summaryrefslogtreecommitdiffstats
path: root/fs/pnode.c
Commit message (Collapse)AuthorAgeFilesLines
* mnt: Add a per mount namespace limit on the number of mountsEric W. Biederman2016-09-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CAI Qian <caiqian@redhat.com> pointed out that the semantics of shared subtrees make it possible to create an exponentially increasing number of mounts in a mount namespace. mkdir /tmp/1 /tmp/2 mount --make-rshared / for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done Will create create 2^20 or 1048576 mounts, which is a practical problem as some people have managed to hit this by accident. As such CVE-2016-6213 was assigned. Ian Kent <raven@themaw.net> described the situation for autofs users as follows: > The number of mounts for direct mount maps is usually not very large because of > the way they are implemented, large direct mount maps can have performance > problems. There can be anywhere from a few (likely case a few hundred) to less > than 10000, plus mounts that have been triggered and not yet expired. > > Indirect mounts have one autofs mount at the root plus the number of mounts that > have been triggered and not yet expired. > > The number of autofs indirect map entries can range from a few to the common > case of several thousand and in rare cases up to between 30000 and 50000. I've > not heard of people with maps larger than 50000 entries. > > The larger the number of map entries the greater the possibility for a large > number of active mounts so it's not hard to expect cases of a 1000 or somewhat > more active mounts. So I am setting the default number of mounts allowed per mount namespace at 100,000. This is more than enough for any use case I know of, but small enough to quickly stop an exponential increase in mounts. Which should be perfect to catch misconfigurations and malfunctioning programs. For anyone who needs a higher limit this can be changed by writing to the new /proc/sys/fs/mount-max sysctl. Tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
* propogate_mnt: Handle the first propogated copy being a slaveEric W. Biederman2016-05-051-11/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the first propgated copy was a slave the following oops would result: > BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 > IP: [<ffffffff811fba4e>] propagate_one+0xbe/0x1c0 > PGD bacd4067 PUD bac66067 PMD 0 > Oops: 0000 [#1] SMP > Modules linked in: > CPU: 1 PID: 824 Comm: mount Not tainted 4.6.0-rc5userns+ #1523 > Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 > task: ffff8800bb0a8000 ti: ffff8800bac3c000 task.ti: ffff8800bac3c000 > RIP: 0010:[<ffffffff811fba4e>] [<ffffffff811fba4e>] propagate_one+0xbe/0x1c0 > RSP: 0018:ffff8800bac3fd38 EFLAGS: 00010283 > RAX: 0000000000000000 RBX: ffff8800bb77ec00 RCX: 0000000000000010 > RDX: 0000000000000000 RSI: ffff8800bb58c000 RDI: ffff8800bb58c480 > RBP: ffff8800bac3fd48 R08: 0000000000000001 R09: 0000000000000000 > R10: 0000000000001ca1 R11: 0000000000001c9d R12: 0000000000000000 > R13: ffff8800ba713800 R14: ffff8800bac3fda0 R15: ffff8800bb77ec00 > FS: 00007f3c0cd9b7e0(0000) GS:ffff8800bfb00000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 0000000000000010 CR3: 00000000bb79d000 CR4: 00000000000006e0 > Stack: > ffff8800bb77ec00 0000000000000000 ffff8800bac3fd88 ffffffff811fbf85 > ffff8800bac3fd98 ffff8800bb77f080 ffff8800ba713800 ffff8800bb262b40 > 0000000000000000 0000000000000000 ffff8800bac3fdd8 ffffffff811f1da0 > Call Trace: > [<ffffffff811fbf85>] propagate_mnt+0x105/0x140 > [<ffffffff811f1da0>] attach_recursive_mnt+0x120/0x1e0 > [<ffffffff811f1ec3>] graft_tree+0x63/0x70 > [<ffffffff811f1f6b>] do_add_mount+0x9b/0x100 > [<ffffffff811f2c1a>] do_mount+0x2aa/0xdf0 > [<ffffffff8117efbe>] ? strndup_user+0x4e/0x70 > [<ffffffff811f3a45>] SyS_mount+0x75/0xc0 > [<ffffffff8100242b>] do_syscall_64+0x4b/0xa0 > [<ffffffff81988f3c>] entry_SYSCALL64_slow_path+0x25/0x25 > Code: 00 00 75 ec 48 89 0d 02 22 22 01 8b 89 10 01 00 00 48 89 05 fd 21 22 01 39 8e 10 01 00 00 0f 84 e0 00 00 00 48 8b 80 d8 00 00 00 <48> 8b 50 10 48 89 05 df 21 22 01 48 89 15 d0 21 22 01 8b 53 30 > RIP [<ffffffff811fba4e>] propagate_one+0xbe/0x1c0 > RSP <ffff8800bac3fd38> > CR2: 0000000000000010 > ---[ end trace 2725ecd95164f217 ]--- This oops happens with the namespace_sem held and can be triggered by non-root users. An all around not pleasant experience. To avoid this scenario when finding the appropriate source mount to copy stop the walk up the mnt_master chain when the first source mount is encountered. Further rewrite the walk up the last_source mnt_master chain so that it is clear what is going on. The reason why the first source mount is special is that it it's mnt_parent is not a mount in the dest_mnt propagation tree, and as such termination conditions based up on the dest_mnt mount propgation tree do not make sense. To avoid other kinds of confusion last_dest is not changed when computing last_source. last_dest is only used once in propagate_one and that is above the point of the code being modified, so changing the global variable is meaningless and confusing. Cc: stable@vger.kernel.org fixes: f2ebb3a921c1ca1e2ddd9242e95a1989a50c4c68 ("smarter propagate_mnt()") Reported-by: Tycho Andersen <tycho.andersen@canonical.com> Reviewed-by: Seth Forshee <seth.forshee@canonical.com> Tested-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
* fs/pnode.c: treat zero mnt_group_id-s as unequalMaxim Patlasov2016-02-201-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | propagate_one(m) calculates "type" argument for copy_tree() like this: > if (m->mnt_group_id == last_dest->mnt_group_id) { > type = CL_MAKE_SHARED; > } else { > type = CL_SLAVE; > if (IS_MNT_SHARED(m)) > type |= CL_MAKE_SHARED; > } The "type" argument then governs clone_mnt() behavior with respect to flags and mnt_master of new mount. When we iterate through a slave group, it is possible that both current "m" and "last_dest" are not shared (although, both are slaves, i.e. have non-NULL mnt_master-s). Then the comparison above erroneously makes new mount shared and sets its mnt_master to last_source->mnt_master. The patch fixes the problem by handling zero mnt_group_id-s as though they are unequal. The similar problem exists in the implementation of "else" clause above when we have to ascend upward in the master/slave tree by calling: > last_source = last_source->mnt_master; > last_dest = last_source->mnt_parent; proper number of times. The last step is governed by "n->mnt_group_id != last_dest->mnt_group_id" condition that may lie if both are zero. The patch fixes this case in the same way as the former one. [AV: don't open-code an obvious helper...] Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* mnt: Don't propagate unmounts to locked mountsEric W. Biederman2015-04-021-3/+29
| | | | | | | | | | | | | | | | If the first mount in shared subtree is locked don't unmount the shared subtree. This is ensured by walking through the mounts parents before children and marking a mount as unmountable if it is not locked or it is locked but it's parent is marked. This allows recursive mount detach to propagate through a set of mounts when unmounting them would not reveal what is under any locked mount. Cc: stable@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
* mnt: On an unmount propagate clearing of MNT_LOCKEDEric W. Biederman2015-04-021-0/+20
| | | | | | | | | | | | | | A prerequisite of calling umount_tree is that the point where the tree is mounted at is valid to unmount. If we are propagating the effect of the unmount clear MNT_LOCKED in every instance where the same filesystem is mounted on the same mountpoint in the mount tree, as we know (by virtue of the fact that umount_tree was called) that it is safe to reveal what is at that mountpoint. Cc: stable@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
* mnt: Delay removal from the mount hash.Eric W. Biederman2015-04-021-1/+0
| | | | | | | | | | | | | | | | - Modify __lookup_mnt_hash_last to ignore mounts that have MNT_UMOUNTED set. - Don't remove mounts from the mount hash table in propogate_umount - Don't remove mounts from the mount hash table in umount_tree before the entire list of mounts to be umounted is selected. - Remove mounts from the mount hash table as the last thing that happens in the case where a mount has a parent in umount_tree. Mounts without parents are not hashed (by definition). This paves the way for delaying removal from the mount hash table even farther and fixing the MNT_LOCKED vs MNT_DETACH issue. Cc: stable@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
* mnt: Add MNT_UMOUNT flagEric W. Biederman2015-04-021-0/+1
| | | | | | | | | | | In some instances it is necessary to know if the the unmounting process has begun on a mount. Add MNT_UMOUNT to make that reliably testable. This fix gets used in fixing locked mounts in MNT_DETACH Cc: stable@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
* mnt: In umount_tree reuse mnt_list instead of mnt_hashEric W. Biederman2015-04-021-3/+3
| | | | | | | | | | | | | umount_tree builds a list of mounts that need to be unmounted. Utilize mnt_list for this purpose instead of mnt_hash. This begins to allow keeping a mount on the mnt_hash after it is unmounted, which is necessary for a properly functioning MNT_LOCKED implementation. The fact that mnt_list is an ordinary list makding available list_move is nice bonus. Cc: stable@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
* mnt: Move the clear of MNT_LOCKED from copy_tree to it's callers.Eric W. Biederman2014-12-021-0/+1
| | | | | | | | | | | | | | Clear MNT_LOCKED in the callers of copy_tree except copy_mnt_ns, and collect_mounts. In copy_mnt_ns it is necessary to create an exact copy of a mount tree, so not clearing MNT_LOCKED is important. Similarly collect_mounts is used to take a snapshot of the mount tree for audit logging purposes and auditing using a faithful copy of the tree is important. This becomes particularly significant when we start setting MNT_LOCKED on rootfs to prevent it from being unmounted. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
* get rid of propagate_umount() mistakenly treating slaves as busy.Al Viro2014-08-301-0/+1
| | | | | | | | | The check in __propagate_umount() ("has somebody explicitly mounted something on that slave?") is done *before* taking the already doomed victims out of the child lists. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* smarter propagate_mnt()Al Viro2014-04-011-79/+119
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current mainline has copies propagated to *all* nodes, then tears down the copies we made for nodes that do not contain counterparts of the desired mountpoint. That sets the right propagation graph for the copies (at teardown time we move the slaves of removed node to a surviving peer or directly to master), but we end up paying a fairly steep price in useless allocations. It's fairly easy to create a situation where N calls of mount(2) create exactly N bindings, with O(N^2) vfsmounts allocated and freed in process. Fortunately, it is possible to avoid those allocations/freeings. The trick is to create copies in the right order and find which one would've eventually become a master with the current algorithm. It turns out to be possible in O(nodes getting propagation) time and with no extra allocations at all. One part is that we need to make sure that eventual master will be created before its slaves, so we need to walk the propagation tree in a different order - by peer groups. And iterate through the peers before dealing with the next group. Another thing is finding the (earlier) copy that will be a master of one we are about to create; to do that we are (temporary) marking the masters of mountpoints we are attaching the copies to. Either we are in a peer of the last mountpoint we'd dealt with, or we have the following situation: we are attaching to mountpoint M, the last copy S_0 had been attached to M_0 and there are sequences S_0...S_n, M_0...M_n such that S_{i+1} is a master of S_{i}, S_{i} mounted on M{i} and we need to create a slave of the first S_{k} such that M is getting propagation from M_{k}. It means that the master of M_{k} will be among the sequence of masters of M. On the other hand, the nearest marked node in that sequence will either be the master of M_{k} or the master of M_{k-1} (the latter - in the case if M_{k-1} is a slave of something M gets propagation from, but in a wrong peer group). So we go through the sequence of masters of M until we find a marked one (P). Let N be the one before it. Then we go through the sequence of masters of S_0 until we find one (say, S) mounted on a node D that has P as master and check if D is a peer of N. If it is, S will be the master of new copy, if not - the master of S will be. That's it for the hard part; the rest is fairly simple. Iterator is in next_group(), handling of one prospective mountpoint is propagate_one(). It seems to survive all tests and gives a noticably better performance than the current mainline for setups that are seriously using shared subtrees. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* switch mnt_hash to hlistAl Viro2014-03-301-11/+15
| | | | | | | | | | | | | fixes RCU bug - walking through hlist is safe in face of element moves, since it's self-terminating. Cyclic lists are not - if we end up jumping to another hash chain, we'll loop infinitely without ever hitting the original list head. [fix for dumb braino folded] Spotted by: Max Kellermann <mk@cm4all.com> Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* split __lookup_mnt() in two functionsAl Viro2013-10-241-3/+3
| | | | | | | | Instead of passing the direction as argument (and checking it on every step through the hash chain), just have separate __lookup_mnt() and __lookup_mnt_last(). And use the standard iterators... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* new helpers: lock_mount_hash/unlock_mount_hashAl Viro2013-10-241-2/+2
| | | | | | | aka br_write_{lock,unlock} of vfsmount_lock. Inlines in fs/mount.h, vfsmount_lock extern moved over there as well. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* namespace.c: get rid of mnt_ghostsAl Viro2013-10-241-2/+1
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: Fix invalid ida_remove() callTakashi Iwai2013-05-311-1/+2
| | | | | | | | | | | | | When the group id of a shared mount is not allocated, the umount still tries to call mnt_release_group_id(), which eventually hits a kernel warning at ida_remove() spewing a message like: ida_remove called for id=0 which is not allocated. This patch fixes the bug simply checking the group id in the caller. Reported-by: Cristian Rodríguez <crrodriguez@opensuse.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* Merge branch 'for-linus' of ↵Linus Torvalds2013-05-011-6/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
| * switch unlock_mount() to namespace_unlock(), convert all umount_tree() callersAl Viro2013-04-091-3/+1
| | | | | | | | | | | | | | which allows to kill the last argument of umount_tree() and make release_mounts() static. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * get rid of full-hash scan on detaching vfsmountsAl Viro2013-04-091-3/+3
| | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | vfs: Carefully propogate mounts across user namespacesEric W. Biederman2013-03-271-0/+6
|/ | | | | | | | | | | | | | | | | | | | | As a matter of policy MNT_READONLY should not be changable if the original mounter had more privileges than creator of the mount namespace. Add the flag CL_UNPRIVILEGED to note when we are copying a mount from a mount namespace that requires more privileges to a mount namespace that requires fewer privileges. When the CL_UNPRIVILEGED flag is set cause clone_mnt to set MNT_NO_REMOUNT if any of the mnt flags that should never be changed are set. This protects both mount propagation and the initial creation of a less privileged mount namespace. Cc: stable@vger.kernel.org Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
* VFS: Make clone_mnt()/copy_tree()/collect_mounts() return errorsDavid Howells2012-07-141-2/+3
| | | | | | | | | | | | | | | | | | copy_tree() can theoretically fail in a case other than ENOMEM, but always returns NULL which is interpreted by callers as -ENOMEM. Change it to return an explicit error. Also change clone_mnt() for consistency and because union mounts will add new error cases. Thanks to Andreas Gruenbacher <agruen@suse.de> for a bug fix. [AV: folded braino fix by Dan Carpenter] Original-author: Valerie Aurora <vaurora@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Cc: Valerie Aurora <valerie.aurora@gmail.com> Cc: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* brlocks/lglocks: API cleanupsAndi Kleen2012-05-291-2/+2
| | | | | | | | | | | | | | | | | | | | | lglocks and brlocks are currently generated with some complicated macros in lglock.h. But there's no reason to not just use common utility functions and put all the data into a common data structure. In preparation, this patch changes the API to look more like normal function calls with pointers, not magic macros. The patch is rather large because I move over all users in one go to keep it bisectable. This impacts the VFS somewhat in terms of lines changed. But no actual behaviour change. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: switch pnode.h macros to struct mount *Al Viro2012-01-031-3/+3
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: move the rest of int fields to struct mountAl Viro2012-01-031-1/+1
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: mnt_id/mnt_group_id movedAl Viro2012-01-031-2/+2
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: mnt_ns moved to struct mountAl Viro2012-01-031-5/+5
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: take mnt_share/mnt_slave/mnt_slave_list and mnt_expire to struct mountAl Viro2012-01-031-15/+15
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: and now we can make ->mnt_master point to struct mountAl Viro2012-01-031-9/+9
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: take mnt_master to struct mountAl Viro2012-01-031-13/+13
| | | | | | make IS_MNT_SLAVE take struct mount * at the same time Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: spread struct mount - remaining argument of mnt_set_mountpoint()Al Viro2012-01-031-1/+1
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: spread struct mount - propagate_mnt()Al Viro2012-01-031-6/+6
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: spread struct mount - shared subtree iteratorsAl Viro2012-01-031-50/+47
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: spread struct mount - get_dominating_id / do_make_slaveAl Viro2012-01-031-29/+29
| | | | | | | next pile of horrors, similar to mnt_parent one; this time it's mnt_master. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: take mnt_child/mnt_mounts to struct mountAl Viro2012-01-031-3/+3
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: spread struct mount - work with countersAl Viro2012-01-031-1/+1
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: move mnt_mountpoint to struct mountAl Viro2012-01-031-2/+2
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: now it can be done - make mnt_parent point to struct mountAl Viro2012-01-031-8/+8
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: mnt_parent moved to struct mountAl Viro2012-01-031-2/+2
| | | | | | the second victim... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: spread struct mount - is_path_reachableAl Viro2012-01-031-5/+5
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: spread struct mount - do_umount/propagate_mount_busyAl Viro2012-01-031-8/+8
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: spread struct mount mnt_set_mountpoint child argumentAl Viro2012-01-031-1/+1
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: spread struct mount - clone_mnt/copy_tree argumentAl Viro2012-01-031-1/+1
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: spread struct mount - umount_tree argumentAl Viro2012-01-031-1/+1
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: the first spoils - mnt_hash movedAl Viro2012-01-031-5/+5
| | | | | | taken out of struct vfsmount into struct mount Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: spread struct mount - clone_mnt/copy_tree resultAl Viro2012-01-031-7/+8
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: spread struct mount - change_mnt_propagation/set_mnt_sharedAl Viro2012-01-031-6/+6
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: spread struct mount - mount group id handlingAl Viro2012-01-031-1/+1
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: spread struct mount - __propagate_umount() argumentAl Viro2012-01-031-7/+7
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: spread struct mount - __lookup_mnt() resultAl Viro2012-01-031-6/+7
| | | | | | switch __lookup_mnt() to returning struct mount *; callers adjusted. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* vfs: more mnt_parent cleanupsAl Viro2012-01-031-15/+0
| | | | | | | | | | | | a) mount --move is checking that ->mnt_parent is non-NULL before looking if that parent happens to be shared; ->mnt_parent is never NULL and it's not even an misspelled !mnt_has_parent() b) pivot_root open-codes is_path_reachable(), poorly. c) so does path_is_under(), while we are at it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>