diff options
| -rw-r--r-- | Documentation/ABI/testing/configfs-spear-pcie-gadget | 31 | ||||
| -rw-r--r-- | Documentation/misc-devices/spear-pcie-gadget.txt | 130 | ||||
| -rw-r--r-- | drivers/misc/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/misc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/misc/spear13xx_pcie_gadget.c | 908 |
5 files changed, 1080 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/configfs-spear-pcie-gadget b/Documentation/ABI/testing/configfs-spear-pcie-gadget new file mode 100644 index 0000000000000..875988146a63c --- /dev/null +++ b/Documentation/ABI/testing/configfs-spear-pcie-gadget @@ -0,0 +1,31 @@ +What: /config/pcie-gadget +Date: Feb 2011 +KernelVersion: 2.6.37 +Contact: Pratyush Anand <pratyush.anand@st.com> +Description: + + Interface is used to configure selected dual mode PCIe controller + as device and then program its various registers to configure it + as a particular device type. + This interfaces can be used to show spear's PCIe device capability. + + Nodes are only visible when configfs is mounted. To mount configfs + in /config directory use: + # mount -t configfs none /config/ + + For nth PCIe Device Controller + /config/pcie-gadget.n/ + link ... used to enable ltssm and read its status. + int_type ...used to configure and read type of supported + interrupt + no_of_msi ... used to configure number of MSI vector needed and + to read no of MSI granted. + inta ... write 1 to assert INTA and 0 to de-assert. + send_msi ... write MSI vector to be sent. + vendor_id ... used to write and read vendor id (hex) + device_id ... used to write and read device id (hex) + bar0_size ... used to write and read bar0_size + bar0_address ... used to write and read bar0 mapped area in hex. + bar0_rw_offset ... used to write and read offset of bar0 where + bar0_data will be written or read. + bar0_data ... used to write and read data at bar0_rw_offset. diff --git a/Documentation/misc-devices/spear-pcie-gadget.txt b/Documentation/misc-devices/spear-pcie-gadget.txt new file mode 100644 index 0000000000000..02c13ef5e908a --- /dev/null +++ b/Documentation/misc-devices/spear-pcie-gadget.txt @@ -0,0 +1,130 @@ +Spear PCIe Gadget Driver: + +Author +============= +Pratyush Anand (pratyush.anand@st.com) + +Location +============ +driver/misc/spear13xx_pcie_gadget.c + +Supported Chip: +=================== +SPEAr1300 +SPEAr1310 + +Menuconfig option: +========================== +Device Drivers + Misc devices + PCIe gadget support for SPEAr13XX platform +purpose +=========== +This driver has several nodes which can be read/written by configfs interface. +Its main purpose is to configure selected dual mode PCIe controller as device +and then program its various registers to configure it as a particular device +type. This driver can be used to show spear's PCIe device capability. + +Description of different nodes: +================================= + +read behavior of nodes: +------------------------------ +link :gives ltssm status. +int_type :type of supported interrupt +no_of_msi :zero if MSI is not enabled by host. A positive value is the + number of MSI vector granted. +vendor_id :returns programmed vendor id (hex) +device_id :returns programmed device id(hex) +bar0_size: :returns size of bar0 in hex. +bar0_address :returns address of bar0 mapped area in hex. +bar0_rw_offset :returns offset of bar0 for which bar0_data will return value. +bar0_data :returns data at bar0_rw_offset. + +write behavior of nodes: +------------------------------ +link :write UP to enable ltsmm DOWN to disable +int_type :write interrupt type to be configured and (int_type could be + INTA, MSI or NO_INT). Select MSI only when you have programmed + no_of_msi node. +no_of_msi :number of MSI vector needed. +inta :write 1 to assert INTA and 0 to de-assert. +send_msi :write MSI vector to be sent. +vendor_id :write vendor id(hex) to be programmed. +device_id :write device id(hex) to be programmed. +bar0_size :write size of bar0 in hex. default bar0 size is 1000 (hex) + bytes. +bar0_address :write address of bar0 mapped area in hex. (default mapping of + bar0 is SYSRAM1(E0800000). Always program bar size before bar + address. Kernel might modify bar size and address for alignment, so + read back bar size and address after writing to cross check. +bar0_rw_offset :write offset of bar0 for which bar0_data will write value. +bar0_data :write data to be written at bar0_rw_offset. + +Node programming example +=========================== +Program all PCIe registers in such a way that when this device is connected +to the PCIe host, then host sees this device as 1MB RAM. +#mount -t configfs none /Config +For nth PCIe Device Controller +# cd /config/pcie_gadget.n/ +Now you have all the nodes in this directory. +program vendor id as 0x104a +# echo 104A >> vendor_id + +program device id as 0xCD80 +# echo CD80 >> device_id + +program BAR0 size as 1MB +# echo 100000 >> bar0_size + +check for programmed bar0 size +# cat bar0_size + +Program BAR0 Address as DDR (0x2100000). This is the physical address of +memory, which is to be made visible to PCIe host. Similarly any other peripheral +can also be made visible to PCIe host. E.g., if you program base address of UART +as BAR0 address then when this device will be connected to a host, it will be +visible as UART. +# echo 2100000 >> bar0_address + +program interrupt type : INTA +# echo INTA >> int_type + +go for link up now. +# echo UP >> link + +It will have to be insured that, once link up is done on gadget, then only host +is initialized and start to search PCIe devices on its port. + +/*wait till link is up*/ +# cat link +wait till it returns UP. + +To assert INTA +# echo 1 >> inta + +To de-assert INTA +# echo 0 >> inta + +if MSI is to be used as interrupt, program no of msi vector needed (say4) +# echo 4 >> no_of_msi + +select MSI as interrupt type +# echo MSI >> int_type + +go for link up now +# echo UP >> link + +wait till link is up +# cat link +An application can repetitively read this node till link is found UP. It can +sleep between two read. + +wait till msi is enabled +# cat no_of_msi +Should return 4 (number of requested MSI vector) + +to send msi vector 2 +# echo 2 >> send_msi +#cd - diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 203500d9b8483..4e007c6a4b446 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -402,6 +402,16 @@ config DS1682 This driver can also be built as a module. If so, the module will be called ds1682. +config SPEAR13XX_PCIE_GADGET + bool "PCIe gadget support for SPEAr13XX platform" + depends on ARCH_SPEAR13XX + default n + help + This option enables gadget support for PCIe controller. If + board file defines any controller as PCIe endpoint then a sysfs + entry will be created for that controller. User can use these + sysfs node to configure PCIe EP as per his requirements. + config TI_DAC7512 tristate "Texas Instruments DAC7512" depends on SPI && SYSFS diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 804f421bc0794..f5468602961f8 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/ obj-$(CONFIG_HMC6352) += hmc6352.o obj-y += eeprom/ obj-y += cb710/ +obj-$(CONFIG_SPEAR13XX_PCIE_GADGET) += spear13xx_pcie_gadget.o obj-$(CONFIG_VMWARE_BALLOON) += vmw_balloon.o obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o obj-$(CONFIG_PCH_PHUB) += pch_phub.o diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c new file mode 100644 index 0000000000000..ec3b8c911833d --- /dev/null +++ b/drivers/misc/spear13xx_pcie_gadget.c @@ -0,0 +1,908 @@ +/* + * drivers/misc/spear13xx_pcie_gadget.c + * + * Copyright (C) 2010 ST Microelectronics + * Pratyush Anand<pratyush.anand@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pci_regs.h> +#include <linux/configfs.h> +#include <mach/pcie.h> +#include <mach/misc_regs.h> + +#define IN0_MEM_SIZE (200 * 1024 * 1024 - 1) +/* In current implementation address translation is done using IN0 only. + * So IN1 start address and IN0 end address has been kept same +*/ +#define IN1_MEM_SIZE (0 * 1024 * 1024 - 1) +#define IN_IO_SIZE (20 * 1024 * 1024 - 1) +#define IN_CFG0_SIZE (12 * 1024 * 1024 - 1) +#define IN_CFG1_SIZE (12 * 1024 * 1024 - 1) +#define IN_MSG_SIZE (12 * 1024 * 1024 - 1) +/* Keep default BAR size as 4K*/ +/* AORAM would be mapped by default*/ +#define INBOUND_ADDR_MASK (SPEAR13XX_SYSRAM1_SIZE - 1) + +#define INT_TYPE_NO_INT 0 +#define INT_TYPE_INTX 1 +#define INT_TYPE_MSI 2 +struct spear_pcie_gadget_config { + void __iomem *base; + void __iomem *va_app_base; + void __iomem *va_dbi_base; + char int_type[10]; + ulong requested_msi; + ulong configured_msi; + ulong bar0_size; + ulong bar0_rw_offset; + void __iomem *va_bar0_address; +}; + +struct pcie_gadget_target { + struct configfs_subsystem subsys; + struct spear_pcie_gadget_config config; +}; + +struct pcie_gadget_target_attr { + struct configfs_attribute attr; + ssize_t (*show)(struct spear_pcie_gadget_config *config, + char *buf); + ssize_t (*store)(struct spear_pcie_gadget_config *config, + const char *buf, + size_t count); +}; + +static void enable_dbi_access(struct pcie_app_reg __iomem *app_reg) +{ + /* Enable DBI access */ + writel(readl(&app_reg->slv_armisc) | (1 << AXI_OP_DBI_ACCESS_ID), + &app_reg->slv_armisc); + writel(readl(&app_reg->slv_awmisc) | (1 << AXI_OP_DBI_ACCESS_ID), + &app_reg->slv_awmisc); + +} + +static void disable_dbi_access(struct pcie_app_reg __iomem *app_reg) +{ + /* disable DBI access */ + writel(readl(&app_reg->slv_armisc) & ~(1 << AXI_OP_DBI_ACCESS_ID), + &app_reg->slv_armisc); + writel(readl(&app_reg->slv_awmisc) & ~(1 << AXI_OP_DBI_ACCESS_ID), + &app_reg->slv_awmisc); + +} + +static void spear_dbi_read_reg(struct spear_pcie_gadget_config *config, + int where, int size, u32 *val) +{ + struct pcie_app_reg __iomem *app_reg = config->va_app_base; + ulong va_address; + + /* Enable DBI access */ + enable_dbi_access(app_reg); + + va_address = (ulong)config->va_dbi_base + (where & ~0x3); + + *val = readl(va_address); + + if (size == 1) + *val = (*val >> (8 * (where & 3))) & 0xff; + else if (size == 2) + *val = (*val >> (8 * (where & 3))) & 0xffff; + + /* Disable DBI access */ + disable_dbi_access(app_reg); +} + +static void spear_dbi_write_reg(struct spear_pcie_gadget_config *config, + int where, int size, u32 val) +{ + struct pcie_app_reg __iomem *app_reg = config->va_app_base; + ulong va_address; + + /* Enable DBI access */ + enable_dbi_access(app_reg); + + va_address = (ulong)config->va_dbi_base + (where & ~0x3); + + if (size == 4) + writel(val, va_address); + else if (size == 2) + writew(val, va_address + (where & 2)); + else if (size == 1) + writeb(val, va_address + (where & 3)); + + /* Disable DBI access */ + disable_dbi_access(app_reg); +} + +#define PCI_FIND_CAP_TTL 48 + +static int pci_find_own_next_cap_ttl(struct spear_pcie_gadget_config *config, + u32 pos, int cap, int *ttl) +{ + u32 id; + + while ((*ttl)--) { + spear_dbi_read_reg(config, pos, 1, &pos); + if (pos < 0x40) + break; + pos &= ~3; + spear_dbi_read_reg(config, pos + PCI_CAP_LIST_ID, 1, &id); + if (id == 0xff) + break; + if (id == cap) + return pos; + pos += PCI_CAP_LIST_NEXT; + } + return 0; +} + +static int pci_find_own_next_cap(struct spear_pcie_gadget_config *config, + u32 pos, int cap) +{ + int ttl = PCI_FIND_CAP_TTL; + + return pci_find_own_next_cap_ttl(config, pos, cap, &ttl); +} + +static int pci_find_own_cap_start(struct spear_pcie_gadget_config *config, + u8 hdr_type) +{ + u32 status; + + spear_dbi_read_reg(config, PCI_STATUS, 2, &status); + if (!(status & PCI_STATUS_CAP_LIST)) + return 0; + + switch (hdr_type) { + case PCI_HEADER_TYPE_NORMAL: + case PCI_HEADER_TYPE_BRIDGE: + return PCI_CAPABILITY_LIST; + case PCI_HEADER_TYPE_CARDBUS: + return PCI_CB_CAPABILITY_LIST; + default: + return 0; + } + + return 0; +} + +/* + * Tell if a device supports a given PCI capability. + * Returns the address of the requested capability structure within the + * device's PCI configuration space or 0 in case the device does not + * support it. Possible values for @cap: + * + * %PCI_CAP_ID_PM Power Management + * %PCI_CAP_ID_AGP Accelerated Graphics Port + * %PCI_CAP_ID_VPD Vital Product Data + * %PCI_CAP_ID_SLOTID Slot Identification + * %PCI_CAP_ID_MSI Message Signalled Interrupts + * %PCI_CAP_ID_CHSWP CompactPCI HotSwap + * %PCI_CAP_ID_PCIX PCI-X + * %PCI_CAP_ID_EXP PCI Express + */ +static int pci_find_own_capability(struct spear_pcie_gadget_config *config, + int cap) +{ + u32 pos; + u32 hdr_type; + + spear_dbi_read_reg(config, PCI_HEADER_TYPE, 1, &hdr_type); + + pos = pci_find_own_cap_start(config, hdr_type); + if (pos) + pos = pci_find_own_next_cap(config, pos, cap); + + return pos; +} + +static irqreturn_t spear_pcie_gadget_irq(int irq, void *dev_id) +{ + return 0; +} + +/* + * configfs interfaces show/store functions + */ +static ssize_t pcie_gadget_show_link( + struct spear_pcie_gadget_config *config, + char *buf) +{ + struct pcie_app_reg __iomem *app_reg = config->va_app_base; + + if (readl(&app_reg->app_status_1) & ((u32)1 << XMLH_LINK_UP_ID)) + return sprintf(buf, "UP"); + else + return sprintf(buf, "DOWN"); +} + +static ssize_t pcie_gadget_store_link( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + struct pcie_app_reg __iomem *app_reg = config->va_app_base; + + if (sysfs_streq(buf, "UP")) + writel(readl(&app_reg->app_ctrl_0) | (1 << APP_LTSSM_ENABLE_ID), + &app_reg->app_ctrl_0); + else if (sysfs_streq(buf, "DOWN")) + writel(readl(&app_reg->app_ctrl_0) + & ~(1 << APP_LTSSM_ENABLE_ID), + &app_reg->app_ctrl_0); + else + return -EINVAL; + return count; +} + +static ssize_t pcie_gadget_show_int_type( + struct spear_pcie_gadget_config *config, + char *buf) +{ + return sprintf(buf, "%s", config->int_type); +} + +static ssize_t pcie_gadget_store_int_type( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + u32 cap, vec, flags; + ulong vector; + + if (sysfs_streq(buf, "INTA")) + spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1); + + else if (sysfs_streq(buf, "MSI")) { + vector = config->requested_msi; + vec = 0; + while (vector > 1) { + vector /= 2; + vec++; + } + spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 0); + cap = pci_find_own_capability(config, PCI_CAP_ID_MSI); + spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags); + flags &= ~PCI_MSI_FLAGS_QMASK; + flags |= vec << 1; + spear_dbi_write_reg(config, cap + PCI_MSI_FLAGS, 1, flags); + } else + return -EINVAL; + + strcpy(config->int_type, buf); + + return count; +} + +static ssize_t pcie_gadget_show_no_of_msi( + struct spear_pcie_gadget_config *config, + char *buf) +{ + struct pcie_app_reg __iomem *app_reg = config->va_app_base; + u32 cap, vec, flags; + ulong vector; + + if ((readl(&app_reg->msg_status) & (1 << CFG_MSI_EN_ID)) + != (1 << CFG_MSI_EN_ID)) + vector = 0; + else { + cap = pci_find_own_capability(config, PCI_CAP_ID_MSI); + spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags); + flags &= ~PCI_MSI_FLAGS_QSIZE; + vec = flags >> 4; + vector = 1; + while (vec--) + vector *= 2; + } + config->configured_msi = vector; + + return sprintf(buf, "%lu", vector); +} + +static ssize_t pcie_gadget_store_no_of_msi( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + if (strict_strtoul(buf, 0, &config->requested_msi)) + return -EINVAL; + if (config->requested_msi > 32) + config->requested_msi = 32; + + return count; +} + +static ssize_t pcie_gadget_store_inta( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + struct pcie_app_reg __iomem *app_reg = config->va_app_base; + ulong en; + + if (strict_strtoul(buf, 0, &en)) + return -EINVAL; + + if (en) + writel(readl(&app_reg->app_ctrl_0) | (1 << SYS_INT_ID), + &app_reg->app_ctrl_0); + else + writel(readl(&app_reg->app_ctrl_0) & ~(1 << SYS_INT_ID), + &app_reg->app_ctrl_0); + + return count; +} + +static ssize_t pcie_gadget_store_send_msi( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + struct pcie_app_reg __iomem *app_reg = config->va_app_base; + ulong vector; + u32 ven_msi; + + if (strict_strtoul(buf, 0, &vector)) + return -EINVAL; + + if (!config->configured_msi) + return -EINVAL; + + if (vector >= config->configured_msi) + return -EINVAL; + + ven_msi = readl(&app_reg->ven_msi_1); + ven_msi &= ~VEN_MSI_FUN_NUM_MASK; + ven_msi |= 0 << VEN_MSI_FUN_NUM_ID; + ven_msi &= ~VEN_MSI_TC_MASK; + ven_msi |= 0 << VEN_MSI_TC_ID; + ven_msi &= ~VEN_MSI_VECTOR_MASK; + ven_msi |= vector << VEN_MSI_VECTOR_ID; + + /* generating interrupt for msi vector */ + ven_msi |= VEN_MSI_REQ_EN; + writel(ven_msi, &app_reg->ven_msi_1); + udelay(1); + ven_msi &= ~VEN_MSI_REQ_EN; + writel(ven_msi, &app_reg->ven_msi_1); + + return count; +} + +static ssize_t pcie_gadget_show_vendor_id( + struct spear_pcie_gadget_config *config, + char *buf) +{ + u32 id; + + spear_dbi_read_reg(config, PCI_VENDOR_ID, 2, &id); + + return sprintf(buf, "%x", id); +} + +static ssize_t pcie_gadget_store_vendor_id( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + ulong id; + + if (strict_strtoul(buf, 0, &id)) + return -EINVAL; + + spear_dbi_write_reg(config, PCI_VENDOR_ID, 2, id); + + return count; +} + +static ssize_t pcie_gadget_show_device_id( + struct spear_pcie_gadget_config *config, + char *buf) +{ + u32 id; + + spear_dbi_read_reg(config, PCI_DEVICE_ID, 2, &id); + + return sprintf(buf, "%x", id); +} + +static ssize_t pcie_gadget_store_device_id( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + ulong id; + + if (strict_strtoul(buf, 0, &id)) + return -EINVAL; + + spear_dbi_write_reg(config, PCI_DEVICE_ID, 2, id); + + return count; +} + +static ssize_t pcie_gadget_show_bar0_size( + struct spear_pcie_gadget_config *config, + char *buf) +{ + return sprintf(buf, "%lx", config->bar0_size); +} + +static ssize_t pcie_gadget_store_bar0_size( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + ulong size; + u32 pos, pos1; + u32 no_of_bit = 0; + + if (strict_strtoul(buf, 0, &size)) + return -EINVAL; + /* min bar size is 256 */ + if (size <= 0x100) + size = 0x100; + /* max bar size is 1MB*/ + else if (size >= 0x100000) + size = 0x100000; + else { + pos = 0; + pos1 = 0; + while (pos < 21) { + pos = find_next_bit((ulong *)&size, 21, pos); + if (pos != 21) + pos1 = pos + 1; + pos++; + no_of_bit++; + } + if (no_of_bit == 2) + pos1--; + + size = 1 << pos1; + } + config->bar0_size = size; + spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, size - 1); + + return count; +} + +static ssize_t pcie_gadget_show_bar0_address( + struct spear_pcie_gadget_config *config, + char *buf) +{ + struct pcie_app_reg __iomem *app_reg = config->va_app_base; + + u32 address = readl(&app_reg->pim0_mem_addr_start); + + return sprintf(buf, "%x", address); +} + +static ssize_t pcie_gadget_store_bar0_address( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + struct pcie_app_reg __iomem *app_reg = config->va_app_base; + ulong address; + + if (strict_strtoul(buf, 0, &address)) + return -EINVAL; + + address &= ~(config->bar0_size - 1); + if (config->va_bar0_address) + iounmap(config->va_bar0_address); + config->va_bar0_address = ioremap(address, config->bar0_size); + if (!config->va_bar0_address) + return -ENOMEM; + + writel(address, &app_reg->pim0_mem_addr_start); + + return count; +} + +static ssize_t pcie_gadget_show_bar0_rw_offset( + struct spear_pcie_gadget_config *config, + char *buf) +{ + return sprintf(buf, "%lx", config->bar0_rw_offset); +} + +static ssize_t pcie_gadget_store_bar0_rw_offset( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + ulong offset; + + if (strict_strtoul(buf, 0, &offset)) + return -EINVAL; + + if (offset % 4) + return -EINVAL; + + config->bar0_rw_offset = offset; + + return count; +} + +static ssize_t pcie_gadget_show_bar0_data( + struct spear_pcie_gadget_config *config, + char *buf) +{ + ulong data; + + if (!config->va_bar0_address) + return -ENOMEM; + + data = readl((ulong)config->va_bar0_address + config->bar0_rw_offset); + + return sprintf(buf, "%lx", data); +} + +static ssize_t pcie_gadget_store_bar0_data( + struct spear_pcie_gadget_config *config, + const char *buf, size_t count) +{ + ulong data; + + if (strict_strtoul(buf, 0, &data)) + return -EINVAL; + + if (!config->va_bar0_address) + return -ENOMEM; + + writel(data, (ulong)config->va_bar0_address + config->bar0_rw_offset); + + return count; +} + +/* + * Attribute definitions. + */ + +#define PCIE_GADGET_TARGET_ATTR_RO(_name) \ +static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \ + __CONFIGFS_ATTR(_name, S_IRUGO, pcie_gadget_show_##_name, NULL) + +#define PCIE_GADGET_TARGET_ATTR_WO(_name) \ +static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \ + __CONFIGFS_ATTR(_name, S_IWUSR, NULL, pcie_gadget_store_##_name) + +#define PCIE_GADGET_TARGET_ATTR_RW(_name) \ +static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \ + __CONFIGFS_ATTR(_name, S_IRUGO | S_IWUSR, pcie_gadget_show_##_name, \ + pcie_gadget_store_##_name) +PCIE_GADGET_TARGET_ATTR_RW(link); +PCIE_GADGET_TARGET_ATTR_RW(int_type); +PCIE_GADGET_TARGET_ATTR_RW(no_of_msi); +PCIE_GADGET_TARGET_ATTR_WO(inta); +PCIE_GADGET_TARGET_ATTR_WO(send_msi); +PCIE_GADGET_TARGET_ATTR_RW(vendor_id); +PCIE_GADGET_TARGET_ATTR_RW(device_id); +PCIE_GADGET_TARGET_ATTR_RW(bar0_size); +PCIE_GADGET_TARGET_ATTR_RW(bar0_address); +PCIE_GADGET_TARGET_ATTR_RW(bar0_rw_offset); +PCIE_GADGET_TARGET_ATTR_RW(bar0_data); + +static struct configfs_attribute *pcie_gadget_target_attrs[] = { + &pcie_gadget_target_link.attr, + &pcie_gadget_target_int_type.attr, + &pcie_gadget_target_no_of_msi.attr, + &pcie_gadget_target_inta.attr, + &pcie_gadget_target_send_msi.attr, + &pcie_gadget_target_vendor_id.attr, + &pcie_gadget_target_device_id.attr, + &pcie_gadget_target_bar0_size.attr, + &pcie_gadget_target_bar0_address.attr, + &pcie_gadget_target_bar0_rw_offset.attr, + &pcie_gadget_target_bar0_data.attr, + NULL, +}; + +static struct pcie_gadget_target *to_target(struct config_item *item) +{ + return item ? + container_of(to_configfs_subsystem(to_config_group(item)), + struct pcie_gadget_target, subsys) : NULL; +} + +/* + * Item operations and type for pcie_gadget_target. + */ + +static ssize_t pcie_gadget_target_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *buf) +{ + ssize_t ret = -EINVAL; + struct pcie_gadget_target *target = to_target(item); + struct pcie_gadget_target_attr *t_attr = + container_of(attr, struct pcie_gadget_target_attr, attr); + + if (t_attr->show) + ret = t_attr->show(&target->config, buf); + return ret; +} + +static ssize_t pcie_gadget_target_attr_store(struct config_item *item, + struct configfs_attribute *attr, + const char *buf, + size_t count) +{ + ssize_t ret = -EINVAL; + struct pcie_gadget_target *target = to_target(item); + struct pcie_gadget_target_attr *t_attr = + container_of(attr, struct pcie_gadget_target_attr, attr); + + if (t_attr->store) + ret = t_attr->store(&target->config, buf, count); + return ret; +} + +static struct configfs_item_operations pcie_gadget_target_item_ops = { + .show_attribute = pcie_gadget_target_attr_show, + .store_attribute = pcie_gadget_target_attr_store, +}; + +static struct config_item_type pcie_gadget_target_type = { + .ct_attrs = pcie_gadget_target_attrs, + .ct_item_ops = &pcie_gadget_target_item_ops, + .ct_owner = THIS_MODULE, +}; + +static void spear13xx_pcie_device_init(struct spear_pcie_gadget_config *config) +{ + struct pcie_app_reg __iomem *app_reg = config->va_app_base; + + /*setup registers for outbound translation */ + + writel(config->base, &app_reg->in0_mem_addr_start); + writel(app_reg->in0_mem_addr_start + IN0_MEM_SIZE, + &app_reg->in0_mem_addr_limit); + writel(app_reg->in0_mem_addr_limit + 1, &app_reg->in1_mem_addr_start); + writel(app_reg->in1_mem_addr_start + IN1_MEM_SIZE, + &app_reg->in1_mem_addr_limit); + writel(app_reg->in1_mem_addr_limit + 1, &app_reg->in_io_addr_start); + writel(app_reg->in_io_addr_start + IN_IO_SIZE, + &app_reg->in_io_addr_limit); + writel(app_reg->in_io_addr_limit + 1, &app_reg->in_cfg0_addr_start); + writel(app_reg->in_cfg0_addr_start + IN_CFG0_SIZE, + &app_reg->in_cfg0_addr_limit); + writel(app_reg->in_cfg0_addr_limit + 1, &app_reg->in_cfg1_addr_start); + writel(app_reg->in_cfg1_addr_start + IN_CFG1_SIZE, + &app_reg->in_cfg1_addr_limit); + writel(app_reg->in_cfg1_addr_limit + 1, &app_reg->in_msg_addr_start); + writel(app_reg->in_msg_addr_start + IN_MSG_SIZE, + &app_reg->in_msg_addr_limit); + + writel(app_reg->in0_mem_addr_start, &app_reg->pom0_mem_addr_start); + writel(app_reg->in1_mem_addr_start, &app_reg->pom1_mem_addr_start); + writel(app_reg->in_io_addr_start, &app_reg->pom_io_addr_start); + + /*setup registers for inbound translation */ + + /* Keep AORAM mapped at BAR0 as default */ + config->bar0_size = INBOUND_ADDR_MASK + 1; + spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, INBOUND_ADDR_MASK); + spear_dbi_write_reg(config, PCI_BASE_ADDRESS_0, 4, 0xC); + config->va_bar0_address = ioremap(SPEAR13XX_SYSRAM1_BASE, + config->bar0_size); + + writel(SPEAR13XX_SYSRAM1_BASE, &app_reg->pim0_mem_addr_start); + writel(0, &app_reg->pim1_mem_addr_start); + writel(INBOUND_ADDR_MASK + 1, &app_reg->mem0_addr_offset_limit); + + writel(0x0, &app_reg->pim_io_addr_start); + writel(0x0, &app_reg->pim_io_addr_start); + writel(0x0, &app_reg->pim_rom_addr_start); + + writel(DEVICE_TYPE_EP | (1 << MISCTRL_EN_ID) + | ((u32)1 << REG_TRANSLATION_ENABLE), + &app_reg->app_ctrl_0); + /* disable all rx interrupts */ + writel(0, &app_reg->int_mask); + + /* Select INTA as default*/ + spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1); +} + +static int __devinit spear_pcie_gadget_probe(struct platform_device *pdev) +{ + struct resource *res0, *res1; + unsigned int status = 0; + int irq; + struct clk *clk; + static struct pcie_gadget_target *target; + struct spear_pcie_gadget_config *config; + struct config_item *cg_item; + struct configfs_subsystem *subsys; + + /* get resource for application registers*/ + + res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res0) { + dev_err(&pdev->dev, "no resource defined\n"); + return -EBUSY; + } + if (!request_mem_region(res0->start, resource_size(res0), + pdev->name)) { + dev_err(&pdev->dev, "pcie gadget region already claimed\n"); + return -EBUSY; + } + /* get resource for dbi registers*/ + + res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res1) { + dev_err(&pdev->dev, "no resource defined\n"); + goto err_rel_res0; + } + if (!request_mem_region(res1->start, resource_size(res1), + pdev->name)) { + dev_err(&pdev->dev, "pcie gadget region already claimed\n"); + goto err_rel_res0; + } + + target = kzalloc(sizeof(*target), GFP_KERNEL); + if (!target) { + dev_err(&pdev->dev, "out of memory\n"); + status = -ENOMEM; + goto err_rel_res; + } + + cg_item = &target->subsys.su_group.cg_item; + sprintf(cg_item->ci_namebuf, "pcie_gadget.%d", pdev->id); + cg_item->ci_type = &pcie_gadget_target_type; + config = &target->config; + config->va_app_base = (void __iomem *)ioremap(res0->start, + resource_size(res0)); + if (!config->va_app_base) { + dev_err(&pdev->dev, "ioremap fail\n"); + status = -ENOMEM; + goto err_kzalloc; + } + + config->base = (void __iomem *)res1->start; + + config->va_dbi_base = (void __iomem *)ioremap(res1->start, + resource_size(res1)); + if (!config->va_dbi_base) { + dev_err(&pdev->dev, "ioremap fail\n"); + status = -ENOMEM; + goto err_iounmap_app; + } + + dev_set_drvdata(&pdev->dev, target); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no update irq?\n"); + status = irq; + goto err_iounmap; + } + + status = request_irq(irq, spear_pcie_gadget_irq, 0, pdev->name, NULL); + if (status) { + dev_err(&pdev->dev, "pcie gadget interrupt IRQ%d already \ + claimed\n", irq); + goto err_iounmap; + } + + /* Register configfs hooks */ + subsys = &target->subsys; + config_group_init(&subsys->su_group); + mutex_init(&subsys->su_mutex); + status = configfs_register_subsystem(subsys); + if (status) + goto err_irq; + + /* + * init basic pcie application registers + * do not enable clock if it is PCIE0.Ideally , all controller should + * have been independent from others with respect to clock. But PCIE1 + * and 2 depends on PCIE0.So PCIE0 clk is provided during board init. + */ + if (pdev->id == 1) { + /* + * Ideally CFG Clock should have been also enabled here. But + * it is done currently during board init routne + */ + clk = clk_get_sys("pcie1", NULL); + if (IS_ERR(clk)) { + pr_err("%s:couldn't get clk for pcie1\n", __func__); + goto err_irq; + } + if (clk_enable(clk)) { + pr_err("%s:couldn't enable clk for pcie1\n", __func__); + goto err_irq; + } + } else if (pdev->id == 2) { + /* + * Ideally CFG Clock should have been also enabled here. But + * it is done currently during board init routne + */ + clk = clk_get_sys("pcie2", NULL); + if (IS_ERR(clk)) { + pr_err("%s:couldn't get clk for pcie2\n", __func__); + goto err_irq; + } + if (clk_enable(clk)) { + pr_err("%s:couldn't enable clk for pcie2\n", __func__); + goto err_irq; + } + } + spear13xx_pcie_device_init(config); + + return 0; +err_irq: + free_irq(irq, NULL); +err_iounmap: + iounmap(config->va_dbi_base); +err_iounmap_app: + iounmap(config->va_app_base); +err_kzalloc: + kfree(config); +err_rel_res: + release_mem_region(res1->start, resource_size(res1)); +err_rel_res0: + release_mem_region(res0->start, resource_size(res0)); + return status; +} + +static int __devexit spear_pcie_gadget_remove(struct platform_device *pdev) +{ + struct resource *res0, *res1; + static struct pcie_gadget_target *target; + struct spear_pcie_gadget_config *config; + int irq; + + res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0); + res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1); + irq = platform_get_irq(pdev, 0); + target = dev_get_drvdata(&pdev->dev); + config = &target->config; + + free_irq(irq, NULL); + iounmap(config->va_dbi_base); + iounmap(config->va_app_base); + release_mem_region(res1->start, resource_size(res1)); + release_mem_region(res0->start, resource_size(res0)); + configfs_unregister_subsystem(&target->subsys); + kfree(target); + + return 0; +} + +static void spear_pcie_gadget_shutdown(struct platform_device *pdev) +{ +} + +static struct platform_driver spear_pcie_gadget_driver = { + .probe = spear_pcie_gadget_probe, + .remove = spear_pcie_gadget_remove, + .shutdown = spear_pcie_gadget_shutdown, + .driver = { + .name = "pcie-gadget-spear", + .bus = &platform_bus_type + }, +}; + +static int __init spear_pcie_gadget_init(void) +{ + return platform_driver_register(&spear_pcie_gadget_driver); +} +module_init(spear_pcie_gadget_init); + +static void __exit spear_pcie_gadget_exit(void) +{ + platform_driver_unregister(&spear_pcie_gadget_driver); +} +module_exit(spear_pcie_gadget_exit); + +MODULE_ALIAS("pcie-gadget-spear"); +MODULE_AUTHOR("Pratyush Anand"); +MODULE_LICENSE("GPL"); |