summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-berlin
Commit message (Collapse)AuthorAgeFilesLines
* ARM: berlin: switch to SPDX license identifierJisheng Zhang2018-05-243-12/+3
| | | | | | | Use the appropriate SPDX license identifier and drop the previous boilerplate license text. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
* arm: berlin: remove non-necessary flush_cache_all()Jisheng Zhang2018-05-241-1/+0
| | | | | | | | | I believe the flush_cache_all() after scu_enable() is to "Ensure that the data accessed by CPU0 before the SCU was initialised is visible to the other CPUs." as commented in scu_enable(). So here flush_cache_all() is a duplication, remove it. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
* ARM: berlin: extend BG2CD Kconfig entryAlexander Monakov2018-05-241-1/+5
| | | | | | | | | | | BG2CD SoC uses r3p0 Cortex-A9 MPCore single-CPU cluster. Autoselect pertinent errata, the SCU and the global timer, and allow use of the local timer on uniprocessor kernels. PL310 L2 cache controller has revision r3p2; no errata to select. Signed-off-by: Alexander Monakov <amonakov@ispras.ru> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
* ARM: 8646/1: mmu: decouple VECTORS_BASE from KconfigAfzal Mohammed2017-02-281-1/+2
| | | | | | | | | | | | | | | | | | | | For MMU configurations, VECTORS_BASE is always 0xffff0000, a macro definition will suffice. For no-MMU, exception base address is dynamically determined in subsequent patches. To preserve bisectability, now make the macro applicable for no-MMU scenario too. Thanks to 0-DAY kernel test infrastructure that found the bisectability issue. This macro will be restricted to MMU case upon dynamically determining exception base address for no-MMU. Once exception address is handled dynamically for no-MMU, VECTORS_BASE can be removed from Kconfig. Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbolFlorian Fainelli2017-02-281-1/+1
| | | | | | | | | | | All low-level PM/SMP code using virt_to_phys() should actually use __pa_symbol() against kernel symbols. Update code where relevant to move away from virt_to_phys(). Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIBLinus Walleij2016-06-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | This replaces: - "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can now be selected directly. - "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB is now selectable by everyone, so we need not declare our intent to select it. When ordering the symbols the following rationale was used: if the selects were in alphabetical order, I moved select GPIOLIB to be in alphabetical order, but if the selects were not maintained in alphabetical order, I just replaced "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB". Cc: Michael Büsch <m@bues.ch> Cc: arm@kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
* cpufreq: berlin: Use generic platdev driverViresh Kumar2016-04-251-6/+0
| | | | | | | | | | The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform device now, reuse that and remove similar code from platform code. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ARM: use "depends on" for SoC configs instead of "if" after promptMasahiro Yamada2015-12-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many ARM sub-architectures use prompts followed by "if" conditional, but it is wrong. Please notice the difference between config ARCH_FOO bool "Foo SoCs" if ARCH_MULTI_V7 and config ARCH_FOO bool "Foo SoCs" depends on ARCH_MULTI_V7 These two are *not* equivalent! In the former statement, it is not ARCH_FOO, but its prompt that depends on ARCH_MULTI_V7. So, it is completely valid that ARCH_FOO is selected by another, but ARCH_MULTI_V7 is still disabled. As it is not unmet dependency, Kconfig never warns. This is probably not what you want. The former should be used only when you need to do so, and you really understand what you are doing. (In most cases, it should be wrong!) For enabling/disabling sub-architectures, the latter is always correct. As a good side effect, this commit fixes some entries over 80 columns (mach-imx, mach-integrator, mach-mbevu). [Arnd: I note that there is not really a bug here, according to the discussion that followed, but I can see value in being consistent and in making the lines shorter] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Jun Nie <jun.nie@linaro.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Krzysztof Halasa <khc@piap.pl> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* ARM: use const and __initconst for smp_operationsMasahiro Yamada2015-12-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | These smp_operations structures are not over-written, so add "const" qualifier and replace __initdata with __initconst. Also, add "static" where it is possible. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> # qcom part Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* arm: berlin: add CPU hotplug supportJisheng Zhang2015-10-151-0/+25
| | | | | | | | | | | Add cpu hotplug support for berlin SoCs such as BG2 and BG2Q. These SoC don't support power off cpu independently, but we also want cpu hotplug support in these SoCs. We achieve this goal by putting the dying CPU in WFI state after the coherency is disabled, then asserting the dying CPU reset bit to put the CPU in reset state. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
* arm: berlin: use non-self-cleared reset register to reset cpuJisheng Zhang2015-10-151-3/+10
| | | | | | | | | | | In Berlin SoCs, there are two kinds of cpu reset control registers: the first one's corresponding bits will be self-cleared after some cycles, while the second one's bits won't. Previously the first kind of reset control register is used, this patch uses the second kind one to prepare for the next hotplug commit. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
* ARM: berlin: register cpufreq-dtAntoine Tenart2015-09-211-0/+6
| | | | | | | The Berlin SoCs use cpufreq-dt for cpufreq. Register a platform device. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
* Merge tag 'armsoc-drivers' of ↵Linus Torvalds2015-06-261-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Kevin Hilman: "Some of these are for drivers/soc, where we're now putting SoC-specific drivers these days. Some are for other driver subsystems where we have received acks from the appropriate maintainers. Some highlights: - simple-mfd: document DT bindings and misc updates - migrate mach-berlin to simple-mfd for clock, pinctrl and reset - memory: support for Tegra132 SoC - memory: introduce tegra EMC driver for scaling memory frequency - misc. updates for ARM CCI and CCN busses" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: soc: sunxi: Introduce SoC driver to map SRAMs arm-cci: Add aliases for PMU events arm-cci: Add CCI-500 PMU support arm-cci: Sanitise CCI400 PMU driver specific code arm-cci: Abstract handling for CCI events arm-cci: Abstract out the PMU counter details arm-cci: Cleanup PMU driver code arm-cci: Do not enable CCI-400 PMU by default firmware: qcom: scm: Add HDCP Support ARM: berlin: add an ADC node for the BG2Q ARM: berlin: remove useless chip and system ctrl compatibles clk: berlin: drop direct of_iomap of nodes reg property ARM: berlin: move BG2Q clock node ARM: berlin: move BG2CD clock node ARM: berlin: move BG2 clock node clk: berlin: prepare simple-mfd conversion pinctrl: berlin: drop SoC stub provided regmap ARM: berlin: move pinctrl to simple-mfd nodes pinctrl: berlin: prepare to use regmap provided by syscon reset: berlin: drop arch_initcall initialization ...
| * ARM: berlin: select MFD_SYSCON by defaultAntoine Tenart2015-05-181-0/+1
| | | | | | | | | | | | | | | | | | The chip and system controller nodes handle sub-devices, such as the clock, pinctrl or reset controllers. The drivers handling them need a regmap provided by syscon. Select it by default when using a Berlin SoC. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
* | ARM: v7 setup function should invalidate L1 cacheRussell King2015-06-012-8/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All ARMv5 and older CPUs invalidate their caches in the early assembly setup function, prior to enabling the MMU. This is because the L1 cache should not contain any data relevant to the execution of the kernel at this point; all data should have been flushed out to memory. This requirement should also be true for ARMv6 and ARMv7 CPUs - indeed, these typically do not search their caches when caching is disabled (as it needs to be when the MMU is disabled) so this change should be safe. ARMv7 allows there to be CPUs which search their caches while caching is disabled, and it's permitted that the cache is uninitialised at boot; for these, the architecture reference manual requires that an implementation specific code sequence is used immediately after reset to ensure that the cache is placed into a sane state. Such functionality is definitely outside the remit of the Linux kernel, and must be done by the SoC's firmware before _any_ CPU gets to the Linux kernel. Changing the data cache clean+invalidate to a mere invalidate allows us to get rid of a lot of platform specific hacks around this issue for their secondary CPU bringup paths - some of which were buggy. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: berlin: do not select RESET_CONTROLLERAntoine Tenart2014-11-181-1/+0
| | | | | | | | RESET_CONTROLLER is meant to be user-selectable. To respect that, do not select it automatically when using ARCH_BERLIN. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
* ARM: Berlin: select the reset controllerAntoine Ténart2014-10-211-1/+3
| | | | | | | | The Marvell Berlin SoCs now has a reset controller. Add the needed configuration. While at it reorder Kconfigs alphabetically. Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
* Merge tag 'berlin-soc-3.17-1' of ↵Olof Johansson2014-07-074-1/+134
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.infradead.org/users/hesselba/linux-berlin into next/soc Merge "Berlin SoC changes for v3.17" from Sebastian Hesselbarth: - SMP support for BG2 and BG2Q * tag 'berlin-soc-3.17-1' of git://git.infradead.org/users/hesselba/linux-berlin: ARM: berlin: add SMP support Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: berlin: add SMP supportAntoine Ténart2014-06-164-1/+134
| | | | | | | | | | | | | | | | | | | | | | | | | | Adds SMP support for Berlin SoCs. Secondary CPUs are reset, then execute the instruction we put in the reset exception register, setting the pc at the address contained in the software reset address register, which is the physical address of the Berlin secondary startup. This implementation avoid using the pen lock mechanism. Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
* | ARM: use menuconfig for sub-arch menusRob Herring2014-06-171-5/+1
|/ | | | | | | | | | | | | The System Type menu is getting quite long with platforms and is inconsistent in handling of sub-arch specific options. Tidy up the menu by making platform options a menuconfig entry containing any platform specific config items. [arnd: change OMAP part according to suggestion from Tony Lindgren <tony@atomide.com>] Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into nextLinus Torvalds2014-06-051-11/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM updates from Russell King: - Major clean-up of the L2 cache support code. The existing mess was becoming rather unmaintainable through all the additions that others have done over time. This turns it into a much nicer structure, and implements a few performance improvements as well. - Clean up some of the CP15 control register tweaks for alignment support, moving some code and data into alignment.c - DMA properties for ARM, from Santosh and reviewed by DT people. This adds DT properties to specify bus translations we can't discover automatically, and to indicate whether devices are coherent. - Hibernation support for ARM - Make ftrace work with read-only text in modules - add suspend support for PJ4B CPUs - rework interrupt masking for undefined instruction handling, which allows us to enable interrupts earlier in the handling of these exceptions. - support for big endian page tables - fix stacktrace support to exclude stacktrace functions from the trace, and add save_stack_trace_regs() implementation so that kprobes can record stack traces. - Add support for the Cortex-A17 CPU. - Remove last vestiges of ARM710 support. - Removal of ARM "meminfo" structure, finally converting us solely to memblock to handle the early memory initialisation. * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (142 commits) ARM: ensure C page table setup code follows assembly code (part II) ARM: ensure C page table setup code follows assembly code ARM: consolidate last remaining open-coded alignment trap enable ARM: remove global cr_no_alignment ARM: remove CPU_CP15 conditional from alignment.c ARM: remove unused adjust_cr() function ARM: move "noalign" command line option to alignment.c ARM: provide common method to clear bits in CPU control register ARM: 8025/1: Get rid of meminfo ARM: 8060/1: mm: allow sub-architectures to override PCI I/O memory type ARM: 8066/1: correction for ARM patch 8031/2 ARM: 8049/1: ftrace/add save_stack_trace_regs() implementation ARM: 8065/1: remove last use of CONFIG_CPU_ARM710 ARM: 8062/1: Modify ldrt fixup handler to re-execute the userspace instruction ARM: 8047/1: rwsem: use asm-generic rwsem implementation ARM: l2c: trial at enabling some Cortex-A9 optimisations ARM: l2c: add warnings for stuff modifying aux_ctrl register values ARM: l2c: print a warning with L2C-310 caches if the cache size is modified ARM: l2c: remove old .set_debug method ARM: l2c: kill L2X0_AUX_CTRL_MASK before anyone else makes use of this ...
| * ARM: l2c: berlin: convert to generic l2c OF initialisationRussell King2014-05-301-11/+6
| | | | | | | | | | | | | | | | | | Remove the explicit call to l2x0_of_init(), converting to the generic infrastructure instead. We can remove the explicit machine init too as this becomes identical to the generic version. Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: l2c: remove platforms/SoCs setting early BRESPRussell King2014-05-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | Since we now automatically enable early BRESP in core L2C-310 code when we detect a Cortex-A9, we don't need platforms/SoCs to set this bit explicitly. Instead, they should seek to preserve the value of bit 30 in the auxiliary control register. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: berlin: add the pinctrl dependency for the Marvell Berlin SoCsAntoine Tenart2014-05-191-0/+4
| | | | | | | | | | Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
* | ARM: berlin: add the LIBGPIO as a dependency for the BG2QAntoine Tenart2014-05-191-0/+1
| | | | | | | | | | | | | | | | | | The BG2Q has GPIOs driven by the dwapb GPIO driver. Add the LIBGPIO as a dependency to be able to support them. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Reviewed-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
* | ARM: berlin: add MACH_BERLIN_BG2Q symbolAlexandre Belloni2014-05-191-0/+5
|/ | | | | | | | Now that we start supporting the Marvell Berlin BG2Q, add a symbol allowing to differentiate that SoC from the other SoCs of the Berlin family. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
* ARM: select HAVE_SMP for V7 multi-platformRob Herring2014-02-191-1/+0
| | | | | | | | | All V7 platforms can run SMP kernels, so make CONFIG_SMP visible for V7 multi-platform builds. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
* ARM: centralize common multi-platform kconfig optionsRob Herring2014-02-191-3/+0
| | | | | | | | | | | | Multi-platform requires various kconfig options to be selected, so platforms don't need to select them individually. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
* ARM: add initial support for Marvell Berlin SoCsSebastian Hesselbarth2013-12-133-0/+69
This adds initial support for the Marvell Berlin SoC family with Armada 1500 (88DE3100) and Armada 1500-mini (88DE3005) SoCs. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-30 11:02:48 +0000