block: sed-opal: ioctl for writing to shadow mbr

Allow modification of the shadow mbr. If the shadow mbr is not marked as
done, this data will be presented read only as the device content. Only
after marking the shadow mbr as done and unlocking a locking range the
actual content is accessible.

Co-authored-by: David Kozub <zub@linux.fjfi.cvut.cz>
Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz>
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

1 files changed, 89 insertions, 2 deletions

diff --git a/block/sed-opal.c b/block/sed-opal.c
index f94f359dd6880..b02ef2ff0d75a 100644
--- a/block/sed-opal.c
+++ b/block/sed-opal.c
@@ -26,6 +26,9 @@
 #define IO_BUFFER_LENGTH 2048
 #define MAX_TOKS 64
 
+/* Number of bytes needed by cmd_finalize. */
+#define CMD_FINALIZE_BYTES_NEEDED 7
+
 struct opal_step {
 	int (*fn)(struct opal_dev *dev, void *data);
 	void *data;
@@ -523,12 +526,17 @@ static int opal_discovery0_step(struct opal_dev *dev)
 	return execute_step(dev, &discovery0_step, 0);
 }
 
+static size_t remaining_size(struct opal_dev *cmd)
+{
+	return IO_BUFFER_LENGTH - cmd->pos;
+}
+
 static bool can_add(int *err, struct opal_dev *cmd, size_t len)
 {
 	if (*err)
 		return false;
 
-	if (len > IO_BUFFER_LENGTH || cmd->pos > IO_BUFFER_LENGTH - len) {
+	if (remaining_size(cmd) < len) {
 		pr_debug("Error adding %zu bytes: end of buffer.\n", len);
 		*err = -ERANGE;
 		return false;
@@ -674,7 +682,11 @@ static int cmd_finalize(struct opal_dev *cmd, u32 hsn, u32 tsn)
 	struct opal_header *hdr;
 	int err = 0;
 
-	/* close the parameter list opened from cmd_start */
+	/*
+	 * Close the parameter list opened from cmd_start.
+	 * The number of bytes added must be equal to
+	 * CMD_FINALIZE_BYTES_NEEDED.
+	 */
 	add_token_u8(&err, cmd, OPAL_ENDLIST);
 
 	add_token_u8(&err, cmd, OPAL_ENDOFDATA);
@@ -1536,6 +1548,58 @@ static int set_mbr_enable_disable(struct opal_dev *dev, void *data)
 	return finalize_and_send(dev, parse_and_check_status);
 }
 
+static int write_shadow_mbr(struct opal_dev *dev, void *data)
+{
+	struct opal_shadow_mbr *shadow = data;
+	const u8 __user *src;
+	u8 *dst;
+	size_t off = 0;
+	u64 len;
+	int err = 0;
+
+	/* do the actual transmission(s) */
+	src = (u8 __user *)(uintptr_t)shadow->data;
+	while (off < shadow->size) {
+		err = cmd_start(dev, opaluid[OPAL_MBR], opalmethod[OPAL_SET]);
+		add_token_u8(&err, dev, OPAL_STARTNAME);
+		add_token_u8(&err, dev, OPAL_WHERE);
+		add_token_u64(&err, dev, shadow->offset + off);
+		add_token_u8(&err, dev, OPAL_ENDNAME);
+
+		add_token_u8(&err, dev, OPAL_STARTNAME);
+		add_token_u8(&err, dev, OPAL_VALUES);
+
+		/*
+		 * The bytestring header is either 1 or 2 bytes, so assume 2.
+		 * There also needs to be enough space to accommodate the
+		 * trailing OPAL_ENDNAME (1 byte) and tokens added by
+		 * cmd_finalize.
+		 */
+		len = min(remaining_size(dev) - (2+1+CMD_FINALIZE_BYTES_NEEDED),
+			  (size_t)(shadow->size - off));
+		pr_debug("MBR: write bytes %zu+%llu/%llu\n",
+			 off, len, shadow->size);
+
+		dst = add_bytestring_header(&err, dev, len);
+		if (!dst)
+			break;
+		if (copy_from_user(dst, src + off, len))
+			err = -EFAULT;
+		dev->pos += len;
+
+		add_token_u8(&err, dev, OPAL_ENDNAME);
+		if (err)
+			break;
+
+		err = finalize_and_send(dev, parse_and_check_status);
+		if (err)
+			break;
+
+		off += len;
+	}
+	return err;
+}
+
 static int generic_pw_cmd(u8 *key, size_t key_len, u8 *cpin_uid,
 			  struct opal_dev *dev)
 {
@@ -2013,6 +2077,26 @@ static int opal_set_mbr_done(struct opal_dev *dev,
 	return ret;
 }
 
+static int opal_write_shadow_mbr(struct opal_dev *dev,
+				 struct opal_shadow_mbr *info)
+{
+	const struct opal_step mbr_steps[] = {
+		{ start_admin1LSP_opal_session, &info->key },
+		{ write_shadow_mbr, info },
+		{ end_opal_session, }
+	};
+	int ret;
+
+	if (info->size == 0)
+		return 0;
+
+	mutex_lock(&dev->dev_lock);
+	setup_opal_dev(dev);
+	ret = execute_steps(dev, mbr_steps, ARRAY_SIZE(mbr_steps));
+	mutex_unlock(&dev->dev_lock);
+	return ret;
+}
+
 static int opal_save(struct opal_dev *dev, struct opal_lock_unlock *lk_unlk)
 {
 	struct opal_suspend_data *suspend;
@@ -2337,6 +2421,9 @@ int sed_ioctl(struct opal_dev *dev, unsigned int cmd, void __user *arg)
 	case IOC_OPAL_MBR_DONE:
 		ret = opal_set_mbr_done(dev, p);
 		break;
+	case IOC_OPAL_WRITE_SHADOW_MBR:
+		ret = opal_write_shadow_mbr(dev, p);
+		break;
 	case IOC_OPAL_ERASE_LR:
 		ret = opal_erase_locking_range(dev, p);
 		break;