summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/qcom-apq8064.dtsi
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: qcom: Update coresight bindings for hardware portsSuzuki K Poulose2018-09-301-31/+40
| | | | | | | | | | Switch to the new hardware port bindings for coresight Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* ARM: dts: qcom-apq8064: use correct pci address for address translationNiklas Cassel2018-05-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For PCI, the second and third cell in ranges specifies the upper and lower target address for address translation. This target address will be used to program the internal address translation unit (iATU). The current device tree configuration will program the iATU to translate CPU accesses to 0x08000000 to PCI address 0x0 (with TLP type MEM). The device tree configuration also specifies that CPU acesses to 0x0fe00000 will be translated to PCI address 0x0 (with TLP type I/O). We cannot have both I/O space and memory space at PCI address 0x0. The PCI code already uses the CPU address when assigning addresses to memory BARs, so for memory space the PCI address should be the same as the CPU address. This also matches how all other device trees using snps,dw-pcie are configured. The existing configuration appears to work, even if it is incorrect. For some reason the iATU doesn't obey the existing configuration, and doesn't translate CPU accesses from 0x08000000 to PCI address 0x0. The reason why the existing configuration works at all is probably because the default behavior, when there is no match, is to use the untranslated address. This happens to work for memory space, since it's a 1:1 mapping. However, instead of relying on this behavior, let's configure the iATU correctly. Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* ARM: dts: qcom-apq8064: fix gic_irq_domain_translate warningsThierry Escande2018-05-141-26/+26
| | | | | | | | | | | Remove the usage of IRQ_TYPE_NONE to fix loud warnings from patch (83a86fbb5b56b "irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE"). Signed-off-by: Thierry Escande <thierry.escande@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* ARM: dts: qcom-apq8064: disable i2c by default at soc dtsiSrinivas Kandagatla2018-05-141-0/+4
| | | | | | | | | | | | | | | | | | | | This patch marks all the gsbi i2c node at soc level dtsi, so that kernel would not assume that its enabled and result in pin conflicts when gsbi is used for UART or SPI. Without this patch we see below pin conflict. apq8064-pinctrl 800000.pinctrl: pin GPIO_20 already requested by 12450000.serial; cannot claim for 12460000.i2c apq8064-pinctrl 800000.pinctrl: pin-20 (12460000.i2c) status -22 apq8064-pinctrl 800000.pinctrl: could not request pin 20 (GPIO_20) from group gpio20 on device 800000.pinctrl i2c_qup 12460000.i2c: Error applying setting, reverse things back i2c_qup: probe of 12460000.i2c failed with error -22 Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* ARM: dts: add XOADC and IIO HWMON to APQ8064Linus Walleij2018-03-081-0/+63
| | | | | | | | | | | | | | | | | | | | | | This adds the PM8921 XOADC node to the PM8921 PMIC node, defines the channels and further also define an IIO HWMON node for the channels that are used for housekeeping of voltages and die temperature for the PMIC chip die. Tested on the Nexus 7 tablet: lsiio Device 000: PM8921-XOADC cd /sys/bus/iio/devices/iio:device0 cat in_voltage10_input 616461 (0.625V reference voltage) cat in_voltage11_input (1.25V reference voltage) cat temp1_input 35852 (die temperature) Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* Merge tag 'armsoc-dt' of ↵Linus Torvalds2017-11-161-1/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM device-tree updates from Arnd Bergmann: "We add device tree files for a couple of additional SoCs in various areas: Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for networking, Amlogic A113D for audio, and Renesas R-Car V3M for automotive. As usual, lots of new boards get added based on those and other SoCs: - Actions S500 based CubieBoard6 single-board computer - Amlogic Meson-AXG A113D based development board - Amlogic S912 based Khadas VIM2 single-board computer - Amlogic S912 based Tronsmart Vega S96 set-top-box - Allwinner H5 based NanoPi NEO Plus2 single-board computer - Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers - Allwinner A83T based TBS A711 Tablet - Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8 - Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500 wireless access points and routers - NXP i.MX51 based Zodiac Inflight Innovations RDU1 board - NXP i.MX53 based GE Healthcare PPD biometric monitor - NXP i.MX6 based Pistachio single-board computer - NXP i.MX6 based Vining-2000 automotive diagnostic interface - NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants - Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone - Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet - Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA - Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board - Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards - Renasas r8a7745 based iWave G22D-SODIMM SoM - Rockchip rk3288 based Amarula Vyasa single-board computer - Samsung Exynos5800 based Odroid HC1 single-board computer For existing SoC support, there was a lot of ongoing work, as usual most of that concentrated on the Renesas, Rockchip, OMAP, i.MX, Amlogic and Allwinner platforms, but others were also active. Rob Herring and many others worked on reducing the number of issues that the latest version of 'dtc' now warns about. Unfortunately there is still a lot left to do. A rework of the ARM foundation model introduced several new files for common variations of the model" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits) arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3 dt-bindings: bus: Add documentation for the Technologic Systems NBUS arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock ARM: dts: owl-s500: Add CubieBoard6 dt-bindings: arm: actions: Add CubieBoard6 ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock ARM: dts: owl-s500: Set power domains for CPU2 and CPU3 arm: dts: mt7623: remove unused compatible string for pio node arm: dts: mt7623: update usb related nodes arm: dts: mt7623: update crypto node ARM: dts: sun8i: a711: Enable USB OTG ARM: dts: sun8i: a711: Add regulator support ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1 ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1 ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes ARM: dts: sunxi: Add dtsi for AXP81x PMIC arm64: dts: allwinner: H5: Restore EMAC changes ...
| * ARM: dts: qcom-apq8064: disable gsbi6 i2c by default at soc dtsiSrinivas Kandagatla2017-10-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch marks gsbi i2c node at soc level dtsi, so that kernel would not assume that its enabled and result in pin conflicts on some boards like IFC6410 which do use these pins for uart. Without this patch we see below pin conflict: apq8064-pinctrl 800000.pinctrl: pin GPIO_16 already requested by 16540000.serial; cannot claim for 16580000.i2c apq8064-pinctrl 800000.pinctrl: pin-16 (16580000.i2c) status -22 apq8064-pinctrl 800000.pinctrl: could not request pin 16 (GPIO_16) from group gpio16 on device 800000.pinctrl i2c_qup 16580000.i2c: Error applying setting, reverse things back i2c_qup: probe of 16580000.i2c failed with error -22 Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
| * ARM: dts: qcom-apq8064: Fix dsi and hdmi phy cellsAndy Gross2017-10-111-1/+3
| | | | | | | | | | | | | | | | This patch adds the necessary #phy-cells property to the DSI and HDMI phys. Signed-off-by: Andy Gross <andy.gross@linaro.org> Reviewed-by: Archit Taneja <architt@codeaurora.org>
* | License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ARM: dts: qcom-apq8064: Collapse usb support into one nodeStephen Boyd2017-05-261-69/+85
| | | | | | | | | | | | | | | | | | We currently have three device nodes for the same USB hardware block, as evident by the reuse of the same reg address multiple times. Now that the chipidea driver fully supports OTG with the MSM wrapper we can collapse the three nodes into one USB device node, reflecting the true nature of the hardware. Since we're here, we also mark the irq trigger flags correctly, as IRQ_TYPE_LEVEL_HIGH instead of IRQ_TYPE_NONE. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Nicolas Dechesne <nicolas.dechesne@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* Merge tag 'qcom-dts-for-4.11' of ↵Olof Johansson2017-01-291-5/+282
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Qualcomm Device Tree Changes for v4.11 * Add Coresight components for APQ8064 * Fixup PM8058 nodes * Add APQ8060 gyro and accel support * Enable SD600 HDMI support * Add RIVA supprort for Sony Yuga and SD600 * Add PM8821 support * Add MSM8974 ADSP, USB gadget, SMD, and SMP2P support * Fix IPQ8064 clock frequencies * tag 'qcom-dts-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: dts: qcom: Add apq8064 CoreSight components ARM: dts: Add gyro and accel to APQ8060 Dragonboard ARM: dts: reference PM8058 as IRQ parent ARM: dts: rename MSM8660/APQ8060 pmicintc to pm8058 ARM: dts: sd-600eval: enable 1.8v regulator on LS expansion ARM: dts: sd-600eval: add hdmi support ARM: dts: move hdmi pinctrl out of board file. ARM: dts: qcom: sd600eval: Enable riva-pil ARM: dts: qcom: sd600-eval: pm8921_s2 regulator properties ARM: dts: qcom: apq8064-sony-yuga: Enable riva-pil ARM: dts: qcom: apq8064: Add riva-pil node ARM: dts: apq8064: add support to pm8821 arm: dts: qcom: Fix ipq board clock rates ARM: dts: msm8974: Remove "unused" reserved region ARM: dts: msm8974: Add ADSP PIL node ARM: dts: msm8974: Add ADSP smp2p and smd nodes ARM: dts: qcom: msm8974: Add USB gadget nodes Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: dts: qcom: Add apq8064 CoreSight componentsIvan T. Ivanov2017-01-131-4/+186
| | | | | | | | | | | | | | | | | | | | Add initial set of CoreSight components found on Qualcomm apq8064 based platforms, including the IFC6410 board. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
| * ARM: dts: move hdmi pinctrl out of board file.Srinivas Kandagatla2017-01-131-0/+2
| | | | | | | | | | | | | | | | | | | | This patch moves hdmi pinctrl defination from board file to soc level pinctrl file. If not this pinctrl setup will be duplicated across all the apq8064 based board files. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
| * ARM: dts: qcom: apq8064: Add riva-pil nodeBjorn Andersson2017-01-131-1/+68
| | | | | | | | | | | | | | | | | | | | | | | | Add nodes for the Riva PIL, IRIS RF module, BT and WiFI services exposed by the Riva firmware and the related memory reserve. Also provides pinctrl nodes for devices enabling the riva-pil. Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
| * ARM: dts: apq8064: add support to pm8821Srinivas Kandagatla2017-01-131-0/+27
| | | | | | | | | | | | Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* | ARM: dts: qcom: apq8064: Add missing scm clockBjorn Andersson2017-01-021-0/+4
|/ | | | | | | | As per the device tree binding the apq8064 scm node requires the core clock to be specified, so add this. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* arm: dts: qcom: apq8064: Add dsi, gpu and iommu nodesJohn Stultz2016-11-181-0/+230
| | | | | | | | | | | | | | | | | | Adds the core gpu, and dsi nodes for the apq8064 needed to get graphics working on the nexus7 and other devices. These apply on top of Archit's patch set that enables HDMI for IFC6410 Feedback would be greatly appreciated! Cc: Archit Taneja <architt@codeaurora.org> Cc: vinay simha <vinaysimha@inforcecomputing.com> Cc: andy.gross@linaro.org Cc: robdclark@gmail.com Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* arm: dts: qcom: apq8064: Add display DT nodesArchit Taneja2016-11-181-0/+91
| | | | | | | | | | | | | | | | APQ8064 contains a MDP4 based display controller. It contains a HDMI, LVDS and 2 DSI outputs. Add display DT nodes for MDP4, HDMI TX and HDMI PHY. MDP4 based display blocks have a flat device hierarchy. Nodes for other outputs will be added later. Cc: devicetree@vger.kernel.org Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* arm: dts: apq8064: Add thermal zones, tsens and qfprom nodesRajendra Nayak2016-09-021-0/+103
| | | | | | | | | | | | TSENS is part of GCC, hence add TSENS properties as part of GCC node. Also add thermal zones and qfprom nodes. Update GCC bindings doc to mention the possibility of optional TSENS properties that can be part of GCC node. Acked-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* ARM: dts: MSM8064 remove flags from SPMI/MPP IRQsLinus Walleij2016-08-231-19/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Qualcomm PMIC GPIO and MPP lines are problematic: the are fetched from the main MFD driver with platform_get_irq() which means that at this point they will all be assigned the flags set up for the interrupts in the device tree. That is problematic since these are flagged as rising edge and an this point the interrupt descriptor is assigned a rising edge, while the only thing the GPIO/MPP drivers really do is issue irq_get_irqchip_state() on the line to read it out and to provide a .to_irq() helper for *other* IRQ consumers. If another device tree node tries to flag the same IRQ for use as something else than rising edge, the kernel irqdomain core will protest like this: type mismatch, failed to map hwirq-NN for <FOO>! Which is what happens when the device tree defines two contradictory flags for the same interrupt line. To work around this and alleviate the problem, assign 0 as flag for the interrupts taken by the PM GPIO and MPP drivers. This will lead to the flag being unset, and a second consumer requesting rising, falling, both or level interrupts will be respected. This is what the qcom-pm*.dtsi files already do. Switched to using the symbolic name IRQ_TYPE_NONE so that we get this more readable. Cc: stable@vger.kernel.org Fixes: bce360469676 ("ARM: dts: apq8064: add pm8921 mpp support") Fixes: 874443fe9e33 ("ARM: dts: apq8064: Add pm8921 mfd and its gpio node") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Björn Andersson <bjorn.andersson@linaro.org> Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Andy Gross <andy.gross@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* device-tree: aqp8064.dtsi: Remove usb phy dr_mode = "host"John Stultz2016-08-231-1/+0
| | | | | | | | | | | | | | | | | | | Most 8064 devices have micro-usb ports for phy1, so setting the dr_mode to host here seems incorrect. Leaving it unspecified should default to otg, and then any boards that wish to specify something else, can override it in their dts file. Cc: Rob Herring <robh+dt@kernel.org> Cc: Andy Gross <agross@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* Merge tag 'armsoc-dt' of ↵Linus Torvalds2016-08-011-1/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "Device tree contents continue to be the largest branches we submit. This time around, some of the contents worth pointing out is: New SoC platforms: - Freescale i.MX 7Solo - Broadcom BCM23550 - Cirrus Logic EP7209 and EP7211 (clps711x platforms)_ - Hisilicon HI3519 - Renesas R8A7792 Some of the other delta that is sticking out, line-count wise: - Exynos moves of IP blocks under an SoC bus, which causes a large delta due to indentation changes - a new Tegra K1 board: Apalis - a bunch of small updates to many Allwinner platforms; new hardware support, some cleanup, etc" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (426 commits) ARM: dts: sun8i: Add dts file for inet86dz board ARM: dts: sun8i: Add dts file for Polaroid MID2407PXE03 tablet ARM: dts: sun8i: Use sun8i-reference-design-tablet for ga10h dts ARM: dts: sun8i: Use sun8i-reference-design-tablet for polaroid mid2809pxe04 ARM: dts: sun8i: reference-design-tablet: Add drivevbus-supply ARM: dts: Copy sun8i-q8-common.dtsi sun8i-reference-design-tablet.dtsi ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for utoo p66 dts ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for dit4350 dts ARM: dts: sun5i: reference-design-tablet: Remove mention of q8 ARM: dts: sun5i: reference-design-tablet: Set lradc vref to avcc ARM: dts: sun5i: Rename sun5i-q8-common.dtsi sun5i-reference-design-tablet.dtsi ARM: dts: sun5i: Move q8 display bits to sun5i-a13-q8-tablet.dts ARM: dts: sunxi: Rename sunxi-q8-common.dtsi sunxi-reference-design-tablet.dtsi ARM: dts: at91: Don't build unnecessary dtbs ARM: dts: at91: sama5d3x: separate motherboard gmac and emac definitions ARM: dts: at91: at91sam9g25ek: fix isi endpoint node ARM: dts: at91: move isi definition to at91sam9g25ek ARM: dts: at91: fix i2c-gpio node name ARM: dts: at91: vinco: fix regulator name ARM: dts: at91: ariag25 : fix onewire node ...
| * arm: dts: qcom: Update smem state cells usageAndy Gross2016-06-271-1/+1
| | | | | | | | | | | | | | This patch updates the qcom,state-cells to qcom,smem-state-cells to match recent changes to the binding. Signed-off-by: Andy Gross <andy.gross@linaro.org>
| * ARM: dts: apq8064: move sdcc1 pinctrl nodes to soc fileSrinivas Kandagatla2016-06-271-0/+2
| | | | | | | | | | | | | | | | This patch moves out the sdcc1 pinctrl nodes out of board files to soc file, so that it will be duplicated in other board files. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
| * dts: qcom: apq8064: Add SCM firmware nodeAndy Gross2016-06-111-0/+6
| | | | | | | | | | | | | | This patch adds the firmware node for the APQ8064 Signed-off-by: Andy Gross <andy.gross@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
* | watchdog: qcom: update device tree bindingsMatthew McClintock2016-07-171-1/+2
|/ | | | | | | | | | | | Update the compatible string to align with driver and also add SoC specific string to DTS. CC: linux-watchdog@vger.kernel.org Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> Signed-off-by: Thomas Pedersen <twp@codeaurora.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* Merge tag 'armsoc-dt' of ↵Linus Torvalds2016-05-181-6/+129
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "These are all the updates to device tree files for 32-bit platforms, which as usual makes up the bulk of the ARM SoC changes: 462 non-merge changesets, 450 files changed, 23340 insertions, 5216 deletions. The three platforms that are added with the "soc" branch are here as well, and we add some related machine files: - For Aspeed AST2400/AST2500, we get the evaluation platform and the Tyan Palmetto POWER8 mainboard that uses the AST2400 BMC - For Oxnas 810SE, the Western Digital "My Book World Edition" is added as the only platform at the moment. - For ARM MPS2, the AN385 (Cortex-M3) and AN399 (Cortex-M7) are supported On the ARM Realview development platform, we now support all machines with device tree, previously only the board files were supported, which in turn will likely be removed soon. Qualcomm IPQ4019 is the second generation ARM based "Internet Processor", following the IPQ806x that is used in many high-end WiFi routers. This one integrates two ath10k wifi radios that were previously on separate chips. Other boards that got added for existing chips are: Ti OMAP family: - Amazon Kindle Fire, first generation, tablet and ebook reader - OnRISC Baltos iR 2110 and 3220 embedded industrial PCs - TI AM5728 IDK, TI AM3359 ICE-V2, and TI DRA722 Rev C EVM development systems Samsung EXYNOS platform: - Samsung ARTIK5 evaluation board, see https://www.artik.io/modules/overview/artik-5/ NXP i.MX platforms: - Ka-Ro electronics TX6S-8034, TX6S-8035, TX6U-8033, TX6U-81xx, TX6Q-1036, TX6Q-1110/-1130, TXUL-0010 and TXUL-0011 industrial SoM modules - Embest MarS Board i.MX6Dual DIY platform - Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX and SoloX Nitrogen6sx embedded boards - Technexion Pico i.MX6UL compute module - ZII VF610 Development Board Marvell embedded (mvebu, orion, kirkwood) platforms: - Linksys Viper (E4200v2 / EA4500) WiFi router - Buffalo Kurobox Pro NAS Qualcomm Snapdragon: - Arrow DragonBoard 600c (96boards) with APQ8064 Snapdragon 600 Rockchips platform: - mqmaker MiQi single-board computer Altera SoCFPGA: - samtec VIN|ING 1000 vehicle communication interface Allwinner Sunxi platforms: - Dserve DSRV9703C tablet - Difrnce DIT4350 tablet - Colorfly E708 Q1 tablet - Polaroid MID2809PXE04 tablet - Olimex A20 OLinuXino LIME2 single board computer - Xunlong Orange Pi 2, Orange Pi One, and Orange Pi PC single board computers Across many platforms, bug fixes went in to address warnings that dtc now emits with 'make dtbs W=1'. Further changes for device enablement went into Ti OMAP, bcm283x (Raspberry Pi), bcm47xx (wifi router), Ti Davinci, Samsung EXYNOS, Marvell mvebu/kirkwood/orion, NXP i.MX/Vybrid NXP LPC18xx, NXP LPC32xx, Renesas shmobile/r-mobile/r-car, Rockchips rk3xxx, ST Ux500, ST STi, Atmel AT91/SAMA5, Altera SoCFPGA, Allwinner Sunxi, Sigma Designs Tango, NVIDIA Tegra, Socionext Uniphier and ARM Versatile Express" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (458 commits) ARM: dts: tango4: Import watchdog node ARM: dts: tango4: Update cpus node for cpufreq ARM: dts: tango4: Update DT to match clk driver ARM: dts: tango4: Initial thermal support arm/dst: Add Aspeed ast2500 device tree arm/dts: Add Aspeed ast2400 device tree ARM: sun7i: dt: Add pll3 and pll7 clocks ARM: dts: sunxi: Add a olinuxino-lime2-emmc ARM: dts: at91: sama5d4: add trng node ARM: dts: at91: sama5d3: add trng node ARM: dts: at91: sama5d2: add trng node ARM: dts: at91: at91sam9g45 family: reduce the trng register map size ARM: sun4i: dt: Add pll3 and pll7 clocks ARM: sun5i: chip: Enable the TV Encoder ARM: sun5i: r8: Add display blocks to the DTSI ARM: sun5i: a13: Add display and TCON clocks ARM: dts: ux500: configure the accelerometers open drain ARM: mx5: dts: Enable USB OTG on M53EVK ARM: dts: imx6ul-14x14-evk: Add audio support ARM: dts: imx6qdl: Remove unneeded unit-addresses ...
| * ARM: dts: apq8064: add gsbi7 i2c supportSrinivas Kandagatla2016-04-201-0/+13
| | | | | | | | | | | | | | | | This patch adds support to gsbi7 i2c which is used in some of the new boards. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
| * ARM: dts: apq8064: add support to gsbi1 uartSrinivas Kandagatla2016-04-201-0/+10
| | | | | | | | | | | | | | This patch adds support to gsbi1 uart and its pinctrls nodes. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
| * ARM: dts: apq8064: fix the pinctrls for i2c and spiSrinivas Kandagatla2016-04-201-6/+12
| | | | | | | | | | | | | | | | | | | | | | This patch fixes pinctrls for spi and i2c nodes whose default and sleep states are together, which is incorrect. Without this patch i2c/spi would not be functional. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
| * ARM: dts: qcom: apq8064: Add smd node and all edgesBjorn Andersson2016-04-201-0/+40
| | | | | | | | | | Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
| * ARM: dts: qcom: apq8064: Add complete smsm nodeBjorn Andersson2016-04-201-0/+49
| | | | | | | | | | Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
| * ARM: dts: qcom: apq8064: Add syscon for sic-non-secureBjorn Andersson2016-04-201-0/+5
| | | | | | | | | | Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* | ARM: dts: apq8064: add ahci ports-implemented maskSrinivas Kandagatla2016-04-011-1/+2
|/ | | | | | | | | | | | | This patch adds new ports-implemented mask, which is required to get achi working on the mainline. Without this patch value read from PORTS_IMPL register which is zero would not enable any ports for software to use. Fixes: 566d1827df2e ("libata: disable forced PORTS_IMPL for >= AHCI 1.3") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Tejun Heo <tj@kernel.org>
* ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus"Masahiro Yamada2016-03-121-1/+1
| | | | | | | | | | | | | | | | The compatible string "simple-bus" is well defined in ePAPR, while I see no documentation for the "arm,amba-bus" arnywhere in ePAPR or Documentation/devicetree/. DT is also used by other projects than Linux kernel. It is not a good idea to rely on such an unofficial binding. This commit - replaces "arm,amba-bus" with "simple-bus" - drops "arm,amba-bus" where it is used along with "simple-bus" Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* ARM: dts: apq8064: add i2c6 device node.Srinivas Kandagatla2016-02-261-0/+11
| | | | | | | | This patch adds i2c6 device node and pinctrls required for IFC6410 on MIPI-CSI connector. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* ARM: dts: apq8064: add gsbi4 with i2c node.Srinivas Kandagatla2016-02-261-0/+23
| | | | | | | This patch adds gsbi4 and i2c node. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* ARM: dts: apq8064: add missing i2c2 pinctrl infoSrinivas Kandagatla2016-02-261-0/+2
| | | | | | | This patch adds missing i2c2 pinctrl information in i2c2 node. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* ARM: dts: apq8064: add spi5 device node.Srinivas Kandagatla2016-02-261-0/+14
| | | | | | | | This patch adds spi5 device node, spi5 is used on ifc6410 on the expansion connector. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* ARM: dts: apq8064: add i2c sleep pinctrl states.Srinivas Kandagatla2016-02-261-4/+4
| | | | | | | | | This patch adds missing i2c pinctrl sleep states. Also add 16mA drive strength to the pins so that we can detect wide range of i2c devices on the other side of level shifters. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* ARM: dts: apq8064: move pinctrls to dedicated dtsiSrinivas Kandagatla2016-02-261-56/+1
| | | | | | | | As there are more pinctrls to come, moving these to dedicated dtsi makes more sense. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* ARM: dts: qcom: fix i2c lables to be inline with othersSrinivas Kandagatla2016-02-261-3/+3
| | | | | | | | | This patch fixes i2c lables to be inline with serial labels. The reason to do this is that it would look odd if we add aliases in the board file along with serial. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* devicetree: qcom-apq8064.dtsi: Add i2c3 address-cells and size-cells valuesJohn Stultz2016-02-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | This adds address-cell and size-cell values to the i2c3 bus in the qcom-apq8064.dtsi, which is needed to describe devices on that bus. Cc: Rob Herring <robh+dt@kernel.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Andy Gross <agross@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Vinay Simha BN <simhavcs@gmail.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* arm: dts: qcom: apq8064: Add RPMCC DT nodeGeorgi Djakov2016-02-231-0/+5
| | | | | | | Add the RPM Clock Controller DT node. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* Merge tag 'pci-v4.5-changes' of ↵Linus Torvalds2016-01-211-0/+36
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v4.5 merge window: Enumeration: - Simplify config space size computation (Bjorn Helgaas) - Avoid iterating through ROM outside the resource window (Edward O'Callaghan) - Support PCIe devices with short cfg_size (Jason S. McMullan) - Add Netronome vendor and device IDs (Jason S. McMullan) - Limit config space size for Netronome NFP6000 family (Jason S. McMullan) - Add Netronome NFP4000 PF device ID (Simon Horman) - Limit config space size for Netronome NFP4000 (Simon Horman) - Print warnings for all invalid expansion ROM headers (Vladis Dronov) Resource management: - Fix minimum allocation address overwrite (Christoph Biedl) PCI device hotplug: - acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King) - pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck) - shpchp: Constify hpc_ops structure (Julia Lawall) - ibmphp: Remove unneeded NULL test (Julia Lawall) Power management: - Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski) Virtualization - Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander) MSI: - Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas) - Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko) - Initialize MSI capability for all architectures (Guilherme G. Piccoli) - Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang) ARM Versatile host bridge driver: - Remove unused pci_sys_data structures (Lorenzo Pieralisi) Broadcom iProc host bridge driver: - Hide CONFIG_PCIE_IPROC (Arnd Bergmann) - Do not use 0x in front of %pap (Dmitry V. Krivenok) - Update iProc PCIe device tree binding (Ray Jui) - Add PAXC interface support (Ray Jui) - Add iProc PCIe MSI device tree binding (Ray Jui) - Add iProc PCIe MSI support (Ray Jui) Freescale i.MX6 host bridge driver: - Use gpio_set_value_cansleep() (Fabio Estevam) - Add support for active-low reset GPIO (Petr Štetiar) HiSilicon host bridge driver: - Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni) Intel VMD host bridge driver: - Export irq_domain_set_info() for module use (Keith Busch) - x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch) - Use 32 bit PCI domain numbers (Keith Busch) - Add driver for Intel Volume Management Device (VMD) (Keith Busch) Qualcomm host bridge driver: - Document PCIe devicetree bindings (Stanimir Varbanov) - Add Qualcomm PCIe controller driver (Stanimir Varbanov) - dts: apq8064: add PCIe devicetree node (Stanimir Varbanov) - dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov) Renesas R-Car host bridge driver: - Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa) - Allow DT to override default window settings (Phil Edworthy) - Convert to DT resource parsing API (Phil Edworthy) - Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy) - Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy) - Add runtime PM support to pcie-rcar (Phil Edworthy) - Add Gen2 PHY setup to pcie-rcar (Phil Edworthy) - Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman) - Add gen2 fallback compatibility string for pcie-rcar (Simon Horman) Synopsys DesignWare host bridge driver: - Simplify control flow (Bjorn Helgaas) - Make config accessor override checking symmetric (Bjorn Helgaas) - Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov) Miscellaneous: - Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann) - Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas) - Fix all whitespace issues (Bogicevic Sasa) - x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang) - Use to_pci_dev() instead of open-coding it (Geliang Tang) - Use kobj_to_dev() instead of open-coding it (Geliang Tang) - Use list_for_each_entry() to simplify code (Geliang Tang) - Fix typos in <linux/msi.h> (Thomas Petazzoni) - x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)" * tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits) PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 PCI: Limit config space size for Netronome NFP4000 PCI: Add Netronome NFP4000 PF device ID x86/PCI: Add driver for Intel Volume Management Device (VMD) PCI/AER: Use 32 bit PCI domain numbers x86/PCI: Allow DMA ops specific to a PCI domain irqdomain: Export irq_domain_set_info() for module use PCI: host: Add of_pci_get_host_bridge_resources() stub genirq/MSI: Relax msi_domain_alloc() to support parentless MSI irqdomains PCI: rcar: Add Gen2 PHY setup to pcie-rcar PCI: rcar: Add runtime PM support to pcie-rcar PCI: designware: Make config accessor override checking symmetric PCI: ibmphp: Remove unneeded NULL test ARM: dts: ifc6410: enable PCIe DT node for this board ARM: dts: apq8064: add PCIe devicetree node PCI: hotplug: Use list_for_each_entry() to simplify code PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers PCI: Avoid iterating through memory outside the resource window PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot ...
| * ARM: dts: apq8064: add PCIe devicetree nodeStanimir Varbanov2016-01-111-0/+36
| | | | | | | | | | | | Add the PCIe DT node so that it can probe and be used. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | arm: dts: qcom: apq8064: Add fixed rate on-board oscillatorsGeorgi Djakov2015-12-151-0/+20
| | | | | | | | | | | | | | | | | | | | Currently the rates of the xo and sleep clocks are hard-coded in the GCC driver, but this is a board layout description that actually should be in the DT. Moving them into DT also allows us to insert the RPM controlled clocks between the DT and GCC clocks. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
* | arm: dts: qcom: Add generic PMIC gpio/MPP compat stringsStephen Boyd2015-12-081-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Add the generic compatible strings for the PMIC gpio and MPP modules found on qcom based PMICs. Cc: <devicetree@vger.kernel.org> Cc: "Ivan T. Ivanov" <iivanov@mm-sol.com> Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
* | ARM: dts: qcom: apq8064: Introduce gsbi5 and gsbi5 serial nodeBjorn Andersson2015-12-081-0/+22
| | | | | | | | | | Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
* | ARM: dts: qcom: apq8064: Declare all pm8921 regulatorsBjorn Andersson2015-12-081-0/+46
| | | | | | | | | | | | | | | | Consolidate all labeling of regulators into the core 8064 dtsi file to make them available from all other dts files. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-19 15:04:10 +0000