diff options
Diffstat (limited to 'arch/arm/boot/dts/sama5d2.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/sama5d2.dtsi | 123 |
1 files changed, 78 insertions, 45 deletions
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 61f68e5c48e96..843052f14f1cf 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/dma/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/at91.h> +#include <dt-bindings/iio/adc/at91-sama5d2_adc.h> / { model = "Atmel SAMA5D2 family SoC"; @@ -58,6 +59,8 @@ serial1 = &uart3; tcb0 = &tcb0; tcb1 = &tcb1; + i2s0 = &i2s0; + i2s1 = &i2s1; }; cpus { @@ -84,10 +87,11 @@ clocks = <&mck>; clock-names = "apb_pclk"; - port { - etb_in: endpoint { - slave-mode; - remote-endpoint = <&etm_out>; + in-ports { + port { + etb_in: endpoint { + remote-endpoint = <&etm_out>; + }; }; }; }; @@ -99,9 +103,11 @@ clocks = <&mck>; clock-names = "apb_pclk"; - port { - etm_out: endpoint { - remote-endpoint = <&etb_in>; + out-ports { + port { + etm_out: endpoint { + remote-endpoint = <&etb_in>; + }; }; }; }; @@ -323,44 +329,6 @@ }; }; - nand0: nand@80000000 { - compatible = "atmel,sama5d2-nand"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - reg = < /* EBI CS3 */ - 0x80000000 0x08000000 - /* SMC PMECC regs */ - 0xf8014070 0x00000490 - /* SMC PMECC Error Location regs */ - 0xf8014500 0x00000200 - /* ROM Galois tables */ - 0x00040000 0x00018000 - >; - interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - atmel,nand-has-dma; - atmel,has-pmecc; - atmel,pmecc-lookup-table-offset = <0x0 0x8000>; - status = "disabled"; - - nfc@c0000000 { - compatible = "atmel,sama5d3-nfc"; - #address-cells = <1>; - #size-cells = <1>; - reg = < /* NFC Command Registers */ - 0xc0000000 0x08000000 - /* NFC HSMC regs */ - 0xf8014000 0x00000070 - /* NFC SRAM banks */ - 0x00100000 0x00100000 - >; - clocks = <&hsmc_clk>; - atmel,write-by-sram; - }; - }; - sdmmc0: sdio-host@a0000000 { compatible = "atmel,sama5d2-sdhci"; reg = <0xa0000000 0x300>; @@ -992,6 +960,24 @@ atmel,clk-output-range = <0 100000000>; }; }; + + i2s_clkmux { + compatible = "atmel,sama5d2-clk-i2s-mux"; + #address-cells = <1>; + #size-cells = <0>; + + i2s0muxck: i2s0_muxclk { + clocks = <&i2s0_clk>, <&i2s0_gclk>; + #clock-cells = <0>; + reg = <0>; + }; + + i2s1muxck: i2s1_muxclk { + clocks = <&i2s1_clk>, <&i2s1_gclk>; + #clock-cells = <0>; + reg = <1>; + }; + }; }; qspi0: spi@f0020000 { @@ -1295,6 +1281,24 @@ clocks = <&clk32k>; }; + i2s0: i2s@f8050000 { + compatible = "atmel,sama5d2-i2s"; + reg = <0xf8050000 0x100>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(31))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(32))>; + dma-names = "tx", "rx"; + clocks = <&i2s0_clk>, <&i2s0_gclk>; + clock-names = "pclk", "gclk"; + assigned-clocks = <&i2s0muxck>; + assigned-clock-parents = <&i2s0_gclk>; + status = "disabled"; + }; + can0: can@f8054000 { compatible = "bosch,m_can"; reg = <0xf8054000 0x4000>, <0x210000 0x4000>; @@ -1437,6 +1441,17 @@ atmel,max-sample-rate-hz = <20000000>; atmel,startup-time-ms = <4>; atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>; + #io-channel-cells = <1>; + status = "disabled"; + }; + + resistive_touch: resistive-touch { + compatible = "resistive-adc-touch"; + io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>, + <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>, + <&adc AT91_SAMA5D2_ADC_P_CHANNEL>; + io-channel-names = "x", "y", "pressure"; + touchscreen-min-pressure = <50000>; status = "disabled"; }; @@ -1488,6 +1503,24 @@ status = "disabled"; }; + i2s1: i2s@fc04c000 { + compatible = "atmel,sama5d2-i2s"; + reg = <0xfc04c000 0x100>; + interrupts = <55 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(33))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(34))>; + dma-names = "tx", "rx"; + clocks = <&i2s1_clk>, <&i2s1_gclk>; + clock-names = "pclk", "gclk"; + assigned-clocks = <&i2s1muxck>; + assigned-parrents = <&i2s1_gclk>; + status = "disabled"; + }; + can1: can@fc050000 { compatible = "bosch,m_can"; reg = <0xfc050000 0x4000>, <0x210000 0x4000>; |