diff options
Diffstat (limited to 'drivers/net/ethernet/8390/xsurf100.c')
| -rw-r--r-- | drivers/net/ethernet/8390/xsurf100.c | 382 |
1 files changed, 382 insertions, 0 deletions
diff --git a/drivers/net/ethernet/8390/xsurf100.c b/drivers/net/ethernet/8390/xsurf100.c new file mode 100644 index 0000000000000..e2c963821ffe8 --- /dev/null +++ b/drivers/net/ethernet/8390/xsurf100.c @@ -0,0 +1,382 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/platform_device.h> +#include <linux/zorro.h> +#include <net/ax88796.h> +#include <asm/amigaints.h> + +#define ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF100 \ + ZORRO_ID(INDIVIDUAL_COMPUTERS, 0x64, 0) + +#define XS100_IRQSTATUS_BASE 0x40 +#define XS100_8390_BASE 0x800 + +/* Longword-access area. Translated to 2 16-bit access cycles by the + * X-Surf 100 FPGA + */ +#define XS100_8390_DATA32_BASE 0x8000 +#define XS100_8390_DATA32_SIZE 0x2000 +/* Sub-Areas for fast data register access; addresses relative to area begin */ +#define XS100_8390_DATA_READ32_BASE 0x0880 +#define XS100_8390_DATA_WRITE32_BASE 0x0C80 +#define XS100_8390_DATA_AREA_SIZE 0x80 + +#define __NS8390_init ax_NS8390_init + +/* force unsigned long back to 'void __iomem *' */ +#define ax_convert_addr(_a) ((void __force __iomem *)(_a)) + +#define ei_inb(_a) z_readb(ax_convert_addr(_a)) +#define ei_outb(_v, _a) z_writeb(_v, ax_convert_addr(_a)) + +#define ei_inw(_a) z_readw(ax_convert_addr(_a)) +#define ei_outw(_v, _a) z_writew(_v, ax_convert_addr(_a)) + +#define ei_inb_p(_a) ei_inb(_a) +#define ei_outb_p(_v, _a) ei_outb(_v, _a) + +/* define EI_SHIFT() to take into account our register offsets */ +#define EI_SHIFT(x) (ei_local->reg_offset[(x)]) + +/* Ensure we have our RCR base value */ +#define AX88796_PLATFORM + +static unsigned char version[] = + "ax88796.c: Copyright 2005,2007 Simtec Electronics\n"; + +#include "lib8390.c" + +/* from ne.c */ +#define NE_CMD EI_SHIFT(0x00) +#define NE_RESET EI_SHIFT(0x1f) +#define NE_DATAPORT EI_SHIFT(0x10) + +struct xsurf100_ax_plat_data { + struct ax_plat_data ax; + void __iomem *base_regs; + void __iomem *data_area; +}; + +static int is_xsurf100_network_irq(struct platform_device *pdev) +{ + struct xsurf100_ax_plat_data *xs100 = dev_get_platdata(&pdev->dev); + + return (readw(xs100->base_regs + XS100_IRQSTATUS_BASE) & 0xaaaa) != 0; +} + +/* These functions guarantee that the iomem is accessed with 32 bit + * cycles only. z_memcpy_fromio / z_memcpy_toio don't + */ +static void z_memcpy_fromio32(void *dst, const void __iomem *src, size_t bytes) +{ + while (bytes > 32) { + asm __volatile__ + ("movem.l (%0)+,%%d0-%%d7\n" + "movem.l %%d0-%%d7,(%1)\n" + "adda.l #32,%1" : "=a"(src), "=a"(dst) + : "0"(src), "1"(dst) : "d0", "d1", "d2", "d3", "d4", + "d5", "d6", "d7", "memory"); + bytes -= 32; + } + while (bytes) { + *(uint32_t *)dst = z_readl(src); + src += 4; + dst += 4; + bytes -= 4; + } +} + +static void z_memcpy_toio32(void __iomem *dst, const void *src, size_t bytes) +{ + while (bytes) { + z_writel(*(const uint32_t *)src, dst); + src += 4; + dst += 4; + bytes -= 4; + } +} + +static void xs100_write(struct net_device *dev, const void *src, + unsigned int count) +{ + struct ei_device *ei_local = netdev_priv(dev); + struct platform_device *pdev = to_platform_device(dev->dev.parent); + struct xsurf100_ax_plat_data *xs100 = dev_get_platdata(&pdev->dev); + + /* copy whole blocks */ + while (count > XS100_8390_DATA_AREA_SIZE) { + z_memcpy_toio32(xs100->data_area + + XS100_8390_DATA_WRITE32_BASE, src, + XS100_8390_DATA_AREA_SIZE); + src += XS100_8390_DATA_AREA_SIZE; + count -= XS100_8390_DATA_AREA_SIZE; + } + /* copy whole dwords */ + z_memcpy_toio32(xs100->data_area + XS100_8390_DATA_WRITE32_BASE, + src, count & ~3); + src += count & ~3; + if (count & 2) { + ei_outw(*(uint16_t *)src, ei_local->mem + NE_DATAPORT); + src += 2; + } + if (count & 1) + ei_outb(*(uint8_t *)src, ei_local->mem + NE_DATAPORT); +} + +static void xs100_read(struct net_device *dev, void *dst, unsigned int count) +{ + struct ei_device *ei_local = netdev_priv(dev); + struct platform_device *pdev = to_platform_device(dev->dev.parent); + struct xsurf100_ax_plat_data *xs100 = dev_get_platdata(&pdev->dev); + + /* copy whole blocks */ + while (count > XS100_8390_DATA_AREA_SIZE) { + z_memcpy_fromio32(dst, xs100->data_area + + XS100_8390_DATA_READ32_BASE, + XS100_8390_DATA_AREA_SIZE); + dst += XS100_8390_DATA_AREA_SIZE; + count -= XS100_8390_DATA_AREA_SIZE; + } + /* copy whole dwords */ + z_memcpy_fromio32(dst, xs100->data_area + XS100_8390_DATA_READ32_BASE, + count & ~3); + dst += count & ~3; + if (count & 2) { + *(uint16_t *)dst = ei_inw(ei_local->mem + NE_DATAPORT); + dst += 2; + } + if (count & 1) + *(uint8_t *)dst = ei_inb(ei_local->mem + NE_DATAPORT); +} + +/* Block input and output, similar to the Crynwr packet driver. If + * you are porting to a new ethercard, look at the packet driver + * source for hints. The NEx000 doesn't share the on-board packet + * memory -- you have to put the packet out through the "remote DMA" + * dataport using ei_outb. + */ +static void xs100_block_input(struct net_device *dev, int count, + struct sk_buff *skb, int ring_offset) +{ + struct ei_device *ei_local = netdev_priv(dev); + void __iomem *nic_base = ei_local->mem; + char *buf = skb->data; + + if (ei_local->dmaing) { + netdev_err(dev, + "DMAing conflict in %s [DMAstat:%d][irqlock:%d]\n", + __func__, + ei_local->dmaing, ei_local->irqlock); + return; + } + + ei_local->dmaing |= 0x01; + + ei_outb(E8390_NODMA + E8390_PAGE0 + E8390_START, nic_base + NE_CMD); + ei_outb(count & 0xff, nic_base + EN0_RCNTLO); + ei_outb(count >> 8, nic_base + EN0_RCNTHI); + ei_outb(ring_offset & 0xff, nic_base + EN0_RSARLO); + ei_outb(ring_offset >> 8, nic_base + EN0_RSARHI); + ei_outb(E8390_RREAD + E8390_START, nic_base + NE_CMD); + + xs100_read(dev, buf, count); + + ei_local->dmaing &= ~1; +} + +static void xs100_block_output(struct net_device *dev, int count, + const unsigned char *buf, const int start_page) +{ + struct ei_device *ei_local = netdev_priv(dev); + void __iomem *nic_base = ei_local->mem; + unsigned long dma_start; + + /* Round the count up for word writes. Do we need to do this? + * What effect will an odd byte count have on the 8390? I + * should check someday. + */ + if (ei_local->word16 && (count & 0x01)) + count++; + + /* This *shouldn't* happen. If it does, it's the last thing + * you'll see + */ + if (ei_local->dmaing) { + netdev_err(dev, + "DMAing conflict in %s [DMAstat:%d][irqlock:%d]\n", + __func__, + ei_local->dmaing, ei_local->irqlock); + return; + } + + ei_local->dmaing |= 0x01; + /* We should already be in page 0, but to be safe... */ + ei_outb(E8390_PAGE0 + E8390_START + E8390_NODMA, nic_base + NE_CMD); + + ei_outb(ENISR_RDC, nic_base + EN0_ISR); + + /* Now the normal output. */ + ei_outb(count & 0xff, nic_base + EN0_RCNTLO); + ei_outb(count >> 8, nic_base + EN0_RCNTHI); + ei_outb(0x00, nic_base + EN0_RSARLO); + ei_outb(start_page, nic_base + EN0_RSARHI); + + ei_outb(E8390_RWRITE + E8390_START, nic_base + NE_CMD); + + xs100_write(dev, buf, count); + + dma_start = jiffies; + + while ((ei_inb(nic_base + EN0_ISR) & ENISR_RDC) == 0) { + if (jiffies - dma_start > 2 * HZ / 100) { /* 20ms */ + netdev_warn(dev, "timeout waiting for Tx RDC.\n"); + ei_local->reset_8390(dev); + ax_NS8390_init(dev, 1); + break; + } + } + + ei_outb(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ + ei_local->dmaing &= ~0x01; +} + +static int xsurf100_probe(struct zorro_dev *zdev, + const struct zorro_device_id *ent) +{ + struct platform_device *pdev; + struct xsurf100_ax_plat_data ax88796_data; + struct resource res[2] = { + DEFINE_RES_NAMED(IRQ_AMIGA_PORTS, 1, NULL, + IORESOURCE_IRQ | IORESOURCE_IRQ_SHAREABLE), + DEFINE_RES_MEM(zdev->resource.start + XS100_8390_BASE, + 4 * 0x20) + }; + int reg; + /* This table is referenced in the device structure, so it must + * outlive the scope of xsurf100_probe. + */ + static u32 reg_offsets[32]; + int ret = 0; + + /* X-Surf 100 control and 32 bit ring buffer data access areas. + * These resources are not used by the ax88796 driver, so must + * be requested here and passed via platform data. + */ + + if (!request_mem_region(zdev->resource.start, 0x100, zdev->name)) { + dev_err(&zdev->dev, "cannot reserve X-Surf 100 control registers\n"); + return -ENXIO; + } + + if (!request_mem_region(zdev->resource.start + + XS100_8390_DATA32_BASE, + XS100_8390_DATA32_SIZE, + "X-Surf 100 32-bit data access")) { + dev_err(&zdev->dev, "cannot reserve 32-bit area\n"); + ret = -ENXIO; + goto exit_req; + } + + for (reg = 0; reg < 0x20; reg++) + reg_offsets[reg] = 4 * reg; + + memset(&ax88796_data, 0, sizeof(ax88796_data)); + ax88796_data.ax.flags = AXFLG_HAS_EEPROM; + ax88796_data.ax.wordlength = 2; + ax88796_data.ax.dcr_val = 0x48; + ax88796_data.ax.rcr_val = 0x40; + ax88796_data.ax.reg_offsets = reg_offsets; + ax88796_data.ax.check_irq = is_xsurf100_network_irq; + ax88796_data.base_regs = ioremap(zdev->resource.start, 0x100); + + /* error handling for ioremap regs */ + if (!ax88796_data.base_regs) { + dev_err(&zdev->dev, "Cannot ioremap area %pR (registers)\n", + &zdev->resource); + + ret = -ENXIO; + goto exit_req2; + } + + ax88796_data.data_area = ioremap(zdev->resource.start + + XS100_8390_DATA32_BASE, XS100_8390_DATA32_SIZE); + + /* error handling for ioremap data */ + if (!ax88796_data.data_area) { + dev_err(&zdev->dev, + "Cannot ioremap area %pR offset %x (32-bit access)\n", + &zdev->resource, XS100_8390_DATA32_BASE); + + ret = -ENXIO; + goto exit_mem; + } + + ax88796_data.ax.block_output = xs100_block_output; + ax88796_data.ax.block_input = xs100_block_input; + + pdev = platform_device_register_resndata(&zdev->dev, "ax88796", + zdev->slotaddr, res, 2, + &ax88796_data, + sizeof(ax88796_data)); + + if (IS_ERR(pdev)) { + dev_err(&zdev->dev, "cannot register platform device\n"); + ret = -ENXIO; + goto exit_mem2; + } + + zorro_set_drvdata(zdev, pdev); + + if (!ret) + return 0; + + exit_mem2: + iounmap(ax88796_data.data_area); + + exit_mem: + iounmap(ax88796_data.base_regs); + + exit_req2: + release_mem_region(zdev->resource.start + XS100_8390_DATA32_BASE, + XS100_8390_DATA32_SIZE); + + exit_req: + release_mem_region(zdev->resource.start, 0x100); + + return ret; +} + +static void xsurf100_remove(struct zorro_dev *zdev) +{ + struct platform_device *pdev = zorro_get_drvdata(zdev); + struct xsurf100_ax_plat_data *xs100 = dev_get_platdata(&pdev->dev); + + platform_device_unregister(pdev); + + iounmap(xs100->base_regs); + release_mem_region(zdev->resource.start, 0x100); + iounmap(xs100->data_area); + release_mem_region(zdev->resource.start + XS100_8390_DATA32_BASE, + XS100_8390_DATA32_SIZE); +} + +static const struct zorro_device_id xsurf100_zorro_tbl[] = { + { ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF100, }, + { 0 } +}; + +MODULE_DEVICE_TABLE(zorro, xsurf100_zorro_tbl); + +static struct zorro_driver xsurf100_driver = { + .name = "xsurf100", + .id_table = xsurf100_zorro_tbl, + .probe = xsurf100_probe, + .remove = xsurf100_remove, +}; + +module_driver(xsurf100_driver, zorro_register_driver, zorro_unregister_driver); + +MODULE_DESCRIPTION("X-Surf 100 driver"); +MODULE_AUTHOR("Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>"); +MODULE_LICENSE("GPL v2"); |