summaryrefslogtreecommitdiffstats
path: root/arch/i386/kernel/timers/timer_tsc.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/i386/kernel/timers/timer_tsc.c')
-rw-r--r--arch/i386/kernel/timers/timer_tsc.c560
1 files changed, 560 insertions, 0 deletions
diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c
new file mode 100644
index 0000000000000..a685994e5c8e2
--- /dev/null
+++ b/arch/i386/kernel/timers/timer_tsc.c
@@ -0,0 +1,560 @@
+/*
+ * This code largely moved from arch/i386/kernel/time.c.
+ * See comments there for proper credits.
+ *
+ * 2004-06-25 Jesper Juhl
+ * moved mark_offset_tsc below cpufreq_delayed_get to avoid gcc 3.4
+ * failing to inline.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/timex.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/string.h>
+#include <linux/jiffies.h>
+
+#include <asm/timer.h>
+#include <asm/io.h>
+/* processor.h for distable_tsc flag */
+#include <asm/processor.h>
+
+#include "io_ports.h"
+#include "mach_timer.h"
+
+#include <asm/hpet.h>
+
+#ifdef CONFIG_HPET_TIMER
+static unsigned long hpet_usec_quotient;
+static unsigned long hpet_last;
+static struct timer_opts timer_tsc;
+#endif
+
+static inline void cpufreq_delayed_get(void);
+
+int tsc_disable __initdata = 0;
+
+extern spinlock_t i8253_lock;
+
+static int use_tsc;
+/* Number of usecs that the last interrupt was delayed */
+static int delay_at_last_interrupt;
+
+static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */
+static unsigned long last_tsc_high; /* msb 32 bits of Time Stamp Counter */
+static unsigned long long monotonic_base;
+static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
+
+/* convert from cycles(64bits) => nanoseconds (64bits)
+ * basic equation:
+ * ns = cycles / (freq / ns_per_sec)
+ * ns = cycles * (ns_per_sec / freq)
+ * ns = cycles * (10^9 / (cpu_mhz * 10^6))
+ * ns = cycles * (10^3 / cpu_mhz)
+ *
+ * Then we use scaling math (suggested by george@mvista.com) to get:
+ * ns = cycles * (10^3 * SC / cpu_mhz) / SC
+ * ns = cycles * cyc2ns_scale / SC
+ *
+ * And since SC is a constant power of two, we can convert the div
+ * into a shift.
+ * -johnstul@us.ibm.com "math is hard, lets go shopping!"
+ */
+static unsigned long cyc2ns_scale;
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+
+static inline void set_cyc2ns_scale(unsigned long cpu_mhz)
+{
+ cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz;
+}
+
+static inline unsigned long long cycles_2_ns(unsigned long long cyc)
+{
+ return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
+}
+
+static int count2; /* counter for mark_offset_tsc() */
+
+/* Cached *multiplier* to convert TSC counts to microseconds.
+ * (see the equation below).
+ * Equal to 2^32 * (1 / (clocks per usec) ).
+ * Initialized in time_init.
+ */
+static unsigned long fast_gettimeoffset_quotient;
+
+static unsigned long get_offset_tsc(void)
+{
+ register unsigned long eax, edx;
+
+ /* Read the Time Stamp Counter */
+
+ rdtsc(eax,edx);
+
+ /* .. relative to previous jiffy (32 bits is enough) */
+ eax -= last_tsc_low; /* tsc_low delta */
+
+ /*
+ * Time offset = (tsc_low delta) * fast_gettimeoffset_quotient
+ * = (tsc_low delta) * (usecs_per_clock)
+ * = (tsc_low delta) * (usecs_per_jiffy / clocks_per_jiffy)
+ *
+ * Using a mull instead of a divl saves up to 31 clock cycles
+ * in the critical path.
+ */
+
+ __asm__("mull %2"
+ :"=a" (eax), "=d" (edx)
+ :"rm" (fast_gettimeoffset_quotient),
+ "0" (eax));
+
+ /* our adjusted time offset in microseconds */
+ return delay_at_last_interrupt + edx;
+}
+
+static unsigned long long monotonic_clock_tsc(void)
+{
+ unsigned long long last_offset, this_offset, base;
+ unsigned seq;
+
+ /* atomically read monotonic base & last_offset */
+ do {
+ seq = read_seqbegin(&monotonic_lock);
+ last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+ base = monotonic_base;
+ } while (read_seqretry(&monotonic_lock, seq));
+
+ /* Read the Time Stamp Counter */
+ rdtscll(this_offset);
+
+ /* return the value in ns */
+ return base + cycles_2_ns(this_offset - last_offset);
+}
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ */
+unsigned long long sched_clock(void)
+{
+ unsigned long long this_offset;
+
+ /*
+ * In the NUMA case we dont use the TSC as they are not
+ * synchronized across all CPUs.
+ */
+#ifndef CONFIG_NUMA
+ if (!use_tsc)
+#endif
+ /* no locking but a rare wrong value is not a big deal */
+ return jiffies_64 * (1000000000 / HZ);
+
+ /* Read the Time Stamp Counter */
+ rdtscll(this_offset);
+
+ /* return the value in ns */
+ return cycles_2_ns(this_offset);
+}
+
+static void delay_tsc(unsigned long loops)
+{
+ unsigned long bclock, now;
+
+ rdtscl(bclock);
+ do
+ {
+ rep_nop();
+ rdtscl(now);
+ } while ((now-bclock) < loops);
+}
+
+#ifdef CONFIG_HPET_TIMER
+static void mark_offset_tsc_hpet(void)
+{
+ unsigned long long this_offset, last_offset;
+ unsigned long offset, temp, hpet_current;
+
+ write_seqlock(&monotonic_lock);
+ last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+ /*
+ * It is important that these two operations happen almost at
+ * the same time. We do the RDTSC stuff first, since it's
+ * faster. To avoid any inconsistencies, we need interrupts
+ * disabled locally.
+ */
+ /*
+ * Interrupts are just disabled locally since the timer irq
+ * has the SA_INTERRUPT flag set. -arca
+ */
+ /* read Pentium cycle counter */
+
+ hpet_current = hpet_readl(HPET_COUNTER);
+ rdtsc(last_tsc_low, last_tsc_high);
+
+ /* lost tick compensation */
+ offset = hpet_readl(HPET_T0_CMP) - hpet_tick;
+ if (unlikely(((offset - hpet_last) > hpet_tick) && (hpet_last != 0))) {
+ int lost_ticks = (offset - hpet_last) / hpet_tick;
+ jiffies_64 += lost_ticks;
+ }
+ hpet_last = hpet_current;
+
+ /* update the monotonic base value */
+ this_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+ monotonic_base += cycles_2_ns(this_offset - last_offset);
+ write_sequnlock(&monotonic_lock);
+
+ /* calculate delay_at_last_interrupt */
+ /*
+ * Time offset = (hpet delta) * ( usecs per HPET clock )
+ * = (hpet delta) * ( usecs per tick / HPET clocks per tick)
+ * = (hpet delta) * ( hpet_usec_quotient ) / (2^32)
+ * Where,
+ * hpet_usec_quotient = (2^32 * usecs per tick)/HPET clocks per tick
+ */
+ delay_at_last_interrupt = hpet_current - offset;
+ ASM_MUL64_REG(temp, delay_at_last_interrupt,
+ hpet_usec_quotient, delay_at_last_interrupt);
+}
+#endif
+
+
+#ifdef CONFIG_CPU_FREQ
+#include <linux/workqueue.h>
+
+static unsigned int cpufreq_delayed_issched = 0;
+static unsigned int cpufreq_init = 0;
+static struct work_struct cpufreq_delayed_get_work;
+
+static void handle_cpufreq_delayed_get(void *v)
+{
+ unsigned int cpu;
+ for_each_online_cpu(cpu) {
+ cpufreq_get(cpu);
+ }
+ cpufreq_delayed_issched = 0;
+}
+
+/* if we notice lost ticks, schedule a call to cpufreq_get() as it tries
+ * to verify the CPU frequency the timing core thinks the CPU is running
+ * at is still correct.
+ */
+static inline void cpufreq_delayed_get(void)
+{
+ if (cpufreq_init && !cpufreq_delayed_issched) {
+ cpufreq_delayed_issched = 1;
+ printk(KERN_DEBUG "Losing some ticks... checking if CPU frequency changed.\n");
+ schedule_work(&cpufreq_delayed_get_work);
+ }
+}
+
+/* If the CPU frequency is scaled, TSC-based delays will need a different
+ * loops_per_jiffy value to function properly.
+ */
+
+static unsigned int ref_freq = 0;
+static unsigned long loops_per_jiffy_ref = 0;
+
+#ifndef CONFIG_SMP
+static unsigned long fast_gettimeoffset_ref = 0;
+static unsigned long cpu_khz_ref = 0;
+#endif
+
+static int
+time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
+ void *data)
+{
+ struct cpufreq_freqs *freq = data;
+
+ if (val != CPUFREQ_RESUMECHANGE)
+ write_seqlock_irq(&xtime_lock);
+ if (!ref_freq) {
+ ref_freq = freq->old;
+ loops_per_jiffy_ref = cpu_data[freq->cpu].loops_per_jiffy;
+#ifndef CONFIG_SMP
+ fast_gettimeoffset_ref = fast_gettimeoffset_quotient;
+ cpu_khz_ref = cpu_khz;
+#endif
+ }
+
+ if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) ||
+ (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
+ (val == CPUFREQ_RESUMECHANGE)) {
+ if (!(freq->flags & CPUFREQ_CONST_LOOPS))
+ cpu_data[freq->cpu].loops_per_jiffy = cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new);
+#ifndef CONFIG_SMP
+ if (cpu_khz)
+ cpu_khz = cpufreq_scale(cpu_khz_ref, ref_freq, freq->new);
+ if (use_tsc) {
+ if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {
+ fast_gettimeoffset_quotient = cpufreq_scale(fast_gettimeoffset_ref, freq->new, ref_freq);
+ set_cyc2ns_scale(cpu_khz/1000);
+ }
+ }
+#endif
+ }
+
+ if (val != CPUFREQ_RESUMECHANGE)
+ write_sequnlock_irq(&xtime_lock);
+
+ return 0;
+}
+
+static struct notifier_block time_cpufreq_notifier_block = {
+ .notifier_call = time_cpufreq_notifier
+};
+
+
+static int __init cpufreq_tsc(void)
+{
+ int ret;
+ INIT_WORK(&cpufreq_delayed_get_work, handle_cpufreq_delayed_get, NULL);
+ ret = cpufreq_register_notifier(&time_cpufreq_notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER);
+ if (!ret)
+ cpufreq_init = 1;
+ return ret;
+}
+core_initcall(cpufreq_tsc);
+
+#else /* CONFIG_CPU_FREQ */
+static inline void cpufreq_delayed_get(void) { return; }
+#endif
+
+static void mark_offset_tsc(void)
+{
+ unsigned long lost,delay;
+ unsigned long delta = last_tsc_low;
+ int count;
+ int countmp;
+ static int count1 = 0;
+ unsigned long long this_offset, last_offset;
+ static int lost_count = 0;
+
+ write_seqlock(&monotonic_lock);
+ last_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+ /*
+ * It is important that these two operations happen almost at
+ * the same time. We do the RDTSC stuff first, since it's
+ * faster. To avoid any inconsistencies, we need interrupts
+ * disabled locally.
+ */
+
+ /*
+ * Interrupts are just disabled locally since the timer irq
+ * has the SA_INTERRUPT flag set. -arca
+ */
+
+ /* read Pentium cycle counter */
+
+ rdtsc(last_tsc_low, last_tsc_high);
+
+ spin_lock(&i8253_lock);
+ outb_p(0x00, PIT_MODE); /* latch the count ASAP */
+
+ count = inb_p(PIT_CH0); /* read the latched count */
+ count |= inb(PIT_CH0) << 8;
+
+ /*
+ * VIA686a test code... reset the latch if count > max + 1
+ * from timer_pit.c - cjb
+ */
+ if (count > LATCH) {
+ outb_p(0x34, PIT_MODE);
+ outb_p(LATCH & 0xff, PIT_CH0);
+ outb(LATCH >> 8, PIT_CH0);
+ count = LATCH - 1;
+ }
+
+ spin_unlock(&i8253_lock);
+
+ if (pit_latch_buggy) {
+ /* get center value of last 3 time lutch */
+ if ((count2 >= count && count >= count1)
+ || (count1 >= count && count >= count2)) {
+ count2 = count1; count1 = count;
+ } else if ((count1 >= count2 && count2 >= count)
+ || (count >= count2 && count2 >= count1)) {
+ countmp = count;count = count2;
+ count2 = count1;count1 = countmp;
+ } else {
+ count2 = count1; count1 = count; count = count1;
+ }
+ }
+
+ /* lost tick compensation */
+ delta = last_tsc_low - delta;
+ {
+ register unsigned long eax, edx;
+ eax = delta;
+ __asm__("mull %2"
+ :"=a" (eax), "=d" (edx)
+ :"rm" (fast_gettimeoffset_quotient),
+ "0" (eax));
+ delta = edx;
+ }
+ delta += delay_at_last_interrupt;
+ lost = delta/(1000000/HZ);
+ delay = delta%(1000000/HZ);
+ if (lost >= 2) {
+ jiffies_64 += lost-1;
+
+ /* sanity check to ensure we're not always losing ticks */
+ if (lost_count++ > 100) {
+ printk(KERN_WARNING "Losing too many ticks!\n");
+ printk(KERN_WARNING "TSC cannot be used as a timesource. \n");
+ printk(KERN_WARNING "Possible reasons for this are:\n");
+ printk(KERN_WARNING " You're running with Speedstep,\n");
+ printk(KERN_WARNING " You don't have DMA enabled for your hard disk (see hdparm),\n");
+ printk(KERN_WARNING " Incorrect TSC synchronization on an SMP system (see dmesg).\n");
+ printk(KERN_WARNING "Falling back to a sane timesource now.\n");
+
+ clock_fallback();
+ }
+ /* ... but give the TSC a fair chance */
+ if (lost_count > 25)
+ cpufreq_delayed_get();
+ } else
+ lost_count = 0;
+ /* update the monotonic base value */
+ this_offset = ((unsigned long long)last_tsc_high<<32)|last_tsc_low;
+ monotonic_base += cycles_2_ns(this_offset - last_offset);
+ write_sequnlock(&monotonic_lock);
+
+ /* calculate delay_at_last_interrupt */
+ count = ((LATCH-1) - count) * TICK_SIZE;
+ delay_at_last_interrupt = (count + LATCH/2) / LATCH;
+
+ /* catch corner case where tick rollover occured
+ * between tsc and pit reads (as noted when
+ * usec delta is > 90% # of usecs/tick)
+ */
+ if (lost && abs(delay - delay_at_last_interrupt) > (900000/HZ))
+ jiffies_64++;
+}
+
+static int __init init_tsc(char* override)
+{
+
+ /* check clock override */
+ if (override[0] && strncmp(override,"tsc",3)) {
+#ifdef CONFIG_HPET_TIMER
+ if (is_hpet_enabled()) {
+ printk(KERN_ERR "Warning: clock= override failed. Defaulting to tsc\n");
+ } else
+#endif
+ {
+ return -ENODEV;
+ }
+ }
+
+ /*
+ * If we have APM enabled or the CPU clock speed is variable
+ * (CPU stops clock on HLT or slows clock to save power)
+ * then the TSC timestamps may diverge by up to 1 jiffy from
+ * 'real time' but nothing will break.
+ * The most frequent case is that the CPU is "woken" from a halt
+ * state by the timer interrupt itself, so we get 0 error. In the
+ * rare cases where a driver would "wake" the CPU and request a
+ * timestamp, the maximum error is < 1 jiffy. But timestamps are
+ * still perfectly ordered.
+ * Note that the TSC counter will be reset if APM suspends
+ * to disk; this won't break the kernel, though, 'cuz we're
+ * smart. See arch/i386/kernel/apm.c.
+ */
+ /*
+ * Firstly we have to do a CPU check for chips with
+ * a potentially buggy TSC. At this point we haven't run
+ * the ident/bugs checks so we must run this hook as it
+ * may turn off the TSC flag.
+ *
+ * NOTE: this doesn't yet handle SMP 486 machines where only
+ * some CPU's have a TSC. Thats never worked and nobody has
+ * moaned if you have the only one in the world - you fix it!
+ */
+
+ count2 = LATCH; /* initialize counter for mark_offset_tsc() */
+
+ if (cpu_has_tsc) {
+ unsigned long tsc_quotient;
+#ifdef CONFIG_HPET_TIMER
+ if (is_hpet_enabled()){
+ unsigned long result, remain;
+ printk("Using TSC for gettimeofday\n");
+ tsc_quotient = calibrate_tsc_hpet(NULL);
+ timer_tsc.mark_offset = &mark_offset_tsc_hpet;
+ /*
+ * Math to calculate hpet to usec multiplier
+ * Look for the comments at get_offset_tsc_hpet()
+ */
+ ASM_DIV64_REG(result, remain, hpet_tick,
+ 0, KERNEL_TICK_USEC);
+ if (remain > (hpet_tick >> 1))
+ result++; /* rounding the result */
+
+ hpet_usec_quotient = result;
+ } else
+#endif
+ {
+ tsc_quotient = calibrate_tsc();
+ }
+
+ if (tsc_quotient) {
+ fast_gettimeoffset_quotient = tsc_quotient;
+ use_tsc = 1;
+ /*
+ * We could be more selective here I suspect
+ * and just enable this for the next intel chips ?
+ */
+ /* report CPU clock rate in Hz.
+ * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) =
+ * clock/second. Our precision is about 100 ppm.
+ */
+ { unsigned long eax=0, edx=1000;
+ __asm__("divl %2"
+ :"=a" (cpu_khz), "=d" (edx)
+ :"r" (tsc_quotient),
+ "0" (eax), "1" (edx));
+ printk("Detected %lu.%03lu MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000);
+ }
+ set_cyc2ns_scale(cpu_khz/1000);
+ return 0;
+ }
+ }
+ return -ENODEV;
+}
+
+#ifndef CONFIG_X86_TSC
+/* disable flag for tsc. Takes effect by clearing the TSC cpu flag
+ * in cpu/common.c */
+static int __init tsc_setup(char *str)
+{
+ tsc_disable = 1;
+ return 1;
+}
+#else
+static int __init tsc_setup(char *str)
+{
+ printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
+ "cannot disable TSC.\n");
+ return 1;
+}
+#endif
+__setup("notsc", tsc_setup);
+
+
+
+/************************************************************/
+
+/* tsc timer_opts struct */
+static struct timer_opts timer_tsc = {
+ .name = "tsc",
+ .mark_offset = mark_offset_tsc,
+ .get_offset = get_offset_tsc,
+ .monotonic_clock = monotonic_clock_tsc,
+ .delay = delay_tsc,
+};
+
+struct init_timer_opts __initdata timer_tsc_init = {
+ .init = init_tsc,
+ .opts = &timer_tsc,
+};