diff options
| -rw-r--r-- | arch/arm/mach-omap1/board-ams-delta.c | 63 | ||||
| -rw-r--r-- | drivers/input/serio/ams_delta_serio.c | 37 |
2 files changed, 89 insertions, 11 deletions
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 02b8e217bcbc2..6573e10149085 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -526,6 +526,46 @@ static struct platform_device ams_delta_serio_device = { .id = PLATFORM_DEVID_NONE, }; +static struct regulator_consumer_supply keybrd_pwr_consumers[] = { + /* + * Initialize supply .dev_name with NULL. It will be replaced + * with serio dev_name() as soon as the serio device is registered. + */ + REGULATOR_SUPPLY("vcc", NULL), +}; + +static struct regulator_init_data keybrd_pwr_initdata = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(keybrd_pwr_consumers), + .consumer_supplies = keybrd_pwr_consumers, +}; + +static struct fixed_voltage_config keybrd_pwr_config = { + .supply_name = "keybrd_pwr", + .microvolts = 5000000, + .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR, + .enable_high = 1, + .init_data = &keybrd_pwr_initdata, +}; + +static struct platform_device keybrd_pwr_device = { + .name = "reg-fixed-voltage", + .id = PLATFORM_DEVID_AUTO, + .dev = { + .platform_data = &keybrd_pwr_config, + }, +}; + +static struct gpiod_lookup_table keybrd_pwr_gpio_table = { + .table = { + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_KEYBRD_PWR, NULL, + GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct platform_device *ams_delta_devices[] __initdata = { &latch1_gpio_device, &latch2_gpio_device, @@ -543,6 +583,7 @@ static struct platform_device *late_devices[] __initdata = { static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = { &ams_delta_audio_gpio_table, + &keybrd_pwr_gpio_table, }; static struct gpiod_lookup_table *late_gpio_tables[] __initdata = { @@ -598,12 +639,30 @@ static void __init ams_delta_init(void) platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); /* - * As soon as devices have been registered, assign their dev_names - * to respective GPIO lookup tables before they are added. + * As soon as regulator consumers have been registered, assign their + * dev_names to consumer supply entries of respective regulators. + */ + keybrd_pwr_consumers[0].dev_name = + dev_name(&ams_delta_serio_device.dev); + + /* + * Once consumer supply entries are populated with dev_names, + * register regulator devices. At this stage only the keyboard + * power regulator has its consumer supply table fully populated. + */ + platform_device_register(&keybrd_pwr_device); + + /* + * As soon as GPIO consumers have been registered, assign + * their dev_names to respective GPIO lookup tables. */ ams_delta_audio_gpio_table.dev_id = dev_name(&ams_delta_audio_device.dev); + keybrd_pwr_gpio_table.dev_id = dev_name(&keybrd_pwr_device.dev); + /* + * Once GPIO lookup tables are populated with dev_names, register them. + */ gpiod_add_lookup_tables(ams_delta_gpio_tables, ARRAY_SIZE(ams_delta_gpio_tables)); diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c index 551a4fa73fe4b..854d0d3ada52c 100644 --- a/drivers/input/serio/ams_delta_serio.c +++ b/drivers/input/serio/ams_delta_serio.c @@ -23,6 +23,7 @@ #include <linux/gpio.h> #include <linux/irq.h> #include <linux/platform_device.h> +#include <linux/regulator/consumer.h> #include <linux/serio.h> #include <linux/slab.h> #include <linux/module.h> @@ -39,6 +40,7 @@ MODULE_LICENSE("GPL"); struct ams_delta_serio { struct serio *serio; + struct regulator *vcc; }; static int check_data(struct serio *serio, int data) @@ -94,16 +96,18 @@ static irqreturn_t ams_delta_serio_interrupt(int irq, void *dev_id) static int ams_delta_serio_open(struct serio *serio) { - /* enable keyboard */ - gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 1); + struct ams_delta_serio *priv = serio->port_data; - return 0; + /* enable keyboard */ + return regulator_enable(priv->vcc); } static void ams_delta_serio_close(struct serio *serio) { + struct ams_delta_serio *priv = serio->port_data; + /* disable keyboard */ - gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 0); + regulator_disable(priv->vcc); } static const struct gpio ams_delta_gpios[] __initconst_or_module = { @@ -118,11 +122,6 @@ static const struct gpio ams_delta_gpios[] __initconst_or_module = { .label = "serio-clock", }, { - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR, - .flags = GPIOF_OUT_INIT_LOW, - .label = "serio-power", - }, - { .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT, .flags = GPIOF_OUT_INIT_LOW, .label = "serio-dataout", @@ -146,6 +145,26 @@ static int ams_delta_serio_init(struct platform_device *pdev) goto serio; } + priv->vcc = devm_regulator_get(&pdev->dev, "vcc"); + if (IS_ERR(priv->vcc)) { + err = PTR_ERR(priv->vcc); + dev_err(&pdev->dev, "regulator request failed (%d)\n", err); + /* + * When running on a non-dt platform and requested regulator + * is not available, devm_regulator_get() never returns + * -EPROBE_DEFER as it is not able to justify if the regulator + * may still appear later. On the other hand, the board can + * still set full constriants flag at late_initcall in order + * to instruct devm_regulator_get() to returnn a dummy one + * if sufficient. Hence, if we get -ENODEV here, let's convert + * it to -EPROBE_DEFER and wait for the board to decide or + * let Deferred Probe infrastructure handle this error. + */ + if (err == -ENODEV) + err = -EPROBE_DEFER; + goto gpio; + } + err = request_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), ams_delta_serio_interrupt, IRQ_TYPE_EDGE_RISING, DRIVER_NAME, priv); |