summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* unicore32: add KBUILD_DEFCONFIG with unicore32_defconfig (old debug_defconfig)Guan Xuetao2011-06-092-2/+3
| | | | | | | | | Rename debug_defconfig to unicore32_defconfig, which is a minimal config for PKUnity-v3 (130nm) SoC board. Also, add KBUILD_DEFCONFIG to use 'make defconfig'. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Arnd Bergmann <arnd@arndb.de>
* unicore32: change zImage physical address, though it's PIC codesGuan Xuetao2011-06-091-1/+1
| | | | | | | | U-boot will load the kernel image to 48M physical memory address. The patch changes it to the correct address, though it's PIC codes. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Arnd Bergmann <arnd@arndb.de>
* unicore32: move rtc-puv3.c to drivers/rtc directoryGuan Xuetao2011-06-097-21/+15
| | | | | | | | | The patch moves rtc driver for PKUnity-v3 SoC from arch/unicore32/kernel/ to drivers/rtc/, with renaming it to rtc-puv3.c. Also, Kconfig, Makefile, and MAINTAINERS are modified correspondingly. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Arnd Bergmann <arnd@arndb.de>
* Merge branch 'pm-fixes' of ↵Linus Torvalds2011-06-082-9/+9
|\ | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Runtime: Fix loops in pm_runtime_clk_notify() PM / Intel IOMMU: Fix init_iommu_pm_ops() for CONFIG_PM unset
| * PM / Runtime: Fix loops in pm_runtime_clk_notify()Rafael J. Wysocki2011-06-071-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | The loops over connection ID strings in pm_runtime_clk_notify() should actually iterate over the strings and not over the elements of the first of them, so make them behave as appropriate. This fixes a regression introduced by commit 600b776eb39a13a28b090 (OMAP1 / PM: Use generic clock manipulation routines for runtime PM). Reported-and-tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
| * PM / Intel IOMMU: Fix init_iommu_pm_ops() for CONFIG_PM unsetRafael J. Wysocki2011-06-071-1/+1
| | | | | | | | | | | | | | | | | | | | If CONFIG_PM is not set, init_iommu_pm_ops() introduced by commit 134fac3f457f3dd753ecdb25e6da3e5f6629f696 (PCI / Intel IOMMU: Use syscore_ops instead of sysdev class and sysdev) is not defined appropriately. Fix this issue. Reported-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* | vfs: reorganize 'struct inode' layout a bitLinus Torvalds2011-06-081-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This tries to make the 'struct inode' accesses denser in the data cache by moving a commonly accessed field (i_security) closer to other fields that are accessed often. It also makes 'i_state' just an 'unsigned int' rather than 'unsigned long', since we only use a few bits of that field, and moves it next to the existing 'i_flags' so that we potentially get better structure layout (although depending on config options, i_flags may already have packed in the same word as i_lock, so this improves packing only for the case of spinlock debugging) Out 'struct inode' is still way too big, and we should probably move some other fields around too (the acl fields in particular) for better data cache access density. Other fields (like the inode hash) are likely to be entirely irrelevant under most loads. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | selinux: simplify and clean up inode_has_perm()Linus Torvalds2011-06-081-10/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a rather hot function that is called with a potentially NULL "struct common_audit_data" pointer argument. And in that case it has to provide and initialize its own dummy common_audit_data structure. However, all the _common_ cases already pass it a real audit-data structure, so that uncommon NULL case not only creates a silly run-time test, more importantly it causes that function to have a big stack frame for the dummy variable that isn't even used in the common case! So get rid of that stupid run-time behavior, and make the (few) functions that currently call with a NULL pointer just call a new helper function instead (naturally called inode_has_perm_noapd(), since it has no adp argument). This makes the run-time test be a static code generation issue instead, and allows for a much denser stack since none of the common callers need the dummy structure. And a denser stack not only means less stack space usage, it means better cache behavior. So we have a win-win-win from this simplification: less code executed, smaller stack footprint, and better cache behavior. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'usb-linus' of ↵Linus Torvalds2011-06-0832-50/+194
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (28 commits) MAINTAINERS: add a maintainer to Gadget Framework USB: serial: add another 4N-GALAXY.DE PID to ftdi_sio driver Revert "USB: option: add ID for ZTE MF 330" drivers/usb/host/ohci-pxa27x.c: add missing clk_put USB: CONFIG_USB_GADGET_DUALSPEED is not user-configurable USB: dummy-hcd needs the has_tt flag usb-storage: redo incorrect reads usb/renesas_usbhs: free uep on removal usb/s3c-hsudc: fix error path usb/pxa25x_udc: cleanup the LUBBOCK err path usb/mv_udc_core: fix compile usb: gadget: include <linux/prefetch.h> to fix compiling error USB: s3c-hsotg: Tone down debugging usb: remove bad dput after dentry_unhash USB: core: Tolerate protocol stall during hub and port status read musb: fix prefetch build failure USB: cdc-acm: Adding second ACM channel support for Nokia E7 and C7 usb-gadget: unlock data->lock mutex on error path in ep_write() USB: option Add blacklist for ZTE K3765-Z (19d2:2002) option: add Prolink PH300 modem IDs ...
| * | MAINTAINERS: add a maintainer to Gadget FrameworkFelipe Balbi2011-06-081-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | I'll be continuing the amazing work Dave has done with the Gadget Framework. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | Merge 3.0-rc2 + Linus's latest into usb-linusGreg Kroah-Hartman2011-06-08161-1469/+1950
| |\ \ | | | | | | | | | | | | | | | | | | | | This is needed to get the following MAINTAINERS patch to apply properly. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | USB: serial: add another 4N-GALAXY.DE PID to ftdi_sio driverSteffen Sledz2011-06-082-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | E.g. newer CAN 2.0 A/B <=> USB 2.0 converters report idProduct=f3c2. Signed-off-by: Steffen Sledz <sledz@dresearch-fe.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | Revert "USB: option: add ID for ZTE MF 330"Greg Kroah-Hartman2011-06-071-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit a559d2c8c1bf652ea2d0ecd6ab4a250fcdb37db8. Turns out that device id 0x1d6b:0x0002 is a USB hub, which causes havoc when the option driver tries to bind to it. So revert this as it doesn't seem to be needed at all. Thanks to Michael Tokarev and Paweł Drobek for working on resolving this issue. Cc: Paweł Drobek <pawel.drobek@gmail.com> Cc: Michael Tokarev <mjt@tls.msk.ru> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | drivers/usb/host/ohci-pxa27x.c: add missing clk_putJulia Lawall2011-06-071-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a label before the call to clk_put and jump to that in the error handling code that occurs after the call to clk_get has succeeded. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression e1,e2; statement S; @@ e1 = clk_get@p1(...); ... when != e1 = e2 when != clk_put(e1) when any if (...) { ... when != clk_put(e1) when != if (...) { ... clk_put(e1) ... } * return@p3 ...; } else S // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | USB: CONFIG_USB_GADGET_DUALSPEED is not user-configurableAlan Stern2011-06-071-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1468) changes the Kconfig definition for USB_GADGET_DUALSPEED. This option is determined entirely by which device controller drivers are to be built, through Select statements; it does not need to be (and should not be) configurable by the user. Also, the "default n" line is superfluous -- everything defaults to N. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | USB: dummy-hcd needs the has_tt flagAlan Stern2011-06-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Like with other host controllers capable of operating at both high speed and full speed, we need to indicate that the emulated controller presented by dummy-hcd has this ability. Otherwise usbcore will not accept full-speed gadgets under dummy-hcd. This patch (as1469) sets the appropriate has_tt flag. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | usb-storage: redo incorrect readsAlan Stern2011-06-076-2/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some USB mass-storage devices have bugs that cause them not to handle the first READ(10) command they receive correctly. The Corsair Padlock v2 returns completely bogus data for its first read (possibly it returns the data in encrypted form even though the device is supposed to be unlocked). The Feiya SD/SDHC card reader fails to complete the first READ(10) command after it is plugged in or after a new card is inserted, returning a status code that indicates it thinks the command was invalid, which prevents the kernel from retrying the read. Since the first read of a new device or a new medium is for the partition sector, the kernel is unable to retrieve the device's partition table. Users have to manually issue an "hdparm -z" or "blockdev --rereadpt" command before they can access the device. This patch (as1470) works around the problem. It adds a new quirk flag, US_FL_INVALID_READ10, indicating that the first READ(10) should always be retried immediately, as should any failing READ(10) commands (provided the preceding READ(10) command succeeded, to avoid getting stuck in a loop). The patch also adds appropriate unusual_devs entries containing the new flag. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Sven Geggus <sven-usbst@geggus.net> Tested-by: Paul Hartman <paul.hartman+linux@gmail.com> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | usb/renesas_usbhs: free uep on removalSebastian Andrzej Siewior2011-06-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Can't find evidence that this is actually done. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | usb/s3c-hsudc: fix error pathSebastian Andrzej Siewior2011-06-061-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I doubt the clock is optional. In case it is it should not return with an error code because we leak everything. Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | usb/pxa25x_udc: cleanup the LUBBOCK err pathSebastian Andrzej Siewior2011-06-061-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | this is more backwords than it has to be. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | usb/mv_udc_core: fix compileSebastian Andrzej Siewior2011-06-061-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |drivers/usb/gadget/mv_udc_core.c:2108: error: label `error' used but not defined This seems to be broken since the initial commit. I changed this to a simple return. The other user is the probe code which lets ->probe() fail on error here. |drivers/usb/gadget/mv_udc_core.c:2107: warning: passing argument 1 of `dev_err' from incompatible pointer type |drivers/usb/gadget/mv_udc_core.c:2118: warning: initialization from incompatible pointer type |drivers/usb/gadget/mv_udc_core.c:2119: warning: initialization from incompatible pointer type |drivers/usb/gadget/mv_udc_core.c:2130: error: initializer element is not constant |drivers/usb/gadget/mv_udc_core.c:2130: error: (near initialization for `udc_driver.driver.pm') Cc: Chao Xie <chao.xie@marvell.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | usb: gadget: include <linux/prefetch.h> to fix compiling errorBryan Wu2011-06-065-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/usb/gadget/at91_udc.c: In function 'write_fifo': drivers/usb/gadget/at91_udc.c:421:2: error: implicit declaration of function 'prefetch' make[3]: *** [drivers/usb/gadget/at91_udc.o] Error 1 make[2]: *** [drivers/usb/gadget] Error 2 make[2]: *** Waiting for unfinished jobs.... Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | USB: s3c-hsotg: Tone down debuggingMark Brown2011-06-061-10/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the s3c-hsotg driver is extremely chatty, producing voluminous with large register dumps even in default operation. Tone this down so we're not chatty unless DEBUG is defined. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | usb: remove bad dput after dentry_unhashSage Weil2011-06-061-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 64252c75a (vfs: remove dget() from dentry_unhash()) removed the useless dget from dentry_unhash but didn't fix up this caller in the usb code. There used to be exactly one dput per dentry_unhash call; now there are none. Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | USB: core: Tolerate protocol stall during hub and port status readLibor Pechacek2011-06-061-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Protocol stall should not be fatal while reading port or hub status as it is transient state. Currently hub EP0 STALL during port status read results in failed device enumeration. This has been observed with ST-Ericsson (formerly Philips) USB 2.0 Hub (04cc:1521) after connecting keyboard. Signed-off-by: Libor Pechacek <lpechacek@suse.cz> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | musb: fix prefetch build failureMike Frysinger2011-06-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After the prefetch/list.h restructure, drivers need to explicitly include linux/prefetch.h in order to use the prefetch() function. Otherwise, the current driver fails to build: drivers/usb/musb/musb_core.c: In function 'musb_write_fifo': drivers/usb/musb/musb_core.c:219: error: implicit declaration of function 'prefetch' make[3]: *** [drivers/usb/musb/musb_core.o] Error 1 Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | USB: cdc-acm: Adding second ACM channel support for Nokia E7 and C7Toby Gray2011-06-061-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the Nokia E7 and C7 to the list of devices in cdc-acm, allowing the secondary ACM channel on the device to be exposed. Without this patch the ACM driver won't claim this secondary channel as it's marked as having a vendor-specific protocol. Signed-off-by: Toby Gray <toby.gray@realvnc.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | usb-gadget: unlock data->lock mutex on error path in ep_write()Alexey Khoroshilov2011-06-061-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ep_write() acquires data->lock mutex in get_ready_ep() and releases it on all paths except for one: when usb_endpoint_xfer_isoc() failed. The patch adds mutex_unlock(&data->lock) at that path. It is similar to commit 00cc7a5 ("usb-gadget: unlock data->lock mutex on error path in ep_read()"), it was not fixed at that time by accident. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | USB: option Add blacklist for ZTE K3765-Z (19d2:2002)Torsten Hilbrich2011-06-061-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The funtion option_send_status times out when sending USB messages to the interfaces 0, 1, and 2 of this UMTS stick. This results in a 5s timeout in the function causing other tty operations to feel very sluggish. This patch adds a blacklist entry for these 3 interfaces on the ZTE K3765-Z device. I was also able to reproduce the problem with v2.6.38 and v2.6.39. This is very similar to a problem fixed in commit 7a89e4cb9cdaba92f5fbc509945cf4e3c48db4e2 Author: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Date: Wed Mar 9 09:19:48 2011 +0000 USB: serial: option: Apply OPTION_BLACKLIST_SENDSETUP also for ZTE MF626 Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | option: add Prolink PH300 modem IDsDan Williams2011-06-061-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simple ID addition. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | option: add Alcatel X200 to sendsetup blacklistDan Williams2011-06-061-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This modem really wants sendsetup blacklisted for interfaces 0 and 1, otherwise the kernel hardlocks for about 10 seconds while waiting for the modem's firmware to respond, which it of course doesn't do. A slight complication here is that TCT (who owns the Alcatel brand) used the same USB IDs for the X200 as the X060s despite the devices having completely different firmware and AT command sets, so we end up adding the X060s to the blacklist at the same time. PSA to OEMs: don't use the same USB IDs for different devices. Really. It makes your kittens cry. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | option: add Zoom 4597 modem USB IDsDan Williams2011-06-061-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Uses Longcheer-based firmware and AT command set. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | Merge branch 'for-usb-linus' of ↵Greg Kroah-Hartman2011-06-066-11/+51
| |\ \ \ | | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus * 'for-usb-linus' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci: USB: xhci - fix interval calculation for FS isoc endpoints xhci: Disable MSI for some Fresco Logic hosts. xhci: Do not issue device reset when device is not setup xhci: Add defines for hardcoded slot states xhci: Bigendian fix for xhci_check_bandwidth() xhci: Bigendian fix for skip_isoc_td()
| | * | USB: xhci - fix interval calculation for FS isoc endpointsDmitry Torokhov2011-06-051-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Full-speed isoc endpoints specify interval in exponent based form in frames, not microframes, so we need to adjust accordingly. NEC xHCI host controllers will return an error code of 0x11 if a full speed isochronous endpoint is added with the Interval field set to something less than 3 (2^3 = 8 microframes, or one frame). It is impossible for a full speed device to have an interval smaller than one frame. This was always an issue in the xHCI driver, but commit dfa49c4ad120a784ef1ff0717168aa79f55a483a "USB: xhci - fix math in xhci_get_endpoint_interval()" removed the clamping of the minimum value in the Interval field, which revealed this bug. This needs to be backported to stable kernels back to 2.6.31. Reported-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org
| | * | xhci: Disable MSI for some Fresco Logic hosts.Sarah Sharp2011-06-023-2/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some Fresco Logic hosts, including those found in the AUAU N533V laptop, advertise MSI, but fail to actually generate MSI interrupts. Add a new xHCI quirk to skip MSI enabling for the Fresco Logic host controllers. Fresco Logic confirms that all chips with PCI vendor ID 0x1b73 and device ID 0x1000, regardless of PCI revision ID, do not support MSI. This should be backported to stable kernels as far back as 2.6.36, which was the first kernel to support MSI on xHCI hosts. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Sergey Galanov <sergey.e.galanov@gmail.com> Cc: stable@kernel.org
| | * | xhci: Do not issue device reset when device is not setupMaarten Lankhorst2011-06-021-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xHCI controllers respond to a Reset Device command when the Slot is in the Enabled/Disabled state by returning an error. This is fine on other host controllers, but the Etron xHCI host controller returns a vendor-specific error code that the xHCI driver doesn't understand. The xHCI driver then gives up on device enumeration. Instead of issuing a command that will fail, just return. This fixes the issue with the xhci driver not working on ASRock P67 Pro/Extreme boards. This should be backported to stable kernels as far back as 2.6.34. Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org
| | * | xhci: Add defines for hardcoded slot statesMaarten Lankhorst2011-06-022-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This needs to be added to the stable trees back to 2.6.34 to support an upcoming bug fix. Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org
| | * | xhci: Bigendian fix for xhci_check_bandwidth()Matt Evans2011-06-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 834cb0fc4712a3b21c6b8c5cb55bd13607191311 "xhci: Fix memory leak bug when dropping endpoints" added a small endian bug. This patch fixes xhci_check_bandwidth() to read add/drop_flags LE. Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| | * | xhci: Bigendian fix for skip_isoc_td()Matt Evans2011-06-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 926008c9386dde09b015753b6681c502177baa30 "USB: xhci: simplify logic of skipping missed isoc TDs" added a small endian bug. This patch fixes skip_isoc_td() to read the DMA pointer correctly. Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
* | | | Merge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2011-06-082-2/+2
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | * 'spi/merge' of git://git.secretlab.ca/git/linux-2.6: spi/rtc-m41t93: Use spi_get_drvdata() for SPI devices spi/omap2: fix uninitialized variable
| * | | | spi/rtc-m41t93: Use spi_get_drvdata() for SPI devicesGeert Uytterhoeven2011-06-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One new offender detected by the recently increased type checking in platform_get_drvdata(): drivers/rtc/rtc-m41t93.c: In function ‘m41t93_remove’: drivers/rtc/rtc-m41t93.c:192: warning: passing argument 1 of ‘platform_get_drvdata’ from incompatible pointer type Use spi_get_drvdata() instead of platform_get_drvdata(), cfr. commit 42fea15d6dc410e62dac6a764142045280624a5b ("spi/rtc-{ds1390,ds3234,m41t94}: Use spi_get_drvdata() for SPI devices") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * | | | spi/omap2: fix uninitialized variableGovindraj.R2011-06-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fixes below compilation warning. The variable doesn't actual ever get used uninitialized, but that's no reason to be sloppy. drivers/spi/omap2_mcspi.c: In function 'omap2_mcspi_txrx_dma': drivers/spi/omap2_mcspi.c:301: warning: 'elements' may be used uninitialized in this function Signed-off-by: Govindraj.R <govindraj.raja@ti.com> [grant.likely: amended description] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds2011-06-083-5/+6
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: trivial: add space in fsc error message cifs: silence printk when establishing first session on socket CIFS ACL support needs CONFIG_KEYS, so depend on it possible memory corruption in cifs_parse_mount_options() cifs: make CIFS depend on CRYPTO_ECB cifs: fix the kernel release version in the default security warning message
| * | | | | cifs: trivial: add space in fsc error messageJeff Layton2011-06-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * | | | | cifs: silence printk when establishing first session on socketJeff Layton2011-06-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When signing is enabled, the first session that's established on a socket will cause a printk like this to pop: CIFS VFS: Unexpected SMB signature This is because the key exchange hasn't happened yet, so the signature field is bogus. Don't try to check the signature on the socket until the first session has been established. Also, eliminate the specific check for SMB_COM_NEGOTIATE since this check covers that case too. Cc: stable@kernel.org Cc: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * | | | | CIFS ACL support needs CONFIG_KEYS, so depend on itDarren Salt2011-06-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Build fails if CONFIG_KEYS is not selected. Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * | | | | possible memory corruption in cifs_parse_mount_options()Vasily Averin2011-06-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | error path after mountdata check frees uninitialized mountdata_copy Signed-off-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * | | | | cifs: make CIFS depend on CRYPTO_ECBSuresh Jayaraman2011-06-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_CRYPTO_ECB is not set, trying to mount a CIFS share with NTLM security resulted in mount failure with the following error: "CIFS VFS: could not allocate des crypto API" Seems like a leftover from commit 43988d7. Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> CC: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * | | | | cifs: fix the kernel release version in the default security warning messageSuresh Jayaraman2011-06-031-1/+1
| |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When ntlm security mechanim is used, the message that warns about the upgrade to ntlmv2 got the kernel release version wrong (Blame it on Linus :). Fix it. Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* | | | | Merge branch 'stable/bug.fixes' of ↵Linus Torvalds2011-06-082-15/+15
|\ \ \ \ \ | |_|_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: off by one errors in multicalls.c xen: use the trigger info we already have to choose the irq handler
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-25 09:40:34 +0000