diff options
Diffstat (limited to 'Documentation/media')
20 files changed, 122 insertions, 76 deletions
diff --git a/Documentation/media/kapi/cec-core.rst b/Documentation/media/kapi/cec-core.rst index a9f53f069a2da..1d989c5443705 100644 --- a/Documentation/media/kapi/cec-core.rst +++ b/Documentation/media/kapi/cec-core.rst @@ -246,7 +246,10 @@ CEC_TX_STATUS_LOW_DRIVE: CEC_TX_STATUS_ERROR: some unspecified error occurred: this can be one of ARB_LOST or LOW_DRIVE if the hardware cannot differentiate or something - else entirely. + else entirely. Some hardware only supports OK and FAIL as the + result of a transmit, i.e. there is no way to differentiate + between the different possible errors. In that case map FAIL + to CEC_TX_STATUS_NACK and not to CEC_TX_STATUS_ERROR. CEC_TX_STATUS_MAX_RETRIES: could not transmit the message after trying multiple times. diff --git a/Documentation/media/uapi/cec/cec-ioc-receive.rst b/Documentation/media/uapi/cec/cec-ioc-receive.rst index bdad4b197bcd4..e964074cd15b7 100644 --- a/Documentation/media/uapi/cec/cec-ioc-receive.rst +++ b/Documentation/media/uapi/cec/cec-ioc-receive.rst @@ -231,26 +231,32 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV'). - ``CEC_TX_STATUS_OK`` - 0x01 - The message was transmitted successfully. This is mutually - exclusive with :ref:`CEC_TX_STATUS_MAX_RETRIES <CEC-TX-STATUS-MAX-RETRIES>`. Other bits can still - be set if earlier attempts met with failure before the transmit - was eventually successful. + exclusive with :ref:`CEC_TX_STATUS_MAX_RETRIES <CEC-TX-STATUS-MAX-RETRIES>`. + Other bits can still be set if earlier attempts met with failure before + the transmit was eventually successful. * .. _`CEC-TX-STATUS-ARB-LOST`: - ``CEC_TX_STATUS_ARB_LOST`` - 0x02 - - CEC line arbitration was lost. + - CEC line arbitration was lost, i.e. another transmit started at the + same time with a higher priority. Optional status, not all hardware + can detect this error condition. * .. _`CEC-TX-STATUS-NACK`: - ``CEC_TX_STATUS_NACK`` - 0x04 - - Message was not acknowledged. + - Message was not acknowledged. Note that some hardware cannot tell apart + a 'Not Acknowledged' status from other error conditions, i.e. the result + of a transmit is just OK or FAIL. In that case this status will be + returned when the transmit failed. * .. _`CEC-TX-STATUS-LOW-DRIVE`: - ``CEC_TX_STATUS_LOW_DRIVE`` - 0x08 - Low drive was detected on the CEC bus. This indicates that a follower detected an error on the bus and requests a - retransmission. + retransmission. Optional status, not all hardware can detect this + error condition. * .. _`CEC-TX-STATUS-ERROR`: - ``CEC_TX_STATUS_ERROR`` @@ -258,14 +264,14 @@ View On' messages from initiator 0xf ('Unregistered') to destination 0 ('TV'). - Some error occurred. This is used for any errors that do not fit ``CEC_TX_STATUS_ARB_LOST`` or ``CEC_TX_STATUS_LOW_DRIVE``, either because the hardware could not tell which error occurred, or because the hardware - tested for other conditions besides those two. + tested for other conditions besides those two. Optional status. * .. _`CEC-TX-STATUS-MAX-RETRIES`: - ``CEC_TX_STATUS_MAX_RETRIES`` - 0x20 - The transmit failed after one or more retries. This status bit is - mutually exclusive with :ref:`CEC_TX_STATUS_OK <CEC-TX-STATUS-OK>`. Other bits can still - be set to explain which failures were seen. + mutually exclusive with :ref:`CEC_TX_STATUS_OK <CEC-TX-STATUS-OK>`. + Other bits can still be set to explain which failures were seen. .. tabularcolumns:: |p{5.6cm}|p{0.9cm}|p{11.0cm}| diff --git a/Documentation/media/uapi/dvb/dvbapi.rst b/Documentation/media/uapi/dvb/dvbapi.rst index 18c86b3a3af1e..89ddca38626f9 100644 --- a/Documentation/media/uapi/dvb/dvbapi.rst +++ b/Documentation/media/uapi/dvb/dvbapi.rst @@ -62,7 +62,7 @@ Authors: - Original author of the Digital TV API documentation. -- Carvalho Chehab, Mauro <m.chehab@kernel.org> +- Carvalho Chehab, Mauro <mchehab+samsung@kernel.org> - Ported document to Docbook XML, addition of DVBv5 API, documentation gaps fix. diff --git a/Documentation/media/uapi/rc/keytable.c.rst b/Documentation/media/uapi/rc/keytable.c.rst index e6ce1e3f5a78a..217237f93b378 100644 --- a/Documentation/media/uapi/rc/keytable.c.rst +++ b/Documentation/media/uapi/rc/keytable.c.rst @@ -7,7 +7,7 @@ file: uapi/v4l/keytable.c /* keytable.c - This program allows checking/replacing keys at IR - Copyright (C) 2006-2009 Mauro Carvalho Chehab <mchehab@infradead.org> + Copyright (C) 2006-2009 Mauro Carvalho Chehab <mchehab@kernel.org> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/Documentation/media/uapi/rc/lirc-dev-intro.rst b/Documentation/media/uapi/rc/lirc-dev-intro.rst index 698e4f80270e6..11516c8bff62d 100644 --- a/Documentation/media/uapi/rc/lirc-dev-intro.rst +++ b/Documentation/media/uapi/rc/lirc-dev-intro.rst @@ -18,7 +18,7 @@ Example dmesg output upon a driver registering w/LIRC: .. code-block:: none $ dmesg |grep lirc_dev - rc rc0: lirc_dev: driver mceusb registered at minor = 0 + rc rc0: lirc_dev: driver mceusb registered at minor = 0, raw IR receiver, raw IR transmitter What you should see for a chardev: diff --git a/Documentation/media/uapi/rc/lirc-set-rec-timeout.rst b/Documentation/media/uapi/rc/lirc-set-rec-timeout.rst index b3e16bbdbc90f..a833a6a4c25a7 100644 --- a/Documentation/media/uapi/rc/lirc-set-rec-timeout.rst +++ b/Documentation/media/uapi/rc/lirc-set-rec-timeout.rst @@ -1,19 +1,23 @@ .. -*- coding: utf-8; mode: rst -*- .. _lirc_set_rec_timeout: +.. _lirc_get_rec_timeout: -************************** -ioctl LIRC_SET_REC_TIMEOUT -************************** +*************************************************** +ioctl LIRC_GET_REC_TIMEOUT and LIRC_SET_REC_TIMEOUT +*************************************************** Name ==== -LIRC_SET_REC_TIMEOUT - sets the integer value for IR inactivity timeout. +LIRC_GET_REC_TIMEOUT/LIRC_SET_REC_TIMEOUT - Get/set the integer value for IR inactivity timeout. Synopsis ======== +.. c:function:: int ioctl( int fd, LIRC_GET_REC_TIMEOUT, __u32 *timeout ) + :name: LIRC_GET_REC_TIMEOUT + .. c:function:: int ioctl( int fd, LIRC_SET_REC_TIMEOUT, __u32 *timeout ) :name: LIRC_SET_REC_TIMEOUT @@ -30,7 +34,7 @@ Arguments Description =========== -Sets the integer value for IR inactivity timeout. +Get and set the integer value for IR inactivity timeout. If supported by the hardware, setting it to 0 disables all hardware timeouts and data should be reported as soon as possible. If the exact value diff --git a/Documentation/media/uapi/v4l/common.rst b/Documentation/media/uapi/v4l/common.rst index 13f2ed3fc5a6c..5f93e71122efe 100644 --- a/Documentation/media/uapi/v4l/common.rst +++ b/Documentation/media/uapi/v4l/common.rst @@ -41,6 +41,6 @@ applicable to all devices. extended-controls format planar-apis - crop selection-api + crop streaming-par diff --git a/Documentation/media/uapi/v4l/crop.rst b/Documentation/media/uapi/v4l/crop.rst index 182565b9ace49..45e8a895a3202 100644 --- a/Documentation/media/uapi/v4l/crop.rst +++ b/Documentation/media/uapi/v4l/crop.rst @@ -2,9 +2,18 @@ .. _crop: -************************************* -Image Cropping, Insertion and Scaling -************************************* +***************************************************** +Image Cropping, Insertion and Scaling -- the CROP API +***************************************************** + +.. note:: + + The CROP API is mostly superseded by the newer :ref:`SELECTION API + <selection-api>`. The new API should be preferred in most cases, + with the exception of pixel aspect ratio detection, which is + implemented by :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>` and has no + equivalent in the SELECTION API. See :ref:`selection-vs-crop` for a + comparison of the two APIs. Some video capture devices can sample a subsection of the picture and shrink or enlarge it to an image of arbitrary size. We call these @@ -42,10 +51,9 @@ where applicable) will be fixed in this case. .. note:: - All capture and output devices must support the - :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>` ioctl such that applications - can determine if scaling takes place. - + All capture and output devices that support the CROP or SELECTION + API will also support the :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>` + ioctl. Cropping Structures =================== diff --git a/Documentation/media/uapi/v4l/selection-api-005.rst b/Documentation/media/uapi/v4l/selection-api-005.rst deleted file mode 100644 index 5b47a28ac6d7e..0000000000000 --- a/Documentation/media/uapi/v4l/selection-api-005.rst +++ /dev/null @@ -1,34 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -******************************** -Comparison with old cropping API -******************************** - -The selection API was introduced to cope with deficiencies of previous -:ref:`API <crop>`, that was designed to control simple capture -devices. Later the cropping API was adopted by video output drivers. The -ioctls are used to select a part of the display were the video signal is -inserted. It should be considered as an API abuse because the described -operation is actually the composing. The selection API makes a clear -distinction between composing and cropping operations by setting the -appropriate targets. The V4L2 API lacks any support for composing to and -cropping from an image inside a memory buffer. The application could -configure a capture device to fill only a part of an image by abusing -V4L2 API. Cropping a smaller image from a larger one is achieved by -setting the field ``bytesperline`` at struct -:c:type:`v4l2_pix_format`. -Introducing an image offsets could be done by modifying field ``m_userptr`` -at struct -:c:type:`v4l2_buffer` before calling -:ref:`VIDIOC_QBUF`. Those operations should be avoided because they are not -portable (endianness), and do not work for macroblock and Bayer formats -and mmap buffers. The selection API deals with configuration of buffer -cropping/composing in a clear, intuitive and portable way. Next, with -the selection API the concepts of the padded target and constraints -flags are introduced. Finally, struct :c:type:`v4l2_crop` -and struct :c:type:`v4l2_cropcap` have no reserved -fields. Therefore there is no way to extend their functionality. The new -struct :c:type:`v4l2_selection` provides a lot of place -for future extensions. Driver developers are encouraged to implement -only selection API. The former cropping API would be simulated using the -new one. diff --git a/Documentation/media/uapi/v4l/selection-api-004.rst b/Documentation/media/uapi/v4l/selection-api-configuration.rst index d782cd5b2117a..0a4ddc2d71dbc 100644 --- a/Documentation/media/uapi/v4l/selection-api-004.rst +++ b/Documentation/media/uapi/v4l/selection-api-configuration.rst @@ -41,7 +41,7 @@ The driver may further adjust the requested size and/or position according to hardware limitations. Each capture device has a default source rectangle, given by the -``V4L2_SEL_TGT_CROP_DEFAULT`` target. This rectangle shall over what the +``V4L2_SEL_TGT_CROP_DEFAULT`` target. This rectangle shall cover what the driver writer considers the complete picture. Drivers shall set the active crop rectangle to the default when the driver is first loaded, but not later. diff --git a/Documentation/media/uapi/v4l/selection-api-006.rst b/Documentation/media/uapi/v4l/selection-api-examples.rst index 67e0e9aed9e82..67e0e9aed9e82 100644 --- a/Documentation/media/uapi/v4l/selection-api-006.rst +++ b/Documentation/media/uapi/v4l/selection-api-examples.rst diff --git a/Documentation/media/uapi/v4l/selection-api-002.rst b/Documentation/media/uapi/v4l/selection-api-intro.rst index 09ca93f91bf76..09ca93f91bf76 100644 --- a/Documentation/media/uapi/v4l/selection-api-002.rst +++ b/Documentation/media/uapi/v4l/selection-api-intro.rst diff --git a/Documentation/media/uapi/v4l/selection-api-003.rst b/Documentation/media/uapi/v4l/selection-api-targets.rst index bf7e76dfbdf96..bf7e76dfbdf96 100644 --- a/Documentation/media/uapi/v4l/selection-api-003.rst +++ b/Documentation/media/uapi/v4l/selection-api-targets.rst diff --git a/Documentation/media/uapi/v4l/selection-api-vs-crop-api.rst b/Documentation/media/uapi/v4l/selection-api-vs-crop-api.rst new file mode 100644 index 0000000000000..e7455fb1e572f --- /dev/null +++ b/Documentation/media/uapi/v4l/selection-api-vs-crop-api.rst @@ -0,0 +1,39 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _selection-vs-crop: + +******************************** +Comparison with old cropping API +******************************** + +The selection API was introduced to cope with deficiencies of the +older :ref:`CROP API <crop>`, that was designed to control simple +capture devices. Later the cropping API was adopted by video output +drivers. The ioctls are used to select a part of the display were the +video signal is inserted. It should be considered as an API abuse +because the described operation is actually the composing. The +selection API makes a clear distinction between composing and cropping +operations by setting the appropriate targets. + +The CROP API lacks any support for composing to and cropping from an +image inside a memory buffer. The application could configure a +capture device to fill only a part of an image by abusing V4L2 +API. Cropping a smaller image from a larger one is achieved by setting +the field ``bytesperline`` at struct :c:type:`v4l2_pix_format`. +Introducing an image offsets could be done by modifying field +``m_userptr`` at struct :c:type:`v4l2_buffer` before calling +:ref:`VIDIOC_QBUF <VIDIOC_QBUF>`. Those operations should be avoided +because they are not portable (endianness), and do not work for +macroblock and Bayer formats and mmap buffers. + +The selection API deals with configuration of buffer +cropping/composing in a clear, intuitive and portable way. Next, with +the selection API the concepts of the padded target and constraints +flags are introduced. Finally, struct :c:type:`v4l2_crop` and struct +:c:type:`v4l2_cropcap` have no reserved fields. Therefore there is no +way to extend their functionality. The new struct +:c:type:`v4l2_selection` provides a lot of place for future +extensions. + +Driver developers are encouraged to implement only selection API. The +former cropping API would be simulated using the new one. diff --git a/Documentation/media/uapi/v4l/selection-api.rst b/Documentation/media/uapi/v4l/selection-api.rst index 81ea52d785b91..390233f704a38 100644 --- a/Documentation/media/uapi/v4l/selection-api.rst +++ b/Documentation/media/uapi/v4l/selection-api.rst @@ -2,15 +2,15 @@ .. _selection-api: -API for cropping, composing and scaling -======================================= +Cropping, composing and scaling -- the SELECTION API +==================================================== .. toctree:: :maxdepth: 1 - selection-api-002 - selection-api-003 - selection-api-004 - selection-api-005 - selection-api-006 + selection-api-intro.rst + selection-api-targets.rst + selection-api-configuration.rst + selection-api-vs-crop-api.rst + selection-api-examples.rst diff --git a/Documentation/media/uapi/v4l/selection.svg b/Documentation/media/uapi/v4l/selection.svg index a93e3b59786db..911062bd28446 100644 --- a/Documentation/media/uapi/v4l/selection.svg +++ b/Documentation/media/uapi/v4l/selection.svg @@ -1128,11 +1128,11 @@ </text> </g> <text transform="matrix(.96106 0 0 1.0405 48.571 195.53)" x="2438.062" y="1368.429" enable-background="new" font-size="50" style="line-height:125%"> - <tspan x="2438.062" y="1368.429">COMPOSE_BONDS</tspan> + <tspan x="2438.062" y="1368.429">COMPOSE_BOUNDS</tspan> </text> <g font-size="40"> <text transform="translate(48.571 195.53)" x="8.082" y="1438.896" enable-background="new" style="line-height:125%"> - <tspan x="8.082" y="1438.896" font-size="50">CROP_BONDS</tspan> + <tspan x="8.082" y="1438.896" font-size="50">CROP_BOUNDS</tspan> </text> <text transform="translate(48.571 195.53)" x="1455.443" y="-26.808" enable-background="new" style="line-height:125%"> <tspan x="1455.443" y="-26.808" font-size="50">overscan area</tspan> diff --git a/Documentation/media/uapi/v4l/v4l2.rst b/Documentation/media/uapi/v4l/v4l2.rst index 2128717299b3b..b89e5621ae69c 100644 --- a/Documentation/media/uapi/v4l/v4l2.rst +++ b/Documentation/media/uapi/v4l/v4l2.rst @@ -45,7 +45,7 @@ Authors, in alphabetical order: - Subdev selections API. -- Carvalho Chehab, Mauro <m.chehab@kernel.org> +- Carvalho Chehab, Mauro <mchehab+samsung@kernel.org> - Documented libv4l, designed and added v4l2grab example, Remote Controller chapter. diff --git a/Documentation/media/uapi/v4l/v4l2grab.c.rst b/Documentation/media/uapi/v4l/v4l2grab.c.rst index 5aabd0b7b0899..f0d0ab6abd413 100644 --- a/Documentation/media/uapi/v4l/v4l2grab.c.rst +++ b/Documentation/media/uapi/v4l/v4l2grab.c.rst @@ -6,7 +6,7 @@ file: media/v4l/v4l2grab.c .. code-block:: c /* V4L2 video picture grabber - Copyright (C) 2009 Mauro Carvalho Chehab <mchehab@infradead.org> + Copyright (C) 2009 Mauro Carvalho Chehab <mchehab@kernel.org> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/Documentation/media/v4l-drivers/cx23885-cardlist.rst b/Documentation/media/v4l-drivers/cx23885-cardlist.rst index 3129ef04ddd39..8c24df8e0423f 100644 --- a/Documentation/media/v4l-drivers/cx23885-cardlist.rst +++ b/Documentation/media/v4l-drivers/cx23885-cardlist.rst @@ -186,7 +186,7 @@ cx23885 cards list * - 43 - Hauppauge ImpactVCB-e - - 0070:7133 + - 0070:7133, 0070:7137 * - 44 - DViCO FusionHDTV DVB-T Dual Express2 @@ -243,3 +243,19 @@ cx23885 cards list * - 57 - Hauppauge WinTV-QuadHD-ATSC - 0070:6a18, 0070:6b18 + + * - 58 + - Hauppauge WinTV-HVR-1265(161111) + - 0070:2a18 + + * - 59 + - Hauppauge WinTV-Starburst2 + - 0070:f02a + + * - 60 + - Hauppauge WinTV-QuadHD-DVB(885) + - + + * - 61 + - Hauppauge WinTV-QuadHD-ATSC(885) + - diff --git a/Documentation/media/v4l-drivers/em28xx-cardlist.rst b/Documentation/media/v4l-drivers/em28xx-cardlist.rst index ec938c08f43d8..dfe882ca945f7 100644 --- a/Documentation/media/v4l-drivers/em28xx-cardlist.rst +++ b/Documentation/media/v4l-drivers/em28xx-cardlist.rst @@ -391,7 +391,7 @@ EM28xx cards list * - 94 - PCTV tripleStick (292e) - em28178 - - 2013:025f, 2040:0264 + - 2013:025f, 2013:0264, 2040:0264, 2040:8264, 2040:8268, 2040:8268 * - 95 - Leadtek VC100 - em2861 @@ -411,12 +411,16 @@ EM28xx cards list * - 99 - Hauppauge WinTV-dualHD DVB - em28174 - - 2040:0265 + - 2040:0265, 2040:8265 * - 100 - Hauppauge WinTV-dualHD 01595 ATSC/QAM - em28174 - - 2040:026d + - 2040:026d, 2040:826d * - 101 - Terratec Cinergy H6 rev. 2 - em2884 - 0ccd:10b2 + * - 102 + - :ZOLID HYBRID TV STICK + - em2882 + - |
