diff options
Diffstat (limited to 'arch/i386/pci/fixup.c')
| -rw-r--r-- | arch/i386/pci/fixup.c | 386 |
1 files changed, 386 insertions, 0 deletions
diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c new file mode 100644 index 0000000000000..be52c5ac4e054 --- /dev/null +++ b/arch/i386/pci/fixup.c @@ -0,0 +1,386 @@ +/* + * Exceptions for specific devices. Usually work-arounds for fatal design flaws. + */ + +#include <linux/pci.h> +#include <linux/init.h> +#include "pci.h" + + +static void __devinit pci_fixup_i450nx(struct pci_dev *d) +{ + /* + * i450NX -- Find and scan all secondary buses on all PXB's. + */ + int pxb, reg; + u8 busno, suba, subb; + + printk(KERN_WARNING "PCI: Searching for i450NX host bridges on %s\n", pci_name(d)); + reg = 0xd0; + for(pxb=0; pxb<2; pxb++) { + pci_read_config_byte(d, reg++, &busno); + pci_read_config_byte(d, reg++, &suba); + pci_read_config_byte(d, reg++, &subb); + DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb); + if (busno) + pci_scan_bus(busno, &pci_root_ops, NULL); /* Bus A */ + if (suba < subb) + pci_scan_bus(suba+1, &pci_root_ops, NULL); /* Bus B */ + } + pcibios_last_bus = -1; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx); + +static void __devinit pci_fixup_i450gx(struct pci_dev *d) +{ + /* + * i450GX and i450KX -- Find and scan all secondary buses. + * (called separately for each PCI bridge found) + */ + u8 busno; + pci_read_config_byte(d, 0x4a, &busno); + printk(KERN_INFO "PCI: i440KX/GX host bridge %s: secondary bus %02x\n", pci_name(d), busno); + pci_scan_bus(busno, &pci_root_ops, NULL); + pcibios_last_bus = -1; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454GX, pci_fixup_i450gx); + +static void __devinit pci_fixup_umc_ide(struct pci_dev *d) +{ + /* + * UM8886BF IDE controller sets region type bits incorrectly, + * therefore they look like memory despite of them being I/O. + */ + int i; + + printk(KERN_WARNING "PCI: Fixing base address flags for device %s\n", pci_name(d)); + for(i=0; i<4; i++) + d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide); + +static void __devinit pci_fixup_ncr53c810(struct pci_dev *d) +{ + /* + * NCR 53C810 returns class code 0 (at least on some systems). + * Fix class to be PCI_CLASS_STORAGE_SCSI + */ + if (!d->class) { + printk(KERN_WARNING "PCI: fixing NCR 53C810 class code for %s\n", pci_name(d)); + d->class = PCI_CLASS_STORAGE_SCSI << 8; + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, pci_fixup_ncr53c810); + +static void __devinit pci_fixup_ide_bases(struct pci_dev *d) +{ + int i; + + /* + * PCI IDE controllers use non-standard I/O port decoding, respect it. + */ + if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) + return; + DBG("PCI: IDE base address fixup for %s\n", pci_name(d)); + for(i=0; i<4; i++) { + struct resource *r = &d->resource[i]; + if ((r->start & ~0x80) == 0x374) { + r->start |= 2; + r->end = r->start; + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); + +static void __devinit pci_fixup_ide_trash(struct pci_dev *d) +{ + int i; + + /* + * Runs the fixup only for the first IDE controller + * (Shai Fultheim - shai@ftcon.com) + */ + static int called = 0; + if (called) + return; + called = 1; + + /* + * There exist PCI IDE controllers which have utter garbage + * in first four base registers. Ignore that. + */ + DBG("PCI: IDE base address trash cleared for %s\n", pci_name(d)); + for(i=0; i<4; i++) + d->resource[i].start = d->resource[i].end = d->resource[i].flags = 0; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, pci_fixup_ide_trash); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, pci_fixup_ide_trash); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_11, pci_fixup_ide_trash); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_9, pci_fixup_ide_trash); + +static void __devinit pci_fixup_latency(struct pci_dev *d) +{ + /* + * SiS 5597 and 5598 chipsets require latency timer set to + * at most 32 to avoid lockups. + */ + DBG("PCI: Setting max latency to 32\n"); + pcibios_max_latency = 32; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency); + +static void __devinit pci_fixup_piix4_acpi(struct pci_dev *d) +{ + /* + * PIIX4 ACPI device: hardwired IRQ9 + */ + d->irq = 9; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, pci_fixup_piix4_acpi); + +/* + * Addresses issues with problems in the memory write queue timer in + * certain VIA Northbridges. This bugfix is per VIA's specifications, + * except for the KL133/KM133: clearing bit 5 on those Northbridges seems + * to trigger a bug in its integrated ProSavage video card, which + * causes screen corruption. We only clear bits 6 and 7 for that chipset, + * until VIA can provide us with definitive information on why screen + * corruption occurs, and what exactly those bits do. + * + * VIA 8363,8622,8361 Northbridges: + * - bits 5, 6, 7 at offset 0x55 need to be turned off + * VIA 8367 (KT266x) Northbridges: + * - bits 5, 6, 7 at offset 0x95 need to be turned off + * VIA 8363 rev 0x81/0x84 (KL133/KM133) Northbridges: + * - bits 6, 7 at offset 0x55 need to be turned off + */ + +#define VIA_8363_KL133_REVISION_ID 0x81 +#define VIA_8363_KM133_REVISION_ID 0x84 + +static void __devinit pci_fixup_via_northbridge_bug(struct pci_dev *d) +{ + u8 v; + u8 revision; + int where = 0x55; + int mask = 0x1f; /* clear bits 5, 6, 7 by default */ + + pci_read_config_byte(d, PCI_REVISION_ID, &revision); + + if (d->device == PCI_DEVICE_ID_VIA_8367_0) { + /* fix pci bus latency issues resulted by NB bios error + it appears on bug free^Wreduced kt266x's bios forces + NB latency to zero */ + pci_write_config_byte(d, PCI_LATENCY_TIMER, 0); + + where = 0x95; /* the memory write queue timer register is + different for the KT266x's: 0x95 not 0x55 */ + } else if (d->device == PCI_DEVICE_ID_VIA_8363_0 && + (revision == VIA_8363_KL133_REVISION_ID || + revision == VIA_8363_KM133_REVISION_ID)) { + mask = 0x3f; /* clear only bits 6 and 7; clearing bit 5 + causes screen corruption on the KL133/KM133 */ + } + + pci_read_config_byte(d, where, &v); + if (v & ~mask) { + printk(KERN_WARNING "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \ + d->device, revision, where, v, mask, v & mask); + v &= mask; + pci_write_config_byte(d, where, v); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug); + +/* + * For some reasons Intel decided that certain parts of their + * 815, 845 and some other chipsets must look like PCI-to-PCI bridges + * while they are obviously not. The 82801 family (AA, AB, BAM/CAM, + * BA/CA/DB and E) PCI bridges are actually HUB-to-PCI ones, according + * to Intel terminology. These devices do forward all addresses from + * system to PCI bus no matter what are their window settings, so they are + * "transparent" (or subtractive decoding) from programmers point of view. + */ +static void __devinit pci_fixup_transparent_bridge(struct pci_dev *dev) +{ + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && + (dev->device & 0xff00) == 0x2400) + dev->transparent = 1; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixup_transparent_bridge); + +/* + * Fixup for C1 Halt Disconnect problem on nForce2 systems. + * + * From information provided by "Allen Martin" <AMartin@nvidia.com>: + * + * A hang is caused when the CPU generates a very fast CONNECT/HALT cycle + * sequence. Workaround is to set the SYSTEM_IDLE_TIMEOUT to 80 ns. + * This allows the state-machine and timer to return to a proper state within + * 80 ns of the CONNECT and probe appearing together. Since the CPU will not + * issue another HALT within 80 ns of the initial HALT, the failure condition + * is avoided. + */ +static void __init pci_fixup_nforce2(struct pci_dev *dev) +{ + u32 val; + + /* + * Chip Old value New value + * C17 0x1F0FFF01 0x1F01FF01 + * C18D 0x9F0FFF01 0x9F01FF01 + * + * Northbridge chip version may be determined by + * reading the PCI revision ID (0xC1 or greater is C18D). + */ + pci_read_config_dword(dev, 0x6c, &val); + + /* + * Apply fixup if needed, but don't touch disconnect state + */ + if ((val & 0x00FF0000) != 0x00010000) { + printk(KERN_WARNING "PCI: nForce2 C1 Halt Disconnect fixup\n"); + pci_write_config_dword(dev, 0x6c, (val & 0xFF00FFFF) | 0x00010000); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2); + +/* Max PCI Express root ports */ +#define MAX_PCIEROOT 6 +static int quirk_aspm_offset[MAX_PCIEROOT << 3]; + +#define GET_INDEX(a, b) (((a - PCI_DEVICE_ID_INTEL_MCH_PA) << 3) + b) + +static int quirk_pcie_aspm_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) +{ + return raw_pci_ops->read(0, bus->number, devfn, where, size, value); +} + +/* + * Replace the original pci bus ops for write with a new one that will filter + * the request to insure ASPM cannot be enabled. + */ +static int quirk_pcie_aspm_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) +{ + u8 offset; + + offset = quirk_aspm_offset[GET_INDEX(bus->self->device, devfn)]; + + if ((offset) && (where == offset)) + value = value & 0xfffffffc; + + return raw_pci_ops->write(0, bus->number, devfn, where, size, value); +} + +static struct pci_ops quirk_pcie_aspm_ops = { + .read = quirk_pcie_aspm_read, + .write = quirk_pcie_aspm_write, +}; + +/* + * Prevents PCI Express ASPM (Active State Power Management) being enabled. + * + * Save the register offset, where the ASPM control bits are located, + * for each PCI Express device that is in the device list of + * the root port in an array for fast indexing. Replace the bus ops + * with the modified one. + */ +static void pcie_rootport_aspm_quirk(struct pci_dev *pdev) +{ + int cap_base, i; + struct pci_bus *pbus; + struct pci_dev *dev; + + if ((pbus = pdev->subordinate) == NULL) + return; + + /* + * Check if the DID of pdev matches one of the six root ports. This + * check is needed in the case this function is called directly by the + * hot-plug driver. + */ + if ((pdev->device < PCI_DEVICE_ID_INTEL_MCH_PA) || + (pdev->device > PCI_DEVICE_ID_INTEL_MCH_PC1)) + return; + + if (list_empty(&pbus->devices)) { + /* + * If no device is attached to the root port at power-up or + * after hot-remove, the pbus->devices is empty and this code + * will set the offsets to zero and the bus ops to parent's bus + * ops, which is unmodified. + */ + for (i= GET_INDEX(pdev->device, 0); i <= GET_INDEX(pdev->device, 7); ++i) + quirk_aspm_offset[i] = 0; + + pbus->ops = pbus->parent->ops; + } else { + /* + * If devices are attached to the root port at power-up or + * after hot-add, the code loops through the device list of + * each root port to save the register offsets and replace the + * bus ops. + */ + list_for_each_entry(dev, &pbus->devices, bus_list) { + /* There are 0 to 8 devices attached to this bus */ + cap_base = pci_find_capability(dev, PCI_CAP_ID_EXP); + quirk_aspm_offset[GET_INDEX(pdev->device, dev->devfn)]= cap_base + 0x10; + } + pbus->ops = &quirk_pcie_aspm_ops; + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA, pcie_rootport_aspm_quirk ); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA1, pcie_rootport_aspm_quirk ); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB, pcie_rootport_aspm_quirk ); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB1, pcie_rootport_aspm_quirk ); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC, pcie_rootport_aspm_quirk ); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_rootport_aspm_quirk ); + +/* + * Fixup to mark boot BIOS video selected by BIOS before it changes + * + * From information provided by "Jon Smirl" <jonsmirl@gmail.com> + * + * The standard boot ROM sequence for an x86 machine uses the BIOS + * to select an initial video card for boot display. This boot video + * card will have it's BIOS copied to C0000 in system RAM. + * IORESOURCE_ROM_SHADOW is used to associate the boot video + * card with this copy. On laptops this copy has to be used since + * the main ROM may be compressed or combined with another image. + * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW + * is marked here since the boot video device will be the only enabled + * video device at this point. + */ + +static void __devinit pci_fixup_video(struct pci_dev *pdev) +{ + struct pci_dev *bridge; + struct pci_bus *bus; + u16 config; + + if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA) + return; + + /* Is VGA routed to us? */ + bus = pdev->bus; + while (bus) { + bridge = bus->self; + if (bridge) { + pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, + &config); + if (!(config & PCI_BRIDGE_CTL_VGA)) + return; + } + bus = bus->parent; + } + pci_read_config_word(pdev, PCI_COMMAND, &config); + if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { + pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; + printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev)); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video); |