summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/maps
Commit message (Collapse)AuthorAgeFilesLines
* mtd: pmcmsp-flash: Allocating too much in init_msp_flash()Dan Carpenter2016-07-151-3/+3
| | | | | | | | | | | | | | | | | | | There is a cut and paste issue here. The bug is that we are allocating more memory than necessary for msp_maps. We should be allocating enough space for a map_info struct (144 bytes) but we instead allocate enough for an mtd_info struct (1840 bytes). It's a small waste. The other part of this is not harmful but when we allocated msp_flash then we allocated enough space fro a map_info pointer instead of an mtd_info pointer. But since pointers are the same size it works out fine. Anyway, I decided to clean up all three allocations a bit to make them a bit more consistent and clear. Fixes: 68aa0fa87f6d ('[MTD] PMC MSP71xx flash/rootfs mappings') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: maps: sa1100-flash: potential NULL dereferenceDan Carpenter2016-07-151-1/+3
| | | | | | | | We check for NULL but then dereference "info->mtd" on the next line. Fixes: 72169755cf36 ('mtd: maps: sa1100-flash: show parent device in sysfs') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: physmap_of: fix set but unused warningBrian Norris2016-07-091-1/+1
| | | | | | | | | | drivers/mtd/maps/physmap_of.c: In function ‘of_flash_probe’: drivers/mtd/maps/physmap_of.c:165:16: warning: variable ‘p’ set but not used [-Wunused-but-set-variable] This could be a problem if the 'reg' property is not set, since that means 'count' will be uninitialized. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtdLinus Torvalds2016-05-244-29/+10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD updates from Brian Norris: "First cycle with Boris as NAND maintainer! Many (most) bullets stolen from him. Generic: - Migrated NAND LED trigger to be a generic MTD trigger NAND: - Introduction of the "ECC algorithm" concept, to avoid overloading the ECC mode field too much more - Replaced the nand_ecclayout infrastructure with something a little more flexible (finally!) and future proof - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some of this into their own tree as well - Prepare the sunxi NAND driver to receive DMA support - Handle bitflips in erased pages on GPMI revisions that do not support this in hardware. SPI NOR: - Start using the spi_flash_read() API for SPI drivers that support it (i.e., SPI drivers with special memory-mapped flash modes) And other small scattered improvments" * tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits) mtd: spi-nor: support GigaDevice gd25lq64c mtd: nand_bch: fix spelling of "probably" mtd: brcmnand: respect ECC algorithm set by NAND subsystem gpmi-nand: Handle ECC Errors in erased pages Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value mtd: nand: add support for "nand-ecc-algo" DT property mtd: mtd: drop NAND_ECC_SOFT_BCH enum value mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping mtd: nand: read ECC algorithm from the new field mtd: nand: fsmc: validate ECC setup by checking algorithm directly mtd: nand: set ECC algorithm to Hamming on fallback staging: mt29f_spinand: set ECC algorithm explicitly CRIS v32: nand: set ECC algorithm explicitly mtd: nand: atmel: set ECC algorithm explicitly mtd: nand: davinci: set ECC algorithm explicitly mtd: nand: bf5xx: set ECC algorithm explicitly mtd: nand: omap2: Fix high memory dma prefetch transfer mtd: nand: omap2: Start dma request before enabling prefetch mtd: nandsim: add __init attribute mtd: nand: move of_get_nand_xxx() helpers into nand_base.c ...
| * mtd: maps: add __init attributeJulia Lawall2016-04-263-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add __init attribute on functions that are only called from other __init functions and that are not inlined, at least with gcc version 4.8.4 on an x86 machine with allyesconfig. Currently, the functions are put in the .text.unlikely segment. Declaring them as __init will cause them to be put in the .init.text and to disappear after initialization. The result of objdump -x on the functions before the change is as follows: 00000000000001bc l F .text.unlikely 00000000000006a2 ck804xrom_init_one.isra.1 00000000000001aa l F .text.unlikely 0000000000000764 esb2rom_init_one.isra.1 00000000000001db l F .text.unlikely 0000000000000716 ichxrom_init_one.isra.1 And after the change it is as follows: 0000000000000000 l F .init.text 000000000000069d ck804xrom_init_one.isra.1 0000000000000000 l F .init.text 000000000000075f esb2rom_init_one.isra.1 0000000000000000 l F .init.text 0000000000000711 ichxrom_init_one.isra.1 Done with the help of Coccinelle. The semantic patch checks for local static non-init functions that are called from an __init function and are not called from any other function. Note that in each case, the function is stored in the probe field of a pci_driver structure, but this code is under an #if 0. The #if 0s have been unchanged since 2009 at the latest. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: maps: make uclinux.c driver more explicitly non-modularPaul Gortmaker2016-04-251-23/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Kconfig for this support is currently declared with: config MTD_UCLINUX bool "Generic uClinux RAM/ROM filesystem support" ...meaning that it currently is not being built as a module by anyone. Lets remove as much of the modular evidence that we can, so that when reading the driver there is less doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We also replace module.h with moduleparam.h since the file does use a module_param, and leaving it as such is currently the easiest way to remain compatible with existing boot arg use cases. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* | Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds2016-05-201-3/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM updates from Russell King: "Changes included in this pull request: - revert pxa2xx-flash back to using ioremap_cached() and switch memremap() to use arch_memremap_wb() - remove pci=firmware command line argument handling - remove unnecessary arm_dma_set_mask() implementation, the generic implementation will do for ARM - removal of the ARM kallsyms "hack" to work around mode switching veneers and vectors located below PAGE_OFFSET - tidy up build system output a little - add L2 cache power management DT bindings - remove duplicated local_irq_disable() in reboot paths - handle AMBA primecell devices better at registration time with PM domains (needed for Samsung SoCs) - ARM specific preparation to support Keystone II kexec" * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8567/1: cache-uniphier: activate ways for secondary CPUs ARM: 8570/2: Documentation: devicetree: Add PL310 PM bindings ARM: 8569/1: pl2x0: Add OF control of cache power management ARM: 8568/1: reboot: remove duplicated local_irq_disable() ARM: 8566/1: drivers: amba: properly handle devices with power domains ARM: provide arm_has_idmap_alias() helper ARM: kexec: remove 512MB restriction on kexec crashdump ARM: provide improved virt_to_idmap() functionality ARM: kexec: fix crashkernel= handling ARM: 8557/1: specify install, zinstall, and uinstall as PHONY targets ARM: 8562/1: suppress "include/generated/mach-types.h is up to date." ARM: 8553/1: kallsyms: remove --page-offset command line option ARM: 8552/1: kallsyms: remove special lower address limit for CONFIG_ARM ARM: 8555/1: kallsyms: ignore ARM mode switching veneers ARM: 8548/1: dma-mapping: remove arm_dma_set_mask() ARM: 8554/1: kernel: pci: remove pci=firmware command line parameter handling ARM: memremap: implement arch_memremap_wb() memremap: add arch specific hook for MEMREMAP_WB mappings mtd: pxa2xx-flash: switch back from memremap to ioremap_cached ARM: reintroduce ioremap_cached() for creating cached I/O mappings
| * | mtd: pxa2xx-flash: switch back from memremap to ioremap_cachedArd Biesheuvel2016-04-041-3/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 06968a54790d ("mtd: pxa2xx-flash: switch from ioremap_cache to memremap"), since NOR with memory semantics in array mode and RAM are not necessarily the same thing, and architectures may implement ioremap_cached() and memremap() with different memory attributes. For this reason, ioremap_cached() has been brought back from the dead on the ARM side, so switch this driver back to using it instead of memremap(). Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
* | physmap_of: ensure versatile code is reachableArnd Bergmann2016-04-262-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | With the newly added physmap_of_versatile code, we get a build error when physmap_of is in a module, because of_flash_probe_versatile is not exported: ERROR: "of_flash_probe_versatile" [drivers/mtd/maps/physmap_of.ko] undefined! This adds the export, and changes the Makefile so that the code is also put into a loadable module rather than built-in when physmap_of itself is a module. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | mtd: physmap_of: add a hook for Versatile write protectionLinus Walleij2016-04-045-0/+286
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to support device tree probing of Versatile NOR flash chips, there must be a way to add the VPP (write protection) enable/disable callback. The register in question is in the system controllers of these machines. Apart from this quirk, the ARM flash chips are standard CFI flash chips from various vendors. Additionally, the Integrator/AP require you to set up the external bus interface (EBI) to allow writes to the chip select where the flash memory is connected. Solve this by looking for the arm,versatile-flash compatible string in the flash device tree node. In the driver, add a special hook to check for the various Versatile syscons and register a callback for .set_vpp() if this compatible is present. Provide a special Kconfig entry for the addon hook so it will not be compiled in if the Versatile boards are not supported. Stubs in the header file make sure the impact will be zero on other platforms. (Compilers optimze this out.) With this patch, a large slew of ARM board file code can be removed. Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'for-linus-20160112' of git://git.infradead.org/linux-mtdLinus Torvalds2016-01-132-6/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD updates from Brian Norris: "Generic MTD: - populate the MTD device 'of_node' field (and get a proper 'of_node' symlink in sysfs) This yielded some new helper functions, and changes across a variety of drivers - partitioning cleanups, to prepare for better device-tree based partitioning in the future Eliminate a lot of boilerplate for drivers that want to use OF-based partition parsing The DT bindings for this didn't settle yet, so most non-cleanup portions are deferred for a future release NAND: - embed a struct mtd_info inside struct nand_chip This is really long overdue; too many drivers have to do the same silly boilerplate to allocate and link up two "independent" structs, when in fact, everyone is assuming there is an exact 1:1 relationship between a NAND chips struct and its underlying MTD. This aids improved helpers and should make certain abstractions easier in the future. Also causes a lot of churn, helped along by some automated code transformations - add more core support for detecting (and "correcting") bitflips in erased pages; requires opt-in by drivers, but at least we kill a few bad implementations and hopefully stave off future ones - pxa3xx_nand: cleanups, a few fixes, and PM improvements - new JZ4780 NAND driver SPI NOR: - provide default erase function, for controllers that just want to send the SECTOR_ERASE command directly - fix some module auto-loading issues with device tree ("jedec,spi-nor") - error handling fixes - new Mediatek QSPI flash driver Other: - cfi: force valid geometry Kconfig (finally!) This one used to trip up randconfigs occasionally, since bots aren't deterred by big scary "advanced configuration" menus More? Probably. See the commit logs" * tag 'for-linus-20160112' of git://git.infradead.org/linux-mtd: (168 commits) mtd: jz4780_nand: replace if/else blocks with switch/case mtd: nand: jz4780: Update ecc correction error codes mtd: nandsim: use nand_get_controller_data() mtd: jz4780_nand: remove useless mtd->priv = chip assignment staging: mt29f_spinand: make use of nand_set/get_controller_data() helpers mtd: nand: make use of nand_set/get_controller_data() helpers ARM: make use of nand_set/get_controller_data() helpers mtd: nand: add helpers to access ->priv mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs mtd: nand: jz4740: remove custom 'erased check' implementation mtd: nand: diskonchip: remove custom 'erased check' implementation mtd: nand: davinci: remove custom 'erased check' implementation mtd: nand: use nand_check_erased_ecc_chunk in default ECC read functions mtd: nand: return consistent error codes in ecc.correct() implementations doc: dt: mtd: new binding for jz4780-{nand,bch} mtd: cfi_cmdset_0001: fixing memory leak and handling failed kmalloc mtd: spi-nor: wait until lock/unlock operations are ready mtd: tests: consolidate kmalloc/memset 0 call to kzalloc jffs2: use to_delayed_work mtd: nand: assign reasonable default name for NAND drivers ...
| * mtd: physmap_of: assign parent for the concatenated MTDBrian Norris2015-11-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | If there is more than one map region for this device, then the concatenated MTD will not have a parent device assigned to it -- only the sub-devices (which are not actually registered with the framework) will have their parents assigned. Let's assign the concatenated device correctly. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
| * mtd: drop unnecessary partition parser dataBrian Norris2015-11-112-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | We should assign the MTD dev.of_node instead of the parser data field. This gets us the equivalent partition parser behavior with fewer special fields and parameter passing. Also convert several of these to mtd_device_register(), since we don't need the 2nd and 3rd parameters anymore. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
* | drivers/mtd/maps/pcmciamtd.c: __iomem annotationsAl Viro2016-01-041-14/+14
|/ | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* mtd: maps: rbtx4939-flash: fix compile errorBrian Norris2015-10-191-1/+1
| | | | | | | | | | | | | | | | We got the syntax wrong here. Compile tested this time! Error: drivers/mtd/maps/rbtx4939-flash.c: In function 'rbtx4939_flash_probe': >> drivers/mtd/maps/rbtx4939-flash.c:99:11: error: request for member 'dev' in something not a structure or union info->mtd.dev.parent = &dev->dev; ^ Fixes: 9aa7e50276c1 ("mtd: maps: rbtx4939-flash: show parent device in sysfs") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Frans Klaver <fransklaver@gmail.com>
* mtd: maps: sa1100-flash: show parent device in sysfsFrans Klaver2015-10-131-1/+1
| | | | | | | | | | | Fix a bug where mtd parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Incidentally, it seems the owner field in the concatenated mtds is not actually used, so this shouldn't make much of a difference anyway. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: maps: rbtx4939-flash: show parent device in sysfsFrans Klaver2015-10-131-1/+1
| | | | | | | | | Fix a bug where mtd parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: maps: pxa2xx-flash: show parent device in sysfsFrans Klaver2015-10-131-1/+1
| | | | | | | | | Fix a bug where mtd parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: maps: plat_ram: drop owner assignmentFrans Klaver2015-10-131-1/+0
| | | | | | | Owner is automatically set by mtdcore. Make use of that. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: maps: physmap_of: drop owner assignmentFrans Klaver2015-10-131-1/+0
| | | | | | | Owner is automatically set by mtdcore. Make use of that. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: maps: physmap: drop owner assignmentFrans Klaver2015-10-131-1/+0
| | | | | | | Owner is automatically set by mtdcore. Make use of that. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: maps: latch-addr-flash: show parent device in sysfsFrans Klaver2015-10-131-1/+1
| | | | | | | | | Fix a bug where mtd parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: maps: lantiq-flash: show parent device in sysfsFrans Klaver2015-10-131-1/+1
| | | | | | | | | Fix a bug where mtd parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: maps: ixp4xx: show parent device in sysfsFrans Klaver2015-10-131-1/+1
| | | | | | | | | Fix a bug where mtd parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: maps: intel_vr_nor: show parent device in sysfsFrans Klaver2015-10-131-1/+1
| | | | | | | | | Fix a bug where mtd parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: maps: gpio-addr-flash: show parent device in sysfsFrans Klaver2015-10-131-1/+1
| | | | | | | Fix a bug where mtd parent device symlinks aren't shown in sysfs. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: pxa2xx-flash: switch from ioremap_cache to memremapDan Williams2015-10-121-3/+3
| | | | | | | | | | In preparation for deprecating ioremap_cache() convert its usage in pxa2xx-flash to memremap. Cc: David Woodhouse <dwmw2@infradead.org> [brian: also convert iounmap to memunmap] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* pcmciamtd: Add id for PRETEC 4MB SRAMTom Englund2015-09-291-0/+1
| | | | | | | | | | The module pcmciamtd doesn't generate a mtd node for PRETEC 4MB SRAM cards without the id and hash added to pcmciamtd.c Tested on 3 different 4MB pretec sram cards. Signed-off-by: Tom Englund <tomenglund26@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: physmap_of: fix null pointer deference when kzalloc returns nullColin Ian King2015-08-181-0/+6
| | | | | | | | | | | | | static analysis by smatch caught the following error: drivers/mtd/maps/physmap_of.c:135 of_get_probes() error: potential null dereference 'res'. (kzalloc returns null) Check for failed kzalloc and return -ENOMEM in of_flash_probe if this occurs. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nettel: do not ignore mtd_device_register() failure in nettel_init()Alexey Khoroshilov2015-08-181-3/+10
| | | | | | | | | | | If mtd_device_register() fails in nettel_init(), iomap left mapped. The patch adds failure handling for mtd_device_register(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: dc21285: use raw spinlock functions for nw_gpio_lockUwe Kleine-König2015-05-281-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit bd31b85960a7 (which is in 3.2-rc1) nw_gpio_lock is a raw spinlock that needs usage of the corresponding raw functions. This fixes: drivers/mtd/maps/dc21285.c: In function 'nw_en_write': drivers/mtd/maps/dc21285.c:41:340: warning: passing argument 1 of 'spinlock_check' from incompatible pointer type spin_lock_irqsave(&nw_gpio_lock, flags); In file included from include/linux/seqlock.h:35:0, from include/linux/time.h:5, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/mtd/maps/dc21285.c:8: include/linux/spinlock.h:299:102: note: expected 'struct spinlock_t *' but argument is of type 'struct raw_spinlock_t *' static inline raw_spinlock_t *spinlock_check(spinlock_t *lock) ^ drivers/mtd/maps/dc21285.c:43:25: warning: passing argument 1 of 'spin_unlock_irqrestore' from incompatible pointer type spin_unlock_irqrestore(&nw_gpio_lock, flags); ^ In file included from include/linux/seqlock.h:35:0, from include/linux/time.h:5, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/mtd/maps/dc21285.c:8: include/linux/spinlock.h:370:91: note: expected 'struct spinlock_t *' but argument is of type 'struct raw_spinlock_t *' static inline void spin_unlock_irqrestore(spinlock_t *lock, unsigned long flags) Fixes: bd31b85960a7 ("locking, ARM: Annotate low level hw locks as raw") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: lantiq-flash: use default partition parsersBrian Norris2015-05-271-3/+1
| | | | | | The default implementation already probes for cmdlinepart and ofpart. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: maps: Spelling s/reseved/reserved/Geert Uytterhoeven2015-05-213-3/+3
| | | | | Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven2015-05-201-1/+1
| | | | | | | | | | | | | | The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: constify of_device_id arrayFabian Frederick2015-05-061-2/+2
| | | | | | | | of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: ts5500_flash: Fix typo in MODULE_DESCRIPTION in ts5500_flash.cMasanari Iida2015-03-301-1/+1
| | | | | | | | | This patch fixes a spelling typo in MODULE_DESCRIPTION in ts5500_flash.c. Signed-off-by: Masanari Iida <standby24x7@gmail.com> [ Brian: fixed grammar in a spelling patch :) ] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: maps: sa1100-flash: remove incorrect __exit markupsDmitry Torokhov2015-03-301-2/+2
| | | | | | | | | | | Even if bus is not hot-pluggable, the devices can be unbound from the driver via sysfs, so we should not be using __exit annotations on remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: replace CONFIG_8xx by CONFIG_PPC_8xxChristophe Leroy2015-03-301-1/+1
| | | | | | | | | | | | | | | | | | Two config options exist to define powerpc MPC8xx: * CONFIG_PPC_8xx * CONFIG_8xx In addition, CONFIG_PPC_8xx also defines CONFIG_CPM1 as communication co-processor arch/powerpc/platforms/Kconfig.cputype has contained the following comment about CONFIG_8xx item for some years: "# this is temp to handle compat with arch=ppc" It looks like not many places still have that old CONFIG_8xx used, so it is likely to be a good time to get rid of it completely ? Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: physmap_of: Add read-only fallbackJoe Schultz2015-01-091-0/+10
| | | | | | | | | | | | | | Previously, when probing a CFI chip which was write-protected at the hardware level, the probe would fail due to the fact it could not put the chip into QUERY mode. This would result in no MTD devices being created. Add a fallback to probe using the map_rom driver if the user-selected probe fails. Signed-off-by: Joe Schultz <jschultz@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* Merge tag 'for-linus-20141215' of git://git.infradead.org/linux-mtdLinus Torvalds2014-12-172-6/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD updates from Brian Norris: "Summary: - Add device tree support for DoC3 - SPI NOR: Refactoring, for better layering between spi-nor.c and its driver users (e.g., m25p80.c) New flash device support Support 6-byte ID strings - NAND: New NAND driver for Allwinner SoC's (sunxi) GPMI NAND: add support for raw (no ECC) access, for testing purposes Add ATO manufacturer ID A few odd driver fixes - MTD tests: Allow testers to compensate for OOB bitflips in oobtest Fix a torturetest regression - nandsim: Support longer ID byte strings And more" * tag 'for-linus-20141215' of git://git.infradead.org/linux-mtd: (63 commits) mtd: tests: abort torturetest on erase errors mtd: physmap_of: fix potential NULL dereference mtd: spi-nor: allow NULL as chip name and try to auto detect it mtd: nand: gpmi: add raw oob access functions mtd: nand: gpmi: add proper raw access support mtd: nand: gpmi: add gpmi_copy_bits function mtd: spi-nor: factor out write_enable() for erase commands mtd: spi-nor: add support for s25fl128s mtd: spi-nor: remove the jedec_id/ext_id mtd: spi-nor: add id/id_len for flash_info{} mtd: nand: correct the comment of function nand_block_isreserved() jffs2: Drop bogus if in comment mtd: atmel_nand: replace memcpy32_toio/memcpy32_fromio with memcpy mtd: cafe_nand: drop duplicate .write_page implementation mtd: m25p80: Add support for serial flash Spansion S25FL132K MTD: m25p80: fix inconsistency in m25p_ids compared to spi_nor_ids mtd: spi-nor: improve wait-till-ready timeout loop mtd: delete unnecessary checks before two function calls mtd: nand: omap: Fix NAND enumeration on 3430 LDP mtd: nand: add ATO manufacturer info ...
| * mtd: physmap_of: fix potential NULL dereferenceArd Biesheuvel2014-12-121-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | On device remove, when testing the cmtd field of an of_flash struct to decide whether it is a concatenated device or not, we get a false positive on cmtd == NULL, and dereference it subsequently. This may occur if of_flash_remove() is called from the cleanup path of of_flash_probe(). Instead, test for NULL first, and only then perform the test for a concatenated device. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * mtd: bfin-async-flash: Remove unused variableAaron Sierra2014-10-221-1/+0
| | | | | | | | | | | | | | | | | | | | Avoid the following compile warning: drivers/mtd/maps/bfin-async-flash.c: In function 'bfin_flash_probe': drivers/mtd/maps/bfin-async-flash.c:129: warning: unused variable 'ret' Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* | mtd: maps: drop owner assignment from platform_driversWolfram Sang2014-10-209-9/+0
|/ | | | | | | A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* mtd: physmap_of: Add non-obsolete map_rom probeAaron Sierra2014-09-221-0/+4
| | | | | | | | | | | | Previously, the only way to map a NOR device as a simple ROM was to use the obsolete "direct-mapped" compatible binding (which further requires device_type = "nor" and probe-type = "NOR" properties). This patch adds an "mtd-rom" compatible binding to the "map_rom" probe type. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: physmap_of: Fix ROM support via OFAaron Sierra2014-09-221-1/+1
| | | | | | | | | The "ROM" and unknown probe types within the obsolete "direct-mapped" probe function used the nonexistent "mtd_rom" probe instead of the intended "map_rom". Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: gpio_flash: handle case where offset + len exceeds the window sizeAaron Wu2014-08-191-14/+28
| | | | | | | | | | | | | Fix the bug in handling gpio flash read/write when offset + len from MTD exceeds the window size Signed-off-by: Aaron Wu <Aaron.wu@analog.com> [Brian: made some commentary edits. Also note that the BUG_ON() was provably false for all non-negative inputs (since x % y <= x), so we dropped it.] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: maps: solutionengine: drop excess dependencyBrian Norris2014-08-191-1/+1
| | | | | | | Already depends on SOLUTION_ENGINE, so we don't need the SUPERH dependency too. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: use NULL instead of 0 for an addressMartin Kepplinger2014-08-191-1/+1
| | | | | | | | Use NULL instead of 0 when returning an address. This fixes a sparse warning. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: maps: rbtx4939-flash: delete an unused variable in rbtx4939_flash_removeAtsushi Nemoto2014-07-021-2/+0
| | | | | Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: maps: remove check for CONFIG_MTD_SUPERH_RESERVEPaul Bolle2014-05-281-24/+1
| | | | | | | | | | Since (a few releases before) v2.6.0 there have been checks for CONFIG_MTD_SUPERH_RESERVE. One check is still present. But a Kconfig symbol MTD_SUPERH_RESERVE has never been added. So a few lines of dead code can be removed. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-17 14:41:57 +0000