEAM6UL Starter Kit"; compatible = "engicam,imx6ul-geam", "fsl,imx6ul"; - memory { + memory@80000000 { reg = <0x80000000 0x08000000>; }; @@ -181,6 +181,7 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; clocks = <&clks IMX6UL_CLK_OSC>; clock-names = "mclk"; VDDA-supply = <®_3p3v>; diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi index 950fb28b630a4..921e12c69a002 100644 --- a/arch/arm/boot/dts/imx6ul-isiot.dtsi +++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi @@ -45,7 +45,7 @@ #include "imx6ul.dtsi" / { - memory { + memory@80000000 { reg = <0x80000000 0x20000000>; }; @@ -142,6 +142,7 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; clocks = <&clks IMX6UL_CLK_OSC>; clock-names = "mclk"; VDDA-supply = <®_3p3v>; diff --git a/arch/arm/boot/dts/imx6ul-litesom.dtsi b/arch/arm/boot/dts/imx6ul-litesom.dtsi index 039721d3dcb42..8f775f6974d1c 100644 --- a/arch/arm/boot/dts/imx6ul-litesom.dtsi +++ b/arch/arm/boot/dts/imx6ul-litesom.dtsi @@ -47,7 +47,7 @@ model = "Grinn i.MX6UL liteSOM"; compatible = "grinn,imx6ul-litesom", "fsl,imx6ul"; - memory { + memory@80000000 { reg = <0x80000000 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi index aec5ccce0321d..a031bee311df4 100644 --- a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi @@ -48,7 +48,7 @@ #include "imx6ul.dtsi" / { - memory { + memory@80000000 { reg = <0x80000000 0>; /* will be filled by U-Boot */ }; diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts index 3bf26ebd4df9f..47682b8c023ce 100644 --- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts @@ -51,7 +51,7 @@ model = "Technexion Pico i.MX6UL Board"; compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul"; - memory { + memory@80000000 { reg = <0x80000000 0x10000000>; }; diff --git a/arch/arm/boot/dts/imx6ul-pinfunc.h b/arch/arm/boot/dts/imx6ul-pinfunc.h index 0034eeb84542f..7b9a4dc384567 100644 --- a/arch/arm/boot/dts/imx6ul-pinfunc.h +++ b/arch/arm/boot/dts/imx6ul-pinfunc.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2015 Freescale Semiconductor, Inc. + * Copyright 2014 - 2015 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -34,14 +34,14 @@ #define MX6UL_PAD_JTAG_MOD__ENET1_REF_CLK_25M 0x0044 0x02d0 0x0000 3 0 #define MX6UL_PAD_JTAG_MOD__CCM_PMIC_RDY 0x0044 0x02d0 0x04c0 4 0 #define MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x0044 0x02d0 0x0000 5 0 -#define MX6UL_PAD_JTAG_MOD__SDMA_EXT_EVENT00 0x0044 0x02d0 0x0000 6 0 +#define MX6UL_PAD_JTAG_MOD__SDMA_EXT_EVENT00 0x0044 0x02d0 0x0610 6 0 #define MX6UL_PAD_JTAG_TMS__SJC_TMS 0x0048 0x02d4 0x0000 0 0 #define MX6UL_PAD_JTAG_TMS__GPT2_CAPTURE1 0x0048 0x02d4 0x0598 1 0 -#define MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x0048 0x02d4 0x0000 2 0 +#define MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x0048 0x02d4 0x05f0 2 0 #define MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x0048 0x02d4 0x0000 3 0 #define MX6UL_PAD_JTAG_TMS__CCM_WAIT 0x0048 0x02d4 0x0000 4 0 #define MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x0048 0x02d4 0x0000 5 0 -#define MX6UL_PAD_JTAG_TMS__SDMA_EXT_EVENT01 0x0048 0x02d4 0x0000 6 0 +#define MX6UL_PAD_JTAG_TMS__SDMA_EXT_EVENT01 0x0048 0x02d4 0x0614 6 0 #define MX6UL_PAD_JTAG_TMS__EPIT1_OUT 0x0048 0x02d4 0x0000 8 0 #define MX6UL_PAD_JTAG_TDO__SJC_TDO 0x004c 0x02d8 0x0000 0 0 #define MX6UL_PAD_JTAG_TDO__GPT2_CAPTURE2 0x004c 0x02d8 0x059c 1 0 @@ -63,12 +63,14 @@ #define MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x0054 0x02e0 0x05f4 2 0 #define MX6UL_PAD_JTAG_TCK__PWM7_OUT 0x0054 0x02e0 0x0000 4 0 #define MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x0054 0x02e0 0x0000 5 0 +#define MX6UL_PAD_JTAG_TCK__OSC32K_32K_OUT 0x0054 0x02e0 0x0000 6 0 #define MX6UL_PAD_JTAG_TCK__SIM2_POWER_FAIL 0x0054 0x02e0 0x0000 8 0 #define MX6UL_PAD_JTAG_TRST_B__SJC_TRSTB 0x0058 0x02e4 0x0000 0 0 #define MX6UL_PAD_JTAG_TRST_B__GPT2_COMPARE3 0x0058 0x02e4 0x0000 1 0 #define MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x0058 0x02e4 0x0000 2 0 #define MX6UL_PAD_JTAG_TRST_B__PWM8_OUT 0x0058 0x02e4 0x0000 4 0 #define MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x0058 0x02e4 0x0000 5 0 +#define MX6UL_PAD_JTAG_TRST_B__REF_CLK_24M 0x0058 0x02e4 0x0000 6 0 #define MX6UL_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS 0x0058 0x02e4 0x0000 8 0 #define MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x005c 0x02e8 0x05ac 0 1 #define MX6UL_PAD_GPIO1_IO00__GPT1_CAPTURE1 0x005c 0x02e8 0x058c 1 0 @@ -94,22 +96,24 @@ #define MX6UL_PAD_GPIO1_IO02__ENET1_REF_CLK_25M 0x0064 0x02f0 0x0000 3 0 #define MX6UL_PAD_GPIO1_IO02__USDHC1_WP 0x0064 0x02f0 0x066c 4 0 #define MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x0064 0x02f0 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO02__SDMA_EXT_EVENT00 0x0064 0x02f0 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO02__SDMA_EXT_EVENT00 0x0064 0x02f0 0x0610 6 1 #define MX6UL_PAD_GPIO1_IO02__SRC_ANY_PU_RESET 0x0064 0x02f0 0x0000 7 0 #define MX6UL_PAD_GPIO1_IO02__UART1_DCE_TX 0x0064 0x02f0 0x0000 8 0 #define MX6UL_PAD_GPIO1_IO02__UART1_DTE_RX 0x0064 0x02f0 0x0624 8 0 #define MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x0068 0x02f4 0x05a8 0 1 #define MX6UL_PAD_GPIO1_IO03__GPT1_COMPARE3 0x0068 0x02f4 0x0000 1 0 #define MX6UL_PAD_GPIO1_IO03__USB_OTG2_OC 0x0068 0x02f4 0x0660 2 0 +#define MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x0068 0x02f4 0x0000 3 0 #define MX6UL_PAD_GPIO1_IO03__USDHC1_CD_B 0x0068 0x02f4 0x0668 4 0 #define MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x0068 0x02f4 0x0000 5 0 -#define MX6UL_PAD_GPIO1_IO03__CCM_DI0_eXT_CLK 0x0068 0x02f4 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO03__CCM_DI0_EXT_CLK 0x0068 0x02f4 0x0000 6 0 #define MX6UL_PAD_GPIO1_IO03__SRC_TESTER_ACK 0x0068 0x02f4 0x0000 7 0 -#define MX6UL_PAD_GPIO1_IO03__UART1_DTE_TX 0x0068 0x02f4 0x0000 8 0 #define MX6UL_PAD_GPIO1_IO03__UART1_DCE_RX 0x0068 0x02f4 0x0624 8 1 +#define MX6UL_PAD_GPIO1_IO03__UART1_DTE_TX 0x0068 0x02f4 0x0000 8 0 #define MX6UL_PAD_GPIO1_IO04__ENET1_REF_CLK1 0x006c 0x02f8 0x0574 0 1 #define MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x006c 0x02f8 0x0000 1 0 #define MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR 0x006c 0x02f8 0x0000 2 0 +#define MX6UL_PAD_GPIO1_IO04__REF_CLK_24M 0x006c 0x02f8 0x0000 3 0 #define MX6UL_PAD_GPIO1_IO04__USDHC1_RESET_B 0x006c 0x02f8 0x0000 4 0 #define MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x006c 0x02f8 0x0000 5 0 #define MX6UL_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN 0x006c 0x02f8 0x0000 6 0 @@ -200,7 +204,7 @@ #define MX6UL_PAD_UART2_TX_DATA__CSI_DATA06 0x0094 0x0320 0x04dc 3 0 #define MX6UL_PAD_UART2_TX_DATA__GPT1_CAPTURE1 0x0094 0x0320 0x058c 4 1 #define MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x0094 0x0320 0x0000 5 0 -#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0 0x0094 0x0320 0x0000 8 0 +#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0 0x0094 0x0320 0x0560 8 0 #define MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0098 0x0324 0x062c 0 1 #define MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0098 0x0324 0x0000 0 0 #define MX6UL_PAD_UART2_RX_DATA__ENET1_TDATA03 0x0098 0x0324 0x0000 1 0 @@ -232,7 +236,7 @@ #define MX6UL_PAD_UART3_TX_DATA__UART3_DTE_RX 0x00a4 0x0330 0x0634 0 0 #define MX6UL_PAD_UART3_TX_DATA__ENET2_RDATA02 0x00a4 0x0330 0x0000 1 0 #define MX6UL_PAD_UART3_TX_DATA__SIM1_PORT0_PD 0x00a4 0x0330 0x0000 2 0 -#define MX6UL_PAD_UART3_TX_DATA__CSI_DATA01 0x00a4 0x0330 0x0000 3 0 +#define MX6UL_PAD_UART3_TX_DATA__CSI_DATA01 0x00a4 0x0330 0x04d4 3 0 #define MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x00a4 0x0330 0x0000 4 0 #define MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS 0x00a4 0x0330 0x0628 4 2 #define MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x00a4 0x0330 0x0000 5 0 @@ -242,7 +246,7 @@ #define MX6UL_PAD_UART3_RX_DATA__UART3_DTE_TX 0x00a8 0x0334 0x0000 0 0 #define MX6UL_PAD_UART3_RX_DATA__ENET2_RDATA03 0x00a8 0x0334 0x0000 1 0 #define MX6UL_PAD_UART3_RX_DATA__SIM2_PORT0_PD 0x00a8 0x0334 0x0000 2 0 -#define MX6UL_PAD_UART3_RX_DATA__CSI_DATA00 0x00a8 0x0334 0x0000 3 0 +#define MX6UL_PAD_UART3_RX_DATA__CSI_DATA00 0x00a8 0x0334 0x04d0 3 0 #define MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x00a8 0x0334 0x0628 4 3 #define MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS 0x00a8 0x0334 0x0000 4 0 #define MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x00a8 0x0334 0x0000 5 0 @@ -251,7 +255,7 @@ #define MX6UL_PAD_UART3_CTS_B__UART3_DTE_RTS 0x00ac 0x0338 0x0630 0 0 #define MX6UL_PAD_UART3_CTS_B__ENET2_RX_CLK 0x00ac 0x0338 0x0000 1 0 #define MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x00ac 0x0338 0x0000 2 0 -#define MX6UL_PAD_UART3_CTS_B__CSI_DATA10 0x00ac 0x0338 0x0000 3 0 +#define MX6UL_PAD_UART3_CTS_B__CSI_DATA10 0x00ac 0x0338 0x04ec 3 0 #define MX6UL_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN 0x00ac 0x0338 0x0000 4 0 #define MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x00ac 0x0338 0x0000 5 0 #define MX6UL_PAD_UART3_CTS_B__EPIT2_OUT 0x00ac 0x0338 0x0000 8 0 @@ -259,7 +263,7 @@ #define MX6UL_PAD_UART3_RTS_B__UART3_DTE_CTS 0x00b0 0x033c 0x0000 0 0 #define MX6UL_PAD_UART3_RTS_B__ENET2_TX_ER 0x00b0 0x033c 0x0000 1 0 #define MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x00b0 0x033c 0x0584 2 0 -#define MX6UL_PAD_UART3_RTS_B__CSI_DATA11 0x00b0 0x033c 0x0000 3 0 +#define MX6UL_PAD_UART3_RTS_B__CSI_DATA11 0x00b0 0x033c 0x04f0 3 0 #define MX6UL_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT 0x00b0 0x033c 0x0000 4 0 #define MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x00b0 0x033c 0x0000 5 0 #define MX6UL_PAD_UART3_RTS_B__WDOG1_WDOG_B 0x00b0 0x033c 0x0000 8 0 @@ -267,7 +271,7 @@ #define MX6UL_PAD_UART4_TX_DATA__UART4_DTE_RX 0x00b4 0x0340 0x063c 0 0 #define MX6UL_PAD_UART4_TX_DATA__ENET2_TDATA02 0x00b4 0x0340 0x0000 1 0 #define MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x00b4 0x0340 0x05a4 2 1 -#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12 0x00b4 0x0340 0x0000 3 0 +#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12 0x00b4 0x0340 0x04f4 3 0 #define MX6UL_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02 0x00b4 0x0340 0x0000 4 0 #define MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x00b4 0x0340 0x0000 5 0 #define MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x00b4 0x0340 0x0544 8 1 @@ -275,23 +279,23 @@ #define MX6UL_PAD_UART4_RX_DATA__UART4_DTE_TX 0x00b8 0x0344 0x0000 0 0 #define MX6UL_PAD_UART4_RX_DATA__ENET2_TDATA03 0x00b8 0x0344 0x0000 1 0 #define MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x00b8 0x0344 0x05a8 2 2 -#define MX6UL_PAD_UART4_RX_DATA__CSI_DATA13 0x00b8 0x0344 0x0000 3 0 +#define MX6UL_PAD_UART4_RX_DATA__CSI_DATA13 0x00b8 0x0344 0x04f8 3 0 #define MX6UL_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01 0x00b8 0x0344 0x0000 4 0 #define MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x00b8 0x0344 0x0000 5 0 -#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0 0x00b8 0x0344 0x0000 8 0 +#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0 0x00b8 0x0344 0x0550 8 1 #define MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x00bc 0x0348 0x0000 5 0 #define MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x00bc 0x0348 0x054c 8 0 #define MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x00bc 0x0348 0x0000 0 0 #define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00bc 0x0348 0x0644 0 4 #define MX6UL_PAD_UART5_TX_DATA__ENET2_CRS 0x00bc 0x0348 0x0000 1 0 #define MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x00bc 0x0348 0x05ac 2 2 -#define MX6UL_PAD_UART5_TX_DATA__CSI_DATA14 0x00bc 0x0348 0x0000 3 0 +#define MX6UL_PAD_UART5_TX_DATA__CSI_DATA14 0x00bc 0x0348 0x04fc 3 0 #define MX6UL_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00 0x00bc 0x0348 0x0000 4 0 #define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00c0 0x034c 0x0644 0 5 #define MX6UL_PAD_UART5_RX_DATA__UART5_DTE_TX 0x00c0 0x034c 0x0000 0 0 #define MX6UL_PAD_UART5_RX_DATA__ENET2_COL 0x00c0 0x034c 0x0000 1 0 #define MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x00c0 0x034c 0x05b0 2 2 -#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15 0x00c0 0x034c 0x0000 3 0 +#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15 0x00c0 0x034c 0x0500 3 0 #define MX6UL_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB 0x00c0 0x034c 0x0000 4 0 #define MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x00c0 0x034c 0x0000 5 0 #define MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x00c0 0x034c 0x0548 8 1 @@ -299,59 +303,61 @@ #define MX6UL_PAD_ENET1_RX_DATA0__UART4_DCE_RTS 0x00c4 0x0350 0x0638 1 0 #define MX6UL_PAD_ENET1_RX_DATA0__UART4_DTE_CTS 0x00c4 0x0350 0x0000 1 0 #define MX6UL_PAD_ENET1_RX_DATA0__PWM1_OUT 0x00c4 0x0350 0x0000 2 0 -#define MX6UL_PAD_ENET1_RX_DATA0__CSI_DATA16 0x00c4 0x0350 0x0000 3 0 +#define MX6UL_PAD_ENET1_RX_DATA0__CSI_DATA16 0x00c4 0x0350 0x0504 3 0 #define MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x00c4 0x0350 0x0000 4 0 #define MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x00c4 0x0350 0x0000 5 0 -#define MX6UL_PAD_ENET1_RX_DATA0__KPP_ROW00 0x00c4 0x0350 0x0000 6 0 +#define MX6UL_PAD_ENET1_RX_DATA0__KPP_ROW00 0x00c4 0x0350 0x05d0 6 0 #define MX6UL_PAD_ENET1_RX_DATA0__USDHC1_LCTL 0x00c4 0x0350 0x0000 8 0 #define MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x00c8 0x0354 0x0000 0 0 #define MX6UL_PAD_ENET1_RX_DATA1__UART4_DCE_CTS 0x00c8 0x0354 0x0000 1 0 #define MX6UL_PAD_ENET1_RX_DATA1__UART4_DTE_RTS 0x00c8 0x0354 0x0638 1 1 #define MX6UL_PAD_ENET1_RX_DATA1__PWM2_OUT 0x00c8 0x0354 0x0000 2 0 -#define MX6UL_PAD_ENET1_RX_DATA1__CSI_DATA17 0x00c8 0x0354 0x0000 3 0 +#define MX6UL_PAD_ENET1_RX_DATA1__CSI_DATA17 0x00c8 0x0354 0x0508 3 0 #define MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x00c8 0x0354 0x0584 4 1 #define MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x00c8 0x0354 0x0000 5 0 -#define MX6UL_PAD_ENET1_RX_DATA1__KPP_COL00 0x00c8 0x0354 0x0000 6 0 +#define MX6UL_PAD_ENET1_RX_DATA1__KPP_COL00 0x00c8 0x0354 0x05c4 6 0 #define MX6UL_PAD_ENET1_RX_DATA1__USDHC2_LCTL 0x00c8 0x0354 0x0000 8 0 #define MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x00cc 0x0358 0x0000 0 0 #define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00cc 0x0358 0x0640 1 3 #define MX6UL_PAD_ENET1_RX_EN__UART5_DTE_CTS 0x00cc 0x0358 0x0000 1 0 -#define MX6UL_PAD_ENET1_RX_EN__CSI_DATA18 0x00cc 0x0358 0x0000 3 0 +#define MX6UL_PAD_ENET1_RX_EN__OSC32K_32K_OUT 0x00cc 0x0358 0x0000 2 0 +#define MX6UL_PAD_ENET1_RX_EN__CSI_DATA18 0x00cc 0x0358 0x050c 3 0 #define MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x00cc 0x0358 0x0000 4 0 #define MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x00cc 0x0358 0x0000 5 0 -#define MX6UL_PAD_ENET1_RX_EN__KPP_ROW01 0x00cc 0x0358 0x0000 6 0 +#define MX6UL_PAD_ENET1_RX_EN__KPP_ROW01 0x00cc 0x0358 0x05d4 6 0 #define MX6UL_PAD_ENET1_RX_EN__USDHC1_VSELECT 0x00cc 0x0358 0x0000 8 0 #define MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x00d0 0x035c 0x0000 0 0 #define MX6UL_PAD_ENET1_TX_DATA0__UART5_DCE_CTS 0x00d0 0x035c 0x0000 1 0 #define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00d0 0x035c 0x0640 1 4 -#define MX6UL_PAD_ENET1_TX_DATA0__CSI_DATA19 0x00d0 0x035c 0x0000 3 0 +#define MX6UL_PAD_ENET1_TX_DATA0__REF_CLK_24M 0x00d0 0x035c 0x0000 2 0 +#define MX6UL_PAD_ENET1_TX_DATA0__CSI_DATA19 0x00d0 0x035c 0x0510 3 0 #define MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x00d0 0x035c 0x0588 4 1 #define MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x00d0 0x035c 0x0000 5 0 -#define MX6UL_PAD_ENET1_TX_DATA0__KPP_COL01 0x00d0 0x035c 0x0000 6 0 +#define MX6UL_PAD_ENET1_TX_DATA0__KPP_COL01 0x00d0 0x035c 0x05c8 6 0 #define MX6UL_PAD_ENET1_TX_DATA0__USDHC2_VSELECT 0x00d0 0x035c 0x0000 8 0 #define MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x00d4 0x0360 0x0000 0 0 #define MX6UL_PAD_ENET1_TX_DATA1__UART6_DCE_CTS 0x00d4 0x0360 0x0000 1 0 #define MX6UL_PAD_ENET1_TX_DATA1__UART6_DTE_RTS 0x00d4 0x0360 0x0648 1 2 #define MX6UL_PAD_ENET1_TX_DATA1__PWM5_OUT 0x00d4 0x0360 0x0000 2 0 -#define MX6UL_PAD_ENET1_TX_DATA1__CSI_DATA20 0x00d4 0x0360 0x0000 3 0 +#define MX6UL_PAD_ENET1_TX_DATA1__CSI_DATA20 0x00d4 0x0360 0x0514 3 0 #define MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO 0x00d4 0x0360 0x0580 4 1 #define MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x00d4 0x0360 0x0000 5 0 -#define MX6UL_PAD_ENET1_TX_DATA1__KPP_ROW02 0x00d4 0x0360 0x0000 6 0 +#define MX6UL_PAD_ENET1_TX_DATA1__KPP_ROW02 0x00d4 0x0360 0x05d8 6 0 #define MX6UL_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB 0x00d4 0x0360 0x0000 8 0 #define MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x00d8 0x0364 0x0000 0 0 #define MX6UL_PAD_ENET1_TX_EN__UART6_DCE_RTS 0x00d8 0x0364 0x0648 1 3 #define MX6UL_PAD_ENET1_TX_EN__UART6_DTE_CTS 0x00d8 0x0364 0x0000 1 0 #define MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00d8 0x0364 0x0000 2 0 -#define MX6UL_PAD_ENET1_TX_EN__CSI_DATA21 0x00d8 0x0364 0x0000 3 0 +#define MX6UL_PAD_ENET1_TX_EN__CSI_DATA21 0x00d8 0x0364 0x0518 3 0 #define MX6UL_PAD_ENET1_TX_EN__ENET2_MDC 0x00d8 0x0364 0x0000 4 0 #define MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05 0x00d8 0x0364 0x0000 5 0 -#define MX6UL_PAD_ENET1_TX_EN__KPP_COL02 0x00d8 0x0364 0x0000 6 0 +#define MX6UL_PAD_ENET1_TX_EN__KPP_COL02 0x00d8 0x0364 0x05cc 6 0 #define MX6UL_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB 0x00d8 0x0364 0x0000 8 0 #define MX6UL_PAD_ENET1_TX_CLK__ENET1_TX_CLK 0x00dc 0x0368 0x0000 0 0 #define MX6UL_PAD_ENET1_TX_CLK__UART7_DCE_CTS 0x00dc 0x0368 0x0000 1 0 #define MX6UL_PAD_ENET1_TX_CLK__UART7_DTE_RTS 0x00dc 0x0368 0x0650 1 0 #define MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00dc 0x0368 0x0000 2 0 -#define MX6UL_PAD_ENET1_TX_CLK__CSI_DATA22 0x00dc 0x0368 0x0000 3 0 +#define MX6UL_PAD_ENET1_TX_CLK__CSI_DATA22 0x00dc 0x0368 0x051c 3 0 #define MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x00dc 0x0368 0x0574 4 2 #define MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06 0x00dc 0x0368 0x0000 5 0 #define MX6UL_PAD_ENET1_TX_CLK__KPP_ROW03 0x00dc 0x0368 0x0000 6 0 @@ -360,7 +366,7 @@ #define MX6UL_PAD_ENET1_RX_ER__UART7_DCE_RTS 0x00e0 0x036c 0x0650 1 1 #define MX6UL_PAD_ENET1_RX_ER__UART7_DTE_CTS 0x00e0 0x036c 0x0000 1 0 #define MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x00e0 0x036c 0x0000 2 0 -#define MX6UL_PAD_ENET1_RX_ER__CSI_DATA23 0x00e0 0x036c 0x0000 3 0 +#define MX6UL_PAD_ENET1_RX_ER__CSI_DATA23 0x00e0 0x036c 0x0520 3 0 #define MX6UL_PAD_ENET1_RX_ER__EIM_CRE 0x00e0 0x036c 0x0000 4 0 #define MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x00e0 0x036c 0x0000 5 0 #define MX6UL_PAD_ENET1_RX_ER__KPP_COL03 0x00e0 0x036c 0x0000 6 0 @@ -377,7 +383,7 @@ #define MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x00e8 0x0374 0x0000 0 0 #define MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX 0x00e8 0x0374 0x064c 1 2 #define MX6UL_PAD_ENET2_RX_DATA1__UART6_DTE_TX 0x00e8 0x0374 0x0000 1 0 -#define MX6UL_PAD_ENET2_RX_DATA1__SIM1_PORT0_cLK 0x00e8 0x0374 0x0000 2 0 +#define MX6UL_PAD_ENET2_RX_DATA1__SIM1_PORT0_CLK 0x00e8 0x0374 0x0000 2 0 #define MX6UL_PAD_ENET2_RX_DATA1__I2C3_SDA 0x00e8 0x0374 0x05b8 3 1 #define MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC 0x00e8 0x0374 0x0000 4 0 #define MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x00e8 0x0374 0x0000 5 0 @@ -400,6 +406,7 @@ #define MX6UL_PAD_ENET2_TX_DATA0__EIM_EB_B02 0x00f0 0x037c 0x0000 4 0 #define MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x00f0 0x037c 0x0000 5 0 #define MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05 0x00f0 0x037c 0x0000 6 0 +#define MX6UL_PAD_ENET2_TX_DATA0__REF_CLK_24M 0x00f0 0x037c 0x0000 8 0 #define MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x00f4 0x0380 0x0000 0 0 #define MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x00f4 0x0380 0x0000 1 0 #define MX6UL_PAD_ENET2_TX_DATA1__UART8_DTE_RX 0x00f4 0x0380 0x065c 1 0 @@ -412,7 +419,7 @@ #define MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x00f8 0x0384 0x0000 0 0 #define MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x00f8 0x0384 0x065c 1 1 #define MX6UL_PAD_ENET2_TX_EN__UART8_DTE_TX 0x00f8 0x0384 0x0000 1 0 -#define MX6UL_PAD_ENET2_TX_EN__SIM2_PORT0_cLK 0x00f8 0x0384 0x0000 2 0 +#define MX6UL_PAD_ENET2_TX_EN__SIM2_PORT0_CLK 0x00f8 0x0384 0x0000 2 0 #define MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI 0x00f8 0x0384 0x056c 3 0 #define MX6UL_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN 0x00f8 0x0384 0x0000 4 0 #define MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x00f8 0x0384 0x0000 5 0 @@ -431,7 +438,7 @@ #define MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x0100 0x038c 0x0658 1 1 #define MX6UL_PAD_ENET2_RX_ER__UART8_DTE_CTS 0x0100 0x038c 0x0000 1 0 #define MX6UL_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN 0x0100 0x038c 0x0000 2 0 -#define MX6UL_PAD_ENET2_RX_ER__ECSPI4_SS0 0x0100 0x038c 0x0000 3 0 +#define MX6UL_PAD_ENET2_RX_ER__ECSPI4_SS0 0x0100 0x038c 0x0570 3 0 #define MX6UL_PAD_ENET2_RX_ER__EIM_ADDR25 0x0100 0x038c 0x0000 4 0 #define MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x0100 0x038c 0x0000 5 0 #define MX6UL_PAD_ENET2_RX_ER__KPP_COL07 0x0100 0x038c 0x0000 6 0 @@ -440,7 +447,7 @@ #define MX6UL_PAD_LCD_CLK__LCDIF_WR_RWN 0x0104 0x0390 0x0000 1 0 #define MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x0104 0x0390 0x0000 2 0 #define MX6UL_PAD_LCD_CLK__UART4_DTE_RX 0x0104 0x0390 0x063c 2 2 -#define MX6UL_PAD_LCD_CLK__SAI3_MCLK 0x0104 0x0390 0x0000 3 0 +#define MX6UL_PAD_LCD_CLK__SAI3_MCLK 0x0104 0x0390 0x0600 3 0 #define MX6UL_PAD_LCD_CLK__EIM_CS2_B 0x0104 0x0390 0x0000 4 0 #define MX6UL_PAD_LCD_CLK__GPIO3_IO00 0x0104 0x0390 0x0000 5 0 #define MX6UL_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB 0x0104 0x0390 0x0000 8 0 @@ -464,7 +471,7 @@ #define MX6UL_PAD_LCD_VSYNC__LCDIF_BUSY 0x0110 0x039c 0x05dc 1 1 #define MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS 0x0110 0x039c 0x0638 2 3 #define MX6UL_PAD_LCD_VSYNC__UART4_DTE_CTS 0x0110 0x039c 0x0000 2 0 -#define MX6UL_PAD_LCD_VSYNC__SAI3_RX_DATA 0x0110 0x039c 0x0000 3 0 +#define MX6UL_PAD_LCD_VSYNC__SAI3_RX_DATA 0x0110 0x039c 0x0604 3 0 #define MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B 0x0110 0x039c 0x0000 4 0 #define MX6UL_PAD_LCD_VSYNC__GPIO3_IO03 0x0110 0x039c 0x0000 5 0 #define MX6UL_PAD_LCD_VSYNC__ECSPI2_SS2 0x0110 0x039c 0x0000 8 0 @@ -477,13 +484,15 @@ #define MX6UL_PAD_LCD_RESET__ECSPI2_SS3 0x0114 0x03a0 0x0000 8 0 #define MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x0118 0x03a4 0x0000 0 0 #define MX6UL_PAD_LCD_DATA00__PWM1_OUT 0x0118 0x03a4 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA00__CA7_MX6UL_TRACE0 0x0118 0x03a4 0x0000 2 0 #define MX6UL_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN 0x0118 0x03a4 0x0000 3 0 #define MX6UL_PAD_LCD_DATA00__I2C3_SDA 0x0118 0x03a4 0x05b8 4 2 #define MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0x0118 0x03a4 0x0000 5 0 #define MX6UL_PAD_LCD_DATA00__SRC_BT_CFG00 0x0118 0x03a4 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA00__SAI1_MCLK 0x0118 0x03a4 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA00__SAI1_MCLK 0x0118 0x03a4 0x05e0 8 1 #define MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x011c 0x03a8 0x0000 0 0 #define MX6UL_PAD_LCD_DATA01__PWM2_OUT 0x011c 0x03a8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA01__CA7_MX6UL_TRACE1 0x011c 0x03a8 0x0000 2 0 #define MX6UL_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT 0x011c 0x03a8 0x0000 3 0 #define MX6UL_PAD_LCD_DATA01__I2C3_SCL 0x011c 0x03a8 0x05b4 4 2 #define MX6UL_PAD_LCD_DATA01__GPIO3_IO06 0x011c 0x03a8 0x0000 5 0 @@ -491,6 +500,7 @@ #define MX6UL_PAD_LCD_DATA01__SAI1_TX_SYNC 0x011c 0x03a8 0x05ec 8 0 #define MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x0120 0x03ac 0x0000 0 0 #define MX6UL_PAD_LCD_DATA02__PWM3_OUT 0x0120 0x03ac 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA02__CA7_MX6UL_TRACE2 0x0120 0x03ac 0x0000 2 0 #define MX6UL_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN 0x0120 0x03ac 0x0000 3 0 #define MX6UL_PAD_LCD_DATA02__I2C4_SDA 0x0120 0x03ac 0x05c0 4 2 #define MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0x0120 0x03ac 0x0000 5 0 @@ -498,14 +508,16 @@ #define MX6UL_PAD_LCD_DATA02__SAI1_TX_BCLK 0x0120 0x03ac 0x05e8 8 0 #define MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x0124 0x03b0 0x0000 0 0 #define MX6UL_PAD_LCD_DATA03__PWM4_OUT 0x0124 0x03b0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA03__CA7_MX6UL_TRACE3 0x0124 0x03b0 0x0000 2 0 #define MX6UL_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT 0x0124 0x03b0 0x0000 3 0 #define MX6UL_PAD_LCD_DATA03__I2C4_SCL 0x0124 0x03b0 0x05bc 4 2 #define MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0x0124 0x03b0 0x0000 5 0 #define MX6UL_PAD_LCD_DATA03__SRC_BT_CFG03 0x0124 0x03b0 0x0000 6 0 -#define MX6UL_PAD_LCD_DATA03__SAI1_RX_DATA 0x0124 0x03b0 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA03__SAI1_RX_DATA 0x0124 0x03b0 0x05e4 8 0 #define MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x0128 0x03b4 0x0000 0 0 #define MX6UL_PAD_LCD_DATA04__UART8_DCE_CTS 0x0128 0x03b4 0x0000 1 0 #define MX6UL_PAD_LCD_DATA04__UART8_DTE_RTS 0x0128 0x03b4 0x0658 1 2 +#define MX6UL_PAD_LCD_DATA04__CA7_MX6UL_TRACE4 0x0128 0x03b4 0x0000 2 0 #define MX6UL_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN 0x0128 0x03b4 0x0000 3 0 #define MX6UL_PAD_LCD_DATA04__SPDIF_SR_CLK 0x0128 0x03b4 0x0000 4 0 #define MX6UL_PAD_LCD_DATA04__GPIO3_IO09 0x0128 0x03b4 0x0000 5 0 @@ -514,6 +526,7 @@ #define MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x012c 0x03b8 0x0000 0 0 #define MX6UL_PAD_LCD_DATA05__UART8_DCE_RTS 0x012c 0x03b8 0x0658 1 3 #define MX6UL_PAD_LCD_DATA05__UART8_DTE_CTS 0x012c 0x03b8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA05__CA7_MX6UL_TRACE5 0x012c 0x03b8 0x0000 2 0 #define MX6UL_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT 0x012c 0x03b8 0x0000 3 0 #define MX6UL_PAD_LCD_DATA05__SPDIF_OUT 0x012c 0x03b8 0x0000 4 0 #define MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x012c 0x03b8 0x0000 5 0 @@ -522,6 +535,7 @@ #define MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x0130 0x03bc 0x0000 0 0 #define MX6UL_PAD_LCD_DATA06__UART7_DCE_CTS 0x0130 0x03bc 0x0000 1 0 #define MX6UL_PAD_LCD_DATA06__UART7_DTE_RTS 0x0130 0x03bc 0x0650 1 2 +#define MX6UL_PAD_LCD_DATA06__CA7_MX6UL_TRACE6 0x0130 0x03bc 0x0000 2 0 #define MX6UL_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN 0x0130 0x03bc 0x0000 3 0 #define MX6UL_PAD_LCD_DATA06__SPDIF_LOCK 0x0130 0x03bc 0x0000 4 0 #define MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x0130 0x03bc 0x0000 5 0 @@ -530,6 +544,7 @@ #define MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x0134 0x03c0 0x0000 0 0 #define MX6UL_PAD_LCD_DATA07__UART7_DCE_RTS 0x0134 0x03c0 0x0650 1 3 #define MX6UL_PAD_LCD_DATA07__UART7_DTE_CTS 0x0134 0x03c0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA07__CA7_MX6UL_TRACE7 0x0134 0x03c0 0x0000 2 0 #define MX6UL_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT 0x0134 0x03c0 0x0000 3 0 #define MX6UL_PAD_LCD_DATA07__SPDIF_EXT_CLK 0x0134 0x03c0 0x061c 4 0 #define MX6UL_PAD_LCD_DATA07__GPIO3_IO12 0x0134 0x03c0 0x0000 5 0 @@ -537,56 +552,64 @@ #define MX6UL_PAD_LCD_DATA07__ECSPI1_SS3 0x0134 0x03c0 0x0000 8 0 #define MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x0138 0x03c4 0x0000 0 0 #define MX6UL_PAD_LCD_DATA08__SPDIF_IN 0x0138 0x03c4 0x0618 1 2 -#define MX6UL_PAD_LCD_DATA08__CSI_DATA16 0x0138 0x03c4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA08__CA7_MX6UL_TRACE8 0x0138 0x03c4 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA08__CSI_DATA16 0x0138 0x03c4 0x0504 3 1 #define MX6UL_PAD_LCD_DATA08__EIM_DATA00 0x0138 0x03c4 0x0000 4 0 #define MX6UL_PAD_LCD_DATA08__GPIO3_IO13 0x0138 0x03c4 0x0000 5 0 #define MX6UL_PAD_LCD_DATA08__SRC_BT_CFG08 0x0138 0x03c4 0x0000 6 0 #define MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX 0x0138 0x03c4 0x0000 8 0 #define MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x013c 0x03c8 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA09__SAI3_MCLK 0x013c 0x03c8 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA09__CSI_DATA17 0x013c 0x03c8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA09__SAI3_MCLK 0x013c 0x03c8 0x0600 1 1 +#define MX6UL_PAD_LCD_DATA09__CA7_MX6UL_TRACE9 0x013c 0x03c8 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA09__CSI_DATA17 0x013c 0x03c8 0x0508 3 1 #define MX6UL_PAD_LCD_DATA09__EIM_DATA01 0x013c 0x03c8 0x0000 4 0 #define MX6UL_PAD_LCD_DATA09__GPIO3_IO14 0x013c 0x03c8 0x0000 5 0 #define MX6UL_PAD_LCD_DATA09__SRC_BT_CFG09 0x013c 0x03c8 0x0000 6 0 #define MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX 0x013c 0x03c8 0x0584 8 2 #define MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x0140 0x03cc 0x0000 0 0 #define MX6UL_PAD_LCD_DATA10__SAI3_RX_SYNC 0x0140 0x03cc 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA10__CSI_DATA18 0x0140 0x03cc 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA10__CA7_MX6UL_TRACE10 0x0140 0x03cc 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA10__CSI_DATA18 0x0140 0x03cc 0x050c 3 1 #define MX6UL_PAD_LCD_DATA10__EIM_DATA02 0x0140 0x03cc 0x0000 4 0 #define MX6UL_PAD_LCD_DATA10__GPIO3_IO15 0x0140 0x03cc 0x0000 5 0 #define MX6UL_PAD_LCD_DATA10__SRC_BT_CFG10 0x0140 0x03cc 0x0000 6 0 #define MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX 0x0140 0x03cc 0x0000 8 0 #define MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x0144 0x03d0 0x0000 0 0 #define MX6UL_PAD_LCD_DATA11__SAI3_RX_BCLK 0x0144 0x03d0 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA11__CSI_DATA19 0x0144 0x03d0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA11__CA7_MX6UL_TRACE11 0x0144 0x03d0 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA11__CSI_DATA19 0x0144 0x03d0 0x0510 3 1 #define MX6UL_PAD_LCD_DATA11__EIM_DATA03 0x0144 0x03d0 0x0000 4 0 #define MX6UL_PAD_LCD_DATA11__GPIO3_IO16 0x0144 0x03d0 0x0000 5 0 #define MX6UL_PAD_LCD_DATA11__SRC_BT_CFG11 0x0144 0x03d0 0x0000 6 0 #define MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX 0x0144 0x03d0 0x0588 8 2 #define MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x0148 0x03d4 0x0000 0 0 #define MX6UL_PAD_LCD_DATA12__SAI3_TX_SYNC 0x0148 0x03d4 0x060c 1 1 -#define MX6UL_PAD_LCD_DATA12__CSI_DATA20 0x0148 0x03d4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA12__CA7_MX6UL_TRACE12 0x0148 0x03d4 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA12__CSI_DATA20 0x0148 0x03d4 0x0514 3 1 #define MX6UL_PAD_LCD_DATA12__EIM_DATA04 0x0148 0x03d4 0x0000 4 0 #define MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x0148 0x03d4 0x0000 5 0 #define MX6UL_PAD_LCD_DATA12__SRC_BT_CFG12 0x0148 0x03d4 0x0000 6 0 #define MX6UL_PAD_LCD_DATA12__ECSPI1_RDY 0x0148 0x03d4 0x0000 8 0 #define MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x014c 0x03d8 0x0000 0 0 #define MX6UL_PAD_LCD_DATA13__SAI3_TX_BCLK 0x014c 0x03d8 0x0608 1 1 -#define MX6UL_PAD_LCD_DATA13__CSI_DATA21 0x014c 0x03d8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA13__CA7_MX6UL_TRACE13 0x014c 0x03d8 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA13__CSI_DATA21 0x014c 0x03d8 0x0518 3 1 #define MX6UL_PAD_LCD_DATA13__EIM_DATA05 0x014c 0x03d8 0x0000 4 0 #define MX6UL_PAD_LCD_DATA13__GPIO3_IO18 0x014c 0x03d8 0x0000 5 0 #define MX6UL_PAD_LCD_DATA13__SRC_BT_CFG13 0x014c 0x03d8 0x0000 6 0 #define MX6UL_PAD_LCD_DATA13__USDHC2_RESET_B 0x014c 0x03d8 0x0000 8 0 #define MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x0150 0x03dc 0x0000 0 0 -#define MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA 0x0150 0x03dc 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA14__CSI_DATA22 0x0150 0x03dc 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA 0x0150 0x03dc 0x0604 1 1 +#define MX6UL_PAD_LCD_DATA14__CA7_MX6UL_TRACE14 0x0150 0x03dc 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA14__CSI_DATA22 0x0150 0x03dc 0x051c 3 1 #define MX6UL_PAD_LCD_DATA14__EIM_DATA06 0x0150 0x03dc 0x0000 4 0 #define MX6UL_PAD_LCD_DATA14__GPIO3_IO19 0x0150 0x03dc 0x0000 5 0 #define MX6UL_PAD_LCD_DATA14__SRC_BT_CFG14 0x0150 0x03dc 0x0000 6 0 #define MX6UL_PAD_LCD_DATA14__USDHC2_DATA4 0x0150 0x03dc 0x068c 8 0 #define MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x0154 0x03e0 0x0000 0 0 #define MX6UL_PAD_LCD_DATA15__SAI3_TX_DATA 0x0154 0x03e0 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA15__CSI_DATA23 0x0154 0x03e0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA15__CA7_MX6UL_TRACE15 0x0154 0x03e0 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA15__CSI_DATA23 0x0154 0x03e0 0x0520 3 1 #define MX6UL_PAD_LCD_DATA15__EIM_DATA07 0x0154 0x03e0 0x0000 4 0 #define MX6UL_PAD_LCD_DATA15__GPIO3_IO20 0x0154 0x03e0 0x0000 5 0 #define MX6UL_PAD_LCD_DATA15__SRC_BT_CFG15 0x0154 0x03e0 0x0000 6 0 @@ -594,7 +617,8 @@ #define MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x0158 0x03e4 0x0000 0 0 #define MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x0158 0x03e4 0x0000 1 0 #define MX6UL_PAD_LCD_DATA16__UART7_DTE_RX 0x0158 0x03e4 0x0654 1 2 -#define MX6UL_PAD_LCD_DATA16__CSI_DATA01 0x0158 0x03e4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA16__CA7_MX6UL_TRACE_CLK 0x0158 0x03e4 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA16__CSI_DATA01 0x0158 0x03e4 0x04d4 3 1 #define MX6UL_PAD_LCD_DATA16__EIM_DATA08 0x0158 0x03e4 0x0000 4 0 #define MX6UL_PAD_LCD_DATA16__GPIO3_IO21 0x0158 0x03e4 0x0000 5 0 #define MX6UL_PAD_LCD_DATA16__SRC_BT_CFG24 0x0158 0x03e4 0x0000 6 0 @@ -602,7 +626,8 @@ #define MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x015c 0x03e8 0x0000 0 0 #define MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x015c 0x03e8 0x0654 1 3 #define MX6UL_PAD_LCD_DATA17__UART7_DTE_TX 0x015c 0x03e8 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA17__CSI_DATA00 0x015c 0x03e8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA17__CA7_MX6UL_TRACE_CTL 0x015c 0x03e8 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA17__CSI_DATA00 0x015c 0x03e8 0x04d0 3 1 #define MX6UL_PAD_LCD_DATA17__EIM_DATA09 0x015c 0x03e8 0x0000 4 0 #define MX6UL_PAD_LCD_DATA17__GPIO3_IO22 0x015c 0x03e8 0x0000 5 0 #define MX6UL_PAD_LCD_DATA17__SRC_BT_CFG25 0x015c 0x03e8 0x0000 6 0 @@ -610,7 +635,7 @@ #define MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x0160 0x03ec 0x0000 0 0 #define MX6UL_PAD_LCD_DATA18__PWM5_OUT 0x0160 0x03ec 0x0000 1 0 #define MX6UL_PAD_LCD_DATA18__CA7_MX6UL_EVENTO 0x0160 0x03ec 0x0000 2 0 -#define MX6UL_PAD_LCD_DATA18__CSI_DATA10 0x0160 0x03ec 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA18__CSI_DATA10 0x0160 0x03ec 0x04ec 3 1 #define MX6UL_PAD_LCD_DATA18__EIM_DATA10 0x0160 0x03ec 0x0000 4 0 #define MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x0160 0x03ec 0x0000 5 0 #define MX6UL_PAD_LCD_DATA18__SRC_BT_CFG26 0x0160 0x03ec 0x0000 6 0 @@ -622,7 +647,7 @@ #define MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x0164 0x03f0 0x0000 0 0 #define MX6UL_PAD_LCD_DATA19__PWM6_OUT 0x0164 0x03f0 0x0000 1 0 #define MX6UL_PAD_LCD_DATA19__WDOG1_WDOG_ANY 0x0164 0x03f0 0x0000 2 0 -#define MX6UL_PAD_LCD_DATA19__CSI_DATA11 0x0164 0x03f0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA19__CSI_DATA11 0x0164 0x03f0 0x04f0 3 1 #define MX6UL_PAD_LCD_DATA20__EIM_DATA12 0x0168 0x03f4 0x0000 4 0 #define MX6UL_PAD_LCD_DATA20__GPIO3_IO25 0x0168 0x03f4 0x0000 5 0 #define MX6UL_PAD_LCD_DATA20__SRC_BT_CFG28 0x0168 0x03f4 0x0000 6 0 @@ -631,12 +656,12 @@ #define MX6UL_PAD_LCD_DATA20__UART8_DCE_TX 0x0168 0x03f4 0x0000 1 0 #define MX6UL_PAD_LCD_DATA20__UART8_DTE_RX 0x0168 0x03f4 0x065c 1 2 #define MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x0168 0x03f4 0x0534 2 0 -#define MX6UL_PAD_LCD_DATA20__CSI_DATA12 0x0168 0x03f4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA20__CSI_DATA12 0x0168 0x03f4 0x04f4 3 1 #define MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x016c 0x03f8 0x0000 0 0 #define MX6UL_PAD_LCD_DATA21__UART8_DCE_RX 0x016c 0x03f8 0x065c 1 3 #define MX6UL_PAD_LCD_DATA21__UART8_DTE_TX 0x016c 0x03f8 0x0000 1 0 -#define MX6UL_PAD_LCD_DATA21__ECSPI1_SS0 0x016c 0x03f8 0x0000 2 0 -#define MX6UL_PAD_LCD_DATA21__CSI_DATA13 0x016c 0x03f8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA21__ECSPI1_SS0 0x016c 0x03f8 0x0540 2 0 +#define MX6UL_PAD_LCD_DATA21__CSI_DATA13 0x016c 0x03f8 0x04f8 3 1 #define MX6UL_PAD_LCD_DATA21__EIM_DATA13 0x016c 0x03f8 0x0000 4 0 #define MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x016c 0x03f8 0x0000 5 0 #define MX6UL_PAD_LCD_DATA21__SRC_BT_CFG29 0x016c 0x03f8 0x0000 6 0 @@ -644,7 +669,7 @@ #define MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x0170 0x03fc 0x0000 0 0 #define MX6UL_PAD_LCD_DATA22__MQS_RIGHT 0x0170 0x03fc 0x0000 1 0 #define MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x0170 0x03fc 0x053c 2 0 -#define MX6UL_PAD_LCD_DATA22__CSI_DATA14 0x0170 0x03fc 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA22__CSI_DATA14 0x0170 0x03fc 0x04fc 3 1 #define MX6UL_PAD_LCD_DATA22__EIM_DATA14 0x0170 0x03fc 0x0000 4 0 #define MX6UL_PAD_LCD_DATA22__GPIO3_IO27 0x0170 0x03fc 0x0000 5 0 #define MX6UL_PAD_LCD_DATA22__SRC_BT_CFG30 0x0170 0x03fc 0x0000 6 0 @@ -652,7 +677,7 @@ #define MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x0174 0x0400 0x0000 0 0 #define MX6UL_PAD_LCD_DATA23__MQS_LEFT 0x0174 0x0400 0x0000 1 0 #define MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x0174 0x0400 0x0538 2 0 -#define MX6UL_PAD_LCD_DATA23__CSI_DATA15 0x0174 0x0400 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA23__CSI_DATA15 0x0174 0x0400 0x0500 3 1 #define MX6UL_PAD_LCD_DATA23__EIM_DATA15 0x0174 0x0400 0x0000 4 0 #define MX6UL_PAD_LCD_DATA23__GPIO3_IO28 0x0174 0x0400 0x0000 5 0 #define MX6UL_PAD_LCD_DATA23__SRC_BT_CFG31 0x0174 0x0400 0x0000 6 0 @@ -660,42 +685,42 @@ #define MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0178 0x0404 0x0000 0 0 #define MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x0178 0x0404 0x0670 1 2 #define MX6UL_PAD_NAND_RE_B__QSPI_B_SCLK 0x0178 0x0404 0x0000 2 0 -#define MX6UL_PAD_NAND_RE_B__KPP_ROW00 0x0178 0x0404 0x0000 3 0 +#define MX6UL_PAD_NAND_RE_B__KPP_ROW00 0x0178 0x0404 0x05d0 3 1 #define MX6UL_PAD_NAND_RE_B__EIM_EB_B00 0x0178 0x0404 0x0000 4 0 #define MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0178 0x0404 0x0000 5 0 #define MX6UL_PAD_NAND_RE_B__ECSPI3_SS2 0x0178 0x0404 0x0000 8 0 #define MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x017c 0x0408 0x0000 0 0 #define MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x017c 0x0408 0x0678 1 2 #define MX6UL_PAD_NAND_WE_B__QSPI_B_SS0_B 0x017c 0x0408 0x0000 2 0 -#define MX6UL_PAD_NAND_WE_B__KPP_COL00 0x017c 0x0408 0x0000 3 0 +#define MX6UL_PAD_NAND_WE_B__KPP_COL00 0x017c 0x0408 0x05c4 3 1 #define MX6UL_PAD_NAND_WE_B__EIM_EB_B01 0x017c 0x0408 0x0000 4 0 #define MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x017c 0x0408 0x0000 5 0 #define MX6UL_PAD_NAND_WE_B__ECSPI3_SS3 0x017c 0x0408 0x0000 8 0 #define MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0180 0x040c 0x0000 0 0 #define MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x0180 0x040c 0x067c 1 2 #define MX6UL_PAD_NAND_DATA00__QSPI_B_SS1_B 0x0180 0x040c 0x0000 2 0 -#define MX6UL_PAD_NAND_DATA00__KPP_ROW01 0x0180 0x040c 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA00__KPP_ROW01 0x0180 0x040c 0x05d4 3 1 #define MX6UL_PAD_NAND_DATA00__EIM_AD08 0x0180 0x040c 0x0000 4 0 #define MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x0180 0x040c 0x0000 5 0 #define MX6UL_PAD_NAND_DATA00__ECSPI4_RDY 0x0180 0x040c 0x0000 8 0 #define MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0184 0x0410 0x0000 0 0 #define MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x0184 0x0410 0x0680 1 2 #define MX6UL_PAD_NAND_DATA01__QSPI_B_DQS 0x0184 0x0410 0x0000 2 0 -#define MX6UL_PAD_NAND_DATA01__KPP_COL01 0x0184 0x0410 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA01__KPP_COL01 0x0184 0x0410 0x05c8 3 1 #define MX6UL_PAD_NAND_DATA01__EIM_AD09 0x0184 0x0410 0x0000 4 0 #define MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x0184 0x0410 0x0000 5 0 #define MX6UL_PAD_NAND_DATA01__ECSPI4_SS1 0x0184 0x0410 0x0000 8 0 #define MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0188 0x0414 0x0000 0 0 #define MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x0188 0x0414 0x0684 1 1 #define MX6UL_PAD_NAND_DATA02__QSPI_B_DATA00 0x0188 0x0414 0x0000 2 0 -#define MX6UL_PAD_NAND_DATA02__KPP_ROW02 0x0188 0x0414 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA02__KPP_ROW02 0x0188 0x0414 0x05d8 3 1 #define MX6UL_PAD_NAND_DATA02__EIM_AD10 0x0188 0x0414 0x0000 4 0 #define MX6UL_PAD_NAND_DATA02__GPIO4_IO04 0x0188 0x0414 0x0000 5 0 #define MX6UL_PAD_NAND_DATA02__ECSPI4_SS2 0x0188 0x0414 0x0000 8 0 #define MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x018c 0x0418 0x0000 0 0 #define MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x018c 0x0418 0x0688 1 2 #define MX6UL_PAD_NAND_DATA03__QSPI_B_DATA01 0x018c 0x0418 0x0000 2 0 -#define MX6UL_PAD_NAND_DATA03__KPP_COL02 0x018c 0x0418 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA03__KPP_COL02 0x018c 0x0418 0x05cc 3 1 #define MX6UL_PAD_NAND_DATA03__EIM_AD11 0x018c 0x0418 0x0000 4 0 #define MX6UL_PAD_NAND_DATA03__GPIO4_IO05 0x018c 0x0418 0x0000 5 0 #define MX6UL_PAD_NAND_DATA03__ECSPI4_SS3 0x018c 0x0418 0x0000 8 0 @@ -726,7 +751,7 @@ #define MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x019c 0x0428 0x0000 0 0 #define MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x019c 0x0428 0x0698 1 1 #define MX6UL_PAD_NAND_DATA07__QSPI_A_SS1_B 0x019c 0x0428 0x0000 2 0 -#define MX6UL_PAD_NAND_DATA07__ECSPI4_SS0 0x019c 0x0428 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA07__ECSPI4_SS0 0x019c 0x0428 0x0570 3 1 #define MX6UL_PAD_NAND_DATA07__EIM_AD15 0x019c 0x0428 0x0000 4 0 #define MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x019c 0x0428 0x0000 5 0 #define MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x019c 0x0428 0x0628 8 5 @@ -748,7 +773,7 @@ #define MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x01a8 0x0434 0x0000 0 0 #define MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x01a8 0x0434 0x0000 1 0 #define MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x01a8 0x0434 0x0000 2 0 -#define MX6UL_PAD_NAND_READY_B__ECSPI3_SS0 0x01a8 0x0434 0x0000 3 0 +#define MX6UL_PAD_NAND_READY_B__ECSPI3_SS0 0x01a8 0x0434 0x0560 3 1 #define MX6UL_PAD_NAND_READY_B__EIM_CS1_B 0x01a8 0x0434 0x0000 4 0 #define MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x01a8 0x0434 0x0000 5 0 #define MX6UL_PAD_NAND_READY_B__UART3_DCE_TX 0x01a8 0x0434 0x0000 8 0 @@ -783,7 +808,7 @@ #define MX6UL_PAD_NAND_DQS__PWM5_OUT 0x01b8 0x0444 0x0000 3 0 #define MX6UL_PAD_NAND_DQS__EIM_WAIT 0x01b8 0x0444 0x0000 4 0 #define MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x01b8 0x0444 0x0000 5 0 -#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01 0x01b8 0x0444 0x0000 6 0 +#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01 0x01b8 0x0444 0x0614 6 1 #define MX6UL_PAD_NAND_DQS__SPDIF_EXT_CLK 0x01b8 0x0444 0x061c 8 1 #define MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x01bc 0x0448 0x0000 0 0 #define MX6UL_PAD_SD1_CMD__GPT2_COMPARE1 0x01bc 0x0448 0x0000 1 0 @@ -791,11 +816,11 @@ #define MX6UL_PAD_SD1_CMD__SPDIF_OUT 0x01bc 0x0448 0x0000 3 0 #define MX6UL_PAD_SD1_CMD__EIM_ADDR19 0x01bc 0x0448 0x0000 4 0 #define MX6UL_PAD_SD1_CMD__GPIO2_IO16 0x01bc 0x0448 0x0000 5 0 -#define MX6UL_PAD_SD1_CMD__SDMA_EXT_EVENT00 0x01bc 0x0448 0x0000 6 0 +#define MX6UL_PAD_SD1_CMD__SDMA_EXT_EVENT00 0x01bc 0x0448 0x0610 6 2 #define MX6UL_PAD_SD1_CMD__USB_OTG1_PWR 0x01bc 0x0448 0x0000 8 0 #define MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x01c0 0x044c 0x0000 0 0 #define MX6UL_PAD_SD1_CLK__GPT2_COMPARE2 0x01c0 0x044c 0x0000 1 0 -#define MX6UL_PAD_SD1_CLK__SAI2_MCLK 0x01c0 0x044c 0x0000 2 0 +#define MX6UL_PAD_SD1_CLK__SAI2_MCLK 0x01c0 0x044c 0x05f0 2 1 #define MX6UL_PAD_SD1_CLK__SPDIF_IN 0x01c0 0x044c 0x0618 3 3 #define MX6UL_PAD_SD1_CLK__EIM_ADDR20 0x01c0 0x044c 0x0000 4 0 #define MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x01c0 0x044c 0x0000 5 0 @@ -878,10 +903,10 @@ #define MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x01e8 0x0474 0x04c8 0 0 #define MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x01e8 0x0474 0x0680 1 0 #define MX6UL_PAD_CSI_DATA01__SIM1_PORT1_SVEN 0x01e8 0x0474 0x0000 2 0 -#define MX6UL_PAD_CSI_DATA01__ECSPI2_SS0 0x01e8 0x0474 0x0000 3 0 +#define MX6UL_PAD_CSI_DATA01__ECSPI2_SS0 0x01e8 0x0474 0x0550 3 0 #define MX6UL_PAD_CSI_DATA01__EIM_AD01 0x01e8 0x0474 0x0000 4 0 #define MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x01e8 0x0474 0x0000 5 0 -#define MX6UL_PAD_CSI_DATA01__SAI1_MCLK 0x01e8 0x0474 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA01__SAI1_MCLK 0x01e8 0x0474 0x05e0 6 0 #define MX6UL_PAD_CSI_DATA01__UART5_DCE_RX 0x01e8 0x0474 0x0644 8 1 #define MX6UL_PAD_CSI_DATA01__UART5_DTE_TX 0x01e8 0x0474 0x0000 8 0 #define MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x01ec 0x0478 0x04d8 0 1 @@ -913,7 +938,7 @@ #define MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x01f8 0x0484 0x04e0 0 1 #define MX6UL_PAD_CSI_DATA05__USDHC2_DATA5 0x01f8 0x0484 0x0690 1 2 #define MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B 0x01f8 0x0484 0x0000 2 0 -#define MX6UL_PAD_CSI_DATA05__ECSPI1_SS0 0x01f8 0x0484 0x0000 3 0 +#define MX6UL_PAD_CSI_DATA05__ECSPI1_SS0 0x01f8 0x0484 0x0540 3 1 #define MX6UL_PAD_CSI_DATA05__EIM_AD05 0x01f8 0x0484 0x0000 4 0 #define MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x01f8 0x0484 0x0000 5 0 #define MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x01f8 0x0484 0x05e8 6 1 @@ -924,7 +949,7 @@ #define MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x01fc 0x0488 0x053c 3 1 #define MX6UL_PAD_CSI_DATA06__EIM_AD06 0x01fc 0x0488 0x0000 4 0 #define MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x01fc 0x0488 0x0000 5 0 -#define MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x01fc 0x0488 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x01fc 0x0488 0x05e4 6 1 #define MX6UL_PAD_CSI_DATA06__USDHC1_RESET_B 0x01fc 0x0488 0x0000 8 0 #define MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x0200 0x048c 0x04e8 0 1 #define MX6UL_PAD_CSI_DATA07__USDHC2_DATA7 0x0200 0x048c 0x0698 1 2 diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index 65111f9843f4e..f678d18ad44ab 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -70,8 +70,8 @@ stdout-path = &uart1; }; - memory { - reg = <0 0>; /* will be filled by U-Boot */ + memory@80000000 { + reg = <0x80000000 0>; /* will be filled by U-Boot */ }; clocks { diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 5d6c3ba36cd15..1241972b16ba5 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -22,7 +22,7 @@ * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; reg = <0 0>; }; + memory { device_type = "memory"; }; aliases { ethernet0 = &fec1; @@ -86,15 +86,10 @@ <&clks IMX6UL_CA7_SECONDARY_SEL>, <&clks IMX6UL_CLK_STEP>, <&clks IMX6UL_CLK_PLL1_SW>, - <&clks IMX6UL_CLK_PLL1_SYS>, - <&clks IMX6UL_PLL1_BYPASS>, - <&clks IMX6UL_CLK_PLL1>, - <&clks IMX6UL_PLL1_BYPASS_SRC>, - <&clks IMX6UL_CLK_OSC>; + <&clks IMX6UL_CLK_PLL1_SYS>; clock-names = "arm", "pll2_bus", "pll2_pfd2_396m", "secondary_sel", "step", "pll1_sw", - "pll1_sys", "pll1_bypass", "pll1", - "pll1_bypass_src", "osc"; + "pll1_sys"; arm-supply = <®_arm>; soc-supply = <®_soc>; }; @@ -102,14 +97,26 @@ intc: interrupt-controller@a01000 { compatible = "arm,gic-400", "arm,cortex-a7-gic"; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; #interrupt-cells = <3>; interrupt-controller; + interrupt-parent = <&intc>; reg = <0x00a01000 0x1000>, <0x00a02000 0x2000>, <0x00a04000 0x2000>, <0x00a06000 0x2000>; }; + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&intc>; + status = "disabled"; + }; + ckil: clock-cli { compatible = "fixed-clock"; #clock-cells = <0>; @@ -924,6 +931,14 @@ status = "disabled"; }; + wdog3: wdog@21e4000 { + compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; + reg = <0x021e4000 0x4000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_WDOG3>; + status = "disabled"; + }; + uart2: serial@21e8000 { compatible = "fsl,imx6ul-uart", "fsl,imx6q-uart"; diff --git a/arch/arm/boot/dts/imx6ull-14x14-evk.dts b/arch/arm/boot/dts/imx6ull-14x14-evk.dts index 4741871434dd6..30ef60344af36 100644 --- a/arch/arm/boot/dts/imx6ull-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ull-14x14-evk.dts @@ -39,7 +39,10 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "imx6ul-14x14-evk.dts" +/dts-v1/; + +#include "imx6ull.dtsi" +#include "imx6ul-14x14-evk.dtsi" / { model = "Freescale i.MX6 UlltraLite 14x14 EVK Board"; diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts new file mode 100644 index 0000000000000..08669a18349e2 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2018 Toradex AG + */ + +/dts-v1/; + +#include "imx6ull-colibri-nonwifi.dtsi" +#include "imx6ull-colibri-eval-v3.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 256MB on Colibri Evaluation Board V3"; + compatible = "toradex,colibri-imx6ull-eval", "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi new file mode 100644 index 0000000000000..006690ea98c0f --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017 Toradex AG + */ + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* fixed crystal dedicated to mcp2515 */ + clk16m: clk16m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + }; + + panel: panel { + compatible = "edt,et057090dhu"; + backlight = <&bl>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; +}; + +&adc1 { + status = "okay"; +}; + +&bl { + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + power-supply = <®_3v3>; + pwms = <&pwm4 0 5000000 1>; + status = "okay"; +}; + +&ecspi1 { + status = "okay"; + + mcp2515: can@0 { + compatible = "microchip,mcp2515"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_int>; + reg = <0>; + clocks = <&clk16m>; + interrupt-parent = <&gpio2>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <10000000>; + vdd-supply = <®_3v3>; + xceiver-supply = <®_5v0>; + status = "okay"; + }; +}; + +&i2c1 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + m41t0m6: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +&lcdif { + status = "okay"; + + port { + lcdif_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +/* PWM <A> */ +&pwm4 { + status = "okay"; +}; + +/* PWM <B> */ +&pwm5 { + status = "okay"; +}; + +/* PWM <C> */ +&pwm6 { + status = "okay"; +}; + +/* PWM <D> */ +&pwm7 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>; + no-1-8-v; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + disable-wp; + wakeup-source; + keep-power-in-suspend; + vmmc-supply = <®_3v3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi new file mode 100644 index 0000000000000..10ab4697950f5 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2018 Toradex AG + */ + +#include "imx6ull-colibri.dtsi" + +/ { + memory@80000000 { + reg = <0x80000000 0x10000000>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 + &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio6>; +}; + +&iomuxc_snvs { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2 &pinctrl_snvs_gpio3>; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts new file mode 100644 index 0000000000000..df72ce1ae2cba --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2018 Toradex AG + */ + +/dts-v1/; + +#include "imx6ull-colibri-wifi.dtsi" +#include "imx6ull-colibri-eval-v3.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 512MB on Colibri Evaluation Board V3"; + compatible = "toradex,colibri-imx6ull-wifi-eval", "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi new file mode 100644 index 0000000000000..3dffbcd50bf68 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2018 Toradex AG + */ + +#include "imx6ull-colibri.dtsi" + +/ { + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + wifi_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_wifi_pdn>; + reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + }; +}; + +&cpu0 { + clock-frequency = <792000000>; + operating-points = < + /* kHz uV */ + 792000 1225000 + 528000 1175000 + 396000 1025000 + 198000 950000 + >; + fsl,soc-operating-points = < + /* KHz uV */ + 792000 1175000 + 528000 1175000 + 396000 1175000 + 198000 1175000 + >; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 + &pinctrl_gpio4 &pinctrl_gpio5>; + +}; + +&iomuxc_snvs { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2>; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>; + assigned-clock-rates = <0>, <198000000>; + cap-power-off-card; + keep-power-in-suspend; + mmc-pwrseq = <&wifi_pwrseq>; + no-1-8-v; + non-removable; + vmmc-supply = <®_module_3v3>; + wakeup-source; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi new file mode 100644 index 0000000000000..6c63a73846114 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -0,0 +1,553 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2018 Toradex AG + */ + +#include "imx6ull.dtsi" + +/ { + aliases { + ethernet0 = &fec2; + ethernet1 = &fec1; + }; + + bl: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_bl_on>; + enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_module_3v3_avdd: regulator-module-3v3-avdd { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-name = "+V3.3_AVDD_AUDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-gpio"; + gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_reg_sd>; + regulator-always-on; + regulator-name = "+V3.3_1.8_SD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + states = <1800000 0x1 3300000 0x0>; + vin-supply = <®_module_3v3>; + }; +}; + +&adc1 { + num-channels = <10>; + vref-supply = <®_module_3v3_avdd>; +}; + +/* Colibri SPI */ +&ecspi1 { + cs-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + max-speed = <100>; + reg = <2>; + }; + }; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + scl-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; +}; + +&i2c2 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; + scl-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + status = "okay"; + + ad7879@2c { + compatible = "adi,ad7879-1"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_ad7879_int>; + reg = <0x2c>; + interrupt-parent = <&gpio5>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + touchscreen-max-pressure = <4096>; + adi,resistance-plate-x = <120>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,acquisition-time = /bits/ 8 <1>; + adi,median-filter-size = /bits/ 8 <2>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + #pwm-cells = <3>; +}; + +&pwm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm5>; + #pwm-cells = <3>; +}; + +&pwm6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm6>; + #pwm-cells = <3>; +}; + +&pwm7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm7>; + #pwm-cells = <3>; +}; + +&sdma { + status = "okay"; +}; + +&snvs_pwrkey { + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>; + uart-has-rtscts; + fsl,dte-mode; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + fsl,dte-mode; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + fsl,dte-mode; +}; + +&usbotg1 { + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; +}; + +&usbotg2 { + dr_mode = "host"; +}; + +&usdhc1 { + assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>; + assigned-clock-rates = <0>, <198000000>; +}; + +&iomuxc { + pinctrl_can_int: canint-grp { + fsl,pins = < + MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0X14 /* SODIMM 73 */ + >; + }; + + pinctrl_enet2: enet2-grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + >; + }; + + pinctrl_ecspi1_cs: ecspi1-cs-grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x000a0 + >; + }; + + pinctrl_ecspi1: ecspi1-grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x000a0 + MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x000a0 + MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x100a0 + >; + }; + + pinctrl_flexcan2: flexcan2-grp { + fsl,pins = < + MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_gpio_bl_on: gpio-bl-on-grp { + fsl,pins = < + MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x000a0 + >; + }; + + pinctrl_gpio1: gpio1-grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x74 /* SODIMM 55 */ + MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x74 /* SODIMM 63 */ + MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0X14 /* SODIMM 77 */ + MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x14 /* SODIMM 99 */ + MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x14 /* SODIMM 133 */ + MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x14 /* SODIMM 135 */ + MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x14 /* SODIMM 100 */ + MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x14 /* SODIMM 102 */ + MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x14 /* SODIMM 104 */ + MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x14 /* SODIMM 186 */ + >; + }; + + pinctrl_gpio2: gpio2-grp { /* Camera */ + fsl,pins = < + MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x74 /* SODIMM 69 */ + MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x14 /* SODIMM 75 */ + MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x14 /* SODIMM 85 */ + MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0x14 /* SODIMM 96 */ + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x14 /* SODIMM 98 */ + >; + }; + + pinctrl_gpio3: gpio3-grp { /* CAN2 */ + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x14 /* SODIMM 178 */ + MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x14 /* SODIMM 188 */ + >; + }; + + pinctrl_gpio4: gpio4-grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x74 /* SODIMM 65 */ + >; + }; + + pinctrl_gpio5: gpio5-grp { /* ATMEL MXT TOUCH */ + fsl,pins = < + MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x74 /* SODIMM 106 */ + >; + }; + + pinctrl_gpio6: gpio6-grp { /* Wifi pins */ + fsl,pins = < + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x14 /* SODIMM 89 */ + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x14 /* SODIMM 79 */ + MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x14 /* SODIMM 81 */ + MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x14 /* SODIMM 97 */ + MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x14 /* SODIMM 101 */ + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x14 /* SODIMM 103 */ + MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x14 /* SODIMM 94 */ + >; + }; + + pinctrl_gpmi_nand: gpmi-nand-grp { + fsl,pins = < + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x100a9 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x100a9 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x100a9 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x100a9 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x100a9 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x100a9 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x100a9 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x100a9 + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x100a9 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x100a9 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x100a9 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x100a9 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x100a9 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x100a9 + >; + }; + + pinctrl_i2c1: i2c1-grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c1_gpio: i2c1-gpio-grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2-grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c2_gpio: i2c2-gpio-grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001b8b0 + >; + }; + + pinctrl_lcdif_dat: lcdif-dat-grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x00079 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x00079 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x00079 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x00079 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x00079 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x00079 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x00079 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x00079 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x00079 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x00079 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x00079 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x00079 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x00079 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x00079 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x00079 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x00079 + >; + }; + + pinctrl_lcdif_ctrl: lcdif-ctrl-grp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x00079 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x00079 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x00079 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x00079 + >; + }; + + pinctrl_pwm4: pwm4-grp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__PWM4_OUT 0x00079 + >; + }; + + pinctrl_pwm5: pwm5-grp { + fsl,pins = < + MX6UL_PAD_NAND_DQS__PWM5_OUT 0x00079 + >; + }; + + pinctrl_pwm6: pwm6-grp { + fsl,pins = < + MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00079 + >; + }; + + pinctrl_pwm7: pwm7-grp { + fsl,pins = < + MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00079 + >; + }; + + pinctrl_uart1: uart1-grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x1b0b1 + MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS 0x1b0b1 + MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart1_ctrl1: uart1-ctrl1-grp { /* Additional DTR, DCD */ + fsl,pins = < + MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x1b0b1 /* DCD */ + MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x1b0b1 /* DSR */ + MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x1b0b1 /* DTR */ + MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x1b0b1 /* RI */ + >; + }; + + pinctrl_uart2: uart2-grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x1b0b1 + MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS 0x1b0b1 + MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x1b0b1 + >; + }; + pinctrl_uart5: uart5-grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX 0x1b0b1 + MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX 0x1b0b1 + >; + }; + + pinctrl_usbh_reg: gpio-usbh-reg { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x1b0b1 /* SODIMM 129 USBH PEN */ + >; + }; + + pinctrl_usdhc1: usdhc1-grp { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17059 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170b9 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170f9 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2: usdhc2-grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059 + MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059 + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17059 + + MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x14 + >; + }; +}; + +&iomuxc_snvs { + pinctrl_snvs_gpio1: snvs-gpio1-grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x14 /* SODIMM 93 */ + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x14 /* SODIMM 95 */ + MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x74 /* SODIMM 105 */ + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x14 /* SODIMM 131 USBH OC */ + MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x74 /* SODIMM 138 */ + >; + }; + + pinctrl_snvs_gpio2: snvs-gpio2-grp { /* ATMEL MXT TOUCH */ + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x74 /* SODIMM 107 */ + >; + }; + + pinctrl_snvs_gpio3: snvs-gpio3-grp { /* Wifi pins */ + fsl,pins = < + MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x14 /* SODIMM 127 */ + >; + }; + + pinctrl_snvs_ad7879_int: snvs-ad7879-int-grp { /* TOUCH Interrupt */ + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 + >; + }; + + pinctrl_snvs_reg_sd: snvs-reg-sd-grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x4001b8b0 + >; + }; + + pinctrl_snvs_usbc_det: snvs-usbc-det-grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 + >; + }; + + pinctrl_snvs_gpiokeys: snvs-gpiokeys-grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x130b0 + >; + }; + + pinctrl_snvs_usdhc1_cd: snvs-usdhc1-cd-grp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* CD */ + >; + }; + + pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp { + fsl,pins = < + MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x14 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h b/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h new file mode 100644 index 0000000000000..f6fb6783c1933 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Copyright (C) 2017 NXP + */ + +#ifndef __DTS_IMX6ULL_PINFUNC_SNVS_H +#define __DTS_IMX6ULL_PINFUNC_SNVS_H +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x0000 0x0044 0x0000 0x5 0x0 +#define MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x0004 0x0048 0x0000 0x5 0x0 +#define MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0008 0x004C 0x0000 0x5 0x0 +#define MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x000C 0x0050 0x0000 0x5 0x0 +#define MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0010 0x0054 0x0000 0x5 0x0 +#define MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0014 0x0058 0x0000 0x5 0x0 +#define MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0018 0x005C 0x0000 0x5 0x0 +#define MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x001C 0x0060 0x0000 0x5 0x0 +#define MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0020 0x0064 0x0000 0x5 0x0 +#define MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0024 0x0068 0x0000 0x5 0x0 +#define MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x0028 0x006C 0x0000 0x5 0x0 +#define MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x002C 0x0070 0x0000 0x5 0x0 + +#endif /* __DTS_IMX6ULL_PINFUNC_SNVS_H */ diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi index 0c182917b863c..571ddd71cdba8 100644 --- a/arch/arm/boot/dts/imx6ull.dtsi +++ b/arch/arm/boot/dts/imx6ull.dtsi @@ -41,3 +41,35 @@ #include "imx6ul.dtsi" #include "imx6ull-pinfunc.h" +#include "imx6ull-pinfunc-snvs.h" + +/* Delete UART8 in AIPS-1 (i.MX6UL specific) */ +/delete-node/ &uart8; + +/ { + soc { + aips3: aips-bus@2200000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02200000 0x100000>; + ranges; + + iomuxc_snvs: iomuxc-snvs@2290000 { + compatible = "fsl,imx6ull-iomuxc-snvs"; + reg = <0x02290000 0x4000>; + }; + + uart8: serial@2288000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x02288000 0x4000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_UART8_IPG>, + <&clks IMX6UL_CLK_UART8_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts index ae45af1ad062a..7f645683f53b0 100644 --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts @@ -18,7 +18,7 @@ model = "CompuLab CL-SOM-iMX7"; compatible = "compulab,cl-som-imx7", "fsl,imx7d"; - memory { + memory@80000000 { reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */ }; @@ -213,37 +213,37 @@ &iomuxc { pinctrl_enet1: enet1grp { fsl,pins = < - MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 - MX7D_PAD_SD2_WP__ENET1_MDC 0x3 - MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 - MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 - MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 - MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 - MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 - MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 - MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 - MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 - MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 - MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 - MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 - MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 + MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x30 + MX7D_PAD_SD2_WP__ENET1_MDC 0x30 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x11 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x11 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x11 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x11 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x11 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x11 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x11 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x11 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x11 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x11 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x11 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x11 >; }; pinctrl_enet2: enet2grp { fsl,pins = < - MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1 - MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1 - MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1 - MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1 - MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1 - MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1 - MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1 - MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1 - MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1 - MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1 - MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1 - MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1 + MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x11 + MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x11 + MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x11 + MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x11 + MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x11 + MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x11 + MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x11 + MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x11 + MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x11 + MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x11 + MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x11 + MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x11 >; }; diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi index 9b63b9c89e4b6..04d24ee17b142 100644 --- a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi +++ b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi @@ -7,7 +7,7 @@ #include "imx7-colibri.dtsi" / { - memory { + memory@80000000 { reg = <0x80000000 0x40000000>; }; }; diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi index 6f2bb70c1fbdb..d9f8fb69511b6 100644 --- a/arch/arm/boot/dts/imx7d-colibri.dtsi +++ b/arch/arm/boot/dts/imx7d-colibri.dtsi @@ -44,7 +44,7 @@ #include "imx7-colibri.dtsi" / { - memory { + memory@80000000 { reg = <0x80000000 0x20000000>; }; }; diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index 2b05898bb3f68..52167298984d7 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -53,7 +53,7 @@ t_lcd = &t_lcd; }; - memory { + memory@80000000 { reg = <0x80000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi index e307462a48ec6..21973eb556719 100644 --- a/arch/arm/boot/dts/imx7d-pico.dtsi +++ b/arch/arm/boot/dts/imx7d-pico.dtsi @@ -48,7 +48,7 @@ model = "Technexion Pico i.MX7D Board"; compatible = "technexion,imx7d-pico", "fsl,imx7d"; - memory { + memory@80000000 { reg = <0x80000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index e7d2db839d707..5d6a08be397f2 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -48,7 +48,7 @@ model = "Freescale i.MX7 SabreSD Board"; compatible = "fsl,imx7d-sdb", "fsl,imx7d"; - memory { + memory@80000000 { reg = <0x80000000 0x80000000>; }; @@ -336,6 +336,11 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + mpl3115@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + }; }; &i2c3 { diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi index b81013455b21c..fe8344cee8641 100644 --- a/arch/arm/boot/dts/imx7s-colibri.dtsi +++ b/arch/arm/boot/dts/imx7s-colibri.dtsi @@ -44,7 +44,7 @@ #include "imx7-colibri.dtsi" / { - memory { + memory@80000000 { reg = <0x80000000 0x10000000>; }; }; diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index 9bdf121f7e435..8a30b148534d0 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -50,7 +50,7 @@ model = "Warp i.MX7 Board"; compatible = "warp,imx7s-warp", "fsl,imx7s"; - memory { + memory@80000000 { reg = <0x80000000 0x20000000>; }; @@ -271,6 +271,15 @@ status = "okay"; }; +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + fsl,dte-mode; + status = "okay"; +}; + &usbotg1 { dr_mode = "peripheral"; status = "okay"; @@ -379,6 +388,13 @@ >; }; + pinctrl_uart6: uart6grp { + fsl,pins = < + MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX 0x79 + MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX 0x79 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX7D_PAD_SD1_CMD__SD1_CMD 0x59 diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 9aa2bb998552b..4d42335c0dee9 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -58,7 +58,7 @@ * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; reg = <0 0>; }; + memory { device_type = "memory"; }; aliases { gpio0 = &gpio1; @@ -130,6 +130,12 @@ #phy-cells = <0>; }; + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupt-parent = <&gpc>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>; + }; replicator { /* @@ -499,6 +505,14 @@ status = "disabled"; }; + kpp: kpp@30320000 { + compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp"; + reg = <0x30320000 0x10000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_KPP_ROOT_CLK>; + status = "disabled"; + }; + iomuxc: iomuxc@30330000 { compatible = "fsl,imx7d-iomuxc"; reg = <0x30330000 0x10000>; @@ -511,9 +525,29 @@ }; ocotp: ocotp-ctrl@30350000 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,imx7d-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clks IMX7D_OCOTP_CLK>; + + tempmon_calib: calib@3c { + reg = <0x3c 0x4>; + }; + + tempmon_temp_grade: temp-grade@10 { + reg = <0x10 0x4>; + }; + }; + + tempmon: tempmon { + compatible = "fsl,imx7d-tempmon"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon =<&anatop>; + nvmem-cells = <&tempmon_calib>, + <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; }; anatop: anatop@30360000 { @@ -551,6 +585,8 @@ offset = <0x34>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_SNVS_CLK>; + clock-names = "snvs-rtc"; }; snvs_poweroff: snvs-poweroff { @@ -708,118 +744,156 @@ reg = <0x30800000 0x400000>; ranges; - ecspi1: ecspi@30820000 { + spba-bus@30800000 { + compatible = "fsl,spba-bus", "simple-bus"; #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; - reg = <0x30820000 0x10000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>, - <&clks IMX7D_ECSPI1_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; + #size-cells = <1>; + reg = <0x30800000 0x100000>; + ranges; - ecspi2: ecspi@30830000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; - reg = <0x30830000 0x10000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>, - <&clks IMX7D_ECSPI2_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; + ecspi1: ecspi@30820000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; + reg = <0x30820000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>, + <&clks IMX7D_ECSPI1_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; - ecspi3: ecspi@30840000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; - reg = <0x30840000 0x10000>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>, - <&clks IMX7D_ECSPI3_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; + ecspi2: ecspi@30830000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; + reg = <0x30830000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>, + <&clks IMX7D_ECSPI2_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; - uart1: serial@30860000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart"; - reg = <0x30860000 0x10000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART1_ROOT_CLK>, - <&clks IMX7D_UART1_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; + ecspi3: ecspi@30840000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; + reg = <0x30840000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>, + <&clks IMX7D_ECSPI3_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; - uart2: serial@30890000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart"; - reg = <0x30890000 0x10000>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART2_ROOT_CLK>, - <&clks IMX7D_UART2_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; + uart1: serial@30860000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART1_ROOT_CLK>, + <&clks IMX7D_UART1_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; - uart3: serial@30880000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart"; - reg = <0x30880000 0x10000>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART3_ROOT_CLK>, - <&clks IMX7D_UART3_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; + uart2: serial@30890000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART2_ROOT_CLK>, + <&clks IMX7D_UART2_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; - sai1: sai@308a0000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai"; - reg = <0x308a0000 0x10000>; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_SAI1_IPG_CLK>, - <&clks IMX7D_SAI1_ROOT_CLK>, - <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "rx", "tx"; - dmas = <&sdma 8 24 0>, <&sdma 9 24 0>; - status = "disabled"; - }; + uart3: serial@30880000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART3_ROOT_CLK>, + <&clks IMX7D_UART3_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; - sai2: sai@308b0000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai"; - reg = <0x308b0000 0x10000>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_SAI2_IPG_CLK>, - <&clks IMX7D_SAI2_ROOT_CLK>, - <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "rx", "tx"; - dmas = <&sdma 10 24 0>, <&sdma 11 24 0>; - status = "disabled"; + sai1: sai@308a0000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai"; + reg = <0x308a0000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_SAI1_IPG_CLK>, + <&clks IMX7D_SAI1_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 8 24 0>, <&sdma 9 24 0>; + status = "disabled"; + }; + + sai2: sai@308b0000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai"; + reg = <0x308b0000 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_SAI2_IPG_CLK>, + <&clks IMX7D_SAI2_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 10 24 0>, <&sdma 11 24 0>; + status = "disabled"; + }; + + sai3: sai@308c0000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai"; + reg = <0x308c0000 0x10000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_SAI3_IPG_CLK>, + <&clks IMX7D_SAI3_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 12 24 0>, <&sdma 13 24 0>; + status = "disabled"; + }; }; - sai3: sai@308c0000 { - #sound-dai-cells = <0>; - compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai"; - reg = <0x308c0000 0x10000>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_SAI3_IPG_CLK>, - <&clks IMX7D_SAI3_ROOT_CLK>, - <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>; - clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "rx", "tx"; - dmas = <&sdma 12 24 0>, <&sdma 13 24 0>; - status = "disabled"; + crypto: caam@30900000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30900000 0x40000>; + ranges = <0 0x30900000 0x40000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CAAM_CLK>, + <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>; + clock-names = "ipg", "aclk"; + + sec_jr0: jr0@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr1@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr1@3000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + }; }; flexcan1: can@30a00000 { diff --git a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi index 5e0e7d232161e..f7592155a7404 100644 --- a/arch/arm/boot/dts/keystone-k2e-clocks.dtsi +++ b/arch/arm/boot/dts/keystone-k2e-clocks.dtsi @@ -42,7 +42,7 @@ clocks { domain-id = <0>; }; - clkhyperlink0: clkhyperlink02350030 { + clkhyperlink0: clkhyperlink0@2350030 { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk12>; diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi index 0bcd3f8a9c457..085e7326ea8e3 100644 --- a/arch/arm/boot/dts/keystone-k2e.dtsi +++ b/arch/arm/boot/dts/keystone-k2e.dtsi @@ -109,11 +109,14 @@ }; }; - dspgpio0: keystone_dsp_gpio@2620240 { - compatible = "ti,keystone-dsp-gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio,syscon-dev = <&devctrl 0x240>; + devctrl: device-state-control@2620000 { + dspgpio0: keystone_dsp_gpio@240 { + compatible = "ti,keystone-dsp-gpio"; + reg = <0x240 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x240>; + }; }; dsp0: dsp@10800000 { diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index fd061718dc0a4..da78c00344275 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -69,6 +69,24 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; }; + usbphy { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-bus"; + + usb0_phy: usb-phy@0 { + compatible = "usb-nop-xceiv"; + reg = <0>; + status = "disabled"; + }; + + usb1_phy: usb-phy@1 { + compatible = "usb-nop-xceiv"; + reg = <1>; + status = "disabled"; + }; + }; + soc0: soc@0 { #address-cells = <1>; #size-cells = <1>; @@ -97,8 +115,28 @@ }; devctrl: device-state-control@2620000 { - compatible = "ti,keystone-devctrl", "syscon"; + compatible = "ti,keystone-devctrl", "syscon", "simple-mfd"; reg = <0x02620000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x02620000 0x1000>; + + kirq0: keystone_irq@2a0 { + compatible = "ti,keystone-irq"; + reg = <0x2a0 0x10>; + interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <1>; + ti,syscon-dev = <&devctrl 0x2a0>; + }; + + dspgpio0: keystone_dsp_gpio@240 { + compatible = "ti,keystone-dsp-gpio"; + reg = <0x240 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x240>; + }; }; uart0: serial@2530c00 { @@ -113,7 +151,7 @@ status = "disabled"; }; - uart1: serial@02531000 { + uart1: serial@2531000 { compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; @@ -125,7 +163,7 @@ status = "disabled"; }; - uart2: serial@02531400 { + uart2: serial@2531400 { compatible = "ti,da830-uart", "ns16550a"; current-speed = <115200>; reg-shift = <2>; @@ -188,21 +226,6 @@ status = "disabled"; }; - kirq0: keystone_irq@26202a0 { - compatible = "ti,keystone-irq"; - interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>; - interrupt-controller; - #interrupt-cells = <1>; - ti,syscon-dev = <&devctrl 0x2a0>; - }; - - dspgpio0: keystone_dsp_gpio@2620240 { - compatible = "ti,keystone-dsp-gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio,syscon-dev = <&devctrl 0x240>; - }; - dsp0: dsp@10800000 { compatible = "ti,k2g-dsp"; reg = <0x10800000 0x00100000>, @@ -460,11 +483,6 @@ status = "disabled"; }; - usb0_phy: usb-phy@0 { - compatible = "usb-nop-xceiv"; - status = "disabled"; - }; - keystone_usb0: keystone-dwc3@2680000 { compatible = "ti,keystone-dwc3"; #address-cells = <1>; @@ -488,11 +506,6 @@ }; }; - usb1_phy: usb-phy@1 { - compatible = "usb-nop-xceiv"; - status = "disabled"; - }; - keystone_usb1: keystone-dwc3@2580000 { compatible = "ti,keystone-dwc3"; #address-cells = <1>; @@ -583,5 +596,18 @@ power-domains = <&k2g_pds 0x0013>; clocks = <&k2g_clks 0x0013 0>; }; + + wdt: wdt@02250000 { + compatible = "ti,keystone-wdt", "ti,davinci-wdt"; + reg = <0x02250000 0x80>; + power-domains = <&k2g_pds 0x22>; + clocks = <&k2g_clks 0x22 0>; + }; + + emif: emif@21010000 { + compatible = "ti,emif-keystone"; + reg = <0x21010000 0x200>; + interrupts = <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>; + }; }; }; diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi index ed59474522cb8..ca0f198ba627e 100644 --- a/arch/arm/boot/dts/keystone-k2hk.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk.dtsi @@ -87,60 +87,70 @@ }; }; - dspgpio0: keystone_dsp_gpio@2620240 { - compatible = "ti,keystone-dsp-gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio,syscon-dev = <&devctrl 0x240>; - }; + devctrl: device-state-control@2620000 { + dspgpio0: keystone_dsp_gpio@240 { + compatible = "ti,keystone-dsp-gpio"; + reg = <0x240 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x240>; + }; - dspgpio1: keystone_dsp_gpio@2620244 { - compatible = "ti,keystone-dsp-gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio,syscon-dev = <&devctrl 0x244>; - }; + dspgpio1: keystone_dsp_gpio@244 { + compatible = "ti,keystone-dsp-gpio"; + reg = <0x244 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x244>; + }; - dspgpio2: keystone_dsp_gpio@2620248 { - compatible = "ti,keystone-dsp-gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio,syscon-dev = <&devctrl 0x248>; - }; + dspgpio2: keystone_dsp_gpio@248 { + compatible = "ti,keystone-dsp-gpio"; + reg = <0x248 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x248>; + }; - dspgpio3: keystone_dsp_gpio@262024c { - compatible = "ti,keystone-dsp-gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio,syscon-dev = <&devctrl 0x24c>; - }; + dspgpio3: keystone_dsp_gpio@24c { + compatible = "ti,keystone-dsp-gpio"; + reg = <0x24c 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x24c>; + }; - dspgpio4: keystone_dsp_gpio@2620250 { - compatible = "ti,keystone-dsp-gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio,syscon-dev = <&devctrl 0x250>; - }; + dspgpio4: keystone_dsp_gpio@250 { + compatible = "ti,keystone-dsp-gpio"; + reg = <0x250 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x250>; + }; - dspgpio5: keystone_dsp_gpio@2620254 { - compatible = "ti,keystone-dsp-gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio,syscon-dev = <&devctrl 0x254>; - }; + dspgpio5: keystone_dsp_gpio@254 { + compatible = "ti,keystone-dsp-gpio"; + reg = <0x254 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x254>; + }; - dspgpio6: keystone_dsp_gpio@2620258 { - compatible = "ti,keystone-dsp-gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio,syscon-dev = <&devctrl 0x258>; - }; + dspgpio6: keystone_dsp_gpio@258 { + compatible = "ti,keystone-dsp-gpio"; + reg = <0x258 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x258>; + }; - dspgpio7: keystone_dsp_gpio@262025c { - compatible = "ti,keystone-dsp-gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio,syscon-dev = <&devctrl 0x25c>; + dspgpio7: keystone_dsp_gpio@25c { + compatible = "ti,keystone-dsp-gpio"; + reg = <0x25c 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x25c>; + }; }; dsp0: dsp@10800000 { diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi index b61a830f4a4d2..374c80124c4ea 100644 --- a/arch/arm/boot/dts/keystone-k2l.dtsi +++ b/arch/arm/boot/dts/keystone-k2l.dtsi @@ -289,32 +289,38 @@ clocks = <&clkosr>; }; - dspgpio0: keystone_dsp_gpio@2620240 { - compatible = "ti,keystone-dsp-gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio,syscon-dev = <&devctrl 0x240>; - }; + devctrl: device-state-control@2620000 { + dspgpio0: keystone_dsp_gpio@240 { + compatible = "ti,keystone-dsp-gpio"; + reg = <0x240 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x240>; + }; - dspgpio1: keystone_dsp_gpio@2620244 { - compatible = "ti,keystone-dsp-gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio,syscon-dev = <&devctrl 0x244>; - }; + dspgpio1: keystone_dsp_gpio@244 { + compatible = "ti,keystone-dsp-gpio"; + reg = <0x244 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x244>; + }; - dspgpio2: keystone_dsp_gpio@2620248 { - compatible = "ti,keystone-dsp-gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio,syscon-dev = <&devctrl 0x248>; - }; + dspgpio2: keystone_dsp_gpio@248 { + compatible = "ti,keystone-dsp-gpio"; + reg = <0x248 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x248>; + }; - dspgpio3: keystone_dsp_gpio@262024c { - compatible = "ti,keystone-dsp-gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio,syscon-dev = <&devctrl 0x24c>; + dspgpio3: keystone_dsp_gpio@24c { + compatible = "ti,keystone-dsp-gpio"; + reg = <0x24c 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x24c>; + }; }; dsp0: dsp@10800000 { diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 93ea5c69ea77a..c298675a29a56 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -87,15 +87,28 @@ }; devctrl: device-state-control@2620000 { - compatible = "ti,keystone-devctrl", "syscon"; + compatible = "ti,keystone-devctrl", "syscon", "simple-mfd"; reg = <0x02620000 0x1000>; - }; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x02620000 0x1000>; + + kirq0: keystone_irq@2a0 { + compatible = "ti,keystone-irq"; + reg = <0x2a0 0x4>; + interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <1>; + ti,syscon-dev = <&devctrl 0x2a0>; + }; - rstctrl: reset-controller { - compatible = "ti,keystone-reset"; - ti,syscon-pll = <&pllctrl 0xe4>; - ti,syscon-dev = <&devctrl 0x328>; - ti,wdt-list = <0>; + rstctrl: reset-controller@328 { + compatible = "ti,keystone-reset"; + reg = <0x328 0x10>; + ti,syscon-pll = <&pllctrl 0xe4>; + ti,syscon-dev = <&devctrl 0x328>; + ti,wdt-list = <0>; + }; }; /include/ "keystone-clocks.dtsi" @@ -282,14 +295,6 @@ 1 0 0x21000A00 0x00000100>; }; - kirq0: keystone_irq@26202a0 { - compatible = "ti,keystone-irq"; - interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; - interrupt-controller; - #interrupt-cells = <1>; - ti,syscon-dev = <&devctrl 0x2a0>; - }; - pcie0: pcie@21800000 { compatible = "ti,keystone-pcie", "snps,dw-pcie"; clocks = <&clkpcie>; @@ -338,5 +343,12 @@ <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>; }; }; + + emif: emif@21010000 { + compatible = "ti,emif-keystone"; + reg = <0x21010000 0x200>; + interrupts = <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gic>; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts index d091ecb61cd2e..17f48f88a9835 100644 --- a/arch/arm/boot/dts/kirkwood-b3.dts +++ b/arch/arm/boot/dts/kirkwood-b3.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Device Tree file for Excito Bubba B3 * * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. * * Note: This requires a new'ish version of u-boot, which disables the * L2 cache. If your B3 silently fails to boot, u-boot is probably too diff --git a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts index f16a73e49a88b..07fbfca444d5a 100644 --- a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts +++ b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Device Tree file for Seagate Blackarmor NAS220 * * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com> - * - * Licensed under GPLv2 or later. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-d2net.dts b/arch/arm/boot/dts/kirkwood-d2net.dts index e1c25c35e9ce8..bd3b266dd7660 100644 --- a/arch/arm/boot/dts/kirkwood-d2net.dts +++ b/arch/arm/boot/dts/kirkwood-d2net.dts @@ -1,11 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree file for d2 Network v2 * * Copyright (C) 2014 Simon Guinot <simon.guinot@sequanux.org> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts index aee6f02b1c801..2adb17c955aa6 100644 --- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts +++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts @@ -1,12 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Marvell DB-88F6281-BP Development Board Setup * * Saeed Bishara <saeed@marvell.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts index e8b23e13ec0c9..f84a485399178 100644 --- a/arch/arm/boot/dts/kirkwood-db-88f6282.dts +++ b/arch/arm/boot/dts/kirkwood-db-88f6282.dts @@ -1,12 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Marvell DB-88F6282-BP Development Board Setup * * Saeed Bishara <saeed@marvell.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi index 812df691ae3d1..6fe2e31534afd 100644 --- a/arch/arm/boot/dts/kirkwood-db.dtsi +++ b/arch/arm/boot/dts/kirkwood-db.dtsi @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Marvell DB-{88F6281,88F6282}-BP Development Board Setup * * Saeed Bishara <saeed@marvell.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * * This file contains the definitions that are common between the 6281 * and 6282 variants of the Marvell Kirkwood Development Board. */ diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts index 4d2b15d6244ad..31ceacd841dee 100644 --- a/arch/arm/boot/dts/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/kirkwood-dir665.dts @@ -1,9 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2014 Claudio Leite <leitec@staticky.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-ds109.dts b/arch/arm/boot/dts/kirkwood-ds109.dts index d4bcc1c7f6b31..29982e7acb7fd 100644 --- a/arch/arm/boot/dts/kirkwood-ds109.dts +++ b/arch/arm/boot/dts/kirkwood-ds109.dts @@ -1,10 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Andrew Lunn <andrew@lunn.ch> * Ben Peddell <klightspeed@killerwolves.net> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-ds110jv10.dts b/arch/arm/boot/dts/kirkwood-ds110jv10.dts index 95bf83b91b4ac..d68c616e9309d 100644 --- a/arch/arm/boot/dts/kirkwood-ds110jv10.dts +++ b/arch/arm/boot/dts/kirkwood-ds110jv10.dts @@ -1,10 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Andrew Lunn <andrew@lunn.ch> * Ben Peddell <klightspeed@killerwolves.net> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-ds111.dts b/arch/arm/boot/dts/kirkwood-ds111.dts index a85a4664431bb..e1420cbcd7e43 100644 --- a/arch/arm/boot/dts/kirkwood-ds111.dts +++ b/arch/arm/boot/dts/kirkwood-ds111.dts @@ -1,10 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Andrew Lunn <andrew@lunn.ch> * Ben Peddell <klightspeed@killerwolves.net> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts index 6cef4bdbc01b7..f48609e95afe4 100644 --- a/arch/arm/boot/dts/kirkwood-ds112.dts +++ b/arch/arm/boot/dts/kirkwood-ds112.dts @@ -1,10 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Andrew Lunn <andrew@lunn.ch> * Ben Peddell <klightspeed@killerwolves.net> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-ds209.dts b/arch/arm/boot/dts/kirkwood-ds209.dts index 6d25093a9ac48..f41fe95e055f0 100644 --- a/arch/arm/boot/dts/kirkwood-ds209.dts +++ b/arch/arm/boot/dts/kirkwood-ds209.dts @@ -1,10 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Andrew Lunn <andrew@lunn.ch> * Ben Peddell <klightspeed@killerwolves.net> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-ds210.dts b/arch/arm/boot/dts/kirkwood-ds210.dts index 2f1933efcac1f..729f959a7838f 100644 --- a/arch/arm/boot/dts/kirkwood-ds210.dts +++ b/arch/arm/boot/dts/kirkwood-ds210.dts @@ -1,10 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Andrew Lunn <andrew@lunn.ch> * Ben Peddell <klightspeed@killerwolves.net> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-ds212.dts b/arch/arm/boot/dts/kirkwood-ds212.dts index 7f32e7abffac9..416bab50d1709 100644 --- a/arch/arm/boot/dts/kirkwood-ds212.dts +++ b/arch/arm/boot/dts/kirkwood-ds212.dts @@ -1,10 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Andrew Lunn <andrew@lunn.ch> * Ben Peddell <klightspeed@killerwolves.net> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-ds212j.dts b/arch/arm/boot/dts/kirkwood-ds212j.dts index f5c4213fc67cc..14cf4d8afaf37 100644 --- a/arch/arm/boot/dts/kirkwood-ds212j.dts +++ b/arch/arm/boot/dts/kirkwood-ds212j.dts @@ -1,10 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Andrew Lunn <andrew@lunn.ch> * Ben Peddell <klightspeed@killerwolves.net> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-ds409.dts b/arch/arm/boot/dts/kirkwood-ds409.dts index e80a962ebba0a..a8650f9e3eb76 100644 --- a/arch/arm/boot/dts/kirkwood-ds409.dts +++ b/arch/arm/boot/dts/kirkwood-ds409.dts @@ -1,10 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Andrew Lunn <andrew@lunn.ch> * Ben Peddell <klightspeed@killerwolves.net> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-ds409slim.dts b/arch/arm/boot/dts/kirkwood-ds409slim.dts index cae5af4b88b56..27a1d840bd15c 100644 --- a/arch/arm/boot/dts/kirkwood-ds409slim.dts +++ b/arch/arm/boot/dts/kirkwood-ds409slim.dts @@ -1,10 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Andrew Lunn <andrew@lunn.ch> * Ben Peddell <klightspeed@killerwolves.net> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/kirkwood-ds411.dts index 72e58307416d5..86907be70cf99 100644 --- a/arch/arm/boot/dts/kirkwood-ds411.dts +++ b/arch/arm/boot/dts/kirkwood-ds411.dts @@ -1,10 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Andrew Lunn <andrew@lunn.ch> * Ben Peddell <klightspeed@killerwolves.net> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-ds411j.dts b/arch/arm/boot/dts/kirkwood-ds411j.dts index 3348e330f0742..bb3200daea1e4 100644 --- a/arch/arm/boot/dts/kirkwood-ds411j.dts +++ b/arch/arm/boot/dts/kirkwood-ds411j.dts @@ -1,10 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Andrew Lunn <andrew@lunn.ch> * Ben Peddell <klightspeed@killerwolves.net> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-ds411slim.dts b/arch/arm/boot/dts/kirkwood-ds411slim.dts index aaaf31b81522f..9c5364a4e0a88 100644 --- a/arch/arm/boot/dts/kirkwood-ds411slim.dts +++ b/arch/arm/boot/dts/kirkwood-ds411slim.dts @@ -1,10 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Andrew Lunn <andrew@lunn.ch> * Ben Peddell <klightspeed@killerwolves.net> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts index 1b0f070c26766..6158214a939a8 100644 --- a/arch/arm/boot/dts/kirkwood-laplug.dts +++ b/arch/arm/boot/dts/kirkwood-laplug.dts @@ -1,9 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2013 Maxime Hadjinlian <maxime.hadjinlian@gmail.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi index b9125e5ed0764..377b6e970259f 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree common file for kirkwood-6282 based Buffalo Linkstation * * Copyright (C) 2015, 2016 * Roger Shimizu <rogershimizu@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "kirkwood.dtsi" diff --git a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi index 29d929535453b..ba629e02ba31a 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree common file for kirkwood-6281 based 2-Bay Buffalo Linkstation * * Copyright (C) 2015, 2016 * Roger Shimizu <rogershimizu@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "kirkwood.dtsi" diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts index 9cc05203baee3..8bb3810889106 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts +++ b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Buffalo Linkstation LS-QVL * @@ -6,44 +7,6 @@ * Based on kirkwood-linkstation-lswvl.dts, * Copyright (C) 2015, 2016 * Roger Shimizu <rogershimizu@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts index ff37e76ab551d..3f2a0bfe03edd 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts +++ b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Buffalo Linkstation LS-VL * * Copyright (C) 2015, 2016 * Roger Shimizu <rogershimizu@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts index f602c059c7189..c42d0da38fe7d 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Buffalo Linkstation LS-WSXL * * Copyright (C) 2015, 2016 * Roger Shimizu <rogershimizu@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts index ef8fc1a077f80..e0f62adc0d5da 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Buffalo Linkstation LS-WVL * * Copyright (C) 2015, 2016 * Roger Shimizu <rogershimizu@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts index ce41d553b693f..c6024b569423a 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts +++ b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Buffalo Linkstation LS-WXL * * Copyright (C) 2015, 2016 * Roger Shimizu <rogershimizu@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/kirkwood-linkstation.dtsi index b459042a904a5..407d6d8b3a7fb 100644 --- a/arch/arm/boot/dts/kirkwood-linkstation.dtsi +++ b/arch/arm/boot/dts/kirkwood-linkstation.dtsi @@ -1,46 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree common file for kirkwood based Buffalo Linkstation * * Copyright (C) 2015, 2016 * Roger Shimizu <rogershimizu@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ / { diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts index f21a50dd98691..a7d659b7145ae 100644 --- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts +++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * kirkwood-viper.dts - Device Tree file for Linksys viper (E4200v2 / EA4500) * @@ -6,9 +7,6 @@ * (c) 2014 Luka Perkov <luka@openwrt.org> * (c) 2014 Randy C. Will <randall.will@gmail.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index 327023a477b89..86d532916d565 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Marvell 88F6281 GTW GE Board * * Lennert Buytenhek <buytenh@marvell.com> * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * * This file contains the definitions that are common between the 6281 * and 6282 variants of the Marvell Kirkwood Development Board. */ diff --git a/arch/arm/boot/dts/kirkwood-nas2big.dts b/arch/arm/boot/dts/kirkwood-nas2big.dts index f53bcacf6b635..6a2934b7d0ceb 100644 --- a/arch/arm/boot/dts/kirkwood-nas2big.dts +++ b/arch/arm/boot/dts/kirkwood-nas2big.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree file for LaCie 2Big NAS * @@ -5,9 +6,6 @@ * * Author: Simon Guinot <simon.guinot@sequanux.org> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-net2big.dts b/arch/arm/boot/dts/kirkwood-net2big.dts index 13a44773b6dfa..3e3ac289e5b08 100644 --- a/arch/arm/boot/dts/kirkwood-net2big.dts +++ b/arch/arm/boot/dts/kirkwood-net2big.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree file for LaCie 2Big Network v2 * @@ -8,9 +9,6 @@ * Based on netxbig_v2-setup.c, * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts index d2d44df9c8c0b..cba8a2b6f6d9f 100644 --- a/arch/arm/boot/dts/kirkwood-net5big.dts +++ b/arch/arm/boot/dts/kirkwood-net5big.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree file for LaCie 5Big Network v2 * @@ -8,9 +9,6 @@ * Based on netxbig_v2-setup.c, * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index c0413b63cf2ee..cb564c3bcdc43 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Device Tree file for NETGEAR ReadyNAS Duo v2 * * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts index 2bfc6cfa151d3..8cc8550242ef6 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Device Tree file for NETGEAR ReadyNAS NV+ v2 * * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi index 52b58fe0c4fee..b5737026e244d 100644 --- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi +++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree common file for LaCie 2Big and 5Big Network v2 * @@ -8,9 +9,6 @@ * Based on netxbig_v2-setup.c, * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ #include <dt-bindings/leds/leds-netxbig.h> diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts index 6ab104b4bb429..b69b096f267b3 100644 --- a/arch/arm/boot/dts/kirkwood-nsa320.dts +++ b/arch/arm/boot/dts/kirkwood-nsa320.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ /* Device tree file for the Zyxel NSA 320 NAS box. * * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. * * Based upon the board setup file created by Peter Schildmann */ diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts b/arch/arm/boot/dts/kirkwood-nsa325.dts index 36c64816bf7f1..6f8085dbb1f41 100644 --- a/arch/arm/boot/dts/kirkwood-nsa325.dts +++ b/arch/arm/boot/dts/kirkwood-nsa325.dts @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ /* Device tree file for the Zyxel NSA 325 NAS box. * * Copyright (c) 2015, Hans Ulli Kroll <ulli.kroll@googlemail.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. * * Based upon the board setup file created by Peter Schildmann */ diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts index 27cc913ca0f56..946f0f453dd1a 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree file for OpenBlocks A7 board * @@ -5,9 +6,6 @@ * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-openrd-base.dts b/arch/arm/boot/dts/kirkwood-openrd-base.dts index 8af58999606df..094191ece3d7e 100644 --- a/arch/arm/boot/dts/kirkwood-openrd-base.dts +++ b/arch/arm/boot/dts/kirkwood-openrd-base.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Marvell OpenRD Base Board Description * * Andrew Lunn <andrew@lunn.ch> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * * This file contains the definitions that are specific to OpenRD * base variant of the Marvell Kirkwood Development Board. */ diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/kirkwood-openrd-client.dts index 96ff59d68f445..d4e0b8150a84c 100644 --- a/arch/arm/boot/dts/kirkwood-openrd-client.dts +++ b/arch/arm/boot/dts/kirkwood-openrd-client.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Marvell OpenRD Client Board Description * * Andrew Lunn <andrew@lunn.ch> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * * This file contains the definitions that are specific to OpenRD * client variant of the Marvell Kirkwood Development Board. */ diff --git a/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts b/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts index 9f12f8b53e240..888e13320c190 100644 --- a/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts +++ b/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Marvell OpenRD Ultimate Board Description * * Andrew Lunn <andrew@lunn.ch> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * * This file contains the definitions that are specific to OpenRD * ultimate variant of the Marvell Kirkwood Development Board. */ diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi index 7175511a92da2..47f03c69c55a5 100644 --- a/arch/arm/boot/dts/kirkwood-openrd.dtsi +++ b/arch/arm/boot/dts/kirkwood-openrd.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Marvell OpenRD (Base|Client|Ultimate) Board Description * * Andrew Lunn <andrew@lunn.ch> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * * This file contains the definitions that are common between the three * variants of the Marvell Kirkwood Development Board. */ diff --git a/arch/arm/boot/dts/kirkwood-pogo_e02.dts b/arch/arm/boot/dts/kirkwood-pogo_e02.dts index a190080c9c4f9..f9e95e55f36dd 100644 --- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts +++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * kirkwood-pogo_e02.dts - Device tree file for Pogoplug E02 * @@ -7,9 +8,6 @@ * Arch Linux ARM by Oleg Rakhmanov <moonman.ca@gmail.com> * OpenWrt by Felix Kaechele <heffer@fedoraproject.org> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts index 5ce220ac9611f..5aa4669ae2548 100644 --- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts +++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts @@ -35,7 +35,7 @@ pinctrl-names = "default"; eject { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <KEY_EJECTCD>; label = "Eject Button"; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts index b8af907249fb9..712d6042b132a 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6192.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Marvell RD88F6192 Board descrition * * Andrew Lunn <andrew@lunn.ch> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * * This file contains the definitions that are common between the three * variants of the Marvell Kirkwood Development Board. */ diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts index 9ec5a65561e9c..5da163591bbf4 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Marvell RD88F6181 A Board descrition * * Andrew Lunn <andrew@lunn.ch> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * * This file contains the definitions for the board with the A0 or * higher stepping of the SoC. The ethernet switch does not have a * "wan" port. diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts index 6a4a65ec79443..a9fee2c2bcaf5 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Marvell RD88F6181 Z0 stepping descrition * * Andrew Lunn <andrew@lunn.ch> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * * This file contains the definitions for the board using the Z0 * stepping of the SoC. The ethernet switch has a "wan" port. */ diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi index 91f5da5dae5f1..0f22f0e6f56b3 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Marvell RD88F6181 Common Board descrition * * Andrew Lunn <andrew@lunn.ch> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - * * This file contains the definitions that are common between the two * variants of the Marvell Kirkwood Development Board. */ diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/kirkwood-rs212.dts index 2c722ecd53313..c51cea883215d 100644 --- a/arch/arm/boot/dts/kirkwood-rs212.dts +++ b/arch/arm/boot/dts/kirkwood-rs212.dts @@ -1,10 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Andrew Lunn <andrew@lunn.ch> * Ben Peddell <klightspeed@killerwolves.net> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-rs409.dts b/arch/arm/boot/dts/kirkwood-rs409.dts index 921ca49e85a4d..43673b03cb356 100644 --- a/arch/arm/boot/dts/kirkwood-rs409.dts +++ b/arch/arm/boot/dts/kirkwood-rs409.dts @@ -1,10 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Andrew Lunn <andrew@lunn.ch> * Ben Peddell <klightspeed@killerwolves.net> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-rs411.dts b/arch/arm/boot/dts/kirkwood-rs411.dts index 02852b0c809f0..41fa63cec8398 100644 --- a/arch/arm/boot/dts/kirkwood-rs411.dts +++ b/arch/arm/boot/dts/kirkwood-rs411.dts @@ -1,10 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Andrew Lunn <andrew@lunn.ch> * Ben Peddell <klightspeed@killerwolves.net> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi index 7196c7f3e1096..0a698d3b73937 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs * * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com> - * - * Licensed under GPLv2 */ #include "kirkwood.dtsi" diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts index e2b4ea4f9e107..ae8f493c9a0f3 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * kirkwood-sheevaplug-esata.dts - Device tree file for eSATA Sheevaplug * * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com> - * - * Licensed under GPLv2 */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts index 82f6abf120fd3..c73cc904e5c4b 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts +++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * kirkwood-sheevaplug.dts - Device tree file for Sheevaplug * * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com> - * - * Licensed under GPLv2 */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi index 210d21a65bd13..c97ed29a0a0bf 100644 --- a/arch/arm/boot/dts/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/kirkwood-synology.dtsi @@ -1,12 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Nodes for Marvell 628x Synology devices * * Andrew Lunn <andrew@lunn.ch> * Ben Peddell <klightspeed@killerwolves.net> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ / { diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts index 3500f4738fb04..fe63b3a03a72c 100644 --- a/arch/arm/boot/dts/kirkwood-t5325.dts +++ b/arch/arm/boot/dts/kirkwood-t5325.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree file for HP t5325 Thin Client" * @@ -6,9 +7,6 @@ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * Andrew Lunn <andrew@lunn.ch> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-ts419-6281.dts b/arch/arm/boot/dts/kirkwood-ts419-6281.dts index aa22aa862857f..4a42ebcca4f05 100644 --- a/arch/arm/boot/dts/kirkwood-ts419-6281.dts +++ b/arch/arm/boot/dts/kirkwood-ts419-6281.dts @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Device Tree file for QNAP TS41X with 6281 SoC * * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-ts419-6282.dts b/arch/arm/boot/dts/kirkwood-ts419-6282.dts index e3e71f48acc82..be772e194c2b0 100644 --- a/arch/arm/boot/dts/kirkwood-ts419-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts419-6282.dts @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Device Tree file for QNAP TS41X with 6282 SoC * * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. */ /dts-v1/; diff --git a/arch/arm/boot/dts/kirkwood-ts419.dtsi b/arch/arm/boot/dts/kirkwood-ts419.dtsi index 02bd537627051..717236853e458 100644 --- a/arch/arm/boot/dts/kirkwood-ts419.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts419.dtsi @@ -1,12 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Device Tree include file for QNAP TS41X * * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. */ / { diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index eb2bf74096559..81c7eda2c4421 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -382,7 +382,7 @@ audio0: audio-controller@a0000 { compatible = "marvell,kirkwood-audio"; - #sound-dai-cells = <1>; + #sound-dai-cells = <0>; reg = <0xa0000 0x2210>; interrupts = <24>; clocks = <&gate_clk 9>; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index a30ee9fcb3ae5..b47cac23a04be 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -88,10 +88,14 @@ }; &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; }; &i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; clock-frequency = <400000>; }; @@ -213,6 +217,18 @@ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ >; }; + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ + >; + }; + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ + >; + }; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 47915447a8266..3e174e474d3d0 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -83,10 +83,14 @@ }; &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; }; &i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; clock-frequency = <400000>; at24@50 { compatible = "atmel,24c64"; @@ -144,6 +148,18 @@ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ >; }; + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ + >; + }; + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ + >; + }; }; &uart2 { diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index c31dad98f989d..fbd2897566c38 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -788,5 +788,21 @@ clock-names = "ipg", "per"; big-endian; }; + + ocram1: sram@10000000 { + compatible = "mmio-sram"; + reg = <0x0 0x10000000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x10000000 0x10000>; + }; + + ocram2: sram@10010000 { + compatible = "mmio-sram"; + reg = <0x0 0x10010000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x10010000 0x10000>; + }; }; }; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index d2e3eeaa1a5fe..dcc9292d2ffaa 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -46,6 +46,7 @@ #include <dt-bindings/clock/meson8b-clkc.h> #include <dt-bindings/gpio/meson8-gpio.h> #include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h> +#include <dt-bindings/reset/amlogic,meson8b-reset.h> #include "meson.dtsi" / { @@ -187,6 +188,12 @@ reg = <0x8000 0x4>, <0x4000 0x460>; }; + reset: reset-controller@4404 { + compatible = "amlogic,meson8b-reset"; + reg = <0x4404 0x9c>; + #reset-cells = <1>; + }; + analog_top: analog-top@81a8 { compatible = "amlogic,meson8-analog-top", "syscon"; reg = <0x81a8 0x14>; @@ -383,10 +390,12 @@ compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy"; clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>; clock-names = "usb_general", "usb"; + resets = <&reset RESET_USB_OTG>; }; &usb1_phy { compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy"; clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>; clock-names = "usb_general", "usb"; + resets = <&reset RESET_USB_OTG>; }; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index 9ff6ca4e20d06..3a5603d95b703 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -54,6 +54,7 @@ aliases { serial0 = &uart_AO; + mmc0 = &sd_card_slot; }; memory { @@ -69,6 +70,37 @@ default-state = "off"; }; }; + + tflash_vdd: regulator-tflash_vdd { + /* + * signal name from schematics: TFLASH_VDD_EN + */ + compatible = "regulator-fixed"; + + regulator-name = "TFLASH_VDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + tf_io: gpio-regulator-tf_io { + compatible = "regulator-gpio"; + + regulator-name = "TF_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + /* + * signal name from schematics: TF_3V3N_1V8_EN + */ + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0 + 1800000 1>; + }; }; &uart_AO { @@ -99,3 +131,59 @@ &usb1 { status = "okay"; }; + +&sdio { + status = "okay"; + + pinctrl-0 = <&sd_b_pins>; + pinctrl-names = "default"; + + /* SD card */ + sd_card_slot: slot@1 { + compatible = "mmc-slot"; + reg = <1>; + status = "okay"; + + bus-width = <4>; + no-sdio; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&tflash_vdd>; + vqmmc-supply = <&tf_io>; + }; +}; + +ðmac { + status = "okay"; + + snps,reset-gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; + + pinctrl-0 = <ð_rgmii_pins>; + pinctrl-names = "default"; + + phy-mode = "rgmii"; + phy-handle = <ð_phy>; + amlogic,tx-delay-ns = <4>; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* Realtek RTL8211F (0x001cc916) */ + eth_phy: ethernet-phy@0 { + reg = <0>; + eee-broken-1000t; + interrupt-parent = <&gpio_intc>; + /* GPIOH_3 */ + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 7cd03ed3742e7..553b82174604e 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -152,7 +152,7 @@ reset: reset-controller@4404 { compatible = "amlogic,meson8b-reset"; - reg = <0x4404 0x20>; + reg = <0x4404 0x9c>; #reset-cells = <1>; }; @@ -183,7 +183,36 @@ reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinctrl_cbus 0 0 130>; + gpio-ranges = <&pinctrl_cbus 0 0 83>; + }; + + eth_rgmii_pins: eth-rgmii { + mux { + groups = "eth_tx_clk", + "eth_tx_en", + "eth_txd1_0", + "eth_txd1_1", + "eth_txd0_0", + "eth_txd0_1", + "eth_rx_clk", + "eth_rx_dv", + "eth_rxd1", + "eth_rxd0", + "eth_mdio_en", + "eth_mdc", + "eth_ref_clk", + "eth_txd2", + "eth_txd3"; + function = "ethernet"; + }; + }; + + sd_b_pins: sd-b { + mux { + groups = "sd_d0_b", "sd_d1_b", "sd_d2_b", + "sd_d3_b", "sd_clk_b", "sd_cmd_b"; + function = "sd_b"; + }; }; }; }; @@ -203,8 +232,18 @@ }; ðmac { - clocks = <&clkc CLKID_ETH>; - clock-names = "stmmaceth"; + compatible = "amlogic,meson8b-dwmac", "snps,dwmac-3.70a", "snps,dwmac"; + + reg = <0xc9410000 0x10000 + 0xc1108140 0x4>; + + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + + resets = <&reset RESET_ETHERNET>; + reset-names = "stmmaceth"; }; &gpio_intc { @@ -219,6 +258,18 @@ clock-names = "core"; }; +&i2c_AO { + clocks = <&clkc CLKID_CLK81>; +}; + +&i2c_A { + clocks = <&clkc CLKID_I2C>; +}; + +&i2c_B { + clocks = <&clkc CLKID_I2C>; +}; + &L2 { arm,data-latency = <3 3 3>; arm,tag-latency = <2 2 2>; diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi index 4d61e5b1334a6..ddc7a7bb33c0d 100644 --- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi @@ -68,6 +68,19 @@ }; }; + cpcap_audio: audio-codec { + #sound-dai-cells = <1>; + + port@0 { + cpcap_audio_codec0: endpoint { + }; + }; + port@1 { + cpcap_audio_codec1: endpoint { + }; + }; + }; + cpcap_rtc: rtc { compatible = "motorola,cpcap-rtc"; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 8e7c65464c9d0..e10c034965246 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -28,7 +28,7 @@ compatible = "mediatek,mt7623"; interrupt-parent = <&sysirq>; - cpu_opp_table: opp_table { + cpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-shared; @@ -94,6 +94,9 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x1>; + clocks = <&infracfg CLK_INFRA_CPUSEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; operating-points-v2 = <&cpu_opp_table>; clock-frequency = <1300000000>; }; @@ -102,6 +105,9 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x2>; + clocks = <&infracfg CLK_INFRA_CPUSEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; operating-points-v2 = <&cpu_opp_table>; clock-frequency = <1300000000>; }; @@ -110,6 +116,9 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x3>; + clocks = <&infracfg CLK_INFRA_CPUSEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; operating-points-v2 = <&cpu_opp_table>; clock-frequency = <1300000000>; }; @@ -136,32 +145,32 @@ }; thermal-zones { - cpu_thermal: cpu_thermal { + cpu_thermal: cpu-thermal { polling-delay-passive = <1000>; polling-delay = <1000>; thermal-sensors = <&thermal 0>; trips { - cpu_passive: cpu_passive { + cpu_passive: cpu-passive { temperature = <47000>; hysteresis = <2000>; type = "passive"; }; - cpu_active: cpu_active { + cpu_active: cpu-active { temperature = <67000>; hysteresis = <2000>; type = "active"; }; - cpu_hot: cpu_hot { + cpu_hot: cpu-hot { temperature = <87000>; hysteresis = <2000>; type = "hot"; }; - cpu_crit { + cpu-crit { temperature = <107000>; hysteresis = <2000>; type = "critical"; @@ -668,6 +677,111 @@ #reset-cells = <1>; }; + pcie: pcie@1a140000 { + compatible = "mediatek,mt7623-pcie"; + device_type = "pci"; + reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */ + <0 0x1a142000 0 0x1000>, /* Port0 registers */ + <0 0x1a143000 0 0x1000>, /* Port1 registers */ + <0 0x1a144000 0 0x1000>; /* Port2 registers */ + reg-names = "subsys", "port0", "port1", "port2"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 0>; + interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>, + <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>, + <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>, + <&hifsys CLK_HIFSYS_PCIE0>, + <&hifsys CLK_HIFSYS_PCIE1>, + <&hifsys CLK_HIFSYS_PCIE2>; + clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2"; + resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>, + <&hifsys MT2701_HIFSYS_PCIE1_RST>, + <&hifsys MT2701_HIFSYS_PCIE2_RST>; + reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2"; + phys = <&pcie0_port PHY_TYPE_PCIE>, + <&pcie1_port PHY_TYPE_PCIE>, + <&u3port1 PHY_TYPE_PCIE>; + phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; + bus-range = <0x00 0xff>; + status = "disabled"; + ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000 + 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; + + pcie@0,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>; + ranges; + num-lanes = <1>; + status = "disabled"; + }; + + pcie@1,0 { + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; + ranges; + num-lanes = <1>; + status = "disabled"; + }; + + pcie@2,0 { + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; + ranges; + num-lanes = <1>; + status = "disabled"; + }; + }; + + pcie0_phy: pcie-phy@1a149000 { + compatible = "mediatek,generic-tphy-v1"; + reg = <0 0x1a149000 0 0x0700>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + pcie0_port: pcie-phy@1a149900 { + reg = <0 0x1a149900 0 0x0700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + }; + + pcie1_phy: pcie-phy@1a14a000 { + compatible = "mediatek,generic-tphy-v1"; + reg = <0 0x1a14a000 0 0x0700>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + pcie1_port: pcie-phy@1a14a900 { + reg = <0 0x1a14a900 0 0x0700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + }; + usb1: usb@1a1c0000 { compatible = "mediatek,mt7623-xhci", "mediatek,mt8173-xhci"; diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index 7bf5aa2237c9d..bbf56f855e468 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -39,7 +39,34 @@ }; }; - gpio_keys { + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "fixed-5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&key_pins_a>; @@ -120,7 +147,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; - pinctrl-names = "default"; reset-gpios = <&pio 33 0>; core-supply = <&mt6323_vpa_reg>; io-supply = <&mt6323_vemc3v3_reg>; @@ -191,8 +217,8 @@ bus-width = <8>; max-frequency = <50000000>; cap-mmc-highspeed; - vmmc-supply = <&mt6323_vemc3v3_reg>; - vqmmc-supply = <&mt6323_vio18_reg>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; non-removable; }; @@ -205,20 +231,42 @@ max-frequency = <50000000>; cap-sd-highspeed; cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>; - vmmc-supply = <&mt6323_vmch_reg>; - vqmmc-supply = <&mt6323_vio18_reg>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_default>; + status = "okay"; + + pcie@0,0 { + status = "okay"; + }; + + pcie@1,0 { + status = "okay"; + }; +}; + +&pcie0_phy { + status = "okay"; +}; + +&pcie1_phy { + status = "okay"; }; &pio { cir_pins_a:cir@0 { - pins_cir { + pins-cir { pinmux = <MT7623_PIN_46_IR_FUNC_IR>; bias-disable; }; }; i2c0_pins_a: i2c@0 { - pins_i2c0 { + pins-i2c0 { pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>, <MT7623_PIN_76_SCL0_FUNC_SCL0>; bias-disable; @@ -226,7 +274,7 @@ }; i2c1_pins_a: i2c@1 { - pin_i2c1 { + pin-i2c1 { pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>, <MT7623_PIN_58_SCL1_FUNC_SCL1>; bias-disable; @@ -234,7 +282,7 @@ }; i2s0_pins_a: i2s@0 { - pin_i2s0 { + pin-i2s0 { pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>, <MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>, <MT7623_PIN_73_I2S0_LRCK_FUNC_I2S0_LRCK>, @@ -246,7 +294,7 @@ }; i2s1_pins_a: i2s@1 { - pin_i2s1 { + pin-i2s1 { pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>, <MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>, <MT7623_PIN_35_I2S1_BCK_FUNC_I2S1_BCK>, @@ -258,7 +306,7 @@ }; key_pins_a: keys@0 { - pins_keys { + pins-keys { pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>, <MT7623_PIN_257_GPIO257_FUNC_GPIO257> ; input-enable; @@ -266,7 +314,7 @@ }; led_pins_a: leds@0 { - pins_leds { + pins-leds { pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>, <MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>, <MT7623_PIN_241_EXT_SCK_FUNC_GPIO241>; @@ -274,7 +322,7 @@ }; mmc0_pins_default: mmc0default { - pins_cmd_dat { + pins-cmd-dat { pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>, <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>, <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>, @@ -288,19 +336,19 @@ bias-pull-up; }; - pins_clk { + pins-clk { pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>; bias-pull-down; }; - pins_rst { + pins-rst { pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>; bias-pull-up; }; }; mmc0_pins_uhs: mmc0 { - pins_cmd_dat { + pins-cmd-dat { pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>, <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>, <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>, @@ -315,20 +363,20 @@ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; }; - pins_clk { + pins-clk { pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>; drive-strength = <MTK_DRIVE_2mA>; bias-pull-down = <MTK_PUPD_SET_R1R0_01>; }; - pins_rst { + pins-rst { pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>; bias-pull-up; }; }; mmc1_pins_default: mmc1default { - pins_cmd_dat { + pins-cmd-dat { pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>, <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>, <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>, @@ -339,26 +387,26 @@ bias-pull-up = <MTK_PUPD_SET_R1R0_10>; }; - pins_clk { + pins-clk { pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>; bias-pull-down; drive-strength = <MTK_DRIVE_4mA>; }; - pins_wp { + pins-wp { pinmux = <MT7623_PIN_29_EINT7_FUNC_MSDC1_WP>; input-enable; bias-pull-up; }; - pins_insert { + pins-insert { pinmux = <MT7623_PIN_261_MSDC1_INS_FUNC_GPIO261>; bias-pull-up; }; }; mmc1_pins_uhs: mmc1 { - pins_cmd_dat { + pins-cmd-dat { pinmux = <MT7623_PIN_107_MSDC1_DAT0_FUNC_MSDC1_DAT0>, <MT7623_PIN_108_MSDC1_DAT1_FUNC_MSDC1_DAT1>, <MT7623_PIN_109_MSDC1_DAT2_FUNC_MSDC1_DAT2>, @@ -369,15 +417,23 @@ bias-pull-up = <MTK_PUPD_SET_R1R0_10>; }; - pins_clk { + pins-clk { pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>; drive-strength = <MTK_DRIVE_4mA>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; }; + pcie_default: pcie_pin_default { + pins_cmd_dat { + pinmux = <MT7623_PIN_208_AUD_EXT_CK1_FUNC_PCIE0_PERST_N>, + <MT7623_PIN_209_AUD_EXT_CK2_FUNC_PCIE1_PERST_N>; + bias-disable; + }; + }; + pwm_pins_a: pwm@0 { - pins_pwm { + pins-pwm { pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>, <MT7623_PIN_204_PWM1_FUNC_PWM1>, <MT7623_PIN_205_PWM2_FUNC_PWM2>, @@ -387,7 +443,7 @@ }; spi0_pins_a: spi@0 { - pins_spi { + pins-spi { pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>, <MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>, <MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>, @@ -397,18 +453,25 @@ }; uart0_pins_a: uart@0 { - pins_dat { + pins-dat { pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>, <MT7623_PIN_80_UTXD0_FUNC_UTXD0>; }; }; uart1_pins_a: uart@1 { - pins_dat { + pins-dat { pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>, <MT7623_PIN_82_UTXD1_FUNC_UTXD1>; }; }; + + uart2_pins_a: uart@2 { + pins-dat { + pinmux = <MT7623_PIN_14_GPIO14_FUNC_URXD2>, + <MT7623_PIN_15_GPIO15_FUNC_UTXD2>; + }; + }; }; &pwm { @@ -454,26 +517,30 @@ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; - status = "disabled"; + status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins_a>; - status = "disabled"; + status = "okay"; }; &uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>; status = "okay"; }; &usb1 { - vusb33-supply = <&mt6323_vusb_reg>; + vusb33-supply = <®_3p3v>; + vbus-supply = <®_5v>; status = "okay"; }; &usb2 { - vusb33-supply = <&mt6323_vusb_reg>; + vusb33-supply = <®_3p3v>; + vbus-supply = <®_5v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts index e66de86116509..f729c718aba1a 100644 --- a/arch/arm/boot/dts/mt7623n-rfb-nand.dts +++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts @@ -81,13 +81,13 @@ &pio { nand_pins_default: nanddefault { - pins_ale { + pins-ale { pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>; drive-strength = <MTK_DRIVE_8mA>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; - pins_dat { + pins-dat { pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>, <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>, <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>, @@ -102,7 +102,7 @@ bias-pull-up; }; - pins_we { + pins-we { pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>; drive-strength = <MTK_DRIVE_8mA>; bias-pull-up = <MTK_PUPD_SET_R1R0_10>; diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi new file mode 100644 index 0000000000000..d2d0761295a4f --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi @@ -0,0 +1,187 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018 Nuvoton Technology tomer.maimon@nuvoton.com +// Copyright 2018 Google, Inc. + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + /* external reference clock */ + clk_refclk: clk_refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "refclk"; + }; + + /* external reference clock for cpu. float in normal operation */ + clk_sysbypck: clk_sysbypck { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <800000000>; + clock-output-names = "sysbypck"; + }; + + /* external reference clock for MC. float in normal operation */ + clk_mcbypck: clk_mcbypck { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <800000000>; + clock-output-names = "mcbypck"; + }; + + /* external clock signal rg1refck, supplied by the phy */ + clk_rg1refck: clk_rg1refck { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "clk_rg1refck"; + }; + + /* external clock signal rg2refck, supplied by the phy */ + clk_rg2refck: clk_rg2refck { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "clk_rg2refck"; + }; + + clk_xin: clk_xin { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "clk_xin"; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges = <0x0 0xf0000000 0x00900000>; + + gcr: gcr@800000 { + compatible = "nuvoton,npcm750-gcr", "syscon", + "simple-mfd"; + reg = <0x800000 0x1000>; + }; + + scu: scu@3fe000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x3fe000 0x1000>; + }; + + l2: cache-controller@3fc000 { + compatible = "arm,pl310-cache"; + reg = <0x3fc000 0x1000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + cache-unified; + cache-level = <2>; + clocks = <&clk 10>; + arm,shared-override; + }; + + gic: interrupt-controller@3ff000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x3ff000 0x1000>, + <0x3fe100 0x100>; + }; + }; + + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + clk: clock-controller@f0801000 { + compatible = "nuvoton,npcm750-clk", "syscon"; + #clock-cells = <1>; + clock-controller; + reg = <0xf0801000 0x1000>; + clock-names = "refclk", "sysbypck", "mcbypck"; + clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges = <0x0 0xf0000000 0x00300000>; + + timer0: timer@8000 { + compatible = "nuvoton,npcm750-timer"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x8000 0x50>; + clocks = <&clk 5>; + }; + + watchdog0: watchdog@801C { + compatible = "nuvoton,npcm750-wdt"; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x801C 0x4>; + status = "disabled"; + clocks = <&clk 5>; + }; + + watchdog1: watchdog@901C { + compatible = "nuvoton,npcm750-wdt"; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x901C 0x4>; + status = "disabled"; + clocks = <&clk 5>; + }; + + watchdog2: watchdog@a01C { + compatible = "nuvoton,npcm750-wdt"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xa01C 0x4>; + status = "disabled"; + clocks = <&clk 5>; + }; + + serial0: serial@1000 { + compatible = "nuvoton,npcm750-uart"; + reg = <0x1000 0x1000>; + clocks = <&clk 6>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + + serial1: serial@2000 { + compatible = "nuvoton,npcm750-uart"; + reg = <0x2000 0x1000>; + clocks = <&clk 6>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + + serial2: serial@3000 { + compatible = "nuvoton,npcm750-uart"; + reg = <0x3000 0x1000>; + clocks = <&clk 6>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + + serial3: serial@4000 { + compatible = "nuvoton,npcm750-uart"; + reg = <0x4000 0x1000>; + clocks = <&clk 6>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts new file mode 100644 index 0000000000000..15f744f1beeaa --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018 Nuvoton Technology tomer.maimon@nuvoton.com +// Copyright 2018 Google, Inc. + +/dts-v1/; +#include "nuvoton-npcm750.dtsi" + +/ { + model = "Nuvoton npcm750 Development Board (Device Tree)"; + compatible = "nuvoton,npcm750"; + + chosen { + stdout-path = &serial3; + }; + + memory { + reg = <0 0x40000000>; + }; +}; + +&watchdog1 { + status = "okay"; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&serial3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton-npcm750.dtsi new file mode 100644 index 0000000000000..6ac3405335873 --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-npcm750.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018 Nuvoton Technology tomer.maimon@nuvoton.com +// Copyright 2018 Google, Inc. + +#include "nuvoton-common-npcm7xx.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "nuvoton,npcm750-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + clocks = <&clk 0>; + clock-names = "clk_cpu"; + reg = <0>; + next-level-cache = <&l2>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + clocks = <&clk 0>; + clock-names = "clk_cpu"; + reg = <1>; + next-level-cache = <&l2>; + }; + }; + soc { + timer@3fe600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x3fe600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&clk 5>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index e44d93fc644cc..ded5fcf084eb7 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -39,6 +39,13 @@ }; }; +&i2c3 { + ak8975@0f { + compatible = "asahi-kasei,ak8975"; + reg = <0x0f>; + }; +}; + &isp { vdd-csiphy1-supply = <&vaux2>; vdd-csiphy2-supply = <&vaux2>; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index a005802cd52bc..4043ecb380168 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -557,6 +557,7 @@ dma-names = "tx", "rx"; clocks = <&mcbsp4_fck>; clock-names = "fck"; + #sound-dai-cells = <0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index b21084da490b6..bdf73cbcec3a5 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -70,8 +70,30 @@ regulator-always-on; }; - /* HS USB Host PHY on PORT 1 */ - hsusb1_phy: hsusb1_phy { + /* FS USB Host PHY on port 1 for mdm6600 */ + fsusb1_phy: usb-phy@1 { + compatible = "motorola,mapphone-mdm6600"; + pinctrl-0 = <&usb_mdm6600_pins>; + pinctrl-names = "default"; + enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */ + power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */ + reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */ + /* mode: gpio_148 gpio_149 */ + motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, + <&gpio5 21 GPIO_ACTIVE_HIGH>; + /* cmd: gpio_103 gpio_104 gpio_142 */ + motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, + <&gpio4 8 GPIO_ACTIVE_HIGH>, + <&gpio5 14 GPIO_ACTIVE_HIGH>; + /* status: gpio_52 gpio_53 gpio_55 */ + motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, + <&gpio2 21 GPIO_ACTIVE_HIGH>, + <&gpio2 23 GPIO_ACTIVE_HIGH>; + #phy-cells = <0>; + }; + + /* HS USB host TLL nop-phy on port 2 for w3glte */ + hsusb2_phy: usb-phy@2 { compatible = "usb-nop-xceiv"; #phy-cells = <0>; }; @@ -117,6 +139,26 @@ }; }; + + soundcard { + compatible = "audio-graph-card"; + label = "Droid 4 Audio"; + + simple-graph-card,widgets = + "Speaker", "Earpiece", + "Speaker", "Loudspeaker", + "Headphone", "Headphone Jack", + "Microphone", "Internal Mic"; + + simple-graph-card,routing = + "Earpiece", "EP", + "Loudspeaker", "SPKR", + "Headphone Jack", "HSL", + "Headphone Jack", "HSR", + "MICR", "Internal Mic"; + + dais = <&mcbsp2_port>, <&mcbsp3_port>; + }; }; &dss { @@ -124,13 +166,6 @@ }; &gpio6 { - touchscreen_reset { - gpio-hog; - gpios = <13 0>; - output-high; - line-name = "touchscreen-reset"; - }; - pwm8: dmtimer-pwm-8 { pinctrl-names = "default"; pinctrl-0 = <&vibrator_direction_pin>; @@ -362,22 +397,18 @@ }; }; -/* - * REVISIT: Add gpio173 reset pin handling to the driver, see gpio-hog above. - * If the GPIO reset is used, we probably need to have /lib/firmware/maxtouch.fw - * available. See "mxt-app" and "droid4-touchscreen-firmware" tools for more - * information. - */ &i2c2 { - tsp@4a { + touchscreen@4a { compatible = "atmel,maxtouch"; reg = <0x4a>; pinctrl-names = "default"; pinctrl-0 = <&touchscreen_pins>; + reset-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio173 */ + /* gpio_183 with sys_nirq2 pad as wakeup */ - interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING - &omap4_pmx_core 0x160>; + interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING>, + <&omap4_pmx_core 0x160>; interrupt-names = "irq", "wakeup"; wakeup-source; }; @@ -435,6 +466,7 @@ touchscreen_pins: pinmux_touchscreen_pins { pinctrl-single,pins = < + OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3) >; }; @@ -445,6 +477,43 @@ >; }; + usb_mdm6600_pins: pinmux_usb_mdm6600_pins { + pinctrl-single,pins = < + /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */ + OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) + + /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */ + OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) + + /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */ + OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3) + + /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */ + OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) + + /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */ + OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) + + /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */ + OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) + + /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */ + OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) + + /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */ + OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) + + /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */ + OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) + + /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */ + OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) + + /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */ + OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) + >; + }; + usb_ulpi_pins: pinmux_usb_ulpi_pins { pinctrl-single,pins = < OMAP4_IOPAD(0x196, MUX_MODE7) @@ -484,6 +553,28 @@ >; }; + /* + * Note that the v3.0.8 stock userspace dynamically remuxes uart1 + * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7 + * when not used. If needed, we can add rts pin remux later based + * on power measurements. + */ + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + /* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */ + OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */ + OMAP4_IOPAD(0x13e, MUX_MODE1) + + /* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */ + OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1) + + /* 0x4a1001ca dpm_emu14.uart1_rx aa3 */ + OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; + /* uart3_tx_irtx and uart3_rx_irrx */ uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < @@ -512,6 +603,24 @@ OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5) /* uart4_rts */ >; }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx */ + OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_dr */ + OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0) /* abe_mcbsp2_dx */ + OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx */ + >; + }; + + mcbsp3_pins: pinmux_mcbsp3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_dr */ + OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1) /* abe_mcbsp3_dx */ + OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_clkx */ + OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */ + >; + }; }; &omap4_pmx_wkup { @@ -535,6 +644,17 @@ }; }; +/* + * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for + * uart1 wakeirq. + */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0xfc>; +}; + &uart3 { interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core 0x17c>; @@ -551,8 +671,13 @@ }; }; +&usbhsohci { + phys = <&fsusb1_phy>; + phy-names = "usb"; +}; + &usbhsehci { - phys = <&hsusb1_phy>; + phys = <&hsusb2_phy>; }; &usbhshost { @@ -597,3 +722,43 @@ "0", "0", "1"; }; }; + +&mcbsp2 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; + status = "okay"; + + mcbsp2_port: port { + cpu_dai2: endpoint { + dai-format = "i2s"; + remote-endpoint = <&cpcap_audio_codec0>; + frame-master = <&cpcap_audio_codec0>; + bitclock-master = <&cpcap_audio_codec0>; + }; + }; +}; + +&mcbsp3 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp3_pins>; + status = "okay"; + + mcbsp3_port: port { + cpu_dai3: endpoint { + dai-format = "dsp_a"; + frame-master = <&cpcap_audio_codec1>; + bitclock-master = <&cpcap_audio_codec1>; + remote-endpoint = <&cpcap_audio_codec1>; + }; + }; +}; + +&cpcap_audio_codec0 { + remote-endpoint = <&cpu_dai2>; +}; + +&cpcap_audio_codec1 { + remote-endpoint = <&cpu_dai3>; +}; diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi index 03c8ad91ddac9..cbcdcb4e7d1c2 100644 --- a/arch/arm/boot/dts/omap443x.dtsi +++ b/arch/arm/boot/dts/omap443x.dtsi @@ -24,8 +24,6 @@ clock-latency = <300000>; /* From legacy driver */ /* cooling options */ - cooling-min-level = <0>; - cooling-max-level = <3>; #cooling-cells = <2>; /* min followed by max */ }; }; diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi index c43f2a2d0a1e2..ad97493e4e468 100644 --- a/arch/arm/boot/dts/omap4460.dtsi +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -22,8 +22,6 @@ clock-latency = <300000>; /* From legacy driver */ /* cooling options */ - cooling-min-level = <0>; - cooling-max-level = <2>; #cooling-cells = <2>; /* min followed by max */ }; }; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 1b20838bb9a42..3b2244560c28f 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -659,8 +659,8 @@ v2v1-supply = <&smps9_reg>; enable-active-high; - clocks = <&clk32kgaudio>; - clock-names = "clk32k"; + clocks = <&clk32kgaudio>, <&fref_xtal_ck>; + clock-names = "clk32k", "mclk"; }; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 35d4298da83dd..732b61a0e9904 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -55,8 +55,6 @@ clock-latency = <300000>; /* From omap-cpufreq driver */ /* cooling options */ - cooling-min-level = <0>; - cooling-max-level = <2>; #cooling-cells = <2>; /* min followed by max */ }; cpu@1 { @@ -289,6 +287,28 @@ pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0x7fff>; }; + + omap5_scm_wkup_pad_conf: omap5_scm_wkup_pad_conf@cda0 { + compatible = "ti,omap5-scm-wkup-pad-conf", + "simple-bus"; + reg = <0xcda0 0x60>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xcda0 0x60>; + + scm_wkup_pad_conf: scm_conf@0 { + compatible = "syscon", "simple-bus"; + reg = <0x0 0x60>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x60>; + + scm_wkup_pad_conf_clocks: clocks@0 { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; }; ocmcram: ocmcram@40300000 { diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index 9619a746d6573..ecc5573d264cb 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -1179,3 +1179,13 @@ }; }; }; + +&scm_wkup_pad_conf_clocks { + fref_xtal_ck: fref_xtal_ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&sys_clkin>; + ti,bit-shift = <28>; + reg = <0x14>; + }; +}; diff --git a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts index c701e8d16bbb6..8c2449da6f009 100644 --- a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts +++ b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts @@ -24,7 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; - linux,stdout-path = &uart0; + stdout-path = &uart0; }; soc { diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts index 89ff404a528c7..b545d0f228a52 100644 --- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -30,7 +30,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; - linux,stdout-path = &uart0; + stdout-path = &uart0; }; soc { diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/orion5x-linkstation.dtsi index e9991c83d7b70..ebd93df5d07a8 100644 --- a/arch/arm/boot/dts/orion5x-linkstation.dtsi +++ b/arch/arm/boot/dts/orion5x-linkstation.dtsi @@ -48,7 +48,7 @@ / { chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; - linux,stdout-path = &uart0; + stdout-path = &uart0; }; soc { diff --git a/arch/arm/boot/dts/orion5x-lswsgl.dts b/arch/arm/boot/dts/orion5x-lswsgl.dts index ea966ec03dd0b..0d97ded66257f 100644 --- a/arch/arm/boot/dts/orion5x-lswsgl.dts +++ b/arch/arm/boot/dts/orion5x-lswsgl.dts @@ -60,7 +60,7 @@ chosen { bootargs = "console=ttyS0,115200 earlyprintk"; - linux,stdout-path = &uart0; + stdout-path = &uart0; }; soc { diff --git a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts index ff34849042948..0324cb54939d4 100644 --- a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts +++ b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts @@ -24,7 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; - linux,stdout-path = &uart0; + stdout-path = &uart0; }; soc { diff --git a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts index 6fb052507b369..d1817af53e0bb 100644 --- a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts +++ b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts @@ -21,7 +21,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; - linux,stdout-path = &uart0; + stdout-path = &uart0; }; soc { diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts index 1297414dd649a..0c9729306089a 100644 --- a/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts +++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts @@ -23,7 +23,7 @@ }; chosen { - linux,stdout-path = &uart0; + stdout-path = &uart0; }; clocks { diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts index 9e317a4f431cc..86f26715b619a 100644 --- a/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts +++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts @@ -23,7 +23,7 @@ }; chosen { - linux,stdout-path = &uart0; + stdout-path = &uart0; }; clocks { diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index b818ebce09789..209eb21cea008 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -133,7 +133,7 @@ clock-frequency = <200000>; eeprom@50 { - compatible = "24c02"; + compatible = "atmel,24c02"; reg = <0x50>; pagesize = <32>; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 3ca96e3618787..5341a39c03927 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -316,6 +316,23 @@ }; }; + + /* + * These channels from the ADC are simply hardware monitors. + * That is why the ADC is referred to as "HKADC" - HouseKeeping + * ADC. + */ + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&xoadc 0x00 0x01>, /* Battery */ + <&xoadc 0x00 0x02>, /* DC in (charger) */ + <&xoadc 0x00 0x04>, /* VPH the main system voltage */ + <&xoadc 0x00 0x0b>, /* Die temperature */ + <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ + <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ + <&xoadc 0x00 0x0e>; /* Charger temperature */ + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -770,6 +787,52 @@ debounce = <15625>; pull-up; }; + + xoadc: xoadc@197 { + compatible = "qcom,pm8921-adc"; + reg = <197>; + interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>; + #address-cells = <2>; + #size-cells = <0>; + #io-channel-cells = <2>; + + vcoin: adc-channel@00 { + reg = <0x00 0x00>; + }; + vbat: adc-channel@01 { + reg = <0x00 0x01>; + }; + dcin: adc-channel@02 { + reg = <0x00 0x02>; + }; + vph_pwr: adc-channel@04 { + reg = <0x00 0x04>; + }; + batt_therm: adc-channel@08 { + reg = <0x00 0x08>; + }; + batt_id: adc-channel@09 { + reg = <0x00 0x09>; + }; + usb_vbus: adc-channel@0a { + reg = <0x00 0x0a>; + }; + die_temp: adc-channel@0b { + reg = <0x00 0x0b>; + }; + ref_625mv: adc-channel@0c { + reg = <0x00 0x0c>; + }; + ref_1250mv: adc-channel@0d { + reg = <0x00 0x0d>; + }; + chg_temp: adc-channel@0e { + reg = <0x00 0x0e>; + }; + ref_muxoff: adc-channel@0f { + reg = <0x00 0x0f>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts new file mode 100644 index 0000000000000..eaa1001d0a46a --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" + +/ { + model = "Samsung Galaxy S5"; + compatible = "samsung,klte", "qcom,msm8974"; + + aliases { + serial0 = &blsp1_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&soc { + serial@f991e000 { + status = "ok"; + }; + +}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts index e87f2c99060d4..701b396719c74 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts @@ -491,7 +491,7 @@ pinctrl-0 = <&i2c8_pins>; synaptics@2c { - compatible = "syna,rmi-i2c"; + compatible = "syna,rmi4-i2c"; reg = <0x2c>; interrupt-parent = <&msmgpio>; @@ -506,6 +506,8 @@ pinctrl-names = "default"; pinctrl-0 = <&ts_int_pin>; + syna,startup-delay-ms = <10>; + rmi-f01@1 { reg = <0x1>; syna,nosleep = <1>; diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi index 75a8ca5718463..1d3e9503c5bdb 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi +++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi @@ -34,6 +34,10 @@ }; }; +&cmt0 { + status = "okay"; +}; + &extal_clk { clock-frequency = <20000000>; }; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 0b74c6c7d21d2..1d9073ba0ce04 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -141,29 +141,6 @@ #size-cells = <2>; ranges; - apmu@e6152000 { - compatible = "renesas,r8a7743-apmu", "renesas,apmu"; - reg = <0 0xe6152000 0 0x188>; - cpus = <&cpu0 &cpu1>; - }; - - gic: interrupt-controller@f1001000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x2000>, - <0 0xf1004000 0 0x2000>, - <0 0xf1006000 0 0x2000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_HIGH)>; - clocks = <&cpg CPG_MOD 408>; - clock-names = "clk"; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 408>; - }; - gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7743", "renesas,rcar-gen2-gpio"; @@ -284,6 +261,48 @@ resets = <&cpg 904>; }; + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a7743"; + reg = <0 0xe6060000 0 0x250>; + }; + + tpu: pwm@e60f0000 { + compatible = "renesas,tpu-r8a7743", "renesas,tpu"; + reg = <0 0xe60f0000 0 0x148>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7743-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + apmu@e6152000 { + compatible = "renesas,r8a7743-apmu", "renesas,apmu"; + reg = <0 0xe6152000 0 0x188>; + cpus = <&cpu0 &cpu1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7743-rst"; + reg = <0 0xe6160000 0 0x100>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7743-sysc"; + reg = <0 0xe6180000 0 0x200>; + #power-domain-cells = <1>; + }; + irqc: interrupt-controller@e61c0000 { compatible = "renesas,irqc-r8a7743", "renesas,irqc"; #interrupt-cells = <2>; @@ -316,227 +335,89 @@ #thermal-sensor-cells = <0>; }; - cmt0: timer@ffca0000 { - compatible = "renesas,r8a7743-cmt0", - "renesas,rcar-gen2-cmt0"; - reg = <0 0xffca0000 0 0x1004>; - interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 124>; - clock-names = "fck"; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 124>; + ipmmu_sy0: mmu@e6280000 { + compatible = "renesas,ipmmu-r8a7743", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6280000 0 0x1000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; status = "disabled"; }; - cmt1: timer@e6130000 { - compatible = "renesas,r8a7743-cmt1", - "renesas,rcar-gen2-cmt1"; - reg = <0 0xe6130000 0 0x1004>; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 329>; - clock-names = "fck"; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 329>; + ipmmu_sy1: mmu@e6290000 { + compatible = "renesas,ipmmu-r8a7743", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6290000 0 0x1000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; status = "disabled"; }; - cpg: clock-controller@e6150000 { - compatible = "renesas,r8a7743-cpg-mssr"; - reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>, <&usb_extal_clk>; - clock-names = "extal", "usb_extal"; - #clock-cells = <2>; - #power-domain-cells = <0>; - #reset-cells = <1>; - }; - - prr: chipid@ff000044 { - compatible = "renesas,prr"; - reg = <0 0xff000044 0 4>; - }; - - rst: reset-controller@e6160000 { - compatible = "renesas,r8a7743-rst"; - reg = <0 0xe6160000 0 0x100>; - }; - - sysc: system-controller@e6180000 { - compatible = "renesas,r8a7743-sysc"; - reg = <0 0xe6180000 0 0x200>; - #power-domain-cells = <1>; + ipmmu_ds: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a7743", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6740000 0 0x1000>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; }; - pfc: pin-controller@e6060000 { - compatible = "renesas,pfc-r8a7743"; - reg = <0 0xe6060000 0 0x250>; + ipmmu_mp: mmu@ec680000 { + compatible = "renesas,ipmmu-r8a7743", + "renesas,ipmmu-vmsa"; + reg = <0 0xec680000 0 0x1000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; }; - dmac0: dma-controller@e6700000 { - compatible = "renesas,dmac-r8a7743", - "renesas,rcar-dmac"; - reg = <0 0xe6700000 0 0x20000>; - interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12", "ch13", "ch14"; - clocks = <&cpg CPG_MOD 219>; - clock-names = "fck"; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 219>; - #dma-cells = <1>; - dma-channels = <15>; + ipmmu_mx: mmu@fe951000 { + compatible = "renesas,ipmmu-r8a7743", + "renesas,ipmmu-vmsa"; + reg = <0 0xfe951000 0 0x1000>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; }; - dmac1: dma-controller@e6720000 { - compatible = "renesas,dmac-r8a7743", - "renesas,rcar-dmac"; - reg = <0 0xe6720000 0 0x20000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12", "ch13", "ch14"; - clocks = <&cpg CPG_MOD 218>; - clock-names = "fck"; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 218>; - #dma-cells = <1>; - dma-channels = <15>; + ipmmu_gp: mmu@e62a0000 { + compatible = "renesas,ipmmu-r8a7743", + "renesas,ipmmu-vmsa"; + reg = <0 0xe62a0000 0 0x1000>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; }; - audma0: dma-controller@ec700000 { - compatible = "renesas,dmac-r8a7743", - "renesas,rcar-dmac"; - reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12"; - clocks = <&cpg CPG_MOD 502>; - clock-names = "fck"; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 502>; - #dma-cells = <1>; - dma-channels = <13>; + icram0: sram@e63a0000 { + compatible = "mmio-sram"; + reg = <0 0xe63a0000 0 0x12000>; }; - audma1: dma-controller@ec720000 { - compatible = "renesas,dmac-r8a7743", - "renesas,rcar-dmac"; - reg = <0 0xec720000 0 0x10000>; - interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12"; - clocks = <&cpg CPG_MOD 501>; - clock-names = "fck"; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 501>; - #dma-cells = <1>; - dma-channels = <13>; - }; + icram1: sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0 0xe63c0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63c0000 0x1000>; - usb_dmac0: dma-controller@e65a0000 { - compatible = "renesas,r8a7743-usb-dmac", - "renesas,usb-dmac"; - reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "ch0", "ch1"; - clocks = <&cpg CPG_MOD 330>; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 330>; - #dma-cells = <1>; - dma-channels = <2>; + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x10>; + }; }; - usb_dmac1: dma-controller@e65b0000 { - compatible = "renesas,r8a7743-usb-dmac", - "renesas,usb-dmac"; - reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "ch0", "ch1"; - clocks = <&cpg CPG_MOD 331>; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 331>; - #dma-cells = <1>; - dma-channels = <2>; + icram2: sram@e6300000 { + compatible = "mmio-sram"; + reg = <0 0xe6300000 0 0x40000>; }; - /* The memory map in the User's Manual maps the cores to bus - * numbers + /* The memory map in the User's Manual maps the cores to + * bus numbers */ i2c0: i2c@e6508000 { #address-cells = <1>; @@ -675,6 +556,168 @@ status = "disabled"; }; + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7743", + "renesas,rcar-gen2-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 704>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + status = "disabled"; + }; + + usbphy: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7743", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 704>; + clock-names = "usbhs"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; + + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a7743-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a7743-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a7743", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,dmac-r8a7743", + "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7743", + "renesas,etheravb-rcar-gen2"; + reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 812>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7743", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 917>; + status = "disabled"; + }; + scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a7743", "renesas,rcar-gen2-scifa", "renesas,scifa"; @@ -954,88 +997,6 @@ status = "disabled"; }; - icram2: sram@e6300000 { - compatible = "mmio-sram"; - reg = <0 0xe6300000 0 0x40000>; - }; - - icram0: sram@e63a0000 { - compatible = "mmio-sram"; - reg = <0 0xe63a0000 0 0x12000>; - }; - - icram1: sram@e63c0000 { - compatible = "mmio-sram"; - reg = <0 0xe63c0000 0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0xe63c0000 0x1000>; - - smp-sram@0 { - compatible = "renesas,smp-sram"; - reg = <0 0x10>; - }; - }; - - ether: ethernet@ee700000 { - compatible = "renesas,ether-r8a7743", - "renesas,rcar-gen2-ether"; - reg = <0 0xee700000 0 0x400>; - interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 813>; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 813>; - phy-mode = "rmii"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - avb: ethernet@e6800000 { - compatible = "renesas,etheravb-r8a7743", - "renesas,etheravb-rcar-gen2"; - reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; - interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 812>; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 812>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - mmcif0: mmc@ee200000 { - compatible = "renesas,mmcif-r8a7743", - "renesas,sh-mmcif"; - reg = <0 0xee200000 0 0x80>; - interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 315>; - dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, - <&dmac1 0xd1>, <&dmac1 0xd2>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 315>; - reg-io-width = <4>; - max-frequency = <97500000>; - status = "disabled"; - }; - - qspi: spi@e6b10000 { - compatible = "renesas,qspi-r8a7743", "renesas,qspi"; - reg = <0 0xe6b10000 0 0x2c>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 917>; - dmas = <&dmac0 0x17>, <&dmac0 0x18>, - <&dmac1 0x17>, <&dmac1 0x18>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - resets = <&cpg 917>; - status = "disabled"; - }; - msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7743", "renesas,rcar-gen2-msiof"; @@ -1084,26 +1045,6 @@ status = "disabled"; }; - /* - * pci1 and xhci share the same phy, therefore only one of them - * can be active at any one time. If both of them are enabled, - * a race condition will determine who'll control the phy. - * A firmware file is needed by the xhci driver in order for - * USB 3.0 to work properly. - */ - xhci: usb@ee000000 { - compatible = "renesas,xhci-r8a7743", - "renesas,rcar-gen2-xhci"; - reg = <0 0xee000000 0 0xc00>; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 328>; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 328>; - phys = <&usb2 1>; - phy-names = "usb"; - status = "disabled"; - }; - pwm0: pwm@e6e30000 { compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar"; reg = <0 0xe6e30000 0 0x8>; @@ -1174,98 +1115,32 @@ status = "disabled"; }; - tpu: pwm@e60f0000 { - compatible = "renesas,tpu-r8a7743", "renesas,tpu"; - reg = <0 0xe60f0000 0 0x148>; - clocks = <&cpg CPG_MOD 304>; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 304>; - #pwm-cells = <3>; - status = "disabled"; - }; - - sdhi0: sd@ee100000 { - compatible = "renesas,sdhi-r8a7743", - "renesas,rcar-gen2-sdhi"; - reg = <0 0xee100000 0 0x328>; - interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 314>; - dmas = <&dmac0 0xcd>, <&dmac0 0xce>, - <&dmac1 0xcd>, <&dmac1 0xce>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <195000000>; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 314>; - status = "disabled"; - }; - - sdhi1: sd@ee140000 { - compatible = "renesas,sdhi-r8a7743", - "renesas,rcar-gen2-sdhi"; - reg = <0 0xee140000 0 0x100>; - interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 312>; - dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, - <&dmac1 0xc1>, <&dmac1 0xc2>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <97500000>; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 312>; - status = "disabled"; - }; - - sdhi2: sd@ee160000 { - compatible = "renesas,sdhi-r8a7743", - "renesas,rcar-gen2-sdhi"; - reg = <0 0xee160000 0 0x100>; - interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 311>; - dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, - <&dmac1 0xd3>, <&dmac1 0xd4>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <97500000>; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 311>; - status = "disabled"; - }; - - hsusb: usb@e6590000 { - compatible = "renesas,usbhs-r8a7743", - "renesas,rcar-gen2-usbhs"; - reg = <0 0xe6590000 0 0x100>; - interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 704>; - dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, - <&usb_dmac1 0>, <&usb_dmac1 1>; - dma-names = "ch0", "ch1", "ch2", "ch3"; + can0: can@e6e80000 { + compatible = "renesas,can-r8a7743", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e80000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A7743_CLK_RCAN>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 704>; - renesas,buswait = <4>; - phys = <&usb0 1>; - phy-names = "usb"; + resets = <&cpg 916>; status = "disabled"; }; - usbphy: usb-phy@e6590100 { - compatible = "renesas,usb-phy-r8a7743", - "renesas,rcar-gen2-usb-phy"; - reg = <0 0xe6590100 0 0x100>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&cpg CPG_MOD 704>; - clock-names = "usbhs"; + can1: can@e6e88000 { + compatible = "renesas,can-r8a7743", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e88000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A7743_CLK_RCAN>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 704>; + resets = <&cpg 915>; status = "disabled"; - - usb0: usb-channel@0 { - reg = <0>; - #phy-cells = <1>; - }; - usb2: usb-channel@2 { - reg = <2>; - #phy-cells = <1>; - }; }; vin0: video@e6ef0000 { @@ -1301,162 +1176,6 @@ status = "disabled"; }; - du: display@feb00000 { - compatible = "renesas,du-r8a7743"; - reg = <0 0xfeb00000 0 0x40000>, - <0 0xfeb90000 0 0x1c>; - reg-names = "du", "lvds.0"; - interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 726>; - clock-names = "du.0", "du.1", "lvds.0"; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - du_out_rgb: endpoint { - }; - }; - port@1 { - reg = <1>; - du_out_lvds0: endpoint { - }; - }; - }; - }; - - can0: can@e6e80000 { - compatible = "renesas,can-r8a7743", - "renesas,rcar-gen2-can"; - reg = <0 0xe6e80000 0 0x1000>; - interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 916>, - <&cpg CPG_CORE R8A7743_CLK_RCAN>, - <&can_clk>; - clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 916>; - status = "disabled"; - }; - - can1: can@e6e88000 { - compatible = "renesas,can-r8a7743", - "renesas,rcar-gen2-can"; - reg = <0 0xe6e88000 0 0x1000>; - interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 915>, - <&cpg CPG_CORE R8A7743_CLK_RCAN>, - <&can_clk>; - clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 915>; - status = "disabled"; - }; - - pci0: pci@ee090000 { - compatible = "renesas,pci-r8a7743", - "renesas,pci-rcar-gen2"; - device_type = "pci"; - reg = <0 0xee090000 0 0xc00>, - <0 0xee080000 0 0x1100>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 703>; - status = "disabled"; - - bus-range = <0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - - usb@1,0 { - reg = <0x800 0 0 0 0>; - phys = <&usb0 0>; - phy-names = "usb"; - }; - - usb@2,0 { - reg = <0x1000 0 0 0 0>; - phys = <&usb0 0>; - phy-names = "usb"; - }; - }; - - pci1: pci@ee0d0000 { - compatible = "renesas,pci-r8a7743", - "renesas,pci-rcar-gen2"; - device_type = "pci"; - reg = <0 0xee0d0000 0 0xc00>, - <0 0xee0c0000 0 0x1100>; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 703>; - status = "disabled"; - - bus-range = <1 1>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - - usb@1,0 { - reg = <0x10800 0 0 0 0>; - phys = <&usb2 0>; - phy-names = "usb"; - }; - - usb@2,0 { - reg = <0x11000 0 0 0 0>; - phys = <&usb2 0>; - phy-names = "usb"; - }; - }; - - pciec: pcie@fe000000 { - compatible = "renesas,pcie-r8a7743", - "renesas,pcie-rcar-gen2"; - reg = <0 0xfe000000 0 0x80000>; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x00 0xff>; - device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 - 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; - clock-names = "pcie", "pcie_bus"; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 319>; - status = "disabled"; - }; - rcar_sound: sound@ec500000 { /* * #sound-dai-cells is required @@ -1641,6 +1360,369 @@ }; }; }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a7743", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <13>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a7743", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <13>; + }; + + /* + * pci1 and xhci share the same phy, therefore only one of them + * can be active at any one time. If both of them are enabled, + * a race condition will determine who'll control the phy. + * A firmware file is needed by the xhci driver in order for + * USB 3.0 to work properly. + */ + xhci: usb@ee000000 { + compatible = "renesas,xhci-r8a7743", + "renesas,rcar-gen2-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 328>; + phys = <&usb2 1>; + phy-names = "usb"; + status = "disabled"; + }; + + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7743", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + }; + + pci1: pci@ee0d0000 { + compatible = "renesas,pci-r8a7743", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x10800 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x11000 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7743", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee100000 0 0x328>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee140000 { + compatible = "renesas,sdhi-r8a7743", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi2: sd@ee160000 { + compatible = "renesas,sdhi-r8a7743", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee160000 0 0x100>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; + + mmcif0: mmc@ee200000 { + compatible = "renesas,mmcif-r8a7743", + "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 315>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 315>; + reg-io-width = <4>; + max-frequency = <97500000>; + status = "disabled"; + }; + + ether: ethernet@ee700000 { + compatible = "renesas,ether-r8a7743", + "renesas,rcar-gen2-ether"; + reg = <0 0xee700000 0 0x400>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 813>; + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>, + <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + + pciec: pcie@fe000000 { + compatible = "renesas,pcie-r8a7743", + "renesas,pcie-rcar-gen2"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 + 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + + vsp@fe928000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe928000 0 0x8000>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 131>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 131>; + }; + + vsp@fe930000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe930000 0 0x8000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 128>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 128>; + }; + + vsp@fe938000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe938000 0 0x8000>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 127>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 127>; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a7743"; + reg = <0 0xfeb00000 0 0x40000>, + <0 0xfeb90000 0 0x1c>; + reg-names = "du", "lvds.0"; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 726>; + clock-names = "du.0", "du.1", "lvds.0"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + }; + }; + }; + }; + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; + + cmt0: timer@ffca0000 { + compatible = "renesas,r8a7743-cmt0", + "renesas,rcar-gen2-cmt0"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a7743-cmt1", + "renesas,rcar-gen2-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 329>; + clock-names = "fck"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 329>; + status = "disabled"; + }; }; thermal-zones { diff --git a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi index ed9a8cf3fe36c..8d0a392b68111 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi +++ b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi @@ -29,6 +29,10 @@ }; }; +&cmt0 { + status = "okay"; +}; + &extal_clk { clock-frequency = <20000000>; }; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index ae918e9cce210..dd49a8b48f3e5 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -121,29 +121,6 @@ #size-cells = <2>; ranges; - apmu@e6151000 { - compatible = "renesas,r8a7745-apmu", "renesas,apmu"; - reg = <0 0xe6151000 0 0x188>; - cpus = <&cpu0 &cpu1>; - }; - - gic: interrupt-controller@f1001000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x2000>, - <0 0xf1004000 0 0x2000>, - <0 0xf1006000 0 0x2000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_HIGH)>; - clocks = <&cpg CPG_MOD 408>; - clock-names = "clk"; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 408>; - }; - gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7745", "renesas,rcar-gen2-gpio"; @@ -249,6 +226,48 @@ resets = <&cpg 905>; }; + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a7745"; + reg = <0 0xe6060000 0 0x11c>; + }; + + tpu: pwm@e60f0000 { + compatible = "renesas,tpu-r8a7745", "renesas,tpu"; + reg = <0 0xe60f0000 0 0x148>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7745-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + apmu@e6151000 { + compatible = "renesas,r8a7745-apmu", "renesas,apmu"; + reg = <0 0xe6151000 0 0x188>; + cpus = <&cpu0 &cpu1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7745-rst"; + reg = <0 0xe6160000 0 0x100>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7745-sysc"; + reg = <0 0xe6180000 0 0x200>; + #power-domain-cells = <1>; + }; + irqc: interrupt-controller@e61c0000 { compatible = "renesas,irqc-r8a7745", "renesas,irqc"; #interrupt-cells = <2>; @@ -269,67 +288,269 @@ resets = <&cpg 407>; }; - cmt0: timer@ffca0000 { - compatible = "renesas,r8a7745-cmt0", - "renesas,rcar-gen2-cmt0"; - reg = <0 0xffca0000 0 0x1004>; - interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 124>; - clock-names = "fck"; + ipmmu_sy0: mmu@e6280000 { + compatible = "renesas,ipmmu-r8a7745", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6280000 0 0x1000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_sy1: mmu@e6290000 { + compatible = "renesas,ipmmu-r8a7745", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6290000 0 0x1000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_ds: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a7745", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6740000 0 0x1000>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mp: mmu@ec680000 { + compatible = "renesas,ipmmu-r8a7745", + "renesas,ipmmu-vmsa"; + reg = <0 0xec680000 0 0x1000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_mx: mmu@fe951000 { + compatible = "renesas,ipmmu-r8a7745", + "renesas,ipmmu-vmsa"; + reg = <0 0xfe951000 0 0x1000>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + ipmmu_gp: mmu@e62a0000 { + compatible = "renesas,ipmmu-r8a7745", + "renesas,ipmmu-vmsa"; + reg = <0 0xe62a0000 0 0x1000>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; + + icram0: sram@e63a0000 { + compatible = "mmio-sram"; + reg = <0 0xe63a0000 0 0x12000>; + }; + + icram1: sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0 0xe63c0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63c0000 0x1000>; + + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x10>; + }; + }; + + icram2: sram@e6300000 { + compatible = "mmio-sram"; + reg = <0 0xe6300000 0 0x40000>; + }; + i2c0: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7745", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 124>; + resets = <&cpg 931>; + i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; - cmt1: timer@e6130000 { - compatible = "renesas,r8a7745-cmt1", - "renesas,rcar-gen2-cmt1"; - reg = <0 0xe6130000 0 0x1004>; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 329>; - clock-names = "fck"; + i2c1: i2c@e6518000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7745", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6518000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 329>; + resets = <&cpg 930>; + i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; - cpg: clock-controller@e6150000 { - compatible = "renesas,r8a7745-cpg-mssr"; - reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>, <&usb_extal_clk>; - clock-names = "extal", "usb_extal"; - #clock-cells = <2>; - #power-domain-cells = <0>; - #reset-cells = <1>; + i2c2: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7745", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6530000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 929>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; }; - prr: chipid@ff000044 { - compatible = "renesas,prr"; - reg = <0 0xff000044 0 4>; + i2c3: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7745", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6540000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 928>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; }; - rst: reset-controller@e6160000 { - compatible = "renesas,r8a7745-rst"; - reg = <0 0xe6160000 0 0x100>; + i2c4: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7745", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6520000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 927>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; }; - sysc: system-controller@e6180000 { - compatible = "renesas,r8a7745-sysc"; - reg = <0 0xe6180000 0 0x200>; - #power-domain-cells = <1>; + i2c5: i2c@e6528000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7745", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6528000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 925>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 925>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; }; - pfc: pin-controller@e6060000 { - compatible = "renesas,pfc-r8a7745"; - reg = <0 0xe6060000 0 0x11c>; + iic0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7745", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; + + iic1: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7745", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 323>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 323>; + status = "disabled"; + }; + + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7745", + "renesas,rcar-gen2-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 704>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + status = "disabled"; + }; + + usbphy: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7745", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 704>; + clock-names = "usbhs"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; + + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a7745-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a7745-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; }; dmac0: dma-controller@e6700000 { @@ -353,10 +574,10 @@ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12", "ch13", "ch14"; + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; @@ -386,75 +607,45 @@ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12", "ch13", "ch14"; - clocks = <&cpg CPG_MOD 218>; - clock-names = "fck"; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 218>; - #dma-cells = <1>; - dma-channels = <15>; - }; - - audma0: dma-controller@ec700000 { - compatible = "renesas,dmac-r8a7745", - "renesas,rcar-dmac"; - reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", - "ch12"; - clocks = <&cpg CPG_MOD 502>; + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 502>; + resets = <&cpg 218>; #dma-cells = <1>; - dma-channels = <13>; + dma-channels = <15>; }; - usb_dmac0: dma-controller@e65a0000 { - compatible = "renesas,r8a7745-usb-dmac", - "renesas,usb-dmac"; - reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "ch0", "ch1"; - clocks = <&cpg CPG_MOD 330>; + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7745", + "renesas,etheravb-rcar-gen2"; + reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 330>; - #dma-cells = <1>; - dma-channels = <2>; + resets = <&cpg 812>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - usb_dmac1: dma-controller@e65b0000 { - compatible = "renesas,r8a7745-usb-dmac", - "renesas,usb-dmac"; - reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "ch0", "ch1"; - clocks = <&cpg CPG_MOD 331>; + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7745", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 331>; - #dma-cells = <1>; - dma-channels = <2>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 917>; + status = "disabled"; }; scifa0: serial@e6c40000 { @@ -736,255 +927,6 @@ status = "disabled"; }; - icram2: sram@e6300000 { - compatible = "mmio-sram"; - reg = <0 0xe6300000 0 0x40000>; - }; - - icram0: sram@e63a0000 { - compatible = "mmio-sram"; - reg = <0 0xe63a0000 0 0x12000>; - }; - - icram1: sram@e63c0000 { - compatible = "mmio-sram"; - reg = <0 0xe63c0000 0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0xe63c0000 0x1000>; - - smp-sram@0 { - compatible = "renesas,smp-sram"; - reg = <0 0x10>; - }; - }; - - ether: ethernet@ee700000 { - compatible = "renesas,ether-r8a7745", - "renesas,rcar-gen2-ether"; - reg = <0 0xee700000 0 0x400>; - interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 813>; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 813>; - phy-mode = "rmii"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - avb: ethernet@e6800000 { - compatible = "renesas,etheravb-r8a7745", - "renesas,etheravb-rcar-gen2"; - reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; - interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 812>; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 812>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c0: i2c@e6508000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7745", - "renesas,rcar-gen2-i2c"; - reg = <0 0xe6508000 0 0x40>; - interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 931>; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 931>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; - - i2c1: i2c@e6518000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7745", - "renesas,rcar-gen2-i2c"; - reg = <0 0xe6518000 0 0x40>; - interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 930>; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 930>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; - - i2c2: i2c@e6530000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7745", - "renesas,rcar-gen2-i2c"; - reg = <0 0xe6530000 0 0x40>; - interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 929>; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 929>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; - - i2c3: i2c@e6540000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7745", - "renesas,rcar-gen2-i2c"; - reg = <0 0xe6540000 0 0x40>; - interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 928>; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 928>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; - - i2c4: i2c@e6520000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7745", - "renesas,rcar-gen2-i2c"; - reg = <0 0xe6520000 0 0x40>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 927>; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 927>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; - - i2c5: i2c@e6528000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7745", - "renesas,rcar-gen2-i2c"; - reg = <0 0xe6528000 0 0x40>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 925>; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 925>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; - - iic0: i2c@e6500000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,iic-r8a7745", - "renesas,rcar-gen2-iic", - "renesas,rmobile-iic"; - reg = <0 0xe6500000 0 0x425>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 318>; - dmas = <&dmac0 0x61>, <&dmac0 0x62>, - <&dmac1 0x61>, <&dmac1 0x62>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 318>; - status = "disabled"; - }; - - iic1: i2c@e6510000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,iic-r8a7745", - "renesas,rcar-gen2-iic", - "renesas,rmobile-iic"; - reg = <0 0xe6510000 0 0x425>; - interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 323>; - dmas = <&dmac0 0x65>, <&dmac0 0x66>, - <&dmac1 0x65>, <&dmac1 0x66>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 323>; - status = "disabled"; - }; - - mmcif0: mmc@ee200000 { - compatible = "renesas,mmcif-r8a7745", - "renesas,sh-mmcif"; - reg = <0 0xee200000 0 0x80>; - interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 315>; - dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, - <&dmac1 0xd1>, <&dmac1 0xd2>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 315>; - reg-io-width = <4>; - max-frequency = <97500000>; - status = "disabled"; - }; - - qspi: spi@e6b10000 { - compatible = "renesas,qspi-r8a7745", "renesas,qspi"; - reg = <0 0xe6b10000 0 0x2c>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 917>; - dmas = <&dmac0 0x17>, <&dmac0 0x18>, - <&dmac1 0x17>, <&dmac1 0x18>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - resets = <&cpg 917>; - status = "disabled"; - }; - - vin0: video@e6ef0000 { - compatible = "renesas,vin-r8a7745", - "renesas,rcar-gen2-vin"; - reg = <0 0xe6ef0000 0 0x1000>; - interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 811>; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 811>; - status = "disabled"; - }; - - vin1: video@e6ef1000 { - compatible = "renesas,vin-r8a7745", - "renesas,rcar-gen2-vin"; - reg = <0 0xe6ef1000 0 0x1000>; - interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 810>; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 810>; - status = "disabled"; - }; - - du: display@feb00000 { - compatible = "renesas,du-r8a7745"; - reg = <0 0xfeb00000 0 0x40000>; - reg-names = "du"; - interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; - clock-names = "du.0", "du.1"; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - du_out_rgb0: endpoint { - }; - }; - port@1 { - reg = <1>; - du_out_rgb1: endpoint { - }; - }; - }; - }; - msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7745", "renesas,rcar-gen2-msiof"; @@ -1103,170 +1045,6 @@ status = "disabled"; }; - tpu: pwm@e60f0000 { - compatible = "renesas,tpu-r8a7745", "renesas,tpu"; - reg = <0 0xe60f0000 0 0x148>; - clocks = <&cpg CPG_MOD 304>; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 304>; - #pwm-cells = <3>; - status = "disabled"; - }; - - sdhi0: sd@ee100000 { - compatible = "renesas,sdhi-r8a7745", - "renesas,rcar-gen2-sdhi"; - reg = <0 0xee100000 0 0x328>; - interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 314>; - dmas = <&dmac0 0xcd>, <&dmac0 0xce>, - <&dmac1 0xcd>, <&dmac1 0xce>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <195000000>; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 314>; - status = "disabled"; - }; - - sdhi1: sd@ee140000 { - compatible = "renesas,sdhi-r8a7745", - "renesas,rcar-gen2-sdhi"; - reg = <0 0xee140000 0 0x100>; - interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 312>; - dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, - <&dmac1 0xc1>, <&dmac1 0xc2>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <97500000>; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 312>; - status = "disabled"; - }; - - sdhi2: sd@ee160000 { - compatible = "renesas,sdhi-r8a7745", - "renesas,rcar-gen2-sdhi"; - reg = <0 0xee160000 0 0x100>; - interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 311>; - dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, - <&dmac1 0xd3>, <&dmac1 0xd4>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <97500000>; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 311>; - status = "disabled"; - }; - - pci0: pci@ee090000 { - compatible = "renesas,pci-r8a7745", - "renesas,pci-rcar-gen2"; - device_type = "pci"; - reg = <0 0xee090000 0 0xc00>, - <0 0xee080000 0 0x1100>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 703>; - status = "disabled"; - - bus-range = <0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - - usb@1,0 { - reg = <0x800 0 0 0 0>; - phys = <&usb0 0>; - phy-names = "usb"; - }; - - usb@2,0 { - reg = <0x1000 0 0 0 0>; - phys = <&usb0 0>; - phy-names = "usb"; - }; - }; - - pci1: pci@ee0d0000 { - compatible = "renesas,pci-r8a7745", - "renesas,pci-rcar-gen2"; - device_type = "pci"; - reg = <0 0xee0d0000 0 0xc00>, - <0 0xee0c0000 0 0x1100>; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 703>; - status = "disabled"; - - bus-range = <1 1>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - - usb@1,0 { - reg = <0x10800 0 0 0 0>; - phys = <&usb2 0>; - phy-names = "usb"; - }; - - usb@2,0 { - reg = <0x11000 0 0 0 0>; - phys = <&usb2 0>; - phy-names = "usb"; - }; - }; - - hsusb: usb@e6590000 { - compatible = "renesas,usbhs-r8a7745", - "renesas,rcar-gen2-usbhs"; - reg = <0 0xe6590000 0 0x100>; - interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 704>; - dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, - <&usb_dmac1 0>, <&usb_dmac1 1>; - dma-names = "ch0", "ch1", "ch2", "ch3"; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 704>; - renesas,buswait = <4>; - phys = <&usb0 1>; - phy-names = "usb"; - status = "disabled"; - }; - - usbphy: usb-phy@e6590100 { - compatible = "renesas,usb-phy-r8a7745", - "renesas,rcar-gen2-usb-phy"; - reg = <0 0xe6590100 0 0x100>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&cpg CPG_MOD 704>; - clock-names = "usbhs"; - power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; - resets = <&cpg 704>; - status = "disabled"; - - usb0: usb-channel@0 { - reg = <0>; - #phy-cells = <1>; - }; - usb2: usb-channel@2 { - reg = <2>; - #phy-cells = <1>; - }; - }; - can0: can@e6e80000 { compatible = "renesas,can-r8a7745", "renesas,rcar-gen2-can"; @@ -1295,6 +1073,28 @@ status = "disabled"; }; + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7745", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 811>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7745", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 810>; + status = "disabled"; + }; + rcar_sound: sound@ec500000 { /* * #sound-dai-cells is required @@ -1474,6 +1274,278 @@ }; }; }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a7745", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <13>; + }; + + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7745", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + }; + + pci1: pci@ee0d0000 { + compatible = "renesas,pci-r8a7745", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x10800 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x11000 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7745", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee100000 0 0x328>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee140000 { + compatible = "renesas,sdhi-r8a7745", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi2: sd@ee160000 { + compatible = "renesas,sdhi-r8a7745", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee160000 0 0x100>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; + + mmcif0: mmc@ee200000 { + compatible = "renesas,mmcif-r8a7745", + "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 315>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 315>; + reg-io-width = <4>; + max-frequency = <97500000>; + status = "disabled"; + }; + + ether: ethernet@ee700000 { + compatible = "renesas,ether-r8a7745", + "renesas,rcar-gen2-ether"; + reg = <0 0xee700000 0 0x400>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 813>; + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>, + <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + + vsp@fe928000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe928000 0 0x8000>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 131>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 131>; + }; + + vsp@fe930000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe930000 0 0x8000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 128>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 128>; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a7745"; + reg = <0 0xfeb00000 0 0x40000>; + reg-names = "du"; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb0: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_rgb1: endpoint { + }; + }; + }; + }; + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; + + cmt0: timer@ffca0000 { + compatible = "renesas,r8a7745-cmt0", + "renesas,rcar-gen2-cmt0"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a7745-cmt1", + "renesas,rcar-gen2-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 329>; + clock-names = "fck"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + resets = <&cpg 329>; + status = "disabled"; + }; }; timer { diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 9412a86f9b300..4b9006bac3cbc 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -42,6 +42,19 @@ regulator-always-on; }; + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + ethernet@18000000 { compatible = "smsc,lan9220", "smsc,lan9115"; reg = <0x18000000 0x100>; @@ -243,6 +256,7 @@ pinctrl-names = "default"; vmmc-supply = <&fixedregulator3v3>; + vqmmc-supply = <&vccq_sdhi0>; bus-width = <4>; status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index f2ea632381e7d..063fdb65dc60d 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -51,8 +51,11 @@ serial0 = &scif0; serial1 = &scifa1; i2c8 = &gpioi2c1; + i2c9 = &gpioi2c2; i2c10 = &i2cexio0; i2c11 = &i2cexio1; + i2c12 = &i2chdmi; + i2c13 = &i2cpwr; }; chosen { @@ -244,6 +247,12 @@ }; }; + cec_clock: cec-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + hdmi-out { compatible = "hdmi-connector"; type = "a"; @@ -272,8 +281,18 @@ #size-cells = <0>; compatible = "i2c-gpio"; status = "disabled"; - sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <5>; + }; + + gpioi2c2: i2c-9 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + status = "disabled"; + scl-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <5>; }; @@ -308,6 +327,138 @@ #address-cells = <1>; #size-cells = <0>; }; + + /* + * IIC2 and I2C2 may be switched using pinmux. + * A fallback to GPIO is also provided. + */ + i2chdmi: i2c-12 { + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>; + i2c-bus-name = "i2c-hdmi"; + #address-cells = <1>; + #size-cells = <0>; + + ak4643: codec@12 { + compatible = "asahi-kasei,ak4643"; + #sound-dai-cells = <0>; + reg = <0x12>; + }; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin1>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep0>; + }; + }; + }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + clocks = <&cec_clock>; + clock-names = "cec"; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + + hdmi-in@4c { + compatible = "adi,adv7612"; + reg = <0x4c>; + interrupt-parent = <&gpio1>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + default-input = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7612_in: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + + port@2 { + reg = <2>; + adv7612_out: endpoint { + remote-endpoint = <&vin0ep2>; + }; + }; + }; + }; + }; + + /* + * IIC3 and I2C3 may be switched using pinmux. + * IIC3/I2C3 does not appear to support fallback to GPIO. + */ + i2cpwr: i2c-13 { + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&iic3>, <&i2c3>; + i2c-bus-name = "i2c-pwr"; + #address-cells = <1>; + #size-cells = <0>; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; + + vdd_dvfs: regulator@68 { + compatible = "dlg,da9210"; + reg = <0x68>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + }; }; &du { @@ -437,11 +588,21 @@ function = "iic1"; }; + i2c2_pins: i2c2 { + groups = "i2c2"; + function = "i2c2"; + }; + iic2_pins: iic2 { groups = "iic2"; function = "iic2"; }; + i2c3_pins: i2c3 { + groups = "i2c3"; + function = "i2c3"; + }; + iic3_pins: iic3 { groups = "iic3"; function = "iic3"; @@ -643,124 +804,28 @@ pinctrl-names = "i2c-exio1"; }; -&iic2 { - status = "okay"; - pinctrl-0 = <&iic2_pins>; - pinctrl-names = "default"; +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "i2c-hdmi"; clock-frequency = <100000>; +}; - ak4643: codec@12 { - compatible = "asahi-kasei,ak4643"; - #sound-dai-cells = <0>; - reg = <0x12>; - }; - - composite-in@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - remote = <&vin1>; - - port { - adv7180: endpoint { - bus-width = <8>; - remote-endpoint = <&vin1ep0>; - }; - }; - }; - - hdmi@39 { - compatible = "adi,adv7511w"; - reg = <0x39>; - interrupt-parent = <&gpio1>; - interrupts = <15 IRQ_TYPE_LEVEL_LOW>; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511_in: endpoint { - remote-endpoint = <&du_out_lvds0>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_con_out>; - }; - }; - }; - }; - - hdmi-in@4c { - compatible = "adi,adv7612"; - reg = <0x4c>; - interrupt-parent = <&gpio1>; - interrupts = <20 IRQ_TYPE_LEVEL_LOW>; - default-input = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; +&iic2 { + pinctrl-0 = <&iic2_pins>; + pinctrl-names = "i2c-hdmi"; - port@0 { - reg = <0>; - adv7612_in: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; - }; + clock-frequency = <100000>; +}; - port@2 { - reg = <2>; - adv7612_out: endpoint { - remote-endpoint = <&vin0ep2>; - }; - }; - }; - }; +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "i2c-pwr"; }; -&iic3 { - pinctrl-names = "default"; +&iic3 { pinctrl-0 = <&iic3_pins>; - status = "okay"; - - pmic@58 { - compatible = "dlg,da9063"; - reg = <0x58>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - - rtc { - compatible = "dlg,da9063-rtc"; - }; - - wdt { - compatible = "dlg,da9063-watchdog"; - }; - }; - - vdd_dvfs: regulator@68 { - compatible = "dlg,da9210"; - reg = <0x68>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-boot-on; - regulator-always-on; - }; + pinctrl-names = "i2c-pwr"; }; &pci0 { diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts new file mode 100644 index 0000000000000..a13a92c266450 --- /dev/null +++ b/arch/arm/boot/dts/r8a7790-stout.dts @@ -0,0 +1,363 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Stout board + * + * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com> + */ + +/dts-v1/; +#include "r8a7790.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Stout"; + compatible = "renesas,stout", "renesas,r8a7790"; + + aliases { + serial0 = &scifa0; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + leds { + compatible = "gpio-leds"; + led1 { + gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + }; + led2 { + gpios = <&gpio4 23 GPIO_ACTIVE_LOW>; + }; + led3 { + gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; + }; + led5 { + gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + }; + }; + + fixedregulator3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + osc1_clk: osc1-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <148500000>; + }; + + osc4_clk: osc4-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 726>, <&cpg CPG_MOD 725>, + <&osc1_clk>; + clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1", "dclkin.0"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + port@1 { + lvds_connector0: endpoint { + }; + }; + port@2 { + lvds_connector1: endpoint { + }; + }; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&pfc { + + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + du_pins: du { + groups = "du_rgb888", "du_sync_1", "du_clk_out_0"; + function = "du"; + }; + + scifa0_pins: scifa0 { + groups = "scifa0_data_b"; + function = "scifa0"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk"; + function = "scif_clk"; + }; + + ether_pins: ether { + groups = "eth_link", "eth_mdio", "eth_rmii"; + function = "eth"; + }; + + phy1_pins: phy1 { + groups = "intc_irq1"; + function = "intc"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + qspi_pins: qspi { + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; + }; + + iic2_pins: iic2 { + groups = "iic2_b"; + function = "iic2"; + }; + + iic3_pins: iic3 { + groups = "iic3"; + function = "iic3"; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; +}; + +ðer { + pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&irqc0>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +}; + +&cmt0 { + status = "okay"; +}; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash: flash@0 { + compatible = "spansion,s25fl512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + spi-cpha; + spi-cpol; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "loader"; + reg = <0x00000000 0x00080000>; + read-only; + }; + partition@80000 { + label = "uboot"; + reg = <0x00080000 0x00040000>; + read-only; + }; + partition@c0000 { + label = "uboot-env"; + reg = <0x000c0000 0x00040000>; + read-only; + }; + partition@100000 { + label = "flash"; + reg = <0x00100000 0x03f00000>; + }; + }; + }; +}; + +&scifa0 { + pinctrl-0 = <&scifa0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi0>; + cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&cpu0 { + cpu0-supply = <&vdd_dvfs>; +}; + +&iic2 { + status = "okay"; + pinctrl-0 = <&iic2_pins>; + pinctrl-names = "default"; + + clock-frequency = <100000>; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + clocks = <&osc4_clk>; + clock-names = "cec"; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; +}; + +&iic3 { + pinctrl-names = "default"; + pinctrl-0 = <&iic3_pins>; + status = "okay"; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; + + vdd_dvfs: regulator@68 { + compatible = "dlg,da9210"; + reg = <0x68>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd: regulator@70 { + compatible = "dlg,da9210"; + reg = <0x70>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&pci0 { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index ed9a68538a554..e4367cecad18a 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -17,7 +17,6 @@ / { compatible = "renesas,r8a7790"; - interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; @@ -41,6 +40,35 @@ vin3 = &vin3; }; + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -159,1510 +187,1553 @@ }; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - - thermal-sensors = <&thermal>; - - trips { - cpu-crit { - temperature = <95000>; - hysteresis = <0>; - type = "critical"; - }; - }; - cooling-maps { - }; - }; + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; }; - apmu@e6151000 { - compatible = "renesas,r8a7790-apmu", "renesas,apmu"; - reg = <0 0xe6151000 0 0x188>; - cpus = <&cpu4 &cpu5 &cpu6 &cpu7>; + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; }; - apmu@e6152000 { - compatible = "renesas,r8a7790-apmu", "renesas,apmu"; - reg = <0 0xe6152000 0 0x188>; - cpus = <&cpu0 &cpu1 &cpu2 &cpu3>; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; }; - gic: interrupt-controller@f1001000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x2000>, - <0 0xf1004000 0 0x2000>, - <0 0xf1006000 0 0x2000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - clocks = <&cpg CPG_MOD 408>; - clock-names = "clk"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 408>; - }; + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; - gpio0: gpio@e6050000 { - compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6050000 0 0x50>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 0 32>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 912>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 912>; - }; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7790", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; - gpio1: gpio@e6051000 { - compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6051000 0 0x50>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 32 30>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 911>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 911>; - }; + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7790", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 30>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; - gpio2: gpio@e6052000 { - compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6052000 0 0x50>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 64 30>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 910>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 910>; - }; + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7790", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 30>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; - gpio3: gpio@e6053000 { - compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6053000 0 0x50>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 96 32>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 909>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 909>; - }; + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7790", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; - gpio4: gpio@e6054000 { - compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6054000 0 0x50>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 128 32>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 908>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 908>; - }; + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7790", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; - gpio5: gpio@e6055000 { - compatible = "renesas,gpio-r8a7790", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6055000 0 0x50>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 160 32>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 907>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 907>; - }; + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7790", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; - thermal: thermal@e61f0000 { - compatible = "renesas,thermal-r8a7790", - "renesas,rcar-gen2-thermal", - "renesas,rcar-thermal"; - reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 522>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 522>; - #thermal-sensor-cells = <0>; - }; + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a7790"; + reg = <0 0xe6060000 0 0x250>; + }; - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7790-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; - cmt0: timer@ffca0000 { - compatible = "renesas,r8a7790-cmt0", "renesas,rcar-gen2-cmt0"; - reg = <0 0xffca0000 0 0x1004>; - interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 124>; - clock-names = "fck"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 124>; - - status = "disabled"; - }; + apmu@e6151000 { + compatible = "renesas,r8a7790-apmu", "renesas,apmu"; + reg = <0 0xe6151000 0 0x188>; + cpus = <&cpu4 &cpu5 &cpu6 &cpu7>; + }; - cmt1: timer@e6130000 { - compatible = "renesas,r8a7790-cmt1", "renesas,rcar-gen2-cmt1"; - reg = <0 0xe6130000 0 0x1004>; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 329>; - clock-names = "fck"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 329>; - - status = "disabled"; - }; + apmu@e6152000 { + compatible = "renesas,r8a7790-apmu", "renesas,apmu"; + reg = <0 0xe6152000 0 0x188>; + cpus = <&cpu0 &cpu1 &cpu2 &cpu3>; + }; - irqc0: interrupt-controller@e61c0000 { - compatible = "renesas,irqc-r8a7790", "renesas,irqc"; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 407>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 407>; - }; + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7790-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; - dmac0: dma-controller@e6700000 { - compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; - reg = <0 0xe6700000 0 0x20000>; - interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12", "ch13", "ch14"; - clocks = <&cpg CPG_MOD 219>; - clock-names = "fck"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 219>; - #dma-cells = <1>; - dma-channels = <15>; - }; + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7790-sysc"; + reg = <0 0xe6180000 0 0x0200>; + #power-domain-cells = <1>; + }; - dmac1: dma-controller@e6720000 { - compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; - reg = <0 0xe6720000 0 0x20000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12", "ch13", "ch14"; - clocks = <&cpg CPG_MOD 218>; - clock-names = "fck"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 218>; - #dma-cells = <1>; - dma-channels = <15>; - }; + irqc0: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7790", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; - audma0: dma-controller@ec700000 { - compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; - reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12"; - clocks = <&cpg CPG_MOD 502>; - clock-names = "fck"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 502>; - #dma-cells = <1>; - dma-channels = <13>; - }; + thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7790", + "renesas,rcar-gen2-thermal", + "renesas,rcar-thermal"; + reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <0>; + }; - audma1: dma-controller@ec720000 { - compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac"; - reg = <0 0xec720000 0 0x10000>; - interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12"; - clocks = <&cpg CPG_MOD 501>; - clock-names = "fck"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 501>; - #dma-cells = <1>; - dma-channels = <13>; - }; + ipmmu_sy0: mmu@e6280000 { + compatible = "renesas,ipmmu-r8a7790", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6280000 0 0x1000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - usb_dmac0: dma-controller@e65a0000 { - compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac"; - reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "ch0", "ch1"; - clocks = <&cpg CPG_MOD 330>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 330>; - #dma-cells = <1>; - dma-channels = <2>; - }; + ipmmu_sy1: mmu@e6290000 { + compatible = "renesas,ipmmu-r8a7790", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6290000 0 0x1000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - usb_dmac1: dma-controller@e65b0000 { - compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac"; - reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "ch0", "ch1"; - clocks = <&cpg CPG_MOD 331>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 331>; - #dma-cells = <1>; - dma-channels = <2>; - }; + ipmmu_ds: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a7790", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6740000 0 0x1000>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - i2c0: i2c@e6508000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6508000 0 0x40>; - interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 931>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 931>; - i2c-scl-internal-delay-ns = <110>; - status = "disabled"; - }; + ipmmu_mp: mmu@ec680000 { + compatible = "renesas,ipmmu-r8a7790", + "renesas,ipmmu-vmsa"; + reg = <0 0xec680000 0 0x1000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - i2c1: i2c@e6518000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6518000 0 0x40>; - interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 930>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 930>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; + ipmmu_mx: mmu@fe951000 { + compatible = "renesas,ipmmu-r8a7790", + "renesas,ipmmu-vmsa"; + reg = <0 0xfe951000 0 0x1000>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - i2c2: i2c@e6530000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6530000 0 0x40>; - interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 929>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 929>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a7790", + "renesas,ipmmu-vmsa"; + reg = <0 0xffc80000 0 0x1000>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - i2c3: i2c@e6540000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6540000 0 0x40>; - interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 928>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 928>; - i2c-scl-internal-delay-ns = <110>; - status = "disabled"; - }; + icram0: sram@e63a0000 { + compatible = "mmio-sram"; + reg = <0 0xe63a0000 0 0x12000>; + }; - iic0: i2c@e6500000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", - "renesas,rmobile-iic"; - reg = <0 0xe6500000 0 0x425>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 318>; - dmas = <&dmac0 0x61>, <&dmac0 0x62>, - <&dmac1 0x61>, <&dmac1 0x62>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 318>; - status = "disabled"; - }; + icram1: sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0 0xe63c0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63c0000 0x1000>; - iic1: i2c@e6510000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", - "renesas,rmobile-iic"; - reg = <0 0xe6510000 0 0x425>; - interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 323>; - dmas = <&dmac0 0x65>, <&dmac0 0x66>, - <&dmac1 0x65>, <&dmac1 0x66>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 323>; - status = "disabled"; - }; + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x10>; + }; + }; - iic2: i2c@e6520000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", - "renesas,rmobile-iic"; - reg = <0 0xe6520000 0 0x425>; - interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 300>; - dmas = <&dmac0 0x69>, <&dmac0 0x6a>, - <&dmac1 0x69>, <&dmac1 0x6a>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 300>; - status = "disabled"; - }; + i2c0: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7790", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 931>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; - iic3: i2c@e60b0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", - "renesas,rmobile-iic"; - reg = <0 0xe60b0000 0 0x425>; - interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 926>; - dmas = <&dmac0 0x77>, <&dmac0 0x78>, - <&dmac1 0x77>, <&dmac1 0x78>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 926>; - status = "disabled"; - }; + i2c1: i2c@e6518000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7790", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6518000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 930>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; - mmcif0: mmc@ee200000 { - compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; - reg = <0 0xee200000 0 0x80>; - interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 315>; - dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, - <&dmac1 0xd1>, <&dmac1 0xd2>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 315>; - reg-io-width = <4>; - status = "disabled"; - max-frequency = <97500000>; - }; + i2c2: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7790", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6530000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 929>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; - mmcif1: mmc@ee220000 { - compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; - reg = <0 0xee220000 0 0x80>; - interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 305>; - dmas = <&dmac0 0xe1>, <&dmac0 0xe2>, - <&dmac1 0xe1>, <&dmac1 0xe2>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 305>; - reg-io-width = <4>; - status = "disabled"; - max-frequency = <97500000>; - }; + i2c3: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7790", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6540000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 928>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; - pfc: pin-controller@e6060000 { - compatible = "renesas,pfc-r8a7790"; - reg = <0 0xe6060000 0 0x250>; - }; + iic0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7790", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; - sdhi0: sd@ee100000 { - compatible = "renesas,sdhi-r8a7790", - "renesas,rcar-gen2-sdhi"; - reg = <0 0xee100000 0 0x328>; - interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 314>; - dmas = <&dmac0 0xcd>, <&dmac0 0xce>, - <&dmac1 0xcd>, <&dmac1 0xce>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <195000000>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 314>; - status = "disabled"; - }; + iic1: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7790", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 323>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 323>; + status = "disabled"; + }; - sdhi1: sd@ee120000 { - compatible = "renesas,sdhi-r8a7790", - "renesas,rcar-gen2-sdhi"; - reg = <0 0xee120000 0 0x328>; - interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 313>; - dmas = <&dmac0 0xc9>, <&dmac0 0xca>, - <&dmac1 0xc9>, <&dmac1 0xca>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <195000000>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 313>; - status = "disabled"; - }; + iic2: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7790", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6520000 0 0x425>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + dmas = <&dmac0 0x69>, <&dmac0 0x6a>, + <&dmac1 0x69>, <&dmac1 0x6a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; - sdhi2: sd@ee140000 { - compatible = "renesas,sdhi-r8a7790", - "renesas,rcar-gen2-sdhi"; - reg = <0 0xee140000 0 0x100>; - interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 312>; - dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, - <&dmac1 0xc1>, <&dmac1 0xc2>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <97500000>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 312>; - status = "disabled"; - }; + iic3: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7790", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + dmas = <&dmac0 0x77>, <&dmac0 0x78>, + <&dmac1 0x77>, <&dmac1 0x78>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 926>; + status = "disabled"; + }; - sdhi3: sd@ee160000 { - compatible = "renesas,sdhi-r8a7790", - "renesas,rcar-gen2-sdhi"; - reg = <0 0xee160000 0 0x100>; - interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 311>; - dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, - <&dmac1 0xd3>, <&dmac1 0xd4>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <97500000>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 311>; - status = "disabled"; - }; + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7790", + "renesas,rcar-gen2-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 704>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + status = "disabled"; + }; - scifa0: serial@e6c40000 { - compatible = "renesas,scifa-r8a7790", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c40000 0 64>; - interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 204>; - clock-names = "fck"; - dmas = <&dmac0 0x21>, <&dmac0 0x22>, - <&dmac1 0x21>, <&dmac1 0x22>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 204>; - status = "disabled"; - }; + usbphy: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7790", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 704>; + clock-names = "usbhs"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; - scifa1: serial@e6c50000 { - compatible = "renesas,scifa-r8a7790", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c50000 0 64>; - interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 203>; - clock-names = "fck"; - dmas = <&dmac0 0x25>, <&dmac0 0x26>, - <&dmac1 0x25>, <&dmac1 0x26>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 203>; - status = "disabled"; - }; + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; - scifa2: serial@e6c60000 { - compatible = "renesas,scifa-r8a7790", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c60000 0 64>; - interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 202>; - clock-names = "fck"; - dmas = <&dmac0 0x27>, <&dmac0 0x28>, - <&dmac1 0x27>, <&dmac1 0x28>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 202>; - status = "disabled"; - }; + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a7790-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; - scifb0: serial@e6c20000 { - compatible = "renesas,scifb-r8a7790", - "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c20000 0 0x100>; - interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 206>; - clock-names = "fck"; - dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, - <&dmac1 0x3d>, <&dmac1 0x3e>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 206>; - status = "disabled"; - }; + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a7790-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; - scifb1: serial@e6c30000 { - compatible = "renesas,scifb-r8a7790", - "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c30000 0 0x100>; - interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 207>; - clock-names = "fck"; - dmas = <&dmac0 0x19>, <&dmac0 0x1a>, - <&dmac1 0x19>, <&dmac1 0x1a>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 207>; - status = "disabled"; - }; + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a7790", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <15>; + }; - scifb2: serial@e6ce0000 { - compatible = "renesas,scifb-r8a7790", - "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6ce0000 0 0x100>; - interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 216>; - clock-names = "fck"; - dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, - <&dmac1 0x1d>, <&dmac1 0x1e>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 216>; - status = "disabled"; - }; + dmac1: dma-controller@e6720000 { + compatible = "renesas,dmac-r8a7790", + "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <15>; + }; - scif0: serial@e6e60000 { - compatible = "renesas,scif-r8a7790", "renesas,rcar-gen2-scif", - "renesas,scif"; - reg = <0 0xe6e60000 0 64>; - interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7790_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x29>, <&dmac0 0x2a>, - <&dmac1 0x29>, <&dmac1 0x2a>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 721>; - status = "disabled"; - }; + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7790", + "renesas,etheravb-rcar-gen2"; + reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 812>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - scif1: serial@e6e68000 { - compatible = "renesas,scif-r8a7790", "renesas,rcar-gen2-scif", - "renesas,scif"; - reg = <0 0xe6e68000 0 64>; - interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7790_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, - <&dmac1 0x2d>, <&dmac1 0x2e>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 720>; - status = "disabled"; - }; + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7790", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 917>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - scif2: serial@e6e56000 { - compatible = "renesas,scif-r8a7790", "renesas,rcar-gen2-scif", - "renesas,scif"; - reg = <0 0xe6e56000 0 64>; - interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 310>, <&cpg CPG_CORE R8A7790_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, - <&dmac1 0x2b>, <&dmac1 0x2c>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 310>; - status = "disabled"; - }; + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7790", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c40000 0 64>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>; + clock-names = "fck"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; - hscif0: serial@e62c0000 { - compatible = "renesas,hscif-r8a7790", - "renesas,rcar-gen2-hscif", "renesas,hscif"; - reg = <0 0xe62c0000 0 96>; - interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7790_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x39>, <&dmac0 0x3a>, - <&dmac1 0x39>, <&dmac1 0x3a>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 717>; - status = "disabled"; - }; + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a7790", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c50000 0 64>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>; + clock-names = "fck"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; - hscif1: serial@e62c8000 { - compatible = "renesas,hscif-r8a7790", - "renesas,rcar-gen2-hscif", "renesas,hscif"; - reg = <0 0xe62c8000 0 96>; - interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7790_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, - <&dmac1 0x4d>, <&dmac1 0x4e>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 716>; - status = "disabled"; - }; + scifa2: serial@e6c60000 { + compatible = "renesas,scifa-r8a7790", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c60000 0 64>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>; + clock-names = "fck"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; - icram0: sram@e63a0000 { - compatible = "mmio-sram"; - reg = <0 0xe63a0000 0 0x12000>; - }; + scifb0: serial@e6c20000 { + compatible = "renesas,scifb-r8a7790", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c20000 0 0x100>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>; + clock-names = "fck"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; - icram1: sram@e63c0000 { - compatible = "mmio-sram"; - reg = <0 0xe63c0000 0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0xe63c0000 0x1000>; + scifb1: serial@e6c30000 { + compatible = "renesas,scifb-r8a7790", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c30000 0 0x100>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>; + clock-names = "fck"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; - smp-sram@0 { - compatible = "renesas,smp-sram"; - reg = <0 0x10>; + scifb2: serial@e6ce0000 { + compatible = "renesas,scifb-r8a7790", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6ce0000 0 0x100>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 216>; + clock-names = "fck"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 216>; + status = "disabled"; }; - }; - ether: ethernet@ee700000 { - compatible = "renesas,ether-r8a7790", - "renesas,rcar-gen2-ether"; - reg = <0 0xee700000 0 0x400>; - interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 813>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 813>; - phy-mode = "rmii"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7790", + "renesas,rcar-gen2-scif", + "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 721>, + <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 721>; + status = "disabled"; + }; - avb: ethernet@e6800000 { - compatible = "renesas,etheravb-r8a7790", - "renesas,etheravb-rcar-gen2"; - reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; - interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 812>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 812>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7790", + "renesas,rcar-gen2-scif", + "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 720>, + <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 720>; + status = "disabled"; + }; - sata0: sata@ee300000 { - compatible = "renesas,sata-r8a7790", "renesas,rcar-gen2-sata"; - reg = <0 0xee300000 0 0x2000>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 815>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 815>; - status = "disabled"; - }; + scif2: serial@e6e56000 { + compatible = "renesas,scif-r8a7790", + "renesas,rcar-gen2-scif", + "renesas,scif"; + reg = <0 0xe6e56000 0 64>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 310>; + status = "disabled"; + }; - sata1: sata@ee500000 { - compatible = "renesas,sata-r8a7790", "renesas,rcar-gen2-sata"; - reg = <0 0xee500000 0 0x2000>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 814>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 814>; - status = "disabled"; - }; + hscif0: serial@e62c0000 { + compatible = "renesas,hscif-r8a7790", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c0000 0 96>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 717>, + <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 717>; + status = "disabled"; + }; - hsusb: usb@e6590000 { - compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs"; - reg = <0 0xe6590000 0 0x100>; - interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 704>; - dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, - <&usb_dmac1 0>, <&usb_dmac1 1>; - dma-names = "ch0", "ch1", "ch2", "ch3"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 704>; - renesas,buswait = <4>; - phys = <&usb0 1>; - phy-names = "usb"; - status = "disabled"; - }; + hscif1: serial@e62c8000 { + compatible = "renesas,hscif-r8a7790", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c8000 0 96>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>, + <&cpg CPG_CORE R8A7790_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + }; - usbphy: usb-phy@e6590100 { - compatible = "renesas,usb-phy-r8a7790", - "renesas,rcar-gen2-usb-phy"; - reg = <0 0xe6590100 0 0x100>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&cpg CPG_MOD 704>; - clock-names = "usbhs"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 704>; - status = "disabled"; + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-r8a7790", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 0>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>, + <&dmac1 0x51>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - usb0: usb-channel@0 { - reg = <0>; - #phy-cells = <1>; + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-r8a7790", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>, + <&dmac1 0x55>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - usb2: usb-channel@2 { - reg = <2>; - #phy-cells = <1>; + + msiof2: spi@e6e00000 { + compatible = "renesas,msiof-r8a7790", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 205>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>, + <&dmac1 0x41>, <&dmac1 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 205>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - }; - vin0: video@e6ef0000 { - compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; - reg = <0 0xe6ef0000 0 0x1000>; - interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 811>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 811>; - status = "disabled"; - }; + msiof3: spi@e6c90000 { + compatible = "renesas,msiof-r8a7790", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6c90000 0 0x0064>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 215>; + dmas = <&dmac0 0x45>, <&dmac0 0x46>, + <&dmac1 0x45>, <&dmac1 0x46>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 215>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - vin1: video@e6ef1000 { - compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; - reg = <0 0xe6ef1000 0 0x1000>; - interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 810>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 810>; - status = "disabled"; - }; + can0: can@e6e80000 { + compatible = "renesas,can-r8a7790", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e80000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A7790_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; - vin2: video@e6ef2000 { - compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; - reg = <0 0xe6ef2000 0 0x1000>; - interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 809>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 809>; - status = "disabled"; - }; + can1: can@e6e88000 { + compatible = "renesas,can-r8a7790", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e88000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A7790_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; - vin3: video@e6ef3000 { - compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; - reg = <0 0xe6ef3000 0 0x1000>; - interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 808>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 808>; - status = "disabled"; - }; + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7790", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 811>; + status = "disabled"; + }; - vsp@fe920000 { - compatible = "renesas,vsp1"; - reg = <0 0xfe920000 0 0x8000>; - interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 130>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 130>; - }; + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7790", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 810>; + status = "disabled"; + }; - vsp@fe928000 { - compatible = "renesas,vsp1"; - reg = <0 0xfe928000 0 0x8000>; - interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 131>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 131>; - }; + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a7790", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 809>; + status = "disabled"; + }; - vsp@fe930000 { - compatible = "renesas,vsp1"; - reg = <0 0xfe930000 0 0x8000>; - interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 128>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 128>; - }; + vin3: video@e6ef3000 { + compatible = "renesas,vin-r8a7790", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 808>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 808>; + status = "disabled"; + }; - vsp@fe938000 { - compatible = "renesas,vsp1"; - reg = <0 0xfe938000 0 0x8000>; - interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 127>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 127>; - }; + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a7790", + "renesas,rcar_sound-gen2"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, + <&cpg CPG_CORE R8A7790_CLK_M2>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "ctu.0", "ctu.1", + "mix.0", "mix.1", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma1 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma1 0xbe>; + dma-names = "tx"; + }; + }; - du: display@feb00000 { - compatible = "renesas,du-r8a7790"; - reg = <0 0xfeb00000 0 0x70000>, - <0 0xfeb90000 0 0x1c>, - <0 0xfeb94000 0 0x1c>; - reg-names = "du", "lvds.0", "lvds.1"; - interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 722>, <&cpg CPG_MOD 726>, - <&cpg CPG_MOD 725>; - clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1"; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; - port@0 { - reg = <0>; - du_out_rgb: endpoint { - }; + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; }; - port@1 { - reg = <1>; - du_out_lvds0: endpoint { + + rcar_sound,src { + src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; }; }; - port@2 { - reg = <2>; - du_out_lvds1: endpoint { + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, + <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, + <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, + <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, + <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, + <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, + <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, + <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, + <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, + <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, + <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; }; }; }; - }; - can0: can@e6e80000 { - compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can"; - reg = <0 0xe6e80000 0 0x1000>; - interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7790_CLK_RCAN>, - <&can_clk>; - clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 916>; - status = "disabled"; - }; - - can1: can@e6e88000 { - compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can"; - reg = <0 0xe6e88000 0 0x1000>; - interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7790_CLK_RCAN>, - <&can_clk>; - clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 915>; - status = "disabled"; - }; - - jpu: jpeg-codec@fe980000 { - compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu"; - reg = <0 0xfe980000 0 0x10300>; - interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 106>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 106>; - }; - - /* External root clock */ - extal_clk: extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; - - /* External PCIe clock - can be overridden by the board */ - pcie_bus_clk: pcie_bus { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a7790", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <13>; + }; - /* - * The external audio clocks are configured as 0 Hz fixed frequency - * clocks by default. - * Boards that provide audio clocks should override them. - */ - audio_clk_a: audio_clk_a { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clk_b: audio_clk_b { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clk_c: audio_clk_c { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a7790", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <13>; + }; - /* External SCIF clock */ - scif_clk: scif { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + xhci: usb@ee000000 { + compatible = "renesas,xhci-r8a7790", + "renesas,rcar-gen2-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 328>; + phys = <&usb2 1>; + phy-names = "usb"; + status = "disabled"; + }; - /* External USB clock - can be overridden by the board */ - usb_extal_clk: usb_extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7790", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; - /* External CAN clock */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + }; - cpg: clock-controller@e6150000 { - compatible = "renesas,r8a7790-cpg-mssr"; - reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>, <&usb_extal_clk>; - clock-names = "extal", "usb_extal"; - #clock-cells = <2>; - #power-domain-cells = <0>; - #reset-cells = <1>; - }; + pci1: pci@ee0b0000 { + compatible = "renesas,pci-r8a7790", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee0b0000 0 0xc00>, + <0 0xee0a0000 0 0x1100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + }; - prr: chipid@ff000044 { - compatible = "renesas,prr"; - reg = <0 0xff000044 0 4>; - }; + pci2: pci@ee0d0000 { + compatible = "renesas,pci-r8a7790", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 703>; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + bus-range = <2 2>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x20800 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; - rst: reset-controller@e6160000 { - compatible = "renesas,r8a7790-rst"; - reg = <0 0xe6160000 0 0x0100>; - }; + usb@2,0 { + reg = <0x21000 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + }; - sysc: system-controller@e6180000 { - compatible = "renesas,r8a7790-sysc"; - reg = <0 0xe6180000 0 0x0200>; - #power-domain-cells = <1>; - }; + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7790", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee100000 0 0x328>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; - qspi: spi@e6b10000 { - compatible = "renesas,qspi-r8a7790", "renesas,qspi"; - reg = <0 0xe6b10000 0 0x2c>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 917>; - dmas = <&dmac0 0x17>, <&dmac0 0x18>, - <&dmac1 0x17>, <&dmac1 0x18>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 917>; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a7790", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee120000 0 0x328>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + dmas = <&dmac0 0xc9>, <&dmac0 0xca>, + <&dmac1 0xc9>, <&dmac1 0xca>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 313>; + status = "disabled"; + }; - msiof0: spi@e6e20000 { - compatible = "renesas,msiof-r8a7790", - "renesas,rcar-gen2-msiof"; - reg = <0 0xe6e20000 0 0x0064>; - interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 0>; - dmas = <&dmac0 0x51>, <&dmac0 0x52>, - <&dmac1 0x51>, <&dmac1 0x52>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a7790", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; - msiof1: spi@e6e10000 { - compatible = "renesas,msiof-r8a7790", - "renesas,rcar-gen2-msiof"; - reg = <0 0xe6e10000 0 0x0064>; - interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 208>; - dmas = <&dmac0 0x55>, <&dmac0 0x56>, - <&dmac1 0x55>, <&dmac1 0x56>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 208>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a7790", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee160000 0 0x100>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; - msiof2: spi@e6e00000 { - compatible = "renesas,msiof-r8a7790", - "renesas,rcar-gen2-msiof"; - reg = <0 0xe6e00000 0 0x0064>; - interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 205>; - dmas = <&dmac0 0x41>, <&dmac0 0x42>, - <&dmac1 0x41>, <&dmac1 0x42>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 205>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + mmcif0: mmc@ee200000 { + compatible = "renesas,mmcif-r8a7790", + "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 315>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 315>; + reg-io-width = <4>; + status = "disabled"; + max-frequency = <97500000>; + }; - msiof3: spi@e6c90000 { - compatible = "renesas,msiof-r8a7790", - "renesas,rcar-gen2-msiof"; - reg = <0 0xe6c90000 0 0x0064>; - interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 215>; - dmas = <&dmac0 0x45>, <&dmac0 0x46>, - <&dmac1 0x45>, <&dmac1 0x46>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 215>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + mmcif1: mmc@ee220000 { + compatible = "renesas,mmcif-r8a7790", + "renesas,sh-mmcif"; + reg = <0 0xee220000 0 0x80>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 305>; + dmas = <&dmac0 0xe1>, <&dmac0 0xe2>, + <&dmac1 0xe1>, <&dmac1 0xe2>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 305>; + reg-io-width = <4>; + status = "disabled"; + max-frequency = <97500000>; + }; - xhci: usb@ee000000 { - compatible = "renesas,xhci-r8a7790", "renesas,rcar-gen2-xhci"; - reg = <0 0xee000000 0 0xc00>; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 328>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 328>; - phys = <&usb2 1>; - phy-names = "usb"; - status = "disabled"; - }; + sata0: sata@ee300000 { + compatible = "renesas,sata-r8a7790", + "renesas,rcar-gen2-sata"; + reg = <0 0xee300000 0 0x2000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 815>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 815>; + status = "disabled"; + }; - pci0: pci@ee090000 { - compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; - device_type = "pci"; - reg = <0 0xee090000 0 0xc00>, - <0 0xee080000 0 0x1100>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 703>; - status = "disabled"; - - bus-range = <0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - - usb@1,0 { - reg = <0x800 0 0 0 0>; - phys = <&usb0 0>; - phy-names = "usb"; + sata1: sata@ee500000 { + compatible = "renesas,sata-r8a7790", + "renesas,rcar-gen2-sata"; + reg = <0 0xee500000 0 0x2000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 814>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 814>; + status = "disabled"; }; - usb@2,0 { - reg = <0x1000 0 0 0 0>; - phys = <&usb0 0>; - phy-names = "usb"; + ether: ethernet@ee700000 { + compatible = "renesas,ether-r8a7790", + "renesas,rcar-gen2-ether"; + reg = <0 0xee700000 0 0x400>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 813>; + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - }; - pci1: pci@ee0b0000 { - compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; - device_type = "pci"; - reg = <0 0xee0b0000 0 0xc00>, - <0 0xee0a0000 0 0x1100>; - interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 703>; - status = "disabled"; - - bus-range = <1 1>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; - }; + gic: interrupt-controller@f1001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>, + <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; - pci2: pci@ee0d0000 { - compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; - device_type = "pci"; - clocks = <&cpg CPG_MOD 703>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 703>; - reg = <0 0xee0d0000 0 0xc00>, - <0 0xee0c0000 0 0x1100>; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - - bus-range = <2 2>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - - usb@1,0 { - reg = <0x20800 0 0 0 0>; - phys = <&usb2 0>; - phy-names = "usb"; + pciec: pcie@fe000000 { + compatible = "renesas,pcie-r8a7790", + "renesas,pcie-rcar-gen2"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 + 0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; }; - usb@2,0 { - reg = <0x21000 0 0 0 0>; - phys = <&usb2 0>; - phy-names = "usb"; + vsp@fe920000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe920000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 130>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 130>; }; - }; - pciec: pcie@fe000000 { - compatible = "renesas,pcie-r8a7790", "renesas,pcie-rcar-gen2"; - reg = <0 0xfe000000 0 0x80000>; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x00 0xff>; - device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 - 0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; - clock-names = "pcie", "pcie_bus"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 319>; - status = "disabled"; - }; + vsp@fe928000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe928000 0 0x8000>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 131>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 131>; + }; - rcar_sound: sound@ec500000 { - /* - * #sound-dai-cells is required - * - * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; - * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; - */ - compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2"; - reg = <0 0xec500000 0 0x1000>, /* SCU */ - <0 0xec5a0000 0 0x100>, /* ADG */ - <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ - reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; - - clocks = <&cpg CPG_MOD 1005>, - <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, - <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, - <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, - <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, - <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, - <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, - <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, - <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, - <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, - <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, - <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, - <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, - <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, - <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, - <&cpg CPG_CORE R8A7790_CLK_M2>; - clock-names = "ssi-all", - "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", - "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", - "src.9", "src.8", "src.7", "src.6", "src.5", - "src.4", "src.3", "src.2", "src.1", "src.0", - "ctu.0", "ctu.1", - "mix.0", "mix.1", - "dvc.0", "dvc.1", - "clk_a", "clk_b", "clk_c", "clk_i"; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 1005>, - <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>, - <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>, - <&cpg 1014>, <&cpg 1015>; - reset-names = "ssi-all", - "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", - "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0"; - - status = "disabled"; - - rcar_sound,dvc { - dvc0: dvc-0 { - dmas = <&audma1 0xbc>; - dma-names = "tx"; - }; - dvc1: dvc-1 { - dmas = <&audma1 0xbe>; - dma-names = "tx"; - }; + vsp@fe930000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe930000 0 0x8000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 128>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 128>; }; - rcar_sound,mix { - mix0: mix-0 { }; - mix1: mix-1 { }; + vsp@fe938000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe938000 0 0x8000>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 127>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 127>; }; - rcar_sound,ctu { - ctu00: ctu-0 { }; - ctu01: ctu-1 { }; - ctu02: ctu-2 { }; - ctu03: ctu-3 { }; - ctu10: ctu-4 { }; - ctu11: ctu-5 { }; - ctu12: ctu-6 { }; - ctu13: ctu-7 { }; + jpu: jpeg-codec@fe980000 { + compatible = "renesas,jpu-r8a7790", + "renesas,rcar-gen2-jpu"; + reg = <0 0xfe980000 0 0x10300>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 106>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 106>; }; - rcar_sound,src { - src0: src-0 { - interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x85>, <&audma1 0x9a>; - dma-names = "rx", "tx"; - }; - src1: src-1 { - interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x87>, <&audma1 0x9c>; - dma-names = "rx", "tx"; - }; - src2: src-2 { - interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x89>, <&audma1 0x9e>; - dma-names = "rx", "tx"; - }; - src3: src-3 { - interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x8b>, <&audma1 0xa0>; - dma-names = "rx", "tx"; - }; - src4: src-4 { - interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x8d>, <&audma1 0xb0>; - dma-names = "rx", "tx"; - }; - src5: src-5 { - interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x8f>, <&audma1 0xb2>; - dma-names = "rx", "tx"; - }; - src6: src-6 { - interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x91>, <&audma1 0xb4>; - dma-names = "rx", "tx"; - }; - src7: src-7 { - interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x93>, <&audma1 0xb6>; - dma-names = "rx", "tx"; - }; - src8: src-8 { - interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x95>, <&audma1 0xb8>; - dma-names = "rx", "tx"; - }; - src9: src-9 { - interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x97>, <&audma1 0xba>; - dma-names = "rx", "tx"; + du: display@feb00000 { + compatible = "renesas,du-r8a7790"; + reg = <0 0xfeb00000 0 0x70000>, + <0 0xfeb90000 0 0x1c>, + <0 0xfeb94000 0 0x1c>; + reg-names = "du", "lvds.0", "lvds.1"; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, <&cpg CPG_MOD 726>, + <&cpg CPG_MOD 725>; + clock-names = "du.0", "du.1", "du.2", "lvds.0", + "lvds.1"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + }; + }; + port@2 { + reg = <2>; + du_out_lvds1: endpoint { + }; + }; }; }; - rcar_sound,ssi { - ssi0: ssi-0 { - interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi1: ssi-1 { - interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi2: ssi-2 { - interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi3: ssi-3 { - interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi4: ssi-4 { - interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi5: ssi-5 { - interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi6: ssi-6 { - interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi7: ssi-7 { - interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi8: ssi-8 { - interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi9: ssi-9 { - interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; - dma-names = "rx", "tx", "rxu", "txu"; - }; + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; }; - }; - ipmmu_sy0: mmu@e6280000 { - compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; - reg = <0 0xe6280000 0 0x1000>; - interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; - }; + cmt0: timer@ffca0000 { + compatible = "renesas,r8a7790-cmt0", + "renesas,rcar-gen2-cmt0"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 124>; + + status = "disabled"; + }; - ipmmu_sy1: mmu@e6290000 { - compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; - reg = <0 0xe6290000 0 0x1000>; - interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; + cmt1: timer@e6130000 { + compatible = "renesas,r8a7790-cmt1", + "renesas,rcar-gen2-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 329>; + clock-names = "fck"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 329>; + + status = "disabled"; + }; }; - ipmmu_ds: mmu@e6740000 { - compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; - reg = <0 0xe6740000 0 0x1000>; - interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; - }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; - ipmmu_mp: mmu@ec680000 { - compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; - reg = <0 0xec680000 0 0x1000>; - interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <95000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; }; - ipmmu_mx: mmu@fe951000 { - compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; - reg = <0 0xfe951000 0 0x1000>; - interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; + timer { + compatible = "arm,armv7-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; - ipmmu_rt: mmu@ffc80000 { - compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa"; - reg = <0 0xffc80000 0 0x1000>; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; }; }; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index a50924d12b6f3..f40321a1c917e 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -51,7 +51,11 @@ serial0 = &scif0; serial1 = &scif1; i2c9 = &gpioi2c1; + i2c10 = &gpioi2c2; + i2c11 = &gpioi2c4; i2c12 = &i2cexio1; + i2c13 = &i2chdmi; + i2c14 = &i2cexio4; }; chosen { @@ -312,8 +316,28 @@ #size-cells = <0>; compatible = "i2c-gpio"; status = "disabled"; - sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <5>; + }; + + gpioi2c2: i2c-10 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + status = "disabled"; + scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <5>; + }; + + gpioi2c4: i2c-11 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + status = "disabled"; + scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <5>; }; @@ -328,6 +352,115 @@ #address-cells = <1>; #size-cells = <0>; }; + + /* + * A fallback to GPIO is provided for I2C2. + */ + i2chdmi: i2c-13 { + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&i2c2>, <&gpioi2c2>; + i2c-bus-name = "i2c-hdmi"; + #address-cells = <1>; + #size-cells = <0>; + + ak4643: codec@12 { + compatible = "asahi-kasei,ak4643"; + #sound-dai-cells = <0>; + reg = <0x12>; + }; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin1>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep>; + }; + }; + }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio3>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + clocks = <&cec_clock>; + clock-names = "cec"; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + + hdmi-in@4c { + compatible = "adi,adv7612"; + reg = <0x4c>; + interrupt-parent = <&gpio4>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + default-input = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7612_in: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + + port@2 { + reg = <2>; + adv7612_out: endpoint { + remote-endpoint = <&vin0ep2>; + }; + }; + }; + }; + + eeprom@50 { + compatible = "renesas,r1ex24002", "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + }; + + /* + * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA). + * A fallback to GPIO is provided. + */ + i2cexio4: i2c-14 { + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&i2c4>, <&gpioi2c4>; + i2c-bus-name = "i2c-exio4"; + #address-cells = <1>; + #size-cells = <0>; + }; }; &du { @@ -371,6 +504,11 @@ function = "i2c2"; }; + i2c4_pins: i2c4 { + groups = "i2c4_c"; + function = "i2c4"; + }; + du_pins: du { groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; function = "du"; @@ -621,96 +759,14 @@ &i2c2 { pinctrl-0 = <&i2c2_pins>; - pinctrl-names = "default"; + pinctrl-names = "i2c-hdmi"; - status = "okay"; clock-frequency = <100000>; +}; - ak4643: codec@12 { - compatible = "asahi-kasei,ak4643"; - #sound-dai-cells = <0>; - reg = <0x12>; - }; - - composite-in@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - remote = <&vin1>; - - port { - adv7180: endpoint { - bus-width = <8>; - remote-endpoint = <&vin1ep>; - }; - }; - }; - - hdmi@39 { - compatible = "adi,adv7511w"; - reg = <0x39>; - interrupt-parent = <&gpio3>; - interrupts = <29 IRQ_TYPE_LEVEL_LOW>; - clocks = <&cec_clock>; - clock-names = "cec"; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511_in: endpoint { - remote-endpoint = <&du_out_rgb>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_con_out>; - }; - }; - }; - }; - - hdmi-in@4c { - compatible = "adi,adv7612"; - reg = <0x4c>; - interrupt-parent = <&gpio4>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - default-input = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7612_in: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; - }; - - port@2 { - reg = <2>; - adv7612_out: endpoint { - remote-endpoint = <&vin0ep2>; - }; - }; - }; - }; - - eeprom@50 { - compatible = "renesas,r1ex24002", "atmel,24c02"; - reg = <0x50>; - pagesize = <16>; - }; +&i2c4 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "i2c-exio4"; }; &i2c6 { diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index eb374956294f6..c14e6fe9e4f69 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -29,6 +29,8 @@ aliases { serial0 = &scif0; + i2c9 = &gpioi2c2; + i2c10 = &i2chdmi; }; chosen { @@ -135,6 +137,78 @@ clocks = <&x14_clk>; }; }; + + gpioi2c2: i2c-9 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + status = "disabled"; + scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <5>; + }; + + /* + * A fallback to GPIO is provided for I2C2. + */ + i2chdmi: i2c-10 { + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&i2c2>, <&gpioi2c2>; + i2c-bus-name = "i2c-hdmi"; + #address-cells = <1>; + #size-cells = <0>; + + ak4642: codec@12 { + compatible = "asahi-kasei,ak4642"; + #sound-dai-cells = <0>; + reg = <0x12>; + }; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin0>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin0ep>; + }; + }; + }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio3>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + }; }; &extal_clk { @@ -296,61 +370,9 @@ &i2c2 { pinctrl-0 = <&i2c2_pins>; - pinctrl-names = "default"; + pinctrl-names = "i2c-hdmi"; - status = "okay"; clock-frequency = <400000>; - - ak4642: codec@12 { - compatible = "asahi-kasei,ak4642"; - #sound-dai-cells = <0>; - reg = <0x12>; - }; - - composite-in@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - remote = <&vin0>; - - port { - adv7180: endpoint { - bus-width = <8>; - remote-endpoint = <&vin0ep>; - }; - }; - }; - - hdmi@39 { - compatible = "adi,adv7511w"; - reg = <0x39>; - interrupt-parent = <&gpio3>; - interrupts = <29 IRQ_TYPE_LEVEL_LOW>; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511_in: endpoint { - remote-endpoint = <&du_out_rgb>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_con>; - }; - }; - }; - }; }; &sata0 { @@ -425,7 +447,7 @@ "dclkin.0", "dclkin.1"; ports { - port@1 { + port@0 { endpoint { remote-endpoint = <&adv7511_in>; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 008a260f86a56..f11dab71b03a9 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -17,7 +17,6 @@ / { compatible = "renesas,r8a7791"; - interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; @@ -40,6 +39,35 @@ vin2 = &vin2; }; + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -83,1585 +111,1627 @@ }; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - - thermal-sensors = <&thermal>; - - trips { - cpu-crit { - temperature = <95000>; - hysteresis = <0>; - type = "critical"; - }; - }; - cooling-maps { - }; - }; - }; - - apmu@e6152000 { - compatible = "renesas,r8a7791-apmu", "renesas,apmu"; - reg = <0 0xe6152000 0 0x188>; - cpus = <&cpu0 &cpu1>; - }; - - gic: interrupt-controller@f1001000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x2000>, - <0 0xf1004000 0 0x2000>, - <0 0xf1006000 0 0x2000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; - clocks = <&cpg CPG_MOD 408>; - clock-names = "clk"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 408>; - }; - - gpio0: gpio@e6050000 { - compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6050000 0 0x50>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 0 32>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 912>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 912>; - }; - - gpio1: gpio@e6051000 { - compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6051000 0 0x50>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 32 26>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 911>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 911>; - }; - - gpio2: gpio@e6052000 { - compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6052000 0 0x50>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 64 32>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 910>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 910>; + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; }; - gpio3: gpio@e6053000 { - compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6053000 0 0x50>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 96 32>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 909>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 909>; + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; }; - gpio4: gpio@e6054000 { - compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6054000 0 0x50>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 128 32>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 908>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 908>; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; }; - gpio5: gpio@e6055000 { - compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6055000 0 0x50>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 160 32>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 907>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 907>; - }; + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; - gpio6: gpio@e6055400 { - compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6055400 0 0x50>; - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 192 32>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 905>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 905>; - }; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7791", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; - gpio7: gpio@e6055800 { - compatible = "renesas,gpio-r8a7791", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6055800 0 0x50>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 224 26>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 904>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 904>; - }; + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7791", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; - thermal: thermal@e61f0000 { - compatible = "renesas,thermal-r8a7791", - "renesas,rcar-gen2-thermal", - "renesas,rcar-thermal"; - reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 522>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 522>; - #thermal-sensor-cells = <0>; - }; + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7791", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; - }; + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7791", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; - cmt0: timer@ffca0000 { - compatible = "renesas,r8a7791-cmt0", "renesas,rcar-gen2-cmt0"; - reg = <0 0xffca0000 0 0x1004>; - interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 124>; - clock-names = "fck"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 124>; - - status = "disabled"; - }; + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7791", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; - cmt1: timer@e6130000 { - compatible = "renesas,r8a7791-cmt1", "renesas,rcar-gen2-cmt1"; - reg = <0 0xe6130000 0 0x1004>; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 329>; - clock-names = "fck"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 329>; - - status = "disabled"; - }; + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7791", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; - irqc0: interrupt-controller@e61c0000 { - compatible = "renesas,irqc-r8a7791", "renesas,irqc"; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 407>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 407>; - }; + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a7791", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 905>; + }; - dmac0: dma-controller@e6700000 { - compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; - reg = <0 0xe6700000 0 0x20000>; - interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12", "ch13", "ch14"; - clocks = <&cpg CPG_MOD 219>; - clock-names = "fck"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 219>; - #dma-cells = <1>; - dma-channels = <15>; - }; + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a7791", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 904>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 904>; + }; - dmac1: dma-controller@e6720000 { - compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; - reg = <0 0xe6720000 0 0x20000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12", "ch13", "ch14"; - clocks = <&cpg CPG_MOD 218>; - clock-names = "fck"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 218>; - #dma-cells = <1>; - dma-channels = <15>; - }; + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a7791"; + reg = <0 0xe6060000 0 0x250>; + }; - audma0: dma-controller@ec700000 { - compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; - reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12"; - clocks = <&cpg CPG_MOD 502>; - clock-names = "fck"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 502>; - #dma-cells = <1>; - dma-channels = <13>; - }; + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7791-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; - audma1: dma-controller@ec720000 { - compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac"; - reg = <0 0xec720000 0 0x10000>; - interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12"; - clocks = <&cpg CPG_MOD 501>; - clock-names = "fck"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 501>; - #dma-cells = <1>; - dma-channels = <13>; - }; + apmu@e6152000 { + compatible = "renesas,r8a7791-apmu", "renesas,apmu"; + reg = <0 0xe6152000 0 0x188>; + cpus = <&cpu0 &cpu1>; + }; - usb_dmac0: dma-controller@e65a0000 { - compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac"; - reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "ch0", "ch1"; - clocks = <&cpg CPG_MOD 330>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 330>; - #dma-cells = <1>; - dma-channels = <2>; - }; + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7791-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; - usb_dmac1: dma-controller@e65b0000 { - compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac"; - reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "ch0", "ch1"; - clocks = <&cpg CPG_MOD 331>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 331>; - #dma-cells = <1>; - dma-channels = <2>; - }; + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7791-sysc"; + reg = <0 0xe6180000 0 0x0200>; + #power-domain-cells = <1>; + }; - /* The memory map in the User's Manual maps the cores to bus numbers */ - i2c0: i2c@e6508000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6508000 0 0x40>; - interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 931>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 931>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; + irqc0: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7791", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; - i2c1: i2c@e6518000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6518000 0 0x40>; - interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 930>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 930>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; + thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7791", + "renesas,rcar-gen2-thermal", + "renesas,rcar-thermal"; + reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <0>; + }; - i2c2: i2c@e6530000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6530000 0 0x40>; - interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 929>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 929>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; + ipmmu_sy0: mmu@e6280000 { + compatible = "renesas,ipmmu-r8a7791", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6280000 0 0x1000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - i2c3: i2c@e6540000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6540000 0 0x40>; - interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 928>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 928>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; + ipmmu_sy1: mmu@e6290000 { + compatible = "renesas,ipmmu-r8a7791", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6290000 0 0x1000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - i2c4: i2c@e6520000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6520000 0 0x40>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 927>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 927>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; + ipmmu_ds: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a7791", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6740000 0 0x1000>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - i2c5: i2c@e6528000 { - /* doesn't need pinmux */ - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6528000 0 0x40>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 925>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 925>; - i2c-scl-internal-delay-ns = <110>; - status = "disabled"; - }; + ipmmu_mp: mmu@ec680000 { + compatible = "renesas,ipmmu-r8a7791", + "renesas,ipmmu-vmsa"; + reg = <0 0xec680000 0 0x1000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - i2c6: i2c@e60b0000 { - /* doesn't need pinmux */ - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,iic-r8a7791", "renesas,rcar-gen2-iic", - "renesas,rmobile-iic"; - reg = <0 0xe60b0000 0 0x425>; - interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 926>; - dmas = <&dmac0 0x77>, <&dmac0 0x78>, - <&dmac1 0x77>, <&dmac1 0x78>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 926>; - status = "disabled"; - }; + ipmmu_mx: mmu@fe951000 { + compatible = "renesas,ipmmu-r8a7791", + "renesas,ipmmu-vmsa"; + reg = <0 0xfe951000 0 0x1000>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - i2c7: i2c@e6500000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,iic-r8a7791", "renesas,rcar-gen2-iic", - "renesas,rmobile-iic"; - reg = <0 0xe6500000 0 0x425>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 318>; - dmas = <&dmac0 0x61>, <&dmac0 0x62>, - <&dmac1 0x61>, <&dmac1 0x62>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 318>; - status = "disabled"; - }; + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a7791", + "renesas,ipmmu-vmsa"; + reg = <0 0xffc80000 0 0x1000>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - i2c8: i2c@e6510000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,iic-r8a7791", "renesas,rcar-gen2-iic", - "renesas,rmobile-iic"; - reg = <0 0xe6510000 0 0x425>; - interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 323>; - dmas = <&dmac0 0x65>, <&dmac0 0x66>, - <&dmac1 0x65>, <&dmac1 0x66>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 323>; - status = "disabled"; - }; + ipmmu_gp: mmu@e62a0000 { + compatible = "renesas,ipmmu-r8a7791", + "renesas,ipmmu-vmsa"; + reg = <0 0xe62a0000 0 0x1000>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - pfc: pin-controller@e6060000 { - compatible = "renesas,pfc-r8a7791"; - reg = <0 0xe6060000 0 0x250>; - }; + icram0: sram@e63a0000 { + compatible = "mmio-sram"; + reg = <0 0xe63a0000 0 0x12000>; + }; - mmcif0: mmc@ee200000 { - compatible = "renesas,mmcif-r8a7791", "renesas,sh-mmcif"; - reg = <0 0xee200000 0 0x80>; - interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 315>; - dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, - <&dmac1 0xd1>, <&dmac1 0xd2>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 315>; - reg-io-width = <4>; - status = "disabled"; - max-frequency = <97500000>; - }; + icram1: sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0 0xe63c0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63c0000 0x1000>; - sdhi0: sd@ee100000 { - compatible = "renesas,sdhi-r8a7791", - "renesas,rcar-gen2-sdhi"; - reg = <0 0xee100000 0 0x328>; - interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 314>; - dmas = <&dmac0 0xcd>, <&dmac0 0xce>, - <&dmac1 0xcd>, <&dmac1 0xce>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <195000000>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 314>; - status = "disabled"; - }; + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x10>; + }; + }; - sdhi1: sd@ee140000 { - compatible = "renesas,sdhi-r8a7791", - "renesas,rcar-gen2-sdhi"; - reg = <0 0xee140000 0 0x100>; - interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 312>; - dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, - <&dmac1 0xc1>, <&dmac1 0xc2>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <97500000>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 312>; - status = "disabled"; - }; + /* The memory map in the User's Manual maps the cores to + * bus numbers + */ + i2c0: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7791", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 931>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; - sdhi2: sd@ee160000 { - compatible = "renesas,sdhi-r8a7791", - "renesas,rcar-gen2-sdhi"; - reg = <0 0xee160000 0 0x100>; - interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 311>; - dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, - <&dmac1 0xd3>, <&dmac1 0xd4>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <97500000>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 311>; - status = "disabled"; - }; + i2c1: i2c@e6518000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7791", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6518000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 930>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; - scifa0: serial@e6c40000 { - compatible = "renesas,scifa-r8a7791", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c40000 0 64>; - interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 204>; - clock-names = "fck"; - dmas = <&dmac0 0x21>, <&dmac0 0x22>, - <&dmac1 0x21>, <&dmac1 0x22>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 204>; - status = "disabled"; - }; + i2c2: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7791", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6530000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 929>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; - scifa1: serial@e6c50000 { - compatible = "renesas,scifa-r8a7791", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c50000 0 64>; - interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 203>; - clock-names = "fck"; - dmas = <&dmac0 0x25>, <&dmac0 0x26>, - <&dmac1 0x25>, <&dmac1 0x26>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 203>; - status = "disabled"; - }; + i2c3: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7791", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6540000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 928>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; - scifa2: serial@e6c60000 { - compatible = "renesas,scifa-r8a7791", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c60000 0 64>; - interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 202>; - clock-names = "fck"; - dmas = <&dmac0 0x27>, <&dmac0 0x28>, - <&dmac1 0x27>, <&dmac1 0x28>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 202>; - status = "disabled"; - }; + i2c4: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7791", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6520000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 927>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; - scifa3: serial@e6c70000 { - compatible = "renesas,scifa-r8a7791", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c70000 0 64>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 1106>; - clock-names = "fck"; - dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, - <&dmac1 0x1b>, <&dmac1 0x1c>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 1106>; - status = "disabled"; - }; + i2c5: i2c@e6528000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7791", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6528000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 925>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 925>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; - scifa4: serial@e6c78000 { - compatible = "renesas,scifa-r8a7791", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c78000 0 64>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 1107>; - clock-names = "fck"; - dmas = <&dmac0 0x1f>, <&dmac0 0x20>, - <&dmac1 0x1f>, <&dmac1 0x20>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 1107>; - status = "disabled"; - }; + i2c6: i2c@e60b0000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7791", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + dmas = <&dmac0 0x77>, <&dmac0 0x78>, + <&dmac1 0x77>, <&dmac1 0x78>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 926>; + status = "disabled"; + }; - scifa5: serial@e6c80000 { - compatible = "renesas,scifa-r8a7791", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c80000 0 64>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 1108>; - clock-names = "fck"; - dmas = <&dmac0 0x23>, <&dmac0 0x24>, - <&dmac1 0x23>, <&dmac1 0x24>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 1108>; - status = "disabled"; - }; + i2c7: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7791", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; - scifb0: serial@e6c20000 { - compatible = "renesas,scifb-r8a7791", - "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c20000 0 0x100>; - interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 206>; - clock-names = "fck"; - dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, - <&dmac1 0x3d>, <&dmac1 0x3e>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 206>; - status = "disabled"; - }; + i2c8: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7791", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 323>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 323>; + status = "disabled"; + }; - scifb1: serial@e6c30000 { - compatible = "renesas,scifb-r8a7791", - "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c30000 0 0x100>; - interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 207>; - clock-names = "fck"; - dmas = <&dmac0 0x19>, <&dmac0 0x1a>, - <&dmac1 0x19>, <&dmac1 0x1a>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 207>; - status = "disabled"; - }; + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7791", + "renesas,rcar-gen2-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 704>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + status = "disabled"; + }; - scifb2: serial@e6ce0000 { - compatible = "renesas,scifb-r8a7791", - "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6ce0000 0 0x100>; - interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 216>; - clock-names = "fck"; - dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, - <&dmac1 0x1d>, <&dmac1 0x1e>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 216>; - status = "disabled"; - }; + usbphy: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7791", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 704>; + clock-names = "usbhs"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; - scif0: serial@e6e60000 { - compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", - "renesas,scif"; - reg = <0 0xe6e60000 0 64>; - interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x29>, <&dmac0 0x2a>, - <&dmac1 0x29>, <&dmac1 0x2a>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 721>; - status = "disabled"; - }; + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; - scif1: serial@e6e68000 { - compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", - "renesas,scif"; - reg = <0 0xe6e68000 0 64>; - interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7791_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, - <&dmac1 0x2d>, <&dmac1 0x2e>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 720>; - status = "disabled"; - }; + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a7791-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; - adc: adc@e6e54000 { - compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc"; - reg = <0 0xe6e54000 0 64>; - clocks = <&cpg CPG_MOD 901>; - clock-names = "fck"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 901>; - status = "disabled"; - }; + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a7791-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; - scif2: serial@e6e58000 { - compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", - "renesas,scif"; - reg = <0 0xe6e58000 0 64>; - interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7791_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, - <&dmac1 0x2b>, <&dmac1 0x2c>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 719>; - status = "disabled"; - }; + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a7791", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <15>; + }; - scif3: serial@e6ea8000 { - compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", - "renesas,scif"; - reg = <0 0xe6ea8000 0 64>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7791_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2f>, <&dmac0 0x30>, - <&dmac1 0x2f>, <&dmac1 0x30>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 718>; - status = "disabled"; - }; + dmac1: dma-controller@e6720000 { + compatible = "renesas,dmac-r8a7791", + "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <15>; + }; - scif4: serial@e6ee0000 { - compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", - "renesas,scif"; - reg = <0 0xe6ee0000 0 64>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7791_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, - <&dmac1 0xfb>, <&dmac1 0xfc>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 715>; - status = "disabled"; - }; + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7791", + "renesas,etheravb-rcar-gen2"; + reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 812>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - scif5: serial@e6ee8000 { - compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", - "renesas,scif"; - reg = <0 0xe6ee8000 0 64>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7791_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, - <&dmac1 0xfd>, <&dmac1 0xfe>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 714>; - status = "disabled"; - }; + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7791", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 917>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - hscif0: serial@e62c0000 { - compatible = "renesas,hscif-r8a7791", - "renesas,rcar-gen2-hscif", "renesas,hscif"; - reg = <0 0xe62c0000 0 96>; - interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7791_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x39>, <&dmac0 0x3a>, - <&dmac1 0x39>, <&dmac1 0x3a>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 717>; - status = "disabled"; - }; + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c40000 0 64>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>; + clock-names = "fck"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; - hscif1: serial@e62c8000 { - compatible = "renesas,hscif-r8a7791", - "renesas,rcar-gen2-hscif", "renesas,hscif"; - reg = <0 0xe62c8000 0 96>; - interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7791_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, - <&dmac1 0x4d>, <&dmac1 0x4e>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 716>; - status = "disabled"; - }; + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c50000 0 64>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>; + clock-names = "fck"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; - hscif2: serial@e62d0000 { - compatible = "renesas,hscif-r8a7791", - "renesas,rcar-gen2-hscif", "renesas,hscif"; - reg = <0 0xe62d0000 0 96>; - interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7791_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, - <&dmac1 0x3b>, <&dmac1 0x3c>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 713>; - status = "disabled"; - }; + scifa2: serial@e6c60000 { + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c60000 0 64>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>; + clock-names = "fck"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; - icram0: sram@e63a0000 { - compatible = "mmio-sram"; - reg = <0 0xe63a0000 0 0x12000>; - }; + scifa3: serial@e6c70000 { + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c70000 0 64>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1106>; + clock-names = "fck"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, + <&dmac1 0x1b>, <&dmac1 0x1c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 1106>; + status = "disabled"; + }; - icram1: sram@e63c0000 { - compatible = "mmio-sram"; - reg = <0 0xe63c0000 0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0xe63c0000 0x1000>; + scifa4: serial@e6c78000 { + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c78000 0 64>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1107>; + clock-names = "fck"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>, + <&dmac1 0x1f>, <&dmac1 0x20>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 1107>; + status = "disabled"; + }; - smp-sram@0 { - compatible = "renesas,smp-sram"; - reg = <0 0x10>; + scifa5: serial@e6c80000 { + compatible = "renesas,scifa-r8a7791", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c80000 0 64>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1108>; + clock-names = "fck"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>, + <&dmac1 0x23>, <&dmac1 0x24>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 1108>; + status = "disabled"; }; - }; - ether: ethernet@ee700000 { - compatible = "renesas,ether-r8a7791", - "renesas,rcar-gen2-ether"; - reg = <0 0xee700000 0 0x400>; - interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 813>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 813>; - phy-mode = "rmii"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + scifb0: serial@e6c20000 { + compatible = "renesas,scifb-r8a7791", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c20000 0 0x100>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>; + clock-names = "fck"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; - avb: ethernet@e6800000 { - compatible = "renesas,etheravb-r8a7791", - "renesas,etheravb-rcar-gen2"; - reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; - interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 812>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 812>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + scifb1: serial@e6c30000 { + compatible = "renesas,scifb-r8a7791", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c30000 0 0x100>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>; + clock-names = "fck"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; - sata0: sata@ee300000 { - compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata"; - reg = <0 0xee300000 0 0x2000>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 815>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 815>; - status = "disabled"; - }; + scifb2: serial@e6ce0000 { + compatible = "renesas,scifb-r8a7791", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6ce0000 0 0x100>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 216>; + clock-names = "fck"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 216>; + status = "disabled"; + }; - sata1: sata@ee500000 { - compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata"; - reg = <0 0xee500000 0 0x2000>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 814>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 814>; - status = "disabled"; - }; + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7791", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 721>; + status = "disabled"; + }; - hsusb: usb@e6590000 { - compatible = "renesas,usbhs-r8a7791", "renesas,rcar-gen2-usbhs"; - reg = <0 0xe6590000 0 0x100>; - interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 704>; - dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, - <&usb_dmac1 0>, <&usb_dmac1 1>; - dma-names = "ch0", "ch1", "ch2", "ch3"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 704>; - renesas,buswait = <4>; - phys = <&usb0 1>; - phy-names = "usb"; - status = "disabled"; - }; + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7791", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7791_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 720>; + status = "disabled"; + }; - usbphy: usb-phy@e6590100 { - compatible = "renesas,usb-phy-r8a7791", - "renesas,rcar-gen2-usb-phy"; - reg = <0 0xe6590100 0 0x100>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&cpg CPG_MOD 704>; - clock-names = "usbhs"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 704>; - status = "disabled"; + scif2: serial@e6e58000 { + compatible = "renesas,scif-r8a7791", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e58000 0 64>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7791_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 719>; + status = "disabled"; + }; - usb0: usb-channel@0 { - reg = <0>; - #phy-cells = <1>; + scif3: serial@e6ea8000 { + compatible = "renesas,scif-r8a7791", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ea8000 0 64>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7791_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>, + <&dmac1 0x2f>, <&dmac1 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 718>; + status = "disabled"; }; - usb2: usb-channel@2 { - reg = <2>; - #phy-cells = <1>; + + scif4: serial@e6ee0000 { + compatible = "renesas,scif-r8a7791", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee0000 0 64>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7791_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, + <&dmac1 0xfb>, <&dmac1 0xfc>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 715>; + status = "disabled"; }; - }; - vin0: video@e6ef0000 { - compatible = "renesas,vin-r8a7791", "renesas,rcar-gen2-vin"; - reg = <0 0xe6ef0000 0 0x1000>; - interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 811>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 811>; - status = "disabled"; - }; + scif5: serial@e6ee8000 { + compatible = "renesas,scif-r8a7791", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee8000 0 64>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7791_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, + <&dmac1 0xfd>, <&dmac1 0xfe>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 714>; + status = "disabled"; + }; - vin1: video@e6ef1000 { - compatible = "renesas,vin-r8a7791", "renesas,rcar-gen2-vin"; - reg = <0 0xe6ef1000 0 0x1000>; - interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 810>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 810>; - status = "disabled"; - }; + hscif0: serial@e62c0000 { + compatible = "renesas,hscif-r8a7791", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c0000 0 96>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7791_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 717>; + status = "disabled"; + }; - vin2: video@e6ef2000 { - compatible = "renesas,vin-r8a7791", "renesas,rcar-gen2-vin"; - reg = <0 0xe6ef2000 0 0x1000>; - interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 809>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 809>; - status = "disabled"; - }; + hscif1: serial@e62c8000 { + compatible = "renesas,hscif-r8a7791", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c8000 0 96>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7791_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + }; - vsp@fe928000 { - compatible = "renesas,vsp1"; - reg = <0 0xfe928000 0 0x8000>; - interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 131>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 131>; - }; + hscif2: serial@e62d0000 { + compatible = "renesas,hscif-r8a7791", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62d0000 0 96>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7791_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, + <&dmac1 0x3b>, <&dmac1 0x3c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 713>; + status = "disabled"; + }; - vsp@fe930000 { - compatible = "renesas,vsp1"; - reg = <0 0xfe930000 0 0x8000>; - interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 128>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 128>; - }; + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 000>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>, + <&dmac1 0x51>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - vsp@fe938000 { - compatible = "renesas,vsp1"; - reg = <0 0xfe938000 0 0x8000>; - interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 127>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 127>; - }; + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>, + <&dmac1 0x55>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - du: display@feb00000 { - compatible = "renesas,du-r8a7791"; - reg = <0 0xfeb00000 0 0x40000>, - <0 0xfeb90000 0 0x1c>; - reg-names = "du", "lvds.0"; - interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 726>; - clock-names = "du.0", "du.1", "lvds.0"; - status = "disabled"; - - ports { + msiof2: spi@e6e00000 { + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 205>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>, + <&dmac1 0x41>, <&dmac1 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 205>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; + }; - port@0 { - reg = <0>; - du_out_rgb: endpoint { - }; - }; - port@1 { - reg = <1>; - du_out_lvds0: endpoint { - }; - }; + adc: adc@e6e54000 { + compatible = "renesas,r8a7791-gyroadc", + "renesas,rcar-gyroadc"; + reg = <0 0xe6e54000 0 64>; + clocks = <&cpg CPG_MOD 901>; + clock-names = "fck"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 901>; + status = "disabled"; }; - }; - can0: can@e6e80000 { - compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can"; - reg = <0 0xe6e80000 0 0x1000>; - interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7791_CLK_RCAN>, - <&can_clk>; - clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 916>; - status = "disabled"; - }; + can0: can@e6e80000 { + compatible = "renesas,can-r8a7791", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e80000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A7791_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; - can1: can@e6e88000 { - compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can"; - reg = <0 0xe6e88000 0 0x1000>; - interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7791_CLK_RCAN>, - <&can_clk>; - clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 915>; - status = "disabled"; - }; + can1: can@e6e88000 { + compatible = "renesas,can-r8a7791", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e88000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A7791_CLK_RCAN>, <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; - jpu: jpeg-codec@fe980000 { - compatible = "renesas,jpu-r8a7791", "renesas,rcar-gen2-jpu"; - reg = <0 0xfe980000 0 0x10300>; - interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 106>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 106>; - }; + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7791", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 811>; + status = "disabled"; + }; - /* External root clock */ - extal_clk: extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7791", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 810>; + status = "disabled"; + }; - /* - * The external audio clocks are configured as 0 Hz fixed frequency - * clocks by default. - * Boards that provide audio clocks should override them. - */ - audio_clk_a: audio_clk_a { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clk_b: audio_clk_b { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clk_c: audio_clk_c { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a7791", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 809>; + status = "disabled"; + }; - /* External PCIe clock - can be overridden by the board */ - pcie_bus_clk: pcie_bus { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a7791", + "renesas,rcar_sound-gen2"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, + <&cpg CPG_CORE R8A7791_CLK_M2>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", "src.9", "src.8", + "src.7", "src.6", "src.5", "src.4", + "src.3", "src.2", "src.1", "src.0", + "ctu.0", "ctu.1", + "mix.0", "mix.1", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma1 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma1 0xbe>; + dma-names = "tx"; + }; + }; - /* External SCIF clock */ - scif_clk: scif { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; - /* External USB clock - can be overridden by the board */ - usb_extal_clk: usb_extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; - /* External CAN clock */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + rcar_sound,src { + src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; + }; - cpg: clock-controller@e6150000 { - compatible = "renesas,r8a7791-cpg-mssr"; - reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>, <&usb_extal_clk>; - clock-names = "extal", "usb_extal"; - #clock-cells = <2>; - #power-domain-cells = <0>; - #reset-cells = <1>; - }; + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, + <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, + <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, + <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, + <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, + <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, + <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, + <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, + <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, + <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, + <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + }; - rst: reset-controller@e6160000 { - compatible = "renesas,r8a7791-rst"; - reg = <0 0xe6160000 0 0x0100>; - }; + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a7791", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <13>; + }; - prr: chipid@ff000044 { - compatible = "renesas,prr"; - reg = <0 0xff000044 0 4>; - }; + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a7791", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <13>; + }; - sysc: system-controller@e6180000 { - compatible = "renesas,r8a7791-sysc"; - reg = <0 0xe6180000 0 0x0200>; - #power-domain-cells = <1>; - }; + xhci: usb@ee000000 { + compatible = "renesas,xhci-r8a7791", + "renesas,rcar-gen2-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 328>; + phys = <&usb2 1>; + phy-names = "usb"; + status = "disabled"; + }; - qspi: spi@e6b10000 { - compatible = "renesas,qspi-r8a7791", "renesas,qspi"; - reg = <0 0xe6b10000 0 0x2c>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 917>; - dmas = <&dmac0 0x17>, <&dmac0 0x18>, - <&dmac1 0x17>, <&dmac1 0x18>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 917>; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7791", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; - msiof0: spi@e6e20000 { - compatible = "renesas,msiof-r8a7791", - "renesas,rcar-gen2-msiof"; - reg = <0 0xe6e20000 0 0x0064>; - interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 000>; - dmas = <&dmac0 0x51>, <&dmac0 0x52>, - <&dmac1 0x51>, <&dmac1 0x52>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + }; - msiof1: spi@e6e10000 { - compatible = "renesas,msiof-r8a7791", - "renesas,rcar-gen2-msiof"; - reg = <0 0xe6e10000 0 0x0064>; - interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 208>; - dmas = <&dmac0 0x55>, <&dmac0 0x56>, - <&dmac1 0x55>, <&dmac1 0x56>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 208>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + pci1: pci@ee0d0000 { + compatible = "renesas,pci-r8a7791", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x10800 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; - msiof2: spi@e6e00000 { - compatible = "renesas,msiof-r8a7791", - "renesas,rcar-gen2-msiof"; - reg = <0 0xe6e00000 0 0x0064>; - interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 205>; - dmas = <&dmac0 0x41>, <&dmac0 0x42>, - <&dmac1 0x41>, <&dmac1 0x42>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 205>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + usb@2,0 { + reg = <0x11000 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + }; - xhci: usb@ee000000 { - compatible = "renesas,xhci-r8a7791", "renesas,rcar-gen2-xhci"; - reg = <0 0xee000000 0 0xc00>; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 328>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 328>; - phys = <&usb2 1>; - phy-names = "usb"; - status = "disabled"; - }; + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7791", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee100000 0 0x328>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; - pci0: pci@ee090000 { - compatible = "renesas,pci-r8a7791", "renesas,pci-rcar-gen2"; - device_type = "pci"; - reg = <0 0xee090000 0 0xc00>, - <0 0xee080000 0 0x1100>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 703>; - status = "disabled"; - - bus-range = <0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - - usb@1,0 { - reg = <0x800 0 0 0 0>; - phys = <&usb0 0>; - phy-names = "usb"; + sdhi1: sd@ee140000 { + compatible = "renesas,sdhi-r8a7791", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; }; - usb@2,0 { - reg = <0x1000 0 0 0 0>; - phys = <&usb0 0>; - phy-names = "usb"; + sdhi2: sd@ee160000 { + compatible = "renesas,sdhi-r8a7791", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee160000 0 0x100>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; }; - }; - pci1: pci@ee0d0000 { - compatible = "renesas,pci-r8a7791", "renesas,pci-rcar-gen2"; - device_type = "pci"; - reg = <0 0xee0d0000 0 0xc00>, - <0 0xee0c0000 0 0x1100>; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 703>; - status = "disabled"; - - bus-range = <1 1>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - - usb@1,0 { - reg = <0x10800 0 0 0 0>; - phys = <&usb2 0>; - phy-names = "usb"; + mmcif0: mmc@ee200000 { + compatible = "renesas,mmcif-r8a7791", + "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 315>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 315>; + reg-io-width = <4>; + status = "disabled"; + max-frequency = <97500000>; }; - usb@2,0 { - reg = <0x11000 0 0 0 0>; - phys = <&usb2 0>; - phy-names = "usb"; + sata0: sata@ee300000 { + compatible = "renesas,sata-r8a7791", + "renesas,rcar-gen2-sata"; + reg = <0 0xee300000 0 0x2000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 815>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 815>; + status = "disabled"; }; - }; - pciec: pcie@fe000000 { - compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2"; - reg = <0 0xfe000000 0 0x80000>; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x00 0xff>; - device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 - 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; - clock-names = "pcie", "pcie_bus"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 319>; - status = "disabled"; - }; + sata1: sata@ee500000 { + compatible = "renesas,sata-r8a7791", + "renesas,rcar-gen2-sata"; + reg = <0 0xee500000 0 0x2000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 814>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 814>; + status = "disabled"; + }; - ipmmu_sy0: mmu@e6280000 { - compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; - reg = <0 0xe6280000 0 0x1000>; - interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; - }; + ether: ethernet@ee700000 { + compatible = "renesas,ether-r8a7791", + "renesas,rcar-gen2-ether"; + reg = <0 0xee700000 0 0x400>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 813>; + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - ipmmu_sy1: mmu@e6290000 { - compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; - reg = <0 0xe6290000 0 0x1000>; - interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; - }; + gic: interrupt-controller@f1001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>, + <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; - ipmmu_ds: mmu@e6740000 { - compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; - reg = <0 0xe6740000 0 0x1000>; - interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; - }; + pciec: pcie@fe000000 { + compatible = "renesas,pcie-r8a7791", + "renesas,pcie-rcar-gen2"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 + 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; - ipmmu_mp: mmu@ec680000 { - compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; - reg = <0 0xec680000 0 0x1000>; - interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; - }; + vsp@fe928000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe928000 0 0x8000>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 131>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 131>; + }; - ipmmu_mx: mmu@fe951000 { - compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; - reg = <0 0xfe951000 0 0x1000>; - interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; - }; + vsp@fe930000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe930000 0 0x8000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 128>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 128>; + }; - ipmmu_rt: mmu@ffc80000 { - compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; - reg = <0 0xffc80000 0 0x1000>; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; - }; + vsp@fe938000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe938000 0 0x8000>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 127>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 127>; + }; - ipmmu_gp: mmu@e62a0000 { - compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa"; - reg = <0 0xe62a0000 0 0x1000>; - interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; - }; + jpu: jpeg-codec@fe980000 { + compatible = "renesas,jpu-r8a7791", + "renesas,rcar-gen2-jpu"; + reg = <0 0xfe980000 0 0x10300>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 106>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 106>; + }; - rcar_sound: sound@ec500000 { - /* - * #sound-dai-cells is required - * - * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; - * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; - */ - compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2"; - reg = <0 0xec500000 0 0x1000>, /* SCU */ - <0 0xec5a0000 0 0x100>, /* ADG */ - <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ - reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; - - clocks = <&cpg CPG_MOD 1005>, - <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, - <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, - <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, - <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, - <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, - <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, - <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, - <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, - <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, - <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, - <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, - <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, - <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, - <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, - <&cpg CPG_CORE R8A7791_CLK_M2>; - clock-names = "ssi-all", - "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", - "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", - "src.9", "src.8", "src.7", "src.6", "src.5", - "src.4", "src.3", "src.2", "src.1", "src.0", - "ctu.0", "ctu.1", - "mix.0", "mix.1", - "dvc.0", "dvc.1", - "clk_a", "clk_b", "clk_c", "clk_i"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 1005>, - <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>, - <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>, - <&cpg 1014>, <&cpg 1015>; - reset-names = "ssi-all", - "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", - "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0"; - - status = "disabled"; - - rcar_sound,dvc { - dvc0: dvc-0 { - dmas = <&audma1 0xbc>; - dma-names = "tx"; - }; - dvc1: dvc-1 { - dmas = <&audma1 0xbe>; - dma-names = "tx"; + du: display@feb00000 { + compatible = "renesas,du-r8a7791"; + reg = <0 0xfeb00000 0 0x40000>, + <0 0xfeb90000 0 0x1c>; + reg-names = "du", "lvds.0"; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 726>; + clock-names = "du.0", "du.1", "lvds.0"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + }; + }; }; }; - rcar_sound,mix { - mix0: mix-0 { }; - mix1: mix-1 { }; + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; }; - rcar_sound,ctu { - ctu00: ctu-0 { }; - ctu01: ctu-1 { }; - ctu02: ctu-2 { }; - ctu03: ctu-3 { }; - ctu10: ctu-4 { }; - ctu11: ctu-5 { }; - ctu12: ctu-6 { }; - ctu13: ctu-7 { }; + cmt0: timer@ffca0000 { + compatible = "renesas,r8a7791-cmt0", + "renesas,rcar-gen2-cmt0"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 124>; + + status = "disabled"; }; - rcar_sound,src { - src0: src-0 { - interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x85>, <&audma1 0x9a>; - dma-names = "rx", "tx"; - }; - src1: src-1 { - interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x87>, <&audma1 0x9c>; - dma-names = "rx", "tx"; - }; - src2: src-2 { - interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x89>, <&audma1 0x9e>; - dma-names = "rx", "tx"; - }; - src3: src-3 { - interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x8b>, <&audma1 0xa0>; - dma-names = "rx", "tx"; - }; - src4: src-4 { - interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x8d>, <&audma1 0xb0>; - dma-names = "rx", "tx"; - }; - src5: src-5 { - interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x8f>, <&audma1 0xb2>; - dma-names = "rx", "tx"; - }; - src6: src-6 { - interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x91>, <&audma1 0xb4>; - dma-names = "rx", "tx"; - }; - src7: src-7 { - interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x93>, <&audma1 0xb6>; - dma-names = "rx", "tx"; - }; - src8: src-8 { - interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x95>, <&audma1 0xb8>; - dma-names = "rx", "tx"; - }; - src9: src-9 { - interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x97>, <&audma1 0xba>; - dma-names = "rx", "tx"; - }; + cmt1: timer@e6130000 { + compatible = "renesas,r8a7791-cmt1", + "renesas,rcar-gen2-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 329>; + clock-names = "fck"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 329>; + + status = "disabled"; }; + }; - rcar_sound,ssi { - ssi0: ssi-0 { - interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi1: ssi-1 { - interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi2: ssi-2 { - interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi3: ssi-3 { - interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi4: ssi-4 { - interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi5: ssi-5 { - interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi6: ssi-6 { - interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi7: ssi-7 { - interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi8: ssi-8 { - interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; - dma-names = "rx", "tx", "rxu", "txu"; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <95000>; + hysteresis = <0>; + type = "critical"; + }; }; - ssi9: ssi-9 { - interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; - dma-names = "rx", "tx", "rxu", "txu"; + cooling-maps { }; }; }; + + timer { + compatible = "arm,armv7-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; }; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 3be15a158bad1..268987ff02017 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -101,63 +101,6 @@ #size-cells = <2>; ranges; - apmu@e6152000 { - compatible = "renesas,r8a7792-apmu", "renesas,apmu"; - reg = <0 0xe6152000 0 0x188>; - cpus = <&cpu0 &cpu1>; - }; - - gic: interrupt-controller@f1001000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x2000>, - <0 0xf1004000 0 0x2000>, - <0 0xf1006000 0 0x2000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_HIGH)>; - clocks = <&cpg CPG_MOD 408>; - clock-names = "clk"; - power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; - resets = <&cpg 408>; - }; - - irqc: interrupt-controller@e61c0000 { - compatible = "renesas,irqc-r8a7792", "renesas,irqc"; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 407>; - power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; - resets = <&cpg 407>; - }; - - rst: reset-controller@e6160000 { - compatible = "renesas,r8a7792-rst"; - reg = <0 0xe6160000 0 0x0100>; - }; - - prr: chipid@ff000044 { - compatible = "renesas,prr"; - reg = <0 0xff000044 0 4>; - }; - - sysc: system-controller@e6180000 { - compatible = "renesas,r8a7792-sysc"; - reg = <0 0xe6180000 0 0x0200>; - #power-domain-cells = <1>; - }; - - pfc: pin-controller@e6060000 { - compatible = "renesas,pfc-r8a7792"; - reg = <0 0xe6060000 0 0x144>; - }; - gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7792", "renesas,rcar-gen2-gpio"; @@ -338,6 +281,155 @@ resets = <&cpg 913>; }; + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a7792"; + reg = <0 0xe6060000 0 0x144>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7792-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + apmu@e6152000 { + compatible = "renesas,r8a7792-apmu", "renesas,apmu"; + reg = <0 0xe6152000 0 0x188>; + cpus = <&cpu0 &cpu1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7792-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7792-sysc"; + reg = <0 0xe6180000 0 0x0200>; + #power-domain-cells = <1>; + }; + + irqc: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7792", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + + icram0: sram@e63a0000 { + compatible = "mmio-sram"; + reg = <0 0xe63a0000 0 0x12000>; + }; + + icram1: sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0 0xe63c0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63c0000 0x1000>; + + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x10>; + }; + }; + + /* I2C doesn't need pinmux */ + i2c0: i2c@e6508000 { + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 931>; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e6518000 { + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6518000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 930>; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e6530000 { + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6530000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 929>; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e6540000 { + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6540000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 928>; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@e6520000 { + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6520000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 927>; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@e6528000 { + compatible = "renesas,i2c-r8a7792", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6528000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 925>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 925>; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7792", "renesas,rcar-dmac"; @@ -404,6 +496,35 @@ dma-channels = <15>; }; + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7792", + "renesas,etheravb-rcar-gen2"; + reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 812>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7792", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 917>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + scif0: serial@e6e60000 { compatible = "renesas,scif-r8a7792", "renesas,rcar-gen2-scif", "renesas,scif"; @@ -500,162 +621,6 @@ status = "disabled"; }; - icram0: sram@e63a0000 { - compatible = "mmio-sram"; - reg = <0 0xe63a0000 0 0x12000>; - }; - - icram1: sram@e63c0000 { - compatible = "mmio-sram"; - reg = <0 0xe63c0000 0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0xe63c0000 0x1000>; - - smp-sram@0 { - compatible = "renesas,smp-sram"; - reg = <0 0x10>; - }; - }; - - sdhi0: sd@ee100000 { - compatible = "renesas,sdhi-r8a7792", - "renesas,rcar-gen2-sdhi"; - reg = <0 0xee100000 0 0x328>; - interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dmac0 0xcd>, <&dmac0 0xce>, - <&dmac1 0xcd>, <&dmac1 0xce>; - dma-names = "tx", "rx", "tx", "rx"; - clocks = <&cpg CPG_MOD 314>; - power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; - resets = <&cpg 314>; - status = "disabled"; - }; - - jpu: jpeg-codec@fe980000 { - compatible = "renesas,jpu-r8a7792", - "renesas,rcar-gen2-jpu"; - reg = <0 0xfe980000 0 0x10300>; - interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 106>; - power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; - resets = <&cpg 106>; - }; - - avb: ethernet@e6800000 { - compatible = "renesas,etheravb-r8a7792", - "renesas,etheravb-rcar-gen2"; - reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; - interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 812>; - power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; - resets = <&cpg 812>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - /* I2C doesn't need pinmux */ - i2c0: i2c@e6508000 { - compatible = "renesas,i2c-r8a7792", - "renesas,rcar-gen2-i2c"; - reg = <0 0xe6508000 0 0x40>; - interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 931>; - power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; - resets = <&cpg 931>; - i2c-scl-internal-delay-ns = <6>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c1: i2c@e6518000 { - compatible = "renesas,i2c-r8a7792", - "renesas,rcar-gen2-i2c"; - reg = <0 0xe6518000 0 0x40>; - interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 930>; - power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; - resets = <&cpg 930>; - i2c-scl-internal-delay-ns = <6>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c2: i2c@e6530000 { - compatible = "renesas,i2c-r8a7792", - "renesas,rcar-gen2-i2c"; - reg = <0 0xe6530000 0 0x40>; - interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 929>; - power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; - resets = <&cpg 929>; - i2c-scl-internal-delay-ns = <6>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c3: i2c@e6540000 { - compatible = "renesas,i2c-r8a7792", - "renesas,rcar-gen2-i2c"; - reg = <0 0xe6540000 0 0x40>; - interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 928>; - power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; - resets = <&cpg 928>; - i2c-scl-internal-delay-ns = <6>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c4: i2c@e6520000 { - compatible = "renesas,i2c-r8a7792", - "renesas,rcar-gen2-i2c"; - reg = <0 0xe6520000 0 0x40>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 927>; - power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; - resets = <&cpg 927>; - i2c-scl-internal-delay-ns = <6>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c5: i2c@e6528000 { - compatible = "renesas,i2c-r8a7792", - "renesas,rcar-gen2-i2c"; - reg = <0 0xe6528000 0 0x40>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 925>; - power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; - resets = <&cpg 925>; - i2c-scl-internal-delay-ns = <110>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - qspi: spi@e6b10000 { - compatible = "renesas,qspi-r8a7792", "renesas,qspi"; - reg = <0 0xe6b10000 0 0x2c>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 917>; - dmas = <&dmac0 0x17>, <&dmac0 0x18>, - <&dmac1 0x17>, <&dmac1 0x18>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; - resets = <&cpg 917>; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7792", "renesas,rcar-gen2-msiof"; @@ -688,34 +653,6 @@ status = "disabled"; }; - du: display@feb00000 { - compatible = "renesas,du-r8a7792"; - reg = <0 0xfeb00000 0 0x40000>; - reg-names = "du"; - interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; - clock-names = "du.0", "du.1"; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - du_out_rgb0: endpoint { - }; - }; - port@1 { - reg = <1>; - du_out_rgb1: endpoint { - }; - }; - }; - }; - can0: can@e6e80000 { compatible = "renesas,can-r8a7792", "renesas,rcar-gen2-can"; @@ -808,6 +745,36 @@ status = "disabled"; }; + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7792", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee100000 0 0x328>; + interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + clocks = <&cpg CPG_MOD 314>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x2000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + vsp@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; @@ -835,14 +802,47 @@ resets = <&cpg 127>; }; - cpg: clock-controller@e6150000 { - compatible = "renesas,r8a7792-cpg-mssr"; - reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>; - clock-names = "extal"; - #clock-cells = <2>; - #power-domain-cells = <0>; - #reset-cells = <1>; + jpu: jpeg-codec@fe980000 { + compatible = "renesas,jpu-r8a7792", + "renesas,rcar-gen2-jpu"; + reg = <0 0xfe980000 0 0x10300>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 106>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 106>; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a7792"; + reg = <0 0xfeb00000 0 0x40000>; + reg-names = "du"; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb0: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_rgb1: endpoint { + }; + }; + }; + }; + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; }; }; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 51b3ffac8efaa..9ed6961f2d9a2 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -48,6 +48,10 @@ aliases { serial0 = &scif0; serial1 = &scif1; + i2c9 = &gpioi2c2; + i2c10 = &gpioi2c4; + i2c11 = &i2chdmi; + i2c12 = &i2cexio4; }; chosen { @@ -296,6 +300,146 @@ #clock-cells = <0>; clock-frequency = <148500000>; }; + + gpioi2c2: i2c-9 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + status = "disabled"; + scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <5>; + }; + + gpioi2c4: i2c-10 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + status = "disabled"; + scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <5>; + }; + + /* + * A fallback to GPIO is provided for I2C2. + */ + i2chdmi: i2c-11 { + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&i2c2>, <&gpioi2c2>; + i2c-bus-name = "i2c-hdmi"; + #address-cells = <1>; + #size-cells = <0>; + + ak4643: codec@12 { + compatible = "asahi-kasei,ak4643"; + #sound-dai-cells = <0>; + reg = <0x12>; + }; + + composite-in@20 { + compatible = "adi,adv7180cp"; + reg = <0x20>; + remote = <&vin1>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7180_in: endpoint { + remote-endpoint = <&composite_con_in>; + }; + }; + + port@3 { + reg = <3>; + adv7180_out: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep>; + }; + }; + }; + }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio3>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + + hdmi-in@4c { + compatible = "adi,adv7612"; + reg = <0x4c>; + interrupt-parent = <&gpio4>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + default-input = <0>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7612_in: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + + port@2 { + reg = <2>; + adv7612_out: endpoint { + remote-endpoint = <&vin0ep2>; + }; + }; + }; + }; + + eeprom@50 { + compatible = "renesas,r1ex24002", "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + }; + + /* + * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA). + * A fallback to GPIO is provided. + */ + i2cexio4: i2c-12 { + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&i2c4>, <&gpioi2c4>; + i2c-bus-name = "i2c-exio4"; + #address-cells = <1>; + #size-cells = <0>; + }; }; &du { @@ -334,6 +478,11 @@ function = "i2c2"; }; + i2c4_pins: i2c4 { + groups = "i2c4_c"; + function = "i2c4"; + }; + du_pins: du { groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; function = "du"; @@ -544,107 +693,11 @@ &i2c2 { pinctrl-0 = <&i2c2_pins>; - pinctrl-names = "default"; + pinctrl-names = "i2c-hdmi"; status = "okay"; clock-frequency = <100000>; - ak4643: codec@12 { - compatible = "asahi-kasei,ak4643"; - #sound-dai-cells = <0>; - reg = <0x12>; - }; - - composite-in@20 { - compatible = "adi,adv7180cp"; - reg = <0x20>; - remote = <&vin1>; - - port { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7180_in: endpoint { - remote-endpoint = <&composite_con_in>; - }; - }; - - port@3 { - reg = <3>; - adv7180_out: endpoint { - bus-width = <8>; - remote-endpoint = <&vin1ep>; - }; - }; - }; - }; - - hdmi@39 { - compatible = "adi,adv7511w"; - reg = <0x39>; - interrupt-parent = <&gpio3>; - interrupts = <29 IRQ_TYPE_LEVEL_LOW>; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511_in: endpoint { - remote-endpoint = <&du_out_rgb>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_con_out>; - }; - }; - }; - }; - - hdmi-in@4c { - compatible = "adi,adv7612"; - reg = <0x4c>; - interrupt-parent = <&gpio4>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - default-input = <0>; - - port { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7612_in: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; - }; - - port@2 { - reg = <2>; - adv7612_out: endpoint { - remote-endpoint = <&vin0ep2>; - }; - }; - }; - }; - - eeprom@50 { - compatible = "renesas,r1ex24002", "atmel,24c02"; - reg = <0x50>; - pagesize = <16>; - }; }; &i2c6 { @@ -668,6 +721,11 @@ }; }; +&i2c4 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "i2c-exio4"; +}; + &rcar_sound { pinctrl-0 = <&sound_pins &sound_clk_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 039b225175262..f9c5a557107d9 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -15,7 +15,6 @@ / { compatible = "renesas,r8a7793"; - interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; @@ -32,6 +31,35 @@ spi0 = &qspi; }; + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -74,1261 +102,1295 @@ }; }; - apmu@e6152000 { - compatible = "renesas,r8a7793-apmu", "renesas,apmu"; - reg = <0 0xe6152000 0 0x188>; - cpus = <&cpu0 &cpu1>; + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; - thermal-sensors = <&thermal>; + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7793", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; - trips { - cpu-crit { - temperature = <95000>; - hysteresis = <0>; - type = "critical"; - }; - }; - cooling-maps { - }; + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7793", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 911>; }; - }; - gic: interrupt-controller@f1001000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x2000>, - <0 0xf1004000 0 0x2000>, - <0 0xf1006000 0 0x2000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; - clocks = <&cpg CPG_MOD 408>; - clock-names = "clk"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 408>; - }; + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7793", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; - gpio0: gpio@e6050000 { - compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6050000 0 0x50>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 0 32>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 912>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 912>; - }; + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7793", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; - gpio1: gpio@e6051000 { - compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6051000 0 0x50>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 32 26>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 911>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 911>; - }; + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7793", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; - gpio2: gpio@e6052000 { - compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6052000 0 0x50>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 64 32>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 910>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 910>; - }; + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7793", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; - gpio3: gpio@e6053000 { - compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6053000 0 0x50>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 96 32>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 909>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 909>; - }; + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a7793", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 905>; + }; - gpio4: gpio@e6054000 { - compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6054000 0 0x50>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 128 32>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 908>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 908>; - }; + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a7793", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 904>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 904>; + }; - gpio5: gpio@e6055000 { - compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6055000 0 0x50>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 160 32>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 907>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 907>; - }; + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a7793"; + reg = <0 0xe6060000 0 0x250>; + }; - gpio6: gpio@e6055400 { - compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6055400 0 0x50>; - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 192 32>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 905>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 905>; - }; + /* Special CPG clocks */ + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7793-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; - gpio7: gpio@e6055800 { - compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6055800 0 0x50>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 224 26>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 904>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 904>; - }; + apmu@e6152000 { + compatible = "renesas,r8a7793-apmu", "renesas,apmu"; + reg = <0 0xe6152000 0 0x188>; + cpus = <&cpu0 &cpu1>; + }; - thermal: thermal@e61f0000 { - compatible = "renesas,thermal-r8a7793", - "renesas,rcar-gen2-thermal", - "renesas,rcar-thermal"; - reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 522>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 522>; - #thermal-sensor-cells = <0>; - }; + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7793-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; - }; + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7793-sysc"; + reg = <0 0xe6180000 0 0x0200>; + #power-domain-cells = <1>; + }; - cmt0: timer@ffca0000 { - compatible = "renesas,r8a7793-cmt0", "renesas,rcar-gen2-cmt0"; - reg = <0 0xffca0000 0 0x1004>; - interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 124>; - clock-names = "fck"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 124>; - - status = "disabled"; - }; + irqc0: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7793", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; - cmt1: timer@e6130000 { - compatible = "renesas,r8a7793-cmt1", "renesas,rcar-gen2-cmt1"; - reg = <0 0xe6130000 0 0x1004>; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 329>; - clock-names = "fck"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 329>; - - status = "disabled"; - }; + thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7793", + "renesas,rcar-gen2-thermal", + "renesas,rcar-thermal"; + reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <0>; + }; - irqc0: interrupt-controller@e61c0000 { - compatible = "renesas,irqc-r8a7793", "renesas,irqc"; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 407>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 407>; - }; + ipmmu_sy0: mmu@e6280000 { + compatible = "renesas,ipmmu-r8a7793", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6280000 0 0x1000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - dmac0: dma-controller@e6700000 { - compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; - reg = <0 0xe6700000 0 0x20000>; - interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12", "ch13", "ch14"; - clocks = <&cpg CPG_MOD 219>; - clock-names = "fck"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 219>; - #dma-cells = <1>; - dma-channels = <15>; - }; + ipmmu_sy1: mmu@e6290000 { + compatible = "renesas,ipmmu-r8a7793", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6290000 0 0x1000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - dmac1: dma-controller@e6720000 { - compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; - reg = <0 0xe6720000 0 0x20000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12", "ch13", "ch14"; - clocks = <&cpg CPG_MOD 218>; - clock-names = "fck"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 218>; - #dma-cells = <1>; - dma-channels = <15>; - }; + ipmmu_ds: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a7793", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6740000 0 0x1000>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - audma0: dma-controller@ec700000 { - compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; - reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12"; - clocks = <&cpg CPG_MOD 502>; - clock-names = "fck"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 502>; - #dma-cells = <1>; - dma-channels = <13>; - }; + ipmmu_mp: mmu@ec680000 { + compatible = "renesas,ipmmu-r8a7793", + "renesas,ipmmu-vmsa"; + reg = <0 0xec680000 0 0x1000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - audma1: dma-controller@ec720000 { - compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac"; - reg = <0 0xec720000 0 0x10000>; - interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12"; - clocks = <&cpg CPG_MOD 501>; - clock-names = "fck"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 501>; - #dma-cells = <1>; - dma-channels = <13>; - }; + ipmmu_mx: mmu@fe951000 { + compatible = "renesas,ipmmu-r8a7793", + "renesas,ipmmu-vmsa"; + reg = <0 0xfe951000 0 0x1000>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - /* The memory map in the User's Manual maps the cores to bus numbers */ - i2c0: i2c@e6508000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6508000 0 0x40>; - interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 931>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 931>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; + ipmmu_rt: mmu@ffc80000 { + compatible = "renesas,ipmmu-r8a7793", + "renesas,ipmmu-vmsa"; + reg = <0 0xffc80000 0 0x1000>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - i2c1: i2c@e6518000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6518000 0 0x40>; - interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 930>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 930>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; + ipmmu_gp: mmu@e62a0000 { + compatible = "renesas,ipmmu-r8a7793", + "renesas,ipmmu-vmsa"; + reg = <0 0xe62a0000 0 0x1000>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - i2c2: i2c@e6530000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6530000 0 0x40>; - interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 929>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 929>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; + icram0: sram@e63a0000 { + compatible = "mmio-sram"; + reg = <0 0xe63a0000 0 0x12000>; + }; - i2c3: i2c@e6540000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6540000 0 0x40>; - interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 928>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 928>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; + icram1: sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0 0xe63c0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63c0000 0x1000>; - i2c4: i2c@e6520000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6520000 0 0x40>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 927>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 927>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x10>; + }; + }; - i2c5: i2c@e6528000 { - /* doesn't need pinmux */ - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,i2c-r8a7793", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6528000 0 0x40>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 925>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 925>; - i2c-scl-internal-delay-ns = <110>; - status = "disabled"; - }; + /* The memory map in the User's Manual maps the cores to + * bus numbers + */ + i2c0: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 931>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; - i2c6: i2c@e60b0000 { - /* doesn't need pinmux */ - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,iic-r8a7793", "renesas,rcar-gen2-iic", - "renesas,rmobile-iic"; - reg = <0 0xe60b0000 0 0x425>; - interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 926>; - dmas = <&dmac0 0x77>, <&dmac0 0x78>, - <&dmac1 0x77>, <&dmac1 0x78>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 926>; - status = "disabled"; - }; + i2c1: i2c@e6518000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6518000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 930>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; - i2c7: i2c@e6500000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,iic-r8a7793", "renesas,rcar-gen2-iic", - "renesas,rmobile-iic"; - reg = <0 0xe6500000 0 0x425>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 318>; - dmas = <&dmac0 0x61>, <&dmac0 0x62>, - <&dmac1 0x61>, <&dmac1 0x62>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 318>; - status = "disabled"; - }; + i2c2: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6530000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 929>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; - i2c8: i2c@e6510000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,iic-r8a7793", "renesas,rcar-gen2-iic", - "renesas,rmobile-iic"; - reg = <0 0xe6510000 0 0x425>; - interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 323>; - dmas = <&dmac0 0x65>, <&dmac0 0x66>, - <&dmac1 0x65>, <&dmac1 0x66>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 323>; - status = "disabled"; - }; + i2c3: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6540000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 928>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; - pfc: pin-controller@e6060000 { - compatible = "renesas,pfc-r8a7793"; - reg = <0 0xe6060000 0 0x250>; - }; + i2c4: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6520000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 927>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; - sdhi0: sd@ee100000 { - compatible = "renesas,sdhi-r8a7793", - "renesas,rcar-gen2-sdhi"; - reg = <0 0xee100000 0 0x328>; - interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 314>; - dmas = <&dmac0 0xcd>, <&dmac0 0xce>, - <&dmac1 0xcd>, <&dmac1 0xce>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <195000000>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 314>; - status = "disabled"; - }; + i2c5: i2c@e6528000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7793", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6528000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 925>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 925>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; - sdhi1: sd@ee140000 { - compatible = "renesas,sdhi-r8a7793", - "renesas,rcar-gen2-sdhi"; - reg = <0 0xee140000 0 0x100>; - interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 312>; - dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, - <&dmac1 0xc1>, <&dmac1 0xc2>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <97500000>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 312>; - status = "disabled"; - }; + i2c6: i2c@e60b0000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7793", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + dmas = <&dmac0 0x77>, <&dmac0 0x78>, + <&dmac1 0x77>, <&dmac1 0x78>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 926>; + status = "disabled"; + }; - sdhi2: sd@ee160000 { - compatible = "renesas,sdhi-r8a7793", - "renesas,rcar-gen2-sdhi"; - reg = <0 0xee160000 0 0x100>; - interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 311>; - dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, - <&dmac1 0xd3>, <&dmac1 0xd4>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <97500000>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 311>; - status = "disabled"; - }; + i2c7: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7793", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; - mmcif0: mmc@ee200000 { - compatible = "renesas,mmcif-r8a7793", "renesas,sh-mmcif"; - reg = <0 0xee200000 0 0x80>; - interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 315>; - dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, - <&dmac1 0xd1>, <&dmac1 0xd2>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 315>; - reg-io-width = <4>; - status = "disabled"; - max-frequency = <97500000>; - }; + i2c8: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7793", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 323>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 323>; + status = "disabled"; + }; - scifa0: serial@e6c40000 { - compatible = "renesas,scifa-r8a7793", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c40000 0 64>; - interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 204>; - clock-names = "fck"; - dmas = <&dmac0 0x21>, <&dmac0 0x22>, - <&dmac1 0x21>, <&dmac1 0x22>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 204>; - status = "disabled"; - }; + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a7793", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <15>; + }; - scifa1: serial@e6c50000 { - compatible = "renesas,scifa-r8a7793", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c50000 0 64>; - interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 203>; - clock-names = "fck"; - dmas = <&dmac0 0x25>, <&dmac0 0x26>, - <&dmac1 0x25>, <&dmac1 0x26>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 203>; - status = "disabled"; - }; + dmac1: dma-controller@e6720000 { + compatible = "renesas,dmac-r8a7793", + "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <15>; + }; - scifa2: serial@e6c60000 { - compatible = "renesas,scifa-r8a7793", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c60000 0 64>; - interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 202>; - clock-names = "fck"; - dmas = <&dmac0 0x27>, <&dmac0 0x28>, - <&dmac1 0x27>, <&dmac1 0x28>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 202>; - status = "disabled"; - }; + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7793", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 917>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - scifa3: serial@e6c70000 { - compatible = "renesas,scifa-r8a7793", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c70000 0 64>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 1106>; - clock-names = "fck"; - dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, - <&dmac1 0x1b>, <&dmac1 0x1c>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 1106>; - status = "disabled"; - }; + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c40000 0 64>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>; + clock-names = "fck"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; - scifa4: serial@e6c78000 { - compatible = "renesas,scifa-r8a7793", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c78000 0 64>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 1107>; - clock-names = "fck"; - dmas = <&dmac0 0x1f>, <&dmac0 0x20>, - <&dmac1 0x1f>, <&dmac1 0x20>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 1107>; - status = "disabled"; - }; + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c50000 0 64>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>; + clock-names = "fck"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; - scifa5: serial@e6c80000 { - compatible = "renesas,scifa-r8a7793", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c80000 0 64>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 1108>; - clock-names = "fck"; - dmas = <&dmac0 0x23>, <&dmac0 0x24>, - <&dmac1 0x23>, <&dmac1 0x24>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 1108>; - status = "disabled"; - }; + scifa2: serial@e6c60000 { + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c60000 0 64>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>; + clock-names = "fck"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; - scifb0: serial@e6c20000 { - compatible = "renesas,scifb-r8a7793", - "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c20000 0 0x100>; - interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 206>; - clock-names = "fck"; - dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, - <&dmac1 0x3d>, <&dmac1 0x3e>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 206>; - status = "disabled"; - }; + scifa3: serial@e6c70000 { + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c70000 0 64>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1106>; + clock-names = "fck"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, + <&dmac1 0x1b>, <&dmac1 0x1c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 1106>; + status = "disabled"; + }; - scifb1: serial@e6c30000 { - compatible = "renesas,scifb-r8a7793", - "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c30000 0 0x100>; - interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 207>; - clock-names = "fck"; - dmas = <&dmac0 0x19>, <&dmac0 0x1a>, - <&dmac1 0x19>, <&dmac1 0x1a>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 207>; - status = "disabled"; - }; + scifa4: serial@e6c78000 { + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c78000 0 64>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1107>; + clock-names = "fck"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>, + <&dmac1 0x1f>, <&dmac1 0x20>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 1107>; + status = "disabled"; + }; - scifb2: serial@e6ce0000 { - compatible = "renesas,scifb-r8a7793", - "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6ce0000 0 0x100>; - interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 216>; - clock-names = "fck"; - dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, - <&dmac1 0x1d>, <&dmac1 0x1e>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 216>; - status = "disabled"; - }; + scifa5: serial@e6c80000 { + compatible = "renesas,scifa-r8a7793", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c80000 0 64>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1108>; + clock-names = "fck"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>, + <&dmac1 0x23>, <&dmac1 0x24>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 1108>; + status = "disabled"; + }; - scif0: serial@e6e60000 { - compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", - "renesas,scif"; - reg = <0 0xe6e60000 0 64>; - interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7793_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x29>, <&dmac0 0x2a>, - <&dmac1 0x29>, <&dmac1 0x2a>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 721>; - status = "disabled"; - }; + scifb0: serial@e6c20000 { + compatible = "renesas,scifb-r8a7793", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c20000 0 0x100>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>; + clock-names = "fck"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; - scif1: serial@e6e68000 { - compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", - "renesas,scif"; - reg = <0 0xe6e68000 0 64>; - interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7793_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, - <&dmac1 0x2d>, <&dmac1 0x2e>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 720>; - status = "disabled"; - }; + scifb1: serial@e6c30000 { + compatible = "renesas,scifb-r8a7793", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c30000 0 0x100>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>; + clock-names = "fck"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; - scif2: serial@e6e58000 { - compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", - "renesas,scif"; - reg = <0 0xe6e58000 0 64>; - interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7793_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, - <&dmac1 0x2b>, <&dmac1 0x2c>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 719>; - status = "disabled"; - }; + scifb2: serial@e6ce0000 { + compatible = "renesas,scifb-r8a7793", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6ce0000 0 0x100>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 216>; + clock-names = "fck"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 216>; + status = "disabled"; + }; - scif3: serial@e6ea8000 { - compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", - "renesas,scif"; - reg = <0 0xe6ea8000 0 64>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7793_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2f>, <&dmac0 0x30>, - <&dmac1 0x2f>, <&dmac1 0x30>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 718>; - status = "disabled"; - }; + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7793", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7793_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 721>; + status = "disabled"; + }; - scif4: serial@e6ee0000 { - compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", - "renesas,scif"; - reg = <0 0xe6ee0000 0 64>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7793_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, - <&dmac1 0xfb>, <&dmac1 0xfc>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 715>; - status = "disabled"; - }; + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7793", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7793_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 720>; + status = "disabled"; + }; - scif5: serial@e6ee8000 { - compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif", - "renesas,scif"; - reg = <0 0xe6ee8000 0 64>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7793_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, - <&dmac1 0xfd>, <&dmac1 0xfe>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 714>; - status = "disabled"; - }; + scif2: serial@e6e58000 { + compatible = "renesas,scif-r8a7793", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e58000 0 64>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7793_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 719>; + status = "disabled"; + }; - hscif0: serial@e62c0000 { - compatible = "renesas,hscif-r8a7793", - "renesas,rcar-gen2-hscif", "renesas,hscif"; - reg = <0 0xe62c0000 0 96>; - interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7793_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x39>, <&dmac0 0x3a>, - <&dmac1 0x39>, <&dmac1 0x3a>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 717>; - status = "disabled"; - }; + scif3: serial@e6ea8000 { + compatible = "renesas,scif-r8a7793", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ea8000 0 64>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7793_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>, + <&dmac1 0x2f>, <&dmac1 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 718>; + status = "disabled"; + }; - hscif1: serial@e62c8000 { - compatible = "renesas,hscif-r8a7793", - "renesas,rcar-gen2-hscif", "renesas,hscif"; - reg = <0 0xe62c8000 0 96>; - interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7793_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, - <&dmac1 0x4d>, <&dmac1 0x4e>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 716>; - status = "disabled"; - }; + scif4: serial@e6ee0000 { + compatible = "renesas,scif-r8a7793", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee0000 0 64>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7793_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, + <&dmac1 0xfb>, <&dmac1 0xfc>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 715>; + status = "disabled"; + }; - hscif2: serial@e62d0000 { - compatible = "renesas,hscif-r8a7793", - "renesas,rcar-gen2-hscif", "renesas,hscif"; - reg = <0 0xe62d0000 0 96>; - interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7793_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, - <&dmac1 0x3b>, <&dmac1 0x3c>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 713>; - status = "disabled"; - }; + scif5: serial@e6ee8000 { + compatible = "renesas,scif-r8a7793", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee8000 0 64>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7793_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, + <&dmac1 0xfd>, <&dmac1 0xfe>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 714>; + status = "disabled"; + }; - icram0: sram@e63a0000 { - compatible = "mmio-sram"; - reg = <0 0xe63a0000 0 0x12000>; - }; + hscif0: serial@e62c0000 { + compatible = "renesas,hscif-r8a7793", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c0000 0 96>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7793_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 717>; + status = "disabled"; + }; - icram1: sram@e63c0000 { - compatible = "mmio-sram"; - reg = <0 0xe63c0000 0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0xe63c0000 0x1000>; + hscif1: serial@e62c8000 { + compatible = "renesas,hscif-r8a7793", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c8000 0 96>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7793_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + }; - smp-sram@0 { - compatible = "renesas,smp-sram"; - reg = <0 0x10>; + hscif2: serial@e62d0000 { + compatible = "renesas,hscif-r8a7793", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62d0000 0 96>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7793_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, + <&dmac1 0x3b>, <&dmac1 0x3c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 713>; + status = "disabled"; }; - }; - ether: ethernet@ee700000 { - compatible = "renesas,ether-r8a7793", - "renesas,rcar-gen2-ether"; - reg = <0 0xee700000 0 0x400>; - interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 813>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 813>; - phy-mode = "rmii"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + can0: can@e6e80000 { + compatible = "renesas,can-r8a7793", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e80000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7793_CLK_RCAN>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; - vin0: video@e6ef0000 { - compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin"; - reg = <0 0xe6ef0000 0 0x1000>; - interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 811>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 811>; - status = "disabled"; - }; + can1: can@e6e88000 { + compatible = "renesas,can-r8a7793", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e88000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7793_CLK_RCAN>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; - vin1: video@e6ef1000 { - compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin"; - reg = <0 0xe6ef1000 0 0x1000>; - interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 810>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 810>; - status = "disabled"; - }; + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7793", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 811>; + status = "disabled"; + }; - vin2: video@e6ef2000 { - compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin"; - reg = <0 0xe6ef2000 0 0x1000>; - interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 809>; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 809>; - status = "disabled"; - }; + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7793", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 810>; + status = "disabled"; + }; - qspi: spi@e6b10000 { - compatible = "renesas,qspi-r8a7793", "renesas,qspi"; - reg = <0 0xe6b10000 0 0x2c>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 917>; - dmas = <&dmac0 0x17>, <&dmac0 0x18>, - <&dmac1 0x17>, <&dmac1 0x18>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 917>; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a7793", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 809>; + status = "disabled"; + }; - du: display@feb00000 { - compatible = "renesas,du-r8a7793"; - reg = <0 0xfeb00000 0 0x40000>, - <0 0xfeb90000 0 0x1c>; - reg-names = "du", "lvds.0"; - interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 726>; - clock-names = "du.0", "du.1", "lvds.0"; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a7793", + "renesas,rcar_sound-gen2"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, + <&cpg CPG_CORE R8A7793_CLK_M2>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma1 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma1 0xbe>; + dma-names = "tx"; + }; + }; - port@0 { - reg = <0>; - du_out_rgb: endpoint { + rcar_sound,src { + src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; }; }; - port@1 { - reg = <1>; - du_out_lvds0: endpoint { + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, + <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, + <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, + <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, + <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, + <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, + <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, + <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, + <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, + <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, + <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; }; }; }; - }; - can0: can@e6e80000 { - compatible = "renesas,can-r8a7793", "renesas,rcar-gen2-can"; - reg = <0 0xe6e80000 0 0x1000>; - interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7793_CLK_RCAN>, - <&can_clk>; - clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 916>; - status = "disabled"; - }; - - can1: can@e6e88000 { - compatible = "renesas,can-r8a7793", "renesas,rcar-gen2-can"; - reg = <0 0xe6e88000 0 0x1000>; - interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7793_CLK_RCAN>, - <&can_clk>; - clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 915>; - status = "disabled"; - }; - - /* External root clock */ - extal_clk: extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; - - /* - * The external audio clocks are configured as 0 Hz fixed frequency - * clocks by default. - * Boards that provide audio clocks should override them. - */ - audio_clk_a: audio_clk_a { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clk_b: audio_clk_b { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clk_c: audio_clk_c { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - /* External USB clock - can be overridden by the board */ - usb_extal_clk: usb_extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a7793", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <13>; + }; - /* External CAN clock */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a7793", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <13>; + }; - /* External SCIF clock */ - scif_clk: scif { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7793", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee100000 0 0x328>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; - /* Special CPG clocks */ - cpg: clock-controller@e6150000 { - compatible = "renesas,r8a7793-cpg-mssr"; - reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>, <&usb_extal_clk>; - clock-names = "extal", "usb_extal"; - #clock-cells = <2>; - #power-domain-cells = <0>; - #reset-cells = <1>; - }; + sdhi1: sd@ee140000 { + compatible = "renesas,sdhi-r8a7793", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; - rst: reset-controller@e6160000 { - compatible = "renesas,r8a7793-rst"; - reg = <0 0xe6160000 0 0x0100>; - }; + sdhi2: sd@ee160000 { + compatible = "renesas,sdhi-r8a7793", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee160000 0 0x100>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; - prr: chipid@ff000044 { - compatible = "renesas,prr"; - reg = <0 0xff000044 0 4>; - }; + mmcif0: mmc@ee200000 { + compatible = "renesas,mmcif-r8a7793", + "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 315>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 315>; + reg-io-width = <4>; + status = "disabled"; + max-frequency = <97500000>; + }; - sysc: system-controller@e6180000 { - compatible = "renesas,r8a7793-sysc"; - reg = <0 0xe6180000 0 0x0200>; - #power-domain-cells = <1>; - }; + ether: ethernet@ee700000 { + compatible = "renesas,ether-r8a7793", + "renesas,rcar-gen2-ether"; + reg = <0 0xee700000 0 0x400>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 813>; + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - ipmmu_sy0: mmu@e6280000 { - compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; - reg = <0 0xe6280000 0 0x1000>; - interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; - }; + gic: interrupt-controller@f1001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x2000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; - ipmmu_sy1: mmu@e6290000 { - compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; - reg = <0 0xe6290000 0 0x1000>; - interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; - }; + du: display@feb00000 { + compatible = "renesas,du-r8a7793"; + reg = <0 0xfeb00000 0 0x40000>, + <0 0xfeb90000 0 0x1c>; + reg-names = "du", "lvds.0"; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 726>; + clock-names = "du.0", "du.1", "lvds.0"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + }; + }; + }; + }; - ipmmu_ds: mmu@e6740000 { - compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; - reg = <0 0xe6740000 0 0x1000>; - interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; - }; + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; - ipmmu_mp: mmu@ec680000 { - compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; - reg = <0 0xec680000 0 0x1000>; - interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; - }; + cmt0: timer@ffca0000 { + compatible = "renesas,r8a7793-cmt0", + "renesas,rcar-gen2-cmt0"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 124>; + + status = "disabled"; + }; - ipmmu_mx: mmu@fe951000 { - compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; - reg = <0 0xfe951000 0 0x1000>; - interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; + cmt1: timer@e6130000 { + compatible = "renesas,r8a7793-cmt1", + "renesas,rcar-gen2-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 329>; + clock-names = "fck"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 329>; + + status = "disabled"; + }; }; - ipmmu_rt: mmu@ffc80000 { - compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; - reg = <0 0xffc80000 0 0x1000>; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; - }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; - ipmmu_gp: mmu@e62a0000 { - compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa"; - reg = <0 0xe62a0000 0 0x1000>; - interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; - }; + thermal-sensors = <&thermal>; - rcar_sound: sound@ec500000 { - /* - * #sound-dai-cells is required - * - * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; - * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; - */ - compatible = "renesas,rcar_sound-r8a7793", "renesas,rcar_sound-gen2"; - reg = <0 0xec500000 0 0x1000>, /* SCU */ - <0 0xec5a0000 0 0x100>, /* ADG */ - <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ - reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; - - clocks = <&cpg CPG_MOD 1005>, - <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, - <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, - <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, - <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, - <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, - <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, - <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, - <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, - <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, - <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, - <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, - <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, - <&cpg CPG_CORE R8A7793_CLK_M2>; - clock-names = "ssi-all", - "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", - "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", - "src.9", "src.8", "src.7", "src.6", "src.5", - "src.4", "src.3", "src.2", "src.1", "src.0", - "dvc.0", "dvc.1", - "clk_a", "clk_b", "clk_c", "clk_i"; - power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; - resets = <&cpg 1005>, - <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>, - <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>, - <&cpg 1014>, <&cpg 1015>; - reset-names = "ssi-all", - "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", - "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0"; - - status = "disabled"; - - rcar_sound,dvc { - dvc0: dvc-0 { - dmas = <&audma1 0xbc>; - dma-names = "tx"; + trips { + cpu-crit { + temperature = <95000>; + hysteresis = <0>; + type = "critical"; + }; }; - dvc1: dvc-1 { - dmas = <&audma1 0xbe>; - dma-names = "tx"; + cooling-maps { }; }; + }; - rcar_sound,src { - src0: src-0 { - interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x85>, <&audma1 0x9a>; - dma-names = "rx", "tx"; - }; - src1: src-1 { - interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x87>, <&audma1 0x9c>; - dma-names = "rx", "tx"; - }; - src2: src-2 { - interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x89>, <&audma1 0x9e>; - dma-names = "rx", "tx"; - }; - src3: src-3 { - interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x8b>, <&audma1 0xa0>; - dma-names = "rx", "tx"; - }; - src4: src-4 { - interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x8d>, <&audma1 0xb0>; - dma-names = "rx", "tx"; - }; - src5: src-5 { - interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x8f>, <&audma1 0xb2>; - dma-names = "rx", "tx"; - }; - src6: src-6 { - interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x91>, <&audma1 0xb4>; - dma-names = "rx", "tx"; - }; - src7: src-7 { - interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x93>, <&audma1 0xb6>; - dma-names = "rx", "tx"; - }; - src8: src-8 { - interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x95>, <&audma1 0xb8>; - dma-names = "rx", "tx"; - }; - src9: src-9 { - interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x97>, <&audma1 0xba>; - dma-names = "rx", "tx"; - }; - }; + timer { + compatible = "arm,armv7-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; - rcar_sound,ssi { - ssi0: ssi-0 { - interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi1: ssi-1 { - interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi2: ssi-2 { - interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi3: ssi-3 { - interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi4: ssi-4 { - interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi5: ssi-5 { - interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi6: ssi-6 { - interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi7: ssi-7 { - interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi8: ssi-8 { - interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi9: ssi-9 { - interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - }; + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; }; }; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index 60c6515c49966..26a883484ea81 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -18,7 +18,9 @@ aliases { serial0 = &scif2; + i2c9 = &gpioi2c1; i2c10 = &gpioi2c4; + i2c11 = &i2chdmi; i2c12 = &i2cexio4; }; @@ -138,17 +140,50 @@ clock-frequency = <148500000>; }; + gpioi2c1: i2c-9 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + status = "disabled"; + scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + }; + gpioi2c4: i2c-10 { #address-cells = <1>; #size-cells = <0>; compatible = "i2c-gpio"; status = "disabled"; - sda-gpios = <&gpio4 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpio4 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio4 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <5>; }; /* + * A fallback to GPIO is provided for I2C1. + */ + i2chdmi: i2c-11 { + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&i2c1>, <&gpioi2c1>; + i2c-bus-name = "i2c-hdmi"; + #address-cells = <1>; + #size-cells = <0>; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin0>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin0ep>; + }; + }; + }; + }; + + /* * I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA). * A fallback to GPIO is provided. */ @@ -324,23 +359,9 @@ &i2c1 { pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; + pinctrl-names = "i2c-hdmi"; - status = "okay"; clock-frequency = <400000>; - - composite-in@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - remote = <&vin0>; - - port { - adv7180: endpoint { - bus-width = <8>; - remote-endpoint = <&vin0ep>; - }; - }; - }; }; &i2c4 { diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index edfad0e5ac53a..351cb3b3d9663 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -24,6 +24,7 @@ /dts-v1/; #include "r8a7794.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "SILK"; @@ -31,6 +32,8 @@ aliases { serial0 = &scif2; + i2c9 = &gpioi2c1; + i2c10 = &i2chdmi; }; chosen { @@ -43,6 +46,60 @@ reg = <0 0x40000000 0 0x40000000>; }; + gpio-keys { + compatible = "gpio-keys"; + + key-3 { + gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW3"; + wakeup-source; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW4"; + wakeup-source; + debounce-interval = <20>; + }; + key-6 { + gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_6>; + label = "SW6"; + wakeup-source; + debounce-interval = <20>; + }; + key-a { + gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; + linux,code = <KEY_A>; + label = "SW12-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-b { + gpios = <&gpio3 10 GPIO_ACTIVE_LOW>; + linux,code = <KEY_B>; + label = "SW12-2"; + wakeup-source; + debounce-interval = <20>; + }; + key-c { + gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_C>; + label = "SW12-3"; + wakeup-source; + debounce-interval = <20>; + }; + key-d { + gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_D>; + label = "SW12-4"; + wakeup-source; + debounce-interval = <20>; + }; + }; + d3_3v: regulator-d3-3v { compatible = "regulator-fixed"; regulator-name = "D3.3V"; @@ -153,6 +210,84 @@ clocks = <&x9_clk>; }; }; + + gpioi2c1: i2c-9 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + status = "disabled"; + scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <5>; + }; + + /* + * A fallback to GPIO is provided for I2C1. + */ + i2chdmi: i2c-10 { + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&i2c1>, <&gpioi2c1>; + i2c-bus-name = "i2c-hdmi"; + #address-cells = <1>; + #size-cells = <0>; + + ak4643: codec@12 { + compatible = "asahi-kasei,ak4643"; + #sound-dai-cells = <0>; + reg = <0x12>; + }; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin0>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin0ep>; + }; + }; + }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio5>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&du_out_rgb0>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + + eeprom@50 { + compatible = "renesas,r1ex24002", "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + }; }; &extal_clk { @@ -268,61 +403,9 @@ &i2c1 { pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; + pinctrl-names = "i2c-hdmi"; - status = "okay"; clock-frequency = <400000>; - - ak4643: codec@12 { - compatible = "asahi-kasei,ak4643"; - #sound-dai-cells = <0>; - reg = <0x12>; - }; - - composite-in@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - remote = <&vin0>; - - port { - adv7180: endpoint { - bus-width = <8>; - remote-endpoint = <&vin0ep>; - }; - }; - }; - - hdmi@39 { - compatible = "adi,adv7511w"; - reg = <0x39>; - interrupt-parent = <&gpio5>; - interrupts = <23 IRQ_TYPE_LEVEL_LOW>; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511_in: endpoint { - remote-endpoint = <&du_out_rgb0>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_con>; - }; - }; - }; - }; }; &mmcif0 { diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 106b4e1649ff6..d588efa6aeaa0 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -16,7 +16,6 @@ / { compatible = "renesas,r8a7794"; - interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; @@ -34,6 +33,35 @@ vin1 = &vin1; }; + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clka: audio_clka { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clkb: audio_clkb { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clkc: audio_clkc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -67,1290 +95,1313 @@ }; }; - apmu@e6151000 { - compatible = "renesas,r8a7794-apmu", "renesas,apmu"; - reg = <0 0xe6151000 0 0x188>; - cpus = <&cpu0 &cpu1>; - }; - - gic: interrupt-controller@f1001000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0 0xf1001000 0 0x1000>, - <0 0xf1002000 0 0x2000>, - <0 0xf1004000 0 0x2000>, - <0 0xf1006000 0 0x2000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; - clocks = <&cpg CPG_MOD 408>; - clock-names = "clk"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 408>; + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; }; - gpio0: gpio@e6050000 { - compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6050000 0 0x50>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 0 32>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 912>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 912>; + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; }; - gpio1: gpio@e6051000 { - compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6051000 0 0x50>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 32 26>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 911>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 911>; - }; + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; - gpio2: gpio@e6052000 { - compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6052000 0 0x50>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 64 32>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 910>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 910>; - }; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7794", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; - gpio3: gpio@e6053000 { - compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6053000 0 0x50>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 96 32>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 909>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 909>; - }; + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7794", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; - gpio4: gpio@e6054000 { - compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6054000 0 0x50>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 128 32>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 908>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 908>; - }; + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7794", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; - gpio5: gpio@e6055000 { - compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6055000 0 0x50>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 160 28>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 907>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 907>; - }; + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7794", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; - gpio6: gpio@e6055400 { - compatible = "renesas,gpio-r8a7794", "renesas,rcar-gen2-gpio"; - reg = <0 0xe6055400 0 0x50>; - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - gpio-ranges = <&pfc 0 192 26>; - #interrupt-cells = <2>; - interrupt-controller; - clocks = <&cpg CPG_MOD 905>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 905>; - }; + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7794", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; - cmt0: timer@ffca0000 { - compatible = "renesas,r8a7794-cmt0", "renesas,rcar-gen2-cmt0"; - reg = <0 0xffca0000 0 0x1004>; - interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 124>; - clock-names = "fck"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 124>; - - status = "disabled"; - }; + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7794", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 28>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; - cmt1: timer@e6130000 { - compatible = "renesas,r8a7794-cmt1", "renesas,rcar-gen2-cmt1"; - reg = <0 0xe6130000 0 0x1004>; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 329>; - clock-names = "fck"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 329>; - - status = "disabled"; - }; + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a7794", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 905>; + }; - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; - }; + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a7794"; + reg = <0 0xe6060000 0 0x11c>; + }; - irqc0: interrupt-controller@e61c0000 { - compatible = "renesas,irqc-r8a7794", "renesas,irqc"; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 407>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 407>; - }; + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7794-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; - pfc: pin-controller@e6060000 { - compatible = "renesas,pfc-r8a7794"; - reg = <0 0xe6060000 0 0x11c>; - }; + apmu@e6151000 { + compatible = "renesas,r8a7794-apmu", "renesas,apmu"; + reg = <0 0xe6151000 0 0x188>; + cpus = <&cpu0 &cpu1>; + }; - dmac0: dma-controller@e6700000 { - compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac"; - reg = <0 0xe6700000 0 0x20000>; - interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12", "ch13", "ch14"; - clocks = <&cpg CPG_MOD 219>; - clock-names = "fck"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 219>; - #dma-cells = <1>; - dma-channels = <15>; - }; + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7794-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; - dmac1: dma-controller@e6720000 { - compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac"; - reg = <0 0xe6720000 0 0x20000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", - "ch4", "ch5", "ch6", "ch7", - "ch8", "ch9", "ch10", "ch11", - "ch12", "ch13", "ch14"; - clocks = <&cpg CPG_MOD 218>; - clock-names = "fck"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 218>; - #dma-cells = <1>; - dma-channels = <15>; - }; + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7794-sysc"; + reg = <0 0xe6180000 0 0x0200>; + #power-domain-cells = <1>; + }; - audma0: dma-controller@ec700000 { - compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac"; - reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "error", - "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", - "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", - "ch12"; - clocks = <&cpg CPG_MOD 502>; - clock-names = "fck"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 502>; - #dma-cells = <1>; - dma-channels = <13>; - }; + irqc0: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7794", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; - scifa0: serial@e6c40000 { - compatible = "renesas,scifa-r8a7794", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c40000 0 64>; - interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 204>; - clock-names = "fck"; - dmas = <&dmac0 0x21>, <&dmac0 0x22>, - <&dmac1 0x21>, <&dmac1 0x22>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 204>; - status = "disabled"; - }; + ipmmu_sy0: mmu@e6280000 { + compatible = "renesas,ipmmu-r8a7794", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6280000 0 0x1000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - scifa1: serial@e6c50000 { - compatible = "renesas,scifa-r8a7794", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c50000 0 64>; - interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 203>; - clock-names = "fck"; - dmas = <&dmac0 0x25>, <&dmac0 0x26>, - <&dmac1 0x25>, <&dmac1 0x26>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 203>; - status = "disabled"; - }; + ipmmu_sy1: mmu@e6290000 { + compatible = "renesas,ipmmu-r8a7794", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6290000 0 0x1000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - scifa2: serial@e6c60000 { - compatible = "renesas,scifa-r8a7794", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c60000 0 64>; - interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 202>; - clock-names = "fck"; - dmas = <&dmac0 0x27>, <&dmac0 0x28>, - <&dmac1 0x27>, <&dmac1 0x28>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 202>; - status = "disabled"; - }; + ipmmu_ds: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a7794", + "renesas,ipmmu-vmsa"; + reg = <0 0xe6740000 0 0x1000>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - scifa3: serial@e6c70000 { - compatible = "renesas,scifa-r8a7794", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c70000 0 64>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 1106>; - clock-names = "fck"; - dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, - <&dmac1 0x1b>, <&dmac1 0x1c>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 1106>; - status = "disabled"; - }; + ipmmu_mp: mmu@ec680000 { + compatible = "renesas,ipmmu-r8a7794", + "renesas,ipmmu-vmsa"; + reg = <0 0xec680000 0 0x1000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - scifa4: serial@e6c78000 { - compatible = "renesas,scifa-r8a7794", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c78000 0 64>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 1107>; - clock-names = "fck"; - dmas = <&dmac0 0x1f>, <&dmac0 0x20>, - <&dmac1 0x1f>, <&dmac1 0x20>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 1107>; - status = "disabled"; - }; + ipmmu_mx: mmu@fe951000 { + compatible = "renesas,ipmmu-r8a7794", + "renesas,ipmmu-vmsa"; + reg = <0 0xfe951000 0 0x1000>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - scifa5: serial@e6c80000 { - compatible = "renesas,scifa-r8a7794", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c80000 0 64>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 1108>; - clock-names = "fck"; - dmas = <&dmac0 0x23>, <&dmac0 0x24>, - <&dmac1 0x23>, <&dmac1 0x24>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 1108>; - status = "disabled"; - }; + ipmmu_gp: mmu@e62a0000 { + compatible = "renesas,ipmmu-r8a7794", + "renesas,ipmmu-vmsa"; + reg = <0 0xe62a0000 0 0x1000>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + status = "disabled"; + }; - scifb0: serial@e6c20000 { - compatible = "renesas,scifb-r8a7794", - "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c20000 0 0x100>; - interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 206>; - clock-names = "fck"; - dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, - <&dmac1 0x3d>, <&dmac1 0x3e>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 206>; - status = "disabled"; - }; + icram0: sram@e63a0000 { + compatible = "mmio-sram"; + reg = <0 0xe63a0000 0 0x12000>; + }; - scifb1: serial@e6c30000 { - compatible = "renesas,scifb-r8a7794", - "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c30000 0 0x100>; - interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 207>; - clock-names = "fck"; - dmas = <&dmac0 0x19>, <&dmac0 0x1a>, - <&dmac1 0x19>, <&dmac1 0x1a>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 207>; - status = "disabled"; - }; + icram1: sram@e63c0000 { + compatible = "mmio-sram"; + reg = <0 0xe63c0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0xe63c0000 0x1000>; - scifb2: serial@e6ce0000 { - compatible = "renesas,scifb-r8a7794", - "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6ce0000 0 0x100>; - interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 216>; - clock-names = "fck"; - dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, - <&dmac1 0x1d>, <&dmac1 0x1e>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 216>; - status = "disabled"; - }; + smp-sram@0 { + compatible = "renesas,smp-sram"; + reg = <0 0x10>; + }; + }; - scif0: serial@e6e60000 { - compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", - "renesas,scif"; - reg = <0 0xe6e60000 0 64>; - interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7794_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x29>, <&dmac0 0x2a>, - <&dmac1 0x29>, <&dmac1 0x2a>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 721>; - status = "disabled"; - }; + /* The memory map in the User's Manual maps the cores to + * bus numbers + */ + i2c0: i2c@e6508000 { + compatible = "renesas,i2c-r8a7794", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 931>; + #address-cells = <1>; + #size-cells = <0>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; - scif1: serial@e6e68000 { - compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", - "renesas,scif"; - reg = <0 0xe6e68000 0 64>; - interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7794_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, - <&dmac1 0x2d>, <&dmac1 0x2e>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 720>; - status = "disabled"; - }; + i2c1: i2c@e6518000 { + compatible = "renesas,i2c-r8a7794", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6518000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 930>; + #address-cells = <1>; + #size-cells = <0>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; - scif2: serial@e6e58000 { - compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", - "renesas,scif"; - reg = <0 0xe6e58000 0 64>; - interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7794_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, - <&dmac1 0x2b>, <&dmac1 0x2c>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 719>; - status = "disabled"; - }; + i2c2: i2c@e6530000 { + compatible = "renesas,i2c-r8a7794", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6530000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 929>; + #address-cells = <1>; + #size-cells = <0>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; - scif3: serial@e6ea8000 { - compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", - "renesas,scif"; - reg = <0 0xe6ea8000 0 64>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7794_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2f>, <&dmac0 0x30>, - <&dmac1 0x2f>, <&dmac1 0x30>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 718>; - status = "disabled"; - }; + i2c3: i2c@e6540000 { + compatible = "renesas,i2c-r8a7794", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6540000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 928>; + #address-cells = <1>; + #size-cells = <0>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; - scif4: serial@e6ee0000 { - compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", - "renesas,scif"; - reg = <0 0xe6ee0000 0 64>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7794_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, - <&dmac1 0xfb>, <&dmac1 0xfc>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 715>; - status = "disabled"; - }; + i2c4: i2c@e6520000 { + compatible = "renesas,i2c-r8a7794", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6520000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 927>; + #address-cells = <1>; + #size-cells = <0>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; - scif5: serial@e6ee8000 { - compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif", - "renesas,scif"; - reg = <0 0xe6ee8000 0 64>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7794_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, - <&dmac1 0xfd>, <&dmac1 0xfe>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 714>; - status = "disabled"; - }; + i2c5: i2c@e6528000 { + compatible = "renesas,i2c-r8a7794", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6528000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 925>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 925>; + #address-cells = <1>; + #size-cells = <0>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; - hscif0: serial@e62c0000 { - compatible = "renesas,hscif-r8a7794", - "renesas,rcar-gen2-hscif", "renesas,hscif"; - reg = <0 0xe62c0000 0 96>; - interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 717>, <&cpg CPG_CORE R8A7794_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x39>, <&dmac0 0x3a>, - <&dmac1 0x39>, <&dmac1 0x3a>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 717>; - status = "disabled"; - }; + i2c6: i2c@e6500000 { + compatible = "renesas,iic-r8a7794", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 318>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - hscif1: serial@e62c8000 { - compatible = "renesas,hscif-r8a7794", - "renesas,rcar-gen2-hscif", "renesas,hscif"; - reg = <0 0xe62c8000 0 96>; - interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 716>, <&cpg CPG_CORE R8A7794_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, - <&dmac1 0x4d>, <&dmac1 0x4e>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 716>; - status = "disabled"; - }; + i2c7: i2c@e6510000 { + compatible = "renesas,iic-r8a7794", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 323>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 323>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - hscif2: serial@e62d0000 { - compatible = "renesas,hscif-r8a7794", - "renesas,rcar-gen2-hscif", "renesas,hscif"; - reg = <0 0xe62d0000 0 96>; - interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7794_CLK_ZS>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, - <&dmac1 0x3b>, <&dmac1 0x3c>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 713>; - status = "disabled"; - }; + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7794", + "renesas,rcar-gen2-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 704>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + status = "disabled"; + }; - icram0: sram@e63a0000 { - compatible = "mmio-sram"; - reg = <0 0xe63a0000 0 0x12000>; - }; + usbphy: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7794", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 704>; + clock-names = "usbhs"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; - icram1: sram@e63c0000 { - compatible = "mmio-sram"; - reg = <0 0xe63c0000 0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0xe63c0000 0x1000>; + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; - smp-sram@0 { - compatible = "renesas,smp-sram"; - reg = <0 0x10>; + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a7794", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <15>; }; - }; - ether: ethernet@ee700000 { - compatible = "renesas,ether-r8a7794", - "renesas,rcar-gen2-ether"; - reg = <0 0xee700000 0 0x400>; - interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 813>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 813>; - phy-mode = "rmii"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + dmac1: dma-controller@e6720000 { + compatible = "renesas,dmac-r8a7794", + "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <15>; + }; - avb: ethernet@e6800000 { - compatible = "renesas,etheravb-r8a7794", - "renesas,etheravb-rcar-gen2"; - reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; - interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 812>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 812>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7794", + "renesas,etheravb-rcar-gen2"; + reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 812>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - /* The memory map in the User's Manual maps the cores to bus numbers */ - i2c0: i2c@e6508000 { - compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6508000 0 0x40>; - interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 931>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 931>; - #address-cells = <1>; - #size-cells = <0>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7794", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 917>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - i2c1: i2c@e6518000 { - compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6518000 0 0x40>; - interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 930>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 930>; - #address-cells = <1>; - #size-cells = <0>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c40000 0 64>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>; + clock-names = "fck"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; - i2c2: i2c@e6530000 { - compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6530000 0 0x40>; - interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 929>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 929>; - #address-cells = <1>; - #size-cells = <0>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c50000 0 64>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>; + clock-names = "fck"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; - i2c3: i2c@e6540000 { - compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6540000 0 0x40>; - interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 928>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 928>; - #address-cells = <1>; - #size-cells = <0>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; + scifa2: serial@e6c60000 { + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c60000 0 64>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>; + clock-names = "fck"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; - i2c4: i2c@e6520000 { - compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6520000 0 0x40>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 927>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 927>; - #address-cells = <1>; - #size-cells = <0>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; + scifa3: serial@e6c70000 { + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c70000 0 64>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1106>; + clock-names = "fck"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, + <&dmac1 0x1b>, <&dmac1 0x1c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 1106>; + status = "disabled"; + }; - i2c5: i2c@e6528000 { - compatible = "renesas,i2c-r8a7794", "renesas,rcar-gen2-i2c"; - reg = <0 0xe6528000 0 0x40>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 925>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 925>; - #address-cells = <1>; - #size-cells = <0>; - i2c-scl-internal-delay-ns = <6>; - status = "disabled"; - }; + scifa4: serial@e6c78000 { + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c78000 0 64>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1107>; + clock-names = "fck"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>, + <&dmac1 0x1f>, <&dmac1 0x20>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 1107>; + status = "disabled"; + }; - i2c6: i2c@e6500000 { - compatible = "renesas,iic-r8a7794", "renesas,rcar-gen2-iic", - "renesas,rmobile-iic"; - reg = <0 0xe6500000 0 0x425>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 318>; - dmas = <&dmac0 0x61>, <&dmac0 0x62>, - <&dmac1 0x61>, <&dmac1 0x62>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 318>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + scifa5: serial@e6c80000 { + compatible = "renesas,scifa-r8a7794", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c80000 0 64>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1108>; + clock-names = "fck"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>, + <&dmac1 0x23>, <&dmac1 0x24>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 1108>; + status = "disabled"; + }; - i2c7: i2c@e6510000 { - compatible = "renesas,iic-r8a7794", "renesas,rcar-gen2-iic", - "renesas,rmobile-iic"; - reg = <0 0xe6510000 0 0x425>; - interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 323>; - dmas = <&dmac0 0x65>, <&dmac0 0x66>, - <&dmac1 0x65>, <&dmac1 0x66>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 323>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + scifb0: serial@e6c20000 { + compatible = "renesas,scifb-r8a7794", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c20000 0 0x100>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>; + clock-names = "fck"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; - mmcif0: mmc@ee200000 { - compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif"; - reg = <0 0xee200000 0 0x80>; - interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 315>; - dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, - <&dmac1 0xd1>, <&dmac1 0xd2>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 315>; - reg-io-width = <4>; - status = "disabled"; - }; + scifb1: serial@e6c30000 { + compatible = "renesas,scifb-r8a7794", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c30000 0 0x100>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>; + clock-names = "fck"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; - sdhi0: sd@ee100000 { - compatible = "renesas,sdhi-r8a7794", - "renesas,rcar-gen2-sdhi"; - reg = <0 0xee100000 0 0x328>; - interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 314>; - dmas = <&dmac0 0xcd>, <&dmac0 0xce>, - <&dmac1 0xcd>, <&dmac1 0xce>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <195000000>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 314>; - status = "disabled"; - }; + scifb2: serial@e6ce0000 { + compatible = "renesas,scifb-r8a7794", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6ce0000 0 0x100>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 216>; + clock-names = "fck"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 216>; + status = "disabled"; + }; - sdhi1: sd@ee140000 { - compatible = "renesas,sdhi-r8a7794", - "renesas,rcar-gen2-sdhi"; - reg = <0 0xee140000 0 0x100>; - interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 312>; - dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, - <&dmac1 0xc1>, <&dmac1 0xc2>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <97500000>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 312>; - status = "disabled"; - }; + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7794", + "renesas,rcar-gen2-scif", + "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7794_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 721>; + status = "disabled"; + }; - sdhi2: sd@ee160000 { - compatible = "renesas,sdhi-r8a7794", - "renesas,rcar-gen2-sdhi"; - reg = <0 0xee160000 0 0x100>; - interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 311>; - dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, - <&dmac1 0xd3>, <&dmac1 0xd4>; - dma-names = "tx", "rx", "tx", "rx"; - max-frequency = <97500000>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 311>; - status = "disabled"; - }; + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7794", + "renesas,rcar-gen2-scif", + "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 720>, <&cpg CPG_CORE R8A7794_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 720>; + status = "disabled"; + }; - qspi: spi@e6b10000 { - compatible = "renesas,qspi-r8a7794", "renesas,qspi"; - reg = <0 0xe6b10000 0 0x2c>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 917>; - dmas = <&dmac0 0x17>, <&dmac0 0x18>, - <&dmac1 0x17>, <&dmac1 0x18>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 917>; - num-cs = <1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + scif2: serial@e6e58000 { + compatible = "renesas,scif-r8a7794", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e58000 0 64>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 719>, <&cpg CPG_CORE R8A7794_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 719>; + status = "disabled"; + }; - vin0: video@e6ef0000 { - compatible = "renesas,vin-r8a7794", "renesas,rcar-gen2-vin"; - reg = <0 0xe6ef0000 0 0x1000>; - interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 811>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 811>; - status = "disabled"; - }; + scif3: serial@e6ea8000 { + compatible = "renesas,scif-r8a7794", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ea8000 0 64>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 718>, <&cpg CPG_CORE R8A7794_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>, + <&dmac1 0x2f>, <&dmac1 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 718>; + status = "disabled"; + }; - vin1: video@e6ef1000 { - compatible = "renesas,vin-r8a7794", "renesas,rcar-gen2-vin"; - reg = <0 0xe6ef1000 0 0x1000>; - interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 810>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 810>; - status = "disabled"; - }; + scif4: serial@e6ee0000 { + compatible = "renesas,scif-r8a7794", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee0000 0 64>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 715>, <&cpg CPG_CORE R8A7794_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, + <&dmac1 0xfb>, <&dmac1 0xfc>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 715>; + status = "disabled"; + }; - pci0: pci@ee090000 { - compatible = "renesas,pci-r8a7794", "renesas,pci-rcar-gen2"; - device_type = "pci"; - reg = <0 0xee090000 0 0xc00>, - <0 0xee080000 0 0x1100>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 703>; - status = "disabled"; - - bus-range = <0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - - usb@1,0 { - reg = <0x800 0 0 0 0>; - phys = <&usb0 0>; - phy-names = "usb"; + scif5: serial@e6ee8000 { + compatible = "renesas,scif-r8a7794", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee8000 0 64>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 714>, <&cpg CPG_CORE R8A7794_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, + <&dmac1 0xfd>, <&dmac1 0xfe>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 714>; + status = "disabled"; }; - usb@2,0 { - reg = <0x1000 0 0 0 0>; - phys = <&usb0 0>; - phy-names = "usb"; + hscif0: serial@e62c0000 { + compatible = "renesas,hscif-r8a7794", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c0000 0 96>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 717>, + <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 717>; + status = "disabled"; }; - }; - pci1: pci@ee0d0000 { - compatible = "renesas,pci-r8a7794", "renesas,pci-rcar-gen2"; - device_type = "pci"; - reg = <0 0xee0d0000 0 0xc00>, - <0 0xee0c0000 0 0x1100>; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 703>; - status = "disabled"; - - bus-range = <1 1>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - - usb@1,0 { - reg = <0x10800 0 0 0 0>; - phys = <&usb2 0>; - phy-names = "usb"; + hscif1: serial@e62c8000 { + compatible = "renesas,hscif-r8a7794", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c8000 0 96>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>, + <&cpg CPG_CORE R8A7794_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; }; - usb@2,0 { - reg = <0x11000 0 0 0 0>; - phys = <&usb2 0>; - phy-names = "usb"; + hscif2: serial@e62d0000 { + compatible = "renesas,hscif-r8a7794", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62d0000 0 96>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 713>, <&cpg CPG_CORE R8A7794_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, + <&dmac1 0x3b>, <&dmac1 0x3c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 713>; + status = "disabled"; }; - }; - hsusb: usb@e6590000 { - compatible = "renesas,usbhs-r8a7794", "renesas,rcar-gen2-usbhs"; - reg = <0 0xe6590000 0 0x100>; - interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 704>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 704>; - renesas,buswait = <4>; - phys = <&usb0 1>; - phy-names = "usb"; - status = "disabled"; - }; + can0: can@e6e80000 { + compatible = "renesas,can-r8a7794", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e80000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7794_CLK_RCAN>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; - usbphy: usb-phy@e6590100 { - compatible = "renesas,usb-phy-r8a7794", - "renesas,rcar-gen2-usb-phy"; - reg = <0 0xe6590100 0 0x100>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&cpg CPG_MOD 704>; - clock-names = "usbhs"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 704>; - status = "disabled"; + can1: can@e6e88000 { + compatible = "renesas,can-r8a7794", + "renesas,rcar-gen2-can"; + reg = <0 0xe6e88000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7794_CLK_RCAN>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; - usb0: usb-channel@0 { - reg = <0>; - #phy-cells = <1>; + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7794", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 811>; + status = "disabled"; }; - usb2: usb-channel@2 { - reg = <2>; - #phy-cells = <1>; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7794", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 810>; + status = "disabled"; }; - }; - vsp@fe928000 { - compatible = "renesas,vsp1"; - reg = <0 0xfe928000 0 0x8000>; - interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 131>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 131>; - }; + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a7794", + "renesas,rcar_sound-gen2"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri */ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>, + <&cpg CPG_MOD 1027>, <&cpg CPG_MOD 1028>, + <&cpg CPG_MOD 1029>, <&cpg CPG_MOD 1030>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clka>, <&audio_clkb>, <&audio_clkc>, + <&cpg CPG_CORE R8A7794_CLK_M2>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.6", "src.5", "src.4", "src.3", + "src.2", "src.1", + "ctu.0", "ctu.1", + "mix.0", "mix.1", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma0 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma0 0xbe>; + dma-names = "tx"; + }; + }; - vsp@fe930000 { - compatible = "renesas,vsp1"; - reg = <0 0xfe930000 0 0x8000>; - interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 128>; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 128>; - }; + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; - du: display@feb00000 { - compatible = "renesas,du-r8a7794"; - reg = <0 0xfeb00000 0 0x40000>; - reg-names = "du"; - interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; - clock-names = "du.0", "du.1"; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; - port@0 { - reg = <0>; - du_out_rgb0: endpoint { + rcar_sound,src { + src-0 { + status = "disabled"; + }; + src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma0 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma0 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma0 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma0 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma0 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma0 0xb4>; + dma-names = "rx", "tx"; }; }; - port@1 { - reg = <1>; - du_out_rgb1: endpoint { + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma0 0x02>, + <&audma0 0x15>, <&audma0 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma0 0x04>, + <&audma0 0x49>, <&audma0 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma0 0x06>, + <&audma0 0x63>, <&audma0 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma0 0x08>, + <&audma0 0x6f>, <&audma0 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma0 0x0a>, + <&audma0 0x71>, <&audma0 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma0 0x0c>, + <&audma0 0x73>, <&audma0 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma0 0x0e>, + <&audma0 0x75>, <&audma0 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma0 0x10>, + <&audma0 0x79>, <&audma0 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma0 0x12>, + <&audma0 0x7b>, <&audma0 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma0 0x14>, + <&audma0 0x7d>, <&audma0 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; }; }; }; - }; - - can0: can@e6e80000 { - compatible = "renesas,can-r8a7794", "renesas,rcar-gen2-can"; - reg = <0 0xe6e80000 0 0x1000>; - interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 916>, <&cpg CPG_CORE R8A7794_CLK_RCAN>, - <&can_clk>; - clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 916>; - status = "disabled"; - }; - can1: can@e6e88000 { - compatible = "renesas,can-r8a7794", "renesas,rcar-gen2-can"; - reg = <0 0xe6e88000 0 0x1000>; - interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 915>, <&cpg CPG_CORE R8A7794_CLK_RCAN>, - <&can_clk>; - clock-names = "clkp1", "clkp2", "can_clk"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 915>; - status = "disabled"; - }; - - /* External root clock */ - extal_clk: extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; - - /* External USB clock - can be overridden by the board */ - usb_extal_clk: usb_extal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <48000000>; - }; - - /* External CAN clock */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a7794", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", "ch4", + "ch5", "ch6", "ch7", "ch8", "ch9", + "ch10", "ch11", + "ch12"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <13>; + }; - /* External SCIF clock */ - scif_clk: scif { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7794", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; - /* - * The external audio clocks are configured as 0 Hz fixed - * frequency clocks by default. Boards that provide audio - * clocks should override them. - */ - audio_clka: audio_clka { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clkb: audio_clkb { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - audio_clkc: audio_clkc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + }; - cpg: clock-controller@e6150000 { - compatible = "renesas,r8a7794-cpg-mssr"; - reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>, <&usb_extal_clk>; - clock-names = "extal", "usb_extal"; - #clock-cells = <2>; - #power-domain-cells = <0>; - #reset-cells = <1>; - }; + pci1: pci@ee0d0000 { + compatible = "renesas,pci-r8a7794", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x10800 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; - rst: reset-controller@e6160000 { - compatible = "renesas,r8a7794-rst"; - reg = <0 0xe6160000 0 0x0100>; - }; + usb@2,0 { + reg = <0x11000 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + }; - prr: chipid@ff000044 { - compatible = "renesas,prr"; - reg = <0 0xff000044 0 4>; - }; + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7794", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee100000 0 0x328>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; - sysc: system-controller@e6180000 { - compatible = "renesas,r8a7794-sysc"; - reg = <0 0xe6180000 0 0x0200>; - #power-domain-cells = <1>; - }; + sdhi1: sd@ee140000 { + compatible = "renesas,sdhi-r8a7794", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; - ipmmu_sy0: mmu@e6280000 { - compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; - reg = <0 0xe6280000 0 0x1000>; - interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; - }; + sdhi2: sd@ee160000 { + compatible = "renesas,sdhi-r8a7794", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee160000 0 0x100>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; - ipmmu_sy1: mmu@e6290000 { - compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; - reg = <0 0xe6290000 0 0x1000>; - interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; - }; + mmcif0: mmc@ee200000 { + compatible = "renesas,mmcif-r8a7794", + "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 315>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 315>; + reg-io-width = <4>; + status = "disabled"; + }; - ipmmu_ds: mmu@e6740000 { - compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; - reg = <0 0xe6740000 0 0x1000>; - interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; - }; + ether: ethernet@ee700000 { + compatible = "renesas,ether-r8a7794", + "renesas,rcar-gen2-ether"; + reg = <0 0xee700000 0 0x400>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 813>; + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - ipmmu_mp: mmu@ec680000 { - compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; - reg = <0 0xec680000 0 0x1000>; - interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; - }; + gic: interrupt-controller@f1001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x2000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; - ipmmu_mx: mmu@fe951000 { - compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; - reg = <0 0xfe951000 0 0x1000>; - interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; - }; + vsp@fe928000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe928000 0 0x8000>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 131>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 131>; + }; - ipmmu_gp: mmu@e62a0000 { - compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa"; - reg = <0 0xe62a0000 0 0x1000>; - interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; - #iommu-cells = <1>; - status = "disabled"; - }; + vsp@fe930000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe930000 0 0x8000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 128>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 128>; + }; - rcar_sound: sound@ec500000 { - /* - * #sound-dai-cells is required - * - * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; - * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; - */ - compatible = "renesas,rcar_sound-r8a7794", - "renesas,rcar_sound-gen2"; - reg = <0 0xec500000 0 0x1000>, /* SCU */ - <0 0xec5a0000 0 0x100>, /* ADG */ - <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri */ - reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; - - clocks = <&cpg CPG_MOD 1005>, - <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, - <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, - <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, - <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, - <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, - <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>, - <&cpg CPG_MOD 1027>, <&cpg CPG_MOD 1028>, - <&cpg CPG_MOD 1029>, <&cpg CPG_MOD 1030>, - <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, - <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, - <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, - <&audio_clka>, <&audio_clkb>, <&audio_clkc>, - <&cpg CPG_CORE R8A7794_CLK_M2>; - clock-names = "ssi-all", - "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", - "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", - "src.6", "src.5", "src.4", "src.3", "src.2", - "src.1", - "ctu.0", "ctu.1", - "mix.0", "mix.1", - "dvc.0", "dvc.1", - "clk_a", "clk_b", "clk_c", "clk_i"; - power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; - resets = <&cpg 1005>, - <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>, - <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>, - <&cpg 1014>, <&cpg 1015>; - reset-names = "ssi-all", - "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", - "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0"; - - status = "disabled"; - - rcar_sound,dvc { - dvc0: dvc-0 { - dmas = <&audma0 0xbc>; - dma-names = "tx"; - }; - dvc1: dvc-1 { - dmas = <&audma0 0xbe>; - dma-names = "tx"; + du: display@feb00000 { + compatible = "renesas,du-r8a7794"; + reg = <0 0xfeb00000 0 0x40000>; + reg-names = "du"; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb0: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_rgb1: endpoint { + }; + }; }; }; - rcar_sound,mix { - mix0: mix-0 { }; - mix1: mix-1 { }; + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; }; - rcar_sound,ctu { - ctu00: ctu-0 { }; - ctu01: ctu-1 { }; - ctu02: ctu-2 { }; - ctu03: ctu-3 { }; - ctu10: ctu-4 { }; - ctu11: ctu-5 { }; - ctu12: ctu-6 { }; - ctu13: ctu-7 { }; + cmt0: timer@ffca0000 { + compatible = "renesas,r8a7794-cmt0", + "renesas,rcar-gen2-cmt0"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 124>; + + status = "disabled"; }; - rcar_sound,src { - src-0 { - status = "disabled"; - }; - src1: src-1 { - interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x87>, <&audma0 0x9c>; - dma-names = "rx", "tx"; - }; - src2: src-2 { - interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x89>, <&audma0 0x9e>; - dma-names = "rx", "tx"; - }; - src3: src-3 { - interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x8b>, <&audma0 0xa0>; - dma-names = "rx", "tx"; - }; - src4: src-4 { - interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x8d>, <&audma0 0xb0>; - dma-names = "rx", "tx"; - }; - src5: src-5 { - interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x8f>, <&audma0 0xb2>; - dma-names = "rx", "tx"; - }; - src6: src-6 { - interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x91>, <&audma0 0xb4>; - dma-names = "rx", "tx"; - }; + cmt1: timer@e6130000 { + compatible = "renesas,r8a7794-cmt1", + "renesas,rcar-gen2-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 329>; + clock-names = "fck"; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; + resets = <&cpg 329>; + + status = "disabled"; }; + }; - rcar_sound,ssi { - ssi0: ssi-0 { - interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x01>, <&audma0 0x02>, - <&audma0 0x15>, <&audma0 0x16>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi1: ssi-1 { - interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x03>, <&audma0 0x04>, - <&audma0 0x49>, <&audma0 0x4a>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi2: ssi-2 { - interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x05>, <&audma0 0x06>, - <&audma0 0x63>, <&audma0 0x64>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi3: ssi-3 { - interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x07>, <&audma0 0x08>, - <&audma0 0x6f>, <&audma0 0x70>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi4: ssi-4 { - interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x09>, <&audma0 0x0a>, - <&audma0 0x71>, <&audma0 0x72>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi5: ssi-5 { - interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0b>, <&audma0 0x0c>, - <&audma0 0x73>, <&audma0 0x74>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi6: ssi-6 { - interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0d>, <&audma0 0x0e>, - <&audma0 0x75>, <&audma0 0x76>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi7: ssi-7 { - interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0f>, <&audma0 0x10>, - <&audma0 0x79>, <&audma0 0x7a>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi8: ssi-8 { - interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x11>, <&audma0 0x12>, - <&audma0 0x7b>, <&audma0 0x7c>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - ssi9: ssi-9 { - interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x13>, <&audma0 0x14>, - <&audma0 0x7d>, <&audma0 0x7e>; - dma-names = "rx", "tx", "rxu", "txu"; - }; - }; + timer { + compatible = "arm,armv7-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; }; }; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 341deaf62ff62..df1e478586753 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -233,7 +233,7 @@ }; grf: syscon@11000000 { - compatible = "syscon", "simple-mfd"; + compatible = "rockchip,rk3228-grf", "syscon", "simple-mfd"; reg = <0x11000000 0x1000>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rk3288-phycore-rdk.dts index 1241cbcfc16fa..985743fa134cd 100644 --- a/arch/arm/boot/dts/rk3288-phycore-rdk.dts +++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts @@ -265,7 +265,11 @@ disable-wp; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; - vmmc-supply = <&vdd_io_sd>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&vdd_sd>; vqmmc-supply = <&vdd_io_sd>; status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi index 5eae4776ffdee..f13bcb1cd3d98 100644 --- a/arch/arm/boot/dts/rk3288-phycore-som.dtsi +++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi @@ -336,11 +336,10 @@ regulator-name = "vdd_io_sd"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; + regulator-off-in-suspend; }; }; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index b9c471fcbd42b..51f36a1b698ef 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -280,6 +280,10 @@ }; }; +&saradc { + vref-supply = <&vcc_18>; +}; + &tsadc { rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index 0e084b8a86acb..8ccc89dbdfaf0 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -39,6 +39,7 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> #include "rk3288-rock2-som.dtsi" / { @@ -49,6 +50,32 @@ stdout-path = "serial2:115200n8"; }; + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + button-recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <0>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <KEY_POWER>; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + wakeup-source; + }; + }; + gpio-leds { compatible = "gpio-leds"; @@ -220,6 +247,12 @@ }; }; + keys { + pwr_key: pwr-key { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + pmic { pmic_int: pmic-int { rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>; @@ -261,6 +294,10 @@ }; }; +&saradc { + status = "okay"; +}; + &spdif { status = "okay"; }; @@ -284,3 +321,7 @@ &usb_host1 { status = "okay"; }; + +&usb_otg { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index d752a315f8841..be487111d0252 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -92,7 +92,6 @@ 248 249 250 251 252 253 254 255>; default-brightness-level = <128>; enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; - backlight-boot-off; pinctrl-names = "default"; pinctrl-0 = <&bl_en>; pwms = <&pwm0 0 1000000 0>; diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts index 9842a006e8238..14c896bfc6397 100644 --- a/arch/arm/boot/dts/rk3288-vyasa.dts +++ b/arch/arm/boot/dts/rk3288-vyasa.dts @@ -155,6 +155,17 @@ cpu0-supply = <&vdd_cpu>; }; +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; + vmmc-supply = <&vcc_io>; + status = "okay"; +}; + &gmac { assigned-clocks = <&cru SCLK_MAC>; assigned-clock-parents = <&ext_gmac>; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index b9c05b57735e8..eae5e1ee9cd82 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -861,24 +861,24 @@ uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* conflicts with PWMFI2, ISI_D8 */ - AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* conflicts with ISI_PCK */ + <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* conflicts with PWMFI2, ISI_D8 */ + AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* conflicts with ISI_PCK */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* conflicts with TWD0, ISI_VSYNC */ - AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* conflicts with TWCK0, ISI_HSYNC */ + <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* conflicts with TWD0, ISI_VSYNC */ + AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with TWCK0, ISI_HSYNC */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD17 periph A */ - AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD18 periph A with pullup */ + <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; pinctrl_usart0_rts_cts: usart0_rts_cts-0 { @@ -891,8 +891,8 @@ usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB28 periph A */ - AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB29 periph A with pullup */ + <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; pinctrl_usart1_rts_cts: usart1_rts_cts-0 { @@ -905,8 +905,8 @@ usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE25 periph B, conflicts with A25 */ - AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PE26 periph B with pullup, conflicts NCS0 */ + <AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* conflicts with A25 */ + AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts NCS0 */ }; pinctrl_usart2_rts_cts: usart2_rts_cts-0 { @@ -919,8 +919,8 @@ usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* PE18 periph B, conflicts with A18 */ - AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PE19 periph B with pullup, conflicts with A19 */ + <AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* conflicts with A18 */ + AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with A19 */ }; pinctrl_usart3_rts_cts: usart3_rts_cts-0 { diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts index c8b8449fdc3ec..15d5c46013a42 100644 --- a/arch/arm/boot/dts/sama5d34ek.dts +++ b/arch/arm/boot/dts/sama5d34ek.dts @@ -38,7 +38,7 @@ status = "okay"; 24c256@50 { - compatible = "24c256"; + compatible = "atmel,24c256"; reg = <0x50>; pagesize = <64>; }; diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi index 186377d41c917..f599f8a5f664f 100644 --- a/arch/arm/boot/dts/sama5d3_uart.dtsi +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -23,16 +23,16 @@ uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */ - AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC30 periph A with pullup, conflicts with ISI_PCK */ + <AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* conflicts with PWMFI2, ISI_D8 */ + AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* conflicts with ISI_PCK */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */ - AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */ + <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* conflicts with TWD0, ISI_VSYNC */ + AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with TWCK0, ISI_HSYNC */ }; }; }; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 373b3621b5365..0cf9beddd5560 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -1379,7 +1379,7 @@ pinctrl@fc06a000 { #address-cells = <1>; #size-cells = <1>; - compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus"; ranges = <0xfc068000 0xfc068000 0x100 0xfc06a000 0xfc06a000 0x4000>; /* WARNING: revisit as pin spec has changed */ @@ -1926,8 +1926,8 @@ uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <AT91_PIOE 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD */ - AT91_PIOE 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD */ + <AT91_PIOE 29 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* RXD */ + AT91_PIOE 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* TXD */ >; }; }; @@ -1935,8 +1935,8 @@ uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <AT91_PIOC 25 AT91_PERIPH_C AT91_PINCTRL_NONE /* RXD */ - AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* TXD */ + <AT91_PIOC 25 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* RXD */ + AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE /* TXD */ >; }; }; @@ -1944,8 +1944,8 @@ usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* RXD */ - AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* TXD */ + <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* RXD */ + AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* TXD */ >; }; pinctrl_usart0_rts: usart0_rts-0 { @@ -1959,8 +1959,8 @@ usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* RXD */ - AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* TXD */ + <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* RXD */ + AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* TXD */ >; }; pinctrl_usart1_rts: usart1_rts-0 { @@ -1974,8 +1974,8 @@ usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD - conflicts with G0_CRS, ISI_HSYNC */ - AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD - conflicts with G0_COL, PCK2 */ + <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* RXD - conflicts with G0_CRS, ISI_HSYNC */ + AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE /* TXD - conflicts with G0_COL, PCK2 */ >; }; pinctrl_usart2_rts: usart2_rts-0 { @@ -1989,8 +1989,8 @@ usart3 { pinctrl_usart3: usart3-0 { atmel,pins = - <AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD */ - AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD */ + <AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* RXD */ + AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE /* TXD */ >; }; }; @@ -1998,8 +1998,8 @@ usart4 { pinctrl_usart4: usart4-0 { atmel,pins = - <AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD */ - AT91_PIOE 27 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD */ + <AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* RXD */ + AT91_PIOE 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* TXD */ >; }; pinctrl_usart4_rts: usart4_rts-0 { diff --git a/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi b/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi deleted file mode 100644 index dbdda36179ee9..0000000000000 --- a/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi +++ /dev/null @@ -1,68 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Timings and Geometry for Samsung K3PE0E000B memory part - */ - -/ { - samsung_K3PE0E000B: lpddr2 { - compatible = "Samsung,K3PE0E000B","jedec,lpddr2-s4"; - density = <4096>; - io-width = <32>; - - tRPab-min-tck = <3>; - tRCD-min-tck = <3>; - tWR-min-tck = <3>; - tRASmin-min-tck = <3>; - tRRD-min-tck = <2>; - tWTR-min-tck = <2>; - tXP-min-tck = <2>; - tRTP-min-tck = <2>; - tCKE-min-tck = <3>; - tCKESR-min-tck = <3>; - tFAW-min-tck = <8>; - - timings_samsung_K3PE0E000B_533MHz: lpddr2-timings@0 { - compatible = "jedec,lpddr2-timings"; - min-freq = <10000000>; - max-freq = <533333333>; - tRPab = <21000>; - tRCD = <18000>; - tWR = <15000>; - tRAS-min = <42000>; - tRRD = <10000>; - tWTR = <7500>; - tXP = <7500>; - tRTP = <7500>; - tCKESR = <15000>; - tDQSCK-max = <5500>; - tFAW = <50000>; - tZQCS = <90000>; - tZQCL = <360000>; - tZQinit = <1000000>; - tRAS-max-ns = <70000>; - tDQSCK-max-derated = <6000>; - }; - - timings_samsung_K3PE0E000B_266MHz: lpddr2-timings@1 { - compatible = "jedec,lpddr2-timings"; - min-freq = <10000000>; - max-freq = <266666666>; - tRPab = <21000>; - tRCD = <18000>; - tWR = <15000>; - tRAS-min = <42000>; - tRRD = <10000>; - tWTR = <7500>; - tXP = <7500>; - tRTP = <7500>; - tCKESR = <15000>; - tDQSCK-max = <5500>; - tFAW = <50000>; - tZQCS = <90000>; - tZQCL = <360000>; - tZQinit = <1000000>; - tRAS-max-ns = <70000>; - tDQSCK-max-derated = <6000>; - }; - }; -}; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index c42ca7022e8c2..486d4e7433ed3 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -831,7 +831,7 @@ timer@fffec600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xfffec600 0x100>; - interrupts = <1 13 0xf04>; + interrupts = <1 13 0xf01>; clocks = <&mpu_periph_clk>; }; diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts index a7a0f76e9cbc7..62ce1cecbb1f6 100644 --- a/arch/arm/boot/dts/stih407-b2120.dts +++ b/arch/arm/boot/dts/stih407-b2120.dts @@ -15,10 +15,10 @@ chosen { bootargs = "clk_ignore_unused"; - linux,stdout-path = &sbc_serial0; + stdout-path = &sbc_serial0; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x80000000>; }; diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi index d0a24d9e517a5..ea78334898328 100644 --- a/arch/arm/boot/dts/stih407-clock.dtsi +++ b/arch/arm/boot/dts/stih407-clock.dtsi @@ -7,33 +7,27 @@ */ #include <dt-bindings/clock/stih407-clks.h> / { + /* + * Fixed 30MHz oscillator inputs to SoC + */ + clk_sysin: clk-sysin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <30000000>; + }; + + clk_tmdsout_hdmi: clk-tmdsout-hdmi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; ranges; /* - * Fixed 30MHz oscillator inputs to SoC - */ - clk_sysin: clk-sysin { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <30000000>; - }; - - /* - * ARM Peripheral clock for timers - */ - arm_periph_clk: clk-m-a9-periphs { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - - clocks = <&clk_m_a9>; - clock-div = <2>; - clock-mult = <1>; - }; - - /* * A9 PLL. */ clockgen-a9@92b0000 { @@ -62,32 +56,19 @@ <&clockgen_a9_pll 0>, <&clk_s_c0_flexgen 13>, <&clk_m_a9_ext2f_div2>; - }; - /* - * ARM Peripheral clock for timers - */ - clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - - clocks = <&clk_s_c0_flexgen 13>; - - clock-output-names = "clk-m-a9-ext2f-div2"; - clock-div = <2>; - clock-mult = <1>; - }; + /* + * ARM Peripheral clock for timers + */ + arm_periph_clk: clk-m-a9-periphs { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; - /* - * Bootloader initialized system infrastructure clock for - * serial devices. - */ - clk_ext2f_a9: clockgen-c0@13 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <200000000>; - clock-output-names = "clk-s-icn-reg-0"; + clocks = <&clk_m_a9>; + clock-div = <2>; + clock-mult = <1>; + }; }; clockgen-a@90ff000 { @@ -204,6 +185,21 @@ <CLK_EXT2F_A9>, <CLK_ICN_LMI>, <CLK_ICN_SBC>; + + /* + * ARM Peripheral clock for timers + */ + clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + + clocks = <&clk_s_c0_flexgen 13>; + + clock-output-names = "clk-m-a9-ext2f-div2"; + + clock-div = <2>; + clock-mult = <1>; + }; }; }; @@ -254,13 +250,7 @@ "clk-s-d2-fs0-ch3"; }; - clk_tmdsout_hdmi: clk-tmdsout-hdmi { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - clockgen-d2@x9106000 { + clockgen-d2@9106000 { compatible = "st,clkgen-c32"; reg = <0x9106000 0x1000>; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index cf3756976c396..f7362c31de29a 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -92,7 +92,7 @@ clocks = <&arm_periph_clk>; }; - l2: cache-controller { + l2: cache-controller@8762000 { compatible = "arm,pl310-cache"; reg = <0x08762000 0x1000>; arm,data-latency = <3 3 3>; @@ -125,24 +125,28 @@ ranges; compatible = "simple-bus"; - restart { + restart: restart-controller@0 { compatible = "st,stih407-restart"; + reg = <0 0>; st,syscfg = <&syscfg_sbc_reg>; status = "okay"; }; - powerdown: powerdown-controller { + powerdown: powerdown-controller@0 { compatible = "st,stih407-powerdown"; + reg = <0 0>; #reset-cells = <1>; }; - softreset: softreset-controller { + softreset: softreset-controller@0 { compatible = "st,stih407-softreset"; + reg = <0 0>; #reset-cells = <1>; }; - picophyreset: picophyreset-controller { + picophyreset: picophyreset-controller@0 { compatible = "st,stih407-picophyreset"; + reg = <0 0>; #reset-cells = <1>; }; @@ -174,6 +178,13 @@ syscfg_core: core-syscfg@92b0000 { compatible = "st,stih407-core-syscfg", "syscon"; reg = <0x92b0000 0x1000>; + + sti_sasg_codec: sti-sasg-codec { + compatible = "st,stih407-sas-codec"; + #sound-dai-cells = <1>; + status = "disabled"; + st,syscfg = <&syscfg_core>; + }; }; syscfg_lpm: lpm-syscfg@94b5100 { @@ -181,8 +192,9 @@ reg = <0x94b5100 0x1000>; }; - irq-syscfg { + irq-syscfg@0 { compatible = "st,stih407-irq-syscfg"; + reg = <0 0>; st,syscfg = <&syscfg_core>; st,irq-device = <ST_IRQ_SYSCFG_PMU_0>, <ST_IRQ_SYSCFG_PMU_1>; @@ -380,8 +392,9 @@ status = "disabled"; }; - usb2_picophy0: phy1 { + usb2_picophy0: phy1@0 { compatible = "st,stih407-usb2-phy"; + reg = <0 0>; #phy-cells = <0>; st,syscfg = <&syscfg_core 0x100 0xf4>; resets = <&softreset STIH407_PICOPHY_SOFTRESET>, @@ -389,12 +402,13 @@ reset-names = "global", "port"; }; - miphy28lp_phy: miphy28lp@9b22000 { + miphy28lp_phy: miphy28lp@0 { compatible = "st,miphy28lp-phy"; st,syscfg = <&syscfg_core>; #address-cells = <1>; #size-cells = <1>; ranges; + reg = <0 0>; phy_port0: port@9b22000 { reg = <0x9b22000 0xff>, @@ -805,6 +819,7 @@ st231_gp0: st231-gp0@0 { compatible = "st,st231-rproc"; + reg = <0 0>; memory-region = <&gp0_reserved>; resets = <&softreset STIH407_ST231_GP0_SOFTRESET>; reset-names = "sw_reset"; @@ -818,6 +833,7 @@ st231_delta: st231-delta@0 { compatible = "st,st231-rproc"; + reg = <0 0>; memory-region = <&delta_reserved>; resets = <&softreset STIH407_ST231_DMU_SOFTRESET>; reset-names = "sw_reset"; @@ -885,13 +901,6 @@ status = "disabled"; }; - sti_sasg_codec: sti-sasg-codec { - compatible = "st,stih407-sas-codec"; - #sound-dai-cells = <1>; - status = "disabled"; - st,syscfg = <&syscfg_core>; - }; - sti_uni_player0: sti-uni-player@8d80000 { compatible = "st,stih407-uni-player-hdmi"; #sound-dai-cells = <0>; @@ -980,8 +989,9 @@ status = "disabled"; }; - delta0 { + delta0@0 { compatible = "st,st-delta"; + reg = <0 0>; clock-names = "delta", "delta-st231", "delta-flash-promip"; diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index a29090077fdf5..53c6888d1fc0e 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -45,7 +45,7 @@ }; soc { - pin-controller-sbc { + pin-controller-sbc@961f080 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stih407-sbc-pinctrl"; @@ -369,7 +369,7 @@ }; }; - pin-controller-front0 { + pin-controller-front0@920f080 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stih407-front-pinctrl"; @@ -929,7 +929,7 @@ }; }; - pin-controller-front1 { + pin-controller-front1@921f080 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stih407-front-pinctrl"; @@ -962,7 +962,7 @@ }; }; - pin-controller-rear { + pin-controller-rear@922f080 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stih407-rear-pinctrl"; @@ -1157,7 +1157,7 @@ }; }; - pin-controller-flash { + pin-controller-flash@923f080 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stih407-flash-pinctrl"; diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi index 11fdecd9312e1..57efc87dec2b0 100644 --- a/arch/arm/boot/dts/stih407.dtsi +++ b/arch/arm/boot/dts/stih407.dtsi @@ -11,11 +11,11 @@ #include <dt-bindings/gpio/gpio.h> / { soc { - sti-display-subsystem { + sti-display-subsystem@0 { compatible = "st,sti-display-subsystem"; #address-cells = <1>; #size-cells = <1>; - + reg = <0 0>; assigned-clocks = <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>, <&clk_s_c0_pll1 0>, @@ -107,6 +107,7 @@ compatible = "st,stih407-hdmi"; reg = <0x8d04000 0x1000>; reg-names = "hdmi-reg"; + #sound-dai-cells = <0>; interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>; interrupt-names = "irq"; clock-names = "pix", diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts index 6c6b4cc37e979..2a5a9802a5ec7 100644 --- a/arch/arm/boot/dts/stih410-b2120.dts +++ b/arch/arm/boot/dts/stih410-b2120.dts @@ -15,10 +15,10 @@ chosen { bootargs = "clk_ignore_unused"; - linux,stdout-path = &sbc_serial0; + stdout-path = &sbc_serial0; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x80000000>; }; @@ -37,11 +37,11 @@ sd-uhs-ddr50; }; - usb2_picophy1: phy2 { + usb2_picophy1: phy2@0 { status = "okay"; }; - usb2_picophy2: phy3 { + usb2_picophy2: phy3@0 { status = "okay"; }; @@ -61,7 +61,7 @@ status = "okay"; }; - sti-display-subsystem { + sti-display-subsystem@0 { sti-hda@8d02000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts index 50d36758391c1..155caa8c002ad 100644 --- a/arch/arm/boot/dts/stih410-b2260.dts +++ b/arch/arm/boot/dts/stih410-b2260.dts @@ -16,10 +16,10 @@ chosen { bootargs = "clk_ignore_unused"; - linux,stdout-path = &uart1; + stdout-path = &uart1; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x40000000>; }; @@ -29,36 +29,54 @@ ethernet0 = ðernet0; }; - soc { + leds { + compatible = "gpio-leds"; + user_green_1 { + label = "User_green_1"; + gpios = <&pio1 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; - leds { - compatible = "gpio-leds"; - user_green_1 { - label = "User_green_1"; - gpios = <&pio1 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; + user_green_2 { + label = "User_green_2"; + gpios = <&pio4 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; - user_green_2 { - label = "User_green_2"; - gpios = <&pio4 1 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; + user_green_3 { + label = "User_green_3"; + gpios = <&pio2 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + user_green_4 { + label = "User_green_4"; + gpios = <&pio2 5 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; - user_green_3 { - label = "User_green_3"; - gpios = <&pio2 1 GPIO_ACTIVE_LOW>; - default-state = "off"; + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "STI-B2260"; + status = "okay"; + + simple-audio-card,dai-link0 { + /* DAC */ + format = "i2s"; + mclk-fs = <128>; + cpu { + sound-dai = <&sti_uni_player0>; }; - user_green_4 { - label = "User_green_4"; - gpios = <&pio2 5 GPIO_ACTIVE_LOW>; - default-state = "off"; + codec { + sound-dai = <&sti_hdmi>; }; }; + }; + soc { /* Low speed expansion connector */ uart0: serial@9830000 { label = "LS-UART0"; @@ -128,11 +146,11 @@ status = "okay"; }; - usb2_picophy1: phy2 { + usb2_picophy1: phy2@0 { status = "okay"; }; - usb2_picophy2: phy3 { + usb2_picophy2: phy3@0 { status = "okay"; }; @@ -182,26 +200,7 @@ status = "okay"; }; - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "STI-B2260"; - status = "okay"; - - simple-audio-card,dai-link@0 { - /* DAC */ - format = "i2s"; - mclk-fs = <128>; - cpu { - sound-dai = <&sti_uni_player0>; - }; - - codec { - sound-dai = <&sti_hdmi>; - }; - }; - }; - - miphy28lp_phy: miphy28lp@9b22000 { + miphy28lp_phy: miphy28lp@0 { phy_port1: port@9b2a000 { st,osc-force-ext; diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi index fde5df17f5759..5f11d09cb030d 100644 --- a/arch/arm/boot/dts/stih410-clock.dtsi +++ b/arch/arm/boot/dts/stih410-clock.dtsi @@ -7,6 +7,22 @@ */ #include <dt-bindings/clock/stih410-clks.h> / { + /* + * Fixed 30MHz oscillator inputs to SoC + */ + clk_sysin: clk-sysin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <30000000>; + clock-output-names = "CLK_SYSIN"; + }; + + clk_tmdsout_hdmi: clk-tmdsout-hdmi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; @@ -15,27 +31,6 @@ compatible = "st,stih410-clk", "simple-bus"; /* - * Fixed 30MHz oscillator inputs to SoC - */ - clk_sysin: clk-sysin { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <30000000>; - clock-output-names = "CLK_SYSIN"; - }; - - /* - * ARM Peripheral clock for timers - */ - arm_periph_clk: clk-m-a9-periphs { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&clk_m_a9>; - clock-div = <2>; - clock-mult = <1>; - }; - - /* * A9 PLL. */ clockgen-a9@92b0000 { @@ -64,32 +59,16 @@ <&clockgen_a9_pll 0>, <&clk_s_c0_flexgen 13>, <&clk_m_a9_ext2f_div2>; - }; - - /* - * ARM Peripheral clock for timers - */ - clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - - clocks = <&clk_s_c0_flexgen 13>; - - clock-output-names = "clk-m-a9-ext2f-div2"; - - clock-div = <2>; - clock-mult = <1>; - }; - - /* - * Bootloader initialized system infrastructure clock for - * serial devices. - */ - clk_ext2f_a9: clockgen-c0@13 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <200000000>; - clock-output-names = "clk-s-icn-reg-0"; + /* + * ARM Peripheral clock for timers + */ + arm_periph_clk: clk-m-a9-periphs { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a9>; + clock-div = <2>; + clock-mult = <1>; + }; }; clockgen-a@90ff000 { @@ -214,6 +193,21 @@ <CLK_EXT2F_A9>, <CLK_ICN_LMI>, <CLK_ICN_SBC>; + + /* + * ARM Peripheral clock for timers + */ + clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + + clocks = <&clk_s_c0_flexgen 13>; + + clock-output-names = "clk-m-a9-ext2f-div2"; + + clock-div = <2>; + clock-mult = <1>; + }; }; }; @@ -266,13 +260,7 @@ "clk-s-d2-fs0-ch3"; }; - clk_tmdsout_hdmi: clk-tmdsout-hdmi { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - clockgen-d2@x9106000 { + clockgen-d2@9106000 { compatible = "st,clkgen-c32"; reg = <0x9106000 0x1000>; diff --git a/arch/arm/boot/dts/stih410-pinctrl.dtsi b/arch/arm/boot/dts/stih410-pinctrl.dtsi index b3e9dfc81c07b..5ae1fd66c0b83 100644 --- a/arch/arm/boot/dts/stih410-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih410-pinctrl.dtsi @@ -10,7 +10,7 @@ / { soc { - pin-controller-rear { + pin-controller-rear@922f080 { usb0 { pinctrl_usb0: usb2-0 { diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index 68b5ff91d6a75..3313005ee15ce 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -16,8 +16,9 @@ }; soc { - usb2_picophy1: phy2 { + usb2_picophy1: phy2@0 { compatible = "st,stih407-usb2-phy"; + reg = <0 0>; #phy-cells = <0>; st,syscfg = <&syscfg_core 0xf8 0xf4>; resets = <&softreset STIH407_PICOPHY_SOFTRESET>, @@ -27,8 +28,9 @@ status = "disabled"; }; - usb2_picophy2: phy3 { + usb2_picophy2: phy3@0 { compatible = "st,stih407-usb2-phy"; + reg = <0 0>; #phy-cells = <0>; st,syscfg = <&syscfg_core 0xfc 0xf4>; resets = <&softreset STIH407_PICOPHY_SOFTRESET>, @@ -102,11 +104,12 @@ status = "disabled"; }; - sti-display-subsystem { + sti-display-subsystem@0 { compatible = "st,sti-display-subsystem"; #address-cells = <1>; #size-cells = <1>; + reg = <0 0>; assigned-clocks = <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>, <&clk_s_c0_pll1 0>, @@ -198,6 +201,7 @@ compatible = "st,stih407-hdmi"; reg = <0x8d04000 0x1000>; reg-names = "hdmi-reg"; + #sound-dai-cells = <0>; interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>; interrupt-names = "irq"; clock-names = "pix", @@ -235,7 +239,7 @@ <&clk_s_d2_quadfs 1>; }; - sti-hqvdp@9c000000 { + sti-hqvdp@9c00000 { compatible = "st,stih407-hqvdp"; reg = <0x9C00000 0x100000>; clock-names = "hqvdp", "pix_main"; @@ -273,7 +277,7 @@ interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>; }; - delta0 { + delta0@0 { compatible = "st,st-delta"; clock-names = "delta", "delta-st231", diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts index 7f5f3252bfc7e..cd0d719e31b79 100644 --- a/arch/arm/boot/dts/stih418-b2199.dts +++ b/arch/arm/boot/dts/stih418-b2199.dts @@ -15,10 +15,10 @@ chosen { bootargs = "clk_ignore_unused"; - linux,stdout-path = &sbc_serial0; + stdout-path = &sbc_serial0; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0xc0000000>; }; @@ -28,24 +28,24 @@ ethernet0 = ðernet0; }; + leds { + compatible = "gpio-leds"; + red { + label = "Front Panel LED"; + gpios = <&pio4 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + green { + gpios = <&pio1 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + soc { sbc_serial0: serial@9530000 { status = "okay"; }; - leds { - compatible = "gpio-leds"; - red { - label = "Front Panel LED"; - gpios = <&pio4 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - green { - gpios = <&pio1 3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - i2c@9842000 { status = "okay"; }; @@ -88,7 +88,7 @@ non-removable; }; - miphy28lp_phy: miphy28lp@9b22000 { + miphy28lp_phy: miphy28lp@0 { phy_port0: port@9b22000 { st,osc-rdy; diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi index 9a157c1a99b1d..13fb8db52fc1b 100644 --- a/arch/arm/boot/dts/stih418-clock.dtsi +++ b/arch/arm/boot/dts/stih418-clock.dtsi @@ -7,6 +7,22 @@ */ #include <dt-bindings/clock/stih418-clks.h> / { + /* + * Fixed 30MHz oscillator inputs to SoC + */ + clk_sysin: clk-sysin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <30000000>; + clock-output-names = "CLK_SYSIN"; + }; + + clk_tmdsout_hdmi: clk-tmdsout-hdmi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; @@ -15,27 +31,6 @@ compatible = "st,stih418-clk", "simple-bus"; /* - * Fixed 30MHz oscillator inputs to SoC - */ - clk_sysin: clk-sysin { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <30000000>; - clock-output-names = "CLK_SYSIN"; - }; - - /* - * ARM Peripheral clock for timers - */ - arm_periph_clk: clk-m-a9-periphs { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&clk_m_a9>; - clock-div = <2>; - clock-mult = <1>; - }; - - /* * A9 PLL. */ clockgen-a9@92b0000 { @@ -64,32 +59,17 @@ <&clockgen_a9_pll 0>, <&clk_s_c0_flexgen 13>, <&clk_m_a9_ext2f_div2>; - }; - - /* - * ARM Peripheral clock for timers - */ - clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - - clocks = <&clk_s_c0_flexgen 13>; - clock-output-names = "clk-m-a9-ext2f-div2"; - - clock-div = <2>; - clock-mult = <1>; - }; - - /* - * Bootloader initialized system infrastructure clock for - * serial devices. - */ - clk_ext2f_a9: clockgen-c0@13 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <200000000>; - clock-output-names = "clk-s-icn-reg-0"; + /* + * ARM Peripheral clock for timers + */ + arm_periph_clk: clk-m-a9-periphs { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a9>; + clock-div = <2>; + clock-mult = <1>; + }; }; clockgen-a@90ff000 { @@ -207,6 +187,21 @@ "clk-proc-mixer", "clk-proc-sc", "clk-avsp-hevc"; + + /* + * ARM Peripheral clock for timers + */ + clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + + clocks = <&clk_s_c0_flexgen 13>; + + clock-output-names = "clk-m-a9-ext2f-div2"; + + clock-div = <2>; + clock-mult = <1>; + }; }; }; @@ -259,13 +254,7 @@ "clk-s-d2-fs0-ch3"; }; - clk_tmdsout_hdmi: clk-tmdsout-hdmi { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - clockgen-d2@x9106000 { + clockgen-d2@9106000 { compatible = "st,clkgen-c32"; reg = <0x9106000 0x1000>; diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi index e6525ab4d9bb6..0efb3cd6a86e9 100644 --- a/arch/arm/boot/dts/stih418.dtsi +++ b/arch/arm/boot/dts/stih418.dtsi @@ -30,8 +30,9 @@ }; soc { - usb2_picophy1: phy2 { + usb2_picophy1: phy2@0 { compatible = "st,stih407-usb2-phy"; + reg = <0 0>; #phy-cells = <0>; st,syscfg = <&syscfg_core 0xf8 0xf4>; resets = <&softreset STIH407_PICOPHY_SOFTRESET>, @@ -39,8 +40,9 @@ reset-names = "global", "port"; }; - usb2_picophy2: phy3 { + usb2_picophy2: phy3@0 { compatible = "st,stih407-usb2-phy"; + reg = <0 0>; #phy-cells = <0>; st,syscfg = <&syscfg_core 0xfc 0xf4>; resets = <&softreset STIH407_PICOPHY_SOFTRESET>, diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index 7f80c2c414c89..c67edb1a81211 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -10,23 +10,69 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/media/c8sectpfe.h> / { - soc { - sbc_serial0: serial@9530000 { - status = "okay"; + leds { + compatible = "gpio-leds"; + red { + label = "Front Panel LED"; + gpios = <&pio4 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + green { + gpios = <&pio1 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "STI-B2120"; + status = "okay"; + + simple-audio-card,dai-link0 { + /* HDMI */ + format = "i2s"; + mclk-fs = <128>; + cpu { + sound-dai = <&sti_uni_player0>; + }; + + codec { + sound-dai = <&sti_hdmi>; + }; + }; + + simple-audio-card,dai-link1 { + /* DAC */ + format = "i2s"; + mclk-fs = <256>; + frame-inversion = <1>; + cpu { + sound-dai = <&sti_uni_player2>; + }; + + codec { + sound-dai = <&sti_sasg_codec 1>; + }; }; - leds { - compatible = "gpio-leds"; - red { - label = "Front Panel LED"; - gpios = <&pio4 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; + simple-audio-card,dai-link2 { + /* SPDIF */ + format = "left_j"; + mclk-fs = <128>; + cpu { + sound-dai = <&sti_uni_player3>; }; - green { - gpios = <&pio1 3 GPIO_ACTIVE_HIGH>; - default-state = "off"; + + codec { + sound-dai = <&sti_sasg_codec 0>; }; }; + }; + + soc { + sbc_serial0: serial@9530000 { + status = "okay"; + }; pwm0: pwm@9810000 { status = "okay"; @@ -80,7 +126,7 @@ st,i2c-min-sda-pulse-width-us = <5>; }; - miphy28lp_phy: miphy28lp@9b22000 { + miphy28lp_phy: miphy28lp@0 { phy_port0: port@9b22000 { st,osc-rdy; @@ -126,7 +172,7 @@ clock-names = "c8sectpfe"; /* tsin0 is TSA on NIMA */ - tsin0: port@0 { + tsin0: port { tsin-num = <0>; serial-not-parallel; i2c-bus = <&ssc2>; @@ -147,53 +193,11 @@ status = "okay"; }; - sti_sasg_codec: sti-sasg-codec { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spdif_out>; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "STI-B2120"; - status = "okay"; - - simple-audio-card,dai-link@0 { - /* HDMI */ - format = "i2s"; - mclk-fs = <128>; - cpu { - sound-dai = <&sti_uni_player0>; - }; - - codec { - sound-dai = <&sti_hdmi>; - }; - }; - simple-audio-card,dai-link@1 { - /* DAC */ - format = "i2s"; - mclk-fs = <256>; - frame-inversion = <1>; - cpu { - sound-dai = <&sti_uni_player2>; - }; - - codec { - sound-dai = <&sti_sasg_codec 1>; - }; - }; - simple-audio-card,dai-link@2 { - /* SPDIF */ - format = "left_j"; - mclk-fs = <128>; - cpu { - sound-dai = <&sti_uni_player3>; - }; - - codec { - sound-dai = <&sti_sasg_codec 0>; - }; + syscfg_core: core-syscfg@92b0000 { + sti_sasg_codec: sti-sasg-codec { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif_out>; }; }; }; diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 293ecb9572271..7eb786a2d6247 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -144,6 +144,13 @@ }; }; }; + + mmc_vcard: mmc_vcard { + compatible = "regulator-fixed"; + regulator-name = "mmc_vcard"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &adc { @@ -254,6 +261,18 @@ status = "okay"; }; +&sdio { + status = "okay"; + vmmc-supply = <&mmc_vcard>; + cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_HIGH>; + cd-inverted; + pinctrl-names = "default", "opendrain"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_pins_od>; + bus-width = <4>; + max-frequency = <12500000>; +}; + &timers1 { status = "okay"; diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts index 2d4e717176945..8c081eaf20fea 100644 --- a/arch/arm/boot/dts/stm32746g-eval.dts +++ b/arch/arm/boot/dts/stm32746g-eval.dts @@ -42,6 +42,7 @@ /dts-v1/; #include "stm32f746.dtsi" +#include "stm32f746-pinctrl.dtsi" #include <dt-bindings/input/input.h> / { @@ -90,6 +91,13 @@ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>; clock-names = "main_clk"; }; + + mmc_vcard: mmc_vcard { + compatible = "regulator-fixed"; + regulator-name = "mmc_vcard"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &clk_hse { @@ -112,6 +120,16 @@ status = "okay"; }; +&sdio1 { + status = "okay"; + vmmc-supply = <&mmc_vcard>; + broken-cd; + pinctrl-names = "default", "opendrain"; + pinctrl-0 = <&sdio_pins_a>; + pinctrl-1 = <&sdio_pins_od_a>; + bus-width = <4>; +}; + &usart1 { pinctrl-0 = <&usart1_pins_a>; pinctrl-names = "default"; @@ -119,7 +137,7 @@ }; &usbotg_hs { - dr_mode = "host"; + dr_mode = "otg"; phys = <&usbotg_hs_phy>; phy-names = "usb2-phy"; pinctrl-0 = <&usbotg_hs_pins_a>; diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi index ae94d86c53c49..35202896c0935 100644 --- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi @@ -338,6 +338,37 @@ slew-rate = <3>; }; }; + + sdio_pins: sdio_pins@0 { + pins { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDIO_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDIO_D3 */ + <STM32_PINMUX('C', 12, AF12)>, /* SDIO_CK */ + <STM32_PINMUX('D', 2, AF12)>; /* SDIO_CMD */ + drive-push-pull; + slew-rate = <2>; + }; + }; + + sdio_pins_od: sdio_pins_od@0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDIO_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDIO_D3 */ + <STM32_PINMUX('C', 12, AF12)>; /* SDIO_CK */ + drive-push-pull; + slew-rate = <2>; + }; + + pins2 { + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDIO_CMD */ + drive-open-drain; + slew-rate = <2>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 10099df8b73ef..ede77e0f1c41d 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -511,6 +511,17 @@ }; }; + sdio: sdio@40012c00 { + compatible = "arm,pl180", "arm,primecell"; + arm,primecell-periphid = <0x00880180>; + reg = <0x40012c00 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(SDIO)>; + clock-names = "apb_pclk"; + interrupts = <49>; + max-frequency = <48000000>; + status = "disabled"; + }; + syscfg: system-config@40013800 { compatible = "syscon"; reg = <0x40013800 0x400>; diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts index c18acbe4cf4e2..2f76726bf335b 100644 --- a/arch/arm/boot/dts/stm32f469-disco.dts +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -48,6 +48,8 @@ /dts-v1/; #include "stm32f429.dtsi" #include "stm32f469-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "STMicroelectronics STM32F469i-DISCO board"; @@ -66,10 +68,46 @@ serial0 = &usart3; }; + mmc_vcard: mmc_vcard { + compatible = "regulator-fixed"; + regulator-name = "mmc_vcard"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + soc { dma-ranges = <0xc0000000 0x0 0x10000000>; }; + leds { + compatible = "gpio-leds"; + green { + gpios = <&gpiog 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + orange { + gpios = <&gpiod 4 GPIO_ACTIVE_LOW>; + }; + red { + gpios = <&gpiod 5 GPIO_ACTIVE_LOW>; + }; + blue { + gpios = <&gpiok 3 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + button@0 { + label = "User"; + linux,code = <KEY_WAKEUP>; + gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>; + }; + }; + /* This turns on vbus for otg for host mode (dwc2) */ vcc5v_otg: vcc5v-otg-regulator { compatible = "regulator-fixed"; @@ -120,6 +158,18 @@ }; }; +&sdio { + status = "okay"; + vmmc-supply = <&mmc_vcard>; + cd-gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>; + cd-inverted; + broken-cd; + pinctrl-names = "default", "opendrain"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_pins_od>; + bus-width = <4>; +}; + &usart3 { pinctrl-0 = <&usart3_pins_a>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi new file mode 100644 index 0000000000000..9314128df1859 --- /dev/null +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi @@ -0,0 +1,289 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2017 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +#include <dt-bindings/pinctrl/stm32-pinfunc.h> +#include <dt-bindings/mfd/stm32f7-rcc.h> + +/ { + soc { + pinctrl: pin-controller { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40020000 0x3000>; + interrupt-parent = <&exti>; + st,syscfg = <&syscfg 0x8>; + pins-are-numbered; + + gpioa: gpio@40020000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>; + st,bank-name = "GPIOA"; + }; + + gpiob: gpio@40020400 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x400 0x400>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>; + st,bank-name = "GPIOB"; + }; + + gpioc: gpio@40020800 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x800 0x400>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>; + st,bank-name = "GPIOC"; + }; + + gpiod: gpio@40020c00 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0xc00 0x400>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>; + st,bank-name = "GPIOD"; + }; + + gpioe: gpio@40021000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOE)>; + st,bank-name = "GPIOE"; + }; + + gpiof: gpio@40021400 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1400 0x400>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOF)>; + st,bank-name = "GPIOF"; + }; + + gpiog: gpio@40021800 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1800 0x400>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOG)>; + st,bank-name = "GPIOG"; + }; + + gpioh: gpio@40021c00 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1c00 0x400>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOH)>; + st,bank-name = "GPIOH"; + }; + + gpioi: gpio@40022000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOI)>; + st,bank-name = "GPIOI"; + }; + + gpioj: gpio@40022400 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2400 0x400>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOJ)>; + st,bank-name = "GPIOJ"; + }; + + gpiok: gpio@40022800 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2800 0x400>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOK)>; + st,bank-name = "GPIOK"; + }; + + cec_pins_a: cec@0 { + pins { + pinmux = <STM32_PINMUX('A', 15, AF4)>; /* HDMI CEC */ + slew-rate = <0>; + drive-open-drain; + bias-disable; + }; + }; + + usart1_pins_a: usart1@0 { + pins1 { + pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */ + bias-disable; + }; + }; + + usart1_pins_b: usart1@1 { + pins1 { + pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 7, AF7)>; /* USART1_RX */ + bias-disable; + }; + }; + + i2c1_pins_b: i2c1@0 { + pins { + pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1 SDA */ + <STM32_PINMUX('B', 8, AF4)>; /* I2C1 SCL */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + usbotg_hs_pins_a: usbotg-hs@0 { + pins { + pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */ + <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */ + <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */ + <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */ + <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */ + <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */ + <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */ + <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */ + <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */ + <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */ + <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */ + <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + usbotg_hs_pins_b: usbotg-hs@1 { + pins { + pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */ + <STM32_PINMUX('C', 2, AF10)>, /* OTG_HS_ULPI_DIR */ + <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */ + <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */ + <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */ + <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */ + <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */ + <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */ + <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */ + <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */ + <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */ + <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + usbotg_fs_pins_a: usbotg-fs@0 { + pins { + pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */ + <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */ + <STM32_PINMUX('A', 12, AF10)>; /* OTG_FS_DP */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + sdio_pins_a: sdio_pins_a@0 { + pins { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1 D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1 D3 */ + <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1 CLK */ + <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1 CMD */ + drive-push-pull; + slew-rate = <2>; + }; + }; + + sdio_pins_od_a: sdio_pins_od_a@0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1 D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1 D3 */ + <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1 CLK */ + drive-push-pull; + slew-rate = <2>; + }; + + pins2 { + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1 CMD */ + drive-open-drain; + slew-rate = <2>; + }; + }; + + sdio_pins_b: sdio_pins_b@0 { + pins { + pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */ + <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */ + <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2 D2 */ + <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2 D3 */ + <STM32_PINMUX('D', 6, AF11)>, /* SDMMC2 CLK */ + <STM32_PINMUX('D', 7, AF11)>; /* SDMMC2 CMD */ + drive-push-pull; + slew-rate = <2>; + }; + }; + + sdio_pins_od_b: sdio_pins_od_b@0 { + pins1 { + pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */ + <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */ + <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2 D2 */ + <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2 D3 */ + <STM32_PINMUX('D', 6, AF11)>; /* SDMMC2 CLK */ + drive-push-pull; + slew-rate = <2>; + }; + + pins2 { + pinmux = <STM32_PINMUX('D', 7, AF11)>; /* SDMMC2 CMD */ + drive-open-drain; + slew-rate = <2>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts index 4d85dba59e1de..be94c6ad7e94a 100644 --- a/arch/arm/boot/dts/stm32f746-disco.dts +++ b/arch/arm/boot/dts/stm32f746-disco.dts @@ -42,7 +42,9 @@ /dts-v1/; #include "stm32f746.dtsi" +#include "stm32f746-pinctrl.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> / { model = "STMicroelectronics STM32F746-DISCO board"; @@ -75,12 +77,30 @@ regulator-name = "vcc5_host1"; regulator-always-on; }; + + mmc_vcard: mmc_vcard { + compatible = "regulator-fixed"; + regulator-name = "mmc_vcard"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &clk_hse { clock-frequency = <25000000>; }; +&sdio1 { + status = "okay"; + vmmc-supply = <&mmc_vcard>; + cd-gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>; + cd-inverted; + pinctrl-names = "default", "opendrain"; + pinctrl-0 = <&sdio_pins_a>; + pinctrl-1 = <&sdio_pins_od_a>; + bus-width = <4>; +}; + &usart1 { pinctrl-0 = <&usart1_pins_b>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32f746-pinctrl.dtsi b/arch/arm/boot/dts/stm32f746-pinctrl.dtsi new file mode 100644 index 0000000000000..fcfd2ac7239bb --- /dev/null +++ b/arch/arm/boot/dts/stm32f746-pinctrl.dtsi @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2017 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +#include "stm32f7-pinctrl.dtsi" + +&pinctrl{ + compatible = "st,stm32f746-pinctrl"; +}; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index 5f66d151eedb1..4be2ee575b19c 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -42,7 +42,6 @@ #include "skeleton.dtsi" #include "armv7-m.dtsi" -#include <dt-bindings/pinctrl/stm32-pinfunc.h> #include <dt-bindings/clock/stm32fx-clock.h> #include <dt-bindings/mfd/stm32f7-rcc.h> @@ -429,6 +428,28 @@ status = "disabled"; }; + sdio2: sdio2@40011c00 { + compatible = "arm,pl180", "arm,primecell"; + arm,primecell-periphid = <0x00880180>; + reg = <0x40011c00 0x400>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(SDMMC2)>; + clock-names = "apb_pclk"; + interrupts = <103>; + max-frequency = <48000000>; + status = "disabled"; + }; + + sdio1: sdio1@40012c00 { + compatible = "arm,pl180", "arm,primecell"; + arm,primecell-periphid = <0x00880180>; + reg = <0x40012c00 0x400>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(SDMMC1)>; + clock-names = "apb_pclk"; + interrupts = <49>; + max-frequency = <48000000>; + status = "disabled"; + }; + syscfg: system-config@40013800 { compatible = "syscon"; reg = <0x40013800 0x400>; @@ -498,222 +519,6 @@ reg = <0x40007000 0x400>; }; - pin-controller { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stm32f746-pinctrl"; - ranges = <0 0x40020000 0x3000>; - interrupt-parent = <&exti>; - st,syscfg = <&syscfg 0x8>; - pins-are-numbered; - - gpioa: gpio@40020000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x0 0x400>; - clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>; - st,bank-name = "GPIOA"; - }; - - gpiob: gpio@40020400 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x400 0x400>; - clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>; - st,bank-name = "GPIOB"; - }; - - gpioc: gpio@40020800 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x800 0x400>; - clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>; - st,bank-name = "GPIOC"; - }; - - gpiod: gpio@40020c00 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0xc00 0x400>; - clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>; - st,bank-name = "GPIOD"; - }; - - gpioe: gpio@40021000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x400>; - clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOE)>; - st,bank-name = "GPIOE"; - }; - - gpiof: gpio@40021400 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1400 0x400>; - clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOF)>; - st,bank-name = "GPIOF"; - }; - - gpiog: gpio@40021800 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1800 0x400>; - clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOG)>; - st,bank-name = "GPIOG"; - }; - - gpioh: gpio@40021c00 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1c00 0x400>; - clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOH)>; - st,bank-name = "GPIOH"; - }; - - gpioi: gpio@40022000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x400>; - clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOI)>; - st,bank-name = "GPIOI"; - }; - - gpioj: gpio@40022400 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2400 0x400>; - clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOJ)>; - st,bank-name = "GPIOJ"; - }; - - gpiok: gpio@40022800 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2800 0x400>; - clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOK)>; - st,bank-name = "GPIOK"; - }; - - cec_pins_a: cec@0 { - pins { - pinmux = <STM32_PINMUX('A', 15, AF4)>; /* HDMI CEC */ - slew-rate = <0>; - drive-open-drain; - bias-disable; - }; - }; - - usart1_pins_a: usart1@0 { - pins1 { - pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */ - bias-disable; - }; - }; - - usart1_pins_b: usart1@1 { - pins1 { - pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = <STM32_PINMUX('B', 7, AF7)>; /* USART1_RX */ - bias-disable; - }; - }; - - i2c1_pins_b: i2c1@0 { - pins { - pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1 SDA */ - <STM32_PINMUX('B', 8, AF4)>; /* I2C1 SCL */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - usbotg_hs_pins_a: usbotg-hs@0 { - pins { - pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */ - <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */ - <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */ - <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */ - <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */ - <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */ - <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */ - <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */ - <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */ - <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */ - <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */ - <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */ - bias-disable; - drive-push-pull; - slew-rate = <2>; - }; - }; - - usbotg_hs_pins_b: usbotg-hs@1 { - pins { - pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */ - <STM32_PINMUX('C', 2, AF10)>, /* OTG_HS_ULPI_DIR */ - <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */ - <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */ - <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */ - <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */ - <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */ - <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */ - <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */ - <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */ - <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */ - <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */ - bias-disable; - drive-push-pull; - slew-rate = <2>; - }; - }; - - usbotg_fs_pins_a: usbotg-fs@0 { - pins { - pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */ - <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */ - <STM32_PINMUX('A', 12, AF10)>; /* OTG_FS_DP */ - bias-disable; - drive-push-pull; - slew-rate = <2>; - }; - }; - }; - crc: crc@40023000 { compatible = "st,stm32f7-crc"; reg = <0x40023000 0x400>; @@ -771,6 +576,9 @@ interrupts = <77>; clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHS)>; clock-names = "otg"; + g-rx-fifo-size = <256>; + g-np-tx-fifo-size = <32>; + g-tx-fifo-size = <128 128 64 64 64 64 32 32>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts index 4463ca13a740e..2241eecdabfe5 100644 --- a/arch/arm/boot/dts/stm32f769-disco.dts +++ b/arch/arm/boot/dts/stm32f769-disco.dts @@ -42,11 +42,13 @@ /dts-v1/; #include "stm32f746.dtsi" +#include "stm32f769-pinctrl.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> / { model = "STMicroelectronics STM32F769-DISCO board"; - compatible = "st,stm32f769-disco", "st,stm32f7"; + compatible = "st,stm32f769-disco", "st,stm32f769"; chosen { bootargs = "root=/dev/ram"; @@ -61,6 +63,42 @@ serial0 = &usart1; }; + leds { + compatible = "gpio-leds"; + green { + gpios = <&gpioj 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + red { + gpios = <&gpioj 13 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + button@0 { + label = "User"; + linux,code = <KEY_HOME>; + gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>; + }; + }; + + usbotg_hs_phy: usb-phy { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>; + clock-names = "main_clk"; + }; + + mmc_vcard: mmc_vcard { + compatible = "regulator-fixed"; + regulator-name = "mmc_vcard"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &cec { @@ -73,8 +111,33 @@ clock-frequency = <25000000>; }; +&rtc { + status = "okay"; +}; + +&sdio2 { + status = "okay"; + vmmc-supply = <&mmc_vcard>; + cd-gpios = <&gpioi 15 GPIO_ACTIVE_HIGH>; + cd-inverted; + broken-cd; + pinctrl-names = "default", "opendrain"; + pinctrl-0 = <&sdio_pins_b>; + pinctrl-1 = <&sdio_pins_od_b>; + bus-width = <4>; +}; + &usart1 { pinctrl-0 = <&usart1_pins_a>; pinctrl-names = "default"; status = "okay"; }; + +&usbotg_hs { + dr_mode = "otg"; + phys = <&usbotg_hs_phy>; + phy-names = "usb2-phy"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32f769-pinctrl.dtsi b/arch/arm/boot/dts/stm32f769-pinctrl.dtsi new file mode 100644 index 0000000000000..31005dd9929c4 --- /dev/null +++ b/arch/arm/boot/dts/stm32f769-pinctrl.dtsi @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2017 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +#include "stm32f7-pinctrl.dtsi" + +&pinctrl{ + compatible = "st,stm32f769-pinctrl"; +}; diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi index 65c1cd0439872..0f15dfb98381d 100644 --- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi @@ -49,6 +49,8 @@ #size-cells = <1>; compatible = "st,stm32h743-pinctrl"; ranges = <0 0x58020000 0x3000>; + interrupt-parent = <&exti>; + st,syscfg = <&syscfg 0x8>; pins-are-numbered; gpioa: gpio@58020000 { @@ -57,6 +59,8 @@ reg = <0x0 0x400>; clocks = <&rcc GPIOA_CK>; st,bank-name = "GPIOA"; + interrupt-controller; + #interrupt-cells = <2>; }; gpiob: gpio@58020400 { @@ -65,6 +69,8 @@ reg = <0x400 0x400>; clocks = <&rcc GPIOB_CK>; st,bank-name = "GPIOB"; + interrupt-controller; + #interrupt-cells = <2>; }; gpioc: gpio@58020800 { @@ -73,6 +79,8 @@ reg = <0x800 0x400>; clocks = <&rcc GPIOC_CK>; st,bank-name = "GPIOC"; + interrupt-controller; + #interrupt-cells = <2>; }; gpiod: gpio@58020c00 { @@ -81,6 +89,8 @@ reg = <0xc00 0x400>; clocks = <&rcc GPIOD_CK>; st,bank-name = "GPIOD"; + interrupt-controller; + #interrupt-cells = <2>; }; gpioe: gpio@58021000 { @@ -89,6 +99,8 @@ reg = <0x1000 0x400>; clocks = <&rcc GPIOE_CK>; st,bank-name = "GPIOE"; + interrupt-controller; + #interrupt-cells = <2>; }; gpiof: gpio@58021400 { @@ -97,6 +109,8 @@ reg = <0x1400 0x400>; clocks = <&rcc GPIOF_CK>; st,bank-name = "GPIOF"; + interrupt-controller; + #interrupt-cells = <2>; }; gpiog: gpio@58021800 { @@ -105,6 +119,8 @@ reg = <0x1800 0x400>; clocks = <&rcc GPIOG_CK>; st,bank-name = "GPIOG"; + interrupt-controller; + #interrupt-cells = <2>; }; gpioh: gpio@58021c00 { @@ -113,6 +129,8 @@ reg = <0x1c00 0x400>; clocks = <&rcc GPIOH_CK>; st,bank-name = "GPIOH"; + interrupt-controller; + #interrupt-cells = <2>; }; gpioi: gpio@58022000 { @@ -121,6 +139,8 @@ reg = <0x2000 0x400>; clocks = <&rcc GPIOI_CK>; st,bank-name = "GPIOI"; + interrupt-controller; + #interrupt-cells = <2>; }; gpioj: gpio@58022400 { @@ -129,6 +149,8 @@ reg = <0x2400 0x400>; clocks = <&rcc GPIOJ_CK>; st,bank-name = "GPIOJ"; + interrupt-controller; + #interrupt-cells = <2>; }; gpiok: gpio@58022800 { @@ -137,6 +159,8 @@ reg = <0x2800 0x400>; clocks = <&rcc GPIOK_CK>; st,bank-name = "GPIOK"; + interrupt-controller; + #interrupt-cells = <2>; }; usart1_pins: usart1@0 { @@ -164,6 +188,26 @@ bias-disable; }; }; + + usbotg_hs_pins_a: usbotg-hs@0 { + pins { + pinmux = <STM32_PINMUX('H', 4, AF10)>, /* ULPI_NXT */ + <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */ + <STM32_PINMUX('C', 0, AF10)>, /* ULPI_STP> */ + <STM32_PINMUX('A', 5, AF10)>, /* ULPI_CK> */ + <STM32_PINMUX('A', 3, AF10)>, /* ULPI_D0> */ + <STM32_PINMUX('B', 0, AF10)>, /* ULPI_D1> */ + <STM32_PINMUX('B', 1, AF10)>, /* ULPI_D2> */ + <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */ + <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */ + <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */ + <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */ + <STM32_PINMUX('B', 5, AF10)>; /* ULPI_D7> */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index bbfcbaca0b36b..2bb103e1194da 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -44,6 +44,7 @@ #include "armv7-m.dtsi" #include <dt-bindings/clock/stm32h7-clks.h> #include <dt-bindings/mfd/stm32h7-rcc.h> +#include <dt-bindings/interrupt-controller/irq.h> / { clocks { @@ -100,6 +101,27 @@ }; }; + spi2: spi@40003800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x40003800 0x400>; + interrupts = <36>; + clocks = <&rcc SPI2_CK>; + status = "disabled"; + + }; + + spi3: spi@40003c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x40003c00 0x400>; + interrupts = <51>; + clocks = <&rcc SPI3_CK>; + status = "disabled"; + }; + usart2: serial@40004400 { compatible = "st,stm32f7-uart"; reg = <0x40004400 0x400>; @@ -140,6 +162,36 @@ clocks = <&rcc USART1_CK>; }; + spi1: spi@40013000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x40013000 0x400>; + interrupts = <35>; + clocks = <&rcc SPI1_CK>; + status = "disabled"; + }; + + spi4: spi@40013400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x40013400 0x400>; + interrupts = <84>; + clocks = <&rcc SPI4_CK>; + status = "disabled"; + }; + + spi5: spi@40015000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x40015000 0x400>; + interrupts = <85>; + clocks = <&rcc SPI5_CK>; + status = "disabled"; + }; + dma1: dma@40020000 { compatible = "st,stm32-dma"; reg = <0x40020000 0x400>; @@ -217,6 +269,27 @@ }; }; + usbotg_hs: usb@40040000 { + compatible = "st,stm32f7-hsotg"; + reg = <0x40040000 0x40000>; + interrupts = <77>; + clocks = <&rcc USB1OTG_CK>; + clock-names = "otg"; + g-rx-fifo-size = <256>; + g-np-tx-fifo-size = <32>; + g-tx-fifo-size = <128 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + usbotg_fs: usb@40080000 { + compatible = "st,stm32f4x9-fsotg"; + reg = <0x40080000 0x40000>; + interrupts = <101>; + clocks = <&rcc USB2OTG_CK>; + clock-names = "otg"; + status = "disabled"; + }; + mdma1: dma@52000000 { compatible = "st,stm32h7-mdma"; reg = <0x52000000 0x1000>; @@ -227,6 +300,29 @@ dma-requests = <32>; }; + exti: interrupt-controller@58000000 { + compatible = "st,stm32h7-exti"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x58000000 0x400>; + interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <62>, <76>; + }; + + syscfg: system-config@58000400 { + compatible = "syscon"; + reg = <0x58000400 0x400>; + }; + + spi6: spi@58001400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32h7-spi"; + reg = <0x58001400 0x400>; + interrupts = <86>; + clocks = <&rcc SPI6_CK>; + status = "disabled"; + }; + lptimer2: timer@58002400 { #address-cells = <1>; #size-cells = <0>; @@ -304,7 +400,7 @@ }; }; - vrefbuf: regulator@58003C00 { + vrefbuf: regulator@58003c00 { compatible = "st,stm32-vrefbuf"; reg = <0x58003C00 0x8>; clocks = <&rcc VREF_CK>; @@ -313,6 +409,20 @@ status = "disabled"; }; + rtc: rtc@58004000 { + compatible = "st,stm32h7-rtc"; + reg = <0x58004000 0x400>; + clocks = <&rcc RTCAPB_CK>, <&rcc RTC_CK>; + clock-names = "pclk", "rtc_ck"; + assigned-clocks = <&rcc RTC_CK>; + assigned-clock-parents = <&rcc LSE_CK>; + interrupt-parent = <&exti>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "alarm"; + st,syscfg = <&pwrcfg>; + status = "disabled"; + }; + rcc: reset-clock-controller@58024400 { compatible = "st,stm32h743-rcc", "st,stm32-rcc"; reg = <0x58024400 0x400>; diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts index 79e841d94079c..45e088c55741a 100644 --- a/arch/arm/boot/dts/stm32h743i-disco.dts +++ b/arch/arm/boot/dts/stm32h743i-disco.dts @@ -63,7 +63,7 @@ }; &clk_hse { - clock-frequency = <125000000>; + clock-frequency = <25000000>; }; &usart2 { diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts index 9f0e72c67219a..c7187e18ea169 100644 --- a/arch/arm/boot/dts/stm32h743i-eval.dts +++ b/arch/arm/boot/dts/stm32h743i-eval.dts @@ -68,6 +68,14 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + usbotg_hs_phy: usb-phy { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + clocks = <&rcc USB1ULPI_CK>; + clock-names = "main_clk"; + }; + }; &adc_12 { @@ -84,9 +92,21 @@ clock-frequency = <25000000>; }; +&rtc { + status = "okay"; +}; + &usart1 { pinctrl-0 = <&usart1_pins>; pinctrl-names = "default"; status = "okay"; }; +&usbotg_hs { + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phys = <&usbotg_hs_phy>; + phy-names = "usb2-phy"; + dr_mode = "otg"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi new file mode 100644 index 0000000000000..c0743305f31b6 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -0,0 +1,185 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2017 - All Rights Reserved + * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics. + */ +#include <dt-bindings/pinctrl/stm32-pinfunc.h> + +/ { + soc { + pinctrl: pin-controller { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp157-pinctrl"; + ranges = <0 0x50002000 0xa400>; + pins-are-numbered; + + gpioa: gpio@50002000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&clk_pll3_p>; + st,bank-name = "GPIOA"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&clk_pll3_p>; + st,bank-name = "GPIOB"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&clk_pll3_p>; + st,bank-name = "GPIOC"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x400>; + clocks = <&clk_pll3_p>; + st,bank-name = "GPIOD"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x400>; + clocks = <&clk_pll3_p>; + st,bank-name = "GPIOE"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x400>; + clocks = <&clk_pll3_p>; + st,bank-name = "GPIOF"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x6000 0x400>; + clocks = <&clk_pll3_p>; + st,bank-name = "GPIOG"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x7000 0x400>; + clocks = <&clk_pll3_p>; + st,bank-name = "GPIOH"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@5000a000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x8000 0x400>; + clocks = <&clk_pll3_p>; + st,bank-name = "GPIOI"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 128 16>; + }; + + gpioj: gpio@5000b000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x9000 0x400>; + clocks = <&clk_pll3_p>; + st,bank-name = "GPIOJ"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 144 16>; + }; + + gpiok: gpio@5000c000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0xa000 0x400>; + clocks = <&clk_pll3_p>; + st,bank-name = "GPIOK"; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 160 8>; + }; + + uart4_pins_a: uart4@0 { + pins1 { + pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + }; + + pinctrl_z: pin-controller-z { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp157-z-pinctrl"; + ranges = <0 0x54004000 0x400>; + pins-are-numbered; + status = "disabled"; + + gpioz: gpio@54004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x400>; + clocks = <&clk_pll2_p>; + st,bank-name = "GPIOZ"; + st,bank-ioport = <11>; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts new file mode 100644 index 0000000000000..9f90337a22e38 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2017 - All Rights Reserved + * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics. + */ +/dts-v1/; + +#include "stm32mp157c.dtsi" +#include "stm32mp157-pinctrl.dtsi" + +/ { + model = "STMicroelectronics STM32MP157C eval daughter"; + compatible = "st,stm32mp157c-ed1", "st,stm32mp157"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0xC0000000 0x40000000>; + }; + + aliases { + serial0 = &uart4; + }; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts new file mode 100644 index 0000000000000..57e6dbc52e093 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2017 - All Rights Reserved + * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics. + */ +/dts-v1/; + +#include "stm32mp157c-ed1.dts" + +/ { + model = "STMicroelectronics STM32MP157C eval daughter on eval mother"; + compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &uart4; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi new file mode 100644 index 0000000000000..9e17e42b02b23 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -0,0 +1,194 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2017 - All Rights Reserved + * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics. + */ +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + }; + + psci { + compatible = "arm,psci"; + method = "smc"; + cpu_off = <0x84000002>; + cpu_on = <0x84000003>; + }; + + aliases { + gpio0 = &gpioa; + gpio1 = &gpiob; + gpio2 = &gpioc; + gpio3 = &gpiod; + gpio4 = &gpioe; + gpio5 = &gpiof; + gpio6 = &gpiog; + gpio7 = &gpioh; + gpio8 = &gpioi; + gpio9 = &gpioj; + gpio10 = &gpiok; + }; + + intc: interrupt-controller@a0021000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xa0021000 0x1000>, + <0xa0022000 0x2000>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&intc>; + }; + + clocks { + clk_hse: clk-hse { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + clk_pll_per: clk-pll-per { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <64000000>; + }; + + clk_hsi: clk-hsi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <64000000>; + }; + + clk_lse: clk-lse { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + clk_lsi: clk-lsi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32000>; + }; + + clk_csi: clk-csi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <4000000>; + }; + + clk_pclk1: clk-pclk1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <86000000>; + }; + + clk_pll3_p: clk-pll3_p { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <172000000>; + }; + + clk_pll2_p: clk-pll2_p { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <264000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges; + + usart2: serial@4000e000 { + compatible = "st,stm32h7-uart"; + reg = <0x4000e000 0x400>; + interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>; + clocks = <&clk_pclk1>; + status = "disabled"; + }; + + usart3: serial@4000f000 { + compatible = "st,stm32h7-uart"; + reg = <0x4000f000 0x400>; + interrupts = <GIC_SPI 39 IRQ_TYPE_NONE>; + clocks = <&clk_pclk1>; + status = "disabled"; + }; + + uart4: serial@40010000 { + compatible = "st,stm32h7-uart"; + reg = <0x40010000 0x400>; + interrupts = <GIC_SPI 52 IRQ_TYPE_NONE>; + clocks = <&clk_pclk1>; + status = "disabled"; + }; + + uart5: serial@40011000 { + compatible = "st,stm32h7-uart"; + reg = <0x40011000 0x400>; + interrupts = <GIC_SPI 53 IRQ_TYPE_NONE>; + clocks = <&clk_pclk1>; + status = "disabled"; + }; + + uart7: serial@40018000 { + compatible = "st,stm32h7-uart"; + reg = <0x40018000 0x400>; + interrupts = <GIC_SPI 82 IRQ_TYPE_NONE>; + clocks = <&clk_pclk1>; + status = "disabled"; + }; + + uart8: serial@40019000 { + compatible = "st,stm32h7-uart"; + reg = <0x40019000 0x400>; + interrupts = <GIC_SPI 83 IRQ_TYPE_NONE>; + clocks = <&clk_pclk1>; + status = "disabled"; + }; + + usart6: serial@44003000 { + compatible = "st,stm32h7-uart"; + reg = <0x44003000 0x400>; + interrupts = <GIC_SPI 71 IRQ_TYPE_NONE>; + clocks = <&clk_pclk1>; + status = "disabled"; + }; + + usart1: serial@5c000000 { + compatible = "st,stm32h7-uart"; + reg = <0x5c000000 0x400>; + interrupts = <GIC_SPI 37 IRQ_TYPE_NONE>; + clocks = <&clk_pclk1>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index 09e909576c61f..6c254ec4c85b7 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -164,8 +164,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index 39ba4ccb9e2e5..38a2c41349524 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -106,8 +106,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index dfc88aee4fe35..cf7b392dff314 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -123,8 +123,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 1982c8c238c54..197a1f2b75ff7 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -162,8 +162,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts index 147cbc5e08ac5..896e27a087278 100644 --- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts +++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts @@ -150,8 +150,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts index 41ca8bded89f0..ea7a59dcf8f9a 100644 --- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts +++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts @@ -141,8 +141,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index f33e42d6ce8ba..cc988ccd5ca75 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -106,8 +106,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts index 35c57d065dd8f..f63767cddd8e4 100644 --- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts @@ -78,8 +78,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts index 9482e831a9a16..26d0c1d6a02b4 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet1.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts @@ -152,8 +152,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 4b5c91c8e85bf..5d096528e75a5 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -142,8 +142,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts index 13224f5ac1666..221acd10f6c84 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -300,8 +300,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts index d22bd79562d87..80ecd78247ac4 100644 --- a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts +++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts @@ -106,8 +106,7 @@ pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts index 879141ca60270..247fa27ef7178 100644 --- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts @@ -133,8 +133,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index 435c551aef0f3..0dbf69576512b 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -132,8 +132,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index 1b639e5f91720..f9d74e21031d5 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -96,8 +96,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts index 7198b34e2e508..059fe9c5d0243 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts @@ -56,12 +56,27 @@ chosen { stdout-path = "serial0:115200n8"; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; }; &codec { status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -70,11 +85,20 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts index e460da2eb1396..17dcdf0311189 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts @@ -82,8 +82,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index 49247fbe6acd5..b74a614965377 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -97,7 +97,6 @@ 864000 1300000 624000 1250000 >; - cooling-max-level = <2>; }; &de { @@ -165,8 +164,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 6e140547b638f..b97a0f2f20b97 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -140,8 +140,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts index 5081303f79e73..84b25be1ac943 100644 --- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts +++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts @@ -138,8 +138,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 4f2f2eea07552..77e8436beed46 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -123,8 +123,6 @@ 624000 1250000 >; #cooling-cells = <2>; - cooling-min-level = <0>; - cooling-max-level = <3>; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts index d2dee8d434bf3..39504d720efc9 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts @@ -93,8 +93,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t003>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - cd-inverted; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts index 16f839df42272..8d4fb9331212d 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -104,8 +104,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - cd-inverted; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/sun5i-a10s-mk802.dts index 020aa9d6c31da..dd7fd5c3d76f1 100644 --- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts +++ b/arch/arm/boot/dts/sun5i-a10s-mk802.dts @@ -92,8 +92,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - cd-inverted; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index da95118af4dc2..2c902ed2c87af 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -201,8 +201,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - cd-inverted; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ status = "okay"; }; @@ -211,8 +210,7 @@ pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ - cd-inverted; + cd-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts index 262b3669f04d7..034853d1c08f5 100644 --- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -80,8 +80,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - cd-inverted; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts index 5482be174e122..3f68ef5d92a02 100644 --- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts +++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts @@ -130,8 +130,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_wobo_i5>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ - cd-inverted; + cd-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts index 3dbb0d7c2f8c7..378214d8316ed 100644 --- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts +++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts @@ -125,8 +125,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index 584fa579ded20..7ee0c3f6d7a1b 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -120,8 +120,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index 3a831eaf1dfc4..aa4b34fd91269 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -99,8 +99,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 4b9af423c6d57..437ad913a3730 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -194,8 +194,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 4e830f5cb7f1d..b1d827765530f 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -116,8 +116,6 @@ 432000 1200000 >; #cooling-cells = <2>; - cooling-min-level = <0>; - cooling-max-level = <5>; }; &pio { diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts index 558c16a30543e..5f0adc0f7bb4c 100644 --- a/arch/arm/boot/dts/sun5i-gr8-evb.dts +++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts @@ -236,8 +236,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gr8_evb>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi index 49229b3d54925..8acbaab14fe51 100644 --- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi @@ -127,8 +127,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 85eff0307ca42..939c497a6f700 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -117,8 +117,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ - cd-inverted; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 19e382a11297e..ce4f9e9834bf1 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -218,8 +218,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ - cd-inverted; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts index 010a84c7c012a..d659be9dbc507 100644 --- a/arch/arm/boot/dts/sun6i-a31-i7.dts +++ b/arch/arm/boot/dts/sun6i-a31-i7.dts @@ -58,6 +58,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -93,6 +104,10 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -113,6 +128,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -124,8 +149,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ - cd-inverted; + cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ status = "okay"; }; @@ -161,6 +185,10 @@ status = "okay"; }; +&tcon0 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 50605fd4449e4..9698f6d38d030 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -107,8 +107,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ - cd-inverted; + cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts index 5219556e9f73e..bb14b171b1609 100644 --- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts +++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts @@ -107,8 +107,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ - cd-inverted; + cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 72d3fe44ecaf0..c72992556a868 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -113,8 +113,6 @@ 480000 1000000 >; #cooling-cells = <2>; - cooling-min-level = <0>; - cooling-max-level = <3>; }; cpu@1 { diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 0cdb38ab33779..4cb9664cdb293 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -151,8 +151,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ - cd-inverted; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts index 298476485bb47..da0ccf5a2c445 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts @@ -167,8 +167,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */ - cd-inverted; + cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index b2758dd8ce438..b8b79c0e9ee05 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -120,8 +120,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */ - cd-inverted; + cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index f3edf9ca435cf..aab6c1720ef79 100644 --- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -102,8 +102,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ - cd-inverted; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi index 3cc4046b904a5..4e72e4f3ef96e 100644 --- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi @@ -69,8 +69,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ - cd-inverted; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index 4ed3162e3e5a0..763cb03033c46 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -184,8 +184,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m1p>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ - cd-inverted; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 88a1c2363c6ca..70dfc4ac0bb5f 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -63,6 +63,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -109,6 +120,10 @@ >; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -130,6 +145,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -159,8 +184,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ - cd-inverted; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts index e7af1b7c33d59..0898eb6162f59 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -158,8 +158,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ - cd-inverted; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 39f43e4eb7423..942ac9dfd4a5a 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -165,8 +165,7 @@ pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 8c9bedc602ecd..5649161de1d72 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -206,8 +206,7 @@ pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index 6e6264cd69f86..1f0e5ecbf0c48 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -163,8 +163,7 @@ pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index 55809973a568e..2e3f2f29d124a 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -160,8 +160,7 @@ pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts index 794e7617f545f..926fa194eb1b4 100644 --- a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts +++ b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts @@ -107,8 +107,7 @@ pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; /* PI5 */ - cd-inverted; + cd-gpios = <&pio 8 5 GPIO_ACTIVE_LOW>; /* PI5 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts index 8a8a6dbcd4142..1b05ba466e7d9 100644 --- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts +++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts @@ -124,8 +124,7 @@ pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index 442f3c755f365..b1ab7c1c33e32 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -227,8 +227,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ - cd-inverted; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index 43c94787ef079..e91a209850bc5 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -120,8 +120,7 @@ pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts index f7413094183c0..6109f794a9c10 100644 --- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts +++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts @@ -66,12 +66,27 @@ chosen { stdout-path = "serial0:115200n8"; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; }; &codec { status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -80,6 +95,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -112,8 +137,7 @@ pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts index 64c8ef9a27562..f080f82b58efd 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -61,6 +61,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -79,6 +90,10 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -107,6 +122,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -190,8 +215,7 @@ pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; @@ -200,8 +224,7 @@ pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olimex_som_evb>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */ - cd-inverted; + cd-gpios = <&pio 7 0 GPIO_ACTIVE_LOW>; /* PH0 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts new file mode 100644 index 0000000000000..c56620a8fb20f --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Source for A20-SOM204-EVB-eMMC Board + * + * Copyright (C) 2018 Olimex Ltd. + * Author: Stefan Mavrodiev <stefan@olimex.com> + */ + +/dts-v1/; +#include "sun7i-a20-olimex-som204-evb.dts" + +/ { + model = "Olimex A20-SOM204-EVB-eMMC"; + compatible = "olimex,a20-olimex-som204-evb-emmc", "allwinner,sun7i-a20"; + + mmc2_pwrseq: mmc2_pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&mmc2_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + emmc: emmc@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts new file mode 100644 index 0000000000000..eae8e267b9ef2 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts @@ -0,0 +1,335 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Source for A20-SOM204-EVB Board + * + * Copyright (C) 2018 Olimex Ltd. + * Author: Stefan Mavrodiev <stefan@olimex.com> + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Olimex A20-SOM204-EVB"; + compatible = "olimex,a20-olimex-som204-evb", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + serial1 = &uart4; + serial2 = &uart7; + spi0 = &spi1; + spi1 = &spi2; + ethernet1 = &rtl8723bs; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + stat { + label = "a20-som204-evb:green:stat"; + gpios = <&pio 8 0 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led1 { + label = "a20-som204-evb:green:led1"; + gpios = <&pio 8 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led2 { + label = "a20-som204-evb:yellow:led2"; + gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + rtl_pwrseq: rtl_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; + }; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy3>; + phy-mode = "rgmii"; + phy-supply = <®_vcc3v3>; + + snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + status = "okay"; + + phy3: ethernet-phy@3 { + reg = <3>; + }; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +/* Exposed to UEXT1 */ +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c16"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +/* Exposed to UEXT2 */ +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; + cd-inverted; + status = "okay"; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&rtl_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8723bs: sdio_wifi@1 { + reg = <1>; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + bt_uart_pins: bt_uart_pins@0 { + pins = "PG6", "PG7", "PG8"; + function = "uart3"; + }; +}; + +#include "axp209.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +®_ahci_5v { + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-always-on; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pg"; +}; + +®_usb0_vbus { + gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +/* Exposed to UEXT1 */ +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>, + <&spi1_cs0_pins_a>; + status = "okay"; +}; + +/* Exposed to UEXT2 */ +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>, + <&spi2_cs0_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +/* Used for RTL8723BS bluetooth */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&bt_uart_pins>; + status = "okay"; +}; + +/* Exposed to UEXT1 */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + +/* Exposed to UEXT2 */ +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index edf9c3c6c0d7f..d20fd03596e93 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -158,8 +158,7 @@ pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index ba250189d07f6..b828677f331d5 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -159,8 +159,7 @@ pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index dffbaa24b3ee7..866d230593be4 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -226,8 +226,7 @@ pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; @@ -236,8 +235,7 @@ pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ - cd-inverted; + cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts index 7af4c8fc18656..f5c7178eb0635 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -61,6 +61,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -98,6 +109,10 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -119,6 +134,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -144,8 +169,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ - cd-inverted; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ status = "okay"; }; @@ -154,8 +178,7 @@ pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_orangepi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ - cd-inverted; + cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts index 0a8d4a05e8a09..7a4244e575893 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts @@ -135,8 +135,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ - cd-inverted; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index fb591f32252ce..bfca960b03e03 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -158,8 +158,7 @@ pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index 777152a3df0f9..c576f101fbdef 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -159,8 +159,7 @@ pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts index f8d0aafb9f88f..8202c87ca6a3a 100644 --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -154,8 +154,7 @@ pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts index 7f8405a0dd0fe..ff5c1086585ca 100644 --- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -123,8 +123,7 @@ pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index bd0cd3204273d..e529e4ff21749 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -47,7 +47,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> #include <dt-bindings/dma/sun4i-a10.h> -#include <dt-bindings/clock/sun4i-a10-ccu.h> +#include <dt-bindings/clock/sun7i-a20-ccu.h> #include <dt-bindings/reset/sun4i-a10-ccu.h> / { @@ -116,8 +116,6 @@ 144000 1000000 >; #cooling-cells = <2>; - cooling-min-level = <0>; - cooling-max-level = <6>; }; cpu@1 { @@ -1217,6 +1215,31 @@ #size-cells = <0>; }; + mali: gpu@1c40000 { + compatible = "allwinner,sun7i-a20-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pmu"; + clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_GPU>; + + assigned-clocks = <&ccu CLK_GPU>; + assigned-clock-rates = <384000000>; + }; + gmac: ethernet@1c50000 { compatible = "allwinner,sun7i-a20-gmac"; reg = <0x01c50000 0x10000>; diff --git a/arch/arm/boot/dts/sun8i-a23-evb.dts b/arch/arm/boot/dts/sun8i-a23-evb.dts index 87289a60c5202..8a93697df3a52 100644 --- a/arch/arm/boot/dts/sun8i-a23-evb.dts +++ b/arch/arm/boot/dts/sun8i-a23-evb.dts @@ -107,8 +107,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_evb>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts index be9a6b8d7a1e4..a1a1eb64caeb9 100644 --- a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts +++ b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts @@ -43,7 +43,6 @@ /dts-v1/; #include "sun8i-a33.dtsi" -#include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -62,8 +61,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pin_olinuxino>; green { label = "a33-olinuxino:green:usr"; @@ -72,17 +69,24 @@ }; }; +&codec { + status = "okay"; +}; + +&dai { + status = "okay"; +}; + &ehci0 { status = "okay"; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; + pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ status = "okay"; }; @@ -90,23 +94,6 @@ status = "okay"; }; -&pio { - led_pin_olinuxino: led_pins@0 { - pins = "PB7"; - function = "gpio_out"; - }; - - mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { - pins = "PB4"; - function = "gpio_in"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - pins = "PB3"; - function = "gpio_in"; - }; -}; - &r_rsb { status = "okay"; @@ -122,6 +109,14 @@ #include "axp223.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <3300000>; @@ -195,6 +190,21 @@ vcc-lcd-supply = <®_dc1sw>; }; +&sound { + /* Board level jack widgets */ + simple-audio-card,widgets = "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack"; + /* Board level routing. First 2 routes copied from SoC level */ + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "HP", "HPCOM", + "Headphone Jack", "HP", + "MIC1", "Microphone Jack", + "Microphone Jack", "MBIAS"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_b>; @@ -211,8 +221,6 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; usb0_id_det-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index 433cf2a2a9a25..541acb4d2b910 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -144,8 +144,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 50eb84fa246ac..a21f2ed07a523 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -289,7 +289,6 @@ clock-names = "ahb", "mod", "ram"; resets = <&ccu RST_BUS_DE_FE>; - status = "disabled"; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts index 5091cecbcd1eb..36ecebaff3c04 100644 --- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts +++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -87,9 +87,8 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ bus-width = <4>; - cd-inverted; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 6550bf0e594bf..3b579d7567c80 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -60,6 +60,31 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + blue { + label = "bananapi-m3:blue:usr"; + gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; + }; + + green { + label = "bananapi-m3:green:usr"; + gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; + }; + }; + reg_usb1_vbus: reg-usb1-vbus { compatible = "regulator-fixed"; regulator-name = "usb1-vbus"; @@ -82,6 +107,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { /* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */ status = "okay"; @@ -100,6 +129,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mdio { rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; @@ -112,8 +151,7 @@ pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index 6da08cd0e1079..88decb0747ac3 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -176,8 +176,7 @@ pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 511fca491fe8c..1537ce148cc19 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -128,6 +128,14 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu100 { + cpu-supply = <®_dcdc3>; +}; + &de { status = "okay"; }; @@ -231,6 +239,10 @@ #include "axp81x.dtsi" +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 7f4955a5fab75..568307639be84 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -60,51 +60,63 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { + clocks = <&ccu CLK_C0CPUX>; + clock-names = "cpu"; compatible = "arm,cortex-a7"; device_type = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; reg = <0>; }; cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; reg = <1>; }; cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; reg = <2>; }; cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; reg = <3>; }; - cpu@100 { + cpu100: cpu@100 { + clocks = <&ccu CLK_C1CPUX>; + clock-names = "cpu"; compatible = "arm,cortex-a7"; device_type = "cpu"; + operating-points-v2 = <&cpu1_opp_table>; reg = <0x100>; }; cpu@101 { compatible = "arm,cortex-a7"; device_type = "cpu"; + operating-points-v2 = <&cpu1_opp_table>; reg = <0x101>; }; cpu@102 { compatible = "arm,cortex-a7"; device_type = "cpu"; + operating-points-v2 = <&cpu1_opp_table>; reg = <0x102>; }; cpu@103 { compatible = "arm,cortex-a7"; device_type = "cpu"; + operating-points-v2 = <&cpu1_opp_table>; reg = <0x103>; }; }; @@ -155,7 +167,7 @@ de: display-engine { compatible = "allwinner,sun8i-a83t-display-engine"; - allwinner,pipelines = <&mixer0>; + allwinner,pipelines = <&mixer0>, <&mixer1>; status = "disabled"; }; @@ -164,6 +176,112 @@ device_type = "memory"; }; + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-microvolt = <840000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <840000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <840000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-864000000 { + opp-hz = /bits/ 64 <864000000>; + opp-microvolt = <840000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-912000000 { + opp-hz = /bits/ 64 <912000000>; + opp-microvolt = <840000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <840000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1128000000 { + opp-hz = /bits/ 64 <1128000000>; + opp-microvolt = <840000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <840000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + }; + + cpu1_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-microvolt = <840000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <840000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <840000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-864000000 { + opp-hz = /bits/ 64 <864000000>; + opp-microvolt = <840000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-912000000 { + opp-hz = /bits/ 64 <912000000>; + opp-microvolt = <840000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <840000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1128000000 { + opp-hz = /bits/ 64 <1128000000>; + opp-microvolt = <840000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <840000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -208,6 +326,29 @@ }; }; + mixer1: mixer@1200000 { + compatible = "allwinner,sun8i-a83t-de2-mixer-1"; + reg = <0x01200000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER1>, + <&display_clocks CLK_MIXER1>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_WB>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer1_out: port@1 { + reg = <1>; + + mixer1_out_tcon1: endpoint { + remote-endpoint = <&tcon1_in_mixer1>; + }; + }; + }; + }; + syscon: syscon@1c00000 { compatible = "allwinner,sun8i-a83t-system-controller", "syscon"; @@ -256,6 +397,40 @@ }; }; + tcon1: lcd-controller@1c0d000 { + compatible = "allwinner,sun8i-a83t-tcon-tv"; + reg = <0x01c0d000 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>; + clock-names = "ahb", "tcon-ch1"; + resets = <&ccu RST_BUS_TCON1>; + reset-names = "lcd"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon1_in: port@0 { + reg = <0>; + + tcon1_in_mixer1: endpoint { + remote-endpoint = <&mixer1_out_tcon1>; + }; + }; + + tcon1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon1_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon1>; + }; + }; + }; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun8i-a83t-mmc", "allwinner,sun7i-a20-mmc"; @@ -427,6 +602,11 @@ drive-strength = <40>; }; + hdmi_pins: hdmi-pins { + pins = "PH6", "PH7", "PH8"; + function = "hdmi"; + }; + i2c0_pins: i2c0-pins { pins = "PH0", "PH1"; function = "i2c0"; @@ -685,6 +865,50 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; }; + hdmi: hdmi@1ee0000 { + compatible = "allwinner,sun8i-a83t-dw-hdmi"; + reg = <0x01ee0000 0x10000>; + reg-io-width = <1>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>, + <&ccu CLK_HDMI>; + clock-names = "iahb", "isfr", "tmds"; + resets = <&ccu RST_BUS_HDMI1>; + reset-names = "ctrl"; + phys = <&hdmi_phy>; + phy-names = "hdmi-phy"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pins>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + + hdmi_in_tcon1: endpoint { + remote-endpoint = <&tcon1_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + }; + }; + }; + + hdmi_phy: hdmi-phy@1ef0000 { + compatible = "allwinner,sun8i-a83t-hdmi-phy"; + reg = <0x01ef0000 0x10000>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_HDMI0>; + reset-names = "phy"; + #phy-cells = <0>; + }; + r_intc: interrupt-controller@1f00c00 { compatible = "allwinner,sun8i-a83t-r-intc", "allwinner,sun6i-a31-r-intc"; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts new file mode 100644 index 0000000000000..7d01f93226586 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> + * + * Based on sun8i-h3-bananapi-m2-plus.dts, which is: + * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org> + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Banana Pi BPI-M2-Zero"; + compatible = "sinovoip,bpi-m2-zero", "allwinner,sun8i-h2-plus"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + + pwr_led { + label = "bananapi-m2-zero:red:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + + sw4 { + label = "power"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + }; +}; + +&ehci0 { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + /* + * On the production batch of this board the card detect GPIO is + * high active (card inserted), although on the early samples it's + * low active. + */ + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + /* + * There're two micro-USB connectors, one is power-only and another is + * OTG. The Vbus of these two connectors are connected together, so + * the external USB device will be powered just by the power input + * from the power-only USB port. + */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts index 112f09c67d670..3356f4210d45b 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts @@ -68,6 +68,14 @@ }; }; +&spi0 { + status = "okay"; + + flash@0 { + compatible = "mxicy,mx25l12805d", "jedec,spi-nor"; + }; +}; + &ohci1 { /* * RTL8152B USB-Ethernet adapter is connected to USB1, diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts index 6713d0f2b3f4d..0bc031fe4c56b 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -112,18 +112,13 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ status = "okay"; }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; vmmc-supply = <®_vcc_wifi>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -139,10 +134,6 @@ }; }; -&mmc1_pins_a { - bias-pull-up; -}; - &ohci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts index f1c3f1cc4d976..30540dc8e0c5f 100644 --- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts @@ -61,6 +61,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -100,6 +111,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -129,6 +144,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -136,18 +161,13 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ status = "okay"; }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; vmmc-supply = <®_vcc3v3>; vqmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&wifi_pwrseq>; diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts index 10da56e86ab80..cf1f970b0c6f7 100644 --- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -61,6 +61,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -100,6 +111,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -108,6 +123,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -115,18 +140,13 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ status = "okay"; }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; non-removable; diff --git a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts index d406571a0dd67..b20a710da7bc6 100644 --- a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts +++ b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts @@ -23,6 +23,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -120,6 +131,10 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -143,6 +158,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -150,12 +175,9 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc_io>; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts index a6e61915d6488..65cba10508025 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts @@ -101,8 +101,6 @@ }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; vmmc-supply = <®_vcc3v3>; vqmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&wifi_pwrseq>; @@ -119,6 +117,16 @@ }; }; +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + &ohci1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts index c77fbca4f227a..9412668bb8881 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts @@ -49,6 +49,21 @@ aliases { ethernet0 = &emac; }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; +}; + +&de { + status = "okay"; }; &ehci1 { @@ -66,6 +81,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts index 03ff6f8b93ff8..6246d3eff39de 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts @@ -72,16 +72,35 @@ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ }; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + }; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ + interrupt-names = "host-wake"; + }; }; &uart0 { diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi index 7646e331bd293..f110ee3822398 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi +++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi @@ -95,10 +95,7 @@ &mmc0 { bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; - cd-inverted; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; status = "okay"; vmmc-supply = <®_vcc3v3>; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts index b20be95b49d5c..f1fc6bdca8be7 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts @@ -62,6 +62,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -114,6 +125,10 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -125,6 +140,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -132,18 +157,13 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ status = "okay"; }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts index a70a1daf4e2c3..476ae8e387ca2 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts @@ -61,6 +61,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -91,6 +102,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -99,6 +114,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -106,18 +131,13 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ status = "okay"; }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; non-removable; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts index 82e5d28cd698c..3328fe583c9ba 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts @@ -60,6 +60,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -90,6 +101,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -102,16 +117,22 @@ phy-handle = <&int_mii_phy>; phy-mode = "mii"; allwinner,leds-active-low; +}; + +&hdmi { status = "okay"; }; +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts index a10281b455f50..71fb732089397 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts @@ -59,8 +59,6 @@ }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; non-removable; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts index d22546df1b822..cea4d647ecbf3 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts @@ -60,6 +60,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -98,6 +109,10 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -121,6 +136,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -128,12 +153,9 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 8495deecedad4..10da8ed7db813 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -79,6 +79,33 @@ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; + + soc { + mali: gpu@1c40000 { + compatible = "allwinner,sun8i-h3-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pmu"; + clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_BUS_GPU>; + + assigned-clocks = <&ccu CLK_GPU>; + assigned-clock-rates = <384000000>; + }; + }; }; &ccu { diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts index eaf09666720dc..0dbdb29a8fff9 100644 --- a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts +++ b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts @@ -150,8 +150,7 @@ pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts index 8c5efe2a9881c..27d9ccd0ef2f1 100644 --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -164,8 +164,7 @@ &mmc0 { vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */ - cd-inverted; + cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi index d6bd15898db6d..880096c7e2523 100644 --- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi @@ -85,8 +85,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ status = "okay"; }; @@ -125,6 +124,14 @@ #include "axp223.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <3000000>; diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts index fe16fc0eb5184..a26d72c3f9b58 100644 --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts @@ -150,8 +150,7 @@ &mmc0 { vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */ - cd-inverted; + cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index 4024639aa0057..85da85faf869a 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -74,6 +74,52 @@ }; }; + vga-connector { + compatible = "vga-connector"; + label = "vga"; + ddc-i2c-bus = <&i2c3>; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_dac_out>; + }; + }; + }; + + vga-dac { + compatible = "corpro,gm7123", "adi,adv7123", "dumb-vga-dac"; + vdd-supply = <®_dcdc1>; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + vga_dac_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_vga>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + vga_dac_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&ac100_rtc 1>; @@ -83,13 +129,22 @@ }; }; +&de { + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */ - cd-inverted; + cd-gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; /* PH18 */ status = "okay"; }; @@ -403,6 +458,18 @@ #include "axp809.dtsi" +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd0_rgb888_pins>; +}; + +&tcon0_out { + tcon0_out_vga: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_dac_in>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ph_pins>; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index a9b807be99a02..58a199b0e4943 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -125,8 +125,7 @@ pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */ - cd-inverted; + cd-gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; /* PH8 */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 90eac0b2a1938..25591d6883ef2 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -63,48 +63,72 @@ cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; + cci-control-port = <&cci_control0>; + clock-frequency = <12000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x0>; }; cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; + cci-control-port = <&cci_control0>; + clock-frequency = <12000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x1>; }; cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; + cci-control-port = <&cci_control0>; + clock-frequency = <12000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x2>; }; cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; + cci-control-port = <&cci_control0>; + clock-frequency = <12000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x3>; }; cpu4: cpu@100 { compatible = "arm,cortex-a15"; device_type = "cpu"; + cci-control-port = <&cci_control1>; + clock-frequency = <18000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x100>; }; cpu5: cpu@101 { compatible = "arm,cortex-a15"; device_type = "cpu"; + cci-control-port = <&cci_control1>; + clock-frequency = <18000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x101>; }; cpu6: cpu@102 { compatible = "arm,cortex-a15"; device_type = "cpu"; + cci-control-port = <&cci_control1>; + clock-frequency = <18000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x102>; }; cpu7: cpu@103 { compatible = "arm,cortex-a15"; device_type = "cpu"; + cci-control-port = <&cci_control1>; + clock-frequency = <18000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x103>; }; }; @@ -224,6 +248,12 @@ }; }; + de: display-engine { + compatible = "allwinner,sun9i-a80-display-engine"; + allwinner,pipelines = <&fe0>, <&fe1>; + status = "disabled"; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -234,6 +264,25 @@ */ ranges = <0 0 0 0x20000000>; + sram_b: sram@20000 { + /* 256 KiB secure SRAM at 0x20000 */ + compatible = "mmio-sram"; + reg = <0x00020000 0x40000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00020000 0x40000>; + + smp-sram@1000 { + /* + * This is checked by BROM to determine if + * cpu0 should jump to SMP entry vector + */ + compatible = "allwinner,sun9i-a80-smp-sram"; + reg = <0x1000 0x8>; + }; + }; + ehci0: usb@a00000 { compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a00000 0x100>; @@ -347,6 +396,11 @@ #reset-cells = <1>; }; + cpucfg@1700000 { + compatible = "allwinner,sun9i-a80-cpucfg"; + reg = <0x01700000 0x100>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c0f000 0x1000>; @@ -431,6 +485,36 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + cci: cci@1c90000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01c90000 0x1000>; + ranges = <0x0 0x01c90000 0x10000>; + + cci_control0: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control1: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + + pmu@9000 { + compatible = "arm,cci-400-pmu,r1"; + reg = <0x9000 0x5000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + de_clocks: clock@3000000 { compatible = "allwinner,sun9i-a80-de-clks"; reg = <0x03000000 0x30>; @@ -445,6 +529,381 @@ #reset-cells = <1>; }; + fe0: display-frontend@3100000 { + compatible = "allwinner,sun9i-a80-display-frontend"; + reg = <0x03100000 0x40000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_FE0>, <&de_clocks CLK_FE0>, + <&de_clocks CLK_DRAM_FE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_clocks RST_FE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_deu0: endpoint@0 { + reg = <0>; + remote-endpoint = <&deu0_in_fe0>; + }; + }; + }; + }; + + fe1: display-frontend@3140000 { + compatible = "allwinner,sun9i-a80-display-frontend"; + reg = <0x03140000 0x40000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_FE1>, <&de_clocks CLK_FE1>, + <&de_clocks CLK_DRAM_FE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_clocks RST_FE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe1_out_deu1: endpoint@0 { + reg = <0>; + remote-endpoint = <&deu1_in_fe1>; + }; + }; + }; + }; + + be0: display-backend@3200000 { + compatible = "allwinner,sun9i-a80-display-backend"; + reg = <0x03200000 0x40000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_BE0>, <&de_clocks CLK_BE0>, + <&de_clocks CLK_DRAM_BE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_clocks RST_BE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_deu0: endpoint@0 { + reg = <0>; + remote-endpoint = <&deu0_out_be0>; + }; + + be0_in_deu1: endpoint@1 { + reg = <1>; + remote-endpoint = <&deu1_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_in_be0>; + }; + }; + }; + }; + + be1: display-backend@3240000 { + compatible = "allwinner,sun9i-a80-display-backend"; + reg = <0x03240000 0x40000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_BE1>, <&de_clocks CLK_BE1>, + <&de_clocks CLK_DRAM_BE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_clocks RST_BE1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be1_in_deu0: endpoint@0 { + reg = <0>; + remote-endpoint = <&deu0_out_be1>; + }; + + be1_in_deu1: endpoint@1 { + reg = <1>; + remote-endpoint = <&deu1_out_be1>; + }; + }; + + be1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be1_out_drc1: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc1_in_be1>; + }; + }; + }; + }; + + deu0: deu@3300000 { + compatible = "allwinner,sun9i-a80-deu"; + reg = <0x03300000 0x40000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_DEU0>, + <&de_clocks CLK_IEP_DEU0>, + <&de_clocks CLK_DRAM_DEU0>; + clock-names = "ahb", + "mod", + "ram"; + resets = <&de_clocks RST_DEU0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + deu0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + deu0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_deu0>; + }; + }; + + deu0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + deu0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_deu0>; + }; + + deu0_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_deu0>; + }; + }; + }; + }; + + deu1: deu@3340000 { + compatible = "allwinner,sun9i-a80-deu"; + reg = <0x03340000 0x40000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_DEU1>, + <&de_clocks CLK_IEP_DEU1>, + <&de_clocks CLK_DRAM_DEU1>; + clock-names = "ahb", + "mod", + "ram"; + resets = <&de_clocks RST_DEU1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + deu1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + deu1_in_fe1: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe1_out_deu1>; + }; + }; + + deu1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + deu1_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_deu1>; + }; + + deu1_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_deu1>; + }; + }; + }; + }; + + drc0: drc@3400000 { + compatible = "allwinner,sun9i-a80-drc"; + reg = <0x03400000 0x40000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_DRC0>, + <&de_clocks CLK_IEP_DRC0>, + <&de_clocks CLK_DRAM_DRC0>; + clock-names = "ahb", + "mod", + "ram"; + resets = <&de_clocks RST_DRC0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + drc0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_drc0>; + }; + }; + + drc0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + drc0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_drc0>; + }; + }; + }; + }; + + drc1: drc@3440000 { + compatible = "allwinner,sun9i-a80-drc"; + reg = <0x03440000 0x40000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_DRC1>, + <&de_clocks CLK_IEP_DRC1>, + <&de_clocks CLK_DRAM_DRC1>; + clock-names = "ahb", + "mod", + "ram"; + resets = <&de_clocks RST_DRC1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + drc1_in_be1: endpoint@0 { + reg = <0>; + remote-endpoint = <&be1_out_drc1>; + }; + }; + + drc1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + drc1_out_tcon1: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon1_in_drc1>; + }; + }; + }; + }; + + tcon0: lcd-controller@3c00000 { + compatible = "allwinner,sun9i-a80-tcon-lcd"; + reg = <0x03c00000 0x10000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>; + clock-names = "ahb", "tcon-ch0"; + resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>; + reset-names = "lcd", "edp"; + clock-output-names = "tcon0-pixel-clock"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + + tcon1: lcd-controller@3c10000 { + compatible = "allwinner,sun9i-a80-tcon-tv"; + reg = <0x03c10000 0x10000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_LCD1>, <&ccu CLK_LCD1>; + clock-names = "ahb", "tcon-ch1"; + resets = <&ccu RST_BUS_LCD1>, <&ccu RST_BUS_EDP>; + reset-names = "lcd", "edp"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon1_in_drc1: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc1_out_tcon1>; + }; + }; + + tcon1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + ccu: clock@6000000 { compatible = "allwinner,sun9i-a80-ccu"; reg = <0x06000000 0x800>; @@ -494,6 +953,17 @@ function = "i2c3"; }; + lcd0_rgb888_pins: lcd0-rgb888-pins { + pins = "PD0", "PD1", "PD2", "PD3", + "PD4", "PD5", "PD6", "PD7", + "PD8", "PD9", "PD10", "PD11", + "PD12", "PD13", "PD14", "PD15", + "PD16", "PD17", "PD18", "PD19", + "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + function = "lcd0"; + }; + mmc0_pins: mmc0-pins { pins = "PF0", "PF1" ,"PF2", "PF3", "PF4", "PF5"; @@ -658,6 +1128,11 @@ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; }; + prcm@8001400 { + compatible = "allwinner,sun9i-a80-prcm"; + reg = <0x08001400 0x200>; + }; + apbs_rst: reset@80014b0 { reg = <0x080014b0 0x4>; compatible = "allwinner,sun6i-a31-clock-reset"; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 7a83b15225c7c..1be1a02d6df26 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -105,6 +105,12 @@ }; }; + de: display-engine { + compatible = "allwinner,sun8i-h3-display-engine"; + allwinner,pipelines = <&mixer0>; + status = "disabled"; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -123,6 +129,29 @@ #reset-cells = <1>; }; + mixer0: mixer@1100000 { + compatible = "allwinner,sun8i-h3-de2-mixer-0"; + reg = <0x01100000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER0>, + <&display_clocks CLK_MIXER0>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_MIXER0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer0_out: port@1 { + reg = <1>; + + mixer0_out_tcon0: endpoint { + remote-endpoint = <&tcon0_in_mixer0>; + }; + }; + }; + }; + syscon: syscon@1c00000 { compatible = "allwinner,sun8i-h3-system-controller", "syscon"; @@ -138,9 +167,46 @@ #dma-cells = <1>; }; + tcon0: lcd-controller@1c0c000 { + compatible = "allwinner,sun8i-h3-tcon-tv", + "allwinner,sun8i-a83t-tcon-tv"; + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; + clock-names = "ahb", "tcon-ch1"; + resets = <&ccu RST_BUS_TCON0>; + reset-names = "lcd"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + reg = <0>; + + tcon0_in_mixer0: endpoint { + remote-endpoint = <&mixer0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon0_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon0>; + }; + }; + }; + }; + mmc0: mmc@1c0f000 { /* compatible and clocks are in per SoC .dtsi file */ reg = <0x01c0f000 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; @@ -152,6 +218,8 @@ mmc1: mmc@1c10000 { /* compatible and clocks are in per SoC .dtsi file */ reg = <0x01c10000 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; resets = <&ccu RST_BUS_MMC1>; reset-names = "ahb"; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; @@ -348,7 +416,7 @@ function = "i2c2"; }; - mmc0_pins_a: mmc0 { + mmc0_pins: mmc0 { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -356,13 +424,7 @@ bias-pull-up; }; - mmc0_cd_pin: mmc0_cd_pin { - pins = "PF6"; - function = "gpio_in"; - bias-pull-up; - }; - - mmc1_pins_a: mmc1 { + mmc1_pins: mmc1 { pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; function = "mmc1"; @@ -684,6 +746,50 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + hdmi: hdmi@1ee0000 { + compatible = "allwinner,sun8i-h3-dw-hdmi", + "allwinner,sun8i-a83t-dw-hdmi"; + reg = <0x01ee0000 0x10000>; + reg-io-width = <1>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, + <&ccu CLK_HDMI>; + clock-names = "iahb", "isfr", "tmds"; + resets = <&ccu RST_BUS_HDMI1>; + reset-names = "ctrl"; + phys = <&hdmi_phy>; + phy-names = "hdmi-phy"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + + hdmi_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + }; + }; + }; + + hdmi_phy: hdmi-phy@1ef0000 { + compatible = "allwinner,sun8i-h3-hdmi-phy"; + reg = <0x01ef0000 0x10000>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, + <&ccu 6>; + clock-names = "bus", "mod", "pll-0"; + resets = <&ccu RST_BUS_HDMI0>; + reset-names = "phy"; + #phy-cells = <0>; + }; + rtc: rtc@1f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index acd6cf51b15ba..eafff16765b4a 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -780,7 +780,7 @@ compatible = "realtek,rt5640"; reg = <0x1c>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>; realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts index ecffcd115fa77..a6ad759dddb47 100644 --- a/arch/arm/boot/dts/tegra124-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts @@ -1,5 +1,5 @@ /* - * Copyright 2016 Toradex AG + * Copyright 2016-2018 Toradex AG * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -105,7 +105,7 @@ */ i2c@7000c000 { status = "okay"; - clock-frequency = <100000>; + clock-frequency = <400000>; pcie-switch@58 { compatible = "plx,pex8605"; @@ -114,7 +114,7 @@ /* M41T0M6 real time clock on carrier board */ rtc@68 { - compatible = "st,m41t00"; + compatible = "st,m41t0"; reg = <0x68>; }; }; @@ -124,7 +124,6 @@ */ hdmi_ddc: i2c@7000c400 { status = "okay"; - clock-frequency = <100000>; }; /* @@ -133,7 +132,7 @@ */ i2c@7000c500 { status = "okay"; - clock-frequency = <100000>; + clock-frequency = <400000>; }; /* I2C4 (DDC): unused */ @@ -226,9 +225,7 @@ backlight: backlight { compatible = "pwm-backlight"; - - /* BKL1_PWM */ - pwms = <&pwm 3 5000000>; + pwms = <&pwm 3 5000000>; /* BKL1_PWM */ brightness-levels = <255 231 223 207 191 159 127 0>; default-brightness-level = <6>; /* BKL1_ON */ @@ -276,3 +273,13 @@ vin-supply = <®_5v0>; }; }; + +&gpio { + /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */ + pex_perst_n { + gpio-hog; + gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PEX_PERST_N"; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts new file mode 100644 index 0000000000000..8a8d5fa0ecd1e --- /dev/null +++ b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts @@ -0,0 +1,250 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2016-2018 Toradex AG + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra124-apalis-v1.2.dtsi" + +/ { + model = "Toradex Apalis TK1 on Apalis Evaluation Board"; + compatible = "toradex,apalis-tk1-v1.2-eval", "toradex,apalis-tk1-eval", + "toradex,apalis-tk1", "nvidia,tegra124"; + + aliases { + rtc0 = "/i2c@7000c000/rtc@68"; + rtc1 = "/i2c@7000d000/pmic@40"; + rtc2 = "/rtc@7000e000"; + serial0 = &uarta; + serial1 = &uartb; + serial2 = &uartc; + serial3 = &uartd; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + pcie@1003000 { + pci@1,0 { + status = "okay"; + }; + }; + + host1x@50000000 { + hdmi@54280000 { + status = "okay"; + }; + }; + + /* Apalis UART1 */ + serial@70006000 { + status = "okay"; + }; + + /* Apalis UART2 */ + serial@70006040 { + status = "okay"; + }; + + /* Apalis UART3 */ + serial@70006200 { + status = "okay"; + }; + + /* Apalis UART4 */ + serial@70006300 { + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + /* + * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier + * board) + */ + i2c@7000c000 { + status = "okay"; + clock-frequency = <400000>; + + pcie-switch@58 { + compatible = "plx,pex8605"; + reg = <0x58>; + }; + + /* M41T0M6 real time clock on carrier board */ + rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; + }; + + /* GEN2_I2C: unused */ + + /* + * CAM_I2C: I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor + * on carrier board) + */ + i2c@7000c500 { + status = "okay"; + clock-frequency = <400000>; + }; + + /* + * I2C4 (DDC): I2C4_SDA/SCL (DDC) on MXM3 pin 205/207 + * (e.g. display EDID) + */ + hdmi_ddc: i2c@7000c700 { + status = "okay"; + }; + + /* SPI1: Apalis SPI1 */ + spi@7000d400 { + status = "okay"; + spi-max-frequency = <50000000>; + + spidev0: spidev@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <50000000>; + }; + }; + + /* SPI4: Apalis SPI2 */ + spi@7000da00 { + status = "okay"; + spi-max-frequency = <50000000>; + + spidev1: spidev@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <50000000>; + }; + }; + + /* Apalis Serial ATA */ + sata@70020000 { + status = "okay"; + }; + + hda@70030000 { + status = "okay"; + }; + + usb@70090000 { + status = "okay"; + }; + + /* Apalis MMC1 */ + sdhci@700b0000 { + status = "okay"; + /* MMC1_CD# */ + cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>; + bus-width = <4>; + vqmmc-supply = <&vddio_sdmmc1>; + }; + + /* Apalis SD1 */ + sdhci@700b0400 { + status = "okay"; + /* SD1_CD# */ + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + bus-width = <4>; + vqmmc-supply = <&vddio_sdmmc3>; + }; + + /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */ + usb@7d000000 { + status = "okay"; + dr_mode = "otg"; + }; + + usb-phy@7d000000 { + status = "okay"; + vbus-supply = <®_usbo1_vbus>; + }; + + /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */ + usb@7d004000 { + status = "okay"; + }; + + usb-phy@7d004000 { + status = "okay"; + vbus-supply = <®_usbh_vbus>; + }; + + /* EHCI instance 2: USB3_DP/N -> USBH4_DP/N */ + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + status = "okay"; + vbus-supply = <®_usbh_vbus>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 3 5000000>; /* BKL1_PWM */ + brightness-levels = <255 231 223 207 191 159 127 0>; + default-brightness-level = <6>; + /* BKL1_ON */ + enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + wakeup { + label = "WAKE1_MICO"; + gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + /* USBO1_EN */ + reg_usbo1_vbus: regulator-usbo1-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USBO1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_5v0>; + }; + + /* USBH_EN */ + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USBH(2A|2C|2D|3|4)"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_5v0>; + }; +}; + +&gpio { + /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */ + pex_perst_n { + gpio-hog; + gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PEX_PERST_N"; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi new file mode 100644 index 0000000000000..bb67edb016c58 --- /dev/null +++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi @@ -0,0 +1,2052 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2016-2018 Toradex AG + */ + +#include "tegra124.dtsi" +#include "tegra124-apalis-emc.dtsi" + +/* + * Toradex Apalis TK1 Module Device Tree + * Compatible for Revisions 2GB: V1.2A + */ +/ { + model = "Toradex Apalis TK1"; + compatible = "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1", + "nvidia,tegra124"; + + memory { + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + pcie@1003000 { + status = "okay"; + avddio-pex-supply = <&vdd_1v05>; + avdd-pex-pll-supply = <&vdd_1v05>; + avdd-pll-erefe-supply = <&avdd_1v05>; + dvddio-pex-supply = <&vdd_1v05>; + hvdd-pex-pll-e-supply = <®_3v3>; + hvdd-pex-supply = <®_3v3>; + vddio-pex-ctl-supply = <®_3v3>; + + /* Apalis PCIe (additional lane Apalis type specific) */ + pci@1,0 { + /* PCIE1_RX/TX and TS_DIFF1/2 */ + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>; + phy-names = "pcie-0", "pcie-1"; + }; + + /* I210 Gigabit Ethernet Controller (On-module) */ + pci@2,0 { + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>; + phy-names = "pcie-0"; + status = "okay"; + }; + }; + + host1x@50000000 { + hdmi@54280000 { + pll-supply = <®_1v05_avdd_hdmi_pll>; + vdd-supply = <®_3v3_avdd_hdmi>; + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + }; + + gpu@0,57000000 { + /* + * Node left disabled on purpose - the bootloader will enable + * it after having set the VPR up + */ + vdd-supply = <&vdd_gpu>; + }; + + pinmux: pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + /* Analogue Audio (On-module) */ + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_din_pp1 { + nvidia,pins = "dap3_din_pp1"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3_dout_pp2 { + nvidia,pins = "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_sclk_pp3 { + nvidia,pins = "dap3_sclk_pp3"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap_mclk1_pw4 { + nvidia,pins = "dap_mclk1_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis BKL1_ON */ + pbb5 { + nvidia,pins = "pbb5"; + nvidia,function = "vgp5"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis BKL1_PWM */ + pu6 { + nvidia,pins = "pu6"; + nvidia,function = "pwm3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis CAM1_MCLK */ + cam_mclk_pcc0 { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis Digital Audio */ + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_sclk_pa3 { + nvidia,pins = "dap2_sclk_pa3"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb3 { /* DAP1_RESET */ + nvidia,pins = "pbb3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis GPIO */ + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + usb_vbus_en1_pn5 { + nvidia,pins = "usb_vbus_en1_pn5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pex_l0_rst_n_pdd1 { + nvidia,pins = "pex_l0_rst_n_pdd1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_l0_clkreq_n_pdd2 { + nvidia,pins = "pex_l0_clkreq_n_pdd2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_l1_rst_n_pdd5 { + nvidia,pins = "pex_l1_rst_n_pdd5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_l1_clkreq_n_pdd6 { + nvidia,pins = "pex_l1_clkreq_n_pdd6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dp_hpd_pff0 { + nvidia,pins = "dp_hpd_pff0"; + nvidia,function = "dp"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pff2 { + nvidia,pins = "pff2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + owr { /* PEX_L1_CLKREQ_N multiplexed GPIO6 */ + nvidia,pins = "owr"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis HDMI1_CEC */ + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis HDMI1_HPD */ + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis I2C1 */ + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen1_i2c_sda_pc5 { + nvidia,pins = "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis I2C3 (CAM) */ + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + cam_i2c_sda_pbb2 { + nvidia,pins = "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis I2C4 (DDC) */ + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_ENABLE>; + }; + ddc_sda_pv5 { + nvidia,pins = "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis MMC1 */ + sdmmc1_cd_n_pv3 { /* CD# GPIO */ + nvidia,pins = "sdmmc1_wp_n_pv3"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk2_out_pw5 { /* D5 GPIO */ + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat3_py4 { + nvidia,pins = "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat2_py5 { + nvidia,pins = "sdmmc1_dat2_py5"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat1_py6 { + nvidia,pins = "sdmmc1_dat1_py6"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat0_py7 { + nvidia,pins = "sdmmc1_dat0_py7"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk2_req_pcc5 { /* D4 GPIO */ + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */ + nvidia,pins = "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en2_pff1 { /* D7 GPIO */ + nvidia,pins = "usb_vbus_en2_pff1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis PWM */ + ph0 { + nvidia,pins = "ph0"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph1 { + nvidia,pins = "ph1"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph2 { + nvidia,pins = "ph2"; + nvidia,function = "pwm2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* PWM3 active on pu6 being Apalis BKL1_PWM as well */ + ph3 { + nvidia,pins = "ph3"; + nvidia,function = "pwm3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis SATA1_ACT# */ + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis SD1 */ + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat3_pb4 { + nvidia,pins = "sdmmc3_dat3_pb4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat2_pb5 { + nvidia,pins = "sdmmc3_dat2_pb5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat1_pb6 { + nvidia,pins = "sdmmc3_dat1_pb6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat0_pb7 { + nvidia,pins = "sdmmc3_dat0_pb7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_cd_n_pv2 { /* CD# GPIO */ + nvidia,pins = "sdmmc3_cd_n_pv2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis SPDIF */ + spdif_out_pk5 { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis SPI1 */ + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_nxt_py2 { + nvidia,pins = "ulpi_nxt_py2"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_stp_py3 { + nvidia,pins = "ulpi_stp_py3"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis SPI2 */ + pg5 { + nvidia,pins = "pg5"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg6 { + nvidia,pins = "pg6"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg7 { + nvidia,pins = "pg7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pi3 { + nvidia,pins = "pi3"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis UART1 */ + pb1 { /* DCD GPIO */ + nvidia,pins = "pb1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pk7 { /* RI GPIO */ + nvidia,pins = "pk7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart1_txd_pu0 { + nvidia,pins = "pu0"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart1_rxd_pu1 { + nvidia,pins = "pu1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart1_cts_n_pu2 { + nvidia,pins = "pu2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart1_rts_n_pu3 { + nvidia,pins = "pu3"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_cts_n_pa1 { /* DSR GPIO */ + nvidia,pins = "uart3_cts_n_pa1"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_rts_n_pc0 { /* DTR GPIO */ + nvidia,pins = "uart3_rts_n_pc0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis UART2 */ + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis UART3 */ + uart3_txd_pw6 { + nvidia,pins = "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_rxd_pw7 { + nvidia,pins = "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis UART4 */ + uart4_rxd_pb0 { + nvidia,pins = "pb0"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart4_txd_pj7 { + nvidia,pins = "pj7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis USBH_EN */ + gen2_i2c_sda_pt6 { + nvidia,pins = "gen2_i2c_sda_pt6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis USBH_OC# */ + pbb0 { + nvidia,pins = "pbb0"; + nvidia,function = "vgp6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis USBO1_EN */ + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis USBO1_OC# */ + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis WAKE1_MICO */ + pex_wake_n_pdd3 { + nvidia,pins = "pex_wake_n_pdd3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* CORE_PWR_REQ */ + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* CPU_PWR_REQ */ + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* DVFS */ + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dvfs_clk_px2 { + nvidia,pins = "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* eMMC */ + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat1_paa1 { + nvidia,pins = "sdmmc4_dat1_paa1"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat2_paa2 { + nvidia,pins = "sdmmc4_dat2_paa2"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat3_paa3 { + nvidia,pins = "sdmmc4_dat3_paa3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat4_paa4 { + nvidia,pins = "sdmmc4_dat4_paa4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat5_paa5 { + nvidia,pins = "sdmmc4_dat5_paa5"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat6_paa6 { + nvidia,pins = "sdmmc4_dat6_paa6"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat7_paa7 { + nvidia,pins = "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* JTAG_RTCK */ + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "rtck"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* LAN_DEV_OFF# */ + ulpi_data5_po6 { + nvidia,pins = "ulpi_data5_po6"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* LAN_RESET# */ + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* LAN_WAKE# */ + ulpi_data4_po5 { + nvidia,pins = "ulpi_data4_po5"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* MCU_INT1# */ + pk2 { + nvidia,pins = "pk2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* MCU_INT2# */ + pj2 { + nvidia,pins = "pj2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* MCU_INT3# */ + pi5 { + nvidia,pins = "pi5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* MCU_INT4# */ + pj0 { + nvidia,pins = "pj0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* MCU_RESET */ + pbb6 { + nvidia,pins = "pbb6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* MCU SPI */ + gpio_x4_aud_px4 { + nvidia,pins = "gpio_x4_aud_px4"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x5_aud_px5 { + nvidia,pins = "gpio_x5_aud_px5"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x6_aud_px6 { /* MCU_CS */ + nvidia,pins = "gpio_x6_aud_px6"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x7_aud_px7 { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_w2_aud_pw2 { /* MCU_CSEZP */ + nvidia,pins = "gpio_w2_aud_pw2"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* PMIC_CLK_32K */ + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* PMIC_CPU_OC_INT */ + clk_32k_out_pa0 { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* PWR_I2C */ + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pwr_i2c_sda_pz7 { + nvidia,pins = "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* PWR_INT_N */ + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* RESET_MOCI_CTRL */ + pu4 { + nvidia,pins = "pu4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* RESET_OUT_N */ + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* SHIFT_CTRL_DIR_IN */ + kb_row0_pr0 { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row1_pr1 { + nvidia,pins = "kb_row1_pr1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Configure level-shifter as output for HDA */ + kb_row11_ps3 { + nvidia,pins = "kb_row11_ps3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* SHIFT_CTRL_DIR_OUT */ + kb_col5_pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col6_pq6 { + nvidia,pins = "kb_col6_pq6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col7_pq7 { + nvidia,pins = "kb_col7_pq7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* SHIFT_CTRL_OE */ + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col1_pq1 { + nvidia,pins = "kb_col1_pq1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col2_pq2 { + nvidia,pins = "kb_col2_pq2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col4_pq4 { + nvidia,pins = "kb_col4_pq4"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row2_pr2 { + nvidia,pins = "kb_row2_pr2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* GPIO_PI6 aka TMP451 ALERT#/THERM2# */ + pi6 { + nvidia,pins = "pi6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* TOUCH_INT */ + gpio_w3_aud_pw3 { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + pc7 { /* NC */ + nvidia,pins = "pc7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg0 { /* NC */ + nvidia,pins = "pg0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg1 { /* NC */ + nvidia,pins = "pg1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg2 { /* NC */ + nvidia,pins = "pg2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg3 { /* NC */ + nvidia,pins = "pg3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg4 { /* NC */ + nvidia,pins = "pg4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph4 { /* NC */ + nvidia,pins = "ph4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph5 { /* NC */ + nvidia,pins = "ph5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph6 { /* NC */ + nvidia,pins = "ph6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph7 { /* NC */ + nvidia,pins = "ph7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi0 { /* NC */ + nvidia,pins = "pi0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi1 { /* NC */ + nvidia,pins = "pi1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi2 { /* NC */ + nvidia,pins = "pi2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi4 { /* NC */ + nvidia,pins = "pi4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi7 { /* NC */ + nvidia,pins = "pi7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk0 { /* NC */ + nvidia,pins = "pk0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk1 { /* NC */ + nvidia,pins = "pk1"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk3 { /* NC */ + nvidia,pins = "pk3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk4 { /* NC */ + nvidia,pins = "pk4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_fs_pn0 { /* NC */ + nvidia,pins = "dap1_fs_pn0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_din_pn1 { /* NC */ + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_sclk_pn3 { /* NC */ + nvidia,pins = "dap1_sclk_pn3"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data7_po0 { /* NC */ + nvidia,pins = "ulpi_data7_po0"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data0_po1 { /* NC */ + nvidia,pins = "ulpi_data0_po1"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data1_po2 { /* NC */ + nvidia,pins = "ulpi_data1_po2"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data2_po3 { /* NC */ + nvidia,pins = "ulpi_data2_po3"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data3_po4 { /* NC */ + nvidia,pins = "ulpi_data3_po4"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data6_po7 { /* NC */ + nvidia,pins = "ulpi_data6_po7"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_fs_pp4 { /* NC */ + nvidia,pins = "dap4_fs_pp4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_din_pp5 { /* NC */ + nvidia,pins = "dap4_din_pp5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_dout_pp6 { /* NC */ + nvidia,pins = "dap4_dout_pp6"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_sclk_pp7 { /* NC */ + nvidia,pins = "dap4_sclk_pp7"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col3_pq3 { /* NC */ + nvidia,pins = "kb_col3_pq3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row3_pr3 { /* NC */ + nvidia,pins = "kb_row3_pr3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row4_pr4 { /* NC */ + nvidia,pins = "kb_row4_pr4"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row5_pr5 { /* NC */ + nvidia,pins = "kb_row5_pr5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row6_pr6 { /* NC */ + nvidia,pins = "kb_row6_pr6"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row7_pr7 { /* NC */ + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row8_ps0 { /* NC */ + nvidia,pins = "kb_row8_ps0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row9_ps1 { /* NC */ + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row12_ps4 { /* NC */ + nvidia,pins = "kb_row12_ps4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row13_ps5 { /* NC */ + nvidia,pins = "kb_row13_ps5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row14_ps6 { /* NC */ + nvidia,pins = "kb_row14_ps6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row15_ps7 { /* NC */ + nvidia,pins = "kb_row15_ps7"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row16_pt0 { /* NC */ + nvidia,pins = "kb_row16_pt0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row17_pt1 { /* NC */ + nvidia,pins = "kb_row17_pt1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu5 { /* NC */ + nvidia,pins = "pu5"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* + * PCB Version Indication: V1.2 and later have GPIO_PV0 + * wired to GND, was NC before + */ + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pv1 { /* NC */ + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x1_aud_px1 { /* NC */ + nvidia,pins = "gpio_x1_aud_px1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x3_aud_px3 { /* NC */ + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb7 { /* NC */ + nvidia,pins = "pbb7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pcc1 { /* NC */ + nvidia,pins = "pcc1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pcc2 { /* NC */ + nvidia,pins = "pcc2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_req_pee1 { /* NC */ + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap_mclk1_req_pee2 { /* NC */ + nvidia,pins = "dap_mclk1_req_pee2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* + * Leave SDMMC3_CLK_LB_OUT muxed as SDMMC3 with output + * driver enabled aka not tristated and input driver + * enabled as well as it features some magic properties + * even though the external loopback is disabled and the + * internal loopback used as per + * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 + * bits being set to 0xfffd according to the TRM! + */ + sdmmc3_clk_lb_out_pee4 { /* NC */ + nvidia,pins = "sdmmc3_clk_lb_out_pee4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + }; + }; + + serial@70006040 { + compatible = "nvidia,tegra124-hsuart"; + }; + + serial@70006200 { + compatible = "nvidia,tegra124-hsuart"; + }; + + serial@70006300 { + compatible = "nvidia,tegra124-hsuart"; + }; + + hdmi_ddc: i2c@7000c700 { + clock-frequency = <10000>; + }; + + /* PWR_I2C: power I2C to audio codec, PMIC and temperature sensor */ + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + /* SGTL5000 audio codec */ + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_3v3>; + VDDIO-supply = <&vddio_1v8>; + clocks = <&tegra_car TEGRA124_CLK_EXTERN1>; + }; + + pmic: pmic@40 { + compatible = "ams,as3722"; + reg = <0x40>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + ams,system-power-controller; + #interrupt-cells = <2>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&as3722_default>; + + as3722_default: pinmux { + gpio2_7 { + pins = "gpio2", /* PWR_EN_+V3.3 */ + "gpio7"; /* +V1.6_LPO */ + function = "gpio"; + bias-pull-up; + }; + + gpio0_1_3_4_5_6 { + pins = "gpio0", "gpio1", "gpio3", + "gpio4", "gpio5", "gpio6"; + bias-high-impedance; + }; + }; + + regulators { + vsup-sd2-supply = <®_3v3>; + vsup-sd3-supply = <®_3v3>; + vsup-sd4-supply = <®_3v3>; + vsup-sd5-supply = <®_3v3>; + vin-ldo0-supply = <&vddio_ddr_1v35>; + vin-ldo1-6-supply = <®_3v3>; + vin-ldo2-5-7-supply = <&vddio_1v8>; + vin-ldo3-4-supply = <®_3v3>; + vin-ldo9-10-supply = <®_3v3>; + vin-ldo11-supply = <®_3v3>; + + vdd_cpu: sd0 { + regulator-name = "+VDD_CPU_AP"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-always-on; + regulator-boot-on; + ams,ext-control = <2>; + }; + + sd1 { + regulator-name = "+VDD_CORE"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-min-microamp = <2500000>; + regulator-max-microamp = <4000000>; + regulator-always-on; + regulator-boot-on; + ams,ext-control = <1>; + }; + + vddio_ddr_1v35: sd2 { + regulator-name = + "+V1.35_VDDIO_DDR(sd2)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + sd3 { + regulator-name = + "+V1.35_VDDIO_DDR(sd3)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v05: sd4 { + regulator-name = "+V1.05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + vddio_1v8: sd5 { + regulator-name = "+V1.8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_gpu: sd6 { + regulator-name = "+VDD_GPU_AP"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <1200000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-boot-on; + regulator-always-on; + }; + + avdd_1v05: ldo0 { + regulator-name = "+V1.05_AVDD"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + regulator-always-on; + ams,ext-control = <1>; + }; + + vddio_sdmmc1: ldo1 { + regulator-name = "VDDIO_SDMMC1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2 { + regulator-name = "+V1.2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3 { + regulator-name = "+V1.05_RTC"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + ams,enable-tracking; + }; + + /* 1.8V for LVDS, 3.3V for eDP */ + ldo4 { + regulator-name = "AVDD_LVDS0_PLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + /* LDO5 not used */ + + vddio_sdmmc3: ldo6 { + regulator-name = "VDDIO_SDMMC3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + /* LDO7 not used */ + + ldo9 { + regulator-name = "+V3.3_ETH(ldo9)"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo10 { + regulator-name = "+V3.3_ETH(ldo10)"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo11 { + regulator-name = "+V1.8_VPP_FUSE"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + + /* + * TMP451 temperature sensor + * Note: THERM_N directly connected to AS3722 PMIC THERM + */ + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; + }; + }; + + /* SPI2: MCU SPI */ + spi@7000d600 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <500>; + nvidia,cpu-pwr-off-time = <300>; + nvidia,core-pwr-good-time = <641 3845>; + nvidia,core-pwr-off-time = <61036>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + + /* Set power_off bit in ResetControl register of AS3722 PMIC */ + i2c-thermtrip { + nvidia,i2c-controller-id = <4>; + nvidia,bus-addr = <0x40>; + nvidia,reg-addr = <0x36>; + nvidia,reg-data = <0x2>; + }; + }; + + sata@70020000 { + phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>; + phy-names = "sata-0"; + avdd-supply = <&vdd_1v05>; + hvdd-supply = <®_3v3>; + vddio-supply = <&vdd_1v05>; + }; + + usb@70090000 { + /* USBO1, USBO1 (SS), USBH2, USBH4 and USBH4 (SS) */ + phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>, + <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, + <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; + phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0"; + avddio-pex-supply = <&vdd_1v05>; + avdd-pll-erefe-supply = <&avdd_1v05>; + avdd-pll-utmip-supply = <&vddio_1v8>; + avdd-usb-ss-pll-supply = <&vdd_1v05>; + avdd-usb-supply = <®_3v3>; + dvddio-pex-supply = <&vdd_1v05>; + hvdd-usb-ss-pll-e-supply = <®_3v3>; + hvdd-usb-ss-supply = <®_3v3>; + }; + + padctl@7009f000 { + pads { + usb2 { + status = "okay"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + pcie { + status = "okay"; + + lanes { + pcie-0 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + + pcie-1 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + + pcie-2 { + nvidia,function = "pcie"; + status = "okay"; + }; + + pcie-3 { + nvidia,function = "pcie"; + status = "okay"; + }; + + pcie-4 { + nvidia,function = "pcie"; + status = "okay"; + }; + }; + }; + + sata { + status = "okay"; + + lanes { + sata-0 { + nvidia,function = "sata"; + status = "okay"; + }; + }; + }; + }; + + ports { + /* USBO1 */ + usb2-0 { + status = "okay"; + mode = "otg"; + + vbus-supply = <®_usbo1_vbus>; + }; + + /* USBH2 */ + usb2-1 { + status = "okay"; + mode = "host"; + + vbus-supply = <®_usbh_vbus>; + }; + + /* USBH4 */ + usb2-2 { + status = "okay"; + mode = "host"; + + vbus-supply = <®_usbh_vbus>; + }; + + usb3-0 { + nvidia,usb2-companion = <2>; + status = "okay"; + }; + + usb3-1 { + nvidia,usb2-companion = <0>; + status = "okay"; + }; + }; + }; + + /* eMMC */ + sdhci@700b0600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + /* CPU DFLL clock */ + clock@70110000 { + status = "okay"; + vdd-cpu-supply = <&vdd_cpu>; + nvidia,i2c-fs-rate = <400000>; + }; + + ahub@70300000 { + i2s@70301200 { + status = "okay"; + }; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + cpus { + cpu@0 { + vdd-cpu-supply = <&vdd_cpu>; + }; + }; + + reg_1v05_avdd_hdmi_pll: regulator-1v05-avdd-hdmi-pll { + compatible = "regulator-fixed"; + regulator-name = "+V1.05_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05>; + }; + + reg_3v3_mxm: regulator-3v3-mxm { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_MXM"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + /* PWR_EN_+V3.3 */ + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_3v3_mxm>; + }; + + reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AVDD_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_1v05>; + }; + + sound { + compatible = "toradex,tegra-audio-sgtl5000-apalis_tk1", + "nvidia,tegra-audio-sgtl5000"; + nvidia,model = "Toradex Apalis TK1"; + nvidia,audio-routing = + "Headphone Jack", "HP_OUT", + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack"; + nvidia,i2s-controller = <&tegra_i2s2>; + nvidia,audio-codec = <&sgtl5000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_A>, + <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; + + thermal-zones { + cpu { + trips { + cpu-shutdown-trip { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + mem { + trips { + mem-shutdown-trip { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpu { + trips { + gpu-shutdown-trip { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&gpio { + /* I210 Gigabit Ethernet Controller Reset */ + lan_reset_n { + gpio-hog; + gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LAN_RESET_N"; + }; + + /* Control MXM3 pin 26 Reset Module Output Carrier Input */ + reset_moci_ctrl { + gpio-hog; + gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "RESET_MOCI_CTRL"; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi index 5d9b18ef5af65..65a2161b9b8ee 100644 --- a/arch/arm/boot/dts/tegra124-apalis.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -1,5 +1,5 @@ /* - * Copyright 2016 Toradex AG + * Copyright 2016-2018 Toradex AG * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -56,7 +56,6 @@ pcie@1003000 { status = "okay"; - avddio-pex-supply = <&vdd_1v05>; avdd-pex-pll-supply = <&vdd_1v05>; avdd-pll-erefe-supply = <&avdd_1v05>; @@ -85,7 +84,6 @@ hdmi@54280000 { pll-supply = <®_1v05_avdd_hdmi_pll>; vdd-supply = <®_3v3_avdd_hdmi>; - nvidia,ddc-i2c-bus = <&hdmi_ddc>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; @@ -453,12 +451,12 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - /* PWM3 active on pu6 being Apalis BKL1_PWM */ + /* PWM3 active on pu6 being Apalis BKL1_PWM as well */ ph3 { nvidia,pins = "ph3"; - nvidia,function = "gmi"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,function = "pwm3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; @@ -1579,7 +1577,7 @@ }; hdmi_ddc: i2c@7000c400 { - clock-frequency = <100000>; + clock-frequency = <10000>; }; /* PWR_I2C: power I2C to audio codec, PMIC and temperature sensor */ @@ -1600,15 +1598,11 @@ compatible = "ams,as3722"; reg = <0x40>; interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; - ams,system-power-controller; - #interrupt-cells = <2>; interrupt-controller; - gpio-controller; #gpio-cells = <2>; - pinctrl-names = "default"; pinctrl-0 = <&as3722_default>; @@ -1620,9 +1614,9 @@ bias-pull-up; }; - gpio1_3_4_5_6 { - pins = "gpio1", "gpio3", "gpio4", - "gpio5", "gpio6"; + gpio0_1_3_4_5_6 { + pins = "gpio0", "gpio1", "gpio3", + "gpio4", "gpio5", "gpio6"; bias-high-impedance; }; }; @@ -1783,7 +1777,6 @@ reg = <0x4c>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; - #thermal-sensor-cells = <1>; }; }; @@ -1816,7 +1809,6 @@ sata@70020000 { phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>; phy-names = "sata-0"; - avdd-supply = <&vdd_1v05>; hvdd-supply = <®_3v3>; vddio-supply = <&vdd_1v05>; @@ -1830,7 +1822,6 @@ <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0"; - avddio-pex-supply = <&vdd_1v05>; avdd-pll-erefe-supply = <&avdd_1v05>; avdd-pll-utmip-supply = <&vddio_1v8>; @@ -2041,53 +2032,50 @@ thermal-zones { cpu { trips { - trip@0 { + cpu-shutdown-trip { temperature = <101000>; hysteresis = <0>; type = "critical"; }; }; - - cooling-maps { - /* - * There are currently no cooling maps because - * there are no cooling devices - */ - }; }; mem { trips { - trip@0 { + mem-shutdown-trip { temperature = <101000>; hysteresis = <0>; type = "critical"; }; }; - - cooling-maps { - /* - * There are currently no cooling maps because - * there are no cooling devices - */ - }; }; gpu { trips { - trip@0 { + gpu-shutdown-trip { temperature = <101000>; hysteresis = <0>; type = "critical"; }; }; - - cooling-maps { - /* - * There are currently no cooling maps because - * there are no cooling devices - */ - }; }; }; }; + +&gpio { + /* I210 Gigabit Ethernet Controller Reset */ + lan_reset_n { + gpio-hog; + gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LAN_RESET_N"; + }; + + /* Control MXM3 pin 26 Reset Module Output Carrier Input */ + reset_moci_ctrl { + gpio-hog; + gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "RESET_MOCI_CTRL"; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index d112f85e66ed5..6dbcf84dafbc1 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1418,7 +1418,7 @@ compatible = "realtek,rt5639"; reg = <0x1c>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>; realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 32d9079f025bf..89bcc178994df 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -613,7 +613,7 @@ compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>; }; }; @@ -859,7 +859,7 @@ reg = <0x9>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(J, 0) - GPIO_ACTIVE_HIGH>; + IRQ_TYPE_EDGE_BOTH>; ti,ac-detect-gpios = <&gpio TEGRA_GPIO(J, 0) GPIO_ACTIVE_HIGH>; @@ -956,11 +956,6 @@ nvidia,function = "usb3-ss"; status = "okay"; }; - - pcie-1 { - nvidia,function = "usb3-ss"; - status = "okay"; - }; }; }; }; diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index 813ae34edd6a3..5c202b3e3bb1d 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -213,21 +213,27 @@ GPIO_ACTIVE_HIGH>; }; + /* + * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier + * board) + */ i2c@7000c000 { clock-frequency = <400000>; }; + /* DDC_SCL/SDA on X3 pin 15/16 (e.g. display EDID) */ i2c_ddc: i2c@7000c400 { - clock-frequency = <100000>; + clock-frequency = <10000>; }; - i2c@7000c500 { - clock-frequency = <400000>; - }; + /* GEN2_I2C: unused */ + /* CAM/GEN3_I2C: used as EXT_IO1/2 GPIOs on SODIMM pin 133/127 */ + + /* PWR_I2C: power I2C to PMIC and temperature sensor (On-module) */ i2c@7000d000 { status = "okay"; - clock-frequency = <400000>; + clock-frequency = <100000>; pmic: tps6586x@34 { compatible = "ti,tps6586x"; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 864a95872b8db..0a7136462a1a6 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -17,7 +17,7 @@ #size-cells = <1>; ranges = <0 0x40000000 0x40000>; - vde_pool: vde { + vde_pool: vde@400 { reg = <0x400 0x3fc00>; pool; }; @@ -741,7 +741,7 @@ phy_type = "ulpi"; clocks = <&tegra_car TEGRA20_CLK_USB2>, <&tegra_car TEGRA20_CLK_PLL_U>, - <&tegra_car TEGRA20_CLK_CDEV2>; + <&tegra_car TEGRA20_CLK_PLL_P_OUT4>; clock-names = "reg", "pll_u", "ulpi-link"; resets = <&tegra_car 58>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts index 07b945b0391a3..0dc85a20bd453 100644 --- a/arch/arm/boot/dts/tegra30-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts @@ -79,7 +79,7 @@ */ i2c@7000c000 { status = "okay"; - clock-frequency = <100000>; + clock-frequency = <400000>; pcie-switch@58 { compatible = "plx,pex8605"; @@ -88,7 +88,7 @@ /* M41T0M6 real time clock on carrier board */ rtc@68 { - compatible = "st,m41t00"; + compatible = "st,m41t0"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index faa8cd2914e8b..d1d21ec2a8449 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -437,7 +437,7 @@ }; hdmiddc: i2c@7000c700 { - clock-frequency = <100000>; + clock-frequency = <10000>; }; /* @@ -597,7 +597,6 @@ stmpe_touchscreen@0 { compatible = "st,stmpe-ts"; - reg = <0>; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; /* 8 sample average control */ @@ -657,7 +656,7 @@ reg = <1>; clocks = <&clk16m>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_LOW>; + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_RISING>; spi-max-frequency = <10000000>; }; }; @@ -672,7 +671,7 @@ reg = <0>; clocks = <&clk16m>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; + interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_RISING>; spi-max-frequency = <10000000>; }; }; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 5331a8f7dcf89..ae52a5039506a 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -260,14 +260,14 @@ }; sdmmc3_dat6_pd3 { nvidia,pins = "sdmmc3_dat6_pd3"; - nvidia,function = "rsvd1"; + nvidia,function = "spdif"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc3_dat7_pd4 { nvidia,pins = "sdmmc3_dat7_pd4"; - nvidia,function = "rsvd1"; + nvidia,function = "spdif"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -281,14 +281,14 @@ }; vi_vsync_pd6 { nvidia,pins = "vi_vsync_pd6"; - nvidia,function = "rsvd1"; + nvidia,function = "ddr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; vi_hsync_pd7 { nvidia,pins = "vi_hsync_pd7"; - nvidia,function = "rsvd1"; + nvidia,function = "ddr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -806,7 +806,7 @@ }; hdmi_int_pn7 { nvidia,pins = "hdmi_int_pn7"; - nvidia,function = "rsvd1"; + nvidia,function = "hdmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -841,7 +841,7 @@ }; ulpi_data3_po4 { nvidia,pins = "ulpi_data3_po4"; - nvidia,function = "rsvd1"; + nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -1107,21 +1107,21 @@ }; vi_d10_pt2 { nvidia,pins = "vi_d10_pt2"; - nvidia,function = "rsvd1"; + nvidia,function = "ddr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; vi_d11_pt3 { nvidia,pins = "vi_d11_pt3"; - nvidia,function = "rsvd1"; + nvidia,function = "ddr"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; vi_d0_pt4 { nvidia,pins = "vi_d0_pt4"; - nvidia,function = "rsvd1"; + nvidia,function = "ddr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -1151,7 +1151,7 @@ }; pu0 { nvidia,pins = "pu0"; - nvidia,function = "rsvd1"; + nvidia,function = "owr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -1172,7 +1172,7 @@ }; pu3 { nvidia,pins = "pu3"; - nvidia,function = "rsvd1"; + nvidia,function = "pwm0"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -1193,7 +1193,7 @@ }; pu6 { nvidia,pins = "pu6"; - nvidia,function = "rsvd1"; + nvidia,function = "pwm3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -1221,7 +1221,7 @@ }; pv3 { nvidia,pins = "pv3"; - nvidia,function = "rsvd1"; + nvidia,function = "clk_12m_out"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; @@ -1510,7 +1510,7 @@ }; pbb0 { nvidia,pins = "pbb0"; - nvidia,function = "rsvd1"; + nvidia,function = "i2s4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -1575,7 +1575,7 @@ }; pcc1 { nvidia,pins = "pcc1"; - nvidia,function = "rsvd1"; + nvidia,function = "i2s4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; @@ -1762,7 +1762,7 @@ compatible = "realtek,rt5640"; reg = <0x1c>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(X, 3) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_EDGE_FALLING>; realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts index 3c5fb24302120..16e1f387aa6db 100644 --- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts @@ -56,11 +56,11 @@ */ i2c@7000c000 { status = "okay"; - clock-frequency = <100000>; + clock-frequency = <400000>; /* M41T0M6 real time clock on carrier board */ rtc@68 { - compatible = "st,m41t00"; + compatible = "st,m41t0"; reg = <0x68>; }; }; @@ -79,7 +79,7 @@ reg = <0>; clocks = <&clk16m>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>; + interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_RISING>; spi-max-frequency = <10000000>; }; spidev0: spi@1 { diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 139bfa028b04a..c44d8c40c410b 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -215,7 +215,7 @@ }; hdmiddc: i2c@7000c700 { - clock-frequency = <100000>; + clock-frequency = <10000>; }; /* @@ -363,7 +363,6 @@ stmpe_touchscreen { compatible = "st,stmpe-ts"; - reg = <0>; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; /* 8 sample average control */ diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index c3e9f1e847db8..a110cf84d85fb 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -91,6 +91,19 @@ }; }; + iram@40000000 { + compatible = "mmio-sram"; + reg = <0x40000000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40000000 0x40000>; + + vde_pool: vde@400 { + reg = <0x400 0x3fc00>; + pool; + }; + }; + host1x@50000000 { compatible = "nvidia,tegra30-host1x", "simple-bus"; reg = <0x50000000 0x00024000>; @@ -358,6 +371,28 @@ */ }; + vde@6001a000 { + compatible = "nvidia,tegra30-vde", "nvidia,tegra20-vde"; + reg = <0x6001a000 0x1000 /* Syntax Engine */ + 0x6001b000 0x1000 /* Video Bitstream Engine */ + 0x6001c000 0x100 /* Macroblock Engine */ + 0x6001c200 0x100 /* Post-processing Engine */ + 0x6001c400 0x100 /* Motion Compensation Engine */ + 0x6001c600 0x100 /* Transform Engine */ + 0x6001c800 0x100 /* Pixel prediction block */ + 0x6001ca00 0x100 /* Video DMA */ + 0x6001d800 0x400>; /* Video frame controls */ + reg-names = "sxe", "bsev", "mbe", "ppe", "mce", + "tfe", "ppb", "vdma", "frameid"; + iram = <&vde_pool>; /* IRAM region */ + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */ + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */ + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */ + interrupt-names = "sync-token", "bsev", "sxe"; + clocks = <&tegra_car TEGRA30_CLK_VDE>; + resets = <&tegra_car 61>; + }; + apbmisc@70000800 { compatible = "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc"; reg = <0x70000800 0x64 /* Chip revision */ diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts index a3afd0cda42f4..21407e159bf77 100644 --- a/arch/arm/boot/dts/uniphier-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier LD4 Reference Board - * - * Copyright (C) 2015-2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier LD4 Reference Board +// +// Copyright (C) 2015-2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> /dts-v1/; #include "uniphier-ld4.dtsi" diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index 0459e84d4d8e9..37950ad2de7c8 100644 --- a/arch/arm/boot/dts/uniphier-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier LD4 SoC - * - * Copyright (C) 2015-2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier LD4 SoC +// +// Copyright (C) 2015-2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> #include <dt-bindings/gpio/uniphier-gpio.h> diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts index 811b999800ed7..a0a44a422e125 100644 --- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier LD6b Reference Board - * - * Copyright (C) 2015-2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier LD6b Reference Board +// +// Copyright (C) 2015-2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> /dts-v1/; #include "uniphier-ld6b.dtsi" @@ -67,6 +65,17 @@ status = "okay"; }; +ð { + status = "okay"; + phy-handle = <ðphy>; +}; + +&mdio { + ethphy: ethphy@0 { + reg = <0>; + }; +}; + &nand { status = "okay"; }; diff --git a/arch/arm/boot/dts/uniphier-ld6b.dtsi b/arch/arm/boot/dts/uniphier-ld6b.dtsi index 9a7b25cc8233a..4d07a94c6b341 100644 --- a/arch/arm/boot/dts/uniphier-ld6b.dtsi +++ b/arch/arm/boot/dts/uniphier-ld6b.dtsi @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier LD6b SoC - * - * Copyright (C) 2015-2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier LD6b SoC +// +// Copyright (C) 2015-2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> /* * LD6b consists of two silicon dies: D-chip and A-chip. diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi index de481c372467a..51f0e69f49fd1 100644 --- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi +++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier SoCs default pinctrl settings - * - * Copyright (C) 2015-2017 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier SoCs default pinctrl settings +// +// Copyright (C) 2015-2017 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> &pinctrl { pinctrl_aout: aout { @@ -13,6 +11,46 @@ function = "aout"; }; + pinctrl_ain1: ain1 { + groups = "ain1"; + function = "ain1"; + }; + + pinctrl_ain2: ain2 { + groups = "ain2"; + function = "ain2"; + }; + + pinctrl_ainiec1: ainiec1 { + groups = "ainiec1"; + function = "ainiec1"; + }; + + pinctrl_aout1: aout1 { + groups = "aout1"; + function = "aout1"; + }; + + pinctrl_aout2: aout2 { + groups = "aout2"; + function = "aout2"; + }; + + pinctrl_aout3: aout3 { + groups = "aout3"; + function = "aout3"; + }; + + pinctrl_aoutiec1: aoutiec1 { + groups = "aoutiec1"; + function = "aoutiec1"; + }; + + pinctrl_aoutiec2: aoutiec2 { + groups = "aoutiec2"; + function = "aoutiec2"; + }; + pinctrl_emmc: emmc { groups = "emmc", "emmc_dat8"; function = "emmc"; @@ -33,6 +71,16 @@ function = "ether_rmii"; }; + pinctrl_ether1_rgmii: ether1-rgmii { + groups = "ether1_rgmii"; + function = "ether1_rgmii"; + }; + + pinctrl_ether1_rmii: ether1-rmii { + groups = "ether1_rmii"; + function = "ether1_rmii"; + }; + pinctrl_i2c0: i2c0 { groups = "i2c0"; function = "i2c0"; diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts index 089419cee273e..db1b08935ae5a 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ace.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier Pro4 Ace Board - * - * Copyright (C) 2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier Pro4 Ace Board +// +// Copyright (C) 2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> /dts-v1/; #include "uniphier-pro4.dtsi" @@ -77,3 +75,14 @@ &usb3 { status = "okay"; }; + +ð { + status = "okay"; + phy-handle = <ðphy>; +}; + +&mdio { + ethphy: ethphy@1 { + reg = <1>; + }; +}; diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index 6a004e5cf7869..efb084983b82e 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier Pro4 Reference Board - * - * Copyright (C) 2015-2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier Pro4 Reference Board +// +// Copyright (C) 2015-2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> /dts-v1/; #include "uniphier-pro4.dtsi" @@ -75,6 +73,17 @@ status = "okay"; }; +ð { + status = "okay"; + phy-handle = <ðphy>; +}; + +&mdio { + ethphy: ethphy@0 { + reg = <0>; + }; +}; + &nand { status = "okay"; }; diff --git a/arch/arm/boot/dts/uniphier-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-pro4-sanji.dts index adef212b45b2b..dac4d6679a327 100644 --- a/arch/arm/boot/dts/uniphier-pro4-sanji.dts +++ b/arch/arm/boot/dts/uniphier-pro4-sanji.dts @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier Pro4 Sanji Board - * - * Copyright (C) 2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier Pro4 Sanji Board +// +// Copyright (C) 2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> /dts-v1/; #include "uniphier-pro4.dtsi" @@ -72,3 +70,14 @@ &usb3 { status = "okay"; }; + +ð { + status = "okay"; + phy-handle = <ðphy>; +}; + +&mdio { + ethphy: ethphy@1 { + reg = <1>; + }; +}; diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 1a29a8619856a..844124bc9c9cf 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier Pro4 SoC - * - * Copyright (C) 2015-2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier Pro4 SoC +// +// Copyright (C) 2015-2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> #include <dt-bindings/gpio/uniphier-gpio.h> @@ -366,6 +364,24 @@ }; }; + eth: ethernet@65000000 { + compatible = "socionext,uniphier-pro4-ave4"; + status = "disabled"; + reg = <0x65000000 0x8500>; + interrupts = <0 66 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ether_rgmii>; + clocks = <&sys_clk 6>; + resets = <&sys_rst 6>; + phy-mode = "rgmii"; + local-mac-address = [00 00 00 00 00 00]; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + nand: nand@68000000 { compatible = "socionext,uniphier-denali-nand-v5a"; status = "disabled"; diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index f291dd63de9c8..06c2cef91ec73 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier Pro5 SoC - * - * Copyright (C) 2015-2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier Pro5 SoC +// +// Copyright (C) 2015-2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> / { compatible = "socionext,uniphier-pro5"; diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts index 7dfae2667f506..bed26b8ed9a3d 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier PXs2 Gentil Board - * - * Copyright (C) 2015-2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier PXs2 Gentil Board +// +// Copyright (C) 2015-2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> /dts-v1/; #include "uniphier-pxs2.dtsi" @@ -34,6 +32,12 @@ device_type = "memory"; reg = <0x80000000 0x80000000>; }; + + sound { + compatible = "audio-graph-card"; + label = "UniPhier PXs2"; + dais = <&i2s_port2>; + }; }; &serial2 { @@ -50,6 +54,35 @@ }; }; +&i2s_aux { + dai-format = "i2s"; + remote-endpoint = <&wm_speaker>; +}; + &i2c2 { status = "okay"; + + wm8960@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + #sound-dai-cells = <0>; + + port@0 { + wm_speaker: endpoint { + dai-format = "i2s"; + remote-endpoint = <&i2s_aux>; + }; + }; + }; +}; + +ð { + status = "okay"; + phy-handle = <ðphy>; +}; + +&mdio { + ethphy: ethphy@1 { + reg = <1>; + }; }; diff --git a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts index 0cf615463a82f..b13d2d16ddad8 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier PXs2 Vodka Board - * - * Copyright (C) 2015-2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier PXs2 Vodka Board +// +// Copyright (C) 2015-2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> /dts-v1/; #include "uniphier-pxs2.dtsi" @@ -32,12 +30,60 @@ device_type = "memory"; reg = <0x80000000 0x80000000>; }; + + sound { + compatible = "audio-graph-card"; + label = "UniPhier PXs2"; + dais = <&spdif_port0 + &comp_spdif_port0>; + }; + + spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + + port@0 { + spdif_tx: endpoint { + remote-endpoint = <&spdif_hiecout1>; + }; + }; + }; + + comp-spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + + port@0 { + comp_spdif_tx: endpoint { + remote-endpoint = <&comp_spdif_hiecout1>; + }; + }; + }; }; &serial2 { status = "okay"; }; +&spdif_hiecout1 { + remote-endpoint = <&spdif_tx>; +}; + +&comp_spdif_hiecout1 { + remote-endpoint = <&comp_spdif_tx>; +}; + &i2c0 { status = "okay"; }; + +ð { + status = "okay"; + phy-handle = <ðphy>; +}; + +&mdio { + ethphy: ethphy@1 { + reg = <1>; + }; +}; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index c083468c17db5..debcbd15c24bf 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier PXs2 SoC - * - * Copyright (C) 2015-2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier PXs2 SoC +// +// Copyright (C) 2015-2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> #include <dt-bindings/gpio/uniphier-gpio.h> #include <dt-bindings/thermal/thermal.h> @@ -227,6 +225,61 @@ <21 217 3>; }; + audio@56000000 { + compatible = "socionext,uniphier-pxs2-aio"; + reg = <0x56000000 0x80000>; + interrupts = <0 144 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ain1>, + <&pinctrl_ain2>, + <&pinctrl_ainiec1>, + <&pinctrl_aout2>, + <&pinctrl_aout3>, + <&pinctrl_aoutiec1>, + <&pinctrl_aoutiec2>; + clock-names = "aio"; + clocks = <&sys_clk 40>; + reset-names = "aio"; + resets = <&sys_rst 40>; + #sound-dai-cells = <1>; + socionext,syscon = <&soc_glue>; + + i2s_port0: port@0 { + i2s_hdmi: endpoint { + }; + }; + + i2s_port1: port@1 { + i2s_line: endpoint { + }; + }; + + i2s_port2: port@2 { + i2s_aux: endpoint { + }; + }; + + spdif_port0: port@3 { + spdif_hiecout1: endpoint { + }; + }; + + spdif_port1: port@4 { + spdif_iecout1: endpoint { + }; + }; + + comp_spdif_port0: port@5 { + comp_spdif_hiecout1: endpoint { + }; + }; + + comp_spdif_port1: port@6 { + comp_spdif_iecout1: endpoint { + }; + }; + }; + i2c0: i2c@58780000 { compatible = "socionext,uniphier-fi2c"; status = "disabled"; @@ -366,7 +419,7 @@ }; }; - soc-glue@5f800000 { + soc_glue: soc-glue@5f800000 { compatible = "socionext,uniphier-pxs2-soc-glue", "simple-mfd", "syscon"; reg = <0x5f800000 0x2000>; @@ -446,6 +499,24 @@ }; }; + eth: ethernet@65000000 { + compatible = "socionext,uniphier-pxs2-ave4"; + status = "disabled"; + reg = <0x65000000 0x8500>; + interrupts = <0 66 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ether_rgmii>; + clocks = <&sys_clk 6>; + resets = <&sys_rst 6>; + phy-mode = "rgmii"; + local-mac-address = [00 00 00 00 00 00]; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + nand: nand@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; diff --git a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi index 7a1c29b558d5d..04e60c295319f 100644 --- a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi +++ b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier Reference Daughter Board - * - * Copyright (C) 2015-2017 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier Reference Daughter Board +// +// Copyright (C) 2015-2017 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> &i2c0 { eeprom@50 { diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts index e052ea3b40203..fe386fa2ea4be 100644 --- a/arch/arm/boot/dts/uniphier-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier sLD8 Reference Board - * - * Copyright (C) 2015-2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier sLD8 Reference Board +// +// Copyright (C) 2015-2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> /dts-v1/; #include "uniphier-sld8.dtsi" diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index bc8c24078faa1..e9b9b4f3c5581 100644 --- a/arch/arm/boot/dts/uniphier-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier sLD8 SoC - * - * Copyright (C) 2015-2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier sLD8 SoC +// +// Copyright (C) 2015-2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> #include <dt-bindings/gpio/uniphier-gpio.h> diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi index e4e7e1bb91720..bf441c2eff794 100644 --- a/arch/arm/boot/dts/uniphier-support-card.dtsi +++ b/arch/arm/boot/dts/uniphier-support-card.dtsi @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier Support Card (Expansion Board) - * - * Copyright (C) 2015-2017 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier Support Card (Expansion Board) +// +// Copyright (C) 2015-2017 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> &system_bus { status = "okay"; diff --git a/arch/arm/boot/dts/versatile-ab-ib2.dts b/arch/arm/boot/dts/versatile-ab-ib2.dts new file mode 100644 index 0000000000000..5890cb974f78d --- /dev/null +++ b/arch/arm/boot/dts/versatile-ab-ib2.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * The Versatile AB with the IB2 expansion board mounted. + * This works as a superset of the Versatile AB. + */ + +#include "versatile-ab.dts" + +/ { + model = "ARM Versatile AB + IB2 board"; + + /* Special IB2 control register */ + ib2_syscon@27000000 { + compatible = "arm,versatile-ib2-syscon", "syscon", "simple-mfd"; + reg = <0x27000000 0x4>; + + led@00.4 { + compatible = "register-bit-led"; + offset = <0x00>; + mask = <0x10>; + label = "versatile-ib2:0"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index 4a51612996bc2..5f61d36090270 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -30,6 +30,43 @@ clock-frequency = <24000000>; }; + bridge { + compatible = "ti,ths8134b", "ti,ths8134"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&clcd_pads_vga_dac>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_bridge_out>; + }; + }; + }; + core-module@10000000 { compatible = "arm,core-module-versatile", "syscon", "simple-mfd"; reg = <0x10000000 0x200>; @@ -230,7 +267,39 @@ reg = <0x10120000 0x1000>; interrupts = <16>; clocks = <&osc1>, <&pclk>; - clock-names = "clcd", "apb_pclk"; + clock-names = "clcdclk", "apb_pclk"; + /* 800x600 16bpp @ 36MHz works fine */ + max-memory-bandwidth = <54000000>; + + /* + * This port is routed through a PLD (Programmable + * Logic Device) that routes the output from the CLCD + * (after transformations) to the VGA DAC and also an + * external panel connector. The PLD is essential for + * supporting RGB565/BGR565. + * + * The signals from the port thus reaches two endpoints. + * The PLD is managed through a few special bits in the + * FPGA "sysreg". + * + * This arrangement can be clearly seen in + * ARM DUI 0225D, page 3-41, figure 3-19. + */ + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + clcd_pads_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + clcd_pads_vga_dac: endpoint@1 { + reg = <1>; + remote-endpoint = <&vga_bridge_in>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; }; sctl@101e0000 { @@ -319,8 +388,18 @@ ranges = <0 0x10000000 0x10000>; sysreg@0 { - compatible = "arm,versatile-sysreg", "syscon"; + compatible = "arm,versatile-sysreg", "syscon", "simple-mfd"; reg = <0x00000 0x1000>; + + panel: display@0 { + compatible = "arm,versatile-tft-panel"; + + port { + panel_in: endpoint { + remote-endpoint = <&clcd_pads_panel>; + }; + }; + }; }; aaci@4000 { diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi index 515c4d2f28b0d..2e7e3cebba1ca 100644 --- a/arch/arm/boot/dts/vf500-colibri.dtsi +++ b/arch/arm/boot/dts/vf500-colibri.dtsi @@ -46,7 +46,7 @@ model = "Toradex Colibri VF50 COM"; compatible = "toradex,vf610-colibri_vf50", "fsl,vf500"; - memory { + memory@80000000 { reg = <0x80000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi index 348bcd30c0f7d..bbff0115e2fb9 100644 --- a/arch/arm/boot/dts/vf500.dtsi +++ b/arch/arm/boot/dts/vf500.dtsi @@ -39,11 +39,16 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" #include "vfxxx.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> / { + #address-cells = <1>; + #size-cells = <1>; + chosen { }; + aliases { }; + memory { device_type = "memory"; }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi index 395812c529330..aeaf99f1f0fcd 100644 --- a/arch/arm/boot/dts/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -46,7 +46,7 @@ model = "Toradex Colibri VF61 COM"; compatible = "toradex,vf610-colibri_vf61", "fsl,vf610"; - memory { + memory@80000000 { reg = <0x80000000 0x10000000>; }; }; diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts index 5447f25946599..a3014e8d97a9f 100644 --- a/arch/arm/boot/dts/vf610-cosmic.dts +++ b/arch/arm/boot/dts/vf610-cosmic.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyLP1,115200"; }; - memory { + memory@80000000 { reg = <0x80000000 0x10000000>; }; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 6f787e67bd2ea..6be7a828ae64e 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -50,7 +50,7 @@ bootargs = "console=ttyLP1,115200"; }; - memory { + memory@80000000 { reg = <0x80000000 0x8000000>; }; diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi index aadd36db0092d..4890b8a5aa445 100644 --- a/arch/arm/boot/dts/vf610-zii-dev.dtsi +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi @@ -49,7 +49,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { reg = <0x80000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/vf610m4-colibri.dts index 7198e8cceb0dd..41ec66a969907 100644 --- a/arch/arm/boot/dts/vf610m4-colibri.dts +++ b/arch/arm/boot/dts/vf610m4-colibri.dts @@ -51,10 +51,10 @@ chosen { bootargs = "console=ttyLP2,115200 clk_ignore_unused init=/linuxrc rw"; - linux,stdout-path = "&uart2"; + stdout-path = "&uart2"; }; - memory { + memory@8c000000 { reg = <0x8c000000 0x3000000>; }; }; diff --git a/arch/arm/boot/dts/vf610m4.dtsi b/arch/arm/boot/dts/vf610m4.dtsi index 1474bd34d0f1b..8293276b55a64 100644 --- a/arch/arm/boot/dts/vf610m4.dtsi +++ b/arch/arm/boot/dts/vf610m4.dtsi @@ -42,10 +42,17 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" #include "armv7-m.dtsi" #include "vfxxx.dtsi" +/ { + #address-cells = <1>; + #size-cells = <1>; + chosen { }; + aliases { }; + memory { device_type = "memory"; }; +}; + &mscm_ir { interrupt-parent = <&nvic>; }; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 0f79fe1ccd9d9..e22507e233032 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -1,14 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2011 - 2014 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * Copyright (C) 2011 - 2014 Xilinx */ / { diff --git a/arch/arm/boot/dts/zynq-cc108.dts b/arch/arm/boot/dts/zynq-cc108.dts new file mode 100644 index 0000000000000..1a0f631c1d8de --- /dev/null +++ b/arch/arm/boot/dts/zynq-cc108.dts @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Xilinx CC108 board DTS + * + * (C) Copyright 2007-2018 Xilinx, Inc. + * (C) Copyright 2007-2013 Michal Simek + * (C) Copyright 2007-2012 PetaLogix Qld Pty Ltd + * + * Michal SIMEK <monstr@monstr.eu> + */ +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + compatible = "xlnx,zynq-cc108", "xlnx,zynq-7000"; + model = "Xilinx Zynq"; + + aliases { + ethernet0 = &gem0; + serial0 = &uart0; + }; + + chosen { + bootargs = ""; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x20000000>; + }; + + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + + usb_phy1: phy1 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; +}; + +&sdhci1 { + status = "okay"; + broken-cd ; + wp-inverted ; +}; + +&uart0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy1>; +}; diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts index b9376a4904b45..aa4a0b6defb84 100644 --- a/arch/arm/boot/dts/zynq-microzed.dts +++ b/arch/arm/boot/dts/zynq-microzed.dts @@ -1,15 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2016 Jagan Teki <jteki@openedev.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; /include/ "zynq-7000.dtsi" @@ -23,7 +15,7 @@ serial0 = &uart1; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x40000000>; }; diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts index 0144acfa97936..c05f4b67d4c11 100644 --- a/arch/arm/boot/dts/zynq-parallella.dts +++ b/arch/arm/boot/dts/zynq-parallella.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2014 SUSE LINUX Products GmbH * @@ -6,15 +7,6 @@ * Copyright (C) 2011 Xilinx * Copyright (C) 2012 National Instruments Corp. * Copyright (C) 2013 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; /include/ "zynq-7000.dtsi" diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 70a5de76b7db3..f2330b0cb63d3 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -1,15 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; #include "zynq-7000.dtsi" @@ -112,7 +104,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0_default>; - i2cswitch@74 { + i2c-mux@74 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index cdc326ec33358..3ad1260ff2a18 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -1,15 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; #include "zynq-7000.dtsi" @@ -68,7 +60,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0_default>; - i2cswitch@74 { + i2c-mux@74 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts new file mode 100644 index 0000000000000..6884f1ad66b77 --- /dev/null +++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Xilinx ZC770 XM010 board DTS + * + * Copyright (C) 2013-2018 Xilinx, Inc. + */ +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000"; + model = "Xilinx Zynq"; + + aliases { + ethernet0 = &gem0; + i2c0 = &i2c0; + serial0 = &uart1; + spi1 = &spi1; + }; + + chosen { + bootargs = ""; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&can0 { + status = "okay"; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; + device_type = "ethernet-phy"; + }; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + eeprom: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + }; + +}; + +&sdhci0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; + flash@0 { + compatible = "sst25wf080", "jedec,spi-nor"; + reg = <1>; + spi-max-frequency = <1000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "data"; + reg = <0x0 0x100000>; + }; + }; + }; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; +}; diff --git a/arch/arm/boot/dts/zynq-zc770-xm011.dts b/arch/arm/boot/dts/zynq-zc770-xm011.dts new file mode 100644 index 0000000000000..b78883cee96ab --- /dev/null +++ b/arch/arm/boot/dts/zynq-zc770-xm011.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Xilinx ZC770 XM013 board DTS + * + * Copyright (C) 2013-2018 Xilinx, Inc. + */ +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000"; + model = "Xilinx Zynq"; + + aliases { + i2c0 = &i2c1; + serial0 = &uart1; + spi0 = &spi0; + }; + + chosen { + bootargs = ""; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + usb_phy1: phy1 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&can0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + eeprom: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + }; +}; + +&spi0 { + status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; +}; + +&uart1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy1>; +}; diff --git a/arch/arm/boot/dts/zynq-zc770-xm012.dts b/arch/arm/boot/dts/zynq-zc770-xm012.dts new file mode 100644 index 0000000000000..c3169d63600d1 --- /dev/null +++ b/arch/arm/boot/dts/zynq-zc770-xm012.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Xilinx ZC770 XM012 board DTS + * + * Copyright (C) 2013-2018 Xilinx, Inc. + */ +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000"; + model = "Xilinx Zynq"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + serial0 = &uart1; + spi0 = &spi1; + }; + + chosen { + bootargs = ""; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; +}; + +&can1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + eeprom0: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + eeprom1: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + }; +}; + +&spi1 { + status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts new file mode 100644 index 0000000000000..8bb66859d7743 --- /dev/null +++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Xilinx ZC770 XM013 board DTS + * + * Copyright (C) 2013 Xilinx, Inc. + */ +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000"; + model = "Xilinx Zynq"; + + aliases { + ethernet0 = &gem1; + i2c0 = &i2c1; + serial0 = &uart0; + spi1 = &spi0; + }; + + chosen { + bootargs = ""; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; +}; + +&can1 { + status = "okay"; +}; + +&gem1 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@7 { + reg = <7>; + device_type = "ethernet-phy"; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + si570: clock-generator@55 { + #clock-cells = <0>; + compatible = "silabs,si570"; + temperature-stability = <50>; + reg = <0x55>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; +}; + +&spi0 { + status = "okay"; + num-cs = <4>; + is-decoded-cs = <0>; + eeprom: eeprom@0 { + at25,byte-len = <8192>; + at25,addr-mode = <2>; + at25,page-size = <32>; + + compatible = "atmel,at25"; + reg = <2>; + spi-max-frequency = <1000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index 5e44dc12fd60a..53c6883ce1f69 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -1,15 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; #include "zynq-7000.dtsi" diff --git a/arch/arm/boot/dts/zynq-zybo-z7.dts b/arch/arm/boot/dts/zynq-zybo-z7.dts new file mode 100644 index 0000000000000..1e713dc98920d --- /dev/null +++ b/arch/arm/boot/dts/zynq-zybo-z7.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + model = "Zynq ZYBO Z7 Development Board"; + compatible = "digilent,zynq-zybo-z7", "xlnx,zynq-7000"; + + aliases { + ethernet0 = &gem0; + serial0 = &uart1; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x20000000>; + }; + + chosen { + bootargs = ""; + stdout-path = "serial0:115200n8"; + }; + + usb_phy0: phy0 { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio0 46 1>; + }; +}; + +&clkc { + ps-clk-frequency = <33333333>; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + reg = <0>; + device_type = "ethernet-phy"; + }; +}; + +&sdhci0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; +}; diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts index e40cafc5ee5b6..a6c00e7fa767c 100644 --- a/arch/arm/boot/dts/zynq-zybo.dts +++ b/arch/arm/boot/dts/zynq-zybo.dts @@ -1,15 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ /dts-v1/; #include "zynq-7000.dtsi" diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index da7387689b88f..28f1d714e5b9f 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -751,6 +751,7 @@ CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SH_MMCIF=y CONFIG_MMC_SUNXI=y CONFIG_MMC_BCM2835=y +CONFIG_MMC_SDHCI_OMAP=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_CLASS_FLASH=m diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 92674f247a12a..bce7e5abcc05a 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -431,8 +431,11 @@ CONFIG_USB_ZERO=m CONFIG_USB_G_NOKIA=m CONFIG_MMC=y CONFIG_SDIO_UART=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y +CONFIG_MMC_SDHCI_OMAP=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m CONFIG_LEDS_CPCAP=m diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index fbedbd8f619a7..2b1535cdeb7cc 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -190,12 +190,24 @@ config ARCH_R8A7796 help This enables support for the Renesas R-Car M3-W SoC. +config ARCH_R8A77965 + bool "Renesas R-Car M3-N SoC Platform" + depends on ARCH_RENESAS + help + This enables support for the Renesas R-Car M3-N SoC. + config ARCH_R8A77970 bool "Renesas R-Car V3M SoC Platform" depends on ARCH_RENESAS help This enables support for the Renesas R-Car V3M SoC. +config ARCH_R8A77980 + bool "Renesas R-Car V3H SoC Platform" + depends on ARCH_RENESAS + help + This enables support for the Renesas R-Car V3H SoC. + config ARCH_R8A77995 bool "Renesas R-Car D3 SoC Platform" depends on ARCH_RENESAS diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index f505227b02508..8bebe7da5ed9a 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -5,8 +5,11 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index a6975670cd1c2..2250dec9974c7 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -120,8 +120,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; disable-wp; bus-width = <4>; status = "okay"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts index 2beef9e6cb885..e2dce48fa29a0 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts @@ -82,8 +82,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; disable-wp; bus-width = <4>; status = "okay"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts index 8807664f363a0..3b3081b10ecbe 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts @@ -68,8 +68,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; disable-wp; bus-width = <4>; status = "okay"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index 240d35731d10c..bf42690a3361e 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -67,8 +67,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index 604cdaedac38e..a75825798a717 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -103,8 +103,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; disable-wp; bus-width = <4>; status = "okay"; @@ -230,6 +229,11 @@ regulator-name = "vcc-rtc"; }; +/* On Euler connector */ +&spdif { + status = "disabled"; +}; + /* On Exp and Euler connectors */ &uart0 { pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts new file mode 100644 index 0000000000000..d9baab3dc96bd --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -0,0 +1,265 @@ +/* + * Copyright (C) Harald Geyer <harald@ccbib.org> + * based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com> + * + * SPDX-License-Identifier: (GPL-2.0 OR MIT) + */ + +/dts-v1/; + +#include "sun50i-a64.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Olimex A64 Teres-I"; + compatible = "olimex,a64-teres-i", "allwinner,sun50i-a64"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + + framebuffer-lcd { + eDP25-supply = <®_dldo2>; + eDP12-supply = <®_dldo3>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + lid-switch { + label = "Lid Switch"; + gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */ + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + }; + }; + + leds { + compatible = "gpio-leds"; + + capslock { + label = "teres-i:green:capslock"; + gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */ + }; + + numlock { + label = "teres-i:green:numlock"; + gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */ + }; + }; + + reg_usb1_vbus: usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + status = "okay"; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + }; +}; + +&ehci1 { + status = "okay"; +}; + + +/* The ANX6345 eDP-bridge is on i2c0. There is no linux (mainline) + * driver for this chip at the moment, the bootloader initializes it. + * However it can be accessed with the i2c-dev driver from user space. + */ +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_dcdc1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_aldo2>; + vqmmc-supply = <®_dldo4>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8723bs: wifi@1 { + reg = <1>; + interrupt-parent = <&r_pio>; + interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp803: pmic@3a3 { + compatible = "x-powers,axp803"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; +}; + +#include "axp803.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-pe"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1040000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-ddr3"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-hdmi"; +}; + +®_dldo2 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-pd"; +}; + +®_dldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "eDP12"; +}; + +®_dldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-io"; +}; + +®_eldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "cpvdd"; +}; + +®_eldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-dvdd-csi"; +}; + +®_fldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-1v2-hsic"; +}; + +/* + * The A64 chip cannot work without this regulator off, although + * it seems to be only driving the AR100 core. + * Maybe we don't still know well about CPUs domain. + */ +®_fldo2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index d783d164b9c30..1b2ef28c42bd1 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -52,6 +52,26 @@ #address-cells = <1>; #size-cells = <1>; + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + +/* + * The pipeline mixer0-lcd0 depends on clock CLK_MIXER0 from DE2 CCU. + * However there is no support for this clock on A64 yet, so we depend + * on the upstream clocks here to keep them (and thus CLK_MIXER0) up. + */ + simplefb_lcd: framebuffer-lcd { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "mixer0-lcd0"; + clocks = <&ccu CLK_TCON0>, + <&ccu CLK_DE>, <&ccu CLK_BUS_DE>; + status = "disabled"; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -112,6 +132,24 @@ method = "smc"; }; + sound_spdif { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 @@ -291,6 +329,11 @@ interrupt-controller; #interrupt-cells = <3>; + i2c0_pins: i2c0_pins { + pins = "PH0", "PH1"; + function = "i2c0"; + }; + i2c1_pins: i2c1_pins { pins = "PH2", "PH3"; function = "i2c1"; @@ -336,6 +379,11 @@ drive-strength = <40>; }; + spdif_tx_pin: spdif { + pins = "PH8"; + function = "spdif"; + }; + spi0_pins: spi0 { pins = "PC0", "PC1", "PC2", "PC3"; function = "spi0"; @@ -382,6 +430,50 @@ }; }; + spdif: spdif@1c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun50i-a64-spdif", + "allwinner,sun8i-h3-spdif"; + reg = <0x01c21000 0x400>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; + resets = <&ccu RST_BUS_SPDIF>; + clock-names = "apb", "spdif"; + dmas = <&dma 2>; + dma-names = "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pin>; + status = "disabled"; + }; + + i2s0: i2s@1c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun50i-a64-i2s", + "allwinner,sun8i-h3-i2s"; + reg = <0x01c22000 0x400>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_I2S0>; + dma-names = "rx", "tx"; + dmas = <&dma 3>, <&dma 3>; + status = "disabled"; + }; + + i2s1: i2s@1c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun50i-a64-i2s", + "allwinner,sun8i-h3-i2s"; + reg = <0x01c22400 0x400>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_I2S1>; + dma-names = "rx", "tx"; + dmas = <&dma 4>, <&dma 4>; + status = "disabled"; + }; + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; @@ -593,5 +685,12 @@ #address-cells = <1>; #size-cells = <0>; }; + + wdt0: watchdog@1c20ca0 { + compatible = "allwinner,sun50i-a64-wdt", + "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts index 1ed9f219deaf6..506e25ba028ab 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts @@ -151,8 +151,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ @@ -160,8 +158,6 @@ }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; vmmc-supply = <®_vcc3v3>; vqmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&wifi_pwrseq>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts index f1447003ea3cb..cc268a69786c5 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts @@ -126,8 +126,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts index 9e51d3a5f4e6b..98862c7c7258e 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -67,6 +67,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -121,6 +132,10 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -153,6 +168,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -160,8 +185,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts index 0f25c4a6f15d3..b75ca4d7d0019 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts @@ -62,6 +62,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -128,6 +139,10 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -160,6 +175,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -167,8 +192,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ @@ -176,8 +199,6 @@ }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts new file mode 100644 index 0000000000000..1238de25a9691 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts @@ -0,0 +1,143 @@ +/* + * Copyright (C) 2016 ARM Ltd. + * Copyright (C) 2018 Hauke Mehrtens <hauke@hauke-m.de> + * + * SPDX-License-Identifier: (GPL-2.0+ OR X11) + */ + +/dts-v1/; +#include "sun50i-h5.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Xunlong Orange Pi Zero Plus"; + compatible = "xunlong,orangepi-zero-plus", "allwinner,sun50i-h5"; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + aliases { + ethernet0 = &emac; + ethernet1 = &rtl8189ftv; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr { + label = "orangepi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ + default-state = "on"; + }; + + status { + label = "orangepi:red:status"; + gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */ + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; + + /* + * Explicitly define the sdio device, so that we can add an ethernet + * alias for it (which e.g. makes u-boot set a mac-address). + */ + rtl8189ftv: sdio_wifi@1 { + reg = <1>; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mxicy,mx25l1606e", "winbond,w25q128"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + /* USB Type-A ports' VBUS is always on */ + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts index af43533c71342..53c8c11620e0e 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts @@ -58,6 +58,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + reg_vcc3v3: vcc3v3 { compatible = "regulator-fixed"; regulator-name = "vcc3v3"; @@ -73,9 +84,21 @@ }; }; +&de { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; @@ -83,8 +106,6 @@ }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; vmmc-supply = <®_vcc3v3>; vqmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&wifi_pwrseq>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts new file mode 100644 index 0000000000000..d36de5eb81f3f --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io> + */ + +/dts-v1/; + +#include "sun50i-h6.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Pine H64"; + compatible = "pine64,pine-h64", "allwinner,sun50i-h6"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi new file mode 100644 index 0000000000000..56563150d61a9 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -0,0 +1,175 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <1>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <3>; + enable-method = "psci"; + }; + }; + + iosc: internal-osc-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <16000000>; + clock-accuracy = <300000000>; + clock-output-names = "iosc"; + }; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ccu: clock@3001000 { + compatible = "allwinner,sun50i-h6-ccu"; + reg = <0x03001000 0x1000>; + clocks = <&osc24M>, <&osc32k>, <&iosc>; + clock-names = "hosc", "losc", "iosc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + gic: interrupt-controller@3021000 { + compatible = "arm,gic-400"; + reg = <0x03021000 0x1000>, + <0x03022000 0x2000>, + <0x03024000 0x2000>, + <0x03026000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + pio: pinctrl@300b000 { + compatible = "allwinner,sun50i-h6-pinctrl"; + reg = <0x0300b000 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 26>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + uart0_ph_pins: uart0-ph { + pins = "PH0", "PH1"; + function = "uart0"; + }; + }; + + uart0: serial@5000000 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 70>; + resets = <&ccu 21>; + status = "disabled"; + }; + + uart1: serial@5000400 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000400 0x400>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 71>; + resets = <&ccu 22>; + status = "disabled"; + }; + + uart2: serial@5000800 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000800 0x400>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 72>; + resets = <&ccu 23>; + status = "disabled"; + }; + + uart3: serial@5000c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000c00 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 73>; + resets = <&ccu 24>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 51ce5832ee1df..eaf13fe292877 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -99,4 +99,9 @@ &usb0 { status = "okay"; + disable-over-current; +}; + +&watchdog0 { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index 447b98d309216..57eedced5a516 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Amlogic, Inc. All rights reserved. - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; @@ -14,6 +13,7 @@ aliases { serial0 = &uart_AO; + serial1 = &uart_A; }; }; @@ -24,8 +24,16 @@ pinctrl-names = "default"; }; +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>; + pinctrl-names = "default"; +}; + &uart_AO { status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; }; &ir { @@ -33,3 +41,9 @@ pinctrl-0 = <&remote_input_ao_pins>; pinctrl-names = "default"; }; + +&i2c1 { + status = "okay"; + pinctrl-0 = <&i2c1_z_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 70c776ef7aa73..b58808eb3cc84 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Amlogic, Inc. All rights reserved. - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ #include <dt-bindings/gpio/gpio.h> @@ -163,18 +162,70 @@ status = "disabled"; }; + i2c0: i2c@1f000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1f000 0x0 0x20>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + clock-names = "clk_i2c"; + }; + + i2c1: i2c@1e000 { + compatible = "amlogic,meson-axg-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x1e000 0x0 0x20>; + status = "disabled"; + interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; + clock-names = "clk_i2c"; + }; + + i2c2: i2c@1d000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1d000 0x0 0x20>; + interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + clock-names = "clk_i2c"; + }; + + i2c3: i2c@1c000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1c000 0x0 0x20>; + interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + clock-names = "clk_i2c"; + }; + uart_A: serial@24000 { - compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson-gx-uart"; reg = <0x0 0x24000 0x0 0x18>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; status = "disabled"; + clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; }; uart_B: serial@23000 { - compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson-gx-uart"; reg = <0x0 0x23000 0x0 0x18>; interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; status = "disabled"; + clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; }; }; @@ -234,6 +285,13 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>; + hwrng: rng { + compatible = "amlogic,meson-rng"; + reg = <0x0 0x18 0x0 0x4>; + clocks = <&clkc CLKID_RNG0>; + clock-names = "core"; + }; + pinctrl_periphs: pinctrl@480 { compatible = "amlogic,meson-axg-periphs-pinctrl"; #address-cells = <2>; @@ -251,6 +309,36 @@ gpio-ranges = <&pinctrl_periphs 0 0 86>; }; + eth_rmii_x_pins: eth-x-rmii { + mux { + groups = "eth_mdio_x", + "eth_mdc_x", + "eth_rgmii_rx_clk_x", + "eth_rx_dv_x", + "eth_rxd0_x", + "eth_rxd1_x", + "eth_txen_x", + "eth_txd0_x", + "eth_txd1_x"; + function = "eth"; + }; + }; + + eth_rmii_y_pins: eth-y-rmii { + mux { + groups = "eth_mdio_y", + "eth_mdc_y", + "eth_rgmii_rx_clk_y", + "eth_rx_dv_y", + "eth_rxd0_y", + "eth_rxd1_y", + "eth_txen_y", + "eth_txd0_y", + "eth_txd1_y"; + function = "eth"; + }; + }; + eth_rgmii_x_pins: eth-x-rgmii { mux { groups = "eth_mdio_x", @@ -444,6 +532,134 @@ function = "spi1"; }; }; + + i2c0_pins: i2c0 { + mux { + groups = "i2c0_sck", + "i2c0_sda"; + function = "i2c0"; + }; + }; + + i2c1_z_pins: i2c1_z { + mux { + groups = "i2c1_sck_z", + "i2c1_sda_z"; + function = "i2c1"; + }; + }; + + i2c1_x_pins: i2c1_x { + mux { + groups = "i2c1_sck_x", + "i2c1_sda_x"; + function = "i2c1"; + }; + }; + + i2c2_x_pins: i2c2_x { + mux { + groups = "i2c2_sck_x", + "i2c2_sda_x"; + function = "i2c2"; + }; + }; + + i2c2_a_pins: i2c2_a { + mux { + groups = "i2c2_sck_a", + "i2c2_sda_a"; + function = "i2c2"; + }; + }; + + i2c3_a6_pins: i2c3_a6 { + mux { + groups = "i2c3_sda_a6", + "i2c3_sck_a7"; + function = "i2c3"; + }; + }; + + i2c3_a12_pins: i2c3_a12 { + mux { + groups = "i2c3_sda_a12", + "i2c3_sck_a13"; + function = "i2c3"; + }; + }; + + i2c3_a19_pins: i2c3_a19 { + mux { + groups = "i2c3_sda_a19", + "i2c3_sck_a20"; + function = "i2c3"; + }; + }; + + uart_a_pins: uart_a { + mux { + groups = "uart_tx_a", + "uart_rx_a"; + function = "uart_a"; + }; + }; + + uart_a_cts_rts_pins: uart_a_cts_rts { + mux { + groups = "uart_cts_a", + "uart_rts_a"; + function = "uart_a"; + }; + }; + + uart_b_x_pins: uart_b_x { + mux { + groups = "uart_tx_b_x", + "uart_rx_b_x"; + function = "uart_b"; + }; + }; + + uart_b_x_cts_rts_pins: uart_b_x_cts_rts { + mux { + groups = "uart_cts_b_x", + "uart_rts_b_x"; + function = "uart_b"; + }; + }; + + uart_b_z_pins: uart_b_z { + mux { + groups = "uart_tx_b_z", + "uart_rx_b_z"; + function = "uart_b"; + }; + }; + + uart_b_z_cts_rts_pins: uart_b_z_cts_rts { + mux { + groups = "uart_cts_b_z", + "uart_rts_b_z"; + function = "uart_b"; + }; + }; + + uart_ao_b_z_pins: uart_ao_b_z { + mux { + groups = "uart_ao_tx_b_z", + "uart_ao_rx_b_z"; + function = "uart_ao_b_z"; + }; + }; + + uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts { + mux { + groups = "uart_ao_cts_b_z", + "uart_ao_rts_b_z"; + function = "uart_ao_b_z"; + }; + }; }; }; @@ -494,6 +710,44 @@ function = "remote_input_ao"; }; }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_ao_tx_a", + "uart_ao_rx_a"; + function = "uart_ao_a"; + }; + }; + + uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts { + mux { + groups = "uart_ao_cts_a", + "uart_ao_rts_a"; + function = "uart_ao_a"; + }; + }; + + uart_ao_b_pins: uart_ao_b { + mux { + groups = "uart_ao_tx_b", + "uart_ao_rx_b"; + function = "uart_ao_b"; + }; + }; + + uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts { + mux { + groups = "uart_ao_cts_b", + "uart_ao_rts_b"; + function = "uart_ao_b"; + }; + }; + }; + + sec_AO: ao-secure@140 { + compatible = "amlogic,meson-gx-ao-secure", "syscon"; + reg = <0x0 0x140 0x0 0x140>; + amlogic,has-chip-id; }; pwm_AO_ab: pwm@7000 { @@ -504,12 +758,23 @@ }; pwm_AO_cd: pwm@2000 { - compatible = "amlogic,axg-ao-pwm"; + compatible = "amlogic,meson-axg-ao-pwm"; reg = <0x0 0x02000 0x0 0x20>; #pwm-cells = <3>; status = "disabled"; }; + i2c_AO: i2c@5000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x05000 0x0 0x20>; + interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + clock-names = "clk_i2c"; + }; + uart_AO: serial@3000 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x3000 0x0 0x18>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index aeb6d21a3beca..4eef36b225386 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Endless Computers, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /* Common DTSI for same Amlogic Q200/Q201 and P230/P231 boards using either @@ -48,6 +11,7 @@ / { aliases { serial0 = &uart_AO; + ethernet0 = ðmac; }; chosen { diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 4ee2e7951482f..3c31e21cbed7f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber * @@ -6,44 +7,6 @@ * * Copyright (c) 2016 Endless Computers, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -169,6 +132,7 @@ compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse"; #address-cells = <1>; #size-cells = <1>; + read-only; sn: sn@14 { reg = <0x14 0x10>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 011e8e08e429b..7d5709c37e955 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -1,45 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; @@ -52,6 +13,7 @@ aliases { serial0 = &uart_AO; + ethernet0 = ðmac; }; chosen { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index 818954b1d57f8..4cf7f6e80c6a0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber * Copyright (c) 2016 BayLibre, Inc. * Author: Neil Armstrong <narmstrong@kernel.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -54,6 +17,7 @@ aliases { serial0 = &uart_AO; + ethernet0 = ðmac; }; chosen { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index ee4ada61c59cf..54954b314a452 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber * Copyright (c) 2016 BayLibre, Inc. * Author: Kevin Hilman <khilman@kernel.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -53,6 +16,7 @@ aliases { serial0 = &uart_AO; + ethernet0 = ðmac; }; chosen { @@ -310,7 +274,7 @@ pinctrl-names = "default", "clk-gate"; bus-width = <8>; - max-frequency = <200000000>; + max-frequency = <100000000>; non-removable; disable-wp; cap-mmc-highspeed; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts index 09f34f7ef0845..9d2406a7c4fad 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber * Copyright (c) 2016 BayLibre, Inc. * Author: Kevin Hilman <khilman@kernel.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts index ae3194663d642..56e0dd1ff55c6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber * Copyright (c) 2016 BayLibre, Inc. * Author: Kevin Hilman <khilman@kernel.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 932158a778ef8..ce862266b9aac 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber * Copyright (c) 2016 BayLibre, Inc. * Author: Kevin Hilman <khilman@kernel.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "meson-gxbb.dtsi" @@ -47,6 +10,7 @@ / { aliases { serial0 = &uart_AO; + ethernet0 = ðmac; }; chosen { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts index 62fb4968d6808..c928adf85388e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts index 9a9663abdf5c0..e81e1d68b5fa1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts index 2fe167b2609dc..a8fca0c6903f3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 1fe8e24cf675c..93a4acf2c46c5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "meson-gxbb.dtsi" @@ -47,6 +10,7 @@ aliases { serial0 = &uart_AO; + ethernet0 = ðmac; }; chosen { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts index 1878ac2b2b83e..2bfe69902552e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts @@ -1,92 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 BayLibre, Inc. * Author: Neil Armstrong <narmstrong@baylibre.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -#include "meson-gxbb-p20x.dtsi" +#include "meson-gxbb-wetek.dtsi" / { compatible = "wetek,hub", "amlogic,meson-gxbb"; model = "WeTek Hub"; - - leds { - compatible = "gpio-leds"; - - system { - label = "wetek-play:system-status"; - gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>; - default-state = "on"; - panic-indicator; - }; - }; -}; - -&cvbs_connector { - status = "disabled"; -}; - -ðmac { - status = "okay"; - pinctrl-0 = <ð_rgmii_pins>; - pinctrl-names = "default"; - - phy-handle = <ð_phy0>; - phy-mode = "rgmii"; - - amlogic,tx-delay-ns = <2>; - - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - eth_phy0: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - }; - }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts index f7144fd5e03f4..0038522315de7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts @@ -1,49 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 BayLibre, Inc. * Author: Neil Armstrong <narmstrong@baylibre.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; -#include "meson-gxbb-p20x.dtsi" +#include "meson-gxbb-wetek.dtsi" #include <dt-bindings/input/input.h> / { @@ -51,15 +14,6 @@ model = "WeTek Play 2"; leds { - compatible = "gpio-leds"; - - system { - label = "wetek-play:system-status"; - gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>; - default-state = "on"; - panic-indicator; - }; - wifi { label = "wetek-play:wifi-status"; gpios = <&gpio GPIODV_26 GPIO_ACTIVE_HIGH>; @@ -85,82 +39,18 @@ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; }; }; - - cvbs-connector { - compatible = "composite-video-connector"; - - port { - cvbs_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; -}; - -&cec_AO { - status = "okay"; - pinctrl-0 = <&ao_cec_pins>; - pinctrl-names = "default"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; }; -ðmac { +&i2c_A { status = "okay"; - pinctrl-0 = <ð_rgmii_pins>; + pinctrl-0 = <&i2c_a_pins>; pinctrl-names = "default"; - - phy-handle = <ð_phy0>; - phy-mode = "rgmii"; - - amlogic,tx-delay-ns = <2>; - - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - eth_phy0: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - }; - }; }; -&hdmi_tx { +&usb1_phy { status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; - pinctrl-names = "default"; }; -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&i2c_A { +&usb1 { status = "okay"; - pinctrl-0 = <&i2c_a_pins>; - pinctrl-names = "default"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi new file mode 100644 index 0000000000000..70325b273bd2b --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi @@ -0,0 +1,256 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2016 Andreas Färber + * Copyright (c) 2016 BayLibre, Inc. + * Author: Kevin Hilman <khilman@kernel.org> + */ + +#include "meson-gxbb.dtsi" + +/ { + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + leds { + compatible = "gpio-leds"; + + system { + label = "wetek-play:system-status"; + gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>; + default-state = "on"; + panic-indicator; + }; + }; + + usb_pwr: regulator-usb-pwrs { + compatible = "regulator-fixed"; + + regulator-name = "USB_PWR"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; +}; + +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_rgmii_pins>; + pinctrl-names = "default"; + + phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + + amlogic,tx-delay-ns = <2>; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + eee-broken-1000t; + }; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vcc_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* This UART is brought out to the DB9 connector */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb0_phy { + status = "okay"; + phy-supply = <&usb_pwr>; +}; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 3290a4dc3522a..562c26a0ba333 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "meson-gx.dtsi" @@ -284,14 +247,17 @@ * MALI_0 and MALI_1 muxed to a single clock by a glitch * free mux to safely change frequency while running. */ - assigned-clocks = <&clkc CLKID_MALI_0_SEL>, + assigned-clocks = <&clkc CLKID_GP0_PLL>, + <&clkc CLKID_MALI_0_SEL>, <&clkc CLKID_MALI_0>, <&clkc CLKID_MALI>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + assigned-clock-parents = <0>, /* Do Nothing */ + <&clkc CLKID_GP0_PLL>, <0>, /* Do Nothing */ <&clkc CLKID_MALI_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <666666666>, + assigned-clock-rates = <744000000>, + <0>, /* Do Nothing */ + <744000000>, <0>; /* Do Nothing */ }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi index f06cc234693b7..eb327664a4d8c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi @@ -1,8 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 BayLibre SAS * Author: Neil Armstrong <narmstrong@baylibre.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ &apb { @@ -30,14 +29,17 @@ * MALI_0 and MALI_1 muxed to a single clock by a glitch * free mux to safely change frequency while running. */ - assigned-clocks = <&clkc CLKID_MALI_0_SEL>, + assigned-clocks = <&clkc CLKID_GP0_PLL>, + <&clkc CLKID_MALI_0_SEL>, <&clkc CLKID_MALI_0>, <&clkc CLKID_MALI>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + assigned-clock-parents = <0>, /* Do Nothing */ + <&clkc CLKID_GP0_PLL>, <0>, /* Do Nothing */ <&clkc CLKID_MALI_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <666666666>, + assigned-clock-rates = <744000000>, + <0>, /* Do Nothing */ + <744000000>, <0>; /* Do Nothing */ }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts index 4f3f03fc31b0d..a9f9bb90a877d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Endless Computers, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts index 95992cf1fe612..80a231476b809 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Endless Computers, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi index 5a90e30c10067..43321919547a3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Endless Computers, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "meson-gxl.dtsi" diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts index e82582574160c..f1c410e2da2b6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Carlo Caione * Copyright (c) 2016 BayLibre, Inc. * Author: Neil Armstrong <narmstrong@kernel.org> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; @@ -16,6 +15,7 @@ aliases { serial0 = &uart_AO; + ethernet0 = ðmac; }; chosen { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index 71a6e1ce7ad58..d32cf38463702 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; @@ -29,6 +28,7 @@ aliases { serial2 = &uart_AO_B; + ethernet0 = ðmac; }; gpio-keys-polled { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 9671f1e3c74a9..22bf37404ff1b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 BayLibre, SAS. * Author: Neil Armstrong <narmstrong@baylibre.com> * Author: Jerome Brunet <jbrunet@baylibre.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; @@ -18,6 +17,7 @@ aliases { serial0 = &uart_AO; + ethernet0 = ðmac; }; chosen { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts index 271f142791808..69c721a70e44b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber * Copyright (c) 2016 BayLibre, Inc. * Author: Neil Armstrong <narmstrong@kernel.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -52,6 +15,7 @@ aliases { serial0 = &uart_AO; + ethernet0 = ðmac; }; chosen { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts index 6e2bf858291c5..5896e8a5d86bc 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Endless Computers, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi index 7005068346a09..0a0953fbc7d42 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. * Based on meson-gx-p23x-q20x.dtsi: @@ -5,8 +6,6 @@ * Author: Carlo Caione <carlo@endlessm.com> * - Copyright (c) 2016 BayLibre, SAS. * Author: Neil Armstrong <narmstrong@baylibre.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* Common DTSI for devices which are based on the P212 reference board. */ @@ -17,6 +16,7 @@ aliases { serial0 = &uart_AO; serial1 = &uart_A; + ethernet0 = ðmac; }; chosen { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi index 3314a0b3dad97..40c19f69e9dcc 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Endless Computers, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "meson-gxl.dtsi" diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index c8514110b9da2..e1a39cbed8c9c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Endless Computers, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "meson-gx.dtsi" diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 1448c3dba08e8..4fd46c1546a7e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. * Copyright (c) 2017 BayLibre, SAS * Author: Neil Armstrong <narmstrong@baylibre.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; @@ -59,8 +58,6 @@ 1 1 2 2 3 3>; - cooling-min-level = <0>; - cooling-max-level = <3>; #cooling-cells = <2>; }; @@ -209,14 +206,10 @@ }; &cpu0 { - cooling-min-level = <0>; - cooling-max-level = <6>; #cooling-cells = <2>; }; &cpu4 { - cooling-min-level = <0>; - cooling-max-level = <4>; #cooling-cells = <2>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index e7a228f6cc7e7..f7a1cffab4a88 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 BayLibre, SAS. * Author: Neil Armstrong <narmstrong@baylibre.com> * * Copyright (c) 2016 Endless Computers, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -54,6 +17,7 @@ aliases { serial0 = &uart_AO; + ethernet0 = ðmac; }; chosen { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts index 388fac4f2d977..101417298a1dd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Endless Computers, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts index 95e11d7faab82..8d132b17514a8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Endless Computers, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index a5e9b955d5ed3..7212dc4531e49 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016-2017 Andreas Färber * @@ -8,44 +9,6 @@ * * Copyright (c) 2016 Endless Computers, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -58,6 +21,7 @@ aliases { serial0 = &uart_AO; + ethernet0 = ðmac; }; chosen { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts index dc37eecb95142..e2ea6753263b3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 BayLibre, SAS. * Author: Neil Armstrong <narmstrong@baylibre.com> * Copyright (c) 2017 Oleg <balbes-150@yandex.ru> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index 19a798d2ae2fd..d076a7c425ddd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Endless Computers, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "meson-gxl.dtsi" diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index f165f04db0c9c..eb749c50a7363 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -68,10 +68,29 @@ interrupt-controller; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; ranges = <0 0 0 0x2c1c0000 0 0x40000>; + v2m_0: v2m@0 { compatible = "arm,gic-v2m-frame"; msi-controller; - reg = <0 0 0 0x1000>; + reg = <0 0 0 0x10000>; + }; + + v2m@10000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0 0x10000 0 0x10000>; + }; + + v2m@20000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0 0x20000 0 0x10000>; + }; + + v2m@30000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0 0x30000 0 0x10000>; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index a77462da4a367..a1e3194b74837 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/sound/samsung-i2s.h> / { aliases { @@ -112,8 +113,8 @@ sound { compatible = "samsung,tm2-audio"; - audio-codec = <&wm5110>; - i2s-controller = <&i2s0>; + audio-codec = <&wm5110>, <&hdmi>; + i2s-controller = <&i2s0 0>, <&i2s1 0>; audio-amplifier = <&max98504>; mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; model = "wm5110"; @@ -217,8 +218,40 @@ }; &cmu_aud { - assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>; - assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>; + assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>, + <&cmu_aud CLK_MOUT_SCLK_AUD_I2S>, + <&cmu_aud CLK_MOUT_SCLK_AUD_PCM>, + <&cmu_top CLK_MOUT_AUD_PLL>, + <&cmu_top CLK_MOUT_AUD_PLL_USER_T>, + <&cmu_top CLK_MOUT_SCLK_AUDIO0>, + <&cmu_top CLK_MOUT_SCLK_AUDIO1>, + <&cmu_top CLK_MOUT_SCLK_SPDIF>, + + <&cmu_aud CLK_DIV_AUD_CA5>, + <&cmu_aud CLK_DIV_ACLK_AUD>, + <&cmu_aud CLK_DIV_PCLK_DBG_AUD>, + <&cmu_aud CLK_DIV_SCLK_AUD_I2S>, + <&cmu_aud CLK_DIV_SCLK_AUD_PCM>, + <&cmu_aud CLK_DIV_SCLK_AUD_SLIMBUS>, + <&cmu_aud CLK_DIV_SCLK_AUD_UART>, + <&cmu_top CLK_DIV_SCLK_AUDIO0>, + <&cmu_top CLK_DIV_SCLK_AUDIO1>, + <&cmu_top CLK_DIV_SCLK_PCM1>, + <&cmu_top CLK_DIV_SCLK_I2S1>; + + assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>, + <&cmu_aud CLK_MOUT_AUD_PLL_USER>, + <&cmu_aud CLK_MOUT_AUD_PLL_USER>, + <&cmu_top CLK_FOUT_AUD_PLL>, + <&cmu_top CLK_MOUT_AUD_PLL>, + <&cmu_top CLK_MOUT_AUD_PLL_USER_T>, + <&cmu_top CLK_MOUT_AUD_PLL_USER_T>, + <&cmu_top CLK_SCLK_AUDIO0>; + + assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>, + <196608001>, <65536001>, <32768001>, <49152001>, + <2048001>, <24576001>, <196608001>, + <24576001>, <98304001>, <2048001>, <49152001>; }; &cmu_fsys { @@ -267,6 +300,11 @@ <&cmu_top CLK_MOUT_BUS_PLL_USER>; }; +&cmu_top { + assigned-clocks = <&cmu_top CLK_FOUT_AUD_PLL>; + assigned-clock-rates = <196608001>; +}; + &cpu0 { cpu-supply = <&buck3_reg>; }; @@ -779,9 +817,22 @@ clocks = <&pmu_system_controller 0>; clock-names = "xtal"; - port { - mhl_to_hdmi: endpoint { - remote-endpoint = <&hdmi_to_mhl>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + + port@1 { + reg = <1>; + mhl_to_musb_con: endpoint { + remote-endpoint = <&musb_con_to_mhl>; + }; }; }; }; @@ -798,6 +849,25 @@ muic: max77843-muic { compatible = "maxim,max77843-muic"; + + musb_con: musb_connector { + compatible = "samsung,usb-connector-11pin", + "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@3 { + reg = <3>; + musb_con_to_mhl: endpoint { + remote-endpoint = <&mhl_to_musb_con>; + }; + }; + }; + }; }; regulators { @@ -838,6 +908,12 @@ status = "okay"; }; +&i2s1 { + assigned-clocks = <&i2s1 CLK_I2S_RCLK_SRC>; + assigned-clock-parents = <&cmu_peric CLK_SCLK_I2S1>; + status = "okay"; +}; + &mshc_0 { status = "okay"; mmc-hs200-1_8v; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 62f276970174d..c0231d077fa61 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -969,6 +969,7 @@ ddc = <&hsi2c_11>; samsung,syscon-phandle = <&pmu_system_controller>; samsung,sysreg-phandle = <&syscon_disp>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -1311,6 +1312,25 @@ status = "disabled"; }; + i2s1: i2s@14d60000 { + compatible = "samsung,exynos7-i2s"; + reg = <0x14d60000 0x100>; + dmas = <&pdma0 31 &pdma0 30>; + dma-names = "tx", "rx"; + interrupts = <GIC_SPI 435 IRQ_TYPE_NONE>; + clocks = <&cmu_peric CLK_PCLK_I2S1>, + <&cmu_peric CLK_PCLK_I2S1>, + <&cmu_peric CLK_SCLK_I2S1>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + #clock-cells = <1>; + samsung,supports-6ch; + samsung,supports-rstclr; + samsung,supports-tdm; + samsung,supports-low-rfs; + #sound-dai-cells = <1>; + status = "disabled"; + }; + pwm: pwm@14dd0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x14dd0000 0x100>; @@ -1639,7 +1659,7 @@ power-domains = <&pd_aud>; }; - i2s0: i2s0@11440000 { + i2s0: i2s@11440000 { compatible = "samsung,exynos7-i2s"; reg = <0x11440000 0x100>; dmas = <&adma 0 &adma 2>; @@ -1651,9 +1671,11 @@ <&cmu_aud CLK_SCLK_AUD_I2S>, <&cmu_aud CLK_SCLK_I2S_BCLK>; clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + #clock-cells = <1>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; power-domains = <&pd_aud>; + #sound-dai-cells = <1>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index 22723527e6261..00dd89b92b427 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -23,7 +23,7 @@ }; chosen { - linux,stdout-path = &serial_2; + stdout-path = &serial_2; }; memory@40000000 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index 82b272fb41b97..bb788eddf9f4e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -70,6 +70,24 @@ reg = <0x0>; clocks = <&clockgen 1 0>; #cooling-cells = <2>; + cpu-idle-states = <&CPU_PH20>; + }; + }; + + idle-states { + /* + * PSCI node is not added default, U-boot will add missing + * parts if it determines to use PSCI. + */ + entry-method = "arm,psci"; + + CPU_PH20: cpu-ph20 { + compatible = "arm,idle-state"; + idle-state-name = "PH20"; + arm,psci-suspend-param = <0x0>; + entry-latency-us = <1000>; + exit-latency-us = <1000>; + min-residency-us = <3000>; }; }; @@ -118,6 +136,37 @@ mask = <0x02>; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -304,37 +353,6 @@ #thermal-sensor-cells = <1>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - thermal-sensors = <&tmu 0>; - - trips { - cpu_alert: cpu-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_crit: cpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; - i2c0: i2c@2180000 { compatible = "fsl,vf610-i2c"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 380e7c713395f..1109f22bda5e5 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -81,6 +81,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; #cooling-cells = <2>; + cpu-idle-states = <&CPU_PH20>; }; cpu1: cpu@1 { @@ -89,6 +90,7 @@ reg = <0x1>; clocks = <&clockgen 1 0>; next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PH20>; }; cpu2: cpu@2 { @@ -97,6 +99,7 @@ reg = <0x2>; clocks = <&clockgen 1 0>; next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PH20>; }; cpu3: cpu@3 { @@ -105,6 +108,7 @@ reg = <0x3>; clocks = <&clockgen 1 0>; next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PH20>; }; l2: l2-cache { @@ -112,6 +116,23 @@ }; }; + idle-states { + /* + * PSCI node is not added default, U-boot will add missing + * parts if it determines to use PSCI. + */ + entry-method = "arm,psci"; + + CPU_PH20: cpu-ph20 { + compatible = "arm,idle-state"; + idle-state-name = "PH20"; + arm,psci-suspend-param = <0x0>; + entry-latency-us = <1000>; + exit-latency-us = <1000>; + min-residency-us = <3000>; + }; + }; + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0 0x80000000>; @@ -159,6 +180,37 @@ mask = <0x02>; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&tmu 3>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <1 13 0xf08>, /* Physical Secure PPI */ @@ -342,37 +394,6 @@ #thermal-sensor-cells = <1>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - - thermal-sensors = <&tmu 3>; - - trips { - cpu_alert: cpu-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit: cpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; - qman: qman@1880000 { compatible = "fsl,qman"; reg = <0x0 0x1880000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 06b5e12d04d81..136ebfa9b3332 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -122,7 +122,7 @@ CPU_PH20: cpu-ph20 { compatible = "arm,idle-state"; idle-state-name = "PH20"; - arm,psci-suspend-param = <0x00010000>; + arm,psci-suspend-param = <0x0>; entry-latency-us = <1000>; exit-latency-us = <1000>; min-residency-us = <3000>; @@ -131,6 +131,8 @@ memory@80000000 { device_type = "memory"; + /* Real size will be filled by bootloader */ + reg = <0x0 0x80000000 0x0 0x0>; }; sysclk: sysclk { @@ -147,6 +149,37 @@ mask = <0x02>; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 3>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xf) | @@ -362,37 +395,6 @@ #thermal-sensor-cells = <1>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - thermal-sensors = <&tmu 3>; - - trips { - cpu_alert: cpu-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_crit: cpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; - dspi: dspi@2100000 { compatible = "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 4fc150cd4ca5b..1c6556bcfddf8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -130,7 +130,7 @@ CPU_PH20: cpu-ph20 { compatible = "arm,idle-state"; idle-state-name = "PH20"; - arm,psci-suspend-param = <0x00010000>; + arm,psci-suspend-param = <0x0>; entry-latency-us = <1000>; exit-latency-us = <1000>; min-residency-us = <3000>; @@ -158,6 +158,44 @@ }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&cpu_alert>; + cooling-device = + <&cpu4 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */ @@ -315,44 +353,6 @@ #thermal-sensor-cells = <1>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - thermal-sensors = <&tmu 0>; - - trips { - cpu_alert: cpu-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_crit: cpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - - map1 { - trip = <&cpu_alert>; - cooling-device = - <&cpu4 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; - duart0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0500 0x0 0x100>; @@ -612,6 +612,62 @@ <0000 0 0 3 &gic 0 0 0 121 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic 0 0 0 122 IRQ_TYPE_LEVEL_HIGH>; }; + + cluster1_core0_watchdog: wdt@c000000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc000000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster1_core1_watchdog: wdt@c010000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc010000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster1_core2_watchdog: wdt@c020000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc020000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster1_core3_watchdog: wdt@c030000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc030000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster2_core0_watchdog: wdt@c100000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc100000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster2_core1_watchdog: wdt@c110000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc110000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster2_core2_watchdog: wdt@c120000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc120000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster2_core3_watchdog: wdt@c130000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc130000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; }; firmware { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi index aeaef01d375fe..0884e1a779011 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi @@ -143,7 +143,7 @@ CPU_PW20: cpu-pw20 { compatible = "arm,idle-state"; idle-state-name = "PW20"; - arm,psci-suspend-param = <0x00010000>; + arm,psci-suspend-param = <0x0>; entry-latency-us = <2000>; exit-latency-us = <2000>; min-residency-us = <6000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi index b2374469a8301..1de618801c736 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi @@ -140,21 +140,21 @@ &dspi { status = "okay"; - dflash0: n25q128a { + dflash0: n25q128a@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; spi-max-frequency = <3000000>; reg = <0>; }; - dflash1: sst25wf040b { + dflash1: sst25wf040b@1 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; spi-max-frequency = <3000000>; reg = <1>; }; - dflash2: en25s64 { + dflash2: en25s64@2 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; @@ -177,7 +177,7 @@ #size-cells = <1>; compatible = "st,m25p80"; spi-max-frequency = <20000000>; - reg = <0>; + reg = <2>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index f3a40af33af8a..137ef4dfc3e9f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -111,6 +111,55 @@ mask = <0x2>; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&tmu 4>; + + trips { + cpu_alert: cpu-alert { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_alert>; + cooling-device = + <&cpu2 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map2 { + trip = <&cpu_alert>; + cooling-device = + <&cpu4 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map3 { + trip = <&cpu_alert>; + cooling-device = + <&cpu6 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <1 13 4>, /* Physical Secure PPI, active-low */ @@ -194,55 +243,6 @@ #thermal-sensor-cells = <1>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - - thermal-sensors = <&tmu 4>; - - trips { - cpu_alert: cpu-alert { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit: cpu-crit { - temperature = <85000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu_alert>; - cooling-device = - <&cpu2 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - map2 { - trip = <&cpu_alert>; - cooling-device = - <&cpu4 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - map3 { - trip = <&cpu_alert>; - cooling-device = - <&cpu6 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; - serial0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0500 0x0 0x100>; diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi index c3c2be4f50728..ae15307f6e8bf 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi @@ -68,4 +68,10 @@ reg = <0x80000 0x4000>, <0x4080000 0x4000>; interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; }; + + bman-portal@90000 { + compatible = "fsl,bman-portal"; + reg = <0x90000 0x4000>, <0x4090000 0x4000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + }; }; diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi index 2a9aa060efdac..6a93a4a9be0e8 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi @@ -77,4 +77,11 @@ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; cell-index = <8>; }; + + qportal9: qman-portal@90000 { + compatible = "fsl,qman-portal"; + reg = <0x90000 0x4000>, <0x4090000 0x4000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + cell-index = <9>; + }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index a7ecd9074ea24..ec3eb8e33a3a5 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -100,11 +100,7 @@ reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&A73_L2>; - cpu-idle-states = < - &CPU_NAP - &CPU_SLEEP - &CLUSTER_SLEEP_1 - >; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; }; @@ -114,11 +110,7 @@ reg = <0x0 0x101>; enable-method = "psci"; next-level-cache = <&A73_L2>; - cpu-idle-states = < - &CPU_NAP - &CPU_SLEEP - &CLUSTER_SLEEP_1 - >; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; }; @@ -128,11 +120,7 @@ reg = <0x0 0x102>; enable-method = "psci"; next-level-cache = <&A73_L2>; - cpu-idle-states = < - &CPU_NAP - &CPU_SLEEP - &CLUSTER_SLEEP_1 - >; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; }; @@ -142,25 +130,13 @@ reg = <0x0 0x103>; enable-method = "psci"; next-level-cache = <&A73_L2>; - cpu-idle-states = < - &CPU_NAP - &CPU_SLEEP - &CLUSTER_SLEEP_1 - >; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; }; idle-states { entry-method = "psci"; - CPU_NAP: cpu-nap { - compatible = "arm,idle-state"; - arm,psci-suspend-param = <0x0000001>; - entry-latency-us = <7>; - exit-latency-us = <2>; - min-residency-us = <15>; - }; - CPU_SLEEP: cpu-sleep { compatible = "arm,idle-state"; local-timer-stop; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 047641fe294c6..724a0d3b76837 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -299,7 +299,9 @@ /* GPIO blocks 16 thru 19 do not appear to be routed to pins */ dwmmc_0: dwmmc0@f723d000 { + max-frequency = <150000000>; cap-mmc-highspeed; + mmc-hs200-1_8v; non-removable; bus-width = <0x8>; vmmc-supply = <&ldo19>; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 6a180d1926e8b..586b281cd5312 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -88,8 +88,6 @@ next-level-cache = <&CLUSTER0_L2>; clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; - cooling-min-level = <4>; - cooling-max-level = <0>; #cooling-cells = <2>; /* min followed by max */ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; dynamic-power-coefficient = <311>; @@ -817,6 +815,14 @@ pinctrl-1 = <&sdio_pmx_idle &sdio_clk_cfg_idle &sdio_cfg_idle>; }; + watchdog0: watchdog@f8005000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xf8005000 0x0 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ao_ctrl HI6220_WDT0_PCLK>; + clock-names = "apb_pclk"; + }; + tsensor: tsensor@0,f7030700 { compatible = "hisilicon,tsensor"; reg = <0x0 0xf7030700 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi index a049b64f2101e..35202ebe62a74 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi @@ -291,6 +291,13 @@ #interrupt-cells = <2>; num-pins = <128>; }; + + mbigen_pcie0: intc_pcie0 { + msi-parent = <&its_dsa 0x40085>; + interrupt-controller; + #interrupt-cells = <2>; + num-pins = <10>; + }; }; mbigen_dsa@c0080000 { @@ -312,6 +319,31 @@ }; }; + /** + * HiSilicon erratum 161010801: This describes the limitation + * of HiSilicon platforms hip06/hip07 to support the SMMUv3 + * mappings for PCIe MSI transactions. + * PCIe controller on these platforms has to differentiate the + * MSI payload against other DMA payload and has to modify the + * MSI payload. This makes it difficult for these platforms to + * have a SMMU translation for MSI. In order to workaround this, + * ARM SMMUv3 driver requires a quirk to treat the MSI regions + * separately. Such a quirk is currently missing for DT based + * systems. Hence please make sure that the smmu pcie node on + * hip06 is disabled as this will break the PCIe functionality + * when iommu-map entry is used along with the PCIe node. + * Refer:https://www.spinics.net/lists/arm-kernel/msg602812.html + */ + smmu0: smmu_pcie { + compatible = "arm,smmu-v3"; + reg = <0x0 0xa0040000 0x0 0x20000>; + #iommu-cells = <1>; + dma-coherent; + smmu-cb-memtype = <0x0 0x1>; + hisilicon,broken-prefetch-cmd; + status = "disabled"; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -676,6 +708,30 @@ <637 1>,<638 1>,<639 1>; status = "disabled"; }; + + pcie0: pcie@a0090000 { + compatible = "hisilicon,hip06-pcie-ecam"; + reg = <0 0xb0000000 0 0x2000000>, + <0 0xa0090000 0 0x10000>; + bus-range = <0 31>; + msi-map = <0x0000 &its_dsa 0x0000 0x2000>; + msi-map-mask = <0xffff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 + 0x5ff0000 0x01000000 0 0 0 0xb7ff0000 + 0 0x10000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0x0 0 0 1 &mbigen_pcie0 650 4 + 0x0 0 0 2 &mbigen_pcie0 650 4 + 0x0 0 0 3 &mbigen_pcie0 650 4 + 0x0 0 0 4 &mbigen_pcie0 650 4>; + status = "disabled"; + }; + }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi index 2c01a21c36656..0600a6a84ab7d 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi @@ -1083,6 +1083,31 @@ }; }; + /** + * HiSilicon erratum 161010801: This describes the limitation + * of HiSilicon platforms hip06/hip07 to support the SMMUv3 + * mappings for PCIe MSI transactions. + * PCIe controller on these platforms has to differentiate the + * MSI payload against other DMA payload and has to modify the + * MSI payload. This makes it difficult for these platforms to + * have a SMMU translation for MSI. In order to workaround this, + * ARM SMMUv3 driver requires a quirk to treat the MSI regions + * separately. Such a quirk is currently missing for DT based + * systems. Hence please make sure that the smmu pcie node on + * hip07 is disabled as this will break the PCIe functionality + * when iommu-map entry is used along with the PCIe node. + * Refer:https://www.spinics.net/lists/arm-kernel/msg602812.html + */ + smmu0: smmu_pcie { + compatible = "arm,smmu-v3"; + reg = <0x0 0xa0040000 0x0 0x20000>; + #iommu-cells = <1>; + dma-coherent; + smmu-cb-memtype = <0x0 0x1>; + hisilicon,broken-prefetch-cmd; + status = "disabled"; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -1127,6 +1152,12 @@ reg = <0x0 0xc0000000 0x0 0x10000>; }; + dsa_cpld: dsa_cpld@78000010 { + compatible = "syscon"; + reg = <0x0 0x78000010 0x0 0x100>; + reg-io-width = <2>; + }; + pcie_subctl: pcie_subctl@a0000000 { compatible = "hisilicon,pcie-sas-subctrl", "syscon"; reg = <0x0 0xa0000000 0x0 0x10000>; @@ -1258,6 +1289,7 @@ port@0 { reg = <0>; serdes-syscon = <&serdes_ctrl>; + cpld-syscon = <&dsa_cpld 0x0>; port-rst-offset = <0>; port-mode-offset = <0>; mc-mac-mask = [ff f0 00 00 00 00]; @@ -1267,6 +1299,7 @@ port@1 { reg = <1>; serdes-syscon= <&serdes_ctrl>; + cpld-syscon = <&dsa_cpld 0x4>; port-rst-offset = <1>; port-mode-offset = <1>; mc-mac-mask = [ff f0 00 00 00 00]; diff --git a/arch/arm64/boot/dts/marvell/armada-371x.dtsi b/arch/arm64/boot/dts/marvell/armada-371x.dtsi index 11226f7b9ed94..dc1182ec9fa1e 100644 --- a/arch/arm64/boot/dts/marvell/armada-371x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-371x.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 371x family of SoCs * (also named 88F3710) @@ -6,43 +7,6 @@ * * Gregory CLEMENT <gregory.clement@free-electrons.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "armada-37xx.dtsi" diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index 0f3468e777f79..f2cc00594d64a 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Marvell Armada 3720 development board * (DB-88F3720-DDR3) @@ -5,44 +6,6 @@ * * Gregory CLEMENT <gregory.clement@free-electrons.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * * This file is compatible with the version 1.4 and the version 2.0 of * the board, however the CON numbers are different between the 2 * version diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts index bdfb5553ddb52..ef7fd2ca25152 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts @@ -1,46 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Globalscale Marvell ESPRESSOBin Board * Copyright (C) 2016 Marvell * * Romain Perier <romain.perier@free-electrons.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + */ +/* + * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf */ /dts-v1/; diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi index 2554e0baea6b7..97558a64e2768 100644 --- a/arch/arm64/boot/dts/marvell/armada-372x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 372x family of SoCs * (also named 88F3720) @@ -6,43 +7,6 @@ * * Gregory CLEMENT <gregory.clement@free-electrons.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "armada-37xx.dtsi" diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 375026867342d..97207a61bc790 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 37xx family of SoCs. * @@ -5,43 +6,6 @@ * * Gregory CLEMENT <gregory.clement@free-electrons.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/arch/arm64/boot/dts/marvell/armada-7020.dtsi b/arch/arm64/boot/dts/marvell/armada-7020.dtsi index 4ab012991d9d9..4e46326dd123c 100644 --- a/arch/arm64/boot/dts/marvell/armada-7020.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-7020.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for the Armada 7020 SoC, made of an AP806 Dual and * one CP110. */ diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index 3ae05eee2c9a4..d6bec058a30a2 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for Marvell Armada 7040 Development board platform */ @@ -162,36 +123,48 @@ }; }; -&cp0_nand { +&cp0_nand_controller { /* * SPI on CPM and NAND have common pins on this board. We can - * use only one at a time. To enable the NAND (whihch will + * use only one at a time. To enable the NAND (which will * disable the SPI), the "status = "okay";" line have to be * added here. */ - num-cs = <1>; pinctrl-0 = <&nand_pins>, <&nand_rb>; pinctrl-names = "default"; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - - partition@0 { - label = "U-Boot"; - reg = <0 0x200000>; - }; - partition@200000 { - label = "Linux"; - reg = <0x200000 0xe00000>; - }; - partition@1000000 { - label = "Filesystem"; - reg = <0x1000000 0x3f000000>; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + + partition@200000 { + label = "Linux"; + reg = <0x200000 0xe00000>; + }; + + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + + }; }; }; - &cp0_spi1 { status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi index cbe460b8fc000..47247215770d7 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for the Armada 7040 SoC, made of an AP806 Quad and * one CP110. */ diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi index f63b4fbd642b1..e5c6d7c258195 100644 --- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2017 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for the Armada 70x0 SoC */ diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi index 3318d6b0214be..ba1307c0fadbe 100644 --- a/arch/arm64/boot/dts/marvell/armada-8020.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for the Armada 8020 SoC, made of an AP806 Dual and * two CP110. */ diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index dba55baff20f1..5689fb23bbab7 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for Marvell Armada 8040 Development board platform */ @@ -279,27 +240,35 @@ * Proper NAND usage will require DPR-76 to be in position 1-2, which disables * MDIO signal of CP1. */ -&cp1_nand { - num-cs = <1>; +&cp1_nand_controller { pinctrl-0 = <&nand_pins>, <&nand_rb>; pinctrl-names = "default"; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - marvell,nand-enable-arbiter; - marvell,system-controller = <&cp1_syscon0>; - nand-on-flash-bbt; - - partition@0 { - label = "U-Boot"; - reg = <0 0x200000>; - }; - partition@200000 { - label = "Linux"; - reg = <0x200000 0xe00000>; - }; - partition@1000000 { - label = "Filesystem"; - reg = <0x1000000 0x3f000000>; + + nand@0 { + reg = <0>; + nand-rb = <0>; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@200000 { + label = "Linux"; + reg = <0x200000 0xe00000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts index 626e9d0462c38..81de03ef860d8 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for MACCHIATOBin Armada 8040 community board platform */ @@ -49,7 +10,7 @@ #include <dt-bindings/gpio/gpio.h> / { - model = "Marvell 8040 MACHIATOBin"; + model = "Marvell 8040 MACCHIATOBin"; compatible = "marvell,armada8040-mcbin", "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; @@ -163,6 +124,13 @@ }; }; +/* J25 UART header */ +&cp0_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_uart1_pins>; + status = "okay"; +}; + &cp0_mdio { pinctrl-names = "default"; pinctrl-0 = <&cp0_ge_mdio_pins>; @@ -195,6 +163,10 @@ marvell,pins = "mpp37", "mpp38"; marvell,function = "i2c0"; }; + cp0_uart1_pins: uart1-pins { + marvell,pins = "mpp40", "mpp41"; + marvell,function = "uart1"; + }; cp0_xhci_vbus_pins: xhci0-vbus-pins { marvell,pins = "mpp47"; marvell,function = "gpio"; @@ -290,6 +262,17 @@ marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16"; marvell,function = "spi1"; }; + cp1_uart0_pins: uart0-pins { + marvell,pins = "mpp6", "mpp7"; + marvell,function = "uart0"; + }; +}; + +/* J27 UART header */ +&cp1_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_uart0_pins>; + status = "okay"; }; &cp1_sata0 { diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi index 83d2b40e59817..7699b19224c29 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for the Armada 8040 SoC, made of an AP806 Quad and * two CP110. */ diff --git a/arch/arm64/boot/dts/marvell/armada-8080-db.dts b/arch/arm64/boot/dts/marvell/armada-8080-db.dts index 85b58a19a9fb8..4ba158f415ced 100644 --- a/arch/arm64/boot/dts/marvell/armada-8080-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8080-db.dts @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2017 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for Marvell Armada-8080 Development board platform */ diff --git a/arch/arm64/boot/dts/marvell/armada-8080.dtsi b/arch/arm64/boot/dts/marvell/armada-8080.dtsi index d5535b7167350..299e814d1deda 100644 --- a/arch/arm64/boot/dts/marvell/armada-8080.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8080.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2017 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for Marvell Armada-8080 SoC, made of an AP810 OCTA. */ diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi index e9c84a1d3c4d0..8129b40f12a49 100644 --- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2017 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for the Armada 80x0 SoC family */ diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi index b98ea137371d3..64b5e61a698e4 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for Marvell Armada AP806. */ diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi index 116164ff260f3..746e792767f5f 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for Marvell Armada AP806. */ diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index f9b66b81f9fcc..176e38d548727 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for Marvell Armada AP806. */ diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi index 7f0661e12f5ed..7d00ae78fc796 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2017 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for Marvell Armada AP810 OCTA cores. */ diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi index 7e6f039f0f800..8107d120a8a7d 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2017 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for Marvell Armada AP810. */ diff --git a/arch/arm64/boot/dts/marvell/armada-common.dtsi b/arch/arm64/boot/dts/marvell/armada-common.dtsi index c6dd1d81c68de..d5e8aedec1887 100644 --- a/arch/arm64/boot/dts/marvell/armada-common.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR X11) +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. */ diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index a8af4136dbe79..48cad7919efa3 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -1,9 +1,7 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR X11) +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. - */ - -/* + * * Device Tree file for Marvell Armada CP110. */ @@ -213,7 +211,9 @@ reg = <0x500000 0x4000>; dma-coherent; interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CP110_LABEL(clk) 1 22>; + clock-names = "core", "reg"; + clocks = <&CP110_LABEL(clk) 1 22>, + <&CP110_LABEL(clk) 1 16>; status = "disabled"; }; @@ -223,7 +223,9 @@ reg = <0x510000 0x4000>; dma-coherent; interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CP110_LABEL(clk) 1 23>; + clock-names = "core", "reg"; + clocks = <&CP110_LABEL(clk) 1 23>, + <&CP110_LABEL(clk) 1 16>; status = "disabled"; }; @@ -232,7 +234,8 @@ "generic-ahci"; reg = <0x540000 0x30000>; interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CP110_LABEL(clk) 1 15>; + clocks = <&CP110_LABEL(clk) 1 15>, + <&CP110_LABEL(clk) 1 16>; status = "disabled"; }; @@ -241,7 +244,9 @@ reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>; dma-coherent; msi-parent = <&gic_v2m0>; - clocks = <&CP110_LABEL(clk) 1 8>; + clock-names = "core", "reg"; + clocks = <&CP110_LABEL(clk) 1 8>, + <&CP110_LABEL(clk) 1 14>; }; CP110_LABEL(xor1): xor@6c0000 { @@ -249,7 +254,9 @@ reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>; dma-coherent; msi-parent = <&gic_v2m0>; - clocks = <&CP110_LABEL(clk) 1 7>; + clock-names = "core", "reg"; + clocks = <&CP110_LABEL(clk) 1 7>, + <&CP110_LABEL(clk) 1 14>; }; CP110_LABEL(spi0): spi@700600 { @@ -257,7 +264,9 @@ reg = <0x700600 0x50>; #address-cells = <0x1>; #size-cells = <0x0>; - clocks = <&CP110_LABEL(clk) 1 21>; + clock-names = "core", "axi"; + clocks = <&CP110_LABEL(clk) 1 21>, + <&CP110_LABEL(clk) 1 17>; status = "disabled"; }; @@ -266,7 +275,9 @@ reg = <0x700680 0x50>; #address-cells = <1>; #size-cells = <0>; - clocks = <&CP110_LABEL(clk) 1 21>; + clock-names = "core", "axi"; + clocks = <&CP110_LABEL(clk) 1 21>, + <&CP110_LABEL(clk) 1 17>; status = "disabled"; }; @@ -276,7 +287,9 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CP110_LABEL(clk) 1 21>; + clock-names = "core", "reg"; + clocks = <&CP110_LABEL(clk) 1 21>, + <&CP110_LABEL(clk) 1 17>; status = "disabled"; }; @@ -286,23 +299,75 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CP110_LABEL(clk) 1 21>; + clock-names = "core", "reg"; + clocks = <&CP110_LABEL(clk) 1 21>, + <&CP110_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP110_LABEL(uart0): serial@702000 { + compatible = "snps,dw-apb-uart"; + reg = <0x702000 0x100>; + reg-shift = <2>; + interrupts = <ICU_GRP_NSR 122 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP110_LABEL(clk) 1 21>, + <&CP110_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP110_LABEL(uart1): serial@702100 { + compatible = "snps,dw-apb-uart"; + reg = <0x702100 0x100>; + reg-shift = <2>; + interrupts = <ICU_GRP_NSR 123 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP110_LABEL(clk) 1 21>, + <&CP110_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP110_LABEL(uart2): serial@702200 { + compatible = "snps,dw-apb-uart"; + reg = <0x702200 0x100>; + reg-shift = <2>; + interrupts = <ICU_GRP_NSR 124 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP110_LABEL(clk) 1 21>, + <&CP110_LABEL(clk) 1 17>; status = "disabled"; }; - CP110_LABEL(nand): nand@720000 { + CP110_LABEL(uart3): serial@702300 { + compatible = "snps,dw-apb-uart"; + reg = <0x702300 0x100>; + reg-shift = <2>; + interrupts = <ICU_GRP_NSR 125 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP110_LABEL(clk) 1 21>, + <&CP110_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP110_LABEL(nand_controller): nand@720000 { /* * Due to the limitation of the pins available * this controller is only usable on the CPM * for A7K and on the CPS for A8K. */ - compatible = "marvell,armada-8k-nand", - "marvell,armada370-nand"; + compatible = "marvell,armada-8k-nand-controller", + "marvell,armada370-nand-controller"; reg = <0x720000 0x54>; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CP110_LABEL(clk) 1 2>; + clock-names = "core", "reg"; + clocks = <&CP110_LABEL(clk) 1 2>, + <&CP110_LABEL(clk) 1 17>; marvell,system-controller = <&CP110_LABEL(syscon0)>; status = "disabled"; }; @@ -312,7 +377,9 @@ "inside-secure,safexcel-eip76"; reg = <0x760000 0x7d>; interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CP110_LABEL(clk) 1 25>; + clock-names = "core", "reg"; + clocks = <&CP110_LABEL(clk) 1 25>, + <&CP110_LABEL(clk) 1 17>; status = "okay"; }; @@ -337,7 +404,9 @@ <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", "eip"; - clocks = <&CP110_LABEL(clk) 1 26>; + clock-names = "core", "reg"; + clocks = <&CP110_LABEL(clk) 1 26>, + <&CP110_LABEL(clk) 1 17>; dma-coherent; }; }; @@ -364,7 +433,8 @@ interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; - clocks = <&CP110_LABEL(clk) 1 13>; + clock-names = "core", "reg"; + clocks = <&CP110_LABEL(clk) 1 13>, <&CP110_LABEL(clk) 1 14>; status = "disabled"; }; @@ -391,7 +461,8 @@ interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; - clocks = <&CP110_LABEL(clk) 1 11>; + clock-names = "core", "reg"; + clocks = <&CP110_LABEL(clk) 1 11>, <&CP110_LABEL(clk) 1 14>; status = "disabled"; }; @@ -418,7 +489,8 @@ interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; - clocks = <&CP110_LABEL(clk) 1 12>; + clock-names = "core", "reg"; + clocks = <&CP110_LABEL(clk) 1 12>, <&CP110_LABEL(clk) 1 14>; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts index 10f9c76cd1054..4ce9d6ca0bf78 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts @@ -41,6 +41,10 @@ }; +&auxadc { + status = "okay"; +}; + &cpu0 { proc-supply = <&cpus_fixed_vproc0>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index fdf66f4fe7c31..9d88f41aefa0a 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -289,6 +289,15 @@ (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_HIGH)>; }; + auxadc: adc@11001000 { + compatible = "mediatek,mt2712-auxadc"; + reg = <0 0x11001000 0 0x1000>; + clocks = <&pericfg CLK_PERI_AUXADC>; + clock-names = "main"; + #io-channel-cells = <1>; + status = "disabled"; + }; + uart0: serial@11002000 { compatible = "mediatek,mt2712-uart", "mediatek,mt6577-uart"; diff --git a/arch/arm64/boot/dts/mediatek/mt6380.dtsi b/arch/arm64/boot/dts/mediatek/mt6380.dtsi new file mode 100644 index 0000000000000..53b335d2de5fa --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt6380.dtsi @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for MediaTek MT6380 regulator + * + * Copyright (c) 2018 MediaTek Inc. + * Author: Chenglin Xu <chenglin.xu@mediatek.com> + * Sean Wang <sean.wang@mediatek.com> + */ + +&pwrap { + regulators { + compatible = "mediatek,mt6380-regulator"; + + mt6380_vcpu_reg: buck-vcore1 { + regulator-name = "vcore1"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1393750>; + regulator-ramp-delay = <6250>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vcore_reg: buck-vcore { + regulator-name = "vcore"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1393750>; + regulator-ramp-delay = <6250>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vrf_reg: buck-vrf { + regulator-name = "vrf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1575000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vm_reg: ldo-vm { + regulator-name = "vm"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_va_reg: ldo-va { + regulator-name = "va"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vphy_reg: ldo-vphy { + regulator-name = "vphy"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vddr_reg: ldo-vddr { + regulator-name = "vddr"; + regulator-min-microvolt = <1240000>; + regulator-max-microvolt = <1840000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vt_reg: ldo-vt { + regulator-name = "vt"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts index c08309df2cc7f..45d8655ee4231 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -7,7 +7,11 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + #include "mt7622.dtsi" +#include "mt6380.dtsi" / { model = "MediaTek MT7622 RFB1 board"; @@ -17,11 +21,476 @@ bootargs = "console=ttyS0,115200n1"; }; + cpus { + cpu@0 { + proc-supply = <&mt6380_vcpu_reg>; + sram-supply = <&mt6380_vm_reg>; + }; + + cpu@1 { + proc-supply = <&mt6380_vcpu_reg>; + sram-supply = <&mt6380_vm_reg>; + }; + }; + + gpio-keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + factory { + label = "factory"; + linux,code = <BTN_0>; + gpios = <&pio 0 0>; + }; + + wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&pio 102 0>; + }; + }; + memory { reg = <0 0x40000000 0 0x3F000000>; }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "fixed-5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_pins>; + status = "okay"; + + pcie@0,0 { + status = "okay"; + }; +}; + +&pio { + /* eMMC is shared pin with parallel NAND */ + emmc_pins_default: emmc-pins-default { + mux { + function = "emmc", "emmc_rst"; + groups = "emmc"; + }; + + /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7", + * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4, + * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively + */ + conf-cmd-dat { + pins = "NDL0", "NDL1", "NDL2", + "NDL3", "NDL4", "NDL5", + "NDL6", "NDL7", "NRB"; + input-enable; + bias-pull-up; + }; + + conf-clk { + pins = "NCLE"; + bias-pull-down; + }; + }; + + emmc_pins_uhs: emmc-pins-uhs { + mux { + function = "emmc"; + groups = "emmc"; + }; + + conf-cmd-dat { + pins = "NDL0", "NDL1", "NDL2", + "NDL3", "NDL4", "NDL5", + "NDL6", "NDL7", "NRB"; + input-enable; + drive-strength = <4>; + bias-pull-up; + }; + + conf-clk { + pins = "NCLE"; + drive-strength = <4>; + bias-pull-down; + }; + }; + + eth_pins: eth-pins { + mux { + function = "eth"; + groups = "mdc_mdio", "rgmii_via_gmac2"; + }; + }; + + i2c1_pins: i2c1-pins { + mux { + function = "i2c"; + groups = "i2c1_0"; + }; + }; + + i2c2_pins: i2c2-pins { + mux { + function = "i2c"; + groups = "i2c2_0"; + }; + }; + + i2s1_pins: i2s1-pins { + mux { + function = "i2s"; + groups = "i2s_out_bclk_ws_mclk", + "i2s1_in_data", + "i2s1_out_data"; + }; + }; + + irrx_pins: irrx-pins { + mux { + function = "ir"; + groups = "ir_1_rx"; + }; + }; + + irtx_pins: irtx-pins { + mux { + function = "ir"; + groups = "ir_1_tx"; + }; + }; + + /* Parallel nand is shared pin with eMMC */ + parallel_nand_pins: parallel-nand-pins { + mux { + function = "flash"; + groups = "par_nand"; + }; + }; + + pcie0_pins: pcie0-pins { + mux { + function = "pcie"; + groups = "pcie0_pad_perst", + "pcie0_1_waken", + "pcie0_1_clkreq"; + }; + }; + + pcie1_pins: pcie1-pins { + mux { + function = "pcie"; + groups = "pcie1_pad_perst", + "pcie1_0_waken", + "pcie1_0_clkreq"; + }; + }; + + pmic_bus_pins: pmic-bus-pins { + mux { + function = "pmic"; + groups = "pmic_bus"; + }; + }; + + pwm7_pins: pwm1-2-pins { + mux { + function = "pwm"; + groups = "pwm_ch7_2"; + }; + }; + + wled_pins: wled-pins { + mux { + function = "led"; + groups = "wled"; + }; + }; + + sd0_pins_default: sd0-pins-default { + mux { + function = "sd"; + groups = "sd_0"; + }; + + /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN", + * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1, + * DAT2, DAT3, CMD, CLK for SD respectively. + */ + conf-cmd-data { + pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN", + "I2S2_IN","I2S4_OUT"; + input-enable; + drive-strength = <8>; + bias-pull-up; + }; + conf-clk { + pins = "I2S3_OUT"; + drive-strength = <12>; + bias-pull-down; + }; + conf-cd { + pins = "TXD3"; + bias-pull-up; + }; + }; + + sd0_pins_uhs: sd0-pins-uhs { + mux { + function = "sd"; + groups = "sd_0"; + }; + + conf-cmd-data { + pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN", + "I2S2_IN","I2S4_OUT"; + input-enable; + bias-pull-up; + }; + + conf-clk { + pins = "I2S3_OUT"; + bias-pull-down; + }; + }; + + /* Serial NAND is shared pin with SPI-NOR */ + serial_nand_pins: serial-nand-pins { + mux { + function = "flash"; + groups = "snfi"; + }; + }; + + spic0_pins: spic0-pins { + mux { + function = "spi"; + groups = "spic0_0"; + }; + }; + + spic1_pins: spic1-pins { + mux { + function = "spi"; + groups = "spic1_0"; + }; + }; + + /* SPI-NOR is shared pin with serial NAND */ + spi_nor_pins: spi-nor-pins { + mux { + function = "flash"; + groups = "spi_nor"; + }; + }; + + /* serial NAND is shared pin with SPI-NOR */ + serial_nand_pins: serial-nand-pins { + mux { + function = "flash"; + groups = "snfi"; + }; + }; + + uart0_pins: uart0-pins { + mux { + function = "uart"; + groups = "uart0_0_tx_rx" ; + }; + }; + + uart2_pins: uart2-pins { + mux { + function = "uart"; + groups = "uart2_1_tx_rx" ; + }; + }; + + watchdog_pins: watchdog-pins { + mux { + function = "watchdog"; + groups = "watchdog"; + }; + }; +}; + +&bch { + status = "disabled"; +}; + +&btif { + status = "okay"; +}; + +&cir { + pinctrl-names = "default"; + pinctrl-0 = <&irrx_pins>; + status = "okay"; +}; + +ð { + pinctrl-names = "default"; + pinctrl-0 = <ð_pins>; + status = "okay"; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-handle = <&phy5>; + }; + + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "sgmii"; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&emmc_pins_default>; + pinctrl-1 = <&emmc_pins_uhs>; + status = "okay"; + bus-width = <8>; + max-frequency = <50000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; + non-removable; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sd0_pins_default>; + pinctrl-1 = <&sd0_pins_uhs>; + status = "okay"; + bus-width = <4>; + max-frequency = <50000000>; + cap-sd-highspeed; + r_smpl = <1>; + cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; +}; + +&nandc { + pinctrl-names = "default"; + pinctrl-0 = <¶llel_nand_pins>; + status = "disabled"; +}; + +&nor_flash { + pinctrl-names = "default"; + pinctrl-0 = <&spi_nor_pins>; + status = "disabled"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm7_pins>; + status = "okay"; +}; + +&pwrap { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_bus_pins>; + + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&sata_phy { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spic0_pins>; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spic1_pins>; + status = "okay"; +}; + +&ssusb { + vusb33-supply = <®_3p3v>; + vbus-supply = <®_5v>; + status = "okay"; +}; + +&u3phy { + status = "okay"; }; &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&watchdog { + pinctrl-names = "default"; + pinctrl-0 = <&watchdog_pins>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index b111fec2ed9d1..e9d5130df8d11 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -8,6 +8,11 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/mt7622-clk.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/power/mt7622-power.h> +#include <dt-bindings/reset/mt7622-reset.h> +#include <dt-bindings/thermal/thermal.h> / { compatible = "mediatek,mt7622"; @@ -15,6 +20,50 @@ #address-cells = <2>; #size-cells = <2>; + cpu_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + opp-300000000 { + opp-hz = /bits/ 64 <30000000>; + opp-microvolt = <950000>; + }; + + opp-437500000 { + opp-hz = /bits/ 64 <437500000>; + opp-microvolt = <1000000>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1050000>; + }; + + opp-812500000 { + opp-hz = /bits/ 64 <812500000>; + opp-microvolt = <1100000>; + }; + + opp-1025000000 { + opp-hz = /bits/ 64 <1025000000>; + opp-microvolt = <1150000>; + }; + + opp-1137500000 { + opp-hz = /bits/ 64 <1137500000>; + opp-microvolt = <1200000>; + }; + + opp-1262500000 { + opp-hz = /bits/ 64 <1262500000>; + opp-microvolt = <1250000>; + }; + + opp-1350000000 { + opp-hz = /bits/ 64 <1350000000>; + opp-microvolt = <1310000>; + }; + }; + cpus { #address-cells = <2>; #size-cells = <0>; @@ -23,6 +72,11 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x0>; + clocks = <&infracfg CLK_INFRA_MUX1_SEL>, + <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; enable-method = "psci"; clock-frequency = <1300000000>; }; @@ -31,21 +85,26 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x1>; + clocks = <&infracfg CLK_INFRA_MUX1_SEL>, + <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cpu_opp_table>; enable-method = "psci"; clock-frequency = <1300000000>; }; }; - uart_clk: dummy25m { + pwrap_clk: dummy40m { compatible = "fixed-clock"; + clock-frequency = <40000000>; #clock-cells = <0>; - clock-frequency = <25000000>; }; - bus_clk: dummy280m { + clk25m: oscillator { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <280000000>; + clock-frequency = <25000000>; + clock-output-names = "clkxtal"; }; psci { @@ -65,6 +124,58 @@ }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&thermal 0>; + + trips { + cpu_passive: cpu-passive { + temperature = <47000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_active: cpu-active { + temperature = <67000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_hot: cpu-hot { + temperature = <87000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu-crit { + temperature = <107000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&cpu_active>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map2 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupt-parent = <&gic>; @@ -78,6 +189,58 @@ IRQ_TYPE_LEVEL_HIGH)>; }; + infracfg: infracfg@10000000 { + compatible = "mediatek,mt7622-infracfg", + "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pwrap: pwrap@10001000 { + compatible = "mediatek,mt7622-pwrap"; + reg = <0 0x10001000 0 0x250>; + reg-names = "pwrap"; + clocks = <&infracfg CLK_INFRA_PMIC_PD>, <&pwrap_clk>; + clock-names = "spi", "wrap"; + resets = <&infracfg MT7622_INFRA_PMIC_WRAP_RST>; + reset-names = "pwrap"; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pericfg: pericfg@10002000 { + compatible = "mediatek,mt7622-pericfg", + "syscon"; + reg = <0 0x10002000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + scpsys: scpsys@10006000 { + compatible = "mediatek,mt7622-scpsys", + "syscon"; + #power-domain-cells = <1>; + reg = <0 0x10006000 0 0x1000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>; + infracfg = <&infracfg>; + clocks = <&topckgen CLK_TOP_HIF_SEL>; + clock-names = "hif_sel"; + }; + + cir: cir@10009000 { + compatible = "mediatek,mt7622-cir"; + reg = <0 0x10009000 0 0x1000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_IRRX_PD>, + <&topckgen CLK_TOP_AXI_SEL>; + clock-names = "clk", "bus"; + status = "disabled"; + }; + sysirq: interrupt-controller@10200620 { compatible = "mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq"; @@ -87,6 +250,62 @@ reg = <0 0x10200620 0 0x20>; }; + efuse: efuse@10206000 { + compatible = "mediatek,mt7622-efuse", + "mediatek,efuse"; + reg = <0 0x10206000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + thermal_calibration: calib@198 { + reg = <0x198 0xc>; + }; + }; + + apmixedsys: apmixedsys@10209000 { + compatible = "mediatek,mt7622-apmixedsys", + "syscon"; + reg = <0 0x10209000 0 0x1000>; + #clock-cells = <1>; + }; + + topckgen: topckgen@10210000 { + compatible = "mediatek,mt7622-topckgen", + "syscon"; + reg = <0 0x10210000 0 0x1000>; + #clock-cells = <1>; + }; + + rng: rng@1020f000 { + compatible = "mediatek,mt7622-rng", + "mediatek,mt7623-rng"; + reg = <0 0x1020f000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_TRNG>; + clock-names = "rng"; + }; + + pio: pinctrl@10211000 { + compatible = "mediatek,mt7622-pinctrl"; + reg = <0 0x10211000 0 0x1000>; + gpio-controller; + #gpio-cells = <2>; + }; + + watchdog: watchdog@10212000 { + compatible = "mediatek,mt7622-wdt", + "mediatek,mt6589-wdt"; + reg = <0 0x10212000 0 0x800>; + }; + + rtc: rtc@10212800 { + compatible = "mediatek,mt7622-rtc", + "mediatek,soc-rtc"; + reg = <0 0x10212800 0 0x200>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_RTC>; + clock-names = "rtc"; + }; + gic: interrupt-controller@10300000 { compatible = "arm,gic-400"; interrupt-controller; @@ -98,13 +317,459 @@ <0 0x10360000 0 0x2000>; }; + auxadc: adc@11001000 { + compatible = "mediatek,mt7622-auxadc"; + reg = <0 0x11001000 0 0x1000>; + clocks = <&pericfg CLK_PERI_AUXADC_PD>; + clock-names = "main"; + #io-channel-cells = <1>; + }; + uart0: serial@11002000 { compatible = "mediatek,mt7622-uart", "mediatek,mt6577-uart"; reg = <0 0x11002000 0 0x400>; interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>, <&bus_clk>; + clocks = <&topckgen CLK_TOP_UART_SEL>, + <&pericfg CLK_PERI_UART1_PD>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt7622-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x400>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_UART_SEL>, + <&pericfg CLK_PERI_UART1_PD>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,mt7622-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x400>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_UART_SEL>, + <&pericfg CLK_PERI_UART2_PD>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart3: serial@11005000 { + compatible = "mediatek,mt7622-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11005000 0 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_UART_SEL>, + <&pericfg CLK_PERI_UART3_PD>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + pwm: pwm@11006000 { + compatible = "mediatek,mt7622-pwm"; + reg = <0 0x11006000 0 0x1000>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_PWM_SEL>, + <&pericfg CLK_PERI_PWM_PD>, + <&pericfg CLK_PERI_PWM1_PD>, + <&pericfg CLK_PERI_PWM2_PD>, + <&pericfg CLK_PERI_PWM3_PD>, + <&pericfg CLK_PERI_PWM4_PD>, + <&pericfg CLK_PERI_PWM5_PD>, + <&pericfg CLK_PERI_PWM6_PD>; + clock-names = "top", "main", "pwm1", "pwm2", "pwm3", "pwm4", + "pwm5", "pwm6"; + status = "disabled"; + }; + + i2c0: i2c@11007000 { + compatible = "mediatek,mt7622-i2c"; + reg = <0 0x11007000 0 0x90>, + <0 0x11000100 0 0x80>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C0_PD>, + <&pericfg CLK_PERI_AP_DMA_PD>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@11008000 { + compatible = "mediatek,mt7622-i2c"; + reg = <0 0x11008000 0 0x90>, + <0 0x11000180 0 0x80>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C1_PD>, + <&pericfg CLK_PERI_AP_DMA_PD>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11009000 { + compatible = "mediatek,mt7622-i2c"; + reg = <0 0x11009000 0 0x90>, + <0 0x11000200 0 0x80>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C2_PD>, + <&pericfg CLK_PERI_AP_DMA_PD>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@1100a000 { + compatible = "mediatek,mt7622-spi"; + reg = <0 0x1100a000 0 0x100>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI0_SEL>, + <&pericfg CLK_PERI_SPI0_PD>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + thermal: thermal@1100b000 { + #thermal-sensor-cells = <1>; + compatible = "mediatek,mt7622-thermal"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <0 78 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_THERM_PD>, + <&pericfg CLK_PERI_AUXADC_PD>; + clock-names = "therm", "auxadc"; + resets = <&pericfg MT7622_PERI_THERM_SW_RST>; + reset-names = "therm"; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + nvmem-cells = <&thermal_calibration>; + nvmem-cell-names = "calibration-data"; + }; + + btif: serial@1100c000 { + compatible = "mediatek,mt7622-btif", + "mediatek,mtk-btif"; + reg = <0 0x1100c000 0 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_BTIF_PD>; + clock-names = "main"; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + nandc: nfi@1100d000 { + compatible = "mediatek,mt7622-nfc"; + reg = <0 0x1100D000 0 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_NFI_PD>, + <&pericfg CLK_PERI_SNFI_PD>; + clock-names = "nfi_clk", "pad_clk"; + ecc-engine = <&bch>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + bch: ecc@1100e000 { + compatible = "mediatek,mt7622-ecc"; + reg = <0 0x1100e000 0 0x1000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_NFIECC_PD>; + clock-names = "nfiecc_clk"; + status = "disabled"; + }; + + nor_flash: spi@11014000 { + compatible = "mediatek,mt7622-nor", + "mediatek,mt8173-nor"; + reg = <0 0x11014000 0 0xe0>; + clocks = <&pericfg CLK_PERI_FLASH_PD>, + <&topckgen CLK_TOP_FLASH_SEL>; + clock-names = "spi", "sf"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@11016000 { + compatible = "mediatek,mt7622-spi"; + reg = <0 0x11016000 0 0x100>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI1_SEL>, + <&pericfg CLK_PERI_SPI1_PD>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart4: serial@11019000 { + compatible = "mediatek,mt7622-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11019000 0 0x400>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_UART_SEL>, + <&pericfg CLK_PERI_UART4_PD>; clock-names = "baud", "bus"; status = "disabled"; }; + + mmc0: mmc@11230000 { + compatible = "mediatek,mt7622-mmc"; + reg = <0 0x11230000 0 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_MSDC30_0_PD>, + <&topckgen CLK_TOP_MSDC50_0_SEL>; + clock-names = "source", "hclk"; + status = "disabled"; + }; + + mmc1: mmc@11240000 { + compatible = "mediatek,mt7622-mmc"; + reg = <0 0x11240000 0 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_MSDC30_1_PD>, + <&topckgen CLK_TOP_AXI_SEL>; + clock-names = "source", "hclk"; + status = "disabled"; + }; + + ssusbsys: ssusbsys@1a000000 { + compatible = "mediatek,mt7622-ssusbsys", + "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + ssusb: usb@1a0c0000 { + compatible = "mediatek,mt7622-xhci", + "mediatek,mtk-xhci"; + reg = <0 0x1a0c0000 0 0x01000>, + <0 0x1a0c4700 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>; + clocks = <&ssusbsys CLK_SSUSB_SYS_EN>, + <&ssusbsys CLK_SSUSB_REF_EN>, + <&ssusbsys CLK_SSUSB_MCU_EN>, + <&ssusbsys CLK_SSUSB_DMA_EN>; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck"; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u3port0 PHY_TYPE_USB3>, + <&u2port1 PHY_TYPE_USB2>; + + status = "disabled"; + }; + + u3phy: usb-phy@1a0c4000 { + compatible = "mediatek,mt7622-u3phy", + "mediatek,generic-tphy-v1"; + reg = <0 0x1a0c4000 0 0x700>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + u2port0: usb-phy@1a0c4800 { + reg = <0 0x1a0c4800 0 0x0100>; + #phy-cells = <1>; + clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>; + clock-names = "ref"; + }; + + u3port0: usb-phy@1a0c4900 { + reg = <0 0x1a0c4900 0 0x0700>; + #phy-cells = <1>; + clocks = <&clk25m>; + clock-names = "ref"; + }; + + u2port1: usb-phy@1a0c5000 { + reg = <0 0x1a0c5000 0 0x0100>; + #phy-cells = <1>; + clocks = <&ssusbsys CLK_SSUSB_U2_PHY_1P_EN>; + clock-names = "ref"; + }; + }; + + pciesys: pciesys@1a100800 { + compatible = "mediatek,mt7622-pciesys", + "syscon"; + reg = <0 0x1a100800 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pcie: pcie@1a140000 { + compatible = "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0 0x1a140000 0 0x1000>, + <0 0x1a143000 0 0x1000>, + <0 0x1a145000 0 0x1000>; + reg-names = "subsys", "port0", "port1"; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pciesys CLK_PCIE_P0_MAC_EN>, + <&pciesys CLK_PCIE_P1_MAC_EN>, + <&pciesys CLK_PCIE_P0_AHB_EN>, + <&pciesys CLK_PCIE_P0_AHB_EN>, + <&pciesys CLK_PCIE_P0_AUX_EN>, + <&pciesys CLK_PCIE_P1_AUX_EN>, + <&pciesys CLK_PCIE_P0_AXI_EN>, + <&pciesys CLK_PCIE_P1_AXI_EN>, + <&pciesys CLK_PCIE_P0_OBFF_EN>, + <&pciesys CLK_PCIE_P1_OBFF_EN>, + <&pciesys CLK_PCIE_P0_PIPE_EN>, + <&pciesys CLK_PCIE_P1_PIPE_EN>; + clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1", + "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1", + "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + status = "disabled"; + + pcie0: pcie@0,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + status = "disabled"; + + num-lanes = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie1: pcie@1,0 { + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + status = "disabled"; + + num-lanes = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; + + sata: sata@1a200000 { + compatible = "mediatek,mt7622-ahci", + "mediatek,mtk-ahci"; + reg = <0 0x1a200000 0 0x1100>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hostc"; + clocks = <&pciesys CLK_SATA_AHB_EN>, + <&pciesys CLK_SATA_AXI_EN>, + <&pciesys CLK_SATA_ASIC_EN>, + <&pciesys CLK_SATA_RBC_EN>, + <&pciesys CLK_SATA_PM_EN>; + clock-names = "ahb", "axi", "asic", "rbc", "pm"; + phys = <&sata_port PHY_TYPE_SATA>; + phy-names = "sata-phy"; + ports-implemented = <0x1>; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + resets = <&pciesys MT7622_SATA_AXI_BUS_RST>, + <&pciesys MT7622_SATA_PHY_SW_RST>, + <&pciesys MT7622_SATA_PHY_REG_RST>; + reset-names = "axi", "sw", "reg"; + mediatek,phy-mode = <&pciesys>; + status = "disabled"; + }; + + sata_phy: sata-phy@1a243000 { + compatible = "mediatek,generic-tphy-v1"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + sata_port: sata-phy@1a243000 { + reg = <0 0x1a243000 0 0x0100>; + clocks = <&topckgen CLK_TOP_ETH_500M>; + clock-names = "ref"; + #phy-cells = <1>; + }; + }; + + ethsys: syscon@1b000000 { + compatible = "mediatek,mt7622-ethsys", + "syscon"; + reg = <0 0x1b000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + eth: ethernet@1b100000 { + compatible = "mediatek,mt7622-eth", + "mediatek,mt2701-eth", + "syscon"; + reg = <0 0x1b100000 0 0x20000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETH_SEL>, + <ðsys CLK_ETH_ESW_EN>, + <ðsys CLK_ETH_GP0_EN>, + <ðsys CLK_ETH_GP1_EN>, + <ðsys CLK_ETH_GP2_EN>, + <&sgmiisys CLK_SGMII_TX250M_EN>, + <&sgmiisys CLK_SGMII_RX250M_EN>, + <&sgmiisys CLK_SGMII_CDR_REF>, + <&sgmiisys CLK_SGMII_CDR_FB>, + <&topckgen CLK_TOP_SGMIIPLL>, + <&apmixedsys CLK_APMIXED_ETH2PLL>; + clock-names = "ethif", "esw", "gp0", "gp1", "gp2", + "sgmii_tx250m", "sgmii_rx250m", + "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", + "eth2pll"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>; + mediatek,ethsys = <ðsys>; + mediatek,sgmiisys = <&sgmiisys>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + sgmiisys: sgmiisys@1b128000 { + compatible = "mediatek,mt7622-sgmiisys", + "syscon"; + reg = <0 0x1b128000 0 0x1000>; + #clock-cells = <1>; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile index 676aa2f238d13..7c13d7df484ef 100644 --- a/arch/arm64/boot/dts/nvidia/Makefile +++ b/arch/arm64/boot/dts/nvidia/Makefile @@ -5,3 +5,4 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb +dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi new file mode 100644 index 0000000000000..ecb034177fc2c --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "tegra194.dtsi" + +#include <dt-bindings/mfd/max77620.h> + +/ { + model = "NVIDIA Tegra194 P2888 Processor Module"; + compatible = "nvidia,p2888", "nvidia,tegra194"; + + aliases { + sdhci0 = "/cbb/sdhci@3460000"; + sdhci1 = "/cbb/sdhci@3400000"; + serial0 = &uartb; + i2c0 = "/bpmp/i2c"; + i2c1 = "/cbb/i2c@3160000"; + i2c2 = "/cbb/i2c@c240000"; + i2c3 = "/cbb/i2c@3180000"; + i2c4 = "/cbb/i2c@3190000"; + i2c5 = "/cbb/i2c@31c0000"; + i2c6 = "/cbb/i2c@c250000"; + i2c7 = "/cbb/i2c@31e0000"; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = "serial0:115200n8"; + }; + + cbb { + serial@3110000 { + status = "okay"; + }; + + /* SDMMC1 (SD/MMC) */ + sdhci@3400000 { +/* + cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>; +*/ + }; + + /* SDMMC4 (eMMC) */ + sdhci@3460000 { + status = "okay"; + bus-width = <8>; + non-removable; + + vqmmc-supply = <&vdd_1v8ls>; + vmmc-supply = <&vdd_emmc_3v3>; + }; + + pmc@c360000 { + nvidia,invert-interrupt; + }; + }; + + bpmp { + i2c { + status = "okay"; + + pmic: pmic@3c { + compatible = "maxim,max20024"; + reg = <0x3c>; + + interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + + #gpio-cells = <2>; + gpio-controller; + + pinctrl-names = "default"; + pinctrl-0 = <&max20024_default>; + + max20024_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + }; + + gpio1 { + pins = "gpio1"; + function = "fps-out"; + maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; + }; + + gpio2 { + pins = "gpio2"; + function = "fps-out"; + maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; + }; + + gpio3 { + pins = "gpio3"; + function = "fps-out"; + maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; + }; + + gpio4 { + pins = "gpio4"; + function = "32k-out1"; + drive-push-pull = <1>; + }; + + gpio6 { + pins = "gpio6"; + function = "gpio"; + drive-push-pull = <1>; + }; + + gpio7 { + pins = "gpio7"; + function = "gpio"; + drive-push-pull = <0>; + }; + }; + + fps { + fps0 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + + fps1 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; + maxim,shutdown-fps-time-period-us = <640>; + maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>; + }; + + fps2 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + }; + + regulators { + in-sd0-supply = <&vdd_5v0_sys>; + in-sd1-supply = <&vdd_5v0_sys>; + in-sd2-supply = <&vdd_5v0_sys>; + in-sd3-supply = <&vdd_5v0_sys>; + in-sd4-supply = <&vdd_5v0_sys>; + + in-ldo0-1-supply = <&vdd_5v0_sys>; + in-ldo2-supply = <&vdd_5v0_sys>; + in-ldo3-5-supply = <&vdd_5v0_sys>; + in-ldo4-6-supply = <&vdd_5v0_sys>; + in-ldo7-8-supply = <&vdd_1v8ls>; + + sd0 { + regulator-name = "VDD_1V0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + sd1 { + regulator-name = "VDD_1V8HS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8ls: sd2 { + regulator-name = "VDD_1V8LS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + sd3 { + regulator-name = "VDD_1V8AO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + sd4 { + regulator-name = "VDD_DDR_1V1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo0 { + regulator-name = "VDD_RTC"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "VDD_AO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_emmc_3v3: ldo3 { + regulator-name = "VDD_EMMC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5 { + regulator-name = "VDD_USB_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo6 { + regulator-name = "VDD_SDIO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7 { + regulator-name = "VDD_CSI_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_sys: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + + regulator-name = "VIN_SYS_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts new file mode 100644 index 0000000000000..9ff3c18280c40 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra194-p2888.dtsi" + +/ { + model = "NVIDIA Tegra194 P2972-0000 Development Board"; + compatible = "nvidia,p2972-0000", "nvidia,tegra194"; + + cbb { + /* SDMMC1 (SD/MMC) */ + sdhci@3400000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi new file mode 100644 index 0000000000000..6322ef265c2ff --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -0,0 +1,344 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/clock/tegra194-clock.h> +#include <dt-bindings/gpio/tegra194-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mailbox/tegra186-hsp.h> +#include <dt-bindings/reset/tegra194-reset.h> + +/ { + compatible = "nvidia,tegra194"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + /* control backbone */ + cbb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x40000000>; + + uarta: serial@3100000 { + compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; + reg = <0x03100000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_UARTA>; + clock-names = "serial"; + resets = <&bpmp TEGRA194_RESET_UARTA>; + reset-names = "serial"; + status = "disabled"; + }; + + uartb: serial@3110000 { + compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; + reg = <0x03110000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_UARTB>; + clock-names = "serial"; + resets = <&bpmp TEGRA194_RESET_UARTB>; + reset-names = "serial"; + status = "disabled"; + }; + + uartd: serial@3130000 { + compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; + reg = <0x03130000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_UARTD>; + clock-names = "serial"; + resets = <&bpmp TEGRA194_RESET_UARTD>; + reset-names = "serial"; + status = "disabled"; + }; + + uarte: serial@3140000 { + compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; + reg = <0x03140000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_UARTE>; + clock-names = "serial"; + resets = <&bpmp TEGRA194_RESET_UARTE>; + reset-names = "serial"; + status = "disabled"; + }; + + uartf: serial@3150000 { + compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; + reg = <0x03150000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_UARTF>; + clock-names = "serial"; + resets = <&bpmp TEGRA194_RESET_UARTF>; + reset-names = "serial"; + status = "disabled"; + }; + + gen1_i2c: i2c@3160000 { + compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + reg = <0x03160000 0x10000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA194_CLK_I2C1>; + clock-names = "div-clk"; + resets = <&bpmp TEGRA194_RESET_I2C1>; + reset-names = "i2c"; + status = "disabled"; + }; + + uarth: serial@3170000 { + compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; + reg = <0x03170000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_UARTH>; + clock-names = "serial"; + resets = <&bpmp TEGRA194_RESET_UARTH>; + reset-names = "serial"; + status = "disabled"; + }; + + cam_i2c: i2c@3180000 { + compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + reg = <0x03180000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA194_CLK_I2C3>; + clock-names = "div-clk"; + resets = <&bpmp TEGRA194_RESET_I2C3>; + reset-names = "i2c"; + status = "disabled"; + }; + + /* shares pads with dpaux1 */ + dp_aux_ch1_i2c: i2c@3190000 { + compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + reg = <0x03190000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA194_CLK_I2C4>; + clock-names = "div-clk"; + resets = <&bpmp TEGRA194_RESET_I2C4>; + reset-names = "i2c"; + status = "disabled"; + }; + + /* shares pads with dpaux0 */ + dp_aux_ch0_i2c: i2c@31b0000 { + compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + reg = <0x031b0000 0x10000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA194_CLK_I2C6>; + clock-names = "div-clk"; + resets = <&bpmp TEGRA194_RESET_I2C6>; + reset-names = "i2c"; + status = "disabled"; + }; + + gen7_i2c: i2c@31c0000 { + compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + reg = <0x031c0000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA194_CLK_I2C7>; + clock-names = "div-clk"; + resets = <&bpmp TEGRA194_RESET_I2C7>; + reset-names = "i2c"; + status = "disabled"; + }; + + gen9_i2c: i2c@31e0000 { + compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + reg = <0x031e0000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA194_CLK_I2C9>; + clock-names = "div-clk"; + resets = <&bpmp TEGRA194_RESET_I2C9>; + reset-names = "i2c"; + status = "disabled"; + }; + + sdmmc1: sdhci@3400000 { + compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci"; + reg = <0x03400000 0x10000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_SDMMC1>; + clock-names = "sdhci"; + resets = <&bpmp TEGRA194_RESET_SDMMC1>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdmmc3: sdhci@3440000 { + compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci"; + reg = <0x03440000 0x10000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_SDMMC3>; + clock-names = "sdhci"; + resets = <&bpmp TEGRA194_RESET_SDMMC3>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdmmc4: sdhci@3460000 { + compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci"; + reg = <0x03460000 0x10000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_SDMMC4>; + clock-names = "sdhci"; + resets = <&bpmp TEGRA194_RESET_SDMMC4>; + reset-names = "sdhci"; + status = "disabled"; + }; + + gic: interrupt-controller@3881000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x03881000 0x1000>, + <0x03882000 0x2000>, + <0x03884000 0x2000>, + <0x03886000 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-parent = <&gic>; + }; + + hsp_top0: hsp@3c00000 { + compatible = "nvidia,tegra186-hsp"; + reg = <0x03c00000 0xa0000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "doorbell"; + #mbox-cells = <2>; + }; + + gen2_i2c: i2c@c240000 { + compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + reg = <0x0c240000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA194_CLK_I2C2>; + clock-names = "div-clk"; + resets = <&bpmp TEGRA194_RESET_I2C2>; + reset-names = "i2c"; + status = "disabled"; + }; + + gen8_i2c: i2c@c250000 { + compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + reg = <0x0c250000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA194_CLK_I2C8>; + clock-names = "div-clk"; + resets = <&bpmp TEGRA194_RESET_I2C8>; + reset-names = "i2c"; + status = "disabled"; + }; + + uartc: serial@c280000 { + compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; + reg = <0x0c280000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_UARTC>; + clock-names = "serial"; + resets = <&bpmp TEGRA194_RESET_UARTC>; + reset-names = "serial"; + status = "disabled"; + }; + + uartg: serial@c290000 { + compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; + reg = <0x0c290000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_UARTG>; + clock-names = "serial"; + resets = <&bpmp TEGRA194_RESET_UARTG>; + reset-names = "serial"; + status = "disabled"; + }; + + pmc@c360000 { + compatible = "nvidia,tegra194-pmc"; + reg = <0x0c360000 0x10000>, + <0x0c370000 0x10000>, + <0x0c380000 0x10000>, + <0x0c390000 0x10000>, + <0x0c3a0000 0x10000>; + reg-names = "pmc", "wake", "aotag", "scratch", "misc"; + }; + }; + + sysram@40000000 { + compatible = "nvidia,tegra194-sysram", "mmio-sram"; + reg = <0x0 0x40000000 0x0 0x50000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x40000000 0x50000>; + + cpu_bpmp_tx: shmem@4e000 { + compatible = "nvidia,tegra194-bpmp-shmem"; + reg = <0x4e000 0x1000>; + label = "cpu-bpmp-tx"; + pool; + }; + + cpu_bpmp_rx: shmem@4f000 { + compatible = "nvidia,tegra194-bpmp-shmem"; + reg = <0x4f000 0x1000>; + label = "cpu-bpmp-rx"; + pool; + }; + }; + + bpmp: bpmp { + compatible = "nvidia,tegra186-bpmp"; + mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB + TEGRA_HSP_DB_MASTER_BPMP>; + shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + bpmp_i2c: i2c { + compatible = "nvidia,tegra186-bpmp-i2c"; + nvidia,bpmp-bus-id = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; + + bpmp_thermal: thermal { + compatible = "nvidia,tegra186-bpmp-thermal"; + #thermal-sensor-cells = <1>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&gic>; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index d67ef4319f3b4..9d5a0e6b2ca4f 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1325,6 +1325,11 @@ status = "okay"; }; + sata@70020000 { + status = "okay"; + phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>; + }; + padctl@7009f000 { status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 9c2402108772f..3be920efee823 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -798,6 +798,22 @@ #iommu-cells = <1>; }; + sata@70020000 { + compatible = "nvidia,tegra210-ahci"; + reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */ + <0x0 0x70020000 0x0 0x7000>, /* SATA */ + <0x0 0x70001100 0x0 0x1000>; /* SATA AUX */ + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_SATA>, + <&tegra_car TEGRA210_CLK_SATA_OOB>; + clock-names = "sata", "sata-oob"; + resets = <&tegra_car 124>, + <&tegra_car 123>, + <&tegra_car 129>; + reset-names = "sata", "sata-oob", "sata-cold"; + status = "disabled"; + }; + hda@70030000 { compatible = "nvidia,tegra210-hda", "nvidia,tegra30-hda"; reg = <0x0 0x70030000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index e51b049007260..66b318e1de800 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/clock/qcom,gcc-msm8916.h> #include <dt-bindings/reset/qcom,gcc-msm8916.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/thermal/thermal.h> / { model = "Qualcomm Technologies, Inc. MSM8916"; @@ -113,6 +114,9 @@ next-level-cache = <&L2_0>; enable-method = "psci"; cpu-idle-states = <&CPU_SPC>; + clocks = <&apcs 0>; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; }; CPU1: cpu@1 { @@ -122,6 +126,9 @@ next-level-cache = <&L2_0>; enable-method = "psci"; cpu-idle-states = <&CPU_SPC>; + clocks = <&apcs 0>; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; }; CPU2: cpu@2 { @@ -131,6 +138,9 @@ next-level-cache = <&L2_0>; enable-method = "psci"; cpu-idle-states = <&CPU_SPC>; + clocks = <&apcs 0>; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; }; CPU3: cpu@3 { @@ -140,6 +150,9 @@ next-level-cache = <&L2_0>; enable-method = "psci"; cpu-idle-states = <&CPU_SPC>; + clocks = <&apcs 0>; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; }; L2_0: l2-cache { @@ -188,6 +201,13 @@ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu-thermal1 { @@ -208,10 +228,35 @@ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; }; + cpu_opp_table: cpu_opp_table { + compatible = "operating-points-v2"; + opp-shared; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + }; + opp-998400000 { + opp-hz = /bits/ 64 <998400000>; + }; + }; + gpu_opp_table: opp_table { compatible = "operating-points-v2"; @@ -326,9 +371,18 @@ status = "disabled"; }; - apcs: syscon@b011000 { - compatible = "syscon"; - reg = <0x0b011000 0x1000>; + a53pll: clock@b016000 { + compatible = "qcom,msm8916-a53pll"; + reg = <0xb016000 0x40>; + #clock-cells = <0>; + }; + + apcs: mailbox@b011000 { + compatible = "qcom,msm8916-apcs-kpss-global", "syscon"; + reg = <0xb011000 0x1000>; + #mbox-cells = <1>; + clocks = <&a53pll>; + #clock-cells = <0>; }; blsp1_uart2: serial@78b0000 { diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 0a6f7952bbb18..410ae787ebb4d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -75,6 +75,17 @@ reg = <0x0 0x86200000 0x0 0x2600000>; no-map; }; + + rmtfs@86700000 { + compatible = "qcom,rmtfs-mem"; + + size = <0x0 0x200000>; + alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; }; cpus { @@ -232,10 +243,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; clocks { @@ -497,8 +508,8 @@ blsp2_spi5: spi@75ba000{ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x075ba000 0x600>; - interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_QUP5_SPI_APPS_CLK>, + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 2186d0193b737..5ede06000ea46 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -7,5 +7,7 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb r8a77965-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb +dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi index 26769a11a1909..f9acd125d6875 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi @@ -23,6 +23,7 @@ /delete-node/ mmu@febe0000; /delete-node/ mmu@fe980000; + /delete-node/ mmu@fd950000; /delete-node/ mmu@fd960000; /delete-node/ mmu@fd970000; @@ -80,7 +81,7 @@ vspd3: vsp@fea38000 { compatible = "renesas,vsp2"; - reg = <0 0xfea38000 0 0x4000>; + reg = <0 0xfea38000 0 0x8000>; interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 620>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index d12df6f2ff092..1d5e3ac0231ca 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -41,6 +41,9 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7795_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; a57_1: cpu@1 { @@ -50,6 +53,9 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7795_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; a57_2: cpu@2 { @@ -59,6 +65,9 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU2>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7795_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; a57_3: cpu@3 { @@ -68,6 +77,9 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU3>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7795_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; a53_0: cpu@100 { @@ -77,6 +89,8 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; a53_1: cpu@101 { @@ -86,6 +100,8 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; a53_2: cpu@102 { @@ -95,6 +111,8 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU2>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; a53_3: cpu@103 { @@ -104,6 +122,8 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU3>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; L2_CA57: cache-controller-0 { @@ -165,11 +185,59 @@ clock-frequency = <0>; }; - /* External SCIF clock - to be overridden by boards that provide it */ - scif_clk: scif { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + opp-1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <960000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; }; /* External PCIe clock - can be overridden by the board */ @@ -208,6 +276,13 @@ method = "smc"; }; + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + soc: soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -470,6 +545,15 @@ status = "disabled"; }; + ipmmu_pv1: mmu@fd950000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xfd950000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 7>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + ipmmu_pv2: mmu@fd960000 { compatible = "renesas,ipmmu-r8a7795"; reg = <0 0xfd960000 0 0x1000>; @@ -798,7 +882,7 @@ clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 812>; - phy-mode = "rgmii-txid"; + phy-mode = "rgmii"; iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; @@ -992,8 +1076,9 @@ <&cpg CPG_CORE R8A7795_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x31>, <&dmac1 0x30>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 520>; status = "disabled"; @@ -1009,8 +1094,9 @@ <&cpg CPG_CORE R8A7795_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x33>, <&dmac1 0x32>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 519>; status = "disabled"; @@ -1026,8 +1112,9 @@ <&cpg CPG_CORE R8A7795_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x35>, <&dmac1 0x34>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 518>; status = "disabled"; @@ -1138,8 +1225,9 @@ <&cpg CPG_CORE R8A7795_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x51>, <&dmac1 0x50>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 207>; status = "disabled"; @@ -1154,8 +1242,9 @@ <&cpg CPG_CORE R8A7795_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x53>, <&dmac1 0x52>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 206>; status = "disabled"; @@ -1170,8 +1259,9 @@ <&cpg CPG_CORE R8A7795_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x13>, <&dmac1 0x12>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 310>; status = "disabled"; @@ -1218,8 +1308,9 @@ <&cpg CPG_CORE R8A7795_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x5b>, <&dmac1 0x5a>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, + <&dmac2 0x5b>, <&dmac2 0x5a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 202>; status = "disabled"; @@ -1251,8 +1342,9 @@ clocks = <&cpg CPG_MOD 931>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 931>; - dmas = <&dmac1 0x91>, <&dmac1 0x90>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; i2c-scl-internal-delay-ns = <110>; status = "disabled"; }; @@ -1267,8 +1359,9 @@ clocks = <&cpg CPG_MOD 930>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 930>; - dmas = <&dmac1 0x93>, <&dmac1 0x92>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -1283,8 +1376,9 @@ clocks = <&cpg CPG_MOD 929>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 929>; - dmas = <&dmac1 0x95>, <&dmac1 0x94>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -2143,7 +2237,7 @@ vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x4000>; + reg = <0 0xfea20000 0 0x8000>; interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2163,7 +2257,7 @@ vspd1: vsp@fea28000 { compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x4000>; + reg = <0 0xfea28000 0 0x8000>; interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 622>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2183,7 +2277,7 @@ vspd2: vsp@fea30000 { compatible = "renesas,vsp2"; - reg = <0 0xfea30000 0 0x4000>; + reg = <0 0xfea30000 0 0x8000>; interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 621>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2320,9 +2414,9 @@ tsc: thermal@e6198000 { compatible = "renesas,r8a7795-thermal"; - reg = <0 0xe6198000 0 0x68>, - <0 0xe61a0000 0 0x5c>, - <0 0xe61a8000 0 0x5c>; + reg = <0 0xe6198000 0 0x100>, + <0 0xe61a0000 0 0x100>, + <0 0xe61a8000 0 0x100>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; @@ -2357,12 +2451,24 @@ thermal-sensors = <&tsc 0>; trips { + sensor1_passive: sensor1-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; sensor1_crit: sensor1-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&sensor1_passive>; + cooling-device = <&a57_0 4 4>; + }; + }; }; sensor_thermal2: sensor-thermal2 { @@ -2371,12 +2477,24 @@ thermal-sensors = <&tsc 1>; trips { + sensor2_passive: sensor2-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; sensor2_crit: sensor2-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&sensor2_passive>; + cooling-device = <&a57_0 4 4>; + }; + }; }; sensor_thermal3: sensor-thermal3 { @@ -2385,12 +2503,24 @@ thermal-sensors = <&tsc 2>; trips { + sensor3_passive: sensor3-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; sensor3_crit: sensor3-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&sensor3_passive>; + cooling-device = <&a57_0 4 4>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index c5192d513d7dc..556eb8e45499d 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -71,6 +71,9 @@ power-domains = <&sysc R8A7796_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7796_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; a57_1: cpu@1 { @@ -80,6 +83,9 @@ power-domains = <&sysc R8A7796_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7796_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; a53_0: cpu@100 { @@ -89,6 +95,8 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; a53_1: cpu@101 { @@ -98,6 +106,8 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; a53_2: cpu@102 { @@ -107,6 +117,8 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU2>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; a53_3: cpu@103 { @@ -116,6 +128,8 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU3>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; L2_CA57: cache-controller-0 { @@ -147,6 +161,72 @@ clock-frequency = <0>; }; + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + opp-1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <960000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + }; + /* External PCIe clock - can be overridden by the board */ pcie_bus_clk: pcie_bus { compatible = "fixed-clock"; @@ -894,7 +974,7 @@ clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 812>; - phy-mode = "rgmii-txid"; + phy-mode = "rgmii"; iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; @@ -1561,9 +1641,9 @@ tsc: thermal@e6198000 { compatible = "renesas,r8a7796-thermal"; - reg = <0 0xe6198000 0 0x68>, - <0 0xe61a0000 0 0x5c>, - <0 0xe61a8000 0 0x5c>; + reg = <0 0xe6198000 0 0x100>, + <0 0xe61a0000 0 0x100>, + <0 0xe61a8000 0 0x100>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; @@ -1839,7 +1919,7 @@ vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x4000>; + reg = <0 0xfea20000 0 0x8000>; interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -1859,7 +1939,7 @@ vspd1: vsp@fea28000 { compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x4000>; + reg = <0 0xfea28000 0 0x8000>; interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 622>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -1879,7 +1959,7 @@ vspd2: vsp@fea30000 { compatible = "renesas,vsp2"; - reg = <0 0xfea30000 0 0x4000>; + reg = <0 0xfea30000 0 0x8000>; interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 621>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -1998,12 +2078,24 @@ thermal-sensors = <&tsc 0>; trips { + sensor1_passive: sensor1-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; sensor1_crit: sensor1-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&sensor1_passive>; + cooling-device = <&a57_0 5 5>; + }; + }; }; sensor_thermal2: sensor-thermal2 { @@ -2012,12 +2104,24 @@ thermal-sensors = <&tsc 1>; trips { + sensor2_passive: sensor2-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; sensor2_crit: sensor2-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&sensor2_passive>; + cooling-device = <&a57_0 5 5>; + }; + }; }; sensor_thermal3: sensor-thermal3 { @@ -2026,12 +2130,24 @@ thermal-sensors = <&tsc 2>; trips { + sensor3_passive: sensor3-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; sensor3_crit: sensor3-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&sensor3_passive>; + cooling-device = <&a57_0 5 5>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts new file mode 100644 index 0000000000000..75d890d91df93 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Salvator-X board with R-Car M3-N + * + * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org> + */ + +/dts-v1/; +#include "r8a77965.dtsi" +#include "salvator-x.dtsi" + +/ { + model = "Renesas Salvator-X board based on r8a77965"; + compatible = "renesas,salvator-x", "renesas,r8a77965"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts new file mode 100644 index 0000000000000..a83a00deed9ef --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Salvator-X 2nd version board with R-Car M3-N + * + * Copyright (C) 2017 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a77965.dtsi" +#include "salvator-xs.dtsi" + +/ { + model = "Renesas Salvator-X 2nd version board based on r8a77965"; + compatible = "renesas,salvator-xs", "renesas,r8a77965"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi new file mode 100644 index 0000000000000..f0871fcdd9845 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -0,0 +1,878 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the r8a77965 SoC + * + * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org> + * + * Based on r8a7796.dtsi + * Copyright (C) 2016 Renesas Electronics Corp. + */ + +#include <dt-bindings/clock/renesas-cpg-mssr.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#define CPG_AUDIO_CLK_I 10 + +/ { + compatible = "renesas,r8a77965"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c7 = &i2c_dvfs; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a57_0: cpu@0 { + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x0>; + device_type = "cpu"; + power-domains = <&sysc 0>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + }; + + a57_1: cpu@1 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x1>; + device_type = "cpu"; + power-domains = <&sysc 1>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + }; + + L2_CA57: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc 12>; + cache-unified; + cache-level = <2>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, + <&a57_1>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc 32>; + resets = <&cpg 408>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a77965"; + reg = <0 0xe6060000 0 0x50c>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a77965-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a77965-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a77965-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a77965", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc 32>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a77965", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 29>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc 32>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a77965", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 15>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc 32>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a77965", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc 32>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a77965", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 18>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc 32>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a77965", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc 32>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a77965", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 906>; + power-domains = <&sysc 32>; + resets = <&cpg 906>; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a77965", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 4>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc 32>; + resets = <&cpg 905>; + }; + + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a77965", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc 32>; + resets = <&cpg 407>; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a77965", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a77965", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a77965", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a77965", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE 20>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a77965", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE 20>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a77965", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e88000 0 64>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE 20>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc 32>; + resets = <&cpg 310>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a77965", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 64>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE 20>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a77965", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 64>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE 20>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a77965", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6f30000 0 64>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE 20>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, + <&dmac2 0x5b>, <&dmac2 0x5a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 202>; + status = "disabled"; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a77965", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc 32>; + resets = <&cpg 812>; + phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + csi20: csi2@fea80000 { + reg = <0 0xfea80000 0 0x10000>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + csi40: csi2@feaa0000 { + reg = <0 0xfeaa0000 0 0x10000>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + vin0: video@e6ef0000 { + reg = <0 0xe6ef0000 0 0x1000>; + /* placeholder */ + }; + + vin1: video@e6ef1000 { + reg = <0 0xe6ef1000 0 0x1000>; + /* placeholder */ + }; + + vin2: video@e6ef2000 { + reg = <0 0xe6ef2000 0 0x1000>; + /* placeholder */ + }; + + vin3: video@e6ef3000 { + reg = <0 0xe6ef3000 0 0x1000>; + /* placeholder */ + }; + + vin4: video@e6ef4000 { + reg = <0 0xe6ef4000 0 0x1000>; + /* placeholder */ + }; + + vin5: video@e6ef5000 { + reg = <0 0xe6ef5000 0 0x1000>; + /* placeholder */ + }; + + vin6: video@e6ef6000 { + reg = <0 0xe6ef6000 0 0x1000>; + /* placeholder */ + }; + + vin7: video@e6ef7000 { + reg = <0 0xe6ef7000 0 0x1000>; + /* placeholder */ + }; + + ohci0: usb@ee080000 { + reg = <0 0xee080000 0 0x100>; + /* placeholder */ + }; + + ehci0: usb@ee080100 { + reg = <0 0xee080100 0 0x100>; + /* placeholder */ + }; + + usb2_phy0: usb-phy@ee080200 { + reg = <0 0xee080200 0 0x700>; + /* placeholder */ + }; + + usb2_phy1: usb-phy@ee0a0200 { + reg = <0 0xee0a0200 0 0x700>; + /* placeholder */ + }; + + ohci1: usb@ee0a0000 { + reg = <0 0xee0a0000 0 0x100>; + /* placeholder */ + }; + + ehci1: usb@ee0a0100 { + reg = <0 0xee0a0100 0 0x100>; + /* placeholder */ + }; + + i2c0: i2c@e6500000 { + reg = <0 0xe6500000 0 0x40>; + /* placeholder */ + }; + + i2c1: i2c@e6508000 { + reg = <0 0xe6508000 0 0x40>; + /* placeholder */ + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe6510000 0 0x40>; + /* placeholder */ + }; + + i2c3: i2c@e66d0000 { + reg = <0 0xe66d0000 0 0x40>; + /* placeholder */ + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe66d8000 0 0x40>; + /* placeholder */ + }; + + i2c5: i2c@e66e0000 { + reg = <0 0xe66e0000 0 0x40>; + /* placeholder */ + }; + + i2c6: i2c@e66e8000 { + reg = <0 0xe66e8000 0 0x40>; + /* placeholder */ + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a77965", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc 32>; + resets = <&cpg 926>; + dmas = <&dmac0 0x11>, <&dmac0 0x10>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + pwm0: pwm@e6e30000 { + reg = <0 0xe6e30000 0 8>; + /* placeholder */ + }; + + pwm1: pwm@e6e31000 { + reg = <0 0xe6e31000 0 8>; + #pwm-cells = <2>; + /* placeholder */ + }; + + pwm2: pwm@e6e32000 { + reg = <0 0xe6e32000 0 8>; + /* placeholder */ + }; + + pwm3: pwm@e6e33000 { + reg = <0 0xe6e33000 0 8>; + /* placeholder */ + }; + + pwm4: pwm@e6e34000 { + reg = <0 0xe6e34000 0 8>; + /* placeholder */ + }; + + pwm5: pwm@e6e35000 { + reg = <0 0xe6e35000 0 8>; + /* placeholder */ + }; + + pwm6: pwm@e6e36000 { + reg = <0 0xe6e36000 0 8>; + /* placeholder */ + }; + + du: display@feb00000 { + reg = <0 0xfeb00000 0 0x80000>, + <0 0xfeb90000 0 0x14>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_hdmi0: endpoint { + }; + }; + port@2 { + reg = <2>; + du_out_lvds0: endpoint { + }; + }; + }; + }; + + hsusb: usb@e6590000 { + reg = <0 0xe6590000 0 0x100>; + /* placeholder */ + }; + + pciec0: pcie@fe000000 { + reg = <0 0xfe000000 0 0x80000>; + /* placeholder */ + }; + + pciec1: pcie@ee800000 { + reg = <0 0xee800000 0 0x80000>; + /* placeholder */ + }; + + rcar_sound: sound@ec500000 { + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + /* placeholder */ + + rcar_sound,dvc { + dvc0: dvc-0 { + }; + dvc1: dvc-1 { + }; + }; + + rcar_sound,src { + src0: src-0 { + }; + src1: src-1 { + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + }; + ssi1: ssi-1 { + }; + }; + }; + + sdhi0: sd@ee100000 { + reg = <0 0xee100000 0 0x2000>; + /* placeholder */ + }; + + sdhi1: sd@ee120000 { + reg = <0 0xee120000 0 0x2000>; + /* placeholder */ + }; + + sdhi2: sd@ee140000 { + reg = <0 0xee140000 0 0x2000>; + /* placeholder */ + }; + + sdhi3: sd@ee160000 { + reg = <0 0xee160000 0 0x2000>; + /* placeholder */ + }; + + usb3_phy0: usb-phy@e65ee000 { + reg = <0 0xe65ee000 0 0x90>; + #phy-cells = <0>; + /* placeholder */ + }; + + usb3_peri0: usb@ee020000 { + reg = <0 0xee020000 0 0x400>; + /* placeholder */ + }; + + xhci0: usb@ee000000 { + reg = <0 0xee000000 0 0xc00>; + /* placeholder */ + }; + + wdt0: watchdog@e6020000 { + reg = <0 0xe6020000 0 0x0c>; + /* placeholder */ + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 8fe5c193e0496..3c5f598c97663 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -36,11 +36,14 @@ &avb { renesas,no-ether-link; phy-handle = <&phy0>; + phy-mode = "rgmii-id"; status = "okay"; phy0: ethernet-phy@0 { rxc-skew-ps = <1500>; reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -52,11 +55,41 @@ clock-frequency = <32768>; }; +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + io_expander: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&pfc { + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; }; &scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 8624ca87d6b2e..a8ceeac77992d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -34,6 +34,7 @@ &avb { renesas,no-ether-link; phy-handle = <&phy0>; + phy-mode = "rgmii-id"; status = "okay"; phy0: ethernet-phy@0 { @@ -50,6 +51,16 @@ clock-frequency = <32768>; }; +&pfc { + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; +}; + &scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index c35a117fc4470..c6db8ea439062 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -19,9 +19,12 @@ #address-cells = <2>; #size-cells = <2>; - psci { - compatible = "arm,psci-1.0", "arm,psci-0.2"; - method = "smc"; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; }; cpus { @@ -60,6 +63,11 @@ clock-frequency = <0>; }; + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + /* External SCIF clock - to be overridden by boards that provide it */ scif_clk: scif { compatible = "fixed-clock"; @@ -92,18 +100,6 @@ resets = <&cpg 408>; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | - IRQ_TYPE_LEVEL_LOW)>; - }; - rwdt: watchdog@e6020000 { compatible = "renesas,r8a77970-wdt", "renesas,rcar-gen3-wdt"; @@ -178,6 +174,101 @@ #iommu-cells = <1>; }; + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a77970"; + reg = <0 0xe6060000 0 0x504>; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a77970", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 22>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a77970", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 28>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a77970", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 17>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a77970", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 17>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a77970", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 6>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a77970", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 15>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + intc_ex: interrupt-controller@e61c0000 { compatible = "renesas,intc-ex-r8a77970", "renesas,irqc"; #interrupt-cells = <2>; @@ -255,6 +346,91 @@ <&ipmmu_ds1 22>, <&ipmmu_ds1 23>; }; + i2c0: i2c@e6500000 { + compatible = "renesas,i2c-r8a77970", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + compatible = "renesas,i2c-r8a77970", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + compatible = "renesas,i2c-r8a77970", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + compatible = "renesas,i2c-r8a77970", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 928>; + dmas = <&dmac1 0x97>, <&dmac1 0x96>, + <&dmac2 0x97>, <&dmac2 0x96>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + compatible = "renesas,i2c-r8a77970", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 927>; + dmas = <&dmac1 0x99>, <&dmac1 0x98>, + <&dmac2 0x99>, <&dmac2 0x98>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + hscif0: serial@e6540000 { compatible = "renesas,hscif-r8a77970", "renesas,rcar-gen3-hscif", @@ -400,7 +576,7 @@ avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a77970", "renesas,etheravb-rcar-gen3"; - reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + reg = <0 0xe6800000 0 0x800>; interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, @@ -436,10 +612,18 @@ clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 812>; - phy-mode = "rgmii-id"; + phy-mode = "rgmii"; iommus = <&ipmmu_rt 3>; #address-cells = <1>; #size-cells = <0>; }; }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts new file mode 100644 index 0000000000000..06cf6845765ad --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Condor board + * + * Copyright (C) 2018 Renesas Electronics Corp. + * Copyright (C) 2018 Cogent Embedded, Inc. + */ + +/dts-v1/; +#include "r8a77980.dtsi" + +/ { + model = "Renesas Condor board based on r8a77980"; + compatible = "renesas,condor", "renesas,r8a77980"; + + aliases { + serial0 = &scif0; + ethernet0 = &avb; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0 0x48000000 0 0x78000000>; + }; +}; + +&avb { + phy-mode = "rgmii-id"; + phy-handle = <&phy0>; + renesas,no-ether-link; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + }; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&scif0 { + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi new file mode 100644 index 0000000000000..03845fd74996d --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -0,0 +1,385 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the r8a77980 SoC + * + * Copyright (C) 2018 Renesas Electronics Corp. + * Copyright (C) 2018 Cogent Embedded, Inc. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/renesas-cpg-mssr.h> + +/ { + compatible = "renesas,r8a77980"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a53_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0>; + clocks = <&cpg CPG_CORE 0>; + power-domains = <&sysc 5>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + L2_CA53: cache-controller { + compatible = "cache"; + power-domains = <&sysc 21>; + cache-unified; + cache-level = <2>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a77980-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a77980-rst"; + reg = <0 0xe6160000 0 0x200>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a77980-sysc"; + reg = <0 0xe6180000 0 0x440>; + #power-domain-cells = <1>; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a77980", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a77980", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a77980", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a77980", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x37>, <&dmac1 0x36>, + <&dmac2 0x37>, <&dmac2 0x36>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 517>; + status = "disabled"; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a77980", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc 32>; + resets = <&cpg 812>; + phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a77980", + "renesas,rcar-gen3-scif", + "renesas,scif"; + reg = <0 0xe6e60000 0 0x40>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a77980", + "renesas,rcar-gen3-scif", + "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a77980", + "renesas,rcar-gen3-scif", + "renesas,scif"; + reg = <0 0xe6c50000 0 0x40>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x57>, <&dmac1 0x56>, + <&dmac2 0x57>, <&dmac2 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a77980", + "renesas,rcar-gen3-scif", + "renesas,scif"; + reg = <0 0xe6c40000 0 0x40>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x59>, <&dmac1 0x58>, + <&dmac2 0x59>, <&dmac2 0x58>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 203>; + status = "disabled"; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a77980", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a77980", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc 32>; + resets = <&cpg 408>; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 09de73b11db8a..d03f19414028c 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -27,11 +27,61 @@ stdout-path = "serial0:115200n8"; }; + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ reg = <0x0 0x48000000 0x0 0x18000000>; }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; }; &extal_clk { @@ -46,6 +96,21 @@ }; }; + du_pins: du { + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + pwm0_pins: pwm0 { groups = "pwm0_c"; function = "pwm0"; @@ -61,12 +126,56 @@ function = "scif2"; }; + sdhi2_pins: sd2 { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <1800>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <1800>; + }; + usb0_pins: usb0 { groups = "usb0"; function = "usb0"; }; }; +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; + + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + }; +}; + &ehci0 { status = "okay"; }; @@ -80,6 +189,7 @@ pinctrl-names = "default"; renesas,no-ether-link; phy-handle = <&phy0>; + phy-mode = "rgmii-txid"; status = "okay"; phy0: ethernet-phy@0 { @@ -97,6 +207,20 @@ status = "okay"; }; +&sdhi2 { + /* used for on-board eMMC */ + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + &usb2_phy0 { pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index cff42cd1a6c89..82aed7ee984c3 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -58,6 +58,11 @@ clock-frequency = <0>; }; + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + }; + scif_clk: scif { compatible = "fixed-clock"; #clock-cells = <0>; @@ -88,18 +93,6 @@ resets = <&cpg 408>; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; - }; - rwdt: watchdog@e6020000 { compatible = "renesas,r8a77995-wdt", "renesas,rcar-gen3-wdt"; @@ -110,11 +103,6 @@ status = "disabled"; }; - pmu_a53 { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - }; - ipmmu_vi0: mmu@febd0000 { compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xfebd0000 0 0x1000>; @@ -488,7 +476,7 @@ avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a77995", "renesas,etheravb-rcar-gen3"; - reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + reg = <0 0xe6800000 0 0x800>; interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, @@ -524,7 +512,7 @@ clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 812>; - phy-mode = "rgmii-txid"; + phy-mode = "rgmii"; iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; @@ -548,6 +536,73 @@ status = "disabled"; }; + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77995", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77995", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77995", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77995", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 928>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + pwm0: pwm@e6e30000 { compatible = "renesas,pwm-r8a77995", "renesas,pwm-rcar"; reg = <0 0xe6e30000 0 0x8>; @@ -636,5 +691,105 @@ #phy-cells = <0>; status = "disabled"; }; + + vspbs: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 627>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 627>; + renesas,fcp = <&fcpvb0>; + }; + + fcpvb0: fcp@fe96f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 607>; + iommus = <&ipmmu_vp0 5>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x8000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 623>; + renesas,fcp = <&fcpvd0>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 603>; + iommus = <&ipmmu_vi0 8>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x8000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 622>; + renesas,fcp = <&fcpvd1>; + }; + + fcpvd1: fcp@fea2f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea2f000 0 0x200>; + clocks = <&cpg CPG_MOD 602>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 602>; + iommus = <&ipmmu_vi0 9>; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a77995"; + reg = <0 0xfeb00000 0 0x80000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; + vsps = <&vspd0 0 &vspd1 0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + }; + }; + + port@2 { + reg = <2>; + du_out_lvds1: endpoint { + }; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; }; }; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index c3fafb6025b33..2a7f36abd2dd8 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -256,6 +256,7 @@ pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; phy-handle = <&phy0>; + phy-mode = "rgmii-txid"; status = "okay"; phy0: ethernet-phy@0 { @@ -338,6 +339,13 @@ &i2c4 { status = "okay"; + pca9654: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + csa_vdd: adc@7c { compatible = "maxim,max9611"; reg = <0x7c>; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 3e7a6b94e9f8a..6f814845f8b66 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -146,6 +146,7 @@ pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; phy-handle = <&phy0>; + phy-mode = "rgmii-txid"; status = "okay"; phy0: ethernet-phy@0 { diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index ce2701e37d005..48a83f882947c 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -1,8 +1,10 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-lion-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb @@ -10,4 +12,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts new file mode 100644 index 0000000000000..246c317f6a682 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts @@ -0,0 +1,267 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd + */ + +/dts-v1/; +#include "rk3328.dtsi" + +/ { + model = "Firefly roc-rk3328-cc"; + compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac_clkin: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0>; + }; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0m1_gpio>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + }; + + vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb20_host_drv>; + regulator-name = "vcc_host1_5v"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + status = "okay"; +}; + +&gmac2io { + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; + assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; + clock_in_out = "input"; + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmiim1_pins>; + snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x25>; + rx_delay = <0x11>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + rk805: pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio1>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk805-clkout2"; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_io>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_18: LDO_REG1 { + regulator-name = "vcc_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_emmc: LDO_REG2 { + regulator-name = "vcc18_emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_10: LDO_REG3 { + regulator-name = "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + }; + }; +}; + +&pinctrl { + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + usb20_host_drv: usb20-host-drv { + rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>; + vmmc-supply = <&vcc_sd>; + status = "okay"; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +&u2phy_otg { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb20_otg { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index cae3415544862..be2bfbc6b4831 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -318,7 +318,7 @@ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; clock-names = "baudclk", "apb_pclk"; dmas = <&dmac 2>, <&dmac 3>; - #dma-cells = <2>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; reg-io-width = <4>; @@ -333,7 +333,7 @@ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; clock-names = "sclk_uart", "pclk_uart"; dmas = <&dmac 4>, <&dmac 5>; - #dma-cells = <2>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>; reg-io-width = <4>; @@ -348,7 +348,7 @@ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; clock-names = "baudclk", "apb_pclk"; dmas = <&dmac 6>, <&dmac 7>; - #dma-cells = <2>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart2m1_xfer>; reg-io-width = <4>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts new file mode 100644 index 0000000000000..fca8e87d8f526 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH + */ + +/dts-v1/; +#include "rk3368-lion.dtsi" + +/ { + model = "Theobroma Systems RK3368-uQ7 Baseboard"; + compatible = "tsd,rk3368-lion-haikou", "rockchip,rk3368"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + i2cmux2 { + i2c@0 { + eeprom: eeprom@50 { + compatible = "atmel,24c01"; + pagesize = <8>; + reg = <0x50>; + }; + }; + }; + + leds { + pinctrl-0 = <&led_pins_module>, <&led_sd_haikou>; + + sd-card-led { + label = "sd_card_led"; + gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + }; + }; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc3v3_baseboard: vcc3v3-baseboard { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_baseboard"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_otg: vcc5v0-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-name = "vcc5v0_otg"; + regulator-always-on; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <25000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + rockchip,default-sample-phase = <90>; + vmmc-supply = <&vcc3v3_baseboard>; + status = "okay"; +}; + +&spi2 { + cs-gpios = <0>, <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; +}; + +&uart1 { + /* alternate function of GPIO5/6 */ + status = "disabled"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&haikou_pin_hog>; + + hog { + haikou_pin_hog: haikou-pin-hog { + rockchip,pins = + /* LID_BTN */ + <RK_GPIO3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, + /* BATLOW# */ + <RK_GPIO0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>, + /* SLP_BTN# */ + <RK_GPIO3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + /* BIOS_DISABLE# */ + <RK_GPIO3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + led_sd_haikou: led-sd-gpio { + rockchip,pins = + <RK_GPIO0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_cd_gpio: sdmmc-cd-gpio { + rockchip,pins = + <RK_GPIO2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb_otg { + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = + <RK_GPIO0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi new file mode 100644 index 0000000000000..1315972412df3 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi @@ -0,0 +1,317 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH + */ + +/dts-v1/; +#include "rk3368.dtsi" + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + ext_gmac: gmac-clk { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + #clock-cells = <0>; + }; + + i2cmux1 { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c1>; + mux-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>; + + /* Q7_GPO_I2C */ + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* Q7_SMB */ + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + i2cmux2 { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c2>; + mux-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>; + + /* Q7_LVDS_BLC_I2C */ + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + fan: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + cooling-min-state = <0>; + cooling-max-state = <9>; + #cooling-cells = <2>; + }; + + rtc_twi: rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; + }; + + /* Q7_GP2_I2C */ + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_module>; + + module_led1 { + label = "module_led1"; + gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + panic-indicator; + }; + + module_led2 { + label = "module_led2"; + gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu>; +}; + +&emmc { + bus-width = <8>; + clock-frequency = <150000000>; + disable-wp; + mmc-hs200-1_8v; + non-removable; + vmmc-supply = <&vcc33_io>; + vqmmc-supply = <&vcc18_io>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc33_io>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>; + tx_delay = <0x10>; + rx_delay = <0x10>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; + clock-output-names = "xin32k", "rk808-clkout2"; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>, <&pmic_sleep>; + rockchip,system-power-controller; + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_sys>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc_sys>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_log: DCDC_REG2 { + regulator-name = "vdd_log"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + }; + + vcc33_io: DCDC_REG4 { + regulator-name = "vcc33_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc33_video: LDO_REG2 { + regulator-name = "vcc33_video"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd10_pll: LDO_REG3 { + regulator-name = "vdd10_pll"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc18_io: LDO_REG4 { + regulator-name = "vcc18_io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + vdd10_video: LDO_REG6 { + regulator-name = "vdd10_video"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc18_video: LDO_REG8 { + regulator-name = "vcc18_video"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&pinctrl { + leds { + led_pins_module: led-module-gpio { + rockchip,pins = + <RK_GPIO2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>, + <RK_GPIO3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <RK_GPIO0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + pmic_sleep: pmic-sleep { + rockchip,pins = <RK_GPIO0 RK_PA0 RK_FUNC_2 &pcfg_pull_none>; + }; + }; +}; + +&spi1 { + status = "okay"; + + norflash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index 204bdb9857b9c..18f546f2dfd11 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -516,10 +516,15 @@ compatible = "rockchip,rk3399-gru-sound"; rockchip,cpu = <&i2s0 &i2s2>; rockchip,codec = <&max98357a &headsetcodec - &codec &wacky_spi_audio>; + &codec &wacky_spi_audio &cdn_dp>; }; }; +&cdn_dp { + status = "okay"; + extcon = <&usbc_extcon0>, <&usbc_extcon1>; +}; + /* * Set some suspend operating points to avoid OVP in suspend * @@ -582,7 +587,8 @@ <&cru PCLK_PERIHP>, <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>, <&cru PCLK_PERILP0>, <&cru ACLK_CCI>, - <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>; + <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>, + <&cru ACLK_VIO>; assigned-clock-rates = <600000000>, <800000000>, <1000000000>, @@ -590,7 +596,8 @@ <37500000>, <100000000>, <100000000>, <50000000>, <800000000>, - <100000000>, <50000000>; + <100000000>, <50000000>, + <400000000>; }; &emmc_phy { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index 9a7486058455f..7d3e8bfd51dd4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -61,6 +61,30 @@ }; }; + i2s0-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "Haikou,I2S-codec"; + simple-audio-card,mclk-fs = <512>; + + simple-audio-card,codec { + clocks = <&sgtl5000_clk>; + sound-dai = <&sgtl5000>; + }; + + simple-audio-card,cpu { + bitclock-master; + frame-master; + sound-dai = <&i2s0>; + }; + }; + + sgtl5000_clk: sgtl5000-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + dc_12v: dc-12v { compatible = "regulator-fixed"; regulator-name = "dc_12v"; @@ -80,6 +104,16 @@ vin-supply = <&dc_12v>; }; + vcc5v0_baseboard: vcc5v0-baseboard { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_baseboard"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + vcc5v0_otg: vcc5v0-otg-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -89,6 +123,24 @@ regulator-name = "vcc5v0_otg"; regulator-always-on; }; + + vdda_codec: vdda-codec { + compatible = "regulator-fixed"; + regulator-name = "vdda_codec"; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_baseboard>; + }; + + vddd_codec: vddd-codec { + compatible = "regulator-fixed"; + regulator-name = "vddd_codec"; + regulator-boot-on; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1600000>; + vin-supply = <&vcc5v0_baseboard>; + }; }; &i2c1 { @@ -110,6 +162,17 @@ &i2c4 { status = "okay"; clock-frequency = <400000>; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&sgtl5000_clk>; + #sound-dai-cells = <0>; + VDDA-supply = <&vdda_codec>; + VDDIO-supply = <&vdda_codec>; + VDDD-supply = <&vddd_codec>; + status = "okay"; + }; }; &i2c6 { @@ -117,14 +180,6 @@ clock-frequency = <400000>; }; -&i2s0 { - status = "okay"; - rockchip,playback-channels = <8>; - rockchip,capture-channels = <8>; - #sound-dai-cells = <0>; - status = "okay"; -}; - &pcie_phy { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 1fc5060d7027e..4a2d06abe9c1d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -435,6 +435,28 @@ }; }; +&i2s0 { + pinctrl-0 = <&i2s0_2ch_bus>; + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + #sound-dai-cells = <0>; + status = "okay"; +}; + +/* + * As Q7 does not specify neither a global nor a RX clock for I2S these + * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO. + * Therefore we have to redefine the i2s0_2ch_bus definition to prevent + * conflicts. + */ +&i2s0_2ch_bus { + rockchip,pins = + <RK_GPIO3 RK_PD0 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 RK_PD2 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 RK_PD3 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 RK_PD7 RK_FUNC_1 &pcfg_pull_none>; +}; + &io_domains { status = "okay"; bt656-supply = <&vcc_1v8>; @@ -505,6 +527,12 @@ }; }; +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + &u2phy1 { status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts index b7bd88fb3ae3b..56952d1a3fb8b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts @@ -41,7 +41,6 @@ */ /dts-v1/; -#include <dt-bindings/input/input.h> #include "rk3399-sapphire.dtsi" / { @@ -95,22 +94,6 @@ }; }; - keys: gpio-keys { - compatible = "gpio-keys"; - autorepeat; - - power { - debounce-interval = <100>; - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - label = "GPIO Power"; - linux,code = <KEY_POWER>; - linux,input-type = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pwr_btn>; - wakeup-source; - }; - }; - rt5651-sound { compatible = "simple-audio-card"; simple-audio-card,name = "realtek,rt5651-codec"; @@ -207,18 +190,7 @@ status = "okay"; }; -&i2s2 { - #sound-dai-cells = <0>; - status = "okay"; -}; - &pinctrl { - buttons { - pwr_btn: pwr-btn { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - sdio-pwrseq { wifi_enable_h: wifi-enable-h { rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; @@ -232,6 +204,22 @@ }; }; +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + clock-frequency = <50000000>; + disable-wp; + keep-power-in-suspend; + max-frequency = <50000000>; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; +}; + &spdif { i2c-scl-rising-time-ns = <450>; i2c-scl-falling-time-ns = <15>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dts new file mode 100644 index 0000000000000..5a58060447cfa --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd. + */ + +/dts-v1/; +#include "rk3399-sapphire.dtsi" + +/ { + model = "Sapphire-RK3399 Board"; + compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index ce592a4c0c4cd..e5daed7d20263 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -41,6 +41,7 @@ */ #include "dt-bindings/pwm/pwm.h" +#include "dt-bindings/input/input.h" #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -102,6 +103,22 @@ regulator-max-microvolt = <12000000>; }; + keys: gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <KEY_POWER>; + linux,input-type = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_btn>; + wakeup-source; + }; + }; + /* switched by pmic_sleep */ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { compatible = "regulator-fixed"; @@ -143,6 +160,17 @@ regulator-always-on; vin-supply = <&vcc_sys>; }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vcc_sys>; + }; }; &cpu_l0 { @@ -421,17 +449,6 @@ regulator-off-in-suspend; }; }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 1>; - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - vin-supply = <&vcc_sys>; - }; }; &i2c3 { @@ -440,6 +457,11 @@ status = "okay"; }; +&i2s2 { + #sound-dai-cells = <0>; + status = "okay"; +}; + &io_domains { status = "okay"; @@ -470,6 +492,12 @@ }; &pinctrl { + buttons { + pwr_btn: pwr-btn { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = @@ -513,29 +541,12 @@ &sdhci { bus-width = <8>; - keep-power-in-suspend; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; non-removable; status = "okay"; }; -&sdio0 { - bus-width = <4>; - cap-sd-highspeed; - cap-sdio-irq; - clock-frequency = <50000000>; - disable-wp; - keep-power-in-suspend; - max-frequency = <50000000>; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; - sd-uhs-sdr104; - status = "okay"; -}; - &sdmmc { bus-width = <4>; cap-mmc-highspeed; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 0b81ca1d07e7e..4550c0f82be90 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -457,6 +457,42 @@ }; }; + cdn_dp: dp@fec00000 { + compatible = "rockchip,rk3399-cdn-dp"; + reg = <0x0 0xfec00000 0x0 0x100000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>; + assigned-clocks = <&cru SCLK_DP_CORE>; + assigned-clock-rates = <100000000>; + clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>, + <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>; + clock-names = "core-clk", "pclk", "spdif", "grf"; + phys = <&tcphy0_dp>, <&tcphy1_dp>; + power-domains = <&power RK3399_PD_HDCP>; + resets = <&cru SRST_DPTX_SPDIF_REC>, <&cru SRST_P_UPHY0_DPTX>, + <&cru SRST_P_UPHY0_APB>, <&cru SRST_DP_CORE>; + reset-names = "spdif", "dptx", "apb", "core"; + rockchip,grf = <&grf>; + #sound-dai-cells = <1>; + status = "disabled"; + + ports { + dp_in: port { + #address-cells = <1>; + #size-cells = <0>; + + dp_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_dp>; + }; + + dp_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_dp>; + }; + }; + }; + }; + gic: interrupt-controller@fee00000 { compatible = "arm,gic-v3"; #interrupt-cells = <4>; @@ -1286,7 +1322,8 @@ <&cru PCLK_PERIHP>, <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>, <&cru PCLK_PERILP0>, <&cru ACLK_CCI>, - <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>; + <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>, + <&cru ACLK_VIO>; assigned-clock-rates = <594000000>, <800000000>, <1000000000>, @@ -1294,7 +1331,8 @@ <37500000>, <100000000>, <100000000>, <50000000>, <600000000>, - <100000000>, <50000000>; + <100000000>, <50000000>, + <400000000>; }; grf: syscon@ff770000 { @@ -1547,6 +1585,11 @@ reg = <3>; remote-endpoint = <&mipi1_in_vopl>; }; + + vopl_out_dp: endpoint@4 { + reg = <4>; + remote-endpoint = <&dp_in_vopl>; + }; }; }; @@ -1599,6 +1642,11 @@ reg = <3>; remote-endpoint = <&mipi1_in_vopb>; }; + + vopb_out_dp: endpoint@4 { + reg = <4>; + remote-endpoint = <&dp_in_vopb>; + }; }; }; @@ -2043,6 +2091,16 @@ }; i2s0 { + i2s0_2ch_bus: i2s0-2ch-bus { + rockchip,pins = + <3 24 RK_FUNC_1 &pcfg_pull_none>, + <3 25 RK_FUNC_1 &pcfg_pull_none>, + <3 26 RK_FUNC_1 &pcfg_pull_none>, + <3 27 RK_FUNC_1 &pcfg_pull_none>, + <3 31 RK_FUNC_1 &pcfg_pull_none>, + <4 0 RK_FUNC_1 &pcfg_pull_none>; + }; + i2s0_8ch_bus: i2s0-8ch-bus { rockchip,pins = <3 24 RK_FUNC_1 &pcfg_pull_none>, @@ -2293,6 +2351,23 @@ }; }; + testclk { + test_clkout0: test-clkout0 { + rockchip,pins = + <0 0 RK_FUNC_1 &pcfg_pull_none>; + }; + + test_clkout1: test-clkout1 { + rockchip,pins = + <2 25 RK_FUNC_2 &pcfg_pull_none>; + }; + + test_clkout2: test-clkout2 { + rockchip,pins = + <0 8 RK_FUNC_3 &pcfg_pull_none>; + }; + }; + tsadc { otp_gpio: otp-gpio { rockchip,pins = <1 6 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts index 2452b2243f424..9b4dc41703e38 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts @@ -1,14 +1,13 @@ -/* - * Device Tree Source for UniPhier LD11 Global Board - * - * Copyright (C) 2016-2017 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * Kunihiko Hayashi <hayashi.kunihiko@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier LD11 Global Board +// +// Copyright (C) 2016-2017 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> +// Kunihiko Hayashi <hayashi.kunihiko@socionext.com> /dts-v1/; +#include <dt-bindings/gpio/uniphier-gpio.h> #include "uniphier-ld11.dtsi" / { @@ -37,6 +36,53 @@ device_type = "memory"; reg = <0 0x80000000 0 0x40000000>; }; + + dvdd_reg: reg-fixed { + compatible = "regulator-fixed"; + regulator-name = "DVDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + amp_vcc_reg: reg-fixed { + compatible = "regulator-fixed"; + regulator-name = "AMP_VCC"; + regulator-min-microvolt = <24000000>; + regulator-max-microvolt = <24000000>; + }; + + sound { + compatible = "audio-graph-card"; + label = "UniPhier LD11"; + widgets = "Headphone", "Headphone Jack"; + dais = <&i2s_port2 + &i2s_port3 + &i2s_port4 + &spdif_port0 + &comp_spdif_port0>; + }; + + spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + + port@0 { + spdif_tx: endpoint { + remote-endpoint = <&spdif_hiecout1>; + }; + }; + }; + + comp-spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + + port@0 { + comp_spdif_tx: endpoint { + remote-endpoint = <&comp_spdif_hiecout1>; + }; + }; + }; }; &serial0 { @@ -47,9 +93,43 @@ status = "okay"; }; +&i2s_hpcmout1 { + dai-format = "i2s"; + remote-endpoint = <&tas_speaker>; +}; + +&spdif_hiecout1 { + remote-endpoint = <&spdif_tx>; +}; + +&comp_spdif_hiecout1 { + remote-endpoint = <&comp_spdif_tx>; +}; + &i2c0 { status = "okay"; + tas5707a@1d { + compatible = "ti,tas5711"; + reg = <0x1d>; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 4) GPIO_ACTIVE_LOW>; + pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 5) GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + AVDD-supply = <&dvdd_reg>; + DVDD-supply = <&dvdd_reg>; + PVDD_A-supply = <&_vcc_reg>; + PVDD_B-supply = <&_vcc_reg>; + PVDD_C-supply = <&_vcc_reg>; + PVDD_D-supply = <&_vcc_reg>; + + port@0 { + tas_speaker: endpoint { + dai-format = "i2s"; + remote-endpoint = <&i2s_hpcmout1>; + }; + }; + }; + eeprom@50 { compatible = "st,24c64", "atmel,24c64"; reg = <0x50>; @@ -69,6 +149,17 @@ status = "okay"; }; +ð { + status = "okay"; + phy-handle = <ðphy>; +}; + +&mdio { + ethphy: ethphy@1 { + reg = <1>; + }; +}; + &nand { status = "okay"; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts index 54c53170699ad..b8f6273484480 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier LD11 Reference Board - * - * Copyright (C) 2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier LD11 Reference Board +// +// Copyright (C) 2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> /dts-v1/; #include "uniphier-ld11.dtsi" @@ -70,3 +68,14 @@ &usb2 { status = "okay"; }; + +ð { + status = "okay"; + phy-handle = <ðphy>; +}; + +&mdio { + ethphy: ethphy@1 { + reg = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index cd7c2d0a1f64b..e62bda1cf2d9d 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier LD11 SoC - * - * Copyright (C) 2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier LD11 SoC +// +// Copyright (C) 2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/uniphier-gpio.h> @@ -187,6 +185,92 @@ <21 217 3>; }; + audio@56000000 { + compatible = "socionext,uniphier-ld11-aio"; + reg = <0x56000000 0x80000>; + interrupts = <0 144 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aout1>, + <&pinctrl_aoutiec1>; + clock-names = "aio"; + clocks = <&sys_clk 40>; + reset-names = "aio"; + resets = <&sys_rst 40>; + #sound-dai-cells = <1>; + socionext,syscon = <&soc_glue>; + + i2s_port0: port@0 { + i2s_hdmi: endpoint { + }; + }; + + i2s_port1: port@1 { + i2s_pcmin2: endpoint { + }; + }; + + i2s_port2: port@2 { + i2s_line: endpoint { + dai-format = "i2s"; + remote-endpoint = <&evea_line>; + }; + }; + + i2s_port3: port@3 { + i2s_hpcmout1: endpoint { + }; + }; + + i2s_port4: port@4 { + i2s_hp: endpoint { + dai-format = "i2s"; + remote-endpoint = <&evea_hp>; + }; + }; + + spdif_port0: port@5 { + spdif_hiecout1: endpoint { + }; + }; + + src_port0: port@6 { + i2s_epcmout2: endpoint { + }; + }; + + src_port1: port@7 { + i2s_epcmout3: endpoint { + }; + }; + + comp_spdif_port0: port@8 { + comp_spdif_hiecout1: endpoint { + }; + }; + }; + + codec@57900000 { + compatible = "socionext,uniphier-evea"; + reg = <0x57900000 0x1000>; + clock-names = "evea", "exiv"; + clocks = <&sys_clk 41>, <&sys_clk 42>; + reset-names = "evea", "exiv", "adamv"; + resets = <&sys_rst 41>, <&sys_rst 42>, <&adamv_rst 0>; + #sound-dai-cells = <1>; + + port@0 { + evea_line: endpoint { + remote-endpoint = <&i2s_line>; + }; + }; + + port@1 { + evea_hp: endpoint { + remote-endpoint = <&i2s_hp>; + }; + }; + }; + adamv@57920000 { compatible = "socionext,uniphier-ld11-adamv", "simple-mfd", "syscon"; @@ -396,7 +480,7 @@ }; }; - soc-glue@5f800000 { + soc_glue: soc-glue@5f800000 { compatible = "socionext,uniphier-ld11-soc-glue", "simple-mfd", "syscon"; reg = <0x5f800000 0x2000>; @@ -460,6 +544,22 @@ }; }; + eth: ethernet@65000000 { + compatible = "socionext,uniphier-ld11-ave4"; + status = "disabled"; + reg = <0x65000000 0x8500>; + interrupts = <0 66 4>; + clocks = <&sys_clk 6>; + resets = <&sys_rst 6>; + phy-mode = "rmii"; + local-mac-address = [00 00 00 00 00 00]; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + nand: nand@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; @@ -475,3 +575,12 @@ }; #include "uniphier-pinctrl.dtsi" + +&pinctrl_aoutiec1 { + drive-strength = <4>; /* default: 4mA */ + + ao1arc { + pins = "AO1ARC"; + drive-strength = <8>; /* 8mA */ + }; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts index fc2bc9d75d35e..fe6608ea32777 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts @@ -1,14 +1,13 @@ -/* - * Device Tree Source for UniPhier LD20 Global Board - * - * Copyright (C) 2015-2017 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * Kunihiko Hayashi <hayashi.kunihiko@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier LD20 Global Board +// +// Copyright (C) 2015-2017 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> +// Kunihiko Hayashi <hayashi.kunihiko@socionext.com> /dts-v1/; +#include <dt-bindings/gpio/uniphier-gpio.h> #include "uniphier-ld20.dtsi" / { @@ -37,6 +36,53 @@ device_type = "memory"; reg = <0 0x80000000 0 0xc0000000>; }; + + dvdd_reg: reg-fixed { + compatible = "regulator-fixed"; + regulator-name = "DVDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + amp_vcc_reg: reg-fixed { + compatible = "regulator-fixed"; + regulator-name = "AMP_VCC"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + sound { + compatible = "audio-graph-card"; + label = "UniPhier LD20"; + widgets = "Headphone", "Headphone Jack"; + dais = <&i2s_port2 + &i2s_port3 + &i2s_port4 + &spdif_port0 + &comp_spdif_port0>; + }; + + spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + + port@0 { + spdif_tx: endpoint { + remote-endpoint = <&spdif_hiecout1>; + }; + }; + }; + + comp-spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + + port@0 { + comp_spdif_tx: endpoint { + remote-endpoint = <&comp_spdif_hiecout1>; + }; + }; + }; }; &serial0 { @@ -47,8 +93,55 @@ status = "okay"; }; +&i2s_hpcmout1 { + dai-format = "i2s"; + remote-endpoint = <&tas_speaker>; +}; + +&spdif_hiecout1 { + remote-endpoint = <&spdif_tx>; +}; + +&comp_spdif_hiecout1 { + remote-endpoint = <&comp_spdif_tx>; +}; + &i2c0 { status = "okay"; + + tas5707@1b { + compatible = "ti,tas5711"; + reg = <0x1b>; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 0) GPIO_ACTIVE_LOW>; + pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 1) GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + AVDD-supply = <&dvdd_reg>; + DVDD-supply = <&dvdd_reg>; + PVDD_A-supply = <&_vcc_reg>; + PVDD_B-supply = <&_vcc_reg>; + PVDD_C-supply = <&_vcc_reg>; + PVDD_D-supply = <&_vcc_reg>; + + port@0 { + tas_speaker: endpoint { + dai-format = "i2s"; + remote-endpoint = <&i2s_hpcmout1>; + }; + }; + }; +}; + +ð { + status = "okay"; + phy-mode = "rmii"; + pinctrl-0 = <&pinctrl_ether_rmii>; + phy-handle = <ðphy>; +}; + +&mdio { + ethphy: ethphy@1 { + reg = <1>; + }; }; &nand { diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts index 693371033c902..2c1a92fafbfbe 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier LD20 Reference Board - * - * Copyright (C) 2015-2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier LD20 Reference Board +// +// Copyright (C) 2015-2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> /dts-v1/; #include "uniphier-ld20.dtsi" @@ -58,3 +56,14 @@ &i2c0 { status = "okay"; }; + +ð { + status = "okay"; + phy-handle = <ðphy>; +}; + +&mdio { + ethphy: ethphy@0 { + reg = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index 8a3276ba2da1a..9efe20d075890 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier LD20 SoC - * - * Copyright (C) 2015-2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier LD20 SoC +// +// Copyright (C) 2015-2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/uniphier-gpio.h> @@ -287,6 +285,92 @@ <21 217 3>; }; + audio@56000000 { + compatible = "socionext,uniphier-ld20-aio"; + reg = <0x56000000 0x80000>; + interrupts = <0 144 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aout1>, + <&pinctrl_aoutiec1>; + clock-names = "aio"; + clocks = <&sys_clk 40>; + reset-names = "aio"; + resets = <&sys_rst 40>; + #sound-dai-cells = <1>; + socionext,syscon = <&soc_glue>; + + i2s_port0: port@0 { + i2s_hdmi: endpoint { + }; + }; + + i2s_port1: port@1 { + i2s_pcmin2: endpoint { + }; + }; + + i2s_port2: port@2 { + i2s_line: endpoint { + dai-format = "i2s"; + remote-endpoint = <&evea_line>; + }; + }; + + i2s_port3: port@3 { + i2s_hpcmout1: endpoint { + }; + }; + + i2s_port4: port@4 { + i2s_hp: endpoint { + dai-format = "i2s"; + remote-endpoint = <&evea_hp>; + }; + }; + + spdif_port0: port@5 { + spdif_hiecout1: endpoint { + }; + }; + + src_port0: port@6 { + i2s_epcmout2: endpoint { + }; + }; + + src_port1: port@7 { + i2s_epcmout3: endpoint { + }; + }; + + comp_spdif_port0: port@8 { + comp_spdif_hiecout1: endpoint { + }; + }; + }; + + codec@57900000 { + compatible = "socionext,uniphier-evea"; + reg = <0x57900000 0x1000>; + clock-names = "evea", "exiv"; + clocks = <&sys_clk 41>, <&sys_clk 42>; + reset-names = "evea", "exiv", "adamv"; + resets = <&sys_rst 41>, <&sys_rst 42>, <&adamv_rst 0>; + #sound-dai-cells = <1>; + + port@0 { + evea_line: endpoint { + remote-endpoint = <&i2s_line>; + }; + }; + + port@1 { + evea_hp: endpoint { + remote-endpoint = <&i2s_hp>; + }; + }; + }; + adamv@57920000 { compatible = "socionext,uniphier-ld20-adamv", "simple-mfd", "syscon"; @@ -442,7 +526,7 @@ cdns,phy-dll-delay-sdclk-hsmmc = <21>; }; - soc-glue@5f800000 { + soc_glue: soc-glue@5f800000 { compatible = "socionext,uniphier-ld20-soc-glue", "simple-mfd", "syscon"; reg = <0x5f800000 0x2000>; @@ -513,6 +597,24 @@ }; }; + eth: ethernet@65000000 { + compatible = "socionext,uniphier-ld20-ave4"; + status = "disabled"; + reg = <0x65000000 0x8500>; + interrupts = <0 66 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ether_rgmii>; + clocks = <&sys_clk 6>; + resets = <&sys_rst 6>; + phy-mode = "rgmii"; + local-mac-address = [00 00 00 00 00 00]; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + nand: nand@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; @@ -528,3 +630,21 @@ }; #include "uniphier-pinctrl.dtsi" + +&pinctrl_aout1 { + drive-strength = <4>; /* default: 3.5mA */ + + ao1dacck { + pins = "AO1DACCK"; + drive-strength = <5>; /* 5mA */ + }; +}; + +&pinctrl_aoutiec1 { + drive-strength = <4>; /* default: 3.5mA */ + + ao1arc { + pins = "AO1ARC"; + drive-strength = <11>; /* 11mA */ + }; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts index 3c71087298274..c1bb607bd2115 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier PXs3 Reference Board - * - * Copyright (C) 2017 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier PXs3 Reference Board +// +// Copyright (C) 2017 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> /dts-v1/; #include "uniphier-pxs3.dtsi" @@ -77,6 +75,28 @@ status = "okay"; }; +ð0 { + status = "okay"; + phy-handle = <ðphy0>; +}; + +&mdio0 { + ethphy0: ethphy@0 { + reg = <0>; + }; +}; + +ð1 { + status = "okay"; + phy-handle = <ðphy1>; +}; + +&mdio1 { + ethphy1: ethphy@0 { + reg = <0>; + }; +}; + &nand { status = "okay"; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index 234fc58cc5998..7c8f710d9bfa1 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier PXs3 SoC - * - * Copyright (C) 2017 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier PXs3 SoC +// +// Copyright (C) 2017 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/uniphier-gpio.h> @@ -407,6 +405,42 @@ }; }; + eth0: ethernet@65000000 { + compatible = "socionext,uniphier-pxs3-ave4"; + status = "disabled"; + reg = <0x65000000 0x8500>; + interrupts = <0 66 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ether_rgmii>; + clocks = <&sys_clk 6>; + resets = <&sys_rst 6>; + phy-mode = "rgmii"; + local-mac-address = [00 00 00 00 00 00]; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + eth1: ethernet@65200000 { + compatible = "socionext,uniphier-pxs3-ave4"; + status = "disabled"; + reg = <0x65200000 0x8500>; + interrupts = <0 67 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ether1_rgmii>; + clocks = <&sys_clk 7>; + resets = <&sys_rst 7>; + phy-mode = "rgmii"; + local-mac-address = [00 00 00 00 00 00]; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + nand: nand@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi new file mode 100644 index 0000000000000..4331006185bfc --- /dev/null +++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi @@ -0,0 +1,169 @@ +/* + * Spreadtrum SC2731 PMIC dts file + * + * Copyright (C) 2018, Spreadtrum Communications Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +&adi_bus { + sc2731_pmic: pmic@0 { + compatible = "sprd,sc2731"; + reg = <0>; + spi-max-frequency = <26000000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@280 { + compatible = "sprd,sc27xx-rtc", "sprd,sc2731-rtc"; + reg = <0x280>; + interrupt-parent = <&sc2731_pmic>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + }; + + regulators { + compatible = "sprd,sc27xx-regulator"; + + vddarm0: BUCK_CPU0 { + regulator-name = "vddarm0"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1996875>; + regulator-ramp-delay = <25000>; + regulator-always-on; + }; + + vddarm1: BUCK_CPU1 { + regulator-name = "vddarm1"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1996875>; + regulator-ramp-delay = <25000>; + regulator-always-on; + }; + + dcdcrf: BUCK_RF { + regulator-name = "dcdcrf"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2196875>; + regulator-ramp-delay = <25000>; + regulator-enable-ramp-delay = <100>; + regulator-always-on; + }; + + vddcama0: LDO_CAMA0 { + regulator-name = "vddcama0"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + }; + + vddcama1: LDO_CAMA1 { + regulator-name = "vddcama1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddcammot: LDO_CAMMOT { + regulator-name = "vddcammot"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddvldo: LDO_VLDO { + regulator-name = "vddvldo"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddemmccore: LDO_EMMCCORE { + regulator-name = "vddemmccore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + regulator-boot-on; + }; + + vddsdcore: LDO_SDCORE { + regulator-name = "vddsdcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddsdio: LDO_SDIO { + regulator-name = "vddsdio"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddwifipa: LDO_WIFIPA { + regulator-name = "vddwifipa"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddusb33: LDO_USB33 { + regulator-name = "vddusb33"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddcamd0: LDO_CAMD0 { + regulator-name = "vddcamd0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1793750>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddcamd1: LDO_CAMD1 { + regulator-name = "vddcamd1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1793750>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddcon: LDO_CON { + regulator-name = "vddcon"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1793750>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddcamio: LDO_CAMIO { + regulator-name = "vddcamio"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1793750>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddsram: LDO_SRAM { + regulator-name = "vddsram"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1793750>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + regulator-always-on; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts index ae0b28ce63191..985ebb5d157e1 100644 --- a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts +++ b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "sc9860.dtsi" +#include "sc2731.dtsi" / { model = "Spreadtrum SP9860G 3GFHD Board"; @@ -20,6 +21,7 @@ serial1 = &uart1; /* UART console */ serial2 = &uart2; /* Reserved */ serial3 = &uart3; /* for GPS */ + spi0 = &adi_bus; }; memory{ diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi index 328009c4638c1..66a881e6da920 100644 --- a/arch/arm64/boot/dts/sprd/whale2.dtsi +++ b/arch/arm64/boot/dts/sprd/whale2.dtsi @@ -6,6 +6,8 @@ * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +#include <dt-bindings/clock/sprd,sc9860-clk.h> + / { interrupt-parent = <&gic>; #address-cells = <2>; @@ -104,6 +106,85 @@ status = "disabled"; }; }; + + ap-ahb { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ap_dma: dma-controller@20100000 { + compatible = "sprd,sc9860-dma"; + reg = <0 0x20100000 0 0x4000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + #dma-channels = <32>; + clock-names = "enable"; + clocks = <&apahb_gate CLK_DMA_EB>; + }; + }; + + aon { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + adi_bus: spi@40030000 { + compatible = "sprd,sc9860-adi"; + reg = <0 0x40030000 0 0x10000>; + hwlocks = <&hwlock 0>; + hwlock-names = "adi"; + #address-cells = <1>; + #size-cells = <0>; + }; + + timer@40050000 { + compatible = "sprd,sc9860-timer"; + reg = <0 0x40050000 0 0x20>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_32k>; + }; + + hwlock: hwspinlock@40500000 { + compatible = "sprd,hwspinlock-r3p0"; + reg = <0 0x40500000 0 0x1000>; + #hwlock-cells = <1>; + clock-names = "enable"; + clocks = <&aon_gate CLK_SPLK_EB>; + }; + + pin_controller: pinctrl@402a0000 { + compatible = "sprd,sc9860-pinctrl"; + reg = <0 0x402a0000 0 0x10000>; + }; + + watchdog@40310000 { + compatible = "sprd,sp9860-wdt"; + reg = <0 0x40310000 0 0x1000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + timeout-sec = <12>; + clock-names = "enable"; + clocks = <&aon_gate CLK_APCPU_WDG_EB>; + }; + }; + + agcp { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + agcp_dma: dma-controller@41580000 { + compatible = "sprd,sc9860-dma"; + reg = <0 0x41580000 0 0x4000>; + #dma-cells = <1>; + #dma-channels = <32>; + clock-names = "enable", "ashb_eb"; + clocks = <&agcp_gate CLK_AGCP_DMAAP_EB>, + <&agcp_gate CLK_AGCP_AP_ASHB_EB>; + }; + }; }; ext_32k: ext_32k { diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile index a2d67084a5146..c2a0c00272e26 100644 --- a/arch/arm64/boot/dts/xilinx/Makefile +++ b/arch/arm64/boot/dts/xilinx/Makefile @@ -1 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1232-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1254-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1275-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm015-dc1.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm016-dc2.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm017-dc3.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm018-dc4.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm019-dc5.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu100-revC.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revB.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.0.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu106-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu111-revA.dtb diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi new file mode 100644 index 0000000000000..9c09baca7dd78 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi @@ -0,0 +1,213 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Clock specification for Xilinx ZynqMP + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/ { + clk100: clk100 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + clk125: clk125 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clk200: clk200 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + clk250: clk250 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <250000000>; + }; + + clk300: clk300 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <300000000>; + }; + + clk600: clk600 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <600000000>; + }; + + dp_aclk: clock0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-accuracy = <100>; + }; + + dp_aud_clk: clock1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + clock-accuracy = <100>; + }; + + dpdma_clk: dpdma_clk { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <533000000>; + }; + + drm_clock: drm_clock { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <262750000>; + clock-accuracy = <0x64>; + }; +}; + +&can0 { + clocks = <&clk100 &clk100>; +}; + +&can1 { + clocks = <&clk100 &clk100>; +}; + +&fpd_dma_chan1 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan2 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan3 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan4 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan5 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan6 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan7 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan8 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan1 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan2 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan3 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan4 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan5 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan6 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan7 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan8 { + clocks = <&clk600>, <&clk100>; +}; + +&gem0 { + clocks = <&clk125>, <&clk125>, <&clk125>; +}; + +&gem1 { + clocks = <&clk125>, <&clk125>, <&clk125>; +}; + +&gem2 { + clocks = <&clk125>, <&clk125>, <&clk125>; +}; + +&gem3 { + clocks = <&clk125>, <&clk125>, <&clk125>; +}; + +&gpio { + clocks = <&clk100>; +}; + +&i2c0 { + clocks = <&clk100>; +}; + +&i2c1 { + clocks = <&clk100>; +}; + +&sata { + clocks = <&clk250>; +}; + +&sdhci0 { + clocks = <&clk200 &clk200>; +}; + +&sdhci1 { + clocks = <&clk200 &clk200>; +}; + +&spi0 { + clocks = <&clk200 &clk200>; +}; + +&spi1 { + clocks = <&clk200 &clk200>; +}; + +&uart0 { + clocks = <&clk100 &clk100>; +}; + +&uart1 { + clocks = <&clk100 &clk100>; +}; + +&usb0 { + clocks = <&clk250>, <&clk250>; +}; + +&usb1 { + clocks = <&clk250>, <&clk250>; +}; + +&watchdog0 { + clocks = <&clk250>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi index b87b8316f4aca..9f5eedbc2139f 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * clock specification for Xilinx ZynqMP ep108 development board * diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts index bf552674a8341..4b06849116260 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * dts file for Xilinx ZynqMP ep108 development board * @@ -47,7 +48,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@0{ + phy0: phy@0 { reg = <0>; max-speed = <100>; }; @@ -78,10 +79,20 @@ &sata { status = "okay"; ceva,broken-gen2; + /* SATA Phy OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; + ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; + ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>; + ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; + ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; + ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>; }; &sdhci0 { status = "okay"; + bus-width = <8>; }; &sdhci1 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts new file mode 100644 index 0000000000000..0f7b4cf6078ed --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZC1232 + * + * (C) Copyright 2017 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" + +/ { + model = "ZynqMP ZC1232 RevA"; + compatible = "xlnx,zynqmp-zc1232-revA", "xlnx,zynqmp-zc1232", "xlnx,zynqmp"; + + aliases { + serial0 = &uart0; + serial1 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&dcc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts new file mode 100644 index 0000000000000..9092828f92ecd --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZC1254 + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + * Siva Durga Prasad Paladugu <sivadur@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" + +/ { + model = "ZynqMP ZC1254 RevA"; + compatible = "xlnx,zynqmp-zc1254-revA", "xlnx,zynqmp-zc1254", "xlnx,zynqmp"; + + aliases { + serial0 = &uart0; + serial1 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&dcc { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts new file mode 100644 index 0000000000000..4f404c580eec5 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZC1275 + * + * (C) Copyright 2017 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + * Siva Durga Prasad Paladugu <sivadur@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" + +/ { + model = "ZynqMP ZC1275 RevA"; + compatible = "xlnx,zynqmp-zc1275-revA", "xlnx,zynqmp-zc1275", "xlnx,zynqmp"; + + aliases { + serial0 = &uart0; + serial1 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&dcc { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts new file mode 100644 index 0000000000000..9a3e39d1294f1 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP zc1751-xm015-dc1 + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "ZynqMP zc1751-xm015-dc1 RevA"; + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + i2c0 = &i2c1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@0 { + reg = <0>; + }; +}; + +&gpio { + status = "okay"; +}; + + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + eeprom: eeprom@55 { + compatible = "atmel,24c64"; /* 24AA64 */ + reg = <0x55>; + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA phy OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +/* eMMC */ +&sdhci0 { + status = "okay"; + bus-width = <8>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts new file mode 100644 index 0000000000000..11cc67184fa9f --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts @@ -0,0 +1,168 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP zc1751-xm016-dc2 + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "ZynqMP zc1751-xm016-dc2 RevA"; + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; + + aliases { + can0 = &can0; + can1 = &can1; + ethernet0 = &gem2; + i2c0 = &i2c0; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + spi0 = &spi0; + spi1 = &spi1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; +}; + +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem2 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@5 { + reg = <5>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u26: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + /* IRQ not connected */ + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&rtc { + status = "okay"; +}; + +&spi0 { + status = "okay"; + num-cs = <1>; + + spi0_flash0: flash0@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf080", "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + + partition@0 { + label = "data"; + reg = <0x0 0x100000>; + }; + }; +}; + +&spi1 { + status = "okay"; + num-cs = <1>; + + spi1_flash0: flash0@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45db041e", "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <20000000>; + reg = <0>; + + partition@0 { + label = "data"; + reg = <0x0 0x84000>; + }; + }; +}; + +/* ULPI SMSC USB3320 */ +&usb1 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts new file mode 100644 index 0000000000000..7a49deeae647b --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP zc1751-xm017-dc3 + * + * (C) Copyright 2016 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" + +/ { + model = "ZynqMP zc1751-xm017-dc3 RevA"; + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem0; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem0 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@0 { /* VSC8211 */ + reg = <0>; + }; +}; + +&gpio { + status = "okay"; +}; + +/* just eeprom here */ +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u26: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + /* IRQ not connected */ + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +/* eeprom24c02 and SE98A temp chip pca9306 */ +&i2c1 { + status = "okay"; + clock-frequency = <400000>; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA phy OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +&sdhci1 { /* emmc with some settings */ + status = "okay"; +}; + +/* main */ +&uart0 { + status = "okay"; +}; + +/* DB9 */ +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +/* ULPI SMSC USB3320 */ +&usb1 { + status = "okay"; + dr_mode = "host"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts new file mode 100644 index 0000000000000..54c7b4f1d1e46 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP zc1751-xm018-dc4 + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" + +/ { + model = "ZynqMP zc1751-xm018-dc4"; + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem0; + ethernet1 = &gem1; + ethernet2 = &gem2; + ethernet3 = &gem3; + i2c0 = &i2c0; + i2c1 = &i2c1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; +}; + +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&lpd_dma_chan1 { + status = "okay"; +}; + +&lpd_dma_chan2 { + status = "okay"; +}; + +&lpd_dma_chan3 { + status = "okay"; +}; + +&lpd_dma_chan4 { + status = "okay"; +}; + +&lpd_dma_chan5 { + status = "okay"; +}; + +&lpd_dma_chan6 { + status = "okay"; +}; + +&lpd_dma_chan7 { + status = "okay"; +}; + +&lpd_dma_chan8 { + status = "okay"; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy0>; + ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */ + reg = <0>; + }; + ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */ + reg = <7>; + }; + ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */ + reg = <3>; + }; + ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */ + reg = <8>; + }; +}; + +&gem1 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy7>; +}; + +&gem2 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy3>; +}; + +&gem3 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy8>; +}; + +&gpio { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts new file mode 100644 index 0000000000000..b8b5ff13818d3 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP zc1751-xm019-dc5 + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Siva Durga Prasad <siva.durga.paladugu@xilinx.com> + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "ZynqMP zc1751-xm019-dc5 RevA"; + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem1; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci0; + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem1 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@0 { + reg = <0>; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&sdhci0 { + status = "okay"; + no-1-8-v; +}; + +&ttc0 { + status = "okay"; +}; + +&ttc1 { + status = "okay"; +}; + +&ttc2 { + status = "okay"; +}; + +&ttc3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts new file mode 100644 index 0000000000000..3e862a9faf26d --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -0,0 +1,289 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU100 revC + * + * (C) Copyright 2016 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + * Nathalie Chan King Choy + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "ZynqMP ZCU100 RevC"; + compatible = "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100", "xlnx,zynqmp"; + + aliases { + i2c0 = &i2c1; + rtc0 = &rtc; + serial0 = &uart1; + serial1 = &uart0; + serial2 = &dcc; + spi0 = &spi0; + spi1 = &spi1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + sw4 { + label = "sw4"; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + autorepeat; + }; + }; + + leds { + compatible = "gpio-leds"; + ds2 { + label = "ds2"; + gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + ds3 { + label = "ds3"; + gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; /* WLAN tx */ + default-state = "off"; + }; + + ds4 { + label = "ds4"; + gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0rx"; /* WLAN rx */ + default-state = "off"; + }; + + ds5 { + label = "ds5"; + gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + }; + + vbus_det { /* U5 USB5744 VBUS detection via MIO25 */ + label = "vbus_det"; + gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + bt_power { + label = "bt_power"; + gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + wmmcsdio_fixed: fixedregulator-mmcsdio { + compatible = "regulator-fixed"; + regulator-name = "wmmcsdio_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + sdio_pwrseq: sdio_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */ + }; +}; + +&dcc { + status = "okay"; +}; + +&gpio { + status = "okay"; + gpio-line-names = "UART1_TX", "UART1_RX", "UART0_RX", "UART0_TX", "I2C1_SCL", + "I2C1_SDA", "SPI1_SCLK", "WLAN_EN", "BT_EN", "SPI1_CS", + "SPI1_MISO", "SPI1_MOSI", "I2C_MUX_RESET", "SD0_DAT0", "SD0_DAT1", + "SD0_DAT2", "SD0_DAT3", "PS_LED3", "PS_LED2", "PS_LED1", + "PS_LED0", "SD0_CMD", "SD0_CLK", "GPIO_PB", "SD0_DETECT", + "VBUS_DET", "POWER_INT", "DP_AUX", "DP_HPD", "DP_OE", + "DP_AUX_IN", "INA226_ALERT", "PS_FP_PWR_EN", "PL_PWR_EN", "POWER_KILL", + "", "GPIO-A", "GPIO-B", "SPI0_SCLK", "GPIO-C", + "GPIO-D", "SPI0_CS", "SPI0_MISO", "SPI_MOSI", "GPIO-E", + "GPIO-F", "SD1_D0", "SD1_D1", "SD1_D2", "SD1_D3", + "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", + "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", + "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK", + "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", + "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", + "USB_DATA7", "WLAN_IRQ", "PMIC_IRQ", /* MIO end and EMIO start */ + "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", ""; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <100000>; + i2c-mux@75 { /* u11 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2csw_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + label = "LS-I2C0"; + }; + i2csw_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + label = "LS-I2C1"; + }; + i2csw_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + label = "HS-I2C2"; + }; + i2csw_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + label = "HS-I2C3"; + }; + i2csw_4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + + pmic: pmic@5e { /* Custom TI PMIC u33 */ + compatible = "ti,tps65086"; + reg = <0x5e>; + interrupt-parent = <&gpio>; + interrupts = <77 GPIO_ACTIVE_LOW>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + i2csw_5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + /* PS_PMBUS */ + ina226@40 { /* u35 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <10000>; + /* MIO31 is alert which should be routed to PMUFW */ + }; + }; + i2csw_6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* + * Not Connected + */ + }; + i2csw_7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* + * usb5744 (DNP) - U5 + * 100kHz - this is default freq for us + */ + }; + }; +}; + +&rtc { + status = "okay"; +}; + +/* SD0 only supports 3.3V, no level shifter */ +&sdhci0 { + status = "okay"; + no-1-8-v; + broken-cd; /* CD has to be enabled by default */ + disable-wp; +}; + +&sdhci1 { + status = "okay"; + bus-width = <0x4>; + non-removable; + disable-wp; + cap-power-off-card; + mmc-pwrseq = <&sdio_pwrseq>; + vqmmc-supply = <&wmmcsdio_fixed>; + #address-cells = <1>; + #size-cells = <0>; + wlcore: wifi@2 { + compatible = "ti,wl1831"; + reg = <2>; + interrupt-parent = <&gpio>; + interrupts = <76 IRQ_TYPE_EDGE_RISING>; /* MIO76 WLAN_IRQ 1V8 */ + }; +}; + +&spi0 { /* Low Speed connector */ + status = "okay"; + label = "LS-SPI0"; +}; + +&spi1 { /* High Speed connector */ + status = "okay"; + label = "HS-SPI1"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; + +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb1 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts new file mode 100644 index 0000000000000..6647e97edba36 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU102 Rev1.0 + * + * (C) Copyright 2016 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +#include "zynqmp-zcu102-revB.dts" + +/ { + model = "ZynqMP ZCU102 Rev1.0"; + compatible = "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102", "xlnx,zynqmp"; +}; + +&eeprom { + #address-cells = <1>; + #size-cells = <1>; + + board_sn: board-sn@0 { + reg = <0x0 0x14>; + }; + + eth_mac: eth-mac@20 { + reg = <0x20 0x6>; + }; + + board_name: board-name@d0 { + reg = <0xd0 0x6>; + }; + + board_revision: board-revision@e0 { + reg = <0xe0 0x3>; + }; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts new file mode 100644 index 0000000000000..5b4ffe646a9be --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -0,0 +1,548 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU102 RevA + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "ZynqMP ZCU102 RevA"; + compatible = "xlnx,zynqmp-zcu102-revA", "xlnx,zynqmp-zcu102", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + sw19 { + label = "sw19"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_DOWN>; + gpio-key,wakeup; + autorepeat; + }; + }; + + leds { + compatible = "gpio-leds"; + heartbeat_led { + label = "heartbeat"; + gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&can1 { + status = "okay"; +}; + +&dcc { + status = "okay"; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@21 { + reg = <21>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u97: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - PS_GTR_LAN_SEL0 + * 1 - PS_GTR_LAN_SEL1 + * 2 - PS_GTR_LAN_SEL2 + * 3 - PS_GTR_LAN_SEL3 + * 4 - PCI_CLK_DIR_SEL + * 5 - IIC_MUX_RESET_B + * 6 - GEM3_EXP_RESET_B + * 7, 10 - 17 - not connected + */ + + gtr_sel0 { + gpio-hog; + gpios = <0 0>; + output-low; /* PCIE = 0, DP = 1 */ + line-name = "sel0"; + }; + gtr_sel1 { + gpio-hog; + gpios = <1 0>; + output-high; /* PCIE = 0, DP = 1 */ + line-name = "sel1"; + }; + gtr_sel2 { + gpio-hog; + gpios = <2 0>; + output-high; /* PCIE = 0, USB0 = 1 */ + line-name = "sel2"; + }; + gtr_sel3 { + gpio-hog; + gpios = <3 0>; + output-high; /* PCIE = 0, SATA = 1 */ + line-name = "sel3"; + }; + }; + + tca6416_u61: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - VCCPSPLL_EN + * 1 - MGTRAVCC_EN + * 2 - MGTRAVTT_EN + * 3 - VCCPSDDRPLL_EN + * 4 - MIO26_PMU_INPUT_LS + * 5 - PL_PMBUS_ALERT + * 6 - PS_PMBUS_ALERT + * 7 - MAXIM_PMBUS_ALERT + * 10 - PL_DDR4_VTERM_EN + * 11 - PL_DDR4_VPP_2V5_EN + * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON + * 13 - PS_DIMM_SUSPEND_EN + * 14 - PS_DDR4_VTERM_EN + * 15 - PS_DDR4_VPP_2V5_EN + * 16 - 17 - not connected + */ + }; + + i2c-mux@75 { /* u60 */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* PS_PMBUS */ + ina226@40 { /* u76 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <5000>; + }; + ina226@41 { /* u77 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + ina226@42 { /* u78 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u87 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + ina226@44 { /* u85 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + ina226@45 { /* u86 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + ina226@46 { /* u93 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + ina226@47 { /* u88 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + ina226@4a { /* u15 */ + compatible = "ti,ina226"; + reg = <0x4a>; + shunt-resistor = <5000>; + }; + ina226@4b { /* u92 */ + compatible = "ti,ina226"; + reg = <0x4b>; + shunt-resistor = <5000>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* PL_PMBUS */ + ina226@40 { /* u79 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + ina226@41 { /* u81 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + ina226@42 { /* u80 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u84 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + ina226@44 { /* u16 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + ina226@45 { /* u65 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + ina226@46 { /* u74 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + ina226@47 { /* u75 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* MAXIM_PMBUS - 00 */ + max15301@a { /* u46 */ + compatible = "maxim,max15301"; + reg = <0xa>; + }; + max15303@b { /* u4 */ + compatible = "maxim,max15303"; + reg = <0xb>; + }; + max15303@10 { /* u13 */ + compatible = "maxim,max15303"; + reg = <0x10>; + }; + max15301@13 { /* u47 */ + compatible = "maxim,max15301"; + reg = <0x13>; + }; + max15303@14 { /* u7 */ + compatible = "maxim,max15303"; + reg = <0x14>; + }; + max15303@15 { /* u6 */ + compatible = "maxim,max15303"; + reg = <0x15>; + }; + max15303@16 { /* u10 */ + compatible = "maxim,max15303"; + reg = <0x16>; + }; + max15303@17 { /* u9 */ + compatible = "maxim,max15303"; + reg = <0x17>; + }; + max15301@18 { /* u63 */ + compatible = "maxim,max15301"; + reg = <0x18>; + }; + max15303@1a { /* u49 */ + compatible = "maxim,max15303"; + reg = <0x1a>; + }; + max15303@1d { /* u18 */ + compatible = "maxim,max15303"; + reg = <0x1d>; + }; + max15303@20 { /* u8 */ + compatible = "maxim,max15303"; + status = "disabled"; /* unreachable */ + reg = <0x20>; + }; + + max20751@72 { /* u95 */ + compatible = "maxim,max20751"; + reg = <0x72>; + }; + max20751@73 { /* u96 */ + compatible = "maxim,max20751"; + reg = <0x73>; + }; + }; + /* Bus 3 is not connected */ + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + /* PL i2c via PCA9306 - u45 */ + i2c-mux@74 { /* u34 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * IIC_EEPROM 1kB memory which uses 256B blocks + * where every block has different address. + * 0 - 256B address 0x54 + * 256B - 512B address 0x55 + * 512B - 768B address 0x56 + * 768B - 1024B address 0x57 + */ + eeprom: eeprom@54 { /* u23 */ + compatible = "atmel,24c08"; + reg = <0x54>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + si5341: clock-generator@36 { /* SI5341 - u69 */ + reg = <0x36>; + }; + + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + si570_1: clock-generator@5d { /* USER SI570 - u42 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <300000000>; + clock-frequency = <300000000>; + }; + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; /* copy from zc702 */ + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + si5328: clock-generator@69 {/* SI5328 - u20 */ + reg = <0x69>; + /* + * Chip has interrupt present connected to PL + * interrupt-parent = <&>; + * interrupts = <>; + */ + }; + }; + /* 5 - 7 unconnected */ + }; + + i2c-mux@75 { + compatible = "nxp,pca9548"; /* u135 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* HPC0_IIC */ + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* HPC1_IIC */ + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* SYSMON */ + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* DDR4 SODIMM */ + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* SEP 3 */ + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + /* SEP 2 */ + }; + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* SEP 1 */ + }; + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* SEP 0 */ + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + no-1-8-v; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts new file mode 100644 index 0000000000000..af4d86882a5c3 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU102 RevB + * + * (C) Copyright 2016 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +#include "zynqmp-zcu102-revA.dts" + +/ { + model = "ZynqMP ZCU102 RevB"; + compatible = "xlnx,zynqmp-zcu102-revB", "xlnx,zynqmp-zcu102", "xlnx,zynqmp"; +}; + +&gem3 { + phy-handle = <&phyc>; + phyc: phy@c { + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; + /* Cleanup from RevA */ + /delete-node/ phy@21; +}; + +/* Fix collision with u61 */ +&i2c0 { + i2c-mux@75 { + i2c@2 { + max15303@1b { /* u8 */ + compatible = "maxim,max15303"; + reg = <0x1b>; + }; + /delete-node/ max15303@20; + }; + }; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts new file mode 100644 index 0000000000000..d4ad19a38c936 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU104 + * + * (C) Copyright 2017 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "ZynqMP ZCU104 RevA"; + compatible = "xlnx,zynqmp-zcu104-revA", "xlnx,zynqmp-zcu104", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + i2c0 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&can1 { + status = "okay"; +}; + +&dcc { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@c { + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + /* Another connection to this bus via PL i2c via PCA9306 - u45 */ + i2c-mux@74 { /* u34 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * IIC_EEPROM 1kB memory which uses 256B blocks + * where every block has different address. + * 0 - 256B address 0x54 + * 256B - 512B address 0x55 + * 512B - 768B address 0x56 + * 768B - 1024B address 0x57 + */ + eeprom@54 { /* u23 */ + compatible = "atmel,24c08"; + reg = <0x54>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + clock_8t49n287: clock-generator@6c { /* 8T49N287 - u182 */ + reg = <0x6c>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + irps5401_43: irps54012@43 { /* IRPS5401 - u175 */ + reg = <0x43>; + }; + irps5401_4d: irps54012@4d { /* IRPS5401 - u180 */ + reg = <0x4d>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + tca6416_u97: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - IRPS5401_ALERT_B + * 1 - HDMI_8T49N241_INT_ALM + * 2 - MAX6643_OT_B + * 3 - MAX6643_FANFAIL_B + * 5 - IIC_MUX_RESET_B + * 6 - GEM3_EXP_RESET_B + * 7 - FMC_LPC_PRSNT_M2C_B + * 4, 10 - 17 - not connected + */ + }; + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + + /* 3, 6 not connected */ + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + no-1-8-v; + disable-wp; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts new file mode 100644 index 0000000000000..668f7f26716ab --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -0,0 +1,522 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU106 + * + * (C) Copyright 2016, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "ZynqMP ZCU106 RevA"; + compatible = "xlnx,zynqmp-zcu106-revA", "xlnx,zynqmp-zcu106", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + sw19 { + label = "sw19"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_DOWN>; + gpio-key,wakeup; + autorepeat; + }; + }; + + leds { + compatible = "gpio-leds"; + heartbeat_led { + label = "heartbeat"; + gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&can1 { + status = "okay"; +}; + +&dcc { + status = "okay"; +}; + +/* fpd_dma clk 667MHz, lpd_dma 500MHz */ +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@c { + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u97: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; /* interrupt not connected */ + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - SFP_SI5328_INT_ALM + * 1 - HDMI_SI5328_INT_ALM + * 5 - IIC_MUX_RESET_B + * 6 - GEM3_EXP_RESET_B + * 10 - FMC_HPC0_PRSNT_M2C_B + * 11 - FMC_HPC1_PRSNT_M2C_B + * 2-4, 7, 12-17 - not connected + */ + }; + + tca6416_u61: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - VCCPSPLL_EN + * 1 - MGTRAVCC_EN + * 2 - MGTRAVTT_EN + * 3 - VCCPSDDRPLL_EN + * 4 - MIO26_PMU_INPUT_LS + * 5 - PL_PMBUS_ALERT + * 6 - PS_PMBUS_ALERT + * 7 - MAXIM_PMBUS_ALERT + * 10 - PL_DDR4_VTERM_EN + * 11 - PL_DDR4_VPP_2V5_EN + * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON + * 13 - PS_DIMM_SUSPEND_EN + * 14 - PS_DDR4_VTERM_EN + * 15 - PS_DDR4_VPP_2V5_EN + * 16 - 17 - not connected + */ + }; + + i2c-mux@75 { /* u60 */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* PS_PMBUS */ + ina226@40 { /* u76 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <5000>; + }; + ina226@41 { /* u77 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + ina226@42 { /* u78 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u87 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + ina226@44 { /* u85 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + ina226@45 { /* u86 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + ina226@46 { /* u93 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + ina226@47 { /* u88 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + ina226@4a { /* u15 */ + compatible = "ti,ina226"; + reg = <0x4a>; + shunt-resistor = <5000>; + }; + ina226@4b { /* u92 */ + compatible = "ti,ina226"; + reg = <0x4b>; + shunt-resistor = <5000>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* PL_PMBUS */ + ina226@40 { /* u79 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + ina226@41 { /* u81 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + ina226@42 { /* u80 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u84 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + ina226@44 { /* u16 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + ina226@45 { /* u65 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + ina226@46 { /* u74 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + ina226@47 { /* u75 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* MAXIM_PMBUS - 00 */ + max15301@a { /* u46 */ + compatible = "maxim,max15301"; + reg = <0xa>; + }; + max15303@b { /* u4 */ + compatible = "maxim,max15303"; + reg = <0xb>; + }; + max15303@10 { /* u13 */ + compatible = "maxim,max15303"; + reg = <0x10>; + }; + max15301@13 { /* u47 */ + compatible = "maxim,max15301"; + reg = <0x13>; + }; + max15303@14 { /* u7 */ + compatible = "maxim,max15303"; + reg = <0x14>; + }; + max15303@15 { /* u6 */ + compatible = "maxim,max15303"; + reg = <0x15>; + }; + max15303@16 { /* u10 */ + compatible = "maxim,max15303"; + reg = <0x16>; + }; + max15303@17 { /* u9 */ + compatible = "maxim,max15303"; + reg = <0x17>; + }; + max15301@18 { /* u63 */ + compatible = "maxim,max15301"; + reg = <0x18>; + }; + max15303@1a { /* u49 */ + compatible = "maxim,max15303"; + reg = <0x1a>; + }; + max15303@1b { /* u8 */ + compatible = "maxim,max15303"; + reg = <0x1b>; + }; + max15303@1d { /* u18 */ + compatible = "maxim,max15303"; + reg = <0x1d>; + }; + + max20751@72 { /* u95 */ + compatible = "maxim,max20751"; + reg = <0x72>; + }; + max20751@73 { /* u96 */ + compatible = "maxim,max20751"; + reg = <0x73>; + }; + }; + /* Bus 3 is not connected */ + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + /* PL i2c via PCA9306 - u45 */ + i2c-mux@74 { /* u34 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * IIC_EEPROM 1kB memory which uses 256B blocks + * where every block has different address. + * 0 - 256B address 0x54 + * 256B - 512B address 0x55 + * 512B - 768B address 0x56 + * 768B - 1024B address 0x57 + */ + eeprom: eeprom@54 { /* u23 */ + compatible = "atmel,24c08"; + reg = <0x54>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + si5341: clock-generator@36 { /* SI5341 - u69 */ + reg = <0x36>; + }; + + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + si570_1: clock-generator@5d { /* USER SI570 - u42 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <300000000>; + clock-frequency = <300000000>; + }; + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; /* copy from zc702 */ + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + si5328: clock-generator@69 {/* SI5328 - u20 */ + reg = <0x69>; + }; + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; /* FAN controller */ + temp@4c {/* lm96163 - u128 */ + compatible = "national,lm96163"; + reg = <0x4c>; + }; + }; + /* 6 - 7 unconnected */ + }; + + i2c-mux@75 { + compatible = "nxp,pca9548"; /* u135 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* HPC0_IIC */ + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* HPC1_IIC */ + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* SYSMON */ + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* DDR4 SODIMM */ + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* SEP 3 */ + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + /* SEP 2 */ + }; + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* SEP 1 */ + }; + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* SEP 0 */ + }; + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + no-1-8-v; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts new file mode 100644 index 0000000000000..9a9dd6a0142bb --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU111 + * + * (C) Copyright 2017 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "ZynqMP ZCU111 RevA"; + compatible = "xlnx,zynqmp-zcu111-revA", "xlnx,zynqmp-zcu111", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + /* Another 4GB connected to PL */ + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + sw19 { + label = "sw19"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_DOWN>; + gpio-key,wakeup; + autorepeat; + }; + }; + + leds { + compatible = "gpio-leds"; + heartbeat_led { + label = "heartbeat"; + gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&dcc { + status = "okay"; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@c { + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u22: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; /* interrupt not connected */ + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - MAX6643_OT_B + * 1 - MAX6643_FANFAIL_B + * 2 - MIO26_PMU_INPUT_LS + * 4 - SFP_SI5382_INT_ALM + * 5 - IIC_MUX_RESET_B + * 6 - GEM3_EXP_RESET_B + * 10 - FMCP_HSPC_PRSNT_M2C_B + * 11 - CLK_SPI_MUX_SEL0 + * 12 - CLK_SPI_MUX_SEL1 + * 16 - IRPS5401_ALERT_B + * 17 - INA226_PMBUS_ALERT + * 3, 7, 13-15 - not connected + */ + }; + + i2c-mux@75 { /* u23 */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* PS_PMBUS */ + /* PMBUS_ALERT done via pca9544 */ + ina226@40 { /* u67 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + ina226@41 { /* u59 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + ina226@42 { /* u61 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u60 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + ina226@45 { /* u64 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + ina226@46 { /* u69 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <2000>; + }; + ina226@47 { /* u66 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + ina226@48 { /* u65 */ + compatible = "ti,ina226"; + reg = <0x48>; + shunt-resistor = <5000>; + }; + ina226@49 { /* u63 */ + compatible = "ti,ina226"; + reg = <0x49>; + shunt-resistor = <5000>; + }; + ina226@4a { /* u3 */ + compatible = "ti,ina226"; + reg = <0x4a>; + shunt-resistor = <5000>; + }; + ina226@4b { /* u71 */ + compatible = "ti,ina226"; + reg = <0x4b>; + shunt-resistor = <5000>; + }; + ina226@4c { /* u77 */ + compatible = "ti,ina226"; + reg = <0x4c>; + shunt-resistor = <5000>; + }; + ina226@4d { /* u73 */ + compatible = "ti,ina226"; + reg = <0x4d>; + shunt-resistor = <5000>; + }; + ina226@4e { /* u79 */ + compatible = "ti,ina226"; + reg = <0x4e>; + shunt-resistor = <5000>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* NC */ + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + irps5401_43: irps54012@43 { /* IRPS5401 - u53 check these */ + reg = <0x43>; + }; + irps5401_44: irps54012@44 { /* IRPS5401 - u55 */ + reg = <0x44>; + }; + irps5401_45: irps54012@45 { /* IRPS5401 - u57 */ + reg = <0x45>; + }; + /* u68 IR38064 +0 */ + /* u70 IR38060 +1 */ + /* u74 IR38060 +2 */ + /* u75 IR38060 +6 */ + /* J19 header too */ + + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* SYSMON */ + }; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + i2c-mux@74 { /* u26 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * IIC_EEPROM 1kB memory which uses 256B blocks + * where every block has different address. + * 0 - 256B address 0x54 + * 256B - 512B address 0x55 + * 512B - 768B address 0x56 + * 768B - 1024B address 0x57 + */ + eeprom: eeprom@54 { /* u88 */ + compatible = "atmel,24c08"; + reg = <0x54>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + si5341: clock-generator@36 { /* SI5341 - u46 */ + reg = <0x36>; + }; + + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + si570_1: clock-generator@5d { /* USER SI570 - u47 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <300000000>; + clock-frequency = <300000000>; + }; + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_2: clock-generator@5d { /* USER MGT SI570 - u49 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + si5328: clock-generator@69 { /* SI5328 - u48 */ + reg = <0x69>; + }; + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + sc18is603@2f { /* sc18is602 - u93 */ + compatible = "nxp,sc18is603"; + reg = <0x2f>; + /* 4 gpios for CS not handled by driver */ + /* + * USB2ANY cable or + * LMK04208 - u90 or + * LMX2594 - u102 or + * LMX2594 - u103 or + * LMX2594 - u104 + */ + }; + }; + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* FMC connector */ + }; + /* 7 NC */ + }; + + i2c-mux@75 { + compatible = "nxp,pca9548"; /* u27 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* FMCP_HSPC_IIC */ + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* NC */ + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* SYSMON */ + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* DDR4 SODIMM */ + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* SFP3 */ + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + /* SFP2 */ + }; + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* SFP1 */ + }; + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* SFP0 */ + }; + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + no-1-8-v; +}; + +&uart0 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 7665fbddff280..a091e6f030145 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * dts file for Xilinx ZynqMP * @@ -355,7 +356,7 @@ }; gem0: ethernet@ff0b0000 { - compatible = "cdns,gem"; + compatible = "cdns,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 57 4>, <0 57 4>; @@ -366,7 +367,7 @@ }; gem1: ethernet@ff0c0000 { - compatible = "cdns,gem"; + compatible = "cdns,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 59 4>, <0 59 4>; @@ -377,7 +378,7 @@ }; gem2: ethernet@ff0d0000 { - compatible = "cdns,gem"; + compatible = "cdns,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 61 4>, <0 61 4>; @@ -388,7 +389,7 @@ }; gem3: ethernet@ff0e0000 { - compatible = "cdns,gem"; + compatible = "cdns,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 63 4>, <0 63 4>; @@ -439,10 +440,10 @@ device_type = "pci"; interrupt-parent = <&gic>; interrupts = <0 118 4>, - <0 117 4>, - <0 116 4>, - <0 115 4>, /* MSI_1 [63...32] */ - <0 114 4>; /* MSI_0 [31...0] */ + <0 117 4>, + <0 116 4>, + <0 115 4>, /* MSI_1 [63...32] */ + <0 114 4>; /* MSI_0 [31...0] */ interrupt-names = "misc", "dummy", "intx", "msi1", "msi0"; msi-parent = <&pcie>; |