summaryrefslogtreecommitdiffstats
path: root/crypto
Commit message (Collapse)AuthorAgeFilesLines
...
| * crypto: shash - remove pointless checks of shash_alg::{export,import}Eric Biggers2019-01-181-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | crypto_init_shash_ops_async() only gives the ahash tfm non-NULL ->export() and ->import() if the underlying shash alg has these non-NULL. This doesn't make sense because when an shash algorithm is registered, shash_prepare_alg() sets a default ->export() and ->import() if the implementor didn't provide them. And elsewhere it's assumed that all shash algs and ahash tfms have non-NULL ->export() and ->import(). Therefore, remove these unnecessary, always-true conditions. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: shash - require neither or both ->export() and ->import()Eric Biggers2019-01-181-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Prevent registering shash algorithms that implement ->export() but not ->import(), or ->import() but not ->export(). Such cases don't make sense and could confuse the check that shash_prepare_alg() does for just ->export(). I don't believe this affects any existing algorithms; this is just preventing future mistakes. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: aead - set CRYPTO_TFM_NEED_KEY if ->setkey() failsEric Biggers2019-01-181-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some algorithms have a ->setkey() method that is not atomic, in the sense that setting a key can fail after changes were already made to the tfm context. In this case, if a key was already set the tfm can end up in a state that corresponds to neither the old key nor the new key. For example, in gcm.c, if the kzalloc() fails due to lack of memory, then the CTR part of GCM will have the new key but GHASH will not. It's not feasible to make all ->setkey() methods atomic, especially ones that have to key multiple sub-tfms. Therefore, make the crypto API set CRYPTO_TFM_NEED_KEY if ->setkey() fails, to prevent the tfm from being used until a new key is set. [Cc stable mainly because when introducing the NEED_KEY flag I changed AF_ALG to rely on it; and unlike in-kernel crypto API users, AF_ALG previously didn't have this problem. So these "incompletely keyed" states became theoretically accessible via AF_ALG -- though, the opportunities for causing real mischief seem pretty limited.] Fixes: dc26c17f743a ("crypto: aead - prevent using AEADs without setting key") Cc: <stable@vger.kernel.org> # v4.16+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: skcipher - set CRYPTO_TFM_NEED_KEY if ->setkey() failsEric Biggers2019-01-181-9/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some algorithms have a ->setkey() method that is not atomic, in the sense that setting a key can fail after changes were already made to the tfm context. In this case, if a key was already set the tfm can end up in a state that corresponds to neither the old key nor the new key. For example, in lrw.c, if gf128mul_init_64k_bbe() fails due to lack of memory, then priv::table will be left NULL. After that, encryption with that tfm will cause a NULL pointer dereference. It's not feasible to make all ->setkey() methods atomic, especially ones that have to key multiple sub-tfms. Therefore, make the crypto API set CRYPTO_TFM_NEED_KEY if ->setkey() fails and the algorithm requires a key, to prevent the tfm from being used until a new key is set. [Cc stable mainly because when introducing the NEED_KEY flag I changed AF_ALG to rely on it; and unlike in-kernel crypto API users, AF_ALG previously didn't have this problem. So these "incompletely keyed" states became theoretically accessible via AF_ALG -- though, the opportunities for causing real mischief seem pretty limited.] Fixes: f8d33fac8480 ("crypto: skcipher - prevent using skciphers without setting key") Cc: <stable@vger.kernel.org> # v4.16+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: hash - set CRYPTO_TFM_NEED_KEY if ->setkey() failsEric Biggers2019-01-182-14/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some algorithms have a ->setkey() method that is not atomic, in the sense that setting a key can fail after changes were already made to the tfm context. In this case, if a key was already set the tfm can end up in a state that corresponds to neither the old key nor the new key. It's not feasible to make all ->setkey() methods atomic, especially ones that have to key multiple sub-tfms. Therefore, make the crypto API set CRYPTO_TFM_NEED_KEY if ->setkey() fails and the algorithm requires a key, to prevent the tfm from being used until a new key is set. Note: we can't set CRYPTO_TFM_NEED_KEY for OPTIONAL_KEY algorithms, so ->setkey() for those must nevertheless be atomic. That's fine for now since only the crc32 and crc32c algorithms set OPTIONAL_KEY, and it's not intended that OPTIONAL_KEY be used much. [Cc stable mainly because when introducing the NEED_KEY flag I changed AF_ALG to rely on it; and unlike in-kernel crypto API users, AF_ALG previously didn't have this problem. So these "incompletely keyed" states became theoretically accessible via AF_ALG -- though, the opportunities for causing real mischief seem pretty limited.] Fixes: 9fa68f620041 ("crypto: hash - prevent using keyed hashes without setting key") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: algapi - reject NULL crypto_spawn::instEric Biggers2019-01-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It took me a while to notice the bug where the adiantum template left crypto_spawn::inst == NULL, because this only caused problems in certain cases where algorithms are dynamically loaded/unloaded. More improvements are needed, but for now make crypto_init_spawn() reject this case and WARN(), so this type of bug will be noticed immediately in the future. Note: I checked all callers and the adiantum template was the only place that had this wrong. So this WARN shouldn't trigger anymore. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: algapi - remove crypto_alloc_instance()Eric Biggers2019-01-111-31/+2
| | | | | | | | | | | | | | | | | | | | | | Now that all "blkcipher" templates have been converted to "skcipher", crypto_alloc_instance() is no longer used. And it's not useful any longer as it creates an old-style weakly typed instance rather than a new-style strongly typed instance. So remove it, and now that the name is freed up rename crypto_alloc_instance2() to crypto_alloc_instance(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: null - convert ecb-cipher_null to skcipher APIEric Biggers2019-01-111-25/+32
| | | | | | | | | | | | | | | | Convert the "ecb-cipher_null" algorithm from the deprecated "blkcipher" API to the "skcipher" API. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: arc4 - convert to skcipher APIEric Biggers2019-01-111-38/+44
| | | | | | | | | | | | | | | | | | | | | | Convert the "ecb(arc4)" algorithm from the deprecated "blkcipher" API to the "skcipher" API. (Note that this is really a stream cipher and not a block cipher in ECB mode as the name implies, but that's a problem for another day...) Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: pcbc - convert to skcipher_alloc_instance_simple()Eric Biggers2019-01-111-114/+11
| | | | | | | | | | | | | | | | The PCBC template just wraps a single block cipher algorithm, so simplify it by converting it to use skcipher_alloc_instance_simple(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: pcbc - remove ability to wrap internal ciphersEric Biggers2019-01-111-7/+3
| | | | | | | | | | | | | | | | | | | | | | Following commit 944585a64f5e ("crypto: x86/aes-ni - remove special handling of AES in PCBC mode"), it's no longer needed for the PCBC template to support wrapping a cipher that has the CRYPTO_ALG_INTERNAL flag set. Thus, remove this now-unused functionality to make PCBC consistent with the other single block cipher templates. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: ofb - convert to skcipher_alloc_instance_simple()Eric Biggers2019-01-111-112/+7
| | | | | | | | | | | | | | | | | | The OFB template just wraps a single block cipher algorithm, so simplify it by converting it to use skcipher_alloc_instance_simple(). Cc: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: keywrap - convert to skcipher APIEric Biggers2019-01-111-133/+65
| | | | | | | | | | | | | | | | | | | | | | Convert the keywrap template from the deprecated "blkcipher" API to the "skcipher" API, taking advantage of skcipher_alloc_instance_simple() to simplify it considerably. Cc: Stephan Mueller <smueller@chronox.de> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: ecb - convert to skcipher APIEric Biggers2019-01-111-115/+36
| | | | | | | | | | | | | | | | | | Convert the ECB template from the deprecated "blkcipher" API to the "skcipher" API, taking advantage of skcipher_alloc_instance_simple() to simplify it considerably. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: ctr - convert to skcipher APIEric Biggers2019-01-111-119/+41
| | | | | | | | | | | | | | | | | | Convert the CTR template from the deprecated "blkcipher" API to the "skcipher" API, taking advantage of skcipher_alloc_instance_simple() to simplify it considerably. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: cfb - convert to skcipher_alloc_instance_simple()Eric Biggers2019-01-111-118/+9
| | | | | | | | | | | | | | | | | | The CFB template just wraps a single block cipher algorithm, so simplify it by converting it to use skcipher_alloc_instance_simple(). Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: cbc - convert to skcipher_alloc_instance_simple()Eric Biggers2019-01-111-118/+13
| | | | | | | | | | | | | | | | The CBC template just wraps a single block cipher algorithm, so simplify it by converting it to use skcipher_alloc_instance_simple(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: skcipher - add helper for simple block cipher modesEric Biggers2019-01-111-0/+131
| | | | | | | | | | | | | | | | | | | | | | | | The majority of skcipher templates (including both the existing ones and the ones remaining to be converted from the "blkcipher" API) just wrap a single block cipher algorithm. This includes cbc, cfb, ctr, ecb, kw, ofb, and pcbc. Add a helper function skcipher_alloc_instance_simple() that handles allocating an skcipher instance for this common case. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: pcbc - remove bogus memcpy()s with src == destEric Biggers2019-01-111-10/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The memcpy()s in the PCBC implementation use walk->iv as both the source and destination, which has undefined behavior. These memcpy()'s are actually unneeded, because walk->iv is already used to hold the previous plaintext block XOR'd with the previous ciphertext block. Thus, walk->iv is already updated to its final value. So remove the broken and unnecessary memcpy()s. Fixes: 91652be5d1b9 ("[CRYPTO] pcbc: Add Propagated CBC template") Cc: <stable@vger.kernel.org> # v2.6.21+ Cc: David Howells <dhowells@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: ofb - fix handling partial blocks and make thread-safeEric Biggers2019-01-112-56/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix multiple bugs in the OFB implementation: 1. It stored the per-request state 'cnt' in the tfm context, which can be used by multiple threads concurrently (e.g. via AF_ALG). 2. It didn't support messages not a multiple of the block cipher size, despite being a stream cipher. 3. It didn't set cra_blocksize to 1 to indicate it is a stream cipher. To fix these, set the 'chunksize' property to the cipher block size to guarantee that when walking through the scatterlist, a partial block can only occur at the end. Then change the implementation to XOR a block at a time at first, then XOR the partial block at the end if needed. This is the same way CTR and CFB are implemented. As a bonus, this also improves performance in most cases over the current approach. Fixes: e497c51896b3 ("crypto: ofb - add output feedback mode") Cc: <stable@vger.kernel.org> # v4.20+ Cc: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: cfb - remove bogus memcpy() with src == destEric Biggers2019-01-111-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The memcpy() in crypto_cfb_decrypt_inplace() uses walk->iv as both the source and destination, which has undefined behavior. It is unneeded because walk->iv is already used to hold the previous ciphertext block; thus, walk->iv is already updated to its final value. So, remove it. Also, note that in-place decryption is the only case where the previous ciphertext block is not directly available. Therefore, as a related cleanup I also updated crypto_cfb_encrypt_segment() to directly use the previous ciphertext block rather than save it into walk->iv. This makes it consistent with in-place encryption and out-of-place decryption; now only in-place decryption is different, because it has to be. Fixes: a7d85e06ed80 ("crypto: cfb - add support for Cipher FeedBack mode") Cc: <stable@vger.kernel.org> # v4.17+ Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: cfb - add missing 'chunksize' propertyEric Biggers2019-01-112-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Like some other block cipher mode implementations, the CFB implementation assumes that while walking through the scatterlist, a partial block does not occur until the end. But the walk is incorrectly being done with a blocksize of 1, as 'cra_blocksize' is set to 1 (since CFB is a stream cipher) but no 'chunksize' is set. This bug causes incorrect encryption/decryption for some scatterlist layouts. Fix it by setting the 'chunksize'. Also extend the CFB test vectors to cover this bug as well as cases where the message length is not a multiple of the block size. Fixes: a7d85e06ed80 ("crypto: cfb - add support for Cipher FeedBack mode") Cc: <stable@vger.kernel.org> # v4.17+ Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * crypto: Kconfig - Fix typo in "pclmul"haco2019-01-111-2/+2
| | | | | | | | | | | | | | Fix typo "plcmul" to "pclmul" Signed-off-by: Huaxuan Mao <minhaco@msn.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | net: crypto set sk to NULL when af_alg_release.Mao Wenan2019-02-181-1/+3
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | KASAN has found use-after-free in sockfs_setattr. The existed commit 6d8c50dcb029 ("socket: close race condition between sock_close() and sockfs_setattr()") is to fix this simillar issue, but it seems to ignore that crypto module forgets to set the sk to NULL after af_alg_release. KASAN report details as below: BUG: KASAN: use-after-free in sockfs_setattr+0x120/0x150 Write of size 4 at addr ffff88837b956128 by task syz-executor0/4186 CPU: 2 PID: 4186 Comm: syz-executor0 Not tainted xxx + #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0xca/0x13e print_address_description+0x79/0x330 ? vprintk_func+0x5e/0xf0 kasan_report+0x18a/0x2e0 ? sockfs_setattr+0x120/0x150 sockfs_setattr+0x120/0x150 ? sock_register+0x2d0/0x2d0 notify_change+0x90c/0xd40 ? chown_common+0x2ef/0x510 chown_common+0x2ef/0x510 ? chmod_common+0x3b0/0x3b0 ? __lock_is_held+0xbc/0x160 ? __sb_start_write+0x13d/0x2b0 ? __mnt_want_write+0x19a/0x250 do_fchownat+0x15c/0x190 ? __ia32_sys_chmod+0x80/0x80 ? trace_hardirqs_on_thunk+0x1a/0x1c __x64_sys_fchownat+0xbf/0x160 ? lockdep_hardirqs_on+0x39a/0x5e0 do_syscall_64+0xc8/0x580 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462589 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb4b2c83c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000104 RAX: ffffffffffffffda RBX: 000000000072bfa0 RCX: 0000000000462589 RDX: 0000000000000000 RSI: 00000000200000c0 RDI: 0000000000000007 RBP: 0000000000000005 R08: 0000000000001000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb4b2c846bc R13: 00000000004bc733 R14: 00000000006f5138 R15: 00000000ffffffff Allocated by task 4185: kasan_kmalloc+0xa0/0xd0 __kmalloc+0x14a/0x350 sk_prot_alloc+0xf6/0x290 sk_alloc+0x3d/0xc00 af_alg_accept+0x9e/0x670 hash_accept+0x4a3/0x650 __sys_accept4+0x306/0x5c0 __x64_sys_accept4+0x98/0x100 do_syscall_64+0xc8/0x580 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 4184: __kasan_slab_free+0x12e/0x180 kfree+0xeb/0x2f0 __sk_destruct+0x4e6/0x6a0 sk_destruct+0x48/0x70 __sk_free+0xa9/0x270 sk_free+0x2a/0x30 af_alg_release+0x5c/0x70 __sock_release+0xd3/0x280 sock_close+0x1a/0x20 __fput+0x27f/0x7f0 task_work_run+0x136/0x1b0 exit_to_usermode_loop+0x1a7/0x1d0 do_syscall_64+0x461/0x580 entry_SYSCALL_64_after_hwframe+0x49/0xbe Syzkaller reproducer: r0 = perf_event_open(&(0x7f0000000000)={0x0, 0x70, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, @perf_config_ext}, 0x0, 0x0, 0xffffffffffffffff, 0x0) r1 = socket$alg(0x26, 0x5, 0x0) getrusage(0x0, 0x0) bind(r1, &(0x7f00000001c0)=@alg={0x26, 'hash\x00', 0x0, 0x0, 'sha256-ssse3\x00'}, 0x80) r2 = accept(r1, 0x0, 0x0) r3 = accept4$unix(r2, 0x0, 0x0, 0x0) r4 = dup3(r3, r0, 0x0) fchownat(r4, &(0x7f00000000c0)='\x00', 0x0, 0x0, 0x1000) Fixes: 6d8c50dcb029 ("socket: close race condition between sock_close() and sockfs_setattr()") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* crypto: sm3 - fix undefined shift by >= width of valueEric Biggers2019-01-101-1/+1
| | | | | | | | | | | | | sm3_compress() calls rol32() with shift >= 32, which causes undefined behavior. This is easily detected by enabling CONFIG_UBSAN. Explicitly AND with 31 to make the behavior well defined. Fixes: 4f0fc1600edb ("crypto: sm3 - add OSCCA SM3 secure hash") Cc: <stable@vger.kernel.org> # v4.15+ Cc: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: adiantum - initialize crypto_spawn::instEric Biggers2019-01-101-0/+4
| | | | | | | | | | | | | | | | crypto_grab_*() doesn't set crypto_spawn::inst, so templates must set it beforehand. Otherwise it will be left NULL, which causes a crash in certain cases where algorithms are dynamically loaded/unloaded. E.g. with CONFIG_CRYPTO_CHACHA20_X86_64=m, the following caused a crash: insmod chacha-x86_64.ko python -c 'import socket; socket.socket(socket.AF_ALG, 5, 0).bind(("skcipher", "adiantum(xchacha12,aes)"))' rmmod chacha-x86_64.ko python -c 'import socket; socket.socket(socket.AF_ALG, 5, 0).bind(("skcipher", "adiantum(xchacha12,aes)"))' Fixes: 059c2a4d8e16 ("crypto: adiantum - add Adiantum support") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: authencesn - Avoid twice completion call in decrypt pathHarsh Jain2019-01-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Authencesn template in decrypt path unconditionally calls aead_request_complete after ahash_verify which leads to following kernel panic in after decryption. [ 338.539800] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 [ 338.548372] PGD 0 P4D 0 [ 338.551157] Oops: 0000 [#1] SMP PTI [ 338.554919] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Tainted: G W I 4.19.7+ #13 [ 338.564431] Hardware name: Supermicro X8ST3/X8ST3, BIOS 2.0 07/29/10 [ 338.572212] RIP: 0010:esp_input_done2+0x350/0x410 [esp4] [ 338.578030] Code: ff 0f b6 68 10 48 8b 83 c8 00 00 00 e9 8e fe ff ff 8b 04 25 04 00 00 00 83 e8 01 48 98 48 8b 3c c5 10 00 00 00 e9 f7 fd ff ff <8b> 04 25 04 00 00 00 83 e8 01 48 98 4c 8b 24 c5 10 00 00 00 e9 3b [ 338.598547] RSP: 0018:ffff911c97803c00 EFLAGS: 00010246 [ 338.604268] RAX: 0000000000000002 RBX: ffff911c4469ee00 RCX: 0000000000000000 [ 338.612090] RDX: 0000000000000000 RSI: 0000000000000130 RDI: ffff911b87c20400 [ 338.619874] RBP: 0000000000000000 R08: ffff911b87c20498 R09: 000000000000000a [ 338.627610] R10: 0000000000000001 R11: 0000000000000004 R12: 0000000000000000 [ 338.635402] R13: ffff911c89590000 R14: ffff911c91730000 R15: 0000000000000000 [ 338.643234] FS: 0000000000000000(0000) GS:ffff911c97800000(0000) knlGS:0000000000000000 [ 338.652047] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 338.658299] CR2: 0000000000000004 CR3: 00000001ec20a000 CR4: 00000000000006f0 [ 338.666382] Call Trace: [ 338.669051] <IRQ> [ 338.671254] esp_input_done+0x12/0x20 [esp4] [ 338.675922] chcr_handle_resp+0x3b5/0x790 [chcr] [ 338.680949] cpl_fw6_pld_handler+0x37/0x60 [chcr] [ 338.686080] chcr_uld_rx_handler+0x22/0x50 [chcr] [ 338.691233] uldrx_handler+0x8c/0xc0 [cxgb4] [ 338.695923] process_responses+0x2f0/0x5d0 [cxgb4] [ 338.701177] ? bitmap_find_next_zero_area_off+0x3a/0x90 [ 338.706882] ? matrix_alloc_area.constprop.7+0x60/0x90 [ 338.712517] ? apic_update_irq_cfg+0x82/0xf0 [ 338.717177] napi_rx_handler+0x14/0xe0 [cxgb4] [ 338.722015] net_rx_action+0x2aa/0x3e0 [ 338.726136] __do_softirq+0xcb/0x280 [ 338.730054] irq_exit+0xde/0xf0 [ 338.733504] do_IRQ+0x54/0xd0 [ 338.736745] common_interrupt+0xf/0xf Fixes: 104880a6b470 ("crypto: authencesn - Convert to new AEAD...") Signed-off-by: Harsh Jain <harsh@chelsio.com> Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* crypto: authenc - fix parsing key with misaligned rta_lenEric Biggers2019-01-101-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Keys for "authenc" AEADs are formatted as an rtattr containing a 4-byte 'enckeylen', followed by an authentication key and an encryption key. crypto_authenc_extractkeys() parses the key to find the inner keys. However, it fails to consider the case where the rtattr's payload is longer than 4 bytes but not 4-byte aligned, and where the key ends before the next 4-byte aligned boundary. In this case, 'keylen -= RTA_ALIGN(rta->rta_len);' underflows to a value near UINT_MAX. This causes a buffer overread and crash during crypto_ahash_setkey(). Fix it by restricting the rtattr payload to the expected size. Reproducer using AF_ALG: #include <linux/if_alg.h> #include <linux/rtnetlink.h> #include <sys/socket.h> int main() { int fd; struct sockaddr_alg addr = { .salg_type = "aead", .salg_name = "authenc(hmac(sha256),cbc(aes))", }; struct { struct rtattr attr; __be32 enckeylen; char keys[1]; } __attribute__((packed)) key = { .attr.rta_len = sizeof(key), .attr.rta_type = 1 /* CRYPTO_AUTHENC_KEYA_PARAM */, }; fd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(fd, (void *)&addr, sizeof(addr)); setsockopt(fd, SOL_ALG, ALG_SET_KEY, &key, sizeof(key)); } It caused: BUG: unable to handle kernel paging request at ffff88007ffdc000 PGD 2e01067 P4D 2e01067 PUD 2e04067 PMD 2e05067 PTE 0 Oops: 0000 [#1] SMP CPU: 0 PID: 883 Comm: authenc Not tainted 4.20.0-rc1-00108-g00c9fe37a7f27 #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014 RIP: 0010:sha256_ni_transform+0xb3/0x330 arch/x86/crypto/sha256_ni_asm.S:155 [...] Call Trace: sha256_ni_finup+0x10/0x20 arch/x86/crypto/sha256_ssse3_glue.c:321 crypto_shash_finup+0x1a/0x30 crypto/shash.c:178 shash_digest_unaligned+0x45/0x60 crypto/shash.c:186 crypto_shash_digest+0x24/0x40 crypto/shash.c:202 hmac_setkey+0x135/0x1e0 crypto/hmac.c:66 crypto_shash_setkey+0x2b/0xb0 crypto/shash.c:66 shash_async_setkey+0x10/0x20 crypto/shash.c:223 crypto_ahash_setkey+0x2d/0xa0 crypto/ahash.c:202 crypto_authenc_setkey+0x68/0x100 crypto/authenc.c:96 crypto_aead_setkey+0x2a/0xc0 crypto/aead.c:62 aead_setkey+0xc/0x10 crypto/algif_aead.c:526 alg_setkey crypto/af_alg.c:223 [inline] alg_setsockopt+0xfe/0x130 crypto/af_alg.c:256 __sys_setsockopt+0x6d/0xd0 net/socket.c:1902 __do_sys_setsockopt net/socket.c:1913 [inline] __se_sys_setsockopt net/socket.c:1910 [inline] __x64_sys_setsockopt+0x1f/0x30 net/socket.c:1910 do_syscall_64+0x4a/0x180 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: e236d4a89a2f ("[CRYPTO] authenc: Move enckeylen into key itself") Cc: <stable@vger.kernel.org> # v2.6.25+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* Merge tag 'kconfig-v4.21' of ↵Linus Torvalds2018-12-291-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - support -y option for merge_config.sh to avoid downgrading =y to =m - remove S_OTHER symbol type, and touch include/config/*.h files correctly - fix file name and line number in lexer warnings - fix memory leak when EOF is encountered in quotation - resolve all shift/reduce conflicts of the parser - warn no new line at end of file - make 'source' statement more strict to take only string literal - rewrite the lexer and remove the keyword lookup table - convert to SPDX License Identifier - compile C files independently instead of including them from zconf.y - fix various warnings of gconfig - misc cleanups * tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kconfig: surround dbg_sym_flags with #ifdef DEBUG to fix gconf warning kconfig: split images.c out of qconf.cc/gconf.c to fix gconf warnings kconfig: add static qualifiers to fix gconf warnings kconfig: split the lexer out of zconf.y kconfig: split some C files out of zconf.y kconfig: convert to SPDX License Identifier kconfig: remove keyword lookup table entirely kconfig: update current_pos in the second lexer kconfig: switch to ASSIGN_VAL state in the second lexer kconfig: stop associating kconf_id with yylval kconfig: refactor end token rules kconfig: stop supporting '.' and '/' in unquoted words treewide: surround Kconfig file paths with double quotes microblaze: surround string default in Kconfig with double quotes kconfig: use T_WORD instead of T_VARIABLE for variables kconfig: use specific tokens instead of T_ASSIGN for assignments kconfig: refactor scanning and parsing "option" properties kconfig: use distinct tokens for type and default properties kconfig: remove redundant token defines kconfig: rename depends_list to comment_option_list ...
| * treewide: surround Kconfig file paths with double quotesMasahiro Yamada2018-12-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Kconfig lexer supports special characters such as '.' and '/' in the parameter context. In my understanding, the reason is just to support bare file paths in the source statement. I do not see a good reason to complicate Kconfig for the room of ambiguity. The majority of code already surrounds file paths with double quotes, and it makes sense since file paths are constant string literals. Make it treewide consistent now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Ingo Molnar <mingo@kernel.org>
* | Merge branch 'linus' of ↵Linus Torvalds2018-12-2737-786/+6297
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add 1472-byte test to tcrypt for IPsec - Reintroduced crypto stats interface with numerous changes - Support incremental algorithm dumps Algorithms: - Add xchacha12/20 - Add nhpoly1305 - Add adiantum - Add streebog hash - Mark cts(cbc(aes)) as FIPS allowed Drivers: - Improve performance of arm64/chacha20 - Improve performance of x86/chacha20 - Add NEON-accelerated nhpoly1305 - Add SSE2 accelerated nhpoly1305 - Add AVX2 accelerated nhpoly1305 - Add support for 192/256-bit keys in gcmaes AVX - Add SG support in gcmaes AVX - ESN for inline IPsec tx in chcr - Add support for CryptoCell 703 in ccree - Add support for CryptoCell 713 in ccree - Add SM4 support in ccree - Add SM3 support in ccree - Add support for chacha20 in caam/qi2 - Add support for chacha20 + poly1305 in caam/jr - Add support for chacha20 + poly1305 in caam/qi2 - Add AEAD cipher support in cavium/nitrox" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (130 commits) crypto: skcipher - remove remnants of internal IV generators crypto: cavium/nitrox - Fix build with !CONFIG_DEBUG_FS crypto: salsa20-generic - don't unnecessarily use atomic walk crypto: skcipher - add might_sleep() to skcipher_walk_virt() crypto: x86/chacha - avoid sleeping under kernel_fpu_begin() crypto: cavium/nitrox - Added AEAD cipher support crypto: mxc-scc - fix build warnings on ARM64 crypto: api - document missing stats member crypto: user - remove unused dump functions crypto: chelsio - Fix wrong error counter increments crypto: chelsio - Reset counters on cxgb4 Detach crypto: chelsio - Handle PCI shutdown event crypto: chelsio - cleanup:send addr as value in function argument crypto: chelsio - Use same value for both channel in single WR crypto: chelsio - Swap location of AAD and IV sent in WR crypto: chelsio - remove set but not used variable 'kctx_len' crypto: ux500 - Use proper enum in hash_set_dma_transfer crypto: ux500 - Use proper enum in cryp_set_dma_transfer crypto: aesni - Add scatter/gather avx stubs, and use them in C crypto: aesni - Introduce partial block macro ..
| * | crypto: skcipher - remove remnants of internal IV generatorsEric Biggers2018-12-235-87/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove dead code related to internal IV generators, which are no longer used since they've been replaced with the "seqiv" and "echainiv" templates. The removed code includes: - The "givcipher" (GIVCIPHER) algorithm type. No algorithms are registered with this type anymore, so it's unneeded. - The "const char *geniv" member of aead_alg, ablkcipher_alg, and blkcipher_alg. A few algorithms still set this, but it isn't used anymore except to show via /proc/crypto and CRYPTO_MSG_GETALG. Just hardcode "<default>" or "<none>" in those cases. - The 'skcipher_givcrypt_request' structure, which is never used. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: salsa20-generic - don't unnecessarily use atomic walkEric Biggers2018-12-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | salsa20-generic doesn't use SIMD instructions or otherwise disable preemption, so passing atomic=true to skcipher_walk_virt() is unnecessary. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: skcipher - add might_sleep() to skcipher_walk_virt()Eric Biggers2018-12-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | skcipher_walk_virt() can still sleep even with atomic=true, since that only affects the later calls to skcipher_walk_done(). But, skcipher_walk_virt() only has to allocate memory for some input data layouts, so incorrectly calling it with preemption disabled can go undetected. Use might_sleep() so that it's detected reliably. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: user - remove unused dump functionsCorentin Labbe2018-12-232-36/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes unused dump functions for crypto_user_stats. There are remains of the copy/paste of crypto_user_base to crypto_user_stat and I forgot to remove them. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: adiantum - fix leaking reference to hash algorithmEric Biggers2018-12-131-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | crypto_alg_mod_lookup() takes a reference to the hash algorithm but crypto_init_shash_spawn() doesn't take ownership of it, hence the reference needs to be dropped in adiantum_create(). Fixes: 059c2a4d8e16 ("crypto: adiantum - add Adiantum support") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: user - support incremental algorithm dumpsEric Biggers2018-12-131-17/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CRYPTO_MSG_GETALG in NLM_F_DUMP mode sometimes doesn't return all registered crypto algorithms, because it doesn't support incremental dumps. crypto_dump_report() only permits itself to be called once, yet the netlink subsystem allocates at most ~64 KiB for the skb being dumped to. Thus only the first recvmsg() returns data, and it may only include a subset of the crypto algorithms even if the user buffer passed to recvmsg() is large enough to hold all of them. Fix this by using one of the arguments in the netlink_callback structure to keep track of the current position in the algorithm list. Then userspace can do multiple recvmsg() on the socket after sending the dump request. This is the way netlink dumps work elsewhere in the kernel; it's unclear why this was different (probably just an oversight). Also fix an integer overflow when calculating the dump buffer size hint. Fixes: a38f7907b926 ("crypto: Add userspace configuration API") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: adiantum - adjust some comments to match latest paperEric Biggers2018-12-132-20/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 2018-11-28 revision of the Adiantum paper has revised some notation: - 'M' was replaced with 'L' (meaning "Left", for the left-hand part of the message) in the definition of Adiantum hashing, to avoid confusion with the full message - ε-almost-∆-universal is now abbreviated as ε-∆U instead of εA∆U - "block" is now used only to mean block cipher and Poly1305 blocks Also, Adiantum hashing was moved from the appendix to the main paper. To avoid confusion, update relevant comments in the code to match. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: xchacha20 - fix comments for test vectorsEric Biggers2018-12-131-8/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kernel's ChaCha20 uses the RFC7539 convention of the nonce being 12 bytes rather than 8, so actually I only appended 12 random bytes (not 16) to its test vectors to form 24-byte nonces for the XChaCha20 test vectors. The other 4 bytes were just from zero-padding the stream position to 8 bytes. Fix the comments above the test vectors. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: xchacha - add test vector from XChaCha20 draft RFCEric Biggers2018-12-131-2/+176
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a draft specification for XChaCha20 being worked on. Add the XChaCha20 test vector from the appendix so that we can be extra sure the kernel's implementation is compatible. I also recomputed the ciphertext with XChaCha12 and added it there too, to keep the tests for XChaCha20 and XChaCha12 in sync. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: x86/chacha - add XChaCha12 supportEric Biggers2018-12-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the x86_64 SIMD implementations of ChaCha20 and XChaCha20 have been refactored to support varying the number of rounds, add support for XChaCha12. This is identical to XChaCha20 except for the number of rounds, which is 12 instead of 20. This can be used by Adiantum. Reviewed-by: Martin Willi <martin@strongswan.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: x86/chacha20 - add XChaCha20 supportEric Biggers2018-12-131-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add an XChaCha20 implementation that is hooked up to the x86_64 SIMD implementations of ChaCha20. This can be used by Adiantum. An SSSE3 implementation of single-block HChaCha20 is also added so that XChaCha20 can use it rather than the generic implementation. This required refactoring the ChaCha permutation into its own function. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: x86/nhpoly1305 - add AVX2 accelerated NHPoly1305Eric Biggers2018-12-131-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a 64-bit AVX2 implementation of NHPoly1305, an ε-almost-∆-universal hash function used in the Adiantum encryption mode. For now, only the NH portion is actually AVX2-accelerated; the Poly1305 part is less performance-critical so is just implemented in C. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: x86/nhpoly1305 - add SSE2 accelerated NHPoly1305Eric Biggers2018-12-131-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a 64-bit SSE2 implementation of NHPoly1305, an ε-almost-∆-universal hash function used in the Adiantum encryption mode. For now, only the NH portion is actually SSE2-accelerated; the Poly1305 part is less performance-critical so is just implemented in C. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: adiantum - propagate CRYPTO_ALG_ASYNC flag to instanceEric Biggers2018-12-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the stream cipher implementation is asynchronous, then the Adiantum instance must be flagged as asynchronous as well. Otherwise someone asking for a synchronous algorithm can get an asynchronous algorithm. There are no asynchronous xchacha12 or xchacha20 implementations yet which makes this largely a theoretical issue, but it should be fixed. Fixes: 059c2a4d8e16 ("crypto: adiantum - add Adiantum support") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: tcrypt - add block size of 1472 to skcipher templateArd Biesheuvel2018-12-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | In order to have better coverage of algorithms operating on block sizes that are in the ballpark of a VPN packet, add 1472 to the block_sizes array. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: user - Add crypto_stats_initCorentin Labbe2018-12-071-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | This patch add the crypto_stats_init() function. This will permit to remove some ifdef from __crypto_register_alg(). Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: user - rename err_cnt parameterCorentin Labbe2018-12-072-28/+28
| | | | | | | | | | | | | | | | | | | | | | | | Since now all crypto stats are on their own structures, it is now useless to have the algorithm name in the err_cnt member. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: user - Split stats in multiple structuresCorentin Labbe2018-12-072-98/+92
| | | | | | | | | | | | | | | | | | | | | Like for userspace, this patch splits stats into multiple structures, one for each algorithm class. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | crypto: user - remove intermediate variableCorentin Labbe2018-12-071-91/+41
| | | | | | | | | | | | | | | | | | | | | | | | The use of the v64 intermediate variable is useless, and removing it bring to much readable code. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-18 19:22:34 +0000