diff options
| -rw-r--r-- | Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt | 46 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt | 25 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt | 34 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt | 52 | ||||
| -rw-r--r-- | drivers/firmware/xilinx/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/firmware/xilinx/zynqmp.c | 166 | ||||
| -rw-r--r-- | drivers/nvmem/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/nvmem/Makefile | 2 | ||||
| -rw-r--r-- | drivers/nvmem/zynqmp_nvmem.c | 86 | ||||
| -rw-r--r-- | drivers/reset/Makefile | 1 | ||||
| -rw-r--r-- | drivers/reset/reset-zynqmp.c | 114 | ||||
| -rw-r--r-- | drivers/soc/xilinx/Kconfig | 20 | ||||
| -rw-r--r-- | drivers/soc/xilinx/Makefile | 2 | ||||
| -rw-r--r-- | drivers/soc/xilinx/zynqmp_pm_domains.c | 321 | ||||
| -rw-r--r-- | drivers/soc/xilinx/zynqmp_power.c | 178 | ||||
| -rw-r--r-- | include/dt-bindings/power/xlnx-zynqmp-power.h | 39 | ||||
| -rw-r--r-- | include/dt-bindings/reset/xlnx-zynqmp-resets.h | 130 | ||||
| -rw-r--r-- | include/linux/firmware/xlnx-zynqmp.h | 184 |
18 files changed, 1411 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt new file mode 100644 index 0000000000000..4881561b3a02a --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt @@ -0,0 +1,46 @@ +-------------------------------------------------------------------------- += Zynq UltraScale+ MPSoC nvmem firmware driver binding = +-------------------------------------------------------------------------- +The nvmem_firmware node provides access to the hardware related data +like soc revision, IDCODE... etc, By using the firmware interface. + +Required properties: +- compatible: should be "xlnx,zynqmp-nvmem-fw" + += Data cells = +Are child nodes of silicon id, bindings of which as described in +bindings/nvmem/nvmem.txt + +------- + Example +------- +firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + + nvmem_firmware { + compatible = "xlnx,zynqmp-nvmem-fw"; + #address-cells = <1>; + #size-cells = <1>; + + /* Data cells */ + soc_revision: soc_revision { + reg = <0x0 0x4>; + }; + }; + }; +}; + += Data consumers = +Are device nodes which consume nvmem data cells. + +For example: + pcap { + ... + + nvmem-cells = <&soc_revision>; + nvmem-cell-names = "soc_revision"; + + ... + }; diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt new file mode 100644 index 0000000000000..d366f1eb623ad --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt @@ -0,0 +1,25 @@ +-------------------------------------------------------------------- +Device Tree Bindings for the Xilinx Zynq MPSoC Power Management +-------------------------------------------------------------------- +The zynqmp-power node describes the power management configurations. +It will control remote suspend/shutdown interfaces. + +Required properties: + - compatible: Must contain: "xlnx,zynqmp-power" + - interrupts: Interrupt specifier + +------- +Example +------- + +firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + + zynqmp_power: zynqmp-power { + compatible = "xlnx,zynqmp-power"; + interrupts = <0 35 4>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt b/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt new file mode 100644 index 0000000000000..8d1b8200ebd01 --- /dev/null +++ b/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt @@ -0,0 +1,34 @@ +----------------------------------------------------------- +Device Tree Bindings for the Xilinx Zynq MPSoC PM domains +----------------------------------------------------------- +The binding for zynqmp-power-controller follow the common +generic PM domain binding[1]. + +[1] Documentation/devicetree/bindings/power/power_domain.txt + +== Zynq MPSoC Generic PM Domain Node == + +Required property: + - Below property should be in zynqmp-firmware node. + - #power-domain-cells: Number of cells in a PM domain specifier. Must be 1. + +Power domain ID indexes are mentioned in +include/dt-bindings/power/xlnx-zynqmp-power.h. + +------- +Example +------- + +firmware { + zynqmp_firmware: zynqmp-firmware { + ... + #power-domain-cells = <1>; + ... + }; +}; + +sata { + ... + power-domains = <&zynqmp_firmware 28>; + ... +}; diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt new file mode 100644 index 0000000000000..27a45fe5ecf17 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt @@ -0,0 +1,52 @@ +-------------------------------------------------------------------------- + = Zynq UltraScale+ MPSoC reset driver binding = +-------------------------------------------------------------------------- +The Zynq UltraScale+ MPSoC has several different resets. + +See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information +about zynqmp resets. + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required Properties: +- compatible: "xlnx,zynqmp-reset" +- #reset-cells: Specifies the number of cells needed to encode reset + line, should be 1 + +------- +Example +------- + +firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + + zynqmp_reset: reset-controller { + compatible = "xlnx,zynqmp-reset"; + #reset-cells = <1>; + }; + }; +}; + +Specifying reset lines connected to IP modules +============================================== + +Device nodes that need access to reset lines should +specify them as a reset phandle in their corresponding node as +specified in reset.txt. + +For list of all valid reset indicies see +<dt-bindings/reset/xlnx-zynqmp-resets.h> + +Example: + +serdes: zynqmp_phy@fd400000 { + ... + + resets = <&zynqmp_reset ZYNQMP_RESET_SATA>; + reset-names = "sata_rst"; + + ... +}; diff --git a/drivers/firmware/xilinx/Kconfig b/drivers/firmware/xilinx/Kconfig index 8f44b9cd295a3..bd33bbf70daf0 100644 --- a/drivers/firmware/xilinx/Kconfig +++ b/drivers/firmware/xilinx/Kconfig @@ -6,6 +6,7 @@ menu "Zynq MPSoC Firmware Drivers" config ZYNQMP_FIRMWARE bool "Enable Xilinx Zynq MPSoC firmware interface" + select MFD_CORE help Firmware interface driver is used by different drivers to communicate with the firmware for diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c index 9a1c72a9280f1..98f936125643d 100644 --- a/drivers/firmware/xilinx/zynqmp.c +++ b/drivers/firmware/xilinx/zynqmp.c @@ -14,6 +14,7 @@ #include <linux/compiler.h> #include <linux/device.h> #include <linux/init.h> +#include <linux/mfd/core.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_platform.h> @@ -23,6 +24,12 @@ #include <linux/firmware/xlnx-zynqmp.h> #include "zynqmp-debug.h" +static const struct mfd_cell firmware_devs[] = { + { + .name = "zynqmp_power_controller", + }, +}; + /** * zynqmp_pm_ret_code() - Convert PMU-FW error codes to Linux error codes * @ret_status: PMUFW return code @@ -187,6 +194,29 @@ static int zynqmp_pm_get_api_version(u32 *version) } /** + * zynqmp_pm_get_chipid - Get silicon ID registers + * @idcode: IDCODE register + * @version: version register + * + * Return: Returns the status of the operation and the idcode and version + * registers in @idcode and @version. + */ +static int zynqmp_pm_get_chipid(u32 *idcode, u32 *version) +{ + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + if (!idcode || !version) + return -EINVAL; + + ret = zynqmp_pm_invoke_fn(PM_GET_CHIPID, 0, 0, 0, 0, ret_payload); + *idcode = ret_payload[1]; + *version = ret_payload[2]; + + return ret; +} + +/** * zynqmp_pm_get_trustzone_version() - Get secure trustzone firmware version * @version: Returned version value * @@ -469,8 +499,129 @@ static int zynqmp_pm_ioctl(u32 node_id, u32 ioctl_id, u32 arg1, u32 arg2, arg1, arg2, out); } +/** + * zynqmp_pm_reset_assert - Request setting of reset (1 - assert, 0 - release) + * @reset: Reset to be configured + * @assert_flag: Flag stating should reset be asserted (1) or + * released (0) + * + * Return: Returns status, either success or error+reason + */ +static int zynqmp_pm_reset_assert(const enum zynqmp_pm_reset reset, + const enum zynqmp_pm_reset_action assert_flag) +{ + return zynqmp_pm_invoke_fn(PM_RESET_ASSERT, reset, assert_flag, + 0, 0, NULL); +} + +/** + * zynqmp_pm_reset_get_status - Get status of the reset + * @reset: Reset whose status should be returned + * @status: Returned status + * + * Return: Returns status, either success or error+reason + */ +static int zynqmp_pm_reset_get_status(const enum zynqmp_pm_reset reset, + u32 *status) +{ + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + if (!status) + return -EINVAL; + + ret = zynqmp_pm_invoke_fn(PM_RESET_GET_STATUS, reset, 0, + 0, 0, ret_payload); + *status = ret_payload[1]; + + return ret; +} + +/** + * zynqmp_pm_init_finalize() - PM call to inform firmware that the caller + * master has initialized its own power management + * + * This API function is to be used for notify the power management controller + * about the completed power management initialization. + * + * Return: Returns status, either success or error+reason + */ +static int zynqmp_pm_init_finalize(void) +{ + return zynqmp_pm_invoke_fn(PM_PM_INIT_FINALIZE, 0, 0, 0, 0, NULL); +} + +/** + * zynqmp_pm_set_suspend_mode() - Set system suspend mode + * @mode: Mode to set for system suspend + * + * This API function is used to set mode of system suspend. + * + * Return: Returns status, either success or error+reason + */ +static int zynqmp_pm_set_suspend_mode(u32 mode) +{ + return zynqmp_pm_invoke_fn(PM_SET_SUSPEND_MODE, mode, 0, 0, 0, NULL); +} + +/** + * zynqmp_pm_request_node() - Request a node with specific capabilities + * @node: Node ID of the slave + * @capabilities: Requested capabilities of the slave + * @qos: Quality of service (not supported) + * @ack: Flag to specify whether acknowledge is requested + * + * This function is used by master to request particular node from firmware. + * Every master must request node before using it. + * + * Return: Returns status, either success or error+reason + */ +static int zynqmp_pm_request_node(const u32 node, const u32 capabilities, + const u32 qos, + const enum zynqmp_pm_request_ack ack) +{ + return zynqmp_pm_invoke_fn(PM_REQUEST_NODE, node, capabilities, + qos, ack, NULL); +} + +/** + * zynqmp_pm_release_node() - Release a node + * @node: Node ID of the slave + * + * This function is used by master to inform firmware that master + * has released node. Once released, master must not use that node + * without re-request. + * + * Return: Returns status, either success or error+reason + */ +static int zynqmp_pm_release_node(const u32 node) +{ + return zynqmp_pm_invoke_fn(PM_RELEASE_NODE, node, 0, 0, 0, NULL); +} + +/** + * zynqmp_pm_set_requirement() - PM call to set requirement for PM slaves + * @node: Node ID of the slave + * @capabilities: Requested capabilities of the slave + * @qos: Quality of service (not supported) + * @ack: Flag to specify whether acknowledge is requested + * + * This API function is to be used for slaves a PU already has requested + * to change its capabilities. + * + * Return: Returns status, either success or error+reason + */ +static int zynqmp_pm_set_requirement(const u32 node, const u32 capabilities, + const u32 qos, + const enum zynqmp_pm_request_ack ack) +{ + return zynqmp_pm_invoke_fn(PM_SET_REQUIREMENT, node, capabilities, + qos, ack, NULL); +} + static const struct zynqmp_eemi_ops eemi_ops = { .get_api_version = zynqmp_pm_get_api_version, + .get_chipid = zynqmp_pm_get_chipid, .query_data = zynqmp_pm_query_data, .clock_enable = zynqmp_pm_clock_enable, .clock_disable = zynqmp_pm_clock_disable, @@ -482,6 +633,13 @@ static const struct zynqmp_eemi_ops eemi_ops = { .clock_setparent = zynqmp_pm_clock_setparent, .clock_getparent = zynqmp_pm_clock_getparent, .ioctl = zynqmp_pm_ioctl, + .reset_assert = zynqmp_pm_reset_assert, + .reset_get_status = zynqmp_pm_reset_get_status, + .init_finalize = zynqmp_pm_init_finalize, + .set_suspend_mode = zynqmp_pm_set_suspend_mode, + .request_node = zynqmp_pm_request_node, + .release_node = zynqmp_pm_release_node, + .set_requirement = zynqmp_pm_set_requirement, }; /** @@ -538,11 +696,19 @@ static int zynqmp_firmware_probe(struct platform_device *pdev) zynqmp_pm_api_debugfs_init(); + ret = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE, firmware_devs, + ARRAY_SIZE(firmware_devs), NULL, 0, NULL); + if (ret) { + dev_err(&pdev->dev, "failed to add MFD devices %d\n", ret); + return ret; + } + return of_platform_populate(dev->of_node, NULL, NULL, dev); } static int zynqmp_firmware_remove(struct platform_device *pdev) { + mfd_remove_devices(&pdev->dev); zynqmp_pm_api_debugfs_exit(); return 0; diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index 0a7a470ee8594..4ad846ceac7ca 100644 --- a/drivers/nvmem/Kconfig +++ b/drivers/nvmem/Kconfig @@ -192,4 +192,14 @@ config SC27XX_EFUSE This driver can also be built as a module. If so, the module will be called nvmem-sc27xx-efuse. +config NVMEM_ZYNQMP + bool "Xilinx ZYNQMP SoC nvmem firmware support" + depends on ARCH_ZYNQMP + help + This is a driver to access hardware related data like + soc revision, IDCODE... etc by using the firmware + interface. + + If sure, say yes. If unsure, say no. + endif diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile index 4e8c61628f1a2..2ece8ffffdda7 100644 --- a/drivers/nvmem/Makefile +++ b/drivers/nvmem/Makefile @@ -41,3 +41,5 @@ obj-$(CONFIG_RAVE_SP_EEPROM) += nvmem-rave-sp-eeprom.o nvmem-rave-sp-eeprom-y := rave-sp-eeprom.o obj-$(CONFIG_SC27XX_EFUSE) += nvmem-sc27xx-efuse.o nvmem-sc27xx-efuse-y := sc27xx-efuse.o +obj-$(CONFIG_NVMEM_ZYNQMP) += nvmem_zynqmp_nvmem.o +nvmem_zynqmp_nvmem-y := zynqmp_nvmem.o diff --git a/drivers/nvmem/zynqmp_nvmem.c b/drivers/nvmem/zynqmp_nvmem.c new file mode 100644 index 0000000000000..490c8fcaec801 --- /dev/null +++ b/drivers/nvmem/zynqmp_nvmem.c @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Xilinx, Inc. + */ + +#include <linux/module.h> +#include <linux/nvmem-provider.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/firmware/xlnx-zynqmp.h> + +#define SILICON_REVISION_MASK 0xF + +struct zynqmp_nvmem_data { + struct device *dev; + struct nvmem_device *nvmem; +}; + +static int zynqmp_nvmem_read(void *context, unsigned int offset, + void *val, size_t bytes) +{ + int ret; + int idcode, version; + struct zynqmp_nvmem_data *priv = context; + + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->get_chipid) + return -ENXIO; + + ret = eemi_ops->get_chipid(&idcode, &version); + if (ret < 0) + return ret; + + dev_dbg(priv->dev, "Read chipid val %x %x\n", idcode, version); + *(int *)val = version & SILICON_REVISION_MASK; + + return 0; +} + +static struct nvmem_config econfig = { + .name = "zynqmp-nvmem", + .owner = THIS_MODULE, + .word_size = 1, + .size = 1, + .read_only = true, +}; + +static const struct of_device_id zynqmp_nvmem_match[] = { + { .compatible = "xlnx,zynqmp-nvmem-fw", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, zynqmp_nvmem_match); + +static int zynqmp_nvmem_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct zynqmp_nvmem_data *priv; + + priv = devm_kzalloc(dev, sizeof(struct zynqmp_nvmem_data), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + econfig.dev = dev; + econfig.reg_read = zynqmp_nvmem_read; + econfig.priv = priv; + + priv->nvmem = devm_nvmem_register(dev, &econfig); + + return PTR_ERR_OR_ZERO(priv->nvmem); +} + +static struct platform_driver zynqmp_nvmem_driver = { + .probe = zynqmp_nvmem_probe, + .driver = { + .name = "zynqmp-nvmem", + .of_match_table = zynqmp_nvmem_match, + }, +}; + +module_platform_driver(zynqmp_nvmem_driver); + +MODULE_AUTHOR("Michal Simek <michal.simek@xilinx.com>, Nava kishore Manne <navam@xilinx.com>"); +MODULE_DESCRIPTION("ZynqMP NVMEM driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index dc7874df78d9b..573b8386d9014 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -26,4 +26,5 @@ obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o obj-$(CONFIG_RESET_UNIPHIER_GLUE) += reset-uniphier-glue.o obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o +obj-$(CONFIG_ARCH_ZYNQMP) += reset-zynqmp.o diff --git a/drivers/reset/reset-zynqmp.c b/drivers/reset/reset-zynqmp.c new file mode 100644 index 0000000000000..2ef1f13aa47bc --- /dev/null +++ b/drivers/reset/reset-zynqmp.c @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Xilinx, Inc. + * + */ + +#include <linux/err.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/reset-controller.h> +#include <linux/firmware/xlnx-zynqmp.h> + +#define ZYNQMP_NR_RESETS (ZYNQMP_PM_RESET_END - ZYNQMP_PM_RESET_START) +#define ZYNQMP_RESET_ID ZYNQMP_PM_RESET_START + +struct zynqmp_reset_data { + struct reset_controller_dev rcdev; + const struct zynqmp_eemi_ops *eemi_ops; +}; + +static inline struct zynqmp_reset_data * +to_zynqmp_reset_data(struct reset_controller_dev *rcdev) +{ + return container_of(rcdev, struct zynqmp_reset_data, rcdev); +} + +static int zynqmp_reset_assert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev); + + return priv->eemi_ops->reset_assert(ZYNQMP_RESET_ID + id, + PM_RESET_ACTION_ASSERT); +} + +static int zynqmp_reset_deassert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev); + + return priv->eemi_ops->reset_assert(ZYNQMP_RESET_ID + id, + PM_RESET_ACTION_RELEASE); +} + +static int zynqmp_reset_status(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev); + int val, err; + + err = priv->eemi_ops->reset_get_status(ZYNQMP_RESET_ID + id, &val); + if (err) + return err; + + return val; +} + +static int zynqmp_reset_reset(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev); + + return priv->eemi_ops->reset_assert(ZYNQMP_RESET_ID + id, + PM_RESET_ACTION_PULSE); +} + +static struct reset_control_ops zynqmp_reset_ops = { + .reset = zynqmp_reset_reset, + .assert = zynqmp_reset_assert, + .deassert = zynqmp_reset_deassert, + .status = zynqmp_reset_status, +}; + +static int zynqmp_reset_probe(struct platform_device *pdev) +{ + struct zynqmp_reset_data *priv; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + platform_set_drvdata(pdev, priv); + + priv->eemi_ops = zynqmp_pm_get_eemi_ops(); + if (!priv->eemi_ops) + return -ENXIO; + + priv->rcdev.ops = &zynqmp_reset_ops; + priv->rcdev.owner = THIS_MODULE; + priv->rcdev.of_node = pdev->dev.of_node; + priv->rcdev.nr_resets = ZYNQMP_NR_RESETS; + + return devm_reset_controller_register(&pdev->dev, &priv->rcdev); +} + +static const struct of_device_id zynqmp_reset_dt_ids[] = { + { .compatible = "xlnx,zynqmp-reset", }, + { /* sentinel */ }, +}; + +static struct platform_driver zynqmp_reset_driver = { + .probe = zynqmp_reset_probe, + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = zynqmp_reset_dt_ids, + }, +}; + +static int __init zynqmp_reset_init(void) +{ + return platform_driver_register(&zynqmp_reset_driver); +} + +arch_initcall(zynqmp_reset_init); diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig index 687c8f3cd9552..01e76b58dd78a 100644 --- a/drivers/soc/xilinx/Kconfig +++ b/drivers/soc/xilinx/Kconfig @@ -17,4 +17,24 @@ config XILINX_VCU To compile this driver as a module, choose M here: the module will be called xlnx_vcu. +config ZYNQMP_POWER + bool "Enable Xilinx Zynq MPSoC Power Management driver" + depends on PM && ARCH_ZYNQMP + default y + help + Say yes to enable power management support for ZyqnMP SoC. + This driver uses firmware driver as an interface for power + management request to firmware. It registers isr to handle + power management callbacks from firmware. + If in doubt, say N. + +config ZYNQMP_PM_DOMAINS + bool "Enable Zynq MPSoC generic PM domains" + default y + depends on PM && ARCH_ZYNQMP && ZYNQMP_FIRMWARE + select PM_GENERIC_DOMAINS + help + Say yes to enable device power management through PM domains + If in doubt, say N. + endmenu diff --git a/drivers/soc/xilinx/Makefile b/drivers/soc/xilinx/Makefile index dee8fd51e3032..f66bfea5de175 100644 --- a/drivers/soc/xilinx/Makefile +++ b/drivers/soc/xilinx/Makefile @@ -1,2 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_XILINX_VCU) += xlnx_vcu.o +obj-$(CONFIG_ZYNQMP_POWER) += zynqmp_power.o +obj-$(CONFIG_ZYNQMP_PM_DOMAINS) += zynqmp_pm_domains.o diff --git a/drivers/soc/xilinx/zynqmp_pm_domains.c b/drivers/soc/xilinx/zynqmp_pm_domains.c new file mode 100644 index 0000000000000..354d256e6e006 --- /dev/null +++ b/drivers/soc/xilinx/zynqmp_pm_domains.c @@ -0,0 +1,321 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ZynqMP Generic PM domain support + * + * Copyright (C) 2015-2018 Xilinx, Inc. + * + * Davorin Mista <davorin.mista@aggios.com> + * Jolly Shah <jollys@xilinx.com> + * Rajan Vaja <rajan.vaja@xilinx.com> + */ + +#include <linux/err.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/pm_domain.h> +#include <linux/slab.h> + +#include <linux/firmware/xlnx-zynqmp.h> + +#define ZYNQMP_NUM_DOMAINS (100) +/* Flag stating if PM nodes mapped to the PM domain has been requested */ +#define ZYNQMP_PM_DOMAIN_REQUESTED BIT(0) + +/** + * struct zynqmp_pm_domain - Wrapper around struct generic_pm_domain + * @gpd: Generic power domain + * @node_id: PM node ID corresponding to device inside PM domain + * @flags: ZynqMP PM domain flags + */ +struct zynqmp_pm_domain { + struct generic_pm_domain gpd; + u32 node_id; + u8 flags; +}; + +/** + * zynqmp_gpd_is_active_wakeup_path() - Check if device is in wakeup source + * path + * @dev: Device to check for wakeup source path + * @not_used: Data member (not required) + * + * This function is checks device's child hierarchy and checks if any device is + * set as wakeup source. + * + * Return: 1 if device is in wakeup source path else 0 + */ +static int zynqmp_gpd_is_active_wakeup_path(struct device *dev, void *not_used) +{ + int may_wakeup; + + may_wakeup = device_may_wakeup(dev); + if (may_wakeup) + return may_wakeup; + + return device_for_each_child(dev, NULL, + zynqmp_gpd_is_active_wakeup_path); +} + +/** + * zynqmp_gpd_power_on() - Power on PM domain + * @domain: Generic PM domain + * + * This function is called before devices inside a PM domain are resumed, to + * power on PM domain. + * + * Return: 0 on success, error code otherwise + */ +static int zynqmp_gpd_power_on(struct generic_pm_domain *domain) +{ + int ret; + struct zynqmp_pm_domain *pd; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->set_requirement) + return -ENXIO; + + pd = container_of(domain, struct zynqmp_pm_domain, gpd); + ret = eemi_ops->set_requirement(pd->node_id, + ZYNQMP_PM_CAPABILITY_ACCESS, + ZYNQMP_PM_MAX_QOS, + ZYNQMP_PM_REQUEST_ACK_BLOCKING); + if (ret) { + pr_err("%s() %s set requirement for node %d failed: %d\n", + __func__, domain->name, pd->node_id, ret); + return ret; + } + + pr_debug("%s() Powered on %s domain\n", __func__, domain->name); + return 0; +} + +/** + * zynqmp_gpd_power_off() - Power off PM domain + * @domain: Generic PM domain + * + * This function is called after devices inside a PM domain are suspended, to + * power off PM domain. + * + * Return: 0 on success, error code otherwise + */ +static int zynqmp_gpd_power_off(struct generic_pm_domain *domain) +{ + int ret; + struct pm_domain_data *pdd, *tmp; + struct zynqmp_pm_domain *pd; + u32 capabilities = 0; + bool may_wakeup; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->set_requirement) + return -ENXIO; + + pd = container_of(domain, struct zynqmp_pm_domain, gpd); + + /* If domain is already released there is nothing to be done */ + if (!(pd->flags & ZYNQMP_PM_DOMAIN_REQUESTED)) { + pr_debug("%s() %s domain is already released\n", + __func__, domain->name); + return 0; + } + + list_for_each_entry_safe(pdd, tmp, &domain->dev_list, list_node) { + /* If device is in wakeup path, set capability to WAKEUP */ + may_wakeup = zynqmp_gpd_is_active_wakeup_path(pdd->dev, NULL); + if (may_wakeup) { + dev_dbg(pdd->dev, "device is in wakeup path in %s\n", + domain->name); + capabilities = ZYNQMP_PM_CAPABILITY_WAKEUP; + break; + } + } + + ret = eemi_ops->set_requirement(pd->node_id, capabilities, 0, + ZYNQMP_PM_REQUEST_ACK_NO); + /** + * If powering down of any node inside this domain fails, + * report and return the error + */ + if (ret) { + pr_err("%s() %s set requirement for node %d failed: %d\n", + __func__, domain->name, pd->node_id, ret); + return ret; + } + + pr_debug("%s() Powered off %s domain\n", __func__, domain->name); + return 0; +} + +/** + * zynqmp_gpd_attach_dev() - Attach device to the PM domain + * @domain: Generic PM domain + * @dev: Device to attach + * + * Return: 0 on success, error code otherwise + */ +static int zynqmp_gpd_attach_dev(struct generic_pm_domain *domain, + struct device *dev) +{ + int ret; + struct zynqmp_pm_domain *pd; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->request_node) + return -ENXIO; + + pd = container_of(domain, struct zynqmp_pm_domain, gpd); + + /* If this is not the first device to attach there is nothing to do */ + if (domain->device_count) + return 0; + + ret = eemi_ops->request_node(pd->node_id, 0, 0, + ZYNQMP_PM_REQUEST_ACK_BLOCKING); + /* If requesting a node fails print and return the error */ + if (ret) { + pr_err("%s() %s request failed for node %d: %d\n", + __func__, domain->name, pd->node_id, ret); + return ret; + } + + pd->flags |= ZYNQMP_PM_DOMAIN_REQUESTED; + + pr_debug("%s() %s attached to %s domain\n", __func__, + dev_name(dev), domain->name); + return 0; +} + +/** + * zynqmp_gpd_detach_dev() - Detach device from the PM domain + * @domain: Generic PM domain + * @dev: Device to detach + */ +static void zynqmp_gpd_detach_dev(struct generic_pm_domain *domain, + struct device *dev) +{ + int ret; + struct zynqmp_pm_domain *pd; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->release_node) + return; + + pd = container_of(domain, struct zynqmp_pm_domain, gpd); + + /* If this is not the last device to detach there is nothing to do */ + if (domain->device_count) + return; + + ret = eemi_ops->release_node(pd->node_id); + /* If releasing a node fails print the error and return */ + if (ret) { + pr_err("%s() %s release failed for node %d: %d\n", + __func__, domain->name, pd->node_id, ret); + return; + } + + pd->flags &= ~ZYNQMP_PM_DOMAIN_REQUESTED; + + pr_debug("%s() %s detached from %s domain\n", __func__, + dev_name(dev), domain->name); +} + +static struct generic_pm_domain *zynqmp_gpd_xlate + (struct of_phandle_args *genpdspec, void *data) +{ + struct genpd_onecell_data *genpd_data = data; + unsigned int i, idx = genpdspec->args[0]; + struct zynqmp_pm_domain *pd; + + pd = container_of(genpd_data->domains[0], struct zynqmp_pm_domain, gpd); + + if (genpdspec->args_count != 1) + return ERR_PTR(-EINVAL); + + /* Check for existing pm domains */ + for (i = 0; i < ZYNQMP_NUM_DOMAINS; i++) { + if (pd[i].node_id == idx) + goto done; + } + + /** + * Add index in empty node_id of power domain list as no existing + * power domain found for current index. + */ + for (i = 0; i < ZYNQMP_NUM_DOMAINS; i++) { + if (pd[i].node_id == 0) { + pd[i].node_id = idx; + break; + } + } + +done: + if (!genpd_data->domains[i] || i == ZYNQMP_NUM_DOMAINS) + return ERR_PTR(-ENOENT); + + return genpd_data->domains[i]; +} + +static int zynqmp_gpd_probe(struct platform_device *pdev) +{ + int i; + struct genpd_onecell_data *zynqmp_pd_data; + struct generic_pm_domain **domains; + struct zynqmp_pm_domain *pd; + struct device *dev = &pdev->dev; + + pd = devm_kcalloc(dev, ZYNQMP_NUM_DOMAINS, sizeof(*pd), GFP_KERNEL); + if (!pd) + return -ENOMEM; + + zynqmp_pd_data = devm_kzalloc(dev, sizeof(*zynqmp_pd_data), GFP_KERNEL); + if (!zynqmp_pd_data) + return -ENOMEM; + + zynqmp_pd_data->xlate = zynqmp_gpd_xlate; + + domains = devm_kcalloc(dev, ZYNQMP_NUM_DOMAINS, sizeof(*domains), + GFP_KERNEL); + if (!domains) + return -ENOMEM; + + for (i = 0; i < ZYNQMP_NUM_DOMAINS; i++, pd++) { + pd->node_id = 0; + pd->gpd.name = kasprintf(GFP_KERNEL, "domain%d", i); + pd->gpd.power_off = zynqmp_gpd_power_off; + pd->gpd.power_on = zynqmp_gpd_power_on; + pd->gpd.attach_dev = zynqmp_gpd_attach_dev; + pd->gpd.detach_dev = zynqmp_gpd_detach_dev; + + domains[i] = &pd->gpd; + + /* Mark all PM domains as initially powered off */ + pm_genpd_init(&pd->gpd, NULL, true); + } + + zynqmp_pd_data->domains = domains; + zynqmp_pd_data->num_domains = ZYNQMP_NUM_DOMAINS; + of_genpd_add_provider_onecell(dev->parent->of_node, zynqmp_pd_data); + + return 0; +} + +static int zynqmp_gpd_remove(struct platform_device *pdev) +{ + of_genpd_del_provider(pdev->dev.parent->of_node); + + return 0; +} + +static struct platform_driver zynqmp_power_domain_driver = { + .driver = { + .name = "zynqmp_power_controller", + }, + .probe = zynqmp_gpd_probe, + .remove = zynqmp_gpd_remove, +}; +module_platform_driver(zynqmp_power_domain_driver); + +MODULE_ALIAS("platform:zynqmp_power_controller"); diff --git a/drivers/soc/xilinx/zynqmp_power.c b/drivers/soc/xilinx/zynqmp_power.c new file mode 100644 index 0000000000000..771cb59b9d22e --- /dev/null +++ b/drivers/soc/xilinx/zynqmp_power.c @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Xilinx Zynq MPSoC Power Management + * + * Copyright (C) 2014-2018 Xilinx, Inc. + * + * Davorin Mista <davorin.mista@aggios.com> + * Jolly Shah <jollys@xilinx.com> + * Rajan Vaja <rajan.vaja@xilinx.com> + */ + +#include <linux/mailbox_client.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/reboot.h> +#include <linux/suspend.h> + +#include <linux/firmware/xlnx-zynqmp.h> + +enum pm_suspend_mode { + PM_SUSPEND_MODE_FIRST = 0, + PM_SUSPEND_MODE_STD = PM_SUSPEND_MODE_FIRST, + PM_SUSPEND_MODE_POWER_OFF, +}; + +#define PM_SUSPEND_MODE_FIRST PM_SUSPEND_MODE_STD + +static const char *const suspend_modes[] = { + [PM_SUSPEND_MODE_STD] = "standard", + [PM_SUSPEND_MODE_POWER_OFF] = "power-off", +}; + +static enum pm_suspend_mode suspend_mode = PM_SUSPEND_MODE_STD; + +enum pm_api_cb_id { + PM_INIT_SUSPEND_CB = 30, + PM_ACKNOWLEDGE_CB, + PM_NOTIFY_CB, +}; + +static void zynqmp_pm_get_callback_data(u32 *buf) +{ + zynqmp_pm_invoke_fn(GET_CALLBACK_DATA, 0, 0, 0, 0, buf); +} + +static irqreturn_t zynqmp_pm_isr(int irq, void *data) +{ + u32 payload[CB_PAYLOAD_SIZE]; + + zynqmp_pm_get_callback_data(payload); + + /* First element is callback API ID, others are callback arguments */ + if (payload[0] == PM_INIT_SUSPEND_CB) { + switch (payload[1]) { + case SUSPEND_SYSTEM_SHUTDOWN: + orderly_poweroff(true); + break; + case SUSPEND_POWER_REQUEST: + pm_suspend(PM_SUSPEND_MEM); + break; + default: + pr_err("%s Unsupported InitSuspendCb reason " + "code %d\n", __func__, payload[1]); + } + } + + return IRQ_HANDLED; +} + +static ssize_t suspend_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + char *s = buf; + int md; + + for (md = PM_SUSPEND_MODE_FIRST; md < ARRAY_SIZE(suspend_modes); md++) + if (suspend_modes[md]) { + if (md == suspend_mode) + s += sprintf(s, "[%s] ", suspend_modes[md]); + else + s += sprintf(s, "%s ", suspend_modes[md]); + } + + /* Convert last space to newline */ + if (s != buf) + *(s - 1) = '\n'; + return (s - buf); +} + +static ssize_t suspend_mode_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int md, ret = -EINVAL; + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->set_suspend_mode) + return ret; + + for (md = PM_SUSPEND_MODE_FIRST; md < ARRAY_SIZE(suspend_modes); md++) + if (suspend_modes[md] && + sysfs_streq(suspend_modes[md], buf)) { + ret = 0; + break; + } + + if (!ret && md != suspend_mode) { + ret = eemi_ops->set_suspend_mode(md); + if (likely(!ret)) + suspend_mode = md; + } + + return ret ? ret : count; +} + +static DEVICE_ATTR_RW(suspend_mode); + +static int zynqmp_pm_probe(struct platform_device *pdev) +{ + int ret, irq; + u32 pm_api_version; + + const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops(); + + if (!eemi_ops || !eemi_ops->get_api_version || !eemi_ops->init_finalize) + return -ENXIO; + + eemi_ops->init_finalize(); + eemi_ops->get_api_version(&pm_api_version); + + /* Check PM API version number */ + if (pm_api_version < ZYNQMP_PM_VERSION) + return -ENODEV; + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) + return -ENXIO; + + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, zynqmp_pm_isr, + IRQF_NO_SUSPEND | IRQF_ONESHOT, + dev_name(&pdev->dev), &pdev->dev); + if (ret) { + dev_err(&pdev->dev, "devm_request_threaded_irq '%d' failed " + "with %d\n", irq, ret); + return ret; + } + + ret = sysfs_create_file(&pdev->dev.kobj, &dev_attr_suspend_mode.attr); + if (ret) { + dev_err(&pdev->dev, "unable to create sysfs interface\n"); + return ret; + } + + return 0; +} + +static int zynqmp_pm_remove(struct platform_device *pdev) +{ + sysfs_remove_file(&pdev->dev.kobj, &dev_attr_suspend_mode.attr); + + return 0; +} + +static const struct of_device_id pm_of_match[] = { + { .compatible = "xlnx,zynqmp-power", }, + { /* end of table */ }, +}; +MODULE_DEVICE_TABLE(of, pm_of_match); + +static struct platform_driver zynqmp_pm_platform_driver = { + .probe = zynqmp_pm_probe, + .remove = zynqmp_pm_remove, + .driver = { + .name = "zynqmp_power", + .of_match_table = pm_of_match, + }, +}; +module_platform_driver(zynqmp_pm_platform_driver); diff --git a/include/dt-bindings/power/xlnx-zynqmp-power.h b/include/dt-bindings/power/xlnx-zynqmp-power.h new file mode 100644 index 0000000000000..0d9a412fd5e04 --- /dev/null +++ b/include/dt-bindings/power/xlnx-zynqmp-power.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Xilinx, Inc. + */ + +#ifndef _DT_BINDINGS_ZYNQMP_POWER_H +#define _DT_BINDINGS_ZYNQMP_POWER_H + +#define PD_USB_0 22 +#define PD_USB_1 23 +#define PD_TTC_0 24 +#define PD_TTC_1 25 +#define PD_TTC_2 26 +#define PD_TTC_3 27 +#define PD_SATA 28 +#define PD_ETH_0 29 +#define PD_ETH_1 30 +#define PD_ETH_2 31 +#define PD_ETH_3 32 +#define PD_UART_0 33 +#define PD_UART_1 34 +#define PD_SPI_0 35 +#define PD_SPI_1 36 +#define PD_I2C_0 37 +#define PD_I2C_1 38 +#define PD_SD_0 39 +#define PD_SD_1 40 +#define PD_DP 41 +#define PD_GDMA 42 +#define PD_ADMA 43 +#define PD_NAND 44 +#define PD_QSPI 45 +#define PD_GPIO 46 +#define PD_CAN_0 47 +#define PD_CAN_1 48 +#define PD_GPU 58 +#define PD_PCIE 59 + +#endif diff --git a/include/dt-bindings/reset/xlnx-zynqmp-resets.h b/include/dt-bindings/reset/xlnx-zynqmp-resets.h new file mode 100644 index 0000000000000..d44525b9f8dbc --- /dev/null +++ b/include/dt-bindings/reset/xlnx-zynqmp-resets.h @@ -0,0 +1,130 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Xilinx, Inc. + */ + +#ifndef _DT_BINDINGS_ZYNQMP_RESETS_H +#define _DT_BINDINGS_ZYNQMP_RESETS_H + +#define ZYNQMP_RESET_PCIE_CFG 0 +#define ZYNQMP_RESET_PCIE_BRIDGE 1 +#define ZYNQMP_RESET_PCIE_CTRL 2 +#define ZYNQMP_RESET_DP 3 +#define ZYNQMP_RESET_SWDT_CRF 4 +#define ZYNQMP_RESET_AFI_FM5 5 +#define ZYNQMP_RESET_AFI_FM4 6 +#define ZYNQMP_RESET_AFI_FM3 7 +#define ZYNQMP_RESET_AFI_FM2 8 +#define ZYNQMP_RESET_AFI_FM1 9 +#define ZYNQMP_RESET_AFI_FM0 10 +#define ZYNQMP_RESET_GDMA 11 +#define ZYNQMP_RESET_GPU_PP1 12 +#define ZYNQMP_RESET_GPU_PP0 13 +#define ZYNQMP_RESET_GPU 14 +#define ZYNQMP_RESET_GT 15 +#define ZYNQMP_RESET_SATA 16 +#define ZYNQMP_RESET_ACPU3_PWRON 17 +#define ZYNQMP_RESET_ACPU2_PWRON 18 +#define ZYNQMP_RESET_ACPU1_PWRON 19 +#define ZYNQMP_RESET_ACPU0_PWRON 20 +#define ZYNQMP_RESET_APU_L2 21 +#define ZYNQMP_RESET_ACPU3 22 +#define ZYNQMP_RESET_ACPU2 23 +#define ZYNQMP_RESET_ACPU1 24 +#define ZYNQMP_RESET_ACPU0 25 +#define ZYNQMP_RESET_DDR 26 +#define ZYNQMP_RESET_APM_FPD 27 +#define ZYNQMP_RESET_SOFT 28 +#define ZYNQMP_RESET_GEM0 29 +#define ZYNQMP_RESET_GEM1 30 +#define ZYNQMP_RESET_GEM2 31 +#define ZYNQMP_RESET_GEM3 32 +#define ZYNQMP_RESET_QSPI 33 +#define ZYNQMP_RESET_UART0 34 +#define ZYNQMP_RESET_UART1 35 +#define ZYNQMP_RESET_SPI0 36 +#define ZYNQMP_RESET_SPI1 37 +#define ZYNQMP_RESET_SDIO0 38 +#define ZYNQMP_RESET_SDIO1 39 +#define ZYNQMP_RESET_CAN0 40 +#define ZYNQMP_RESET_CAN1 41 +#define ZYNQMP_RESET_I2C0 42 +#define ZYNQMP_RESET_I2C1 43 +#define ZYNQMP_RESET_TTC0 44 +#define ZYNQMP_RESET_TTC1 45 +#define ZYNQMP_RESET_TTC2 46 +#define ZYNQMP_RESET_TTC3 47 +#define ZYNQMP_RESET_SWDT_CRL 48 +#define ZYNQMP_RESET_NAND 49 +#define ZYNQMP_RESET_ADMA 50 +#define ZYNQMP_RESET_GPIO 51 +#define ZYNQMP_RESET_IOU_CC 52 +#define ZYNQMP_RESET_TIMESTAMP 53 +#define ZYNQMP_RESET_RPU_R50 54 +#define ZYNQMP_RESET_RPU_R51 55 +#define ZYNQMP_RESET_RPU_AMBA 56 +#define ZYNQMP_RESET_OCM 57 +#define ZYNQMP_RESET_RPU_PGE 58 +#define ZYNQMP_RESET_USB0_CORERESET 59 +#define ZYNQMP_RESET_USB1_CORERESET 60 +#define ZYNQMP_RESET_USB0_HIBERRESET 61 +#define ZYNQMP_RESET_USB1_HIBERRESET 62 +#define ZYNQMP_RESET_USB0_APB 63 +#define ZYNQMP_RESET_USB1_APB 64 +#define ZYNQMP_RESET_IPI 65 +#define ZYNQMP_RESET_APM_LPD 66 +#define ZYNQMP_RESET_RTC 67 +#define ZYNQMP_RESET_SYSMON 68 +#define ZYNQMP_RESET_AFI_FM6 69 +#define ZYNQMP_RESET_LPD_SWDT 70 +#define ZYNQMP_RESET_FPD 71 +#define ZYNQMP_RESET_RPU_DBG1 72 +#define ZYNQMP_RESET_RPU_DBG0 73 +#define ZYNQMP_RESET_DBG_LPD 74 +#define ZYNQMP_RESET_DBG_FPD 75 +#define ZYNQMP_RESET_APLL 76 +#define ZYNQMP_RESET_DPLL 77 +#define ZYNQMP_RESET_VPLL 78 +#define ZYNQMP_RESET_IOPLL 79 +#define ZYNQMP_RESET_RPLL 80 +#define ZYNQMP_RESET_GPO3_PL_0 81 +#define ZYNQMP_RESET_GPO3_PL_1 82 +#define ZYNQMP_RESET_GPO3_PL_2 83 +#define ZYNQMP_RESET_GPO3_PL_3 84 +#define ZYNQMP_RESET_GPO3_PL_4 85 +#define ZYNQMP_RESET_GPO3_PL_5 86 +#define ZYNQMP_RESET_GPO3_PL_6 87 +#define ZYNQMP_RESET_GPO3_PL_7 88 +#define ZYNQMP_RESET_GPO3_PL_8 89 +#define ZYNQMP_RESET_GPO3_PL_9 90 +#define ZYNQMP_RESET_GPO3_PL_10 91 +#define ZYNQMP_RESET_GPO3_PL_11 92 +#define ZYNQMP_RESET_GPO3_PL_12 93 +#define ZYNQMP_RESET_GPO3_PL_13 94 +#define ZYNQMP_RESET_GPO3_PL_14 95 +#define ZYNQMP_RESET_GPO3_PL_15 96 +#define ZYNQMP_RESET_GPO3_PL_16 97 +#define ZYNQMP_RESET_GPO3_PL_17 98 +#define ZYNQMP_RESET_GPO3_PL_18 99 +#define ZYNQMP_RESET_GPO3_PL_19 100 +#define ZYNQMP_RESET_GPO3_PL_20 101 +#define ZYNQMP_RESET_GPO3_PL_21 102 +#define ZYNQMP_RESET_GPO3_PL_22 103 +#define ZYNQMP_RESET_GPO3_PL_23 104 +#define ZYNQMP_RESET_GPO3_PL_24 105 +#define ZYNQMP_RESET_GPO3_PL_25 106 +#define ZYNQMP_RESET_GPO3_PL_26 107 +#define ZYNQMP_RESET_GPO3_PL_27 108 +#define ZYNQMP_RESET_GPO3_PL_28 109 +#define ZYNQMP_RESET_GPO3_PL_29 110 +#define ZYNQMP_RESET_GPO3_PL_30 111 +#define ZYNQMP_RESET_GPO3_PL_31 112 +#define ZYNQMP_RESET_RPU_LS 113 +#define ZYNQMP_RESET_PS_ONLY 114 +#define ZYNQMP_RESET_PL 115 +#define ZYNQMP_RESET_PS_PL0 116 +#define ZYNQMP_RESET_PS_PL1 117 +#define ZYNQMP_RESET_PS_PL2 118 +#define ZYNQMP_RESET_PS_PL3 119 + +#endif diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h index 3c3c28eff56a3..642dab10f65d7 100644 --- a/include/linux/firmware/xlnx-zynqmp.h +++ b/include/linux/firmware/xlnx-zynqmp.h @@ -28,12 +28,35 @@ /* SMC SIP service Call Function Identifier Prefix */ #define PM_SIP_SVC 0xC2000000 #define PM_GET_TRUSTZONE_VERSION 0xa03 +#define PM_SET_SUSPEND_MODE 0xa02 +#define GET_CALLBACK_DATA 0xa01 /* Number of 32bits values in payload */ #define PAYLOAD_ARG_CNT 4U +/* Number of arguments for a callback */ +#define CB_ARG_CNT 4 + +/* Payload size (consists of callback API ID + arguments) */ +#define CB_PAYLOAD_SIZE (CB_ARG_CNT + 1) + +#define ZYNQMP_PM_MAX_QOS 100U + +/* Node capabilities */ +#define ZYNQMP_PM_CAPABILITY_ACCESS 0x1U +#define ZYNQMP_PM_CAPABILITY_CONTEXT 0x2U +#define ZYNQMP_PM_CAPABILITY_WAKEUP 0x4U +#define ZYNQMP_PM_CAPABILITY_POWER 0x8U + enum pm_api_id { PM_GET_API_VERSION = 1, + PM_REQUEST_NODE = 13, + PM_RELEASE_NODE, + PM_SET_REQUIREMENT, + PM_RESET_ASSERT = 17, + PM_RESET_GET_STATUS, + PM_PM_INIT_FINALIZE = 21, + PM_GET_CHIPID = 24, PM_IOCTL = 34, PM_QUERY_DATA, PM_CLOCK_ENABLE, @@ -75,6 +98,149 @@ enum pm_query_id { PM_QID_CLOCK_GET_NUM_CLOCKS = 12, }; +enum zynqmp_pm_reset_action { + PM_RESET_ACTION_RELEASE, + PM_RESET_ACTION_ASSERT, + PM_RESET_ACTION_PULSE, +}; + +enum zynqmp_pm_reset { + ZYNQMP_PM_RESET_START = 1000, + ZYNQMP_PM_RESET_PCIE_CFG = ZYNQMP_PM_RESET_START, + ZYNQMP_PM_RESET_PCIE_BRIDGE, + ZYNQMP_PM_RESET_PCIE_CTRL, + ZYNQMP_PM_RESET_DP, + ZYNQMP_PM_RESET_SWDT_CRF, + ZYNQMP_PM_RESET_AFI_FM5, + ZYNQMP_PM_RESET_AFI_FM4, + ZYNQMP_PM_RESET_AFI_FM3, + ZYNQMP_PM_RESET_AFI_FM2, + ZYNQMP_PM_RESET_AFI_FM1, + ZYNQMP_PM_RESET_AFI_FM0, + ZYNQMP_PM_RESET_GDMA, + ZYNQMP_PM_RESET_GPU_PP1, + ZYNQMP_PM_RESET_GPU_PP0, + ZYNQMP_PM_RESET_GPU, + ZYNQMP_PM_RESET_GT, + ZYNQMP_PM_RESET_SATA, + ZYNQMP_PM_RESET_ACPU3_PWRON, + ZYNQMP_PM_RESET_ACPU2_PWRON, + ZYNQMP_PM_RESET_ACPU1_PWRON, + ZYNQMP_PM_RESET_ACPU0_PWRON, + ZYNQMP_PM_RESET_APU_L2, + ZYNQMP_PM_RESET_ACPU3, + ZYNQMP_PM_RESET_ACPU2, + ZYNQMP_PM_RESET_ACPU1, + ZYNQMP_PM_RESET_ACPU0, + ZYNQMP_PM_RESET_DDR, + ZYNQMP_PM_RESET_APM_FPD, + ZYNQMP_PM_RESET_SOFT, + ZYNQMP_PM_RESET_GEM0, + ZYNQMP_PM_RESET_GEM1, + ZYNQMP_PM_RESET_GEM2, + ZYNQMP_PM_RESET_GEM3, + ZYNQMP_PM_RESET_QSPI, + ZYNQMP_PM_RESET_UART0, + ZYNQMP_PM_RESET_UART1, + ZYNQMP_PM_RESET_SPI0, + ZYNQMP_PM_RESET_SPI1, + ZYNQMP_PM_RESET_SDIO0, + ZYNQMP_PM_RESET_SDIO1, + ZYNQMP_PM_RESET_CAN0, + ZYNQMP_PM_RESET_CAN1, + ZYNQMP_PM_RESET_I2C0, + ZYNQMP_PM_RESET_I2C1, + ZYNQMP_PM_RESET_TTC0, + ZYNQMP_PM_RESET_TTC1, + ZYNQMP_PM_RESET_TTC2, + ZYNQMP_PM_RESET_TTC3, + ZYNQMP_PM_RESET_SWDT_CRL, + ZYNQMP_PM_RESET_NAND, + ZYNQMP_PM_RESET_ADMA, + ZYNQMP_PM_RESET_GPIO, + ZYNQMP_PM_RESET_IOU_CC, + ZYNQMP_PM_RESET_TIMESTAMP, + ZYNQMP_PM_RESET_RPU_R50, + ZYNQMP_PM_RESET_RPU_R51, + ZYNQMP_PM_RESET_RPU_AMBA, + ZYNQMP_PM_RESET_OCM, + ZYNQMP_PM_RESET_RPU_PGE, + ZYNQMP_PM_RESET_USB0_CORERESET, + ZYNQMP_PM_RESET_USB1_CORERESET, + ZYNQMP_PM_RESET_USB0_HIBERRESET, + ZYNQMP_PM_RESET_USB1_HIBERRESET, + ZYNQMP_PM_RESET_USB0_APB, + ZYNQMP_PM_RESET_USB1_APB, + ZYNQMP_PM_RESET_IPI, + ZYNQMP_PM_RESET_APM_LPD, + ZYNQMP_PM_RESET_RTC, + ZYNQMP_PM_RESET_SYSMON, + ZYNQMP_PM_RESET_AFI_FM6, + ZYNQMP_PM_RESET_LPD_SWDT, + ZYNQMP_PM_RESET_FPD, + ZYNQMP_PM_RESET_RPU_DBG1, + ZYNQMP_PM_RESET_RPU_DBG0, + ZYNQMP_PM_RESET_DBG_LPD, + ZYNQMP_PM_RESET_DBG_FPD, + ZYNQMP_PM_RESET_APLL, + ZYNQMP_PM_RESET_DPLL, + ZYNQMP_PM_RESET_VPLL, + ZYNQMP_PM_RESET_IOPLL, + ZYNQMP_PM_RESET_RPLL, + ZYNQMP_PM_RESET_GPO3_PL_0, + ZYNQMP_PM_RESET_GPO3_PL_1, + ZYNQMP_PM_RESET_GPO3_PL_2, + ZYNQMP_PM_RESET_GPO3_PL_3, + ZYNQMP_PM_RESET_GPO3_PL_4, + ZYNQMP_PM_RESET_GPO3_PL_5, + ZYNQMP_PM_RESET_GPO3_PL_6, + ZYNQMP_PM_RESET_GPO3_PL_7, + ZYNQMP_PM_RESET_GPO3_PL_8, + ZYNQMP_PM_RESET_GPO3_PL_9, + ZYNQMP_PM_RESET_GPO3_PL_10, + ZYNQMP_PM_RESET_GPO3_PL_11, + ZYNQMP_PM_RESET_GPO3_PL_12, + ZYNQMP_PM_RESET_GPO3_PL_13, + ZYNQMP_PM_RESET_GPO3_PL_14, + ZYNQMP_PM_RESET_GPO3_PL_15, + ZYNQMP_PM_RESET_GPO3_PL_16, + ZYNQMP_PM_RESET_GPO3_PL_17, + ZYNQMP_PM_RESET_GPO3_PL_18, + ZYNQMP_PM_RESET_GPO3_PL_19, + ZYNQMP_PM_RESET_GPO3_PL_20, + ZYNQMP_PM_RESET_GPO3_PL_21, + ZYNQMP_PM_RESET_GPO3_PL_22, + ZYNQMP_PM_RESET_GPO3_PL_23, + ZYNQMP_PM_RESET_GPO3_PL_24, + ZYNQMP_PM_RESET_GPO3_PL_25, + ZYNQMP_PM_RESET_GPO3_PL_26, + ZYNQMP_PM_RESET_GPO3_PL_27, + ZYNQMP_PM_RESET_GPO3_PL_28, + ZYNQMP_PM_RESET_GPO3_PL_29, + ZYNQMP_PM_RESET_GPO3_PL_30, + ZYNQMP_PM_RESET_GPO3_PL_31, + ZYNQMP_PM_RESET_RPU_LS, + ZYNQMP_PM_RESET_PS_ONLY, + ZYNQMP_PM_RESET_PL, + ZYNQMP_PM_RESET_PS_PL0, + ZYNQMP_PM_RESET_PS_PL1, + ZYNQMP_PM_RESET_PS_PL2, + ZYNQMP_PM_RESET_PS_PL3, + ZYNQMP_PM_RESET_END = ZYNQMP_PM_RESET_PS_PL3 +}; + +enum zynqmp_pm_suspend_reason { + SUSPEND_POWER_REQUEST = 201, + SUSPEND_ALERT, + SUSPEND_SYSTEM_SHUTDOWN, +}; + +enum zynqmp_pm_request_ack { + ZYNQMP_PM_REQUEST_ACK_NO = 1, + ZYNQMP_PM_REQUEST_ACK_BLOCKING, + ZYNQMP_PM_REQUEST_ACK_NON_BLOCKING, +}; + /** * struct zynqmp_pm_query_data - PM query data * @qid: query ID @@ -91,6 +257,7 @@ struct zynqmp_pm_query_data { struct zynqmp_eemi_ops { int (*get_api_version)(u32 *version); + int (*get_chipid)(u32 *idcode, u32 *version); int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out); int (*clock_enable)(u32 clock_id); int (*clock_disable)(u32 clock_id); @@ -102,8 +269,25 @@ struct zynqmp_eemi_ops { int (*clock_setparent)(u32 clock_id, u32 parent_id); int (*clock_getparent)(u32 clock_id, u32 *parent_id); int (*ioctl)(u32 node_id, u32 ioctl_id, u32 arg1, u32 arg2, u32 *out); + int (*reset_assert)(const enum zynqmp_pm_reset reset, + const enum zynqmp_pm_reset_action assert_flag); + int (*reset_get_status)(const enum zynqmp_pm_reset reset, u32 *status); + int (*init_finalize)(void); + int (*set_suspend_mode)(u32 mode); + int (*request_node)(const u32 node, + const u32 capabilities, + const u32 qos, + const enum zynqmp_pm_request_ack ack); + int (*release_node)(const u32 node); + int (*set_requirement)(const u32 node, + const u32 capabilities, + const u32 qos, + const enum zynqmp_pm_request_ack ack); }; +int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1, + u32 arg2, u32 arg3, u32 *ret_payload); + #if IS_REACHABLE(CONFIG_ARCH_ZYNQMP) const struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void); #else |