diff options
| author | Bjorn Andersson <bjorn.andersson@linaro.org> | 2017-08-14 15:46:18 -0700 |
|---|---|---|
| committer | Andy Gross <andy.gross@linaro.org> | 2017-10-11 23:48:27 -0500 |
| commit | 8c1b7dc9ba2294c6dbd1870a3d2e534bfda3047a (patch) | |
| tree | 8d9823b880adb03cdf422d6773c720b79c6233e5 /drivers/firmware/qcom_scm.h | |
| parent | 4e659dbe2d02a56ca0df25c77e099760252a329c (diff) | |
| download | linux-0-day-8c1b7dc9ba2294c6dbd1870a3d2e534bfda3047a.tar.gz linux-0-day-8c1b7dc9ba2294c6dbd1870a3d2e534bfda3047a.tar.xz | |
firmware: qcom: scm: Expose download-mode control
In order to aid post-mortem debugging the Qualcomm platforms provide a
"memory download mode", where the boot loader will provide an interface
for custom tools to "download" the content of RAM to a host machine.
The mode is triggered by writing a magic value somewhere in RAM, that is
read in the boot code path after a warm-restart. Two mechanism for
setting this magic value are supported in modern platforms; a direct SCM
call to enable the mode or through a secure io write of a magic value.
In order for a normal reboot not to trigger "download mode" the magic
must be cleared during a clean reboot.
Download mode has to be enabled by including qcom_scm.download_mode=1 on
the command line.
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Diffstat (limited to 'drivers/firmware/qcom_scm.h')
| -rw-r--r-- | drivers/firmware/qcom_scm.h | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h index a60e4b9b13943..83f171c239430 100644 --- a/drivers/firmware/qcom_scm.h +++ b/drivers/firmware/qcom_scm.h @@ -14,9 +14,11 @@ #define QCOM_SCM_SVC_BOOT 0x1 #define QCOM_SCM_BOOT_ADDR 0x1 +#define QCOM_SCM_SET_DLOAD_MODE 0x10 #define QCOM_SCM_BOOT_ADDR_MC 0x11 #define QCOM_SCM_SET_REMOTE_STATE 0xa extern int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id); +extern int __qcom_scm_set_dload_mode(struct device *dev, bool enable); #define QCOM_SCM_FLAG_HLOS 0x01 #define QCOM_SCM_FLAG_COLDBOOT_MC 0x02 |