diff options
Diffstat (limited to 'arch/arm')
116 files changed, 1775 insertions, 571 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a7f8e7f4b88fd..8f460bdd4be1c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -60,7 +60,6 @@ config ARM select HAVE_CONTEXT_TRACKING select HAVE_C_RECORDMCOUNT select HAVE_DEBUG_KMEMLEAK - select HAVE_DMA_API_DEBUG select HAVE_DMA_CONTIGUOUS if MMU select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32 && MMU select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE @@ -96,6 +95,7 @@ config ARM select HAVE_VIRT_CPU_ACCOUNTING_GEN select IRQ_FORCED_THREADING select MODULES_USE_ELF_REL + select NEED_DMA_MAP_STATE select NO_BOOTMEM select OF_EARLY_FLATTREE if OF select OF_RESERVED_MEM if OF @@ -119,9 +119,6 @@ config ARM_HAS_SG_CHAIN select ARCH_HAS_SG_CHAIN bool -config NEED_SG_DMA_LENGTH - bool - config ARM_DMA_USE_IOMMU bool select ARM_HAS_SG_CHAIN @@ -224,9 +221,6 @@ config ARCH_MAY_HAVE_PC_FDC config ZONE_DMA bool -config NEED_DMA_MAP_STATE - def_bool y - config ARCH_SUPPORTS_UPROBES def_bool y @@ -1704,6 +1698,7 @@ config ARCH_WANT_GENERAL_HUGETLB config ARM_MODULE_PLTS bool "Use PLTs to allow module memory to spill over into vmalloc area" depends on MODULES + default y help Allocate PLTs when loading modules so that jumps and calls whose targets are too far away for their relative offsets to be encoded @@ -1714,7 +1709,8 @@ config ARM_MODULE_PLTS rounding up to page size, the actual memory footprint is usually the same. - Say y if you are getting out of memory errors while loading modules + Disabling this is usually safe for small single-platform + configurations. If unsure, say y. source "mm/Kconfig" @@ -1778,12 +1774,6 @@ config SECCOMP and the task is only allowed to execute a few safe syscalls defined by each seccomp mode. -config SWIOTLB - def_bool y - -config IOMMU_HELPER - def_bool SWIOTLB - config PARAVIRT bool "Enable paravirtualization code" help @@ -1815,6 +1805,7 @@ config XEN depends on MMU select ARCH_DMA_ADDR_T_64BIT select ARM_PSCI + select SWIOTLB select SWIOTLB_XEN select PARAVIRT help diff --git a/arch/arm/Makefile b/arch/arm/Makefile index e4e537f27339f..1dc4045e1af65 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -106,7 +106,7 @@ tune-$(CONFIG_CPU_V6K) =$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm) tune-y := $(tune-y) ifeq ($(CONFIG_AEABI),y) -CFLAGS_ABI :=-mabi=aapcs-linux -mno-thumb-interwork -mfpu=vfp +CFLAGS_ABI :=-mabi=aapcs-linux -mfpu=vfp else CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,) endif @@ -135,7 +135,7 @@ endif KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float -CHECKFLAGS += -D__arm__ -m32 +CHECKFLAGS += -D__arm__ #Default value head-y := arch/arm/kernel/head$(MMUEXT).o diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 45a6b9b7af2a5..a3c5fbcad4abf 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -113,15 +113,13 @@ CFLAGS_fdt_ro.o := $(nossp_flags) CFLAGS_fdt_rw.o := $(nossp_flags) CFLAGS_fdt_wip.o := $(nossp_flags) -ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj) +ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin -I$(obj) asflags-y := -DZIMAGE # Supply kernel BSS size to the decompressor via a linker symbol. -KBSS_SZ = $(shell $(CROSS_COMPILE)nm $(obj)/../../../../vmlinux | \ - perl -e 'while (<>) { \ - $$bss_start=hex($$1) if /^([[:xdigit:]]+) B __bss_start$$/; \ - $$bss_end=hex($$1) if /^([[:xdigit:]]+) B __bss_stop$$/; \ - }; printf "%d\n", $$bss_end - $$bss_start;') +KBSS_SZ = $(shell echo $$(($$($(CROSS_COMPILE)nm $(obj)/../../../../vmlinux | \ + sed -n -e 's/^\([^ ]*\) [AB] __bss_start$$/-0x\1/p' \ + -e 's/^\([^ ]*\) [AB] __bss_stop$$/+0x\1/p') )) ) LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ) # Supply ZRELADDR to the decompressor via a linker symbol. ifneq ($(CONFIG_AUTO_ZRELADDR),y) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 45c8823c37503..517e0e18f0b83 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -29,19 +29,19 @@ #if defined(CONFIG_DEBUG_ICEDCC) #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7) - .macro loadsp, rb, tmp + .macro loadsp, rb, tmp1, tmp2 .endm .macro writeb, ch, rb mcr p14, 0, \ch, c0, c5, 0 .endm #elif defined(CONFIG_CPU_XSCALE) - .macro loadsp, rb, tmp + .macro loadsp, rb, tmp1, tmp2 .endm .macro writeb, ch, rb mcr p14, 0, \ch, c8, c0, 0 .endm #else - .macro loadsp, rb, tmp + .macro loadsp, rb, tmp1, tmp2 .endm .macro writeb, ch, rb mcr p14, 0, \ch, c1, c0, 0 @@ -57,7 +57,7 @@ .endm #if defined(CONFIG_ARCH_SA1100) - .macro loadsp, rb, tmp + .macro loadsp, rb, tmp1, tmp2 mov \rb, #0x80000000 @ physical base address #ifdef CONFIG_DEBUG_LL_SER3 add \rb, \rb, #0x00050000 @ Ser3 @@ -66,8 +66,8 @@ #endif .endm #else - .macro loadsp, rb, tmp - addruart \rb, \tmp + .macro loadsp, rb, tmp1, tmp2 + addruart \rb, \tmp1, \tmp2 .endm #endif #endif @@ -561,8 +561,6 @@ not_relocated: mov r0, #0 bl decompress_kernel bl cache_clean_flush bl cache_off - mov r1, r7 @ restore architecture number - mov r2, r8 @ restore atags pointer #ifdef CONFIG_ARM_VIRT_EXT mrs r0, spsr @ Get saved CPU boot mode @@ -1297,7 +1295,7 @@ phex: adr r3, phexbuf b 1b @ puts corrupts {r0, r1, r2, r3} -puts: loadsp r3, r1 +puts: loadsp r3, r2, r1 1: ldrb r2, [r0], #1 teq r2, #0 moveq pc, lr @@ -1314,8 +1312,8 @@ puts: loadsp r3, r1 @ putc corrupts {r0, r1, r2, r3} putc: mov r2, r0 + loadsp r3, r1, r0 mov r0, #0 - loadsp r3, r1 b 2b @ memdump corrupts {r0, r1, r2, r3, r10, r11, r12, lr} @@ -1365,6 +1363,8 @@ __hyp_reentry_vectors: __enter_kernel: mov r0, #0 @ must be 0 + mov r1, r7 @ restore architecture number + mov r2, r8 @ restore atags pointer ARM( mov pc, r4 ) @ call kernel M_CLASS( add r4, r4, #1 ) @ enter in Thumb mode for M class THUMB( bx r4 ) @ entry point is always ARM for A/R classes diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 4cc09e43eea22..6916d7532ad2c 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -163,7 +163,7 @@ }; uart0: serial@12000 { - compatible = "snps,dw-apb-uart"; + compatible = "marvell,armada-38x-uart"; reg = <0x12000 0x100>; reg-shift = <2>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; @@ -173,7 +173,7 @@ }; uart1: serial@12100 { - compatible = "snps,dw-apb-uart"; + compatible = "marvell,armada-38x-uart"; reg = <0x12100 0x100>; reg-shift = <2>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 699fdf94d139b..9fe4f5a6379e3 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -69,7 +69,7 @@ timer@20200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x20200 0x100>; - interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; clocks = <&periph_clk>; }; diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index a1f4d6d5a569b..0edf769ea95c9 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -21,8 +21,8 @@ stdout-path = "serial2:115200n8"; }; - memory { - device_type = "memory"; + memory@c0000000 { + /* 128 MB DDR2 SDRAM @ 0xc0000000 */ reg = <0xc0000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index c66cf78953639..12010002dbdb6 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -7,10 +7,19 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ -#include "skeleton.dtsi" #include <dt-bindings/interrupt-controller/irq.h> / { + #address-cells = <1>; + #size-cells = <1>; + chosen { }; + aliases { }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x0>; + }; + arm { #address-cells = <1>; #size-cells = <1>; @@ -46,8 +55,6 @@ pmx_core: pinmux@14120 { compatible = "pinctrl-single"; reg = <0x14120 0x50>; - #address-cells = <1>; - #size-cells = <0>; #pinctrl-cells = <2>; pinctrl-single,bit-per-mux; pinctrl-single,register-width = <32>; diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts index d6657b3bae84b..85d7b5148b0ac 100644 --- a/arch/arm/boot/dts/dm8148-evm.dts +++ b/arch/arm/boot/dts/dm8148-evm.dts @@ -10,7 +10,7 @@ / { model = "DM8148 EVM"; - compatible = "ti,dm8148-evm", "ti,dm8148"; + compatible = "ti,dm8148-evm", "ti,dm8148", "ti,dm814"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts index 63883b3479f95..6418f9cdbe83f 100644 --- a/arch/arm/boot/dts/dm8148-t410.dts +++ b/arch/arm/boot/dts/dm8148-t410.dts @@ -9,7 +9,7 @@ / { model = "HP t410 Smart Zero Client"; - compatible = "hp,t410", "ti,dm8148"; + compatible = "hp,t410", "ti,dm8148", "ti,dm814"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index c72a2132aa823..1d030d5673071 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -10,7 +10,7 @@ / { model = "DM8168 EVM"; - compatible = "ti,dm8168-evm", "ti,dm8168"; + compatible = "ti,dm8168-evm", "ti,dm8168", "ti,dm816"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts index fee0547f7302e..31b824ad5d29f 100644 --- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts +++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts @@ -10,7 +10,7 @@ / { model = "DRA62x J5 Eco EVM"; - compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148"; + compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148", "ti,dm814"; memory@80000000 { device_type = "memory"; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index bf343195697e8..54111ed218b10 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -303,7 +303,7 @@ }; can1: can@53fe4000 { - compatible = "fsl,imx35-flexcan"; + compatible = "fsl,imx35-flexcan", "fsl,imx25-flexcan"; reg = <0x53fe4000 0x1000>; clocks = <&clks 33>, <&clks 33>; clock-names = "ipg", "per"; @@ -312,7 +312,7 @@ }; can2: can@53fe8000 { - compatible = "fsl,imx35-flexcan"; + compatible = "fsl,imx35-flexcan", "fsl,imx25-flexcan"; reg = <0x53fe8000 0x1000>; clocks = <&clks 34>, <&clks 34>; clock-names = "ipg", "per"; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index 0c99ac04ad08b..6464f2560e066 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -523,7 +523,7 @@ }; touchscreen@20 { - compatible = "syna,rmi4_i2c"; + compatible = "syna,rmi4-i2c"; reg = <0x20>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ts>; @@ -541,8 +541,8 @@ rmi4-f11@11 { reg = <0x11>; - touch-inverted-y; - touch-swapped-x-y; + touchscreen-inverted-y; + touchscreen-swapped-x-y; syna,sensor-type = <1>; }; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 7d647d043f528..3d65c0192f693 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -551,7 +551,7 @@ }; can1: can@53fc8000 { - compatible = "fsl,imx53-flexcan"; + compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan"; reg = <0x53fc8000 0x4000>; interrupts = <82>; clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, @@ -561,7 +561,7 @@ }; can2: can@53fcc000 { - compatible = "fsl,imx53-flexcan"; + compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan"; reg = <0x53fcc000 0x4000>; interrupts = <83>; clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>, diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 4d42335c0dee9..ce85b3ca1a55f 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -868,6 +868,7 @@ crypto: caam@30900000 { compatible = "fsl,sec-v4.0"; + fsl,sec-era = <8>; #address-cells = <1>; #size-cells = <1>; reg = <0x30900000 0x40000>; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index b47cac23a04be..6fa7bba3e8015 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -26,7 +26,7 @@ gpio = <&gpio1 3 0>; /* gpio_3 */ startup-delay-us = <70000>; enable-active-high; - vin-supply = <&vmmc2>; + vin-supply = <&vaux3>; }; /* HS USB Host PHY on PORT 1 */ @@ -82,6 +82,7 @@ twl_audio: audio { compatible = "ti,twl4030-audio"; codec { + ti,hs_extmute_gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>; }; }; }; @@ -199,6 +200,7 @@ pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */ >; }; }; @@ -213,7 +215,7 @@ }; wl127x_gpio: pinmux_wl127x_gpio_pin { pinctrl-single,pins = < - OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */ + OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ >; }; @@ -260,6 +262,11 @@ #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" +&vaux3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + &twl { twl_power: power { compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle"; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 063fdb65dc60d..f07f9018c3e72 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -379,7 +379,7 @@ port@0 { reg = <0>; adv7511_in: endpoint { - remote-endpoint = <&du_out_lvds0>; + remote-endpoint = <&lvds0_out>; }; }; @@ -467,10 +467,8 @@ status = "okay"; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 726>, <&cpg CPG_MOD 725>, <&x13_clk>, <&x2_clk>; - clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1", - "dclkin.0", "dclkin.1"; + clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1"; ports { port@0 { @@ -478,12 +476,26 @@ remote-endpoint = <&adv7123_in>; }; }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { port@1 { endpoint { remote-endpoint = <&adv7511_in>; }; }; - port@2 { + }; +}; + +&lvds1 { + status = "okay"; + + ports { + port@1 { lvds_connector: endpoint { }; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index e4367cecad18a..05a0fc23ac88f 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1627,18 +1627,13 @@ du: display@feb00000 { compatible = "renesas,du-r8a7790"; - reg = <0 0xfeb00000 0 0x70000>, - <0 0xfeb90000 0 0x1c>, - <0 0xfeb94000 0 0x1c>; - reg-names = "du", "lvds.0", "lvds.1"; + reg = <0 0xfeb00000 0 0x70000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 722>, <&cpg CPG_MOD 726>, - <&cpg CPG_MOD 725>; - clock-names = "du.0", "du.1", "du.2", "lvds.0", - "lvds.1"; + <&cpg CPG_MOD 722>; + clock-names = "du.0", "du.1", "du.2"; status = "disabled"; ports { @@ -1653,11 +1648,65 @@ port@1 { reg = <1>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; }; }; port@2 { reg = <2>; du_out_lvds1: endpoint { + remote-endpoint = <&lvds1_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a7790-lvds"; + reg = <0 0xfeb90000 0 0x1c>; + clocks = <&cpg CPG_MOD 726>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 726>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + + lvds1: lvds@feb94000 { + compatible = "renesas,r8a7790-lvds"; + reg = <0 0xfeb94000 0 0x1c>; + clocks = <&cpg CPG_MOD 725>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 725>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds1_in: endpoint { + remote-endpoint = <&du_out_lvds1>; + }; + }; + port@1 { + reg = <1>; + lvds1_out: endpoint { }; }; }; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index f40321a1c917e..9d7213a0b8b82 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -468,10 +468,9 @@ pinctrl-names = "default"; status = "okay"; - clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x13_clk>, <&x2_clk>; - clock-names = "du.0", "du.1", "lvds.0", - "dclkin.0", "dclkin.1"; + clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; ports { port@0 { @@ -479,6 +478,13 @@ remote-endpoint = <&adv7511_in>; }; }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { port@1 { lvds_connector: endpoint { }; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index c14e6fe9e4f69..ae9ed9ff53efd 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -441,10 +441,9 @@ pinctrl-names = "default"; status = "okay"; - clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x3_clk>, <&x16_clk>; - clock-names = "du.0", "du.1", "lvds.0", - "dclkin.0", "dclkin.1"; + clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; ports { port@0 { @@ -455,6 +454,17 @@ }; }; +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds_connector: endpoint { + }; + }; + }; +}; + &rcar_sound { pinctrl-0 = <&ssi_pins &audio_clk_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index f11dab71b03a9..506b208854133 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1633,15 +1633,12 @@ du: display@feb00000 { compatible = "renesas,du-r8a7791"; - reg = <0 0xfeb00000 0 0x40000>, - <0 0xfeb90000 0 0x1c>; - reg-names = "du", "lvds.0"; + reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 726>; - clock-names = "du.0", "du.1", "lvds.0"; + <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; status = "disabled"; ports { @@ -1656,6 +1653,33 @@ port@1 { reg = <1>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a7791-lvds"; + reg = <0 0xfeb90000 0 0x1c>; + clocks = <&cpg CPG_MOD 726>; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 726>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { }; }; }; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 9ed6961f2d9a2..96e117d8b2cce 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -447,10 +447,9 @@ pinctrl-names = "default"; status = "okay"; - clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>, + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x13_clk>, <&x2_clk>; - clock-names = "du.0", "du.1", "lvds.0", - "dclkin.0", "dclkin.1"; + clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; ports { port@0 { @@ -458,6 +457,11 @@ remote-endpoint = <&adv7511_in>; }; }; + }; +}; + +&lvds0 { + ports { port@1 { lvds_connector: endpoint { }; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index f9c5a557107d9..4f526030dc7cb 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -1292,15 +1292,12 @@ du: display@feb00000 { compatible = "renesas,du-r8a7793"; - reg = <0 0xfeb00000 0 0x40000>, - <0 0xfeb90000 0 0x1c>; - reg-names = "du", "lvds.0"; + reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 726>; - clock-names = "du.0", "du.1", "lvds.0"; + <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; status = "disabled"; ports { @@ -1315,6 +1312,34 @@ port@1 { reg = <1>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a7793-lvds"; + reg = <0 0xfeb90000 0 0x1c>; + clocks = <&cpg CPG_MOD 726>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + resets = <&cpg 726>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { }; }; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts index 2459d133f1bee..f50b19447de69 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -161,7 +161,7 @@ }; at24@50 { - compatible = "at24,24c01"; + compatible = "atmel,24c01"; pagesize = <8>; reg = <0x50>; }; @@ -213,7 +213,7 @@ #size-cells = <0>; reg = <6>; eeprom@51 { - compatible = "at,24c01"; + compatible = "atmel,24c01"; pagesize = <8>; reg = <0x51>; }; @@ -224,7 +224,7 @@ #size-cells = <0>; reg = <7>; eeprom@51 { - compatible = "at,24c01"; + compatible = "atmel,24c01"; pagesize = <8>; reg = <0x51>; }; diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index c0743305f31b6..eb96ac3e6c1d4 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -12,6 +12,8 @@ #size-cells = <1>; compatible = "st,stm32mp157-pinctrl"; ranges = <0 0x50002000 0xa400>; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; pins-are-numbered; gpioa: gpio@50002000 { @@ -166,6 +168,8 @@ compatible = "st,stm32mp157-z-pinctrl"; ranges = <0 0x54004000 0x400>; pins-are-numbered; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; status = "disabled"; gpioz: gpio@54004000 { diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index 9e17e42b02b23..4fa0df853c8a9 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -183,6 +183,13 @@ status = "disabled"; }; + exti: interrupt-controller@5000d000 { + compatible = "st,stm32mp1-exti", "syscon"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000d000 0x400>; + }; + usart1: serial@5c000000 { compatible = "st,stm32h7-uart"; reg = <0x5c000000 0x400>; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 77e8436beed46..3a1c6b45c9a1c 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -76,7 +76,7 @@ allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>, <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, - <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, + <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>, <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; @@ -88,7 +88,7 @@ allwinner,pipeline = "de_fe0-de_be0-lcd0"; clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>, - <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_TCON0_CH0>, + <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH0>, <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; }; @@ -99,7 +99,7 @@ allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0"; clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, - <&ccu CLK_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, + <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>, <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; status = "disabled"; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts index 3328fe583c9ba..232f124ce62c0 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts @@ -117,6 +117,7 @@ phy-handle = <&int_mii_phy>; phy-mode = "mii"; allwinner,leds-active-low; + status = "okay"; }; &hdmi { diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts index d1311098ea459..ad173605b1b89 100644 --- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts +++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts @@ -51,7 +51,7 @@ leds { /* The LEDs use PG0~2 pins, which conflict with MMC1 */ - status = "disbaled"; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 0a7136462a1a6..983dd5c147945 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -741,7 +741,7 @@ phy_type = "ulpi"; clocks = <&tegra_car TEGRA20_CLK_USB2>, <&tegra_car TEGRA20_CLK_PLL_U>, - <&tegra_car TEGRA20_CLK_PLL_P_OUT4>; + <&tegra_car TEGRA20_CLK_CDEV2>; clock-names = "reg", "pll_u", "ulpi-link"; resets = <&tegra_car 58>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S index 99207c45ec10f..f82cd8cf5a093 100644 --- a/arch/arm/crypto/sha1-armv4-large.S +++ b/arch/arm/crypto/sha1-armv4-large.S @@ -1,4 +1,14 @@ #define __ARM_ARCH__ __LINUX_ARM_ARCH__ +@ SPDX-License-Identifier: GPL-2.0 + +@ This code is taken from the OpenSSL project but the author (Andy Polyakov) +@ has relicensed it under the GPLv2. Therefore this program is free software; +@ you can redistribute it and/or modify it under the terms of the GNU General +@ Public License version 2 as published by the Free Software Foundation. +@ +@ The original headers, including the original license headers, are +@ included below for completeness. + @ ==================================================================== @ Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL @ project. The module is, however, dual licensed under OpenSSL and diff --git a/arch/arm/crypto/sha256-armv4.pl b/arch/arm/crypto/sha256-armv4.pl index fac0533ea633e..b9ec44060ed31 100644 --- a/arch/arm/crypto/sha256-armv4.pl +++ b/arch/arm/crypto/sha256-armv4.pl @@ -1,12 +1,19 @@ #!/usr/bin/env perl +# SPDX-License-Identifier: GPL-2.0 + +# This code is taken from the OpenSSL project but the author (Andy Polyakov) +# has relicensed it under the GPLv2. Therefore this program is free software; +# you can redistribute it and/or modify it under the terms of the GNU General +# Public License version 2 as published by the Free Software Foundation. +# +# The original headers, including the original license headers, are +# included below for completeness. # ==================================================================== # Written by Andy Polyakov <appro@openssl.org> for the OpenSSL # project. The module is, however, dual licensed under OpenSSL and # CRYPTOGAMS licenses depending on where you obtain it. For further # details see http://www.openssl.org/~appro/cryptogams/. -# -# Permission to use under GPL terms is granted. # ==================================================================== # SHA256 block procedure for ARMv4. May 2007. diff --git a/arch/arm/crypto/sha256-core.S_shipped b/arch/arm/crypto/sha256-core.S_shipped index 555a1a8eec90a..3b58300d611cf 100644 --- a/arch/arm/crypto/sha256-core.S_shipped +++ b/arch/arm/crypto/sha256-core.S_shipped @@ -1,11 +1,18 @@ +@ SPDX-License-Identifier: GPL-2.0 + +@ This code is taken from the OpenSSL project but the author (Andy Polyakov) +@ has relicensed it under the GPLv2. Therefore this program is free software; +@ you can redistribute it and/or modify it under the terms of the GNU General +@ Public License version 2 as published by the Free Software Foundation. +@ +@ The original headers, including the original license headers, are +@ included below for completeness. @ ==================================================================== @ Written by Andy Polyakov <appro@openssl.org> for the OpenSSL @ project. The module is, however, dual licensed under OpenSSL and @ CRYPTOGAMS licenses depending on where you obtain it. For further @ details see http://www.openssl.org/~appro/cryptogams/. -@ -@ Permission to use under GPL terms is granted. @ ==================================================================== @ SHA256 block procedure for ARMv4. May 2007. diff --git a/arch/arm/crypto/sha512-armv4.pl b/arch/arm/crypto/sha512-armv4.pl index a2b11a8443577..fb5d15048c0b2 100644 --- a/arch/arm/crypto/sha512-armv4.pl +++ b/arch/arm/crypto/sha512-armv4.pl @@ -1,12 +1,19 @@ #!/usr/bin/env perl +# SPDX-License-Identifier: GPL-2.0 + +# This code is taken from the OpenSSL project but the author (Andy Polyakov) +# has relicensed it under the GPLv2. Therefore this program is free software; +# you can redistribute it and/or modify it under the terms of the GNU General +# Public License version 2 as published by the Free Software Foundation. +# +# The original headers, including the original license headers, are +# included below for completeness. # ==================================================================== # Written by Andy Polyakov <appro@openssl.org> for the OpenSSL # project. The module is, however, dual licensed under OpenSSL and # CRYPTOGAMS licenses depending on where you obtain it. For further # details see http://www.openssl.org/~appro/cryptogams/. -# -# Permission to use under GPL terms is granted. # ==================================================================== # SHA512 block procedure for ARMv4. September 2007. diff --git a/arch/arm/crypto/sha512-core.S_shipped b/arch/arm/crypto/sha512-core.S_shipped index 3694c4d4ca2bc..b1c334a49cdaa 100644 --- a/arch/arm/crypto/sha512-core.S_shipped +++ b/arch/arm/crypto/sha512-core.S_shipped @@ -1,11 +1,18 @@ +@ SPDX-License-Identifier: GPL-2.0 + +@ This code is taken from the OpenSSL project but the author (Andy Polyakov) +@ has relicensed it under the GPLv2. Therefore this program is free software; +@ you can redistribute it and/or modify it under the terms of the GNU General +@ Public License version 2 as published by the Free Software Foundation. +@ +@ The original headers, including the original license headers, are +@ included below for completeness. @ ==================================================================== @ Written by Andy Polyakov <appro@openssl.org> for the OpenSSL @ project. The module is, however, dual licensed under OpenSSL and @ CRYPTOGAMS licenses depending on where you obtain it. For further @ details see http://www.openssl.org/~appro/cryptogams/. -@ -@ Permission to use under GPL terms is granted. @ ==================================================================== @ SHA512 block procedure for ARMv4. September 2007. diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 873e3c1892796..1d66db9c9db53 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -1,3 +1,4 @@ +generic-y += compat.h generic-y += current.h generic-y += early_ioremap.h generic-y += emergency-restart.h diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index bc8d4bbd82e27..0cd4dccbae788 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -447,6 +447,14 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) .size \name , . - \name .endm + .macro csdb +#ifdef CONFIG_THUMB2_KERNEL + .inst.w 0xf3af8014 +#else + .inst 0xe320f014 +#endif + .endm + .macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req #ifndef CONFIG_CPU_USE_DOMAINS adds \tmp, \addr, #\size - 1 @@ -536,4 +544,14 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) #endif .endm +#ifdef CONFIG_KPROBES +#define _ASM_NOKPROBE(entry) \ + .pushsection "_kprobe_blacklist", "aw" ; \ + .balign 4 ; \ + .long entry; \ + .popsection +#else +#define _ASM_NOKPROBE(entry) +#endif + #endif /* __ASM_ASSEMBLER_H__ */ diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h index 40f5c410fd8c3..69772e742a0ac 100644 --- a/arch/arm/include/asm/barrier.h +++ b/arch/arm/include/asm/barrier.h @@ -17,6 +17,12 @@ #define isb(option) __asm__ __volatile__ ("isb " #option : : : "memory") #define dsb(option) __asm__ __volatile__ ("dsb " #option : : : "memory") #define dmb(option) __asm__ __volatile__ ("dmb " #option : : : "memory") +#ifdef CONFIG_THUMB2_KERNEL +#define CSDB ".inst.w 0xf3af8014" +#else +#define CSDB ".inst 0xe320f014" +#endif +#define csdb() __asm__ __volatile__(CSDB : : : "memory") #elif defined(CONFIG_CPU_XSC3) || __LINUX_ARM_ARCH__ == 6 #define isb(x) __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \ : : "r" (0) : "memory") @@ -37,6 +43,13 @@ #define dmb(x) __asm__ __volatile__ ("" : : : "memory") #endif +#ifndef CSDB +#define CSDB +#endif +#ifndef csdb +#define csdb() +#endif + #ifdef CONFIG_ARM_HEAVY_MB extern void (*soc_mb)(void); extern void arm_heavy_mb(void); @@ -63,6 +76,25 @@ extern void arm_heavy_mb(void); #define __smp_rmb() __smp_mb() #define __smp_wmb() dmb(ishst) +#ifdef CONFIG_CPU_SPECTRE +static inline unsigned long array_index_mask_nospec(unsigned long idx, + unsigned long sz) +{ + unsigned long mask; + + asm volatile( + "cmp %1, %2\n" + " sbc %0, %1, %1\n" + CSDB + : "=r" (mask) + : "r" (idx), "Ir" (sz) + : "cc"); + + return mask; +} +#define array_index_mask_nospec array_index_mask_nospec +#endif + #include <asm-generic/barrier.h> #endif /* !__ASSEMBLY__ */ diff --git a/arch/arm/include/asm/bugs.h b/arch/arm/include/asm/bugs.h index a97f1ea708d19..73a99c72a930a 100644 --- a/arch/arm/include/asm/bugs.h +++ b/arch/arm/include/asm/bugs.h @@ -10,12 +10,14 @@ #ifndef __ASM_BUGS_H #define __ASM_BUGS_H -#ifdef CONFIG_MMU extern void check_writebuffer_bugs(void); -#define check_bugs() check_writebuffer_bugs() +#ifdef CONFIG_MMU +extern void check_bugs(void); +extern void check_other_bugs(void); #else #define check_bugs() do { } while (0) +#define check_other_bugs() do { } while (0) #endif #endif diff --git a/arch/arm/include/asm/cp15.h b/arch/arm/include/asm/cp15.h index 4c9fa72b59f57..07e27f212dc75 100644 --- a/arch/arm/include/asm/cp15.h +++ b/arch/arm/include/asm/cp15.h @@ -65,6 +65,9 @@ #define __write_sysreg(v, r, w, c, t) asm volatile(w " " c : : "r" ((t)(v))) #define write_sysreg(v, ...) __write_sysreg(v, __VA_ARGS__) +#define BPIALL __ACCESS_CP15(c7, 0, c5, 6) +#define ICIALLU __ACCESS_CP15(c7, 0, c5, 0) + extern unsigned long cr_alignment; /* defined in entry-armv.S */ static inline unsigned long get_cr(void) diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index cb546425da8a0..26021980504db 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -77,8 +77,16 @@ #define ARM_CPU_PART_CORTEX_A12 0x4100c0d0 #define ARM_CPU_PART_CORTEX_A17 0x4100c0e0 #define ARM_CPU_PART_CORTEX_A15 0x4100c0f0 +#define ARM_CPU_PART_CORTEX_A53 0x4100d030 +#define ARM_CPU_PART_CORTEX_A57 0x4100d070 +#define ARM_CPU_PART_CORTEX_A72 0x4100d080 +#define ARM_CPU_PART_CORTEX_A73 0x4100d090 +#define ARM_CPU_PART_CORTEX_A75 0x4100d0a0 #define ARM_CPU_PART_MASK 0xff00fff0 +/* Broadcom cores */ +#define ARM_CPU_PART_BRAHMA_B15 0x420000f0 + /* DEC implemented cores */ #define ARM_CPU_PART_SA1100 0x4400a110 diff --git a/arch/arm/include/asm/kgdb.h b/arch/arm/include/asm/kgdb.h index 3b73fdcf3627a..8de1100d10674 100644 --- a/arch/arm/include/asm/kgdb.h +++ b/arch/arm/include/asm/kgdb.h @@ -77,7 +77,7 @@ extern int kgdb_fault_expected; #define KGDB_MAX_NO_CPUS 1 #define BUFMAX 400 -#define NUMREGBYTES (DBG_MAX_REG_NUM << 2) +#define NUMREGBYTES (GDB_MAX_REGS << 2) #define NUMCRITREGBYTES (32 << 2) #define _R0 0 diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h index 5a953ecb0d788..231e87ad45d56 100644 --- a/arch/arm/include/asm/kvm_asm.h +++ b/arch/arm/include/asm/kvm_asm.h @@ -61,8 +61,6 @@ struct kvm_vcpu; extern char __kvm_hyp_init[]; extern char __kvm_hyp_init_end[]; -extern char __kvm_hyp_vector[]; - extern void __kvm_flush_vm_context(void); extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); extern void __kvm_tlb_flush_vmid(struct kvm *kvm); diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index c7c28c885a194..343fc9e6f78d2 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -21,6 +21,7 @@ #include <linux/types.h> #include <linux/kvm_types.h> +#include <asm/cputype.h> #include <asm/kvm.h> #include <asm/kvm_asm.h> #include <asm/kvm_mmio.h> @@ -311,8 +312,17 @@ static inline void kvm_arm_vhe_guest_exit(void) {} static inline bool kvm_arm_harden_branch_predictor(void) { - /* No way to detect it yet, pretend it is not there. */ - return false; + switch(read_cpuid_part()) { +#ifdef CONFIG_HARDEN_BRANCH_PREDICTOR + case ARM_CPU_PART_BRAHMA_B15: + case ARM_CPU_PART_CORTEX_A12: + case ARM_CPU_PART_CORTEX_A15: + case ARM_CPU_PART_CORTEX_A17: + return true; +#endif + default: + return false; + } } static inline void kvm_vcpu_load_sysregs(struct kvm_vcpu *vcpu) {} diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index 707a1f06dc5d5..c94d291fd1a83 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -309,9 +309,46 @@ static inline unsigned int kvm_get_vmid_bits(void) return 8; } +/* + * We are not in the kvm->srcu critical section most of the time, so we take + * the SRCU read lock here. Since we copy the data from the user page, we + * can immediately drop the lock again. + */ +static inline int kvm_read_guest_lock(struct kvm *kvm, + gpa_t gpa, void *data, unsigned long len) +{ + int srcu_idx = srcu_read_lock(&kvm->srcu); + int ret = kvm_read_guest(kvm, gpa, data, len); + + srcu_read_unlock(&kvm->srcu, srcu_idx); + + return ret; +} + static inline void *kvm_get_hyp_vector(void) { - return kvm_ksym_ref(__kvm_hyp_vector); + switch(read_cpuid_part()) { +#ifdef CONFIG_HARDEN_BRANCH_PREDICTOR + case ARM_CPU_PART_CORTEX_A12: + case ARM_CPU_PART_CORTEX_A17: + { + extern char __kvm_hyp_vector_bp_inv[]; + return kvm_ksym_ref(__kvm_hyp_vector_bp_inv); + } + + case ARM_CPU_PART_BRAHMA_B15: + case ARM_CPU_PART_CORTEX_A15: + { + extern char __kvm_hyp_vector_ic_inv[]; + return kvm_ksym_ref(__kvm_hyp_vector_ic_inv); + } +#endif + default: + { + extern char __kvm_hyp_vector[]; + return kvm_ksym_ref(__kvm_hyp_vector); + } + } } static inline int kvm_map_vectors(void) diff --git a/arch/arm/include/asm/mpu.h b/arch/arm/include/asm/mpu.h index 6d1491c8ee222..5e088c83d3d8e 100644 --- a/arch/arm/include/asm/mpu.h +++ b/arch/arm/include/asm/mpu.h @@ -12,60 +12,101 @@ /* ID_MMFR0 data relevant to MPU */ #define MMFR0_PMSA (0xF << 4) #define MMFR0_PMSAv7 (3 << 4) +#define MMFR0_PMSAv8 (4 << 4) /* MPU D/I Size Register fields */ -#define MPU_RSR_SZ 1 -#define MPU_RSR_EN 0 -#define MPU_RSR_SD 8 +#define PMSAv7_RSR_SZ 1 +#define PMSAv7_RSR_EN 0 +#define PMSAv7_RSR_SD 8 /* Number of subregions (SD) */ -#define MPU_NR_SUBREGS 8 -#define MPU_MIN_SUBREG_SIZE 256 +#define PMSAv7_NR_SUBREGS 8 +#define PMSAv7_MIN_SUBREG_SIZE 256 /* The D/I RSR value for an enabled region spanning the whole of memory */ -#define MPU_RSR_ALL_MEM 63 +#define PMSAv7_RSR_ALL_MEM 63 /* Individual bits in the DR/IR ACR */ -#define MPU_ACR_XN (1 << 12) -#define MPU_ACR_SHARED (1 << 2) +#define PMSAv7_ACR_XN (1 << 12) +#define PMSAv7_ACR_SHARED (1 << 2) /* C, B and TEX[2:0] bits only have semantic meanings when grouped */ -#define MPU_RGN_CACHEABLE 0xB -#define MPU_RGN_SHARED_CACHEABLE (MPU_RGN_CACHEABLE | MPU_ACR_SHARED) -#define MPU_RGN_STRONGLY_ORDERED 0 +#define PMSAv7_RGN_CACHEABLE 0xB +#define PMSAv7_RGN_SHARED_CACHEABLE (PMSAv7_RGN_CACHEABLE | PMSAv7_ACR_SHARED) +#define PMSAv7_RGN_STRONGLY_ORDERED 0 /* Main region should only be shared for SMP */ #ifdef CONFIG_SMP -#define MPU_RGN_NORMAL (MPU_RGN_CACHEABLE | MPU_ACR_SHARED) +#define PMSAv7_RGN_NORMAL (PMSAv7_RGN_CACHEABLE | PMSAv7_ACR_SHARED) #else -#define MPU_RGN_NORMAL MPU_RGN_CACHEABLE +#define PMSAv7_RGN_NORMAL PMSAv7_RGN_CACHEABLE #endif /* Access permission bits of ACR (only define those that we use)*/ -#define MPU_AP_PL1RO_PL0NA (0x5 << 8) -#define MPU_AP_PL1RW_PL0RW (0x3 << 8) -#define MPU_AP_PL1RW_PL0R0 (0x2 << 8) -#define MPU_AP_PL1RW_PL0NA (0x1 << 8) +#define PMSAv7_AP_PL1RO_PL0NA (0x5 << 8) +#define PMSAv7_AP_PL1RW_PL0RW (0x3 << 8) +#define PMSAv7_AP_PL1RW_PL0R0 (0x2 << 8) +#define PMSAv7_AP_PL1RW_PL0NA (0x1 << 8) + +#define PMSAv8_BAR_XN 1 + +#define PMSAv8_LAR_EN 1 +#define PMSAv8_LAR_IDX(n) (((n) & 0x7) << 1) + + +#define PMSAv8_AP_PL1RW_PL0NA (0 << 1) +#define PMSAv8_AP_PL1RW_PL0RW (1 << 1) +#define PMSAv8_AP_PL1RO_PL0RO (3 << 1) + +#ifdef CONFIG_SMP +#define PMSAv8_RGN_SHARED (3 << 3) // inner sharable +#else +#define PMSAv8_RGN_SHARED (0 << 3) +#endif + +#define PMSAv8_RGN_DEVICE_nGnRnE 0 +#define PMSAv8_RGN_NORMAL 1 + +#define PMSAv8_MAIR(attr, mt) ((attr) << ((mt) * 8)) + +#ifdef CONFIG_CPU_V7M +#define PMSAv8_MINALIGN 32 +#else +#define PMSAv8_MINALIGN 64 +#endif /* For minimal static MPU region configurations */ -#define MPU_PROBE_REGION 0 -#define MPU_BG_REGION 1 -#define MPU_RAM_REGION 2 -#define MPU_ROM_REGION 3 +#define PMSAv7_PROBE_REGION 0 +#define PMSAv7_BG_REGION 1 +#define PMSAv7_RAM_REGION 2 +#define PMSAv7_ROM_REGION 3 + +/* Fixed for PMSAv8 only */ +#define PMSAv8_XIP_REGION 0 +#define PMSAv8_KERNEL_REGION 1 /* Maximum number of regions Linux is interested in */ -#define MPU_MAX_REGIONS 16 +#define MPU_MAX_REGIONS 16 -#define MPU_DATA_SIDE 0 -#define MPU_INSTR_SIDE 1 +#define PMSAv7_DATA_SIDE 0 +#define PMSAv7_INSTR_SIDE 1 #ifndef __ASSEMBLY__ struct mpu_rgn { /* Assume same attributes for d/i-side */ - u32 drbar; - u32 drsr; - u32 dracr; + union { + u32 drbar; /* PMSAv7 */ + u32 prbar; /* PMSAv8 */ + }; + union { + u32 drsr; /* PMSAv7 */ + u32 prlar; /* PMSAv8 */ + }; + union { + u32 dracr; /* PMSAv7 */ + u32 unused; /* not used in PMSAv8 */ + }; }; struct mpu_rgn_info { @@ -75,16 +116,17 @@ struct mpu_rgn_info { extern struct mpu_rgn_info mpu_rgn_info; #ifdef CONFIG_ARM_MPU +extern void __init pmsav7_adjust_lowmem_bounds(void); +extern void __init pmsav8_adjust_lowmem_bounds(void); -extern void __init adjust_lowmem_bounds_mpu(void); -extern void __init mpu_setup(void); - +extern void __init pmsav7_setup(void); +extern void __init pmsav8_setup(void); #else - -static inline void adjust_lowmem_bounds_mpu(void) {} -static inline void mpu_setup(void) {} - -#endif /* !CONFIG_ARM_MPU */ +static inline void pmsav7_adjust_lowmem_bounds(void) {}; +static inline void pmsav8_adjust_lowmem_bounds(void) {}; +static inline void pmsav7_setup(void) {}; +static inline void pmsav8_setup(void) {}; +#endif #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index 1f0de808d111e..0abd389cf0eca 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -19,13 +19,6 @@ static inline int pci_proc_domain(struct pci_bus *bus) } #endif /* CONFIG_PCI_DOMAINS */ -/* - * The PCI address space does equal the physical memory address space. - * The networking and block device layers use this boolean for bounce - * buffer decisions. - */ -#define PCI_DMA_BUS_IS_PHYS (1) - #define HAVE_PCI_MMAP #define ARCH_GENERIC_PCI_MMAP_RESOURCE diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h index f2e1af45bd6fa..e25f4392e1b28 100644 --- a/arch/arm/include/asm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -37,6 +37,10 @@ extern struct processor { */ void (*_proc_init)(void); /* + * Check for processor bugs + */ + void (*check_bugs)(void); + /* * Disable any processor specifics */ void (*_proc_fin)(void); diff --git a/arch/arm/include/asm/system_misc.h b/arch/arm/include/asm/system_misc.h index 78f6db114faf6..8e76db83c4987 100644 --- a/arch/arm/include/asm/system_misc.h +++ b/arch/arm/include/asm/system_misc.h @@ -8,6 +8,7 @@ #include <linux/linkage.h> #include <linux/irqflags.h> #include <linux/reboot.h> +#include <linux/percpu.h> extern void cpu_init(void); @@ -15,6 +16,20 @@ void soft_restart(unsigned long); extern void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd); extern void (*arm_pm_idle)(void); +#ifdef CONFIG_HARDEN_BRANCH_PREDICTOR +typedef void (*harden_branch_predictor_fn_t)(void); +DECLARE_PER_CPU(harden_branch_predictor_fn_t, harden_branch_predictor_fn); +static inline void harden_branch_predictor(void) +{ + harden_branch_predictor_fn_t fn = per_cpu(harden_branch_predictor_fn, + smp_processor_id()); + if (fn) + fn(); +} +#else +#define harden_branch_predictor() do { } while (0) +#endif + #define UDBG_UNDEFINED (1 << 0) #define UDBG_SYSCALL (1 << 1) #define UDBG_BADABORT (1 << 2) diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 0bf2347495f13..3d614e90c19f3 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -152,7 +152,7 @@ extern int __get_user_64t_4(void *); #define __get_user_check(x, p) \ ({ \ unsigned long __limit = current_thread_info()->addr_limit - 1; \ - register const typeof(*(p)) __user *__p asm("r0") = (p);\ + register typeof(*(p)) __user *__p asm("r0") = (p); \ register typeof(x) __r2 asm("r2"); \ register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ diff --git a/arch/arm/include/asm/v7m.h b/arch/arm/include/asm/v7m.h index 634e77107425d..187ccf6496ad6 100644 --- a/arch/arm/include/asm/v7m.h +++ b/arch/arm/include/asm/v7m.h @@ -64,9 +64,17 @@ #define MPU_CTRL_ENABLE 1 #define MPU_CTRL_PRIVDEFENA (1 << 2) -#define MPU_RNR 0x98 -#define MPU_RBAR 0x9c -#define MPU_RASR 0xa0 +#define PMSAv7_RNR 0x98 +#define PMSAv7_RBAR 0x9c +#define PMSAv7_RASR 0xa0 + +#define PMSAv8_RNR 0x98 +#define PMSAv8_RBAR 0x9c +#define PMSAv8_RLAR 0xa0 +#define PMSAv8_RBAR_A(n) (PMSAv8_RBAR + 8*(n)) +#define PMSAv8_RLAR_A(n) (PMSAv8_RLAR + 8*(n)) +#define PMSAv8_MAIR0 0xc0 +#define PMSAv8_MAIR1 0xc4 /* Cache opeartions */ #define V7M_SCB_ICIALLU 0x250 /* I-cache invalidate all to PoU */ diff --git a/arch/arm/include/uapi/asm/siginfo.h b/arch/arm/include/uapi/asm/siginfo.h deleted file mode 100644 index d0513880be210..0000000000000 --- a/arch/arm/include/uapi/asm/siginfo.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASM_SIGINFO_H -#define __ASM_SIGINFO_H - -#include <asm-generic/siginfo.h> - -/* - * SIGFPE si_codes - */ -#ifdef __KERNEL__ -#define FPE_FIXME 0 /* Broken dup of SI_USER */ -#endif /* __KERNEL__ */ - -#endif diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index b59ac4bf82b8a..8cad59465af39 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -31,6 +31,7 @@ else obj-y += entry-armv.o endif +obj-$(CONFIG_MMU) += bugs.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ISA_DMA_API) += dma.o obj-$(CONFIG_FIQ) += fiq.o fiqasm.o diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index f369ece999587..27c5381518d88 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -194,9 +194,11 @@ int main(void) DEFINE(MPU_RNG_INFO_USED, offsetof(struct mpu_rgn_info, used)); DEFINE(MPU_RNG_SIZE, sizeof(struct mpu_rgn)); - DEFINE(MPU_RGN_DRBAR, offsetof(struct mpu_rgn, drbar)); - DEFINE(MPU_RGN_DRSR, offsetof(struct mpu_rgn, drsr)); - DEFINE(MPU_RGN_DRACR, offsetof(struct mpu_rgn, dracr)); + DEFINE(MPU_RGN_DRBAR, offsetof(struct mpu_rgn, drbar)); + DEFINE(MPU_RGN_DRSR, offsetof(struct mpu_rgn, drsr)); + DEFINE(MPU_RGN_DRACR, offsetof(struct mpu_rgn, dracr)); + DEFINE(MPU_RGN_PRBAR, offsetof(struct mpu_rgn, prbar)); + DEFINE(MPU_RGN_PRLAR, offsetof(struct mpu_rgn, prlar)); #endif return 0; } diff --git a/arch/arm/kernel/bugs.c b/arch/arm/kernel/bugs.c new file mode 100644 index 0000000000000..7be5113101915 --- /dev/null +++ b/arch/arm/kernel/bugs.c @@ -0,0 +1,18 @@ +// SPDX-Identifier: GPL-2.0 +#include <linux/init.h> +#include <asm/bugs.h> +#include <asm/proc-fns.h> + +void check_other_bugs(void) +{ +#ifdef MULTI_CPU + if (processor.check_bugs) + processor.check_bugs(); +#endif +} + +void __init check_bugs(void) +{ + check_writebuffer_bugs(); + check_other_bugs(); +} diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c index e651c4d0a0d9c..6739d37c2bc51 100644 --- a/arch/arm/kernel/dma.c +++ b/arch/arm/kernel/dma.c @@ -276,21 +276,9 @@ static int proc_dma_show(struct seq_file *m, void *v) return 0; } -static int proc_dma_open(struct inode *inode, struct file *file) -{ - return single_open(file, proc_dma_show, NULL); -} - -static const struct file_operations proc_dma_operations = { - .open = proc_dma_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - static int __init proc_dma_init(void) { - proc_create("dma", 0, NULL, &proc_dma_operations); + proc_create_single("dma", 0, NULL, proc_dma_show); return 0; } diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 3c4f88701f224..20df608bf343d 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -242,9 +242,7 @@ local_restart: tst r10, #_TIF_SYSCALL_WORK @ are we tracing syscalls? bne __sys_trace - cmp scno, #NR_syscalls @ check upper syscall limit - badr lr, ret_fast_syscall @ return address - ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine + invoke_syscall tbl, scno, r10, ret_fast_syscall add r1, sp, #S_OFF 2: cmp scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE) @@ -278,14 +276,8 @@ __sys_trace: mov r1, scno add r0, sp, #S_OFF bl syscall_trace_enter - - badr lr, __sys_trace_return @ return address - mov scno, r0 @ syscall number (possibly new) - add r1, sp, #S_R0 + S_OFF @ pointer to regs - cmp scno, #NR_syscalls @ check upper syscall limit - ldmccia r1, {r0 - r6} @ have to reload r0 - r6 - stmccia sp, {r4, r5} @ and update the stack args - ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine + mov scno, r0 + invoke_syscall tbl, scno, r10, __sys_trace_return, reload=1 cmp scno, #-1 @ skip the syscall? bne 2b add sp, sp, #S_OFF @ restore stack @@ -363,6 +355,10 @@ sys_syscall: bic scno, r0, #__NR_OABI_SYSCALL_BASE cmp scno, #__NR_syscall - __NR_SYSCALL_BASE cmpne scno, #NR_syscalls @ check range +#ifdef CONFIG_CPU_SPECTRE + movhs scno, #0 + csdb +#endif stmloia sp, {r5, r6} @ shuffle args movlo r0, r1 movlo r1, r2 diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 0f07579af472c..773424843d6ef 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -378,6 +378,31 @@ #endif .endm + .macro invoke_syscall, table, nr, tmp, ret, reload=0 +#ifdef CONFIG_CPU_SPECTRE + mov \tmp, \nr + cmp \tmp, #NR_syscalls @ check upper syscall limit + movcs \tmp, #0 + csdb + badr lr, \ret @ return address + .if \reload + add r1, sp, #S_R0 + S_OFF @ pointer to regs + ldmccia r1, {r0 - r6} @ reload r0-r6 + stmccia sp, {r4, r5} @ update stack arguments + .endif + ldrcc pc, [\table, \tmp, lsl #2] @ call sys_* routine +#else + cmp \nr, #NR_syscalls @ check upper syscall limit + badr lr, \ret @ return address + .if \reload + add r1, sp, #S_R0 + S_OFF @ pointer to regs + ldmccia r1, {r0 - r6} @ reload r0-r6 + stmccia sp, {r4, r5} @ update stack arguments + .endif + ldrcc pc, [\table, \nr, lsl #2] @ call sys_* routine +#endif + .endm + /* * These are the registers used in the syscall handler, and allow us to * have in theory up to 7 arguments to a function - r0 to r6. diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 2e38f85b757af..dd546d65a3830 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -68,14 +68,6 @@ ENTRY(stext) beq __error_p @ yes, error 'p' #ifdef CONFIG_ARM_MPU - /* Calculate the size of a region covering just the kernel */ - ldr r5, =PLAT_PHYS_OFFSET @ Region start: PHYS_OFFSET - ldr r6, =(_end) @ Cover whole kernel - sub r6, r6, r5 @ Minimum size of region to map - clz r6, r6 @ Region size must be 2^N... - rsb r6, r6, #31 @ ...so round up region size - lsl r6, r6, #MPU_RSR_SZ @ Put size in right field - orr r6, r6, #(1 << MPU_RSR_EN) @ Set region enabled bit bl __setup_mpu #endif @@ -83,8 +75,8 @@ ENTRY(stext) ldr r12, [r10, #PROCINFO_INITFUNC] add r12, r12, r10 ret r12 -1: bl __after_proc_init - b __mmap_switched +1: ldr lr, =__mmap_switched + b __after_proc_init ENDPROC(stext) #ifdef CONFIG_SMP @@ -110,8 +102,6 @@ ENTRY(secondary_startup) ldr r7, __secondary_data #ifdef CONFIG_ARM_MPU - /* Use MPU region info supplied by __cpu_up */ - ldr r6, [r7] @ get secondary_data.mpu_rgn_info bl __secondary_setup_mpu @ Initialize the MPU #endif @@ -133,12 +123,45 @@ __secondary_data: /* * Set the Control Register and Read the process ID. */ + .text __after_proc_init: +#ifdef CONFIG_ARM_MPU +M_CLASS(movw r12, #:lower16:BASEADDR_V7M_SCB) +M_CLASS(movt r12, #:upper16:BASEADDR_V7M_SCB) +M_CLASS(ldr r3, [r12, 0x50]) +AR_CLASS(mrc p15, 0, r3, c0, c1, 4) @ Read ID_MMFR0 + and r3, r3, #(MMFR0_PMSA) @ PMSA field + teq r3, #(MMFR0_PMSAv7) @ PMSA v7 + beq 1f + teq r3, #(MMFR0_PMSAv8) @ PMSA v8 + /* + * Memory region attributes for PMSAv8: + * + * n = AttrIndx[2:0] + * n MAIR + * DEVICE_nGnRnE 000 00000000 + * NORMAL 001 11111111 + */ + ldreq r3, =PMSAv8_MAIR(0x00, PMSAv8_RGN_DEVICE_nGnRnE) | \ + PMSAv8_MAIR(0xff, PMSAv8_RGN_NORMAL) +AR_CLASS(mcreq p15, 0, r3, c10, c2, 0) @ MAIR 0 +M_CLASS(streq r3, [r12, #PMSAv8_MAIR0]) + moveq r3, #0 +AR_CLASS(mcreq p15, 0, r3, c10, c2, 1) @ MAIR 1 +M_CLASS(streq r3, [r12, #PMSAv8_MAIR1]) + +1: +#endif #ifdef CONFIG_CPU_CP15 /* * CP15 system control register value returned in r0 from * the CPU init function. */ + +#ifdef CONFIG_ARM_MPU + biceq r0, r0, #CR_BR @ Disable the 'default mem-map' + orreq r0, r0, #CR_M @ Set SCTRL.M (MPU on) +#endif #if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6 orr r0, r0, #CR_A #else @@ -154,7 +177,15 @@ __after_proc_init: bic r0, r0, #CR_I #endif mcr p15, 0, r0, c1, c0, 0 @ write control reg + isb #elif defined (CONFIG_CPU_V7M) +#ifdef CONFIG_ARM_MPU + ldreq r3, [r12, MPU_CTRL] + biceq r3, #MPU_CTRL_PRIVDEFENA + orreq r3, #MPU_CTRL_ENABLE + streq r3, [r12, MPU_CTRL] + isb +#endif /* For V7M systems we want to modify the CCR similarly to the SCTLR */ #ifdef CONFIG_CPU_DCACHE_DISABLE bic r0, r0, #V7M_SCB_CCR_DC @@ -165,9 +196,7 @@ __after_proc_init: #ifdef CONFIG_CPU_ICACHE_DISABLE bic r0, r0, #V7M_SCB_CCR_IC #endif - movw r3, #:lower16:(BASEADDR_V7M_SCB + V7M_SCB_CCR) - movt r3, #:upper16:(BASEADDR_V7M_SCB + V7M_SCB_CCR) - str r0, [r3] + str r0, [r12, V7M_SCB_CCR] #endif /* CONFIG_CPU_CP15 elif CONFIG_CPU_V7M */ ret lr ENDPROC(__after_proc_init) @@ -184,7 +213,7 @@ ENDPROC(__after_proc_init) .endm /* Setup a single MPU region, either D or I side (D-side for unified) */ -.macro setup_region bar, acr, sr, side = MPU_DATA_SIDE, unused +.macro setup_region bar, acr, sr, side = PMSAv7_DATA_SIDE, unused mcr p15, 0, \bar, c6, c1, (0 + \side) @ I/DRBAR mcr p15, 0, \acr, c6, c1, (4 + \side) @ I/DRACR mcr p15, 0, \sr, c6, c1, (2 + \side) @ I/DRSR @@ -192,14 +221,14 @@ ENDPROC(__after_proc_init) #else .macro set_region_nr tmp, rgnr, base mov \tmp, \rgnr - str \tmp, [\base, #MPU_RNR] + str \tmp, [\base, #PMSAv7_RNR] .endm .macro setup_region bar, acr, sr, unused, base lsl \acr, \acr, #16 orr \acr, \acr, \sr - str \bar, [\base, #MPU_RBAR] - str \acr, [\base, #MPU_RASR] + str \bar, [\base, #PMSAv7_RBAR] + str \acr, [\base, #PMSAv7_RASR] .endm #endif @@ -210,8 +239,9 @@ ENDPROC(__after_proc_init) * Region 2: Normal, Shared, cacheable for RAM. From PHYS_OFFSET, size from r6 * Region 3: Normal, shared, inaccessible from PL0 to protect the vectors page * - * r6: Value to be written to DRSR (and IRSR if required) for MPU_RAM_REGION + * r6: Value to be written to DRSR (and IRSR if required) for PMSAv7_RAM_REGION */ + __HEAD ENTRY(__setup_mpu) @@ -223,7 +253,22 @@ AR_CLASS(mrc p15, 0, r0, c0, c1, 4) @ Read ID_MMFR0 M_CLASS(ldr r0, [r12, 0x50]) and r0, r0, #(MMFR0_PMSA) @ PMSA field teq r0, #(MMFR0_PMSAv7) @ PMSA v7 - bxne lr + beq __setup_pmsa_v7 + teq r0, #(MMFR0_PMSAv8) @ PMSA v8 + beq __setup_pmsa_v8 + + ret lr +ENDPROC(__setup_mpu) + +ENTRY(__setup_pmsa_v7) + /* Calculate the size of a region covering just the kernel */ + ldr r5, =PLAT_PHYS_OFFSET @ Region start: PHYS_OFFSET + ldr r6, =(_end) @ Cover whole kernel + sub r6, r6, r5 @ Minimum size of region to map + clz r6, r6 @ Region size must be 2^N... + rsb r6, r6, #31 @ ...so round up region size + lsl r6, r6, #PMSAv7_RSR_SZ @ Put size in right field + orr r6, r6, #(1 << PMSAv7_RSR_EN) @ Set region enabled bit /* Determine whether the D/I-side memory map is unified. We set the * flags here and continue to use them for the rest of this function */ @@ -234,77 +279,189 @@ M_CLASS(ldr r0, [r12, #MPU_TYPE]) tst r0, #MPUIR_nU @ MPUIR_nU = 0 for unified /* Setup second region first to free up r6 */ - set_region_nr r0, #MPU_RAM_REGION, r12 + set_region_nr r0, #PMSAv7_RAM_REGION, r12 isb /* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */ ldr r0, =PLAT_PHYS_OFFSET @ RAM starts at PHYS_OFFSET - ldr r5,=(MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL) + ldr r5,=(PMSAv7_AP_PL1RW_PL0RW | PMSAv7_RGN_NORMAL) - setup_region r0, r5, r6, MPU_DATA_SIDE, r12 @ PHYS_OFFSET, shared, enabled + setup_region r0, r5, r6, PMSAv7_DATA_SIDE, r12 @ PHYS_OFFSET, shared, enabled beq 1f @ Memory-map not unified - setup_region r0, r5, r6, MPU_INSTR_SIDE, r12 @ PHYS_OFFSET, shared, enabled + setup_region r0, r5, r6, PMSAv7_INSTR_SIDE, r12 @ PHYS_OFFSET, shared, enabled 1: isb /* First/background region */ - set_region_nr r0, #MPU_BG_REGION, r12 + set_region_nr r0, #PMSAv7_BG_REGION, r12 isb /* Execute Never, strongly ordered, inaccessible to PL0, rw PL1 */ mov r0, #0 @ BG region starts at 0x0 - ldr r5,=(MPU_ACR_XN | MPU_RGN_STRONGLY_ORDERED | MPU_AP_PL1RW_PL0NA) - mov r6, #MPU_RSR_ALL_MEM @ 4GB region, enabled + ldr r5,=(PMSAv7_ACR_XN | PMSAv7_RGN_STRONGLY_ORDERED | PMSAv7_AP_PL1RW_PL0NA) + mov r6, #PMSAv7_RSR_ALL_MEM @ 4GB region, enabled - setup_region r0, r5, r6, MPU_DATA_SIDE, r12 @ 0x0, BG region, enabled + setup_region r0, r5, r6, PMSAv7_DATA_SIDE, r12 @ 0x0, BG region, enabled beq 2f @ Memory-map not unified - setup_region r0, r5, r6, MPU_INSTR_SIDE r12 @ 0x0, BG region, enabled + setup_region r0, r5, r6, PMSAv7_INSTR_SIDE r12 @ 0x0, BG region, enabled 2: isb #ifdef CONFIG_XIP_KERNEL - set_region_nr r0, #MPU_ROM_REGION, r12 + set_region_nr r0, #PMSAv7_ROM_REGION, r12 isb - ldr r5,=(MPU_AP_PL1RO_PL0NA | MPU_RGN_NORMAL) + ldr r5,=(PMSAv7_AP_PL1RO_PL0NA | PMSAv7_RGN_NORMAL) ldr r0, =CONFIG_XIP_PHYS_ADDR @ ROM start ldr r6, =(_exiprom) @ ROM end sub r6, r6, r0 @ Minimum size of region to map clz r6, r6 @ Region size must be 2^N... rsb r6, r6, #31 @ ...so round up region size - lsl r6, r6, #MPU_RSR_SZ @ Put size in right field - orr r6, r6, #(1 << MPU_RSR_EN) @ Set region enabled bit + lsl r6, r6, #PMSAv7_RSR_SZ @ Put size in right field + orr r6, r6, #(1 << PMSAv7_RSR_EN) @ Set region enabled bit - setup_region r0, r5, r6, MPU_DATA_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled + setup_region r0, r5, r6, PMSAv7_DATA_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled beq 3f @ Memory-map not unified - setup_region r0, r5, r6, MPU_INSTR_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled + setup_region r0, r5, r6, PMSAv7_INSTR_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled 3: isb #endif + ret lr +ENDPROC(__setup_pmsa_v7) + +ENTRY(__setup_pmsa_v8) + mov r0, #0 +AR_CLASS(mcr p15, 0, r0, c6, c2, 1) @ PRSEL +M_CLASS(str r0, [r12, #PMSAv8_RNR]) + isb + +#ifdef CONFIG_XIP_KERNEL + ldr r5, =CONFIG_XIP_PHYS_ADDR @ ROM start + ldr r6, =(_exiprom) @ ROM end + sub r6, r6, #1 + bic r6, r6, #(PMSAv8_MINALIGN - 1) + + orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED) + orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_NORMAL) | PMSAv8_LAR_EN) + +AR_CLASS(mcr p15, 0, r5, c6, c8, 0) @ PRBAR0 +AR_CLASS(mcr p15, 0, r6, c6, c8, 1) @ PRLAR0 +M_CLASS(str r5, [r12, #PMSAv8_RBAR_A(0)]) +M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(0)]) +#endif + + ldr r5, =KERNEL_START + ldr r6, =KERNEL_END + sub r6, r6, #1 + bic r6, r6, #(PMSAv8_MINALIGN - 1) + + orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED) + orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_NORMAL) | PMSAv8_LAR_EN) + +AR_CLASS(mcr p15, 0, r5, c6, c8, 4) @ PRBAR1 +AR_CLASS(mcr p15, 0, r6, c6, c8, 5) @ PRLAR1 +M_CLASS(str r5, [r12, #PMSAv8_RBAR_A(1)]) +M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(1)]) + + /* Setup Background: 0x0 - min(KERNEL_START, XIP_PHYS_ADDR) */ +#ifdef CONFIG_XIP_KERNEL + ldr r6, =KERNEL_START + ldr r5, =CONFIG_XIP_PHYS_ADDR + cmp r6, r5 + movcs r6, r5 +#else + ldr r6, =KERNEL_START +#endif + cmp r6, #0 + beq 1f + + mov r5, #0 + sub r6, r6, #1 + bic r6, r6, #(PMSAv8_MINALIGN - 1) + + orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED | PMSAv8_BAR_XN) + orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) | PMSAv8_LAR_EN) + +AR_CLASS(mcr p15, 0, r5, c6, c9, 0) @ PRBAR2 +AR_CLASS(mcr p15, 0, r6, c6, c9, 1) @ PRLAR2 +M_CLASS(str r5, [r12, #PMSAv8_RBAR_A(2)]) +M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(2)]) + +1: + /* Setup Background: max(KERNEL_END, _exiprom) - 0xffffffff */ +#ifdef CONFIG_XIP_KERNEL + ldr r5, =KERNEL_END + ldr r6, =(_exiprom) + cmp r5, r6 + movcc r5, r6 +#else + ldr r5, =KERNEL_END +#endif + mov r6, #0xffffffff + bic r6, r6, #(PMSAv8_MINALIGN - 1) + + orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED | PMSAv8_BAR_XN) + orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) | PMSAv8_LAR_EN) - /* Enable the MPU */ -AR_CLASS(mrc p15, 0, r0, c1, c0, 0) @ Read SCTLR -AR_CLASS(bic r0, r0, #CR_BR) @ Disable the 'default mem-map' -AR_CLASS(orr r0, r0, #CR_M) @ Set SCTRL.M (MPU on) -AR_CLASS(mcr p15, 0, r0, c1, c0, 0) @ Enable MPU +AR_CLASS(mcr p15, 0, r5, c6, c9, 4) @ PRBAR3 +AR_CLASS(mcr p15, 0, r6, c6, c9, 5) @ PRLAR3 +M_CLASS(str r5, [r12, #PMSAv8_RBAR_A(3)]) +M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(3)]) -M_CLASS(ldr r0, [r12, #MPU_CTRL]) -M_CLASS(bic r0, #MPU_CTRL_PRIVDEFENA) -M_CLASS(orr r0, #MPU_CTRL_ENABLE) -M_CLASS(str r0, [r12, #MPU_CTRL]) +#ifdef CONFIG_XIP_KERNEL + /* Setup Background: min(_exiprom, KERNEL_END) - max(KERNEL_START, XIP_PHYS_ADDR) */ + ldr r5, =(_exiprom) + ldr r6, =KERNEL_END + cmp r5, r6 + movcs r5, r6 + + ldr r6, =KERNEL_START + ldr r0, =CONFIG_XIP_PHYS_ADDR + cmp r6, r0 + movcc r6, r0 + + sub r6, r6, #1 + bic r6, r6, #(PMSAv8_MINALIGN - 1) + + orr r5, r5, #(PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED | PMSAv8_BAR_XN) + orr r6, r6, #(PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) | PMSAv8_LAR_EN) + +#ifdef CONFIG_CPU_V7M + /* There is no alias for n == 4 */ + mov r0, #4 + str r0, [r12, #PMSAv8_RNR] @ PRSEL isb + str r5, [r12, #PMSAv8_RBAR_A(0)] + str r6, [r12, #PMSAv8_RLAR_A(0)] +#else + mcr p15, 0, r5, c6, c10, 1 @ PRBAR4 + mcr p15, 0, r6, c6, c10, 2 @ PRLAR4 +#endif +#endif ret lr -ENDPROC(__setup_mpu) +ENDPROC(__setup_pmsa_v8) #ifdef CONFIG_SMP /* * r6: pointer at mpu_rgn_info */ + .text ENTRY(__secondary_setup_mpu) + /* Use MPU region info supplied by __cpu_up */ + ldr r6, [r7] @ get secondary_data.mpu_rgn_info + /* Probe for v7 PMSA compliance */ mrc p15, 0, r0, c0, c1, 4 @ Read ID_MMFR0 and r0, r0, #(MMFR0_PMSA) @ PMSA field teq r0, #(MMFR0_PMSAv7) @ PMSA v7 - bne __error_p + beq __secondary_setup_pmsa_v7 + teq r0, #(MMFR0_PMSAv8) @ PMSA v8 + beq __secondary_setup_pmsa_v8 + b __error_p +ENDPROC(__secondary_setup_mpu) +/* + * r6: pointer at mpu_rgn_info + */ +ENTRY(__secondary_setup_pmsa_v7) /* Determine whether the D/I-side memory map is unified. We set the * flags here and continue to use them for the rest of this function */ mrc p15, 0, r0, c0, c0, 4 @ MPUIR @@ -328,25 +485,45 @@ ENTRY(__secondary_setup_mpu) ldr r6, [r3, #MPU_RGN_DRSR] ldr r5, [r3, #MPU_RGN_DRACR] - setup_region r0, r5, r6, MPU_DATA_SIDE + setup_region r0, r5, r6, PMSAv7_DATA_SIDE beq 2f - setup_region r0, r5, r6, MPU_INSTR_SIDE + setup_region r0, r5, r6, PMSAv7_INSTR_SIDE 2: isb mrc p15, 0, r0, c0, c0, 4 @ Reevaluate the MPUIR cmp r4, #0 bgt 1b - /* Enable the MPU */ - mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR - bic r0, r0, #CR_BR @ Disable the 'default mem-map' - orr r0, r0, #CR_M @ Set SCTRL.M (MPU on) - mcr p15, 0, r0, c1, c0, 0 @ Enable MPU + ret lr +ENDPROC(__secondary_setup_pmsa_v7) + +ENTRY(__secondary_setup_pmsa_v8) + ldr r4, [r6, #MPU_RNG_INFO_USED] +#ifndef CONFIG_XIP_KERNEL + add r4, r4, #1 +#endif + mov r5, #MPU_RNG_SIZE + add r3, r6, #MPU_RNG_INFO_RNGS + mla r3, r4, r5, r3 + +1: + sub r3, r3, #MPU_RNG_SIZE + sub r4, r4, #1 + + mcr p15, 0, r4, c6, c2, 1 @ PRSEL isb - ret lr -ENDPROC(__secondary_setup_mpu) + ldr r5, [r3, #MPU_RGN_PRBAR] + ldr r6, [r3, #MPU_RGN_PRLAR] + mcr p15, 0, r5, c6, c3, 0 @ PRBAR + mcr p15, 0, r6, c6, c3, 1 @ PRLAR + + cmp r4, #0 + bgt 1b + + ret lr +ENDPROC(__secondary_setup_pmsa_v8) #endif /* CONFIG_SMP */ #endif /* CONFIG_ARM_MPU */ #include "head-common.S" diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 6b38d7a634c19..dd2eb5f76b9f0 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -83,7 +83,7 @@ void machine_crash_nonpanic_core(void *unused) { struct pt_regs regs; - crash_setup_regs(®s, NULL); + crash_setup_regs(®s, get_irq_regs()); printk(KERN_DEBUG "CPU %u will stop doing anything useful since another CPU has crashed\n", smp_processor_id()); crash_save_cpu(®s, smp_processor_id()); @@ -95,6 +95,27 @@ void machine_crash_nonpanic_core(void *unused) cpu_relax(); } +void crash_smp_send_stop(void) +{ + static int cpus_stopped; + unsigned long msecs; + + if (cpus_stopped) + return; + + atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1); + smp_call_function(machine_crash_nonpanic_core, NULL, false); + msecs = 1000; /* Wait at most a second for the other cpus to stop */ + while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) { + mdelay(1); + msecs--; + } + if (atomic_read(&waiting_for_crash_ipi) > 0) + pr_warn("Non-crashing CPUs did not react to IPI\n"); + + cpus_stopped = 1; +} + static void machine_kexec_mask_interrupts(void) { unsigned int i; @@ -120,19 +141,8 @@ static void machine_kexec_mask_interrupts(void) void machine_crash_shutdown(struct pt_regs *regs) { - unsigned long msecs; - local_irq_disable(); - - atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1); - smp_call_function(machine_crash_nonpanic_core, NULL, false); - msecs = 1000; /* Wait at most a second for the other cpus to stop */ - while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) { - mdelay(1); - msecs--; - } - if (atomic_read(&waiting_for_crash_ipi) > 0) - pr_warn("Non-crashing CPUs did not react to IPI\n"); + crash_smp_send_stop(); crash_save_cpu(regs, smp_processor_id()); machine_kexec_mask_interrupts(); diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 7724b0f661b37..36718a4243589 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -205,6 +205,7 @@ void ptrace_break(struct task_struct *tsk, struct pt_regs *regs) { siginfo_t info; + clear_siginfo(&info); info.si_signo = SIGTRAP; info.si_errno = 0; info.si_code = TRAP_BRKPT; diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index fc40a2b40595b..35ca494c028cc 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -754,7 +754,7 @@ int __init arm_add_memory(u64 start, u64 size) else size -= aligned_start - start; -#ifndef CONFIG_ARCH_PHYS_ADDR_T_64BIT +#ifndef CONFIG_PHYS_ADDR_T_64BIT if (aligned_start > ULONG_MAX) { pr_crit("Ignoring memory at 0x%08llx outside 32-bit physical address space\n", (long long)start); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 2da087926ebe1..0978282d5fc27 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -31,6 +31,7 @@ #include <linux/irq_work.h> #include <linux/atomic.h> +#include <asm/bugs.h> #include <asm/smp.h> #include <asm/cacheflush.h> #include <asm/cpu.h> @@ -236,8 +237,6 @@ int __cpu_disable(void) flush_cache_louis(); local_flush_tlb_all(); - clear_tasks_mm_cpumask(cpu); - return 0; } @@ -255,6 +254,7 @@ void __cpu_die(unsigned int cpu) } pr_debug("CPU%u: shutdown\n", cpu); + clear_tasks_mm_cpumask(cpu); /* * platform_cpu_kill() is generally expected to do the powering off * and/or cutting of clocks to the dying CPU. Optionally, this may @@ -405,6 +405,9 @@ asmlinkage void secondary_start_kernel(void) * before we continue - which happens after __cpu_up returns. */ set_cpu_online(cpu, true); + + check_other_bugs(); + complete(&cpu_running); local_irq_enable(); diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c index a40ebb7c0896b..d08099269e35b 100644 --- a/arch/arm/kernel/suspend.c +++ b/arch/arm/kernel/suspend.c @@ -3,6 +3,7 @@ #include <linux/slab.h> #include <linux/mm_types.h> +#include <asm/bugs.h> #include <asm/cacheflush.h> #include <asm/idmap.h> #include <asm/pgalloc.h> @@ -36,6 +37,7 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) cpu_switch_mm(mm->pgd, mm); local_flush_bp_all(); local_flush_tlb_all(); + check_other_bugs(); } return ret; diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index 3bda08bee6747..80517f293eb9c 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -91,18 +91,6 @@ static int proc_status_show(struct seq_file *m, void *v) seq_printf(m, "Last process:\t\t%d\n", previous_pid); return 0; } - -static int proc_status_open(struct inode *inode, struct file *file) -{ - return single_open(file, proc_status_show, PDE_DATA(inode)); -} - -static const struct file_operations proc_status_fops = { - .open = proc_status_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; #endif /* @@ -112,6 +100,7 @@ static void set_segfault(struct pt_regs *regs, unsigned long addr) { siginfo_t info; + clear_siginfo(&info); down_read(¤t->mm->mmap_sem); if (find_vma(current->mm, addr) == NULL) info.si_code = SEGV_MAPERR; @@ -260,7 +249,8 @@ static int __init swp_emulation_init(void) return 0; #ifdef CONFIG_PROC_FS - if (!proc_create("cpu/swp_emulation", S_IRUGO, NULL, &proc_status_fops)) + if (!proc_create_single("cpu/swp_emulation", S_IRUGO, NULL, + proc_status_show)) return -ENOMEM; #endif /* CONFIG_PROC_FS */ diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 5e3633c24e636..badf02ca36938 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -19,6 +19,7 @@ #include <linux/uaccess.h> #include <linux/hardirq.h> #include <linux/kdebug.h> +#include <linux/kprobes.h> #include <linux/module.h> #include <linux/kexec.h> #include <linux/bug.h> @@ -417,7 +418,8 @@ void unregister_undef_hook(struct undef_hook *hook) raw_spin_unlock_irqrestore(&undef_lock, flags); } -static int call_undef_hook(struct pt_regs *regs, unsigned int instr) +static nokprobe_inline +int call_undef_hook(struct pt_regs *regs, unsigned int instr) { struct undef_hook *hook; unsigned long flags; @@ -439,6 +441,7 @@ asmlinkage void do_undefinstr(struct pt_regs *regs) siginfo_t info; void __user *pc; + clear_siginfo(&info); pc = (void __user *)instruction_pointer(regs); if (processor_mode(regs) == SVC_MODE) { @@ -490,6 +493,7 @@ die_sig: arm_notify_die("Oops - undefined instruction", regs, &info, 0, 6); } +NOKPROBE_SYMBOL(do_undefinstr) /* * Handle FIQ similarly to NMI on x86 systems. @@ -537,6 +541,7 @@ static int bad_syscall(int n, struct pt_regs *regs) { siginfo_t info; + clear_siginfo(&info); if ((current->personality & PER_MASK) != PER_LINUX) { send_sig(SIGSEGV, current, 1); return regs->ARM_r0; @@ -604,6 +609,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) { siginfo_t info; + clear_siginfo(&info); if ((no >> 16) != (__ARM_NR_BASE>> 16)) return bad_syscall(no, regs); @@ -740,6 +746,8 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs) unsigned long addr = instruction_pointer(regs); siginfo_t info; + clear_siginfo(&info); + #ifdef CONFIG_DEBUG_USER if (user_debug & UDBG_BADABORT) { pr_err("[%d] %s: bad data abort: code %d instr 0x%08lx\n", diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S index d32f5d35f6022..3593d5c1acd23 100644 --- a/arch/arm/kernel/vmlinux-xip.lds.S +++ b/arch/arm/kernel/vmlinux-xip.lds.S @@ -13,6 +13,7 @@ #include <asm/cache.h> #include <asm/thread_info.h> #include <asm/memory.h> +#include <asm/mpu.h> #include <asm/page.h> #include "vmlinux.lds.h" @@ -148,6 +149,9 @@ SECTIONS __init_end = .; BSS_SECTION(0, 0, 8) +#ifdef CONFIG_ARM_MPU + . = ALIGN(PMSAv8_MINALIGN); +#endif _end = .; STABS_DEBUG diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index b77dc675ae55c..23150c0f0f4d4 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -12,6 +12,7 @@ #include <asm/cache.h> #include <asm/thread_info.h> #include <asm/memory.h> +#include <asm/mpu.h> #include <asm/page.h> #include <asm/pgtable.h> @@ -54,6 +55,9 @@ SECTIONS . = ALIGN(1<<SECTION_SHIFT); #endif +#ifdef CONFIG_ARM_MPU + . = ALIGN(PMSAv8_MINALIGN); +#endif .text : { /* Real text segment */ _stext = .; /* Text and read-only data */ ARM_TEXT @@ -143,6 +147,9 @@ SECTIONS _edata = .; BSS_SECTION(0, 0, 0) +#ifdef CONFIG_ARM_MPU + . = ALIGN(PMSAv8_MINALIGN); +#endif _end = .; STABS_DEBUG diff --git a/arch/arm/kernel/vmlinux.lds.h b/arch/arm/kernel/vmlinux.lds.h index 71281e08e1d45..ae5fdff184061 100644 --- a/arch/arm/kernel/vmlinux.lds.h +++ b/arch/arm/kernel/vmlinux.lds.h @@ -27,24 +27,24 @@ #define PROC_INFO \ . = ALIGN(4); \ - VMLINUX_SYMBOL(__proc_info_begin) = .; \ + __proc_info_begin = .; \ *(.proc.info.init) \ - VMLINUX_SYMBOL(__proc_info_end) = .; + __proc_info_end = .; #define HYPERVISOR_TEXT \ - VMLINUX_SYMBOL(__hyp_text_start) = .; \ + __hyp_text_start = .; \ *(.hyp.text) \ - VMLINUX_SYMBOL(__hyp_text_end) = .; + __hyp_text_end = .; #define IDMAP_TEXT \ ALIGN_FUNCTION(); \ - VMLINUX_SYMBOL(__idmap_text_start) = .; \ + __idmap_text_start = .; \ *(.idmap.text) \ - VMLINUX_SYMBOL(__idmap_text_end) = .; \ + __idmap_text_end = .; \ . = ALIGN(PAGE_SIZE); \ - VMLINUX_SYMBOL(__hyp_idmap_text_start) = .; \ + __hyp_idmap_text_start = .; \ *(.hyp.idmap.text) \ - VMLINUX_SYMBOL(__hyp_idmap_text_end) = .; + __hyp_idmap_text_end = .; #define ARM_DISCARD \ *(.ARM.exidx.exit.text) \ diff --git a/arch/arm/kvm/hyp/hyp-entry.S b/arch/arm/kvm/hyp/hyp-entry.S index 95a2faefc070f..aa3f9a9837aca 100644 --- a/arch/arm/kvm/hyp/hyp-entry.S +++ b/arch/arm/kvm/hyp/hyp-entry.S @@ -16,6 +16,7 @@ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ +#include <linux/arm-smccc.h> #include <linux/linkage.h> #include <asm/kvm_arm.h> #include <asm/kvm_asm.h> @@ -71,6 +72,90 @@ __kvm_hyp_vector: W(b) hyp_irq W(b) hyp_fiq +#ifdef CONFIG_HARDEN_BRANCH_PREDICTOR + .align 5 +__kvm_hyp_vector_ic_inv: + .global __kvm_hyp_vector_ic_inv + + /* + * We encode the exception entry in the bottom 3 bits of + * SP, and we have to guarantee to be 8 bytes aligned. + */ + W(add) sp, sp, #1 /* Reset 7 */ + W(add) sp, sp, #1 /* Undef 6 */ + W(add) sp, sp, #1 /* Syscall 5 */ + W(add) sp, sp, #1 /* Prefetch abort 4 */ + W(add) sp, sp, #1 /* Data abort 3 */ + W(add) sp, sp, #1 /* HVC 2 */ + W(add) sp, sp, #1 /* IRQ 1 */ + W(nop) /* FIQ 0 */ + + mcr p15, 0, r0, c7, c5, 0 /* ICIALLU */ + isb + + b decode_vectors + + .align 5 +__kvm_hyp_vector_bp_inv: + .global __kvm_hyp_vector_bp_inv + + /* + * We encode the exception entry in the bottom 3 bits of + * SP, and we have to guarantee to be 8 bytes aligned. + */ + W(add) sp, sp, #1 /* Reset 7 */ + W(add) sp, sp, #1 /* Undef 6 */ + W(add) sp, sp, #1 /* Syscall 5 */ + W(add) sp, sp, #1 /* Prefetch abort 4 */ + W(add) sp, sp, #1 /* Data abort 3 */ + W(add) sp, sp, #1 /* HVC 2 */ + W(add) sp, sp, #1 /* IRQ 1 */ + W(nop) /* FIQ 0 */ + + mcr p15, 0, r0, c7, c5, 6 /* BPIALL */ + isb + +decode_vectors: + +#ifdef CONFIG_THUMB2_KERNEL + /* + * Yet another silly hack: Use VPIDR as a temp register. + * Thumb2 is really a pain, as SP cannot be used with most + * of the bitwise instructions. The vect_br macro ensures + * things gets cleaned-up. + */ + mcr p15, 4, r0, c0, c0, 0 /* VPIDR */ + mov r0, sp + and r0, r0, #7 + sub sp, sp, r0 + push {r1, r2} + mov r1, r0 + mrc p15, 4, r0, c0, c0, 0 /* VPIDR */ + mrc p15, 0, r2, c0, c0, 0 /* MIDR */ + mcr p15, 4, r2, c0, c0, 0 /* VPIDR */ +#endif + +.macro vect_br val, targ +ARM( eor sp, sp, #\val ) +ARM( tst sp, #7 ) +ARM( eorne sp, sp, #\val ) + +THUMB( cmp r1, #\val ) +THUMB( popeq {r1, r2} ) + + beq \targ +.endm + + vect_br 0, hyp_fiq + vect_br 1, hyp_irq + vect_br 2, hyp_hvc + vect_br 3, hyp_dabt + vect_br 4, hyp_pabt + vect_br 5, hyp_svc + vect_br 6, hyp_undef + vect_br 7, hyp_reset +#endif + .macro invalid_vector label, cause .align \label: mov r0, #\cause @@ -118,7 +203,7 @@ hyp_hvc: lsr r2, r2, #16 and r2, r2, #0xff cmp r2, #0 - bne guest_trap @ Guest called HVC + bne guest_hvc_trap @ Guest called HVC /* * Getting here means host called HVC, we shift parameters and branch @@ -149,7 +234,14 @@ hyp_hvc: bx ip 1: - push {lr} + /* + * Pushing r2 here is just a way of keeping the stack aligned to + * 8 bytes on any path that can trigger a HYP exception. Here, + * we may well be about to jump into the guest, and the guest + * exit would otherwise be badly decoded by our fancy + * "decode-exception-without-a-branch" code... + */ + push {r2, lr} mov lr, r0 mov r0, r1 @@ -159,7 +251,21 @@ hyp_hvc: THUMB( orr lr, #1) blx lr @ Call the HYP function - pop {lr} + pop {r2, lr} + eret + +guest_hvc_trap: + movw r2, #:lower16:ARM_SMCCC_ARCH_WORKAROUND_1 + movt r2, #:upper16:ARM_SMCCC_ARCH_WORKAROUND_1 + ldr r0, [sp] @ Guest's r0 + teq r0, r2 + bne guest_trap + add sp, sp, #12 + @ Returns: + @ r0 = 0 + @ r1 = HSR value (perfectly predictable) + @ r2 = ARM_SMCCC_ARCH_WORKAROUND_1 + mov r0, #0 eret guest_trap: diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index df73914e81c83..746e7801dcdf7 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -38,6 +38,7 @@ ENTRY(__get_user_1) mov r0, #0 ret lr ENDPROC(__get_user_1) +_ASM_NOKPROBE(__get_user_1) ENTRY(__get_user_2) check_uaccess r0, 2, r1, r2, __get_user_bad @@ -58,6 +59,7 @@ rb .req r0 mov r0, #0 ret lr ENDPROC(__get_user_2) +_ASM_NOKPROBE(__get_user_2) ENTRY(__get_user_4) check_uaccess r0, 4, r1, r2, __get_user_bad @@ -65,6 +67,7 @@ ENTRY(__get_user_4) mov r0, #0 ret lr ENDPROC(__get_user_4) +_ASM_NOKPROBE(__get_user_4) ENTRY(__get_user_8) check_uaccess r0, 8, r1, r2, __get_user_bad8 @@ -78,6 +81,7 @@ ENTRY(__get_user_8) mov r0, #0 ret lr ENDPROC(__get_user_8) +_ASM_NOKPROBE(__get_user_8) #ifdef __ARMEB__ ENTRY(__get_user_32t_8) @@ -91,6 +95,7 @@ ENTRY(__get_user_32t_8) mov r0, #0 ret lr ENDPROC(__get_user_32t_8) +_ASM_NOKPROBE(__get_user_32t_8) ENTRY(__get_user_64t_1) check_uaccess r0, 1, r1, r2, __get_user_bad8 @@ -98,6 +103,7 @@ ENTRY(__get_user_64t_1) mov r0, #0 ret lr ENDPROC(__get_user_64t_1) +_ASM_NOKPROBE(__get_user_64t_1) ENTRY(__get_user_64t_2) check_uaccess r0, 2, r1, r2, __get_user_bad8 @@ -114,6 +120,7 @@ rb .req r0 mov r0, #0 ret lr ENDPROC(__get_user_64t_2) +_ASM_NOKPROBE(__get_user_64t_2) ENTRY(__get_user_64t_4) check_uaccess r0, 4, r1, r2, __get_user_bad8 @@ -121,6 +128,7 @@ ENTRY(__get_user_64t_4) mov r0, #0 ret lr ENDPROC(__get_user_64t_4) +_ASM_NOKPROBE(__get_user_64t_4) #endif __get_user_bad8: @@ -131,6 +139,8 @@ __get_user_bad: ret lr ENDPROC(__get_user_bad) ENDPROC(__get_user_bad8) +_ASM_NOKPROBE(__get_user_bad) +_ASM_NOKPROBE(__get_user_bad8) .pushsection __ex_table, "a" .long 1b, __get_user_bad diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig index bb2ce1c63fd96..d3eae6037913a 100644 --- a/arch/arm/mach-axxia/Kconfig +++ b/arch/arm/mach-axxia/Kconfig @@ -2,7 +2,6 @@ config ARCH_AXXIA bool "LSI Axxia platforms" depends on ARCH_MULTI_V7 && ARM_LPAE - select ARCH_DMA_ADDR_T_64BIT select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index c2f3b0d216a4d..c46a728df44ea 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -211,7 +211,6 @@ config ARCH_BRCMSTB select BRCMSTB_L2_IRQ select BCM7120_L2_IRQ select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select ZONE_DMA if ARM_LPAE select SOC_BRCMSTB select SOC_BUS diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 004f9c8de0329..d1e8ce7b4bd21 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -205,12 +205,17 @@ static const short da830_evm_mmc_sd_pins[] = { -1 }; +#define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1) +#define DA830_MMCSD_CD_PIN GPIO_TO_PIN(2, 2) + static struct gpiod_lookup_table mmc_gpios_table = { .dev_id = "da830-mmc.0", .table = { /* gpio chip 1 contains gpio range 32-63 */ - GPIO_LOOKUP("davinci_gpio.1", 2, "cd", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("davinci_gpio.1", 1, "wp", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("davinci_gpio.0", DA830_MMCSD_CD_PIN, "cd", + GPIO_ACTIVE_LOW), + GPIO_LOOKUP("davinci_gpio.0", DA830_MMCSD_WP_PIN, "wp", + GPIO_ACTIVE_LOW), }, }; diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 3063478bcc366..158ed9a1483fc 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -763,12 +763,17 @@ static const short da850_evm_mcasp_pins[] __initconst = { -1 }; +#define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0) +#define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1) + static struct gpiod_lookup_table mmc_gpios_table = { .dev_id = "da830-mmc.0", .table = { /* gpio chip 2 contains gpio range 64-95 */ - GPIO_LOOKUP("davinci_gpio.2", 0, "cd", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("davinci_gpio.2", 1, "wp", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_CD_PIN, "cd", + GPIO_ACTIVE_LOW), + GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_WP_PIN, "wp", + GPIO_ACTIVE_LOW), }, }; diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index cb30637d9eaf8..23ab9e8bc04c0 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -19,6 +19,7 @@ #include <linux/gpio.h> #include <linux/gpio/machine.h> #include <linux/clk.h> +#include <linux/dm9000.h> #include <linux/videodev2.h> #include <media/i2c/tvp514x.h> #include <linux/spi/spi.h> @@ -109,12 +110,15 @@ static struct platform_device davinci_nand_device = { }, }; +#define DM355_I2C_SDA_PIN GPIO_TO_PIN(0, 15) +#define DM355_I2C_SCL_PIN GPIO_TO_PIN(0, 14) + static struct gpiod_lookup_table i2c_recovery_gpiod_table = { - .dev_id = "i2c_davinci", + .dev_id = "i2c_davinci.1", .table = { - GPIO_LOOKUP("davinci_gpio", 15, "sda", + GPIO_LOOKUP("davinci_gpio.0", DM355_I2C_SDA_PIN, "sda", GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - GPIO_LOOKUP("davinci_gpio", 14, "scl", + GPIO_LOOKUP("davinci_gpio.0", DM355_I2C_SCL_PIN, "scl", GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; @@ -179,11 +183,16 @@ static struct resource dm355evm_dm9000_rsrc[] = { }, }; +static struct dm9000_plat_data dm335evm_dm9000_platdata; + static struct platform_device dm355evm_dm9000 = { .name = "dm9000", .id = -1, .resource = dm355evm_dm9000_rsrc, .num_resources = ARRAY_SIZE(dm355evm_dm9000_rsrc), + .dev = { + .platform_data = &dm335evm_dm9000_platdata, + }, }; static struct tvp514x_platform_data tvp5146_pdata = { diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 95b55aae1366f..509e64ab1994a 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -17,6 +17,7 @@ #include <linux/i2c.h> #include <linux/platform_data/pcf857x.h> #include <linux/platform_data/at24.h> +#include <linux/platform_data/gpio-davinci.h> #include <linux/mtd/mtd.h> #include <linux/mtd/rawnand.h> #include <linux/mtd/partitions.h> @@ -596,12 +597,15 @@ static struct i2c_board_info __initdata i2c_info[] = { }, }; +#define DM644X_I2C_SDA_PIN GPIO_TO_PIN(2, 12) +#define DM644X_I2C_SCL_PIN GPIO_TO_PIN(2, 11) + static struct gpiod_lookup_table i2c_recovery_gpiod_table = { - .dev_id = "i2c_davinci", + .dev_id = "i2c_davinci.1", .table = { - GPIO_LOOKUP("davinci_gpio", 44, "sda", + GPIO_LOOKUP("davinci_gpio.0", DM644X_I2C_SDA_PIN, "sda", GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - GPIO_LOOKUP("davinci_gpio", 43, "scl", + GPIO_LOOKUP("davinci_gpio.0", DM644X_I2C_SCL_PIN, "scl", GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 2d37f5b0e1f5c..a3c0d1e876478 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -532,11 +532,12 @@ static struct vpif_display_config dm646x_vpif_display_config = { .set_clock = set_vpif_clock, .subdevinfo = dm646x_vpif_subdev, .subdev_count = ARRAY_SIZE(dm646x_vpif_subdev), + .i2c_adapter_id = 1, .chan_config[0] = { .outputs = dm6467_ch0_outputs, .output_count = ARRAY_SIZE(dm6467_ch0_outputs), }, - .card_name = "DM646x EVM", + .card_name = "DM646x EVM Video Display", }; /** @@ -674,6 +675,7 @@ static struct vpif_capture_config dm646x_vpif_capture_cfg = { .setup_input_channel_mode = setup_vpif_input_channel_mode, .subdev_info = vpif_capture_sdev_info, .subdev_count = ARRAY_SIZE(vpif_capture_sdev_info), + .i2c_adapter_id = 1, .chan_config[0] = { .inputs = dm6467_ch0_inputs, .input_count = ARRAY_SIZE(dm6467_ch0_inputs), @@ -694,6 +696,7 @@ static struct vpif_capture_config dm646x_vpif_capture_cfg = { .fid_pol = 0, }, }, + .card_name = "DM646x EVM Video Capture", }; static void __init evm_init_video(void) diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 0d32042b728fa..be8b892a6ea70 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -123,12 +123,16 @@ static const short hawk_mmcsd0_pins[] = { -1 }; +#define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12) +#define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13) + static struct gpiod_lookup_table mmc_gpios_table = { .dev_id = "da830-mmc.0", .table = { - /* CD: gpio3_12: gpio60: chip 1 contains gpio range 32-63*/ - GPIO_LOOKUP("davinci_gpio.0", 28, "cd", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("davinci_gpio.0", 29, "wp", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("davinci_gpio.0", DA850_HAWK_MMCSD_CD_PIN, "cd", + GPIO_ACTIVE_LOW), + GPIO_LOOKUP("davinci_gpio.0", DA850_HAWK_MMCSD_WP_PIN, "wp", + GPIO_ACTIVE_LOW), }, }; diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 109ab1fa0d2c3..c32ca27ab343d 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -488,7 +488,8 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { [IRQ_DM646X_MCASP0TXINT] = 7, [IRQ_DM646X_MCASP0RXINT] = 7, [IRQ_DM646X_RESERVED_3] = 7, - [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */ + [IRQ_DM646X_MCASP1TXINT] = 7, + [IRQ_TINT0_TINT12] = 7, /* clockevent */ [IRQ_TINT0_TINT34] = 7, /* clocksource */ [IRQ_TINT1_TINT12] = 7, /* DSP timer */ [IRQ_TINT1_TINT34] = 7, /* system tick */ diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index e70feec6fad5e..faf48a3b1fea9 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -323,7 +323,7 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr) /* All EP93xx devices use the same two GPIO pins for I2C bit-banging */ static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.0", .table = { /* Use local offsets on gpiochip/port "G" */ GPIO_LOOKUP_IDX("G", 1, NULL, 0, @@ -635,6 +635,7 @@ EXPORT_SYMBOL(ep93xx_keypad_release_gpio); *************************************************************************/ static struct resource ep93xx_i2s_resource[] = { DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100), + DEFINE_RES_IRQ(IRQ_EP93XX_SAI), }; static struct platform_device ep93xx_i2s_device = { diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 647c319f9f5f0..2ca4058168468 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -112,7 +112,6 @@ config SOC_EXYNOS5440 bool "SAMSUNG EXYNOS5440" default y depends on ARCH_EXYNOS5 - select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select HAVE_ARM_ARCH_TIMER select AUTO_ZRELADDR select PINCTRL_EXYNOS5440 diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig index 81110ec342262..5552968f07f85 100644 --- a/arch/arm/mach-highbank/Kconfig +++ b/arch/arm/mach-highbank/Kconfig @@ -1,7 +1,6 @@ config ARCH_HIGHBANK bool "Calxeda ECX-1000/2000 (Highbank/Midway)" depends on ARCH_MULTI_V7 - select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c index 77def6169f506..44cbbce6bda6a 100644 --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c @@ -51,7 +51,7 @@ static struct platform_device avila_flash = { }; static struct gpiod_lookup_table avila_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.0", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", AVILA_SDA_PIN, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 0f5c99941a7d5..397190f3a8da6 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -70,7 +70,7 @@ static struct platform_device dsmg600_flash = { }; static struct gpiod_lookup_table dsmg600_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.0", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", DSMG600_SDA_PIN, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c index 033f79b35d512..f0a152e365b10 100644 --- a/arch/arm/mach-ixp4xx/fsg-setup.c +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -56,7 +56,7 @@ static struct platform_device fsg_flash = { }; static struct gpiod_lookup_table fsg_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.0", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", FSG_SDA_PIN, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index b168e2fbdbeb4..3ec829d52cdd2 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -124,7 +124,7 @@ static struct platform_device ixdp425_flash_nand = { #endif /* CONFIG_MTD_NAND_PLATFORM */ static struct gpiod_lookup_table ixdp425_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.0", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", IXDP425_SDA_PIN, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 76dfff03cb714..4138d6aa4c52e 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -102,7 +102,7 @@ static struct platform_device nas100d_leds = { }; static struct gpiod_lookup_table nas100d_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.0", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NAS100D_SDA_PIN, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index 91da63a7d7b5f..341b263482ef9 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -70,7 +70,7 @@ static struct platform_device nslu2_flash = { }; static struct gpiod_lookup_table nslu2_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.0", .table = { GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NSLU2_SDA_PIN, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), diff --git a/arch/arm/mach-keystone/pm_domain.c b/arch/arm/mach-keystone/pm_domain.c index fe57e26926292..abca83d22ff3f 100644 --- a/arch/arm/mach-keystone/pm_domain.c +++ b/arch/arm/mach-keystone/pm_domain.c @@ -29,6 +29,7 @@ static struct dev_pm_domain keystone_pm_domain = { static struct pm_clk_notifier_block platform_domain_notifier = { .pm_domain = &keystone_pm_domain, + .con_ids = { NULL }, }; static const struct of_device_id of_keystone_table[] = { diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index 793a24a53c526..d7ca9e2b40d27 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -58,22 +58,24 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id) irq_num = gpio_to_irq(gpio); fiq_count = fiq_buffer[FIQ_CNT_INT_00 + gpio]; - while (irq_counter[gpio] < fiq_count) { - if (gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) { - struct irq_data *d = irq_get_irq_data(irq_num); - - /* - * It looks like handle_edge_irq() that - * OMAP GPIO edge interrupts default to, - * expects interrupt already unmasked. - */ - if (irq_chip && irq_chip->irq_unmask) + if (irq_counter[gpio] < fiq_count && + gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) { + struct irq_data *d = irq_get_irq_data(irq_num); + + /* + * handle_simple_irq() that OMAP GPIO edge + * interrupts default to since commit 80ac93c27441 + * requires interrupt already acked and unmasked. + */ + if (irq_chip) { + if (irq_chip->irq_ack) + irq_chip->irq_ack(d); + if (irq_chip->irq_unmask) irq_chip->irq_unmask(d); } - generic_handle_irq(irq_num); - - irq_counter[gpio]++; } + for (; irq_counter[gpio] < fiq_count; irq_counter[gpio]++) + generic_handle_irq(irq_num); } return IRQ_HANDLED; } diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 76eb6ec5f157e..1e6a967cd2d58 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -188,7 +188,7 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag) ((prev & OMAP_POWERSTATE_MASK) << 0)); trace_power_domain_target_rcuidle(pwrdm->name, trace_state, - smp_processor_id()); + raw_smp_processor_id()); } break; default: @@ -518,7 +518,7 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) { /* Trace the pwrdm desired target state */ trace_power_domain_target_rcuidle(pwrdm->name, pwrst, - smp_processor_id()); + raw_smp_processor_id()); /* Program the pwrdm desired target state */ ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst); } diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 5877e547cecd8..0adb1bd6208e2 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -322,7 +322,7 @@ static struct soc_camera_link palmz72_iclink = { }; static struct gpiod_lookup_table palmz72_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.0", .table = { GPIO_LOOKUP_IDX("gpio-pxa", 118, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 90d0f277de55a..207dcc2e94e70 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -460,7 +460,7 @@ static struct platform_device smc91x_device = { /* i2c */ static struct gpiod_lookup_table viper_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.1", .table = { GPIO_LOOKUP_IDX("gpio-pxa", VIPER_RTC_I2C_SDA_GPIO, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), @@ -789,7 +789,7 @@ static int __init viper_tpm_setup(char *str) __setup("tpm=", viper_tpm_setup); struct gpiod_lookup_table viper_tpm_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.2", .table = { GPIO_LOOKUP_IDX("gpio-pxa", VIPER_TPM_I2C_SDA_GPIO, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index a4065966881ae..fafd3d7f9f8c4 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -3,7 +3,6 @@ config ARCH_ROCKCHIP depends on ARCH_MULTI_V7 select PINCTRL select PINCTRL_ROCKCHIP - select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select ARCH_HAS_RESET_CONTROLLER select ARM_AMBA select ARM_GIC diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c index bdb5ec1cf5600..39aef4876ed41 100644 --- a/arch/arm/mach-rpc/ecard.c +++ b/arch/arm/mach-rpc/ecard.c @@ -657,25 +657,13 @@ static int ecard_devices_proc_show(struct seq_file *m, void *v) return 0; } -static int ecard_devices_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, ecard_devices_proc_show, NULL); -} - -static const struct file_operations bus_ecard_proc_fops = { - .owner = THIS_MODULE, - .open = ecard_devices_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - static struct proc_dir_entry *proc_bus_ecard_dir = NULL; static void ecard_proc_init(void) { proc_bus_ecard_dir = proc_mkdir("bus/ecard", NULL); - proc_create("devices", 0, proc_bus_ecard_dir, &bus_ecard_proc_fops); + proc_create_single("devices", 0, proc_bus_ecard_dir, + ecard_devices_proc_show); } #define ec_set_resource(ec,nr,st,sz) \ diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index ace010479eb6c..f45aed2519ba2 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -327,7 +327,7 @@ static struct platform_device simpad_gpio_leds = { * i2c */ static struct gpiod_lookup_table simpad_i2c_gpiod_table = { - .dev_id = "i2c-gpio", + .dev_id = "i2c-gpio.0", .table = { GPIO_LOOKUP_IDX("gpio", 21, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 280e7312a9e1b..fe60cd09a5ca6 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -29,7 +29,6 @@ config ARCH_RMOBILE menuconfig ARCH_RENESAS bool "Renesas ARM SoCs" depends on ARCH_MULTI_V7 && MMU - select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select ARCH_SHMOBILE select ARM_GIC select GPIOLIB diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 1e0aeb47bac60..7f3b83e0d3246 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -15,6 +15,5 @@ menuconfig ARCH_TEGRA select RESET_CONTROLLER select SOC_BUS select ZONE_DMA if ARM_LPAE - select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE help This enables support for NVIDIA Tegra based systems. diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 7f14acf67caff..96a7b6cf459ba 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -415,6 +415,7 @@ config CPU_V7 select CPU_CP15_MPU if !MMU select CPU_HAS_ASID if MMU select CPU_PABRT_V7 + select CPU_SPECTRE if MMU select CPU_THUMB_CAPABLE select CPU_TLB_V7 if MMU @@ -661,6 +662,7 @@ config ARM_LPAE bool "Support for the Large Physical Address Extension" depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \ !CPU_32v4 && !CPU_32v3 + select PHYS_ADDR_T_64BIT help Say Y if you have an ARMv7 processor supporting the LPAE page table format and you would like to access memory beyond the @@ -673,12 +675,6 @@ config ARM_PV_FIXUP def_bool y depends on ARM_LPAE && ARM_PATCH_PHYS_VIRT && ARCH_KEYSTONE -config ARCH_PHYS_ADDR_T_64BIT - def_bool ARM_LPAE - -config ARCH_DMA_ADDR_T_64BIT - bool - config ARM_THUMB bool "Support Thumb user binaries" if !CPU_THUMBONLY && EXPERT depends on CPU_THUMB_CAPABLE @@ -826,6 +822,28 @@ config CPU_BPREDICT_DISABLE help Say Y here to disable branch prediction. If unsure, say N. +config CPU_SPECTRE + bool + +config HARDEN_BRANCH_PREDICTOR + bool "Harden the branch predictor against aliasing attacks" if EXPERT + depends on CPU_SPECTRE + default y + help + Speculation attacks against some high-performance processors rely + on being able to manipulate the branch predictor for a victim + context by executing aliasing branches in the attacker context. + Such attacks can be partially mitigated against by clearing + internal branch predictor state and limiting the prediction + logic in some situations. + + This config option will take CPU-specific actions to harden + the branch predictor against aliasing attacks and may rely on + specific instruction sequences or control bits being set by + the system firmware. + + If unsure, say Y. + config TLS_REG_EMUL bool select NEED_KUSER_HELPERS diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 9dbb84923e12e..7cb1699fbfc4f 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_MMU) += fault-armv.o flush.o idmap.o ioremap.o \ ifneq ($(CONFIG_MMU),y) obj-y += nommu.o -obj-$(CONFIG_ARM_MPU) += pmsa-v7.o +obj-$(CONFIG_ARM_MPU) += pmsa-v7.o pmsa-v8.o endif obj-$(CONFIG_ARM_PTDUMP_CORE) += dump.o @@ -97,7 +97,7 @@ obj-$(CONFIG_CPU_MOHAWK) += proc-mohawk.o obj-$(CONFIG_CPU_FEROCEON) += proc-feroceon.o obj-$(CONFIG_CPU_V6) += proc-v6.o obj-$(CONFIG_CPU_V6K) += proc-v6.o -obj-$(CONFIG_CPU_V7) += proc-v7.o +obj-$(CONFIG_CPU_V7) += proc-v7.o proc-v7-bugs.o obj-$(CONFIG_CPU_V7M) += proc-v7m.o AFLAGS_proc-v6.o :=-Wa,-march=armv6 diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 2c96190e018bd..bd2c739d80839 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -950,6 +950,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (ai_usermode & UM_SIGNAL) { siginfo_t si; + clear_siginfo(&si); si.si_signo = SIGBUS; si.si_errno = 0; si.si_code = BUS_ADRALN; diff --git a/arch/arm/mm/dma-mapping-nommu.c b/arch/arm/mm/dma-mapping-nommu.c index 619f24a42d092..f448a0663b106 100644 --- a/arch/arm/mm/dma-mapping-nommu.c +++ b/arch/arm/mm/dma-mapping-nommu.c @@ -241,12 +241,3 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, void arch_teardown_dma_ops(struct device *dev) { } - -#define PREALLOC_DMA_DEBUG_ENTRIES 4096 - -static int __init dma_debug_do_init(void) -{ - dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); - return 0; -} -core_initcall(dma_debug_do_init); diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 8c398fedbbb6a..af27f1c22d93b 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -466,12 +466,6 @@ void __init dma_contiguous_early_fixup(phys_addr_t base, unsigned long size) void __init dma_contiguous_remap(void) { int i; - - if (!dma_mmu_remap_num) - return; - - /* call flush_cache_all() since CMA area would be large enough */ - flush_cache_all(); for (i = 0; i < dma_mmu_remap_num; i++) { phys_addr_t start = dma_mmu_remap[i].base; phys_addr_t end = start + dma_mmu_remap[i].size; @@ -504,15 +498,7 @@ void __init dma_contiguous_remap(void) flush_tlb_kernel_range(__phys_to_virt(start), __phys_to_virt(end)); - /* - * All the memory in CMA region will be on ZONE_MOVABLE. - * If that zone is considered as highmem, the memory in CMA - * region is also considered as highmem even if it's - * physical address belong to lowmem. In this case, - * re-mapping isn't required. - */ - if (!is_highmem_idx(ZONE_MOVABLE)) - iotable_init(&map, 1); + iotable_init(&map, 1); } } @@ -845,7 +831,7 @@ static int __arm_dma_mmap(struct device *dev, struct vm_area_struct *vma, unsigned long attrs) { int ret; - unsigned long nr_vma_pages = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; + unsigned long nr_vma_pages = vma_pages(vma); unsigned long nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT; unsigned long pfn = dma_to_pfn(dev, dma_addr); unsigned long off = vma->vm_pgoff; @@ -1165,15 +1151,6 @@ int arm_dma_supported(struct device *dev, u64 mask) return __dma_supported(dev, mask, false); } -#define PREALLOC_DMA_DEBUG_ENTRIES 4096 - -static int __init dma_debug_do_init(void) -{ - dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); - return 0; -} -core_initcall(dma_debug_do_init); - #ifdef CONFIG_ARM_DMA_USE_IOMMU static int __dma_info_to_prot(enum dma_data_direction dir, unsigned long attrs) diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index b75eada23d0a3..84becc911ee33 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -163,6 +163,11 @@ __do_user_fault(struct task_struct *tsk, unsigned long addr, { struct siginfo si; + if (addr > TASK_SIZE) + harden_branch_predictor(); + + clear_siginfo(&si); + #ifdef CONFIG_DEBUG_USER if (((user_debug & UDBG_SEGV) && (sig == SIGSEGV)) || ((user_debug & UDBG_BUS) && (sig == SIGBUS))) { @@ -557,6 +562,7 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) inf->name, fsr, addr); show_pte(current->mm, addr); + clear_siginfo(&info); info.si_signo = inf->sig; info.si_errno = 0; info.si_code = inf->code; @@ -589,6 +595,7 @@ do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs) pr_alert("Unhandled prefetch abort: %s (0x%03x) at 0x%08lx\n", inf->name, ifsr, addr); + clear_siginfo(&info); info.si_signo = inf->sig; info.si_errno = 0; info.si_code = inf->code; diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 7c087961b7ce5..5dd6c58d653b2 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -99,6 +99,38 @@ void __init arm_mm_memblock_reserve(void) memblock_reserve(0, 1); } +static void __init adjust_lowmem_bounds_mpu(void) +{ + unsigned long pmsa = read_cpuid_ext(CPUID_EXT_MMFR0) & MMFR0_PMSA; + + switch (pmsa) { + case MMFR0_PMSAv7: + pmsav7_adjust_lowmem_bounds(); + break; + case MMFR0_PMSAv8: + pmsav8_adjust_lowmem_bounds(); + break; + default: + break; + } +} + +static void __init mpu_setup(void) +{ + unsigned long pmsa = read_cpuid_ext(CPUID_EXT_MMFR0) & MMFR0_PMSA; + + switch (pmsa) { + case MMFR0_PMSAv7: + pmsav7_setup(); + break; + case MMFR0_PMSAv8: + pmsav8_setup(); + break; + default: + break; + } +} + void __init adjust_lowmem_bounds(void) { phys_addr_t end; diff --git a/arch/arm/mm/pmsa-v7.c b/arch/arm/mm/pmsa-v7.c index e2853bfff74ec..699fa2e887253 100644 --- a/arch/arm/mm/pmsa-v7.c +++ b/arch/arm/mm/pmsa-v7.c @@ -102,7 +102,7 @@ static inline u32 irbar_read(void) static inline void rgnr_write(u32 v) { - writel_relaxed(v, BASEADDR_V7M_SCB + MPU_RNR); + writel_relaxed(v, BASEADDR_V7M_SCB + PMSAv7_RNR); } /* Data-side / unified region attributes */ @@ -110,28 +110,28 @@ static inline void rgnr_write(u32 v) /* Region access control register */ static inline void dracr_write(u32 v) { - u32 rsr = readl_relaxed(BASEADDR_V7M_SCB + MPU_RASR) & GENMASK(15, 0); + u32 rsr = readl_relaxed(BASEADDR_V7M_SCB + PMSAv7_RASR) & GENMASK(15, 0); - writel_relaxed((v << 16) | rsr, BASEADDR_V7M_SCB + MPU_RASR); + writel_relaxed((v << 16) | rsr, BASEADDR_V7M_SCB + PMSAv7_RASR); } /* Region size register */ static inline void drsr_write(u32 v) { - u32 racr = readl_relaxed(BASEADDR_V7M_SCB + MPU_RASR) & GENMASK(31, 16); + u32 racr = readl_relaxed(BASEADDR_V7M_SCB + PMSAv7_RASR) & GENMASK(31, 16); - writel_relaxed(v | racr, BASEADDR_V7M_SCB + MPU_RASR); + writel_relaxed(v | racr, BASEADDR_V7M_SCB + PMSAv7_RASR); } /* Region base address register */ static inline void drbar_write(u32 v) { - writel_relaxed(v, BASEADDR_V7M_SCB + MPU_RBAR); + writel_relaxed(v, BASEADDR_V7M_SCB + PMSAv7_RBAR); } static inline u32 drbar_read(void) { - return readl_relaxed(BASEADDR_V7M_SCB + MPU_RBAR); + return readl_relaxed(BASEADDR_V7M_SCB + PMSAv7_RBAR); } /* ARMv7-M only supports a unified MPU, so I-side operations are nop */ @@ -143,11 +143,6 @@ static inline unsigned long irbar_read(void) {return 0;} #endif -static int __init mpu_present(void) -{ - return ((read_cpuid_ext(CPUID_EXT_MMFR0) & MMFR0_PMSA) == MMFR0_PMSAv7); -} - static bool __init try_split_region(phys_addr_t base, phys_addr_t size, struct region *region) { unsigned long subreg, bslots, sslots; @@ -161,7 +156,7 @@ static bool __init try_split_region(phys_addr_t base, phys_addr_t size, struct r bdiff = base - abase; sdiff = p2size - asize; - subreg = p2size / MPU_NR_SUBREGS; + subreg = p2size / PMSAv7_NR_SUBREGS; if ((bdiff % subreg) || (sdiff % subreg)) return false; @@ -172,17 +167,17 @@ static bool __init try_split_region(phys_addr_t base, phys_addr_t size, struct r if (bslots || sslots) { int i; - if (subreg < MPU_MIN_SUBREG_SIZE) + if (subreg < PMSAv7_MIN_SUBREG_SIZE) return false; - if (bslots + sslots > MPU_NR_SUBREGS) + if (bslots + sslots > PMSAv7_NR_SUBREGS) return false; for (i = 0; i < bslots; i++) _set_bit(i, ®ion->subreg); for (i = 1; i <= sslots; i++) - _set_bit(MPU_NR_SUBREGS - i, ®ion->subreg); + _set_bit(PMSAv7_NR_SUBREGS - i, ®ion->subreg); } region->base = abase; @@ -233,7 +228,7 @@ static int __init allocate_region(phys_addr_t base, phys_addr_t size, } /* MPU initialisation functions */ -void __init adjust_lowmem_bounds_mpu(void) +void __init pmsav7_adjust_lowmem_bounds(void) { phys_addr_t specified_mem_size = 0, total_mem_size = 0; struct memblock_region *reg; @@ -243,10 +238,7 @@ void __init adjust_lowmem_bounds_mpu(void) unsigned int mem_max_regions; int num, i; - if (!mpu_present()) - return; - - /* Free-up MPU_PROBE_REGION */ + /* Free-up PMSAv7_PROBE_REGION */ mpu_min_region_order = __mpu_min_region_order(); /* How many regions are supported */ @@ -301,12 +293,12 @@ void __init adjust_lowmem_bounds_mpu(void) num = allocate_region(mem_start, specified_mem_size, mem_max_regions, mem); for (i = 0; i < num; i++) { - unsigned long subreg = mem[i].size / MPU_NR_SUBREGS; + unsigned long subreg = mem[i].size / PMSAv7_NR_SUBREGS; total_mem_size += mem[i].size - subreg * hweight_long(mem[i].subreg); pr_debug("MPU: base %pa size %pa disable subregions: %*pbl\n", - &mem[i].base, &mem[i].size, MPU_NR_SUBREGS, &mem[i].subreg); + &mem[i].base, &mem[i].size, PMSAv7_NR_SUBREGS, &mem[i].subreg); } if (total_mem_size != specified_mem_size) { @@ -349,7 +341,7 @@ static int __init __mpu_min_region_order(void) u32 drbar_result, irbar_result; /* We've kept a region free for this probing */ - rgnr_write(MPU_PROBE_REGION); + rgnr_write(PMSAv7_PROBE_REGION); isb(); /* * As per ARM ARM, write 0xFFFFFFFC to DRBAR to find the minimum @@ -388,8 +380,8 @@ static int __init mpu_setup_region(unsigned int number, phys_addr_t start, return -ENOMEM; /* Writing N to bits 5:1 (RSR_SZ) specifies region size 2^N+1 */ - size_data = ((size_order - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN; - size_data |= subregions << MPU_RSR_SD; + size_data = ((size_order - 1) << PMSAv7_RSR_SZ) | 1 << PMSAv7_RSR_EN; + size_data |= subregions << PMSAv7_RSR_SD; if (need_flush) flush_cache_all(); @@ -424,18 +416,15 @@ static int __init mpu_setup_region(unsigned int number, phys_addr_t start, /* * Set up default MPU regions, doing nothing if there is no MPU */ -void __init mpu_setup(void) +void __init pmsav7_setup(void) { int i, region = 0, err = 0; - if (!mpu_present()) - return; - /* Setup MPU (order is important) */ /* Background */ err |= mpu_setup_region(region++, 0, 32, - MPU_ACR_XN | MPU_RGN_STRONGLY_ORDERED | MPU_AP_PL1RW_PL0RW, + PMSAv7_ACR_XN | PMSAv7_RGN_STRONGLY_ORDERED | PMSAv7_AP_PL1RW_PL0RW, 0, false); #ifdef CONFIG_XIP_KERNEL @@ -448,13 +437,13 @@ void __init mpu_setup(void) * with BG region (which is uncachable), thus we need * to clean and invalidate cache. */ - bool need_flush = region == MPU_RAM_REGION; + bool need_flush = region == PMSAv7_RAM_REGION; if (!xip[i].size) continue; err |= mpu_setup_region(region++, xip[i].base, ilog2(xip[i].size), - MPU_AP_PL1RO_PL0NA | MPU_RGN_NORMAL, + PMSAv7_AP_PL1RO_PL0NA | PMSAv7_RGN_NORMAL, xip[i].subreg, need_flush); } #endif @@ -465,14 +454,14 @@ void __init mpu_setup(void) continue; err |= mpu_setup_region(region++, mem[i].base, ilog2(mem[i].size), - MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL, + PMSAv7_AP_PL1RW_PL0RW | PMSAv7_RGN_NORMAL, mem[i].subreg, false); } /* Vectors */ #ifndef CONFIG_CPU_V7M err |= mpu_setup_region(region++, vectors_base, ilog2(2 * PAGE_SIZE), - MPU_AP_PL1RW_PL0NA | MPU_RGN_NORMAL, + PMSAv7_AP_PL1RW_PL0NA | PMSAv7_RGN_NORMAL, 0, false); #endif if (err) { diff --git a/arch/arm/mm/pmsa-v8.c b/arch/arm/mm/pmsa-v8.c new file mode 100644 index 0000000000000..617a83def88a9 --- /dev/null +++ b/arch/arm/mm/pmsa-v8.c @@ -0,0 +1,307 @@ +/* + * Based on linux/arch/arm/pmsa-v7.c + * + * ARM PMSAv8 supporting functions. + */ + +#include <linux/memblock.h> +#include <linux/range.h> + +#include <asm/cp15.h> +#include <asm/cputype.h> +#include <asm/mpu.h> + +#include <asm/memory.h> +#include <asm/sections.h> + +#include "mm.h" + +#ifndef CONFIG_CPU_V7M + +#define PRSEL __ACCESS_CP15(c6, 0, c2, 1) +#define PRBAR __ACCESS_CP15(c6, 0, c3, 0) +#define PRLAR __ACCESS_CP15(c6, 0, c3, 1) + +static inline u32 prlar_read(void) +{ + return read_sysreg(PRLAR); +} + +static inline u32 prbar_read(void) +{ + return read_sysreg(PRBAR); +} + +static inline void prsel_write(u32 v) +{ + write_sysreg(v, PRSEL); +} + +static inline void prbar_write(u32 v) +{ + write_sysreg(v, PRBAR); +} + +static inline void prlar_write(u32 v) +{ + write_sysreg(v, PRLAR); +} +#else + +static inline u32 prlar_read(void) +{ + return readl_relaxed(BASEADDR_V7M_SCB + PMSAv8_RLAR); +} + +static inline u32 prbar_read(void) +{ + return readl_relaxed(BASEADDR_V7M_SCB + PMSAv8_RBAR); +} + +static inline void prsel_write(u32 v) +{ + writel_relaxed(v, BASEADDR_V7M_SCB + PMSAv8_RNR); +} + +static inline void prbar_write(u32 v) +{ + writel_relaxed(v, BASEADDR_V7M_SCB + PMSAv8_RBAR); +} + +static inline void prlar_write(u32 v) +{ + writel_relaxed(v, BASEADDR_V7M_SCB + PMSAv8_RLAR); +} + +#endif + +static struct range __initdata io[MPU_MAX_REGIONS]; +static struct range __initdata mem[MPU_MAX_REGIONS]; + +static unsigned int __initdata mpu_max_regions; + +static __init bool is_region_fixed(int number) +{ + switch (number) { + case PMSAv8_XIP_REGION: + case PMSAv8_KERNEL_REGION: + return true; + default: + return false; + } +} + +void __init pmsav8_adjust_lowmem_bounds(void) +{ + phys_addr_t mem_end; + struct memblock_region *reg; + bool first = true; + + for_each_memblock(memory, reg) { + if (first) { + phys_addr_t phys_offset = PHYS_OFFSET; + + /* + * Initially only use memory continuous from + * PHYS_OFFSET */ + if (reg->base != phys_offset) + panic("First memory bank must be contiguous from PHYS_OFFSET"); + mem_end = reg->base + reg->size; + first = false; + } else { + /* + * memblock auto merges contiguous blocks, remove + * all blocks afterwards in one go (we can't remove + * blocks separately while iterating) + */ + pr_notice("Ignoring RAM after %pa, memory at %pa ignored\n", + &mem_end, ®->base); + memblock_remove(reg->base, 0 - reg->base); + break; + } + } +} + +static int __init __mpu_max_regions(void) +{ + static int max_regions; + u32 mpuir; + + if (max_regions) + return max_regions; + + mpuir = read_cpuid_mputype(); + + max_regions = (mpuir & MPUIR_DREGION_SZMASK) >> MPUIR_DREGION; + + return max_regions; +} + +static int __init __pmsav8_setup_region(unsigned int number, u32 bar, u32 lar) +{ + if (number > mpu_max_regions + || number >= MPU_MAX_REGIONS) + return -ENOENT; + + dsb(); + prsel_write(number); + isb(); + prbar_write(bar); + prlar_write(lar); + + mpu_rgn_info.rgns[number].prbar = bar; + mpu_rgn_info.rgns[number].prlar = lar; + + mpu_rgn_info.used++; + + return 0; +} + +static int __init pmsav8_setup_ram(unsigned int number, phys_addr_t start,phys_addr_t end) +{ + u32 bar, lar; + + if (is_region_fixed(number)) + return -EINVAL; + + bar = start; + lar = (end - 1) & ~(PMSAv8_MINALIGN - 1);; + + bar |= PMSAv8_AP_PL1RW_PL0RW | PMSAv8_RGN_SHARED; + lar |= PMSAv8_LAR_IDX(PMSAv8_RGN_NORMAL) | PMSAv8_LAR_EN; + + return __pmsav8_setup_region(number, bar, lar); +} + +static int __init pmsav8_setup_io(unsigned int number, phys_addr_t start,phys_addr_t end) +{ + u32 bar, lar; + + if (is_region_fixed(number)) + return -EINVAL; + + bar = start; + lar = (end - 1) & ~(PMSAv8_MINALIGN - 1);; + + bar |= PMSAv8_AP_PL1RW_PL0RW | PMSAv8_RGN_SHARED | PMSAv8_BAR_XN; + lar |= PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) | PMSAv8_LAR_EN; + + return __pmsav8_setup_region(number, bar, lar); +} + +static int __init pmsav8_setup_fixed(unsigned int number, phys_addr_t start,phys_addr_t end) +{ + u32 bar, lar; + + if (!is_region_fixed(number)) + return -EINVAL; + + bar = start; + lar = (end - 1) & ~(PMSAv8_MINALIGN - 1); + + bar |= PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED; + lar |= PMSAv8_LAR_IDX(PMSAv8_RGN_NORMAL) | PMSAv8_LAR_EN; + + prsel_write(number); + isb(); + + if (prbar_read() != bar || prlar_read() != lar) + return -EINVAL; + + /* Reserved region was set up early, we just need a record for secondaries */ + mpu_rgn_info.rgns[number].prbar = bar; + mpu_rgn_info.rgns[number].prlar = lar; + + mpu_rgn_info.used++; + + return 0; +} + +#ifndef CONFIG_CPU_V7M +static int __init pmsav8_setup_vector(unsigned int number, phys_addr_t start,phys_addr_t end) +{ + u32 bar, lar; + + if (number == PMSAv8_KERNEL_REGION) + return -EINVAL; + + bar = start; + lar = (end - 1) & ~(PMSAv8_MINALIGN - 1); + + bar |= PMSAv8_AP_PL1RW_PL0NA | PMSAv8_RGN_SHARED; + lar |= PMSAv8_LAR_IDX(PMSAv8_RGN_NORMAL) | PMSAv8_LAR_EN; + + return __pmsav8_setup_region(number, bar, lar); +} +#endif + +void __init pmsav8_setup(void) +{ + int i, err = 0; + int region = PMSAv8_KERNEL_REGION; + + /* How many regions are supported ? */ + mpu_max_regions = __mpu_max_regions(); + + /* RAM: single chunk of memory */ + add_range(mem, ARRAY_SIZE(mem), 0, memblock.memory.regions[0].base, + memblock.memory.regions[0].base + memblock.memory.regions[0].size); + + /* IO: cover full 4G range */ + add_range(io, ARRAY_SIZE(io), 0, 0, 0xffffffff); + + /* RAM and IO: exclude kernel */ + subtract_range(mem, ARRAY_SIZE(mem), __pa(KERNEL_START), __pa(KERNEL_END)); + subtract_range(io, ARRAY_SIZE(io), __pa(KERNEL_START), __pa(KERNEL_END)); + +#ifdef CONFIG_XIP_KERNEL + /* RAM and IO: exclude xip */ + subtract_range(mem, ARRAY_SIZE(mem), CONFIG_XIP_PHYS_ADDR, __pa(_exiprom)); + subtract_range(io, ARRAY_SIZE(io), CONFIG_XIP_PHYS_ADDR, __pa(_exiprom)); +#endif + +#ifndef CONFIG_CPU_V7M + /* RAM and IO: exclude vectors */ + subtract_range(mem, ARRAY_SIZE(mem), vectors_base, vectors_base + 2 * PAGE_SIZE); + subtract_range(io, ARRAY_SIZE(io), vectors_base, vectors_base + 2 * PAGE_SIZE); +#endif + /* IO: exclude RAM */ + for (i = 0; i < ARRAY_SIZE(mem); i++) + subtract_range(io, ARRAY_SIZE(io), mem[i].start, mem[i].end); + + /* Now program MPU */ + +#ifdef CONFIG_XIP_KERNEL + /* ROM */ + err |= pmsav8_setup_fixed(PMSAv8_XIP_REGION, CONFIG_XIP_PHYS_ADDR, __pa(_exiprom)); +#endif + /* Kernel */ + err |= pmsav8_setup_fixed(region++, __pa(KERNEL_START), __pa(KERNEL_END)); + + + /* IO */ + for (i = 0; i < ARRAY_SIZE(io); i++) { + if (!io[i].end) + continue; + + err |= pmsav8_setup_io(region++, io[i].start, io[i].end); + } + + /* RAM */ + for (i = 0; i < ARRAY_SIZE(mem); i++) { + if (!mem[i].end) + continue; + + err |= pmsav8_setup_ram(region++, mem[i].start, mem[i].end); + } + + /* Vectors */ +#ifndef CONFIG_CPU_V7M + err |= pmsav8_setup_vector(region++, vectors_base, vectors_base + 2 * PAGE_SIZE); +#endif + if (err) + pr_warn("MPU region initialization failure! %d", err); + else + pr_info("Using ARM PMSAv8 Compliant MPU. Used %d of %d regions\n", + mpu_rgn_info.used, mpu_max_regions); +} diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index f10e31d0730af..81d0efb055c66 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -273,13 +273,14 @@ mcr p15, 0, ip, c7, c10, 4 @ data write barrier .endm -.macro define_processor_functions name:req, dabort:req, pabort:req, nommu=0, suspend=0 +.macro define_processor_functions name:req, dabort:req, pabort:req, nommu=0, suspend=0, bugs=0 .type \name\()_processor_functions, #object .align 2 ENTRY(\name\()_processor_functions) .word \dabort .word \pabort .word cpu_\name\()_proc_init + .word \bugs .word cpu_\name\()_proc_fin .word cpu_\name\()_reset .word cpu_\name\()_do_idle diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index c6141a5435c3c..f8d45ad2a515b 100644 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -41,11 +41,6 @@ * even on Cortex-A8 revisions not affected by 430973. * If IBE is not set, the flush BTAC/BTB won't do anything. */ -ENTRY(cpu_ca8_switch_mm) -#ifdef CONFIG_MMU - mov r2, #0 - mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB -#endif ENTRY(cpu_v7_switch_mm) #ifdef CONFIG_MMU mmid r1, r1 @ get mm->context.id @@ -66,7 +61,6 @@ ENTRY(cpu_v7_switch_mm) #endif bx lr ENDPROC(cpu_v7_switch_mm) -ENDPROC(cpu_ca8_switch_mm) /* * cpu_v7_set_pte_ext(ptep, pte) diff --git a/arch/arm/mm/proc-v7-bugs.c b/arch/arm/mm/proc-v7-bugs.c new file mode 100644 index 0000000000000..5544b82a2e7a5 --- /dev/null +++ b/arch/arm/mm/proc-v7-bugs.c @@ -0,0 +1,174 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/arm-smccc.h> +#include <linux/kernel.h> +#include <linux/psci.h> +#include <linux/smp.h> + +#include <asm/cp15.h> +#include <asm/cputype.h> +#include <asm/proc-fns.h> +#include <asm/system_misc.h> + +#ifdef CONFIG_HARDEN_BRANCH_PREDICTOR +DEFINE_PER_CPU(harden_branch_predictor_fn_t, harden_branch_predictor_fn); + +extern void cpu_v7_iciallu_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +extern void cpu_v7_bpiall_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +extern void cpu_v7_smc_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); +extern void cpu_v7_hvc_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm); + +static void harden_branch_predictor_bpiall(void) +{ + write_sysreg(0, BPIALL); +} + +static void harden_branch_predictor_iciallu(void) +{ + write_sysreg(0, ICIALLU); +} + +static void __maybe_unused call_smc_arch_workaround_1(void) +{ + arm_smccc_1_1_smc(ARM_SMCCC_ARCH_WORKAROUND_1, NULL); +} + +static void __maybe_unused call_hvc_arch_workaround_1(void) +{ + arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_WORKAROUND_1, NULL); +} + +static void cpu_v7_spectre_init(void) +{ + const char *spectre_v2_method = NULL; + int cpu = smp_processor_id(); + + if (per_cpu(harden_branch_predictor_fn, cpu)) + return; + + switch (read_cpuid_part()) { + case ARM_CPU_PART_CORTEX_A8: + case ARM_CPU_PART_CORTEX_A9: + case ARM_CPU_PART_CORTEX_A12: + case ARM_CPU_PART_CORTEX_A17: + case ARM_CPU_PART_CORTEX_A73: + case ARM_CPU_PART_CORTEX_A75: + if (processor.switch_mm != cpu_v7_bpiall_switch_mm) + goto bl_error; + per_cpu(harden_branch_predictor_fn, cpu) = + harden_branch_predictor_bpiall; + spectre_v2_method = "BPIALL"; + break; + + case ARM_CPU_PART_CORTEX_A15: + case ARM_CPU_PART_BRAHMA_B15: + if (processor.switch_mm != cpu_v7_iciallu_switch_mm) + goto bl_error; + per_cpu(harden_branch_predictor_fn, cpu) = + harden_branch_predictor_iciallu; + spectre_v2_method = "ICIALLU"; + break; + +#ifdef CONFIG_ARM_PSCI + default: + /* Other ARM CPUs require no workaround */ + if (read_cpuid_implementor() == ARM_CPU_IMP_ARM) + break; + /* fallthrough */ + /* Cortex A57/A72 require firmware workaround */ + case ARM_CPU_PART_CORTEX_A57: + case ARM_CPU_PART_CORTEX_A72: { + struct arm_smccc_res res; + + if (psci_ops.smccc_version == SMCCC_VERSION_1_0) + break; + + switch (psci_ops.conduit) { + case PSCI_CONDUIT_HVC: + arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_FEATURES_FUNC_ID, + ARM_SMCCC_ARCH_WORKAROUND_1, &res); + if ((int)res.a0 != 0) + break; + if (processor.switch_mm != cpu_v7_hvc_switch_mm && cpu) + goto bl_error; + per_cpu(harden_branch_predictor_fn, cpu) = + call_hvc_arch_workaround_1; + processor.switch_mm = cpu_v7_hvc_switch_mm; + spectre_v2_method = "hypervisor"; + break; + + case PSCI_CONDUIT_SMC: + arm_smccc_1_1_smc(ARM_SMCCC_ARCH_FEATURES_FUNC_ID, + ARM_SMCCC_ARCH_WORKAROUND_1, &res); + if ((int)res.a0 != 0) + break; + if (processor.switch_mm != cpu_v7_smc_switch_mm && cpu) + goto bl_error; + per_cpu(harden_branch_predictor_fn, cpu) = + call_smc_arch_workaround_1; + processor.switch_mm = cpu_v7_smc_switch_mm; + spectre_v2_method = "firmware"; + break; + + default: + break; + } + } +#endif + } + + if (spectre_v2_method) + pr_info("CPU%u: Spectre v2: using %s workaround\n", + smp_processor_id(), spectre_v2_method); + return; + +bl_error: + pr_err("CPU%u: Spectre v2: incorrect context switching function, system vulnerable\n", + cpu); +} +#else +static void cpu_v7_spectre_init(void) +{ +} +#endif + +static __maybe_unused bool cpu_v7_check_auxcr_set(bool *warned, + u32 mask, const char *msg) +{ + u32 aux_cr; + + asm("mrc p15, 0, %0, c1, c0, 1" : "=r" (aux_cr)); + + if ((aux_cr & mask) != mask) { + if (!*warned) + pr_err("CPU%u: %s", smp_processor_id(), msg); + *warned = true; + return false; + } + return true; +} + +static DEFINE_PER_CPU(bool, spectre_warned); + +static bool check_spectre_auxcr(bool *warned, u32 bit) +{ + return IS_ENABLED(CONFIG_HARDEN_BRANCH_PREDICTOR) && + cpu_v7_check_auxcr_set(warned, bit, + "Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable\n"); +} + +void cpu_v7_ca8_ibe(void) +{ + if (check_spectre_auxcr(this_cpu_ptr(&spectre_warned), BIT(6))) + cpu_v7_spectre_init(); +} + +void cpu_v7_ca15_ibe(void) +{ + if (check_spectre_auxcr(this_cpu_ptr(&spectre_warned), BIT(0))) + cpu_v7_spectre_init(); +} + +void cpu_v7_bugs_init(void) +{ + cpu_v7_spectre_init(); +} diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index b528a15f460dc..6fe52819e0148 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -9,6 +9,7 @@ * * This is the "shell" of the ARMv7 processor support. */ +#include <linux/arm-smccc.h> #include <linux/init.h> #include <linux/linkage.h> #include <asm/assembler.h> @@ -93,6 +94,37 @@ ENTRY(cpu_v7_dcache_clean_area) ret lr ENDPROC(cpu_v7_dcache_clean_area) +#ifdef CONFIG_ARM_PSCI + .arch_extension sec +ENTRY(cpu_v7_smc_switch_mm) + stmfd sp!, {r0 - r3} + movw r0, #:lower16:ARM_SMCCC_ARCH_WORKAROUND_1 + movt r0, #:upper16:ARM_SMCCC_ARCH_WORKAROUND_1 + smc #0 + ldmfd sp!, {r0 - r3} + b cpu_v7_switch_mm +ENDPROC(cpu_v7_smc_switch_mm) + .arch_extension virt +ENTRY(cpu_v7_hvc_switch_mm) + stmfd sp!, {r0 - r3} + movw r0, #:lower16:ARM_SMCCC_ARCH_WORKAROUND_1 + movt r0, #:upper16:ARM_SMCCC_ARCH_WORKAROUND_1 + hvc #0 + ldmfd sp!, {r0 - r3} + b cpu_v7_switch_mm +ENDPROC(cpu_v7_smc_switch_mm) +#endif +ENTRY(cpu_v7_iciallu_switch_mm) + mov r3, #0 + mcr p15, 0, r3, c7, c5, 0 @ ICIALLU + b cpu_v7_switch_mm +ENDPROC(cpu_v7_iciallu_switch_mm) +ENTRY(cpu_v7_bpiall_switch_mm) + mov r3, #0 + mcr p15, 0, r3, c7, c5, 6 @ flush BTAC/BTB + b cpu_v7_switch_mm +ENDPROC(cpu_v7_bpiall_switch_mm) + string cpu_v7_name, "ARMv7 Processor" .align @@ -158,31 +190,6 @@ ENTRY(cpu_v7_do_resume) ENDPROC(cpu_v7_do_resume) #endif -/* - * Cortex-A8 - */ - globl_equ cpu_ca8_proc_init, cpu_v7_proc_init - globl_equ cpu_ca8_proc_fin, cpu_v7_proc_fin - globl_equ cpu_ca8_reset, cpu_v7_reset - globl_equ cpu_ca8_do_idle, cpu_v7_do_idle - globl_equ cpu_ca8_dcache_clean_area, cpu_v7_dcache_clean_area - globl_equ cpu_ca8_set_pte_ext, cpu_v7_set_pte_ext - globl_equ cpu_ca8_suspend_size, cpu_v7_suspend_size -#ifdef CONFIG_ARM_CPU_SUSPEND - globl_equ cpu_ca8_do_suspend, cpu_v7_do_suspend - globl_equ cpu_ca8_do_resume, cpu_v7_do_resume -#endif - -/* - * Cortex-A9 processor functions - */ - globl_equ cpu_ca9mp_proc_init, cpu_v7_proc_init - globl_equ cpu_ca9mp_proc_fin, cpu_v7_proc_fin - globl_equ cpu_ca9mp_reset, cpu_v7_reset - globl_equ cpu_ca9mp_do_idle, cpu_v7_do_idle - globl_equ cpu_ca9mp_dcache_clean_area, cpu_v7_dcache_clean_area - globl_equ cpu_ca9mp_switch_mm, cpu_v7_switch_mm - globl_equ cpu_ca9mp_set_pte_ext, cpu_v7_set_pte_ext .globl cpu_ca9mp_suspend_size .equ cpu_ca9mp_suspend_size, cpu_v7_suspend_size + 4 * 2 #ifdef CONFIG_ARM_CPU_SUSPEND @@ -547,12 +554,79 @@ __v7_setup_stack: __INITDATA + .weak cpu_v7_bugs_init + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) - define_processor_functions v7, dabort=v7_early_abort, pabort=v7_pabort, suspend=1 + define_processor_functions v7, dabort=v7_early_abort, pabort=v7_pabort, suspend=1, bugs=cpu_v7_bugs_init + +#ifdef CONFIG_HARDEN_BRANCH_PREDICTOR + @ generic v7 bpiall on context switch + globl_equ cpu_v7_bpiall_proc_init, cpu_v7_proc_init + globl_equ cpu_v7_bpiall_proc_fin, cpu_v7_proc_fin + globl_equ cpu_v7_bpiall_reset, cpu_v7_reset + globl_equ cpu_v7_bpiall_do_idle, cpu_v7_do_idle + globl_equ cpu_v7_bpiall_dcache_clean_area, cpu_v7_dcache_clean_area + globl_equ cpu_v7_bpiall_set_pte_ext, cpu_v7_set_pte_ext + globl_equ cpu_v7_bpiall_suspend_size, cpu_v7_suspend_size +#ifdef CONFIG_ARM_CPU_SUSPEND + globl_equ cpu_v7_bpiall_do_suspend, cpu_v7_do_suspend + globl_equ cpu_v7_bpiall_do_resume, cpu_v7_do_resume +#endif + define_processor_functions v7_bpiall, dabort=v7_early_abort, pabort=v7_pabort, suspend=1, bugs=cpu_v7_bugs_init + +#define HARDENED_BPIALL_PROCESSOR_FUNCTIONS v7_bpiall_processor_functions +#else +#define HARDENED_BPIALL_PROCESSOR_FUNCTIONS v7_processor_functions +#endif + #ifndef CONFIG_ARM_LPAE - define_processor_functions ca8, dabort=v7_early_abort, pabort=v7_pabort, suspend=1 - define_processor_functions ca9mp, dabort=v7_early_abort, pabort=v7_pabort, suspend=1 + @ Cortex-A8 - always needs bpiall switch_mm implementation + globl_equ cpu_ca8_proc_init, cpu_v7_proc_init + globl_equ cpu_ca8_proc_fin, cpu_v7_proc_fin + globl_equ cpu_ca8_reset, cpu_v7_reset + globl_equ cpu_ca8_do_idle, cpu_v7_do_idle + globl_equ cpu_ca8_dcache_clean_area, cpu_v7_dcache_clean_area + globl_equ cpu_ca8_set_pte_ext, cpu_v7_set_pte_ext + globl_equ cpu_ca8_switch_mm, cpu_v7_bpiall_switch_mm + globl_equ cpu_ca8_suspend_size, cpu_v7_suspend_size +#ifdef CONFIG_ARM_CPU_SUSPEND + globl_equ cpu_ca8_do_suspend, cpu_v7_do_suspend + globl_equ cpu_ca8_do_resume, cpu_v7_do_resume +#endif + define_processor_functions ca8, dabort=v7_early_abort, pabort=v7_pabort, suspend=1, bugs=cpu_v7_ca8_ibe + + @ Cortex-A9 - needs more registers preserved across suspend/resume + @ and bpiall switch_mm for hardening + globl_equ cpu_ca9mp_proc_init, cpu_v7_proc_init + globl_equ cpu_ca9mp_proc_fin, cpu_v7_proc_fin + globl_equ cpu_ca9mp_reset, cpu_v7_reset + globl_equ cpu_ca9mp_do_idle, cpu_v7_do_idle + globl_equ cpu_ca9mp_dcache_clean_area, cpu_v7_dcache_clean_area +#ifdef CONFIG_HARDEN_BRANCH_PREDICTOR + globl_equ cpu_ca9mp_switch_mm, cpu_v7_bpiall_switch_mm +#else + globl_equ cpu_ca9mp_switch_mm, cpu_v7_switch_mm +#endif + globl_equ cpu_ca9mp_set_pte_ext, cpu_v7_set_pte_ext + define_processor_functions ca9mp, dabort=v7_early_abort, pabort=v7_pabort, suspend=1, bugs=cpu_v7_bugs_init #endif + + @ Cortex-A15 - needs iciallu switch_mm for hardening + globl_equ cpu_ca15_proc_init, cpu_v7_proc_init + globl_equ cpu_ca15_proc_fin, cpu_v7_proc_fin + globl_equ cpu_ca15_reset, cpu_v7_reset + globl_equ cpu_ca15_do_idle, cpu_v7_do_idle + globl_equ cpu_ca15_dcache_clean_area, cpu_v7_dcache_clean_area +#ifdef CONFIG_HARDEN_BRANCH_PREDICTOR + globl_equ cpu_ca15_switch_mm, cpu_v7_iciallu_switch_mm +#else + globl_equ cpu_ca15_switch_mm, cpu_v7_switch_mm +#endif + globl_equ cpu_ca15_set_pte_ext, cpu_v7_set_pte_ext + globl_equ cpu_ca15_suspend_size, cpu_v7_suspend_size + globl_equ cpu_ca15_do_suspend, cpu_v7_do_suspend + globl_equ cpu_ca15_do_resume, cpu_v7_do_resume + define_processor_functions ca15, dabort=v7_early_abort, pabort=v7_pabort, suspend=1, bugs=cpu_v7_ca15_ibe #ifdef CONFIG_CPU_PJ4B define_processor_functions pj4b, dabort=v7_early_abort, pabort=v7_pabort, suspend=1 #endif @@ -669,7 +743,7 @@ __v7_ca7mp_proc_info: __v7_ca12mp_proc_info: .long 0x410fc0d0 .long 0xff0ffff0 - __v7_proc __v7_ca12mp_proc_info, __v7_ca12mp_setup + __v7_proc __v7_ca12mp_proc_info, __v7_ca12mp_setup, proc_fns = HARDENED_BPIALL_PROCESSOR_FUNCTIONS .size __v7_ca12mp_proc_info, . - __v7_ca12mp_proc_info /* @@ -679,7 +753,7 @@ __v7_ca12mp_proc_info: __v7_ca15mp_proc_info: .long 0x410fc0f0 .long 0xff0ffff0 - __v7_proc __v7_ca15mp_proc_info, __v7_ca15mp_setup + __v7_proc __v7_ca15mp_proc_info, __v7_ca15mp_setup, proc_fns = ca15_processor_functions .size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info /* @@ -689,7 +763,7 @@ __v7_ca15mp_proc_info: __v7_b15mp_proc_info: .long 0x420f00f0 .long 0xff0ffff0 - __v7_proc __v7_b15mp_proc_info, __v7_b15mp_setup, cache_fns = b15_cache_fns + __v7_proc __v7_b15mp_proc_info, __v7_b15mp_setup, proc_fns = ca15_processor_functions, cache_fns = b15_cache_fns .size __v7_b15mp_proc_info, . - __v7_b15mp_proc_info /* @@ -699,9 +773,25 @@ __v7_b15mp_proc_info: __v7_ca17mp_proc_info: .long 0x410fc0e0 .long 0xff0ffff0 - __v7_proc __v7_ca17mp_proc_info, __v7_ca17mp_setup + __v7_proc __v7_ca17mp_proc_info, __v7_ca17mp_setup, proc_fns = HARDENED_BPIALL_PROCESSOR_FUNCTIONS .size __v7_ca17mp_proc_info, . - __v7_ca17mp_proc_info + /* ARM Ltd. Cortex A73 processor */ + .type __v7_ca73_proc_info, #object +__v7_ca73_proc_info: + .long 0x410fd090 + .long 0xff0ffff0 + __v7_proc __v7_ca73_proc_info, __v7_setup, proc_fns = HARDENED_BPIALL_PROCESSOR_FUNCTIONS + .size __v7_ca73_proc_info, . - __v7_ca73_proc_info + + /* ARM Ltd. Cortex A75 processor */ + .type __v7_ca75_proc_info, #object +__v7_ca75_proc_info: + .long 0x410fd0a0 + .long 0xff0ffff0 + __v7_proc __v7_ca75_proc_info, __v7_setup, proc_fns = HARDENED_BPIALL_PROCESSOR_FUNCTIONS + .size __v7_ca75_proc_info, . - __v7_ca75_proc_info + /* * Qualcomm Inc. Krait processors. */ diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index b5030e1a41d82..6e8b716130393 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -84,7 +84,7 @@ * * 1. First argument is passed using the arm 32bit registers and rest of the * arguments are passed on stack scratch space. - * 2. First callee-saved arugument is mapped to arm 32 bit registers and rest + * 2. First callee-saved argument is mapped to arm 32 bit registers and rest * arguments are mapped to scratch space on stack. * 3. We need two 64 bit temp registers to do complex operations on eBPF * registers. @@ -234,18 +234,11 @@ static void jit_fill_hole(void *area, unsigned int size) #define SCRATCH_SIZE 80 /* total stack size used in JITed code */ -#define _STACK_SIZE \ - (ctx->prog->aux->stack_depth + \ - + SCRATCH_SIZE + \ - + 4 /* extra for skb_copy_bits buffer */) - -#define STACK_SIZE ALIGN(_STACK_SIZE, STACK_ALIGNMENT) +#define _STACK_SIZE (ctx->prog->aux->stack_depth + SCRATCH_SIZE) +#define STACK_SIZE ALIGN(_STACK_SIZE, STACK_ALIGNMENT) /* Get the offset of eBPF REGISTERs stored on scratch space. */ -#define STACK_VAR(off) (STACK_SIZE-off-4) - -/* Offset of skb_copy_bits buffer */ -#define SKB_BUFFER STACK_VAR(SCRATCH_SIZE) +#define STACK_VAR(off) (STACK_SIZE - off) #if __LINUX_ARM_ARCH__ < 7 @@ -708,7 +701,7 @@ static inline void emit_a32_arsh_r64(const u8 dst[], const u8 src[], bool dstk, } /* dst = dst >> src */ -static inline void emit_a32_lsr_r64(const u8 dst[], const u8 src[], bool dstk, +static inline void emit_a32_rsh_r64(const u8 dst[], const u8 src[], bool dstk, bool sstk, struct jit_ctx *ctx) { const u8 *tmp = bpf2a32[TMP_REG_1]; const u8 *tmp2 = bpf2a32[TMP_REG_2]; @@ -724,7 +717,7 @@ static inline void emit_a32_lsr_r64(const u8 dst[], const u8 src[], bool dstk, emit(ARM_LDR_I(rm, ARM_SP, STACK_VAR(dst_hi)), ctx); } - /* Do LSH operation */ + /* Do RSH operation */ emit(ARM_RSB_I(ARM_IP, rt, 32), ctx); emit(ARM_SUBS_I(tmp2[0], rt, 32), ctx); emit(ARM_MOV_SR(ARM_LR, rd, SRTYPE_LSR, rt), ctx); @@ -774,7 +767,7 @@ static inline void emit_a32_lsh_i64(const u8 dst[], bool dstk, } /* dst = dst >> val */ -static inline void emit_a32_lsr_i64(const u8 dst[], bool dstk, +static inline void emit_a32_rsh_i64(const u8 dst[], bool dstk, const u32 val, struct jit_ctx *ctx) { const u8 *tmp = bpf2a32[TMP_REG_1]; const u8 *tmp2 = bpf2a32[TMP_REG_2]; @@ -1199,8 +1192,8 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx) s32 jmp_offset; #define check_imm(bits, imm) do { \ - if ((((imm) > 0) && ((imm) >> (bits))) || \ - (((imm) < 0) && (~(imm) >> (bits)))) { \ + if ((imm) >= (1 << ((bits) - 1)) || \ + (imm) < -(1 << ((bits) - 1))) { \ pr_info("[%2d] imm=%d(0x%x) out of range\n", \ i, imm, imm); \ return -EINVAL; \ @@ -1330,7 +1323,7 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx) case BPF_ALU64 | BPF_RSH | BPF_K: if (unlikely(imm > 63)) return -EINVAL; - emit_a32_lsr_i64(dst, dstk, imm, ctx); + emit_a32_rsh_i64(dst, dstk, imm, ctx); break; /* dst = dst << src */ case BPF_ALU64 | BPF_LSH | BPF_X: @@ -1338,7 +1331,7 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx) break; /* dst = dst >> src */ case BPF_ALU64 | BPF_RSH | BPF_X: - emit_a32_lsr_r64(dst, src, dstk, sstk, ctx); + emit_a32_rsh_r64(dst, src, dstk, sstk, ctx); break; /* dst = dst >> src (signed) */ case BPF_ALU64 | BPF_ARSH | BPF_X: @@ -1452,83 +1445,6 @@ exit: emit(ARM_LDR_I(rn, ARM_SP, STACK_VAR(src_lo)), ctx); emit_ldx_r(dst, rn, dstk, off, ctx, BPF_SIZE(code)); break; - /* R0 = ntohx(*(size *)(((struct sk_buff *)R6)->data + imm)) */ - case BPF_LD | BPF_ABS | BPF_W: - case BPF_LD | BPF_ABS | BPF_H: - case BPF_LD | BPF_ABS | BPF_B: - /* R0 = ntohx(*(size *)(((struct sk_buff *)R6)->data + src + imm)) */ - case BPF_LD | BPF_IND | BPF_W: - case BPF_LD | BPF_IND | BPF_H: - case BPF_LD | BPF_IND | BPF_B: - { - const u8 r4 = bpf2a32[BPF_REG_6][1]; /* r4 = ptr to sk_buff */ - const u8 r0 = bpf2a32[BPF_REG_0][1]; /*r0: struct sk_buff *skb*/ - /* rtn value */ - const u8 r1 = bpf2a32[BPF_REG_0][0]; /* r1: int k */ - const u8 r2 = bpf2a32[BPF_REG_1][1]; /* r2: unsigned int size */ - const u8 r3 = bpf2a32[BPF_REG_1][0]; /* r3: void *buffer */ - const u8 r6 = bpf2a32[TMP_REG_1][1]; /* r6: void *(*func)(..) */ - int size; - - /* Setting up first argument */ - emit(ARM_MOV_R(r0, r4), ctx); - - /* Setting up second argument */ - emit_a32_mov_i(r1, imm, false, ctx); - if (BPF_MODE(code) == BPF_IND) - emit_a32_alu_r(r1, src_lo, false, sstk, ctx, - false, false, BPF_ADD); - - /* Setting up third argument */ - switch (BPF_SIZE(code)) { - case BPF_W: - size = 4; - break; - case BPF_H: - size = 2; - break; - case BPF_B: - size = 1; - break; - default: - return -EINVAL; - } - emit_a32_mov_i(r2, size, false, ctx); - - /* Setting up fourth argument */ - emit(ARM_ADD_I(r3, ARM_SP, imm8m(SKB_BUFFER)), ctx); - - /* Setting up function pointer to call */ - emit_a32_mov_i(r6, (unsigned int)bpf_load_pointer, false, ctx); - emit_blx_r(r6, ctx); - - emit(ARM_EOR_R(r1, r1, r1), ctx); - /* Check if return address is NULL or not. - * if NULL then jump to epilogue - * else continue to load the value from retn address - */ - emit(ARM_CMP_I(r0, 0), ctx); - jmp_offset = epilogue_offset(ctx); - check_imm24(jmp_offset); - _emit(ARM_COND_EQ, ARM_B(jmp_offset), ctx); - - /* Load value from the address */ - switch (BPF_SIZE(code)) { - case BPF_W: - emit(ARM_LDR_I(r0, r0, 0), ctx); - emit_rev32(r0, r0, ctx); - break; - case BPF_H: - emit(ARM_LDRH_I(r0, r0, 0), ctx); - emit_rev16(r0, r0, ctx); - break; - case BPF_B: - emit(ARM_LDRB_I(r0, r0, 0), ctx); - /* No need to reverse */ - break; - } - break; - } /* ST: *(size *)(dst + off) = imm */ case BPF_ST | BPF_MEM | BPF_W: case BPF_ST | BPF_MEM | BPF_H: diff --git a/arch/arm/probes/kprobes/opt-arm.c b/arch/arm/probes/kprobes/opt-arm.c index bcdecc25461bc..b2aa9b32bff2b 100644 --- a/arch/arm/probes/kprobes/opt-arm.c +++ b/arch/arm/probes/kprobes/opt-arm.c @@ -165,13 +165,14 @@ optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs) { unsigned long flags; struct kprobe *p = &op->kp; - struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + struct kprobe_ctlblk *kcb; /* Save skipped registers */ regs->ARM_pc = (unsigned long)op->kp.addr; regs->ARM_ORIG_r0 = ~0UL; local_irq_save(flags); + kcb = get_kprobe_ctlblk(); if (kprobe_running()) { kprobes_inc_nmissed_count(&op->kp); @@ -191,6 +192,7 @@ optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs) local_irq_restore(flags); } +NOKPROBE_SYMBOL(optimized_callback) int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe *orig) { diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 4c375e11ae953..35d0f823e8239 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -218,8 +218,7 @@ static void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs) { siginfo_t info; - memset(&info, 0, sizeof(info)); - + clear_siginfo(&info); info.si_signo = SIGFPE; info.si_code = sicode; info.si_addr = (void __user *)(instruction_pointer(regs) - 4); @@ -257,7 +256,7 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_ if (exceptions == VFP_EXCEPTION_ERROR) { vfp_panic("unhandled bounce", inst); - vfp_raise_sigfpe(FPE_FIXME, regs); + vfp_raise_sigfpe(FPE_FLTINV, regs); return; } |